summaryrefslogtreecommitdiff
path: root/fw/cdc-dials/Src
diff options
context:
space:
mode:
Diffstat (limited to 'fw/cdc-dials/Src')
-rw-r--r--fw/cdc-dials/Src/main.c175
-rw-r--r--fw/cdc-dials/Src/stm32f0xx_hal_msp.c191
-rw-r--r--fw/cdc-dials/Src/stm32f0xx_it.c167
-rw-r--r--fw/cdc-dials/Src/system_stm32f0xx.c265
-rw-r--r--fw/cdc-dials/Src/usbd_cdc_interface.c46
-rw-r--r--fw/cdc-dials/Src/usbd_conf.c464
-rw-r--r--fw/cdc-dials/Src/usbd_desc.c265
7 files changed, 0 insertions, 1573 deletions
diff --git a/fw/cdc-dials/Src/main.c b/fw/cdc-dials/Src/main.c
deleted file mode 100644
index e1fbcc4..0000000
--- a/fw/cdc-dials/Src/main.c
+++ /dev/null
@@ -1,175 +0,0 @@
-
-#include "main.h"
-
-//#define APP_TX_DATA_SIZE 64
-
-ADC_HandleTypeDef hadc;
-DMA_HandleTypeDef hdma_adc;
-
-PCD_HandleTypeDef hpcd_USB_FS;
-PCD_HandleTypeDef USBD_Device;
-
-void SystemClock_Config(void);
-static void MX_GPIO_Init(void);
-static void MX_DMA_Init(void);
-static void MX_ADC_Init(void);
-static void MX_USB_PCD_Init(void);
-
-uint16_t ADCval[8];
-
-extern uint8_t UserTxBuffer[APP_TX_DATA_SIZE];
-
-int main(void)
-{
- HAL_Init();
-
- SystemClock_Config();
-
- MX_GPIO_Init();
- MX_DMA_Init();
- MX_ADC_Init();
-
- HAL_ADC_Start_DMA(&hadc, ADCval, 8);
-
- USBD_Init(&USBD_Device, &VCP_Desc, 0);
- USBD_RegisterClass(&USBD_Device, &USBD_CDC);
- USBD_CDC_RegisterInterface(&USBD_Device, &USBD_CDC_fops);
- USBD_Start(&USBD_Device);
-
- while (1)
- {
- HAL_GPIO_WritePin(GPIOB,GPIO_PIN_13,1);
- HAL_Delay(50);
- HAL_GPIO_WritePin(GPIOB,GPIO_PIN_13,0);
- HAL_Delay(50);
- memset(UserTxBuffer, 0, APP_TX_DATA_SIZE);
- sprintf(UserTxBuffer, "%d \t %d \t %d \t %d \t %d \t %d \t %d \t %d \r\n", ADCval[0], ADCval[1], ADCval[2], ADCval[3], ADCval[4], ADCval[5], ADCval[6], ADCval[7]);
- USBD_CDC_SetTxBuffer(&USBD_Device, (uint8_t*)&UserTxBuffer[0], APP_TX_DATA_SIZE);
- USBD_CDC_TransmitPacket(&USBD_Device);
- }
-}
-
-void SystemClock_Config(void)
-{
- RCC_OscInitTypeDef RCC_OscInitStruct = {0};
- RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
- RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
-
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI14|RCC_OSCILLATORTYPE_HSI48;
- RCC_OscInitStruct.HSI48State = RCC_HSI48_ON;
- RCC_OscInitStruct.HSI14State = RCC_HSI14_ON;
- RCC_OscInitStruct.HSI14CalibrationValue = 16;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
- HAL_RCC_OscConfig(&RCC_OscInitStruct);
-
- RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
- |RCC_CLOCKTYPE_PCLK1;
- RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI48;
- RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
- RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
- HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1);
-
- PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB;
- PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_HSI48;
- HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit);
-
-}
-
-static void MX_ADC_Init(void)
-{
-
- ADC_ChannelConfTypeDef sConfig = {0};
-
- hadc.Instance = ADC1;
- hadc.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV1;
- hadc.Init.Resolution = ADC_RESOLUTION_12B;
- hadc.Init.DataAlign = ADC_DATAALIGN_RIGHT;
- hadc.Init.ScanConvMode = ADC_SCAN_DIRECTION_FORWARD;
- hadc.Init.EOCSelection = ADC_EOC_SEQ_CONV;
- hadc.Init.LowPowerAutoWait = DISABLE;
- hadc.Init.LowPowerAutoPowerOff = DISABLE;
- hadc.Init.ContinuousConvMode = ENABLE;
- hadc.Init.DiscontinuousConvMode = DISABLE;
- hadc.Init.ExternalTrigConv = ADC_SOFTWARE_START;
