diff options
Diffstat (limited to 'hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rtc_ex.h')
| -rw-r--r-- | hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rtc_ex.h | 1048 |
1 files changed, 0 insertions, 1048 deletions
diff --git a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rtc_ex.h b/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rtc_ex.h deleted file mode 100644 index 6cdc954..0000000 --- a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rtc_ex.h +++ /dev/null @@ -1,1048 +0,0 @@ -/**
- ******************************************************************************
- * @file stm32f0xx_hal_rtc_ex.h
- * @author MCD Application Team
- * @brief Header file of RTC HAL Extended module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F0xx_HAL_RTC_EX_H
-#define __STM32F0xx_HAL_RTC_EX_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_hal_def.h"
-
-/** @addtogroup STM32F0xx_HAL_Driver
- * @{
- */
-
-/** @defgroup RTCEx RTCEx
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-
-/** @defgroup RTCEx_Exported_Types RTCEx Exported Types
- * @{
- */
-
-/**
- * @brief RTC Tamper structure definition
- */
-typedef struct
-{
- uint32_t Tamper; /*!< Specifies the Tamper Pin.
- This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */
-
- uint32_t Trigger; /*!< Specifies the Tamper Trigger.
- This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */
-
- uint32_t Filter; /*!< Specifies the RTC Filter Tamper.
- This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */
-
- uint32_t SamplingFrequency; /*!< Specifies the sampling frequency.
- This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */
-
- uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration .
- This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */
-
- uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp .
- This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */
-
- uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection.
- This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */
-} RTC_TamperTypeDef;
-/**
- * @}
- */
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants
- * @{
- */
-
-/** @defgroup RTCEx_Output_selection_Definitions RTCEx Output Selection Definition
- * @{
- */
-#define RTC_OUTPUT_DISABLE 0x00000000U
-#define RTC_OUTPUT_ALARMA 0x00200000U
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
-#define RTC_OUTPUT_WAKEUP 0x00600000U
-#endif
-
-/**
- * @}
- */
-
-#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB)
-/** @defgroup RTCEx_Backup_Registers_Definitions RTCEx Backup Registers Definition
- * @{
- */
-#define RTC_BKP_DR0 0x00000000U
-#define RTC_BKP_DR1 0x00000001U
-#define RTC_BKP_DR2 0x00000002U
-#define RTC_BKP_DR3 0x00000003U
-#define RTC_BKP_DR4 0x00000004U
-/**
- * @}
- */
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB) */
-
-/** @defgroup RTCEx_Time_Stamp_Edges_definitions RTCEx Time Stamp Edges definition
- * @{
- */
-#define RTC_TIMESTAMPEDGE_RISING 0x00000000U
-#define RTC_TIMESTAMPEDGE_FALLING 0x00000008U
-
-/**
- * @}
- */
-
-/** @defgroup RTCEx_TimeStamp_Pin_Selections RTCEx TimeStamp Pin Selection
- * @{
- */
-#define RTC_TIMESTAMPPIN_DEFAULT 0x00000000U
-
-/**
- * @}
- */
-
-
-/** @defgroup RTCEx_Tamper_Pins_Definitions RTCEx Tamper Pins Definition
- * @{
- */
-#define RTC_TAMPER_1 RTC_TAFCR_TAMP1E
-#define RTC_TAMPER_2 RTC_TAFCR_TAMP2E
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
-#define RTC_TAMPER_3 RTC_TAFCR_TAMP3E
-#endif
-
-/**
- * @}
- */
-
-
-
-/** @defgroup RTCEx_Tamper_Trigger_Definitions RTCEx Tamper Trigger Definition
- * @{
- */
-#define RTC_TAMPERTRIGGER_RISINGEDGE 0x00000000U
-#define RTC_TAMPERTRIGGER_FALLINGEDGE 0x00000002U
-#define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE
-#define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE
-
-
-/**
- * @}
- */
-
-/** @defgroup RTCEx_Tamper_Filter_Definitions RTCEx Tamper Filter Definition
- * @{
- */
