Move firmware into subdirectory

1 files changed, 0 insertions, 1048 deletions

diff --git a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rtc_ex.h b/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rtc_ex.h
deleted file mode 100644
index 6cdc954..0000000
--- a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rtc_ex.h
+++ /dev/null
@@ -1,1048 +0,0 @@
-/**

-  ******************************************************************************

-  * @file    stm32f0xx_hal_rtc_ex.h

-  * @author  MCD Application Team

-  * @brief   Header file of RTC HAL Extended module.

-  ******************************************************************************

-  * @attention

-  *

-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.

-  * All rights reserved.</center></h2>

-  *

-  * This software component is licensed by ST under BSD 3-Clause license,

-  * the "License"; You may not use this file except in compliance with the

-  * License. You may obtain a copy of the License at:

-  *                        opensource.org/licenses/BSD-3-Clause

-  *

-  ******************************************************************************

-  */

-

-/* Define to prevent recursive inclusion -------------------------------------*/

-#ifndef __STM32F0xx_HAL_RTC_EX_H

-#define __STM32F0xx_HAL_RTC_EX_H

-

-#ifdef __cplusplus

-extern "C" {

-#endif

-

-/* Includes ------------------------------------------------------------------*/

-#include "stm32f0xx_hal_def.h"

-

-/** @addtogroup STM32F0xx_HAL_Driver

-  * @{

-  */

-

-/** @defgroup RTCEx RTCEx

-  * @{

-  */

-

-/* Exported types ------------------------------------------------------------*/

-

-/** @defgroup RTCEx_Exported_Types RTCEx Exported Types

-  * @{

-  */

-

-/**

-  * @brief  RTC Tamper structure definition

-  */

-typedef struct

-{

-  uint32_t Tamper;                      /*!< Specifies the Tamper Pin.

-                                             This parameter can be a value of @ref  RTCEx_Tamper_Pins_Definitions */

-

-  uint32_t Trigger;                     /*!< Specifies the Tamper Trigger.

-                                             This parameter can be a value of @ref  RTCEx_Tamper_Trigger_Definitions */

-

-  uint32_t Filter;                      /*!< Specifies the RTC Filter Tamper.

-                                             This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */

-

-  uint32_t SamplingFrequency;           /*!< Specifies the sampling frequency.

-                                             This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */

-

-  uint32_t PrechargeDuration;           /*!< Specifies the Precharge Duration .

-                                             This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */

-

-  uint32_t TamperPullUp;                /*!< Specifies the Tamper PullUp .

-                                             This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */

-

-  uint32_t TimeStampOnTamperDetection;  /*!< Specifies the TimeStampOnTamperDetection.

-                                             This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */

-} RTC_TamperTypeDef;

-/**

-  * @}

-  */

-

-/* Exported constants --------------------------------------------------------*/

-/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants

-  * @{

-  */

-

-/** @defgroup RTCEx_Output_selection_Definitions RTCEx Output Selection Definition

-  * @{

-  */

-#define RTC_OUTPUT_DISABLE             0x00000000U

-#define RTC_OUTPUT_ALARMA              0x00200000U

-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)

-#define RTC_OUTPUT_WAKEUP              0x00600000U

-#endif

-

-/**

-  * @}

-  */

-

-#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB)

-/** @defgroup RTCEx_Backup_Registers_Definitions RTCEx Backup Registers Definition

-  * @{

-  */

-#define RTC_BKP_DR0                       0x00000000U

-#define RTC_BKP_DR1                       0x00000001U

-#define RTC_BKP_DR2                       0x00000002U

-#define RTC_BKP_DR3                       0x00000003U

-#define RTC_BKP_DR4                       0x00000004U

-/**

-  * @}

-  */

-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB) */

-

-/** @defgroup RTCEx_Time_Stamp_Edges_definitions RTCEx Time Stamp Edges definition