- hadc.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
- hadc.Init.DMAContinuousRequests = ENABLE;
- hadc.Init.Overrun = ADC_OVR_DATA_PRESERVED;
- HAL_ADC_Init(&hadc);
-
- sConfig.Rank = ADC_RANK_CHANNEL_NUMBER;
- sConfig.SamplingTime = ADC_SAMPLETIME_239CYCLES_5;
- sConfig.Channel = ADC_CHANNEL_1;
- HAL_ADC_ConfigChannel(&hadc, &sConfig);
-
- sConfig.Channel = ADC_CHANNEL_2;
- HAL_ADC_ConfigChannel(&hadc, &sConfig);
-
- sConfig.Channel = ADC_CHANNEL_3;
- HAL_ADC_ConfigChannel(&hadc, &sConfig);
-
- sConfig.Channel = ADC_CHANNEL_4;
- HAL_ADC_ConfigChannel(&hadc, &sConfig);
-
- sConfig.Channel = ADC_CHANNEL_5;
- HAL_ADC_ConfigChannel(&hadc, &sConfig);
-
- sConfig.Channel = ADC_CHANNEL_6;
- HAL_ADC_ConfigChannel(&hadc, &sConfig);
-
- sConfig.Channel = ADC_CHANNEL_7;
- HAL_ADC_ConfigChannel(&hadc, &sConfig);
-
- sConfig.Channel = ADC_CHANNEL_8;
- HAL_ADC_ConfigChannel(&hadc, &sConfig);
-}
-
-
-static void MX_USB_PCD_Init(void)
-{
-
- hpcd_USB_FS.Instance = USB;
- hpcd_USB_FS.Init.dev_endpoints = 8;
- hpcd_USB_FS.Init.speed = PCD_SPEED_FULL;
- hpcd_USB_FS.Init.phy_itface = PCD_PHY_EMBEDDED;
- hpcd_USB_FS.Init.low_power_enable = DISABLE;
- hpcd_USB_FS.Init.lpm_enable = DISABLE;
- hpcd_USB_FS.Init.battery_charging_enable = DISABLE;
- HAL_PCD_Init(&hpcd_USB_FS);
-}
-
-
-static void MX_DMA_Init(void)
-{
- __HAL_RCC_DMA1_CLK_ENABLE();
-
- HAL_NVIC_SetPriority(DMA1_Channel1_IRQn, 0, 0);
- HAL_NVIC_EnableIRQ(DMA1_Channel1_IRQn);
-}
-
-
-static void MX_GPIO_Init(void)
-{
-
- GPIO_InitTypeDef GPIO_InitStruct = {0};
-
- __HAL_RCC_GPIOB_CLK_ENABLE();
- __HAL_RCC_GPIOA_CLK_ENABLE();
-
- HAL_GPIO_WritePin(GPIOB, GPIO_PIN_13, GPIO_PIN_RESET);
-
- GPIO_InitStruct.Pin = GPIO_PIN_13;
- GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
- HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-}
-
-void Error_Handler(void)
-{
- while(1){
- HAL_GPIO_WritePin(GPIOB,GPIO_PIN_13,1);
- HAL_Delay(100);
- HAL_GPIO_WritePin(GPIOB,GPIO_PIN_13,0);
- HAL_Delay(100);
- }
-}
diff --git a/fw/cdc-dials/Src/stm32f0xx_hal_msp.c b/fw/cdc-dials/Src/stm32f0xx_hal_msp.c
deleted file mode 100644
index 8695580..0000000
--- a/fw/cdc-dials/Src/stm32f0xx_hal_msp.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
- ******************************************************************************
- * File Name : stm32f0xx_hal_msp.c
- * Description : This file provides code for the MSP Initialization
- * and de-Initialization codes.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-/* USER CODE END Header */
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-extern DMA_HandleTypeDef hdma_adc;
-
-/* Private typedef -----------------------------------------------------------*/
-/* USER CODE BEGIN TD */
-
-/* USER CODE END TD */
-
-/* Private define ------------------------------------------------------------*/
-/* USER CODE BEGIN Define */
-
-/* USER CODE END Define */
-
-/* Private macro -------------------------------------------------------------*/
-/* USER CODE BEGIN Macro */
-
-/* USER CODE END Macro */
-
-/* Private variables ---------------------------------------------------------*/
-/* USER CODE BEGIN PV */
-
-/* USER CODE END PV */
-
-/* Private function prototypes -----------------------------------------------*/
-/* USER CODE BEGIN PFP */
-
-/* USER CODE END PFP */
-
-/* External functions --------------------------------------------------------*/
-/* USER CODE BEGIN ExternalFunctions */
-
-/* USER CODE END ExternalFunctions */
-
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-/**
- * Initializes the Global MSP.