-#define RTC_TAMPERFILTER_DISABLE 0x00000000U /*!< Tamper filter is disabled */
-
-#define RTC_TAMPERFILTER_2SAMPLE 0x00000800U /*!< Tamper is activated after 2
- consecutive samples at the active level */
-#define RTC_TAMPERFILTER_4SAMPLE 0x00001000U /*!< Tamper is activated after 4
- consecutive samples at the active level */
-#define RTC_TAMPERFILTER_8SAMPLE 0x00001800U /*!< Tamper is activated after 8
- consecutive samples at the active level. */
-
-/**
- * @}
- */
-
-/** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTCEx Tamper Sampling Frequencies Definition
- * @{
- */
-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 0x00000000U /*!< Each of the tamper inputs are sampled
- with a frequency = RTCCLK / 32768 */
-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 0x00000100U /*!< Each of the tamper inputs are sampled
- with a frequency = RTCCLK / 16384 */
-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 0x00000200U /*!< Each of the tamper inputs are sampled
- with a frequency = RTCCLK / 8192 */
-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 0x00000300U /*!< Each of the tamper inputs are sampled
- with a frequency = RTCCLK / 4096 */
-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 0x00000400U /*!< Each of the tamper inputs are sampled
- with a frequency = RTCCLK / 2048 */
-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 0x00000500U /*!< Each of the tamper inputs are sampled
- with a frequency = RTCCLK / 1024 */
-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 0x00000600U /*!< Each of the tamper inputs are sampled
- with a frequency = RTCCLK / 512 */
-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 0x00000700U /*!< Each of the tamper inputs are sampled
- with a frequency = RTCCLK / 256 */
-
-/**
- * @}
- */
-
-/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTCEx Tamper Pin Precharge Duration Definition
- * @{
- */
-#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK 0x00000000U /*!< Tamper pins are pre-charged before
- sampling during 1 RTCCLK cycle */
-#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK 0x00002000U /*!< Tamper pins are pre-charged before
- sampling during 2 RTCCLK cycles */
-#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK 0x00004000U /*!< Tamper pins are pre-charged before
- sampling during 4 RTCCLK cycles */
-#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK 0x00006000U /*!< Tamper pins are pre-charged before
- sampling during 8 RTCCLK cycles */
-
-/**
- * @}
- */
-
-/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTCEx Tamper TimeStampOnTamperDetection Definition
- * @{
- */
-#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE ((uint32_t)RTC_TAFCR_TAMPTS) /*!< TimeStamp on Tamper Detection event saved */
-#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE 0x00000000U /*!< TimeStamp on Tamper Detection event is not saved */
-
-/**
- * @}
- */
-
-/** @defgroup RTCEx_Tamper_Pull_UP_Definitions RTCEx Tamper Pull UP Definition
- * @{
- */
-#define RTC_TAMPER_PULLUP_ENABLE 0x00000000U /*!< Tamper pins are pre-charged before sampling */
-#define RTC_TAMPER_PULLUP_DISABLE ((uint32_t)RTC_TAFCR_TAMPPUDIS) /*!< Tamper pins are not pre-charged before sampling */
-
-/**
- * @}
- */
-
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
-/** @defgroup RTCEx_Wakeup_Timer_Definitions RTCEx Wakeup Timer Definition
- * @{
- */
-#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 0x00000000U
-#define RTC_WAKEUPCLOCK_RTCCLK_DIV8 0x00000001U
-#define RTC_WAKEUPCLOCK_RTCCLK_DIV4 0x00000002U
-#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 0x00000003U
-#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS 0x00000004U
-#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS 0x00000006U
-
-
-/**
- * @}
- */
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
-
-/** @defgroup RTCEx_Smooth_calib_period_Definitions RTCEx Smooth calib period Definition
- * @{
- */