-  * @{

-  */

-#define RTC_TIMESTAMPEDGE_RISING          0x00000000U

-#define RTC_TIMESTAMPEDGE_FALLING         0x00000008U

-

-/**

-  * @}

-  */

-

-/** @defgroup RTCEx_TimeStamp_Pin_Selections RTCEx TimeStamp Pin Selection

-  * @{

-  */

-#define RTC_TIMESTAMPPIN_DEFAULT              0x00000000U

-

-/**

-  * @}

-  */

-

-

-/** @defgroup RTCEx_Tamper_Pins_Definitions RTCEx Tamper Pins Definition

-  * @{

-  */

-#define RTC_TAMPER_1                    RTC_TAFCR_TAMP1E

-#define RTC_TAMPER_2                    RTC_TAFCR_TAMP2E

-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)

-#define RTC_TAMPER_3                    RTC_TAFCR_TAMP3E

-#endif

-

-/**

-  * @}

-  */

-

-

-

-/** @defgroup RTCEx_Tamper_Trigger_Definitions RTCEx Tamper Trigger Definition

-  * @{

-  */

-#define RTC_TAMPERTRIGGER_RISINGEDGE       0x00000000U

-#define RTC_TAMPERTRIGGER_FALLINGEDGE      0x00000002U

-#define RTC_TAMPERTRIGGER_LOWLEVEL         RTC_TAMPERTRIGGER_RISINGEDGE

-#define RTC_TAMPERTRIGGER_HIGHLEVEL        RTC_TAMPERTRIGGER_FALLINGEDGE

-

-

-/**

-  * @}

-  */

-

-/** @defgroup RTCEx_Tamper_Filter_Definitions RTCEx Tamper Filter Definition

-  * @{

-  */

-#define RTC_TAMPERFILTER_DISABLE   0x00000000U  /*!< Tamper filter is disabled */

-

-#define RTC_TAMPERFILTER_2SAMPLE   0x00000800U  /*!< Tamper is activated after 2

-                                                                consecutive samples at the active level */

-#define RTC_TAMPERFILTER_4SAMPLE   0x00001000U  /*!< Tamper is activated after 4

-                                                                consecutive samples at the active level */

-#define RTC_TAMPERFILTER_8SAMPLE   0x00001800U  /*!< Tamper is activated after 8

-                                                                consecutive samples at the active level. */

-

-/**

-  * @}

-  */

-

-/** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTCEx Tamper Sampling Frequencies Definition

-  * @{

-  */

-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768  0x00000000U  /*!< Each of the tamper inputs are sampled

-                                                                             with a frequency =  RTCCLK / 32768 */

-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384  0x00000100U  /*!< Each of the tamper inputs are sampled

-                                                                             with a frequency =  RTCCLK / 16384 */

-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192   0x00000200U  /*!< Each of the tamper inputs are sampled

-                                                                             with a frequency =  RTCCLK / 8192  */

-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096   0x00000300U  /*!< Each of the tamper inputs are sampled

-                                                                             with a frequency =  RTCCLK / 4096  */

-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048   0x00000400U  /*!< Each of the tamper inputs are sampled

-                                                                             with a frequency =  RTCCLK / 2048  */

-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024   0x00000500U  /*!< Each of the tamper inputs are sampled

-                                                                             with a frequency =  RTCCLK / 1024  */

-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512    0x00000600U  /*!< Each of the tamper inputs are sampled

-                                                                             with a frequency =  RTCCLK / 512   */

-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256    0x00000700U  /*!< Each of the tamper inputs are sampled

-                                                                             with a frequency =  RTCCLK / 256   */

-

-/**

-  * @}

-  */

-

-/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTCEx Tamper Pin Precharge Duration Definition

-  * @{

-  */

-#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK 0x00000000U  /*!< Tamper pins are pre-charged before

-                                                                         sampling during 1 RTCCLK cycle */

-#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK 0x00002000U  /*!< Tamper pins are pre-charged before

-                                                                         sampling during 2 RTCCLK cycles */

-#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK 0x00004000U  /*!< Tamper pins are pre-charged before

-                                                                         sampling during 4 RTCCLK cycles */

-#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK 0x00006000U  /*!< Tamper pins are pre-charged before

-                                                                         sampling during 8 RTCCLK cycles */