- */
-void HAL_MspInit(void)
-{
- /* USER CODE BEGIN MspInit 0 */
-
- /* USER CODE END MspInit 0 */
-
- __HAL_RCC_SYSCFG_CLK_ENABLE();
- __HAL_RCC_PWR_CLK_ENABLE();
-
- /* System interrupt init*/
-
- /* USER CODE BEGIN MspInit 1 */
-
- /* USER CODE END MspInit 1 */
-}
-
-/**
-* @brief ADC MSP Initialization
-* This function configures the hardware resources used in this example
-* @param hadc: ADC handle pointer
-* @retval None
-*/
-void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
-{
- GPIO_InitTypeDef GPIO_InitStruct = {0};
- if(hadc->Instance==ADC1)
- {
- /* USER CODE BEGIN ADC1_MspInit 0 */
-
- /* USER CODE END ADC1_MspInit 0 */
- /* Peripheral clock enable */
- __HAL_RCC_ADC1_CLK_ENABLE();
-
- __HAL_RCC_GPIOA_CLK_ENABLE();
- __HAL_RCC_GPIOB_CLK_ENABLE();
- /**ADC GPIO Configuration
- PA0 ------> ADC_IN0
- PA1 ------> ADC_IN1
- PA2 ------> ADC_IN2
- PA3 ------> ADC_IN3
- PA4 ------> ADC_IN4
- PA5 ------> ADC_IN5
- PA6 ------> ADC_IN6
- PA7 ------> ADC_IN7
- PB0 ------> ADC_IN8
- */
- GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
- |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7;
- GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-
- GPIO_InitStruct.Pin = GPIO_PIN_0;
- GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
- /* ADC1 DMA Init */
- /* ADC Init */
- hdma_adc.Instance = DMA1_Channel1;
- hdma_adc.Init.Direction = DMA_PERIPH_TO_MEMORY;
- hdma_adc.Init.PeriphInc = DMA_PINC_DISABLE;
- hdma_adc.Init.MemInc = DMA_MINC_ENABLE;
- hdma_adc.Init.PeriphDataAlignment = DMA_PDATAALIGN_HALFWORD;
- hdma_adc.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD;
- hdma_adc.Init.Mode = DMA_CIRCULAR;
- hdma_adc.Init.Priority = DMA_PRIORITY_MEDIUM;
- if (HAL_DMA_Init(&hdma_adc) != HAL_OK)
- {
- Error_Handler();
- }
-
- __HAL_LINKDMA(hadc,DMA_Handle,hdma_adc);
-
- /* USER CODE BEGIN ADC1_MspInit 1 */
-
- /* USER CODE END ADC1_MspInit 1 */
- }
-
-}
-
-/**
-* @brief ADC MSP De-Initialization
-* This function freeze the hardware resources used in this example
-* @param hadc: ADC handle pointer
-* @retval None
-*/
-void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
-{
- if(hadc->Instance==ADC1)
- {
- /* USER CODE BEGIN ADC1_MspDeInit 0 */
-
- /* USER CODE END ADC1_MspDeInit 0 */
- /* Peripheral clock disable */
- __HAL_RCC_ADC1_CLK_DISABLE();
-
- /**ADC GPIO Configuration
- PA0 ------> ADC_IN0
- PA1 ------> ADC_IN1
- PA2 ------> ADC_IN2
- PA3 ------> ADC_IN3
- PA4 ------> ADC_IN4
- PA5 ------> ADC_IN5
- PA6 ------> ADC_IN6
- PA7 ------> ADC_IN7
- PB0 ------> ADC_IN8
- */
- HAL_GPIO_DeInit(GPIOA, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
- |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7);
-
- HAL_GPIO_DeInit(GPIOB, GPIO_PIN_0);
-
- /* ADC1 DMA DeInit */
- HAL_DMA_DeInit(hadc->DMA_Handle);
- /* USER CODE BEGIN ADC1_MspDeInit 1 */
-
- /* USER CODE END ADC1_MspDeInit 1 */
- }
-
-}
-
-/* USER CODE BEGIN 1 */
-
-/* USER CODE END 1 */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/fw/cdc-dials/Src/stm32f0xx_it.c b/fw/cdc-dials/Src/stm32f0xx_it.c
deleted file mode 100644
index 37cbede..0000000
--- a/fw/cdc-dials/Src/stm32f0xx_it.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
- ******************************************************************************
- * @file stm32f0xx_it.c
- * @brief Interrupt Service Routines.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-/* USER CODE END Header */
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-#include "stm32f0xx_it.h"
-/* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
-/* USER CODE END Includes */