-#define RTC_SMOOTHCALIB_PERIOD_32SEC 0x00000000U /*!< If RTCCLK = 32768 Hz, Smooth calibation
- period is 32s, else 2exp20 RTCCLK seconds */
-#define RTC_SMOOTHCALIB_PERIOD_16SEC 0x00002000U /*!< If RTCCLK = 32768 Hz, Smooth calibation
- period is 16s, else 2exp19 RTCCLK seconds */
-#define RTC_SMOOTHCALIB_PERIOD_8SEC 0x00004000U /*!< If RTCCLK = 32768 Hz, Smooth calibation
- period is 8s, else 2exp18 RTCCLK seconds */
-
-/**
- * @}
- */
-
-/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTCEx Smooth calib Plus pulses Definition
- * @{
- */
-#define RTC_SMOOTHCALIB_PLUSPULSES_SET 0x00008000U /*!< The number of RTCCLK pulses added
- during a X -second window = Y - CALM[8:0]
- with Y = 512, 256, 128 when X = 32, 16, 8 */
-#define RTC_SMOOTHCALIB_PLUSPULSES_RESET 0x00000000U /*!< The number of RTCCLK pulses subbstited
- during a 32-second window = CALM[8:0] */
-
-/**
- * @}
- */
-/** @defgroup RTCEx_Calib_Output_selection_Definitions RTCEx Calib Output selection Definitions
- * @{
- */
-#define RTC_CALIBOUTPUT_512HZ 0x00000000U
-#define RTC_CALIBOUTPUT_1HZ 0x00080000U
-
-/**
- * @}
- */
-
-/** @defgroup RTCEx_Add_1_Second_Parameter_Definition RTCEx Add 1 Second Parameter Definition
- * @{
- */
-#define RTC_SHIFTADD1S_RESET 0x00000000U
-#define RTC_SHIFTADD1S_SET 0x80000000U
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported macros -----------------------------------------------------------*/
-/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros
- * @{
- */
-
-/* ---------------------------------WAKEUPTIMER---------------------------------*/
-/** @defgroup RTCEx_WakeUp_Timer RTC WakeUp Timer
- * @{
- */
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
-/**
- * @brief Enable the RTC WakeUp Timer peripheral.
- * @param __HANDLE__ specifies the RTC handle.
- * @retval None
- */
-#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))
-
-/**
- * @brief Disable the RTC WakeUp Timer peripheral.
- * @param __HANDLE__ specifies the RTC handle.
- * @retval None
- */
-#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))
-
-/**
- * @brief Enable the RTC WakeUpTimer interrupt.
- * @param __HANDLE__ specifies the RTC handle.
- * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be enabled.
- * This parameter can be:
- * @arg RTC_IT_WUT: WakeUpTimer interrupt
- * @retval None
- */
-#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
-
-/**
- * @brief Disable the RTC WakeUpTimer interrupt.
- * @param __HANDLE__ specifies the RTC handle.
- * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be disabled.
- * This parameter can be:
- * @arg RTC_IT_WUT: WakeUpTimer interrupt
- * @retval None
- */
-#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
-
-/**
- * @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
- * @param __HANDLE__ specifies the RTC handle.
- * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt to check.
- * This parameter can be:
- * @arg RTC_IT_WUT: WakeUpTimer interrupt
- * @retval None
- */
-#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET) ? SET : RESET)
-
-/**
- * @brief Check whether the specified RTC Wake Up timer interrupt has been enabled or not.
- * @param __HANDLE__ specifies the RTC handle.
- * @param __INTERRUPT__ specifies the RTC Wake Up timer interrupt sources to check.
- * This parameter can be:
- * @arg RTC_IT_WUT: WakeUpTimer interrupt
- * @retval None
- */
-#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
-
-/**
- * @brief Get the selected RTC WakeUpTimer's flag status.
- * @param __HANDLE__ specifies the RTC handle.
- * @param __FLAG__ specifies the RTC WakeUpTimer Flag is pending or not.
- * This parameter can be:
- * @arg RTC_FLAG_WUTF
- * @arg RTC_FLAG_WUTWF
- * @retval None
- */
-#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
-
-/**
- * @brief Clear the RTC Wake Up timer's pending flags.
- * @param __HANDLE__ specifies the RTC handle.
- * @param __FLAG__ specifies the RTC WakeUpTimer Flag to clear.