-

-/**

-  * @}

-  */

-

-/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTCEx Tamper TimeStampOnTamperDetection Definition

-  * @{

-  */

-#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE  ((uint32_t)RTC_TAFCR_TAMPTS)  /*!< TimeStamp on Tamper Detection event saved */

-#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE 0x00000000U        /*!< TimeStamp on Tamper Detection event is not saved */

-

-/**

-  * @}

-  */

-

-/** @defgroup RTCEx_Tamper_Pull_UP_Definitions RTCEx Tamper Pull UP Definition

-  * @{

-  */

-#define RTC_TAMPER_PULLUP_ENABLE  0x00000000U            /*!< Tamper pins are pre-charged before sampling */

-#define RTC_TAMPER_PULLUP_DISABLE ((uint32_t)RTC_TAFCR_TAMPPUDIS)   /*!< Tamper pins are not pre-charged before sampling */

-

-/**

-  * @}

-  */

-

-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)

-/** @defgroup RTCEx_Wakeup_Timer_Definitions RTCEx Wakeup Timer Definition

-  * @{

-  */

-#define RTC_WAKEUPCLOCK_RTCCLK_DIV16        0x00000000U

-#define RTC_WAKEUPCLOCK_RTCCLK_DIV8         0x00000001U

-#define RTC_WAKEUPCLOCK_RTCCLK_DIV4         0x00000002U

-#define RTC_WAKEUPCLOCK_RTCCLK_DIV2         0x00000003U

-#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS      0x00000004U

-#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS      0x00000006U

-

-

-/**

-  * @}

-  */

-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */

-

-/** @defgroup RTCEx_Smooth_calib_period_Definitions RTCEx Smooth calib period Definition

-  * @{

-  */

-#define RTC_SMOOTHCALIB_PERIOD_32SEC   0x00000000U /*!<  If RTCCLK = 32768 Hz, Smooth calibation

-                                                                    period is 32s,  else 2exp20 RTCCLK seconds */

-#define RTC_SMOOTHCALIB_PERIOD_16SEC   0x00002000U /*!<  If RTCCLK = 32768 Hz, Smooth calibation

-                                                                    period is 16s, else 2exp19 RTCCLK seconds */

-#define RTC_SMOOTHCALIB_PERIOD_8SEC    0x00004000U /*!<  If RTCCLK = 32768 Hz, Smooth calibation

-                                                                    period is 8s, else 2exp18 RTCCLK seconds */

-

-/**

-  * @}

-  */

-

-/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTCEx Smooth calib Plus pulses Definition

-  * @{

-  */

-#define RTC_SMOOTHCALIB_PLUSPULSES_SET    0x00008000U /*!<  The number of RTCCLK pulses added

-                                                                       during a X -second window = Y - CALM[8:0]

-                                                                       with Y = 512, 256, 128 when X = 32, 16, 8 */

-#define RTC_SMOOTHCALIB_PLUSPULSES_RESET  0x00000000U /*!<  The number of RTCCLK pulses subbstited

-                                                                       during a 32-second window =   CALM[8:0] */

-

-/**

-  * @}

-  */

-/** @defgroup RTCEx_Calib_Output_selection_Definitions RTCEx Calib Output selection Definitions

- * @{

- */

-#define RTC_CALIBOUTPUT_512HZ            0x00000000U

-#define RTC_CALIBOUTPUT_1HZ              0x00080000U

-

-/**

-  * @}

-  */

-

-/** @defgroup RTCEx_Add_1_Second_Parameter_Definition RTCEx Add 1 Second Parameter Definition

-  * @{

-  */

-#define RTC_SHIFTADD1S_RESET      0x00000000U

-#define RTC_SHIFTADD1S_SET        0x80000000U

-

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-/* Exported macros -----------------------------------------------------------*/

-/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros

-  * @{

-  */

-

-/* ---------------------------------WAKEUPTIMER---------------------------------*/

-/** @defgroup RTCEx_WakeUp_Timer RTC WakeUp Timer

-  * @{

-  */

-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)

-/**

-  * @brief  Enable the RTC WakeUp Timer peripheral.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @retval None

-  */

-#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__)                      ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))

-

-/**

-  * @brief  Disable the RTC WakeUp Timer peripheral.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @retval None

-  */

-#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__)                     ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))

-

-/**

-  * @brief  Enable the RTC WakeUpTimer interrupt.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @param  __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be enabled.