-extern PCD_HandleTypeDef hpcd;
-
-/* Private typedef -----------------------------------------------------------*/
-/* USER CODE BEGIN TD */
-
-/* USER CODE END TD */
-
-/* Private define ------------------------------------------------------------*/
-/* USER CODE BEGIN PD */
-
-/* USER CODE END PD */
-
-/* Private macro -------------------------------------------------------------*/
-/* USER CODE BEGIN PM */
-
-/* USER CODE END PM */
-
-/* Private variables ---------------------------------------------------------*/
-/* USER CODE BEGIN PV */
-
-/* USER CODE END PV */
-
-/* Private function prototypes -----------------------------------------------*/
-/* USER CODE BEGIN PFP */
-
-/* USER CODE END PFP */
-
-/* Private user code ---------------------------------------------------------*/
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-/* External variables --------------------------------------------------------*/
-extern DMA_HandleTypeDef hdma_adc;
-/* USER CODE BEGIN EV */
-
-/* USER CODE END EV */
-
-/******************************************************************************/
-/* Cortex-M0 Processor Interruption and Exception Handlers */
-/******************************************************************************/
-/**
- * @brief This function handles Non maskable interrupt.
- */
-void NMI_Handler(void)
-{
- /* USER CODE BEGIN NonMaskableInt_IRQn 0 */
-
- /* USER CODE END NonMaskableInt_IRQn 0 */
- /* USER CODE BEGIN NonMaskableInt_IRQn 1 */
-
- /* USER CODE END NonMaskableInt_IRQn 1 */
-}
-
-/**
- * @brief This function handles Hard fault interrupt.
- */
-void HardFault_Handler(void)
-{
- /* USER CODE BEGIN HardFault_IRQn 0 */
-
- /* USER CODE END HardFault_IRQn 0 */
- while (1)
- {
- HAL_GPIO_WritePin(GPIOB,GPIO_PIN_13,1);
- HAL_Delay(100);
- HAL_GPIO_WritePin(GPIOB,GPIO_PIN_13,0);
- HAL_Delay(100);
- }
-}
-
-/**
- * @brief This function handles System service call via SWI instruction.
- */
-void SVC_Handler(void)
-{
- /* USER CODE BEGIN SVC_IRQn 0 */
-
- /* USER CODE END SVC_IRQn 0 */
- /* USER CODE BEGIN SVC_IRQn 1 */
-
- /* USER CODE END SVC_IRQn 1 */
-}
-
-/**
- * @brief This function handles Pendable request for system service.
- */
-void PendSV_Handler(void)
-{
- /* USER CODE BEGIN PendSV_IRQn 0 */
-
- /* USER CODE END PendSV_IRQn 0 */
- /* USER CODE BEGIN PendSV_IRQn 1 */
-
- /* USER CODE END PendSV_IRQn 1 */
-}
-
-/**
- * @brief This function handles System tick timer.
- */
-void SysTick_Handler(void)
-{
- /* USER CODE BEGIN SysTick_IRQn 0 */
-
- /* USER CODE END SysTick_IRQn 0 */
- HAL_IncTick();
- /* USER CODE BEGIN SysTick_IRQn 1 */
-
- /* USER CODE END SysTick_IRQn 1 */
-}
-
-/******************************************************************************/
-/* STM32F0xx Peripheral Interrupt Handlers */
-/* Add here the Interrupt Handlers for the used peripherals. */
-/* For the available peripheral interrupt handler names, */
-/* please refer to the startup file (startup_stm32f0xx.s). */
-/******************************************************************************/
-
-/**
- * @brief This function handles DMA1 channel 1 global interrupt.
- */
-void DMA1_Channel1_IRQHandler(void)
-{
- /* USER CODE BEGIN DMA1_Channel1_IRQn 0 */
-
- /* USER CODE END DMA1_Channel1_IRQn 0 */
- HAL_DMA_IRQHandler(&hdma_adc);
- /* USER CODE BEGIN DMA1_Channel1_IRQn 1 */
-
- /* USER CODE END DMA1_Channel1_IRQn 1 */
-}
-
-/* USER CODE BEGIN 1 */
-void USB_IRQHandler(void)
-{
- HAL_PCD_IRQHandler(&hpcd);
-}
-
-
-/* USER CODE END 1 */
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/fw/cdc