- * This parameter can be:
- * @arg RTC_FLAG_WUTF
- * @retval None
- */
-#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
-
-/* WAKE-UP TIMER EXTI */
-/* ------------------ */
-/**
- * @brief Enable interrupt on the RTC WakeUp Timer associated Exti line.
- * @retval None
- */
-#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
-
-/**
- * @brief Disable interrupt on the RTC WakeUp Timer associated Exti line.
- * @retval None
- */
-#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
-
-/**
- * @brief Enable event on the RTC WakeUp Timer associated Exti line.
- * @retval None.
- */
-#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
-
-/**
- * @brief Disable event on the RTC WakeUp Timer associated Exti line.
- * @retval None.
- */
-#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
-
-/**
- * @brief Enable falling edge trigger on the RTC WakeUp Timer associated Exti line.
- * @retval None.
- */
-#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
-
-/**
- * @brief Disable falling edge trigger on the RTC WakeUp Timer associated Exti line.
- * @retval None.
- */
-#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
-
-/**
- * @brief Enable rising edge trigger on the RTC WakeUp Timer associated Exti line.
- * @retval None.
- */
-#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
-
-/**
- * @brief Disable rising edge trigger on the RTC WakeUp Timer associated Exti line.
- * @retval None.
- */
-#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
-
-/**
- * @brief Enable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line.
- * @retval None.
- */
-#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE();
-
-/**
- * @brief Disable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line.
- * This parameter can be:
- * @retval None.
- */
-#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE();
-
-/**
- * @brief Check whether the RTC WakeUp Timer associated Exti line interrupt flag is set or not.
- * @retval Line Status.
- */
-#define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
-
-/**
- * @brief Clear the RTC WakeUp Timer associated Exti line flag.
- * @retval None.
- */
-#define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
-
-/**
- * @brief Generate a Software interrupt on the RTC WakeUp Timer associated Exti line.
- * @retval None.
- */
-#define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
-/**
- * @}
- */
-
-/* ---------------------------------TIMESTAMP---------------------------------*/
-/** @defgroup RTCEx_Timestamp RTC Timestamp
- * @{
- */
-/**
- * @brief Enable the RTC TimeStamp peripheral.
- * @param __HANDLE__ specifies the RTC handle.
- * @retval None
- */
-#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))
-
-/**
- * @brief Disable the RTC TimeStamp peripheral.
- * @param __HANDLE__ specifies the RTC handle.
- * @retval None
- */
-#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))
-
-/**
- * @brief Enable the RTC TimeStamp interrupt.
- * @param __HANDLE__ specifies the RTC handle.
- * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt source to be enabled.
- * This parameter can be:
- * @arg RTC_IT_TS: TimeStamp interrupt
- * @retval None
- */
-#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
-
-/**
- * @brief Disable the RTC TimeStamp interrupt.
- * @param __HANDLE__ specifies the RTC handle.
- * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt source to be disabled.
- * This parameter can be:
- * @arg RTC_IT_TS: TimeStamp interrupt
- * @retval None
- */
-#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
-
-/**
- * @brief Check whether the specified RTC TimeStamp interrupt has occurred or not.
- * @param __HANDLE__ specifies the RTC handle.
- * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt to check.
- * This parameter can be:
- * @arg RTC_IT_TS: TimeStamp interrupt
- * @retval None
- */
-#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)
-
-/**
- * @brief Check whether the specified RTC Time Stamp interrupt has been enabled or not.
- * @param __HANDLE__ specifies the RTC handle.
- * @param __INTERRUPT__ specifies the RTC Time Stamp interrupt source to check.
- * This parameter can be:
- * @arg RTC_IT_TS: TimeStamp interrupt
- * @retval None
- */
-#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
-
-/**
- * @brief Get the selected RTC TimeStamp's flag status.
- * @param __HANDLE__ specifies the RTC handle.
- * @param __FLAG__ specifies the RTC TimeStamp Flag is pending or not.
- * This parameter can be:
- * @arg RTC_FLAG_TSF
- * @arg RTC_FLAG_TSOVF
- * @retval None
- */
-#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
-
-/**
- * @brief Clear the RTC Time Stamp's pending flags.
- * @param __HANDLE__ specifies the RTC handle.