-  *         This parameter can be:

-  *            @arg RTC_IT_WUT: WakeUpTimer interrupt

-  * @retval None

-  */

-#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__)    ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))

-

-/**

-  * @brief  Disable the RTC WakeUpTimer interrupt.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @param  __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be disabled.

-  *         This parameter can be:

-  *            @arg RTC_IT_WUT: WakeUpTimer interrupt

-  * @retval None

-  */

-#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__)   ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))

-

-/**

-  * @brief  Check whether the specified RTC WakeUpTimer interrupt has occurred or not.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @param  __INTERRUPT__ specifies the RTC WakeUpTimer interrupt to check.

-  *         This parameter can be:

-  *            @arg RTC_IT_WUT:  WakeUpTimer interrupt

-  * @retval None

-  */

-#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__)       (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET) ? SET : RESET)

-

-/**

-  * @brief  Check whether the specified RTC Wake Up timer interrupt has been enabled or not.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @param  __INTERRUPT__ specifies the RTC Wake Up timer interrupt sources to check.

-  *         This parameter can be:

-  *            @arg RTC_IT_WUT:  WakeUpTimer interrupt

-  * @retval None

-  */

-#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)   (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)

-

-/**

-  * @brief  Get the selected RTC WakeUpTimer's flag status.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @param  __FLAG__ specifies the RTC WakeUpTimer Flag is pending or not.

-  *          This parameter can be:

-  *             @arg RTC_FLAG_WUTF

-  *             @arg RTC_FLAG_WUTWF

-  * @retval None

-  */

-#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__)   (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)

-

-/**

-  * @brief  Clear the RTC Wake Up timer's pending flags.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @param  __FLAG__ specifies the RTC WakeUpTimer Flag to clear.

-  *         This parameter can be:

-  *            @arg RTC_FLAG_WUTF

-  * @retval None

-  */

-#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))

-

-/* WAKE-UP TIMER EXTI */

-/* ------------------ */

-/**

-  * @brief  Enable interrupt on the RTC WakeUp Timer associated Exti line.

-  * @retval None

-  */

-#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT()       (EXTI->IMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)

-

-/**

-  * @brief  Disable interrupt on the RTC WakeUp Timer associated Exti line.

-  * @retval None

-  */

-#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT()      (EXTI->IMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))

-

-/**

-  * @brief  Enable event on the RTC WakeUp Timer associated Exti line.

-  * @retval None.

-  */

-#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT()    (EXTI->EMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)

-

-/**

-  * @brief  Disable event on the RTC WakeUp Timer associated Exti line.

-  * @retval None.

-  */

-#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT()   (EXTI->EMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))

-

-/**

-  * @brief  Enable falling edge trigger on the RTC WakeUp Timer associated Exti line.

-  * @retval None.

-  */

-#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE()   (EXTI->FTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)

-

-/**

-  * @brief  Disable falling edge trigger on the RTC WakeUp Timer associated Exti line.

-  * @retval None.

-  */

-#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE()  (EXTI->FTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))

-

-/**

-  * @brief  Enable rising edge trigger on the RTC WakeUp Timer associated Exti line.

-  * @retval None.

-  */

-#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE()    (EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)

-

-/**

-  * @brief  Disable rising edge trigger on the RTC WakeUp Timer associated Exti line.

-  * @retval None.

-  */

-#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE()   (EXTI->RTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))

-

-/**

-  * @brief  Enable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line.

-  * @retval None.

-  */

-#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE();

-

-/**

-  * @brief  Disable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line.

-  * This parameter can be:

-  * @retval None.

-  */

-#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE();

-

-/**

-  * @brief Check whether the RTC WakeUp Timer associated Exti line interrupt flag is set or not.

-  * @retval Line Status.

-  */

-#define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG()              (EXTI->PR & RTC_EXTI_LINE_WAKEUPTIMER_EVENT)

-

-/**

-  * @brief Clear the RTC WakeUp Timer associated Exti line flag.

-  * @retval None.

-  */

-#define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG()            (EXTI->PR = RTC_EXTI_LINE_WAKEUPTIMER_EVENT)

-

-/**

-  * @brief Generate a Software interrupt on the RTC WakeUp Timer associated Exti line.

-  * @retval None.

-  */

-#define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT()         (EXTI->SWIER |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)

-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */

-/**

-  * @}

-  */

-

-/* ---------------------------------TIMESTAMP---------------------------------*/

-/** @defgroup RTCEx_Timestamp RTC Timestamp

-  * @{

-  */

-/**

-  * @brief  Enable the RTC TimeStamp peripheral.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @retval None

-  */

-#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__)                        ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))

-

-/**

-  * @brief  Disable the RTC TimeStamp peripheral.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @retval None

-  */

-#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__)                       ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))

-

-/**

-  * @brief  Enable the RTC TimeStamp interrupt.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @param  __INTERRUPT__ specifies the RTC TimeStamp interrupt source to be enabled.

-  *         This parameter can be:

-  *            @arg RTC_IT_TS: TimeStamp interrupt

-  * @retval None

-  */

-#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__)      ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))

-

-/**

-  * @brief  Disable the RTC TimeStamp interrupt.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @param  __INTERRUPT__ specifies the RTC TimeStamp interrupt source to be disabled.

-  *         This parameter can be:

-  *            @arg RTC_IT_TS: TimeStamp interrupt

-  * @retval None

-  */

-#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__)     ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))

-

-/**

-  * @brief  Check whether the specified RTC TimeStamp interrupt has occurred or not.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @param  __INTERRUPT__ specifies the RTC TimeStamp interrupt to check.

-  *         This parameter can be:

-  *            @arg RTC_IT_TS: TimeStamp interrupt

-  * @retval None

-  */

-#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__)         (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)

-

-/**

-  * @brief  Check whether the specified RTC Time Stamp interrupt has been enabled or not.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @param  __INTERRUPT__ specifies the RTC Time Stamp interrupt source to check.

-  *         This parameter can be:

-  *            @arg RTC_IT_TS: TimeStamp interrupt

-  * @retval None

-  */

-#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)     (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)

-

-/**

-  * @brief  Get the selected RTC TimeStamp's flag status.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @param  __FLAG__ specifies the RTC TimeStamp Flag is pending or not.

-  *         This parameter can be:

-  *            @arg RTC_FLAG_TSF

-  *            @arg RTC_FLAG_TSOVF

-  * @retval None

-  */

-#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__)            (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)

-

-/**

-  * @brief  Clear the RTC Time Stamp's pending flags.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @param  __FLAG__ specifies the RTC Alarm Flag to clear.

-  *          This parameter can be:

-  *             @arg RTC_FLAG_TSF

-  * @retval None

-  */

-#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__)          ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))

-

-/**

-  * @}

-  */

-

-/* ---------------------------------TAMPER------------------------------------*/

-/** @defgroup RTCEx_Tamper RTC Tamper

-  * @{

-  */

-

-/**

-  * @brief  Enable the RTC Tamper1 input detection.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @retval None

-  */

-#define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__)                         ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP1E))

-

-/**

-  * @brief  Disable the RTC Tamper1 input detection.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @retval None

-  */

-#define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__)                        ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP1E))

-

-/**

-  * @brief  Enable the RTC Tamper2 input detection.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @retval None

-  */

-#define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__)                         ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP2E))

-

-/**

-  * @brief  Disable the RTC Tamper2 input detection.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @retval None

-  */

-#define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__)                        ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP2E))

-

-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)

-/**

-  * @brief  Enable the RTC Tamper3 input detection.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @retval None

-  */

-#define __HAL_RTC_TAMPER3_ENABLE(__HANDLE__)                         ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP3E))

-

-/**

-  * @brief  Disable the RTC Tamper3 input detection.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @retval None

-  */

-#define __HAL_RTC_TAMPER3_DISABLE(__HANDLE__)                        ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP3E))

-

-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */

-/**

-  * @brief  Enable the RTC Tamper interrupt.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @param  __INTERRUPT__ specifies the RTC Tamper interrupt sources to be enabled.