- * @param __FLAG__ specifies the RTC Alarm Flag to clear.
- * This parameter can be:
- * @arg RTC_FLAG_TSF
- * @retval None
- */
-#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
-
-/**
- * @}
- */
-
-/* ---------------------------------TAMPER------------------------------------*/
-/** @defgroup RTCEx_Tamper RTC Tamper
- * @{
- */
-
-/**
- * @brief Enable the RTC Tamper1 input detection.
- * @param __HANDLE__ specifies the RTC handle.
- * @retval None
- */
-#define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP1E))
-
-/**
- * @brief Disable the RTC Tamper1 input detection.
- * @param __HANDLE__ specifies the RTC handle.
- * @retval None
- */
-#define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP1E))
-
-/**
- * @brief Enable the RTC Tamper2 input detection.
- * @param __HANDLE__ specifies the RTC handle.
- * @retval None
- */
-#define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP2E))
-
-/**
- * @brief Disable the RTC Tamper2 input detection.
- * @param __HANDLE__ specifies the RTC handle.
- * @retval None
- */
-#define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP2E))
-
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
-/**
- * @brief Enable the RTC Tamper3 input detection.
- * @param __HANDLE__ specifies the RTC handle.
- * @retval None
- */
-#define __HAL_RTC_TAMPER3_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP3E))
-
-/**
- * @brief Disable the RTC Tamper3 input detection.
- * @param __HANDLE__ specifies the RTC handle.
- * @retval None
- */
-#define __HAL_RTC_TAMPER3_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP3E))
-
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
-/**
- * @brief Enable the RTC Tamper interrupt.
- * @param __HANDLE__ specifies the RTC handle.
- * @param __INTERRUPT__ specifies the RTC Tamper interrupt sources to be enabled.
- * This parameter can be any combination of the following values:
- * @arg RTC_IT_TAMP: Tamper interrupt
- * @retval None
- */
-#define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAFCR |= (__INTERRUPT__))
-
-/**
- * @brief Disable the RTC Tamper interrupt.
- * @param __HANDLE__ specifies the RTC handle.
- * @param __INTERRUPT__ specifies the RTC Tamper interrupt sources to be disabled.
- * This parameter can be any combination of the following values:
- * @arg RTC_IT_TAMP: Tamper interrupt
- * @retval None
- */
-#define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAFCR &= ~(__INTERRUPT__))
-
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
-/**
- * @brief Check whether the specified RTC Tamper interrupt has occurred or not.
- * @param __HANDLE__ specifies the RTC handle.
- * @param __INTERRUPT__ specifies the RTC Tamper interrupt to check.
- * This parameter can be:
- * @arg RTC_IT_TAMP1: Tamper1 interrupt
- * @arg RTC_IT_TAMP2: Tamper2 interrupt
- * @arg RTC_IT_TAMP3: Tamper3 interrupt
- * @retval None
- */
-#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)
-#else
-
-/**
- * @brief Check whether the specified RTC Tamper interrupt has occurred or not.
- * @param __HANDLE__ specifies the RTC handle.
- * @param __INTERRUPT__ specifies the RTC Tamper interrupt to check.
- * This parameter can be:
- * @arg RTC_IT_TAMP1: Tamper1 interrupt
- * @arg RTC_IT_TAMP2: Tamper2 interrupt
- * @retval None
- */
-#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)
-
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
-
-/**
- * @brief Check whether the specified RTC Tamper interrupt has been enabled or not.
- * @param __HANDLE__ specifies the RTC handle.
- * @param __INTERRUPT__ specifies the RTC Tamper interrupt source to check.
- * This parameter can be:
- * @arg RTC_IT_TAMP: Tamper interrupt
- * @retval None
- */
-#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAFCR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
-
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
-/**
- * @brief Get the selected RTC Tamper's flag status.
- * @param __HANDLE__ specifies the RTC handle.
- * @param __FLAG__ specifies the RTC Tamper Flag is pending or not.
- * This parameter can be:
- * @arg RTC_FLAG_TAMP1F
- * @arg RTC_FLAG_TAMP2F
- * @arg RTC_FLAG_TAMP3F
- * @retval None
- */
-#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
-
-
-/**
- * @brief Clear the RTC Tamper's pending flags.