-  *          This parameter can be any combination of the following values:

-  *            @arg RTC_IT_TAMP: Tamper interrupt

-  * @retval None

-  */

-#define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__)        ((__HANDLE__)->Instance->TAFCR |= (__INTERRUPT__))

-

-/**

-  * @brief  Disable the RTC Tamper interrupt.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @param  __INTERRUPT__ specifies the RTC Tamper interrupt sources to be disabled.

-  *         This parameter can be any combination of the following values:

-  *            @arg RTC_IT_TAMP: Tamper interrupt

-  * @retval None

-  */

-#define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__)       ((__HANDLE__)->Instance->TAFCR &= ~(__INTERRUPT__))

-

-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)

-/**

-  * @brief  Check whether the specified RTC Tamper interrupt has occurred or not.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @param  __INTERRUPT__ specifies the RTC Tamper interrupt to check.

-  *         This parameter can be:

-  *            @arg  RTC_IT_TAMP1: Tamper1 interrupt

-  *            @arg  RTC_IT_TAMP2: Tamper2 interrupt

-  *            @arg  RTC_IT_TAMP3: Tamper3 interrupt

-  * @retval None

-  */

-#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__)       (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)

-#else

-

-/**

-  * @brief  Check whether the specified RTC Tamper interrupt has occurred or not.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @param  __INTERRUPT__ specifies the RTC Tamper interrupt to check.

-  *         This parameter can be:

-  *            @arg  RTC_IT_TAMP1: Tamper1 interrupt

-  *            @arg  RTC_IT_TAMP2: Tamper2 interrupt

-  * @retval None

-  */

-#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__)       (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)

-

-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */

-

-/**

-  * @brief  Check whether the specified RTC Tamper interrupt has been enabled or not.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @param  __INTERRUPT__ specifies the RTC Tamper interrupt source to check.

-  *         This parameter can be:

-  *            @arg RTC_IT_TAMP: Tamper interrupt

-  * @retval None

-  */

-#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)     (((((__HANDLE__)->Instance->TAFCR) & (__INTERRUPT__)) != RESET) ? SET : RESET)

-

-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)

-/**

-  * @brief  Get the selected RTC Tamper's flag status.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @param  __FLAG__ specifies the RTC Tamper Flag is pending or not.

-  *          This parameter can be:

-  *             @arg RTC_FLAG_TAMP1F

-  *             @arg RTC_FLAG_TAMP2F

-  *             @arg RTC_FLAG_TAMP3F

-  * @retval None

-  */

-#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__)               (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)

-

-

-/**

-  * @brief  Clear the RTC Tamper's pending flags.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @param  __FLAG__ specifies the RTC Tamper Flag to clear.

-  *          This parameter can be:

-  *             @arg RTC_FLAG_TAMP1F

-  *             @arg RTC_FLAG_TAMP2F

-  *             @arg RTC_FLAG_TAMP3F

-  * @retval None

-  */

-#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__)      ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))

-

-#else

-

-/**

-  * @brief  Get the selected RTC Tamper's flag status.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @param  __FLAG__ specifies the RTC Tamper Flag is pending or not.

-  *          This parameter can be:

-  *             @arg RTC_FLAG_TAMP1F

-  *             @arg RTC_FLAG_TAMP2F

-  * @retval None

-  */

-#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__)               (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)

-

-

-/**

-  * @brief  Clear the RTC Tamper's pending flags.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @param  __FLAG__ specifies the RTC Tamper Flag to clear.

-  *          This parameter can be:

-  *             @arg RTC_FLAG_TAMP1F

-  *             @arg RTC_FLAG_TAMP2F

-  * @retval None

-  */

-#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__)      ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))

-

-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */

-/**

-  * @}

-  */

-

-/* --------------------------TAMPER/TIMESTAMP---------------------------------*/

-/** @defgroup RTCEx_Tamper_Timestamp EXTI RTC Tamper Timestamp EXTI

-  * @{

-  */

-

-/* TAMPER TIMESTAMP EXTI */

-/* --------------------- */

-/**

-  * @brief  Enable interrupt on the RTC Tamper and Timestamp associated Exti line.

-  * @retval None

-  */

-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT()        (EXTI->IMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)

-

-/**

-  * @brief  Disable interrupt on the RTC Tamper and Timestamp associated Exti line.

-  * @retval None

-  */

-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT()       (EXTI->IMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))

-

-/**

-  * @brief  Enable event on the RTC Tamper and Timestamp associated Exti line.

-  * @retval None.

-  */

-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT()    (EXTI->EMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)

-

-/**

-  * @brief  Disable event on the RTC Tamper and Timestamp associated Exti line.

-  * @retval None.

-  */

-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT()   (EXTI->EMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))

-

-/**

-  * @brief  Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.

-  * @retval None.

-  */

-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE()   (EXTI->FTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)

-

-/**

-  * @brief  Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.

-  * @retval None.

-  */

-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE()  (EXTI->FTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))

-

-/**

-  * @brief  Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.

-  * @retval None.

-  */

-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE()    (EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)

-

-/**

-  * @brief  Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.

-  * @retval None.

-  */

-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE()   (EXTI->RTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))

-

-/**

-  * @brief  Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.

-  * @retval None.

-  */

-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE();

-

-/**

-  * @brief  Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.

-  * This parameter can be:

-  * @retval None.

-  */

-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE();

-

-/**

-  * @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not.

-  * @retval Line Status.

-  */

-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG()         (EXTI->PR & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)

-

-/**

-  * @brief Clear the RTC Tamper and Timestamp associated Exti line flag.

-  * @retval None.

-  */

-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG()       (EXTI->PR = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)

-

-/**

-  * @brief Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line

-  * @retval None.

-  */

-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT()    (EXTI->SWIER |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)

-/**

-  * @}

-  */

-

-/* ------------------------------Calibration----------------------------------*/

-/** @defgroup RTCEx_Calibration RTC Calibration

-  * @{

-  */

-

-/**

-  * @brief  Enable the RTC calibration output.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @retval None

-  */

-#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__)                 ((__HANDLE__)->Instance->CR |= (RTC_CR_COE))

-

-/**

-  * @brief  Disable the calibration output.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @retval None

-  */

-#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__)                ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))

-

-/**

-  * @brief  Enable the clock reference detection.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @retval None

-  */

-#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__)                 ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))

-

-/**

-  * @brief  Disable the clock reference detection.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @retval None

-  */

-#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__)                ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))

-

-/**

-  * @brief  Get the selected RTC shift operation's flag status.

-  * @param  __HANDLE__ specifies the RTC handle.

-  * @param  __FLAG__ specifies the RTC shift operation Flag is pending or not.

-  *          This parameter can be:

-  *             @arg RTC_FLAG_SHPF

-  * @retval None

-  */

-#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__)                (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-/* Exported functions --------------------------------------------------------*/

-/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions

-  * @{

-  */

-

-/* RTC TimeStamp and Tamper functions *****************************************/

-/** @defgroup RTCEx_Exported_Functions_Group1 Extended RTC TimeStamp and Tamper functions

- * @{

- */

-

-HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);

-HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);

-HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc);

-HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format);

-

-HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper);

-HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper);

-HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);

-void              HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc);

-

-void              HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);

-void              HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);

-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)

-void              HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc);

-#endif

-void              HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);

-HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);

-HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);

-HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);

-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)

-HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);

-#endif

-/**

-  * @}

-  */

-

-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)

-/* RTC Wake-up functions ******************************************************/

-/** @defgroup RTCEx_Exported_Functions_Group2 Extended RTC Wake-up functions

- * @{

- */

-

-HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);

-HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);

-uint32_t          HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc);

-uint32_t          HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc);

-void              HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc);

-void              HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc);

-HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);