- * @param __HANDLE__ specifies the RTC handle.
- * @param __FLAG__ specifies the RTC Tamper Flag to clear.
- * This parameter can be:
- * @arg RTC_FLAG_TAMP1F
- * @arg RTC_FLAG_TAMP2F
- * @arg RTC_FLAG_TAMP3F
- * @retval None
- */
-#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
-
-#else
-
-/**
- * @brief Get the selected RTC Tamper's flag status.
- * @param __HANDLE__ specifies the RTC handle.
- * @param __FLAG__ specifies the RTC Tamper Flag is pending or not.
- * This parameter can be:
- * @arg RTC_FLAG_TAMP1F
- * @arg RTC_FLAG_TAMP2F
- * @retval None
- */
-#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
-
-
-/**
- * @brief Clear the RTC Tamper's pending flags.
- * @param __HANDLE__ specifies the RTC handle.
- * @param __FLAG__ specifies the RTC Tamper Flag to clear.
- * This parameter can be:
- * @arg RTC_FLAG_TAMP1F
- * @arg RTC_FLAG_TAMP2F
- * @retval None
- */
-#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
-
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
-/**
- * @}
- */
-
-/* --------------------------TAMPER/TIMESTAMP---------------------------------*/
-/** @defgroup RTCEx_Tamper_Timestamp EXTI RTC Tamper Timestamp EXTI
- * @{
- */
-
-/* TAMPER TIMESTAMP EXTI */
-/* --------------------- */
-/**
- * @brief Enable interrupt on the RTC Tamper and Timestamp associated Exti line.
- * @retval None
- */
-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
-
-/**
- * @brief Disable interrupt on the RTC Tamper and Timestamp associated Exti line.
- * @retval None
- */
-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
-
-/**
- * @brief Enable event on the RTC Tamper and Timestamp associated Exti line.
- * @retval None.
- */
-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
-
-/**
- * @brief Disable event on the RTC Tamper and Timestamp associated Exti line.
- * @retval None.
- */
-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
-
-/**
- * @brief Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
- * @retval None.
- */
-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
-
-/**
- * @brief Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
- * @retval None.
- */
-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
-
-/**
- * @brief Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
- * @retval None.
- */
-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
-
-/**
- * @brief Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
- * @retval None.
- */
-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
-
-/**
- * @brief Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
- * @retval None.
- */
-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE();
-
-/**
- * @brief Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
- * This parameter can be:
- * @retval None.
- */
-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE();
-
-/**
- * @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not.
- * @retval Line Status.
- */
-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
-
-/**
- * @brief Clear the RTC Tamper and Timestamp associated Exti line flag.
- * @retval None.
- */
-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
-
-/**
- * @brief Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line
- * @retval None.
- */
-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
-/**
- * @}
- */
-
-/* ------------------------------Calibration----------------------------------*/
-/** @defgroup RTCEx_Calibration RTC Calibration
- * @{
- */
-
-/**
- * @brief Enable the RTC calibration output.
- * @param __HANDLE__ specifies the RTC handle.
- * @retval None
- */
-#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE))
-
-/**
- * @brief Disable the calibration output.
- * @param __HANDLE__ specifies the RTC handle.
- * @retval None
- */
-#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))
-
-/**
- * @brief Enable the clock reference detection.
- * @param __HANDLE__ specifies the RTC handle.
- * @retval None
- */
-#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))
-
-/**
- * @brief Disable the clock reference detection.
- * @param __HANDLE__ specifies the RTC handle.
- * @retval None
- */
-#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))
-
-/**
- * @brief Get the selected RTC shift operation's flag status.
- * @param __HANDLE__ specifies the RTC handle.
- * @param __FLAG__ specifies the RTC shift operation Flag is pending or not.
- * This parameter can be:
- * @arg RTC_FLAG_SHPF
- * @retval None
- */
-#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions
- * @{
- */
-
-/* RTC TimeStamp and Tamper functions *****************************************/
-/** @defgroup RTCEx_Exported_Functions_Group1 Extended RTC TimeStamp and Tamper functions
- * @{
- */
-
-HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
-HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
-HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc);
-HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format);
-
-HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper);
-HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper);
-HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
-void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc);
-
-void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
-void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
-void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc);
-#endif
-void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
-HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
-HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
-HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
-HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
-#endif
-/**
- * @}
- */
-
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
-/* RTC Wake-up functions ******************************************************/
-/** @defgroup RTCEx_Exported_Functions_Group2 Extended RTC Wake-up functions
- * @{
- */
-
-HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
-HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
-uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc);
-uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc);
-void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc);
-void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc);
-HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
-#endif
-/**
- * @}
- */
-
-/* Extended Control functions ************************************************/
-/** @defgroup RTCEx_Exported_Functions_Group3 Extended Peripheral Control functions
- * @{
- */
-
-#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB)
-void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
-uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB) */
-
-HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue);
-HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS);
-HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput);
-HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc);
-HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc);
-HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc);
-HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc);
-HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc);
-/**
- * @}
- */
-
-/* Extended RTC features functions *******************************************/
-
-/**
- * @}
- */
-
-/* Private types -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private constants ---------------------------------------------------------*/
-/** @defgroup RTCEx_Private_Constants RTCEx Private Constants
- * @{
- */
-#define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT ((uint32_t)EXTI_IMR_MR19) /*!< External interrupt line 19 Connected to the RTC Tamper and Time Stamp events */
-#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT ((uint32_t)EXTI_IMR_MR20) /*!< External interrupt line 20 Connected to the RTC Wakeup event */
-/**
- * @}
- */
-
-/* Private macros ------------------------------------------------------------*/
-/** @defgroup RTCEx_Private_Macros RTCEx Private Macros
- * @{
- */
-
-/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters
- * @{
- */
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
-#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \
- ((OUTPUT) == RTC_OUTPUT_ALARMA) || \
- ((OUTPUT) == RTC_OUTPUT_WAKEUP))
-#else
-#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \
- ((OUTPUT) == RTC_OUTPUT_ALARMA))
-#endif
-
-#define IS_RTC_BKP(BKP) ((BKP) < (uint32_t) RTC_BKP_NUMBER)
-
-#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \
- ((EDGE) == RTC_TIMESTAMPEDGE_FALLING))
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
-#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & (uint32_t)0xFFFFFFD6U) == 0x00U) && ((TAMPER) != (uint32_t)RESET))
-
-#else
-#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & (uint32_t)0xFFFFFFF6U) == 0x00U) && ((TAMPER) != (uint32_t)RESET))
-
-#endif
-
-#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_DEFAULT))
-
-
-#define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \
- ((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \
- ((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) || \
- ((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL))
-#define IS_RTC_TAMPER_FILTER(FILTER) (((FILTER) == RTC_TAMPERFILTER_DISABLE) || \
- ((FILTER) == RTC_TAMPERFILTER_2SAMPLE) || \
- ((FILTER) == RTC_TAMPERFILTER_4SAMPLE) || \
- ((FILTER) == RTC_TAMPERFILTER_8SAMPLE))
-#define IS_RTC_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \
- ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \
- ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \
- ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \
- ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \
- ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \
- ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \
- ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256))
-#define IS_RTC_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \
- ((DURATION) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \
- ((DURATION) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \
- ((DURATION) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK))
-#define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \
- ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE))
-#define IS_RTC_TAMPER_PULLUP_STATE(STATE) (((STATE) == RTC_TAMPER_PULLUP_ENABLE) || \
- ((STATE) == RTC_TAMPER_PULLUP_DISABLE))
-#define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \
- ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \
- ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \
- ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \
- ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \
- ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS))
-
-#define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= 0xFFFFU)
-
-
-#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \
- ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \
- ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC))
-#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \
- ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET))
-
-
-#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FFU)
-#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \
- ((SEL) == RTC_SHIFTADD1S_SET))
-#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFFU)
-#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \
- ((OUTPUT) == RTC_CALIBOUTPUT_1HZ))
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F0xx_HAL_RTC_EX_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
|