-#endif

-/**

-  * @}

-  */

-

-/* Extended Control functions ************************************************/

-/** @defgroup RTCEx_Exported_Functions_Group3 Extended Peripheral Control functions

- * @{

- */

-

-#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB)

-void              HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);

-uint32_t          HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);

-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB) */

-

-HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue);

-HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS);

-HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput);

-HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc);

-HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc);

-HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc);

-HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc);

-HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc);

-/**

-  * @}

-  */

-

-/* Extended RTC features functions *******************************************/

-

-/**

-  * @}

-  */

-

-/* Private types -------------------------------------------------------------*/

-/* Private variables ---------------------------------------------------------*/

-/* Private constants ---------------------------------------------------------*/

-/** @defgroup RTCEx_Private_Constants RTCEx Private Constants

-  * @{

-  */

-#define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT  ((uint32_t)EXTI_IMR_MR19)  /*!< External interrupt line 19 Connected to the RTC Tamper and Time Stamp events */

-#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT       ((uint32_t)EXTI_IMR_MR20)  /*!< External interrupt line 20 Connected to the RTC Wakeup event */

-/**

-  * @}

-  */

-

-/* Private macros ------------------------------------------------------------*/

-/** @defgroup RTCEx_Private_Macros RTCEx Private Macros

-  * @{

-  */

-

-/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters

-  * @{

-  */

-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)

-#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \

-                               ((OUTPUT) == RTC_OUTPUT_ALARMA)  || \

-                               ((OUTPUT) == RTC_OUTPUT_WAKEUP))

-#else

-#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \

-                               ((OUTPUT) == RTC_OUTPUT_ALARMA))

-#endif

-

-#define IS_RTC_BKP(BKP)                   ((BKP) < (uint32_t) RTC_BKP_NUMBER)

-

-#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \

-                                 ((EDGE) == RTC_TIMESTAMPEDGE_FALLING))

-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)

-#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & (uint32_t)0xFFFFFFD6U) == 0x00U) && ((TAMPER) != (uint32_t)RESET))

-

-#else

-#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & (uint32_t)0xFFFFFFF6U) == 0x00U) && ((TAMPER) != (uint32_t)RESET))

-

-#endif

-

-#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_DEFAULT))

-

-

-#define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \

-                                        ((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \

-                                        ((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) || \

-                                        ((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL))

-#define IS_RTC_TAMPER_FILTER(FILTER)  (((FILTER) == RTC_TAMPERFILTER_DISABLE) || \

-                                       ((FILTER) == RTC_TAMPERFILTER_2SAMPLE) || \

-                                       ((FILTER) == RTC_TAMPERFILTER_4SAMPLE) || \

-                                       ((FILTER) == RTC_TAMPERFILTER_8SAMPLE))

-#define IS_RTC_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \

-                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \

-                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \

-                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \

-                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \

-                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \

-                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512)  || \

-                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256))

-#define IS_RTC_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \

-                                                    ((DURATION) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \

-                                                    ((DURATION) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \

-                                                    ((DURATION) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK))

-#define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \

-                                                              ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE))

-#define IS_RTC_TAMPER_PULLUP_STATE(STATE) (((STATE) == RTC_TAMPER_PULLUP_ENABLE) || \

-                                           ((STATE) == RTC_TAMPER_PULLUP_DISABLE))

-#define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16)   || \

-                                    ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8)    || \

-                                    ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4)    || \

-                                    ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2)    || \

-                                    ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \

-                                    ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS))

-

-#define IS_RTC_WAKEUP_COUNTER(COUNTER)  ((COUNTER) <= 0xFFFFU)

-

-

-#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \

-                                            ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \

-                                            ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC))

-#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \

-                                        ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET))

-

-

-#define  IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FFU)

-#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \

-                                 ((SEL) == RTC_SHIFTADD1S_SET))

-#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFFU)

-#define IS_RTC_CALIB_OUTPUT(OUTPUT)  (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \

-                                      ((OUTPUT) == RTC_CALIBOUTPUT_1HZ))

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-#ifdef __cplusplus

-}

-#endif

-

-#endif /* __STM32F0xx_HAL_RTC_EX_H */

-

-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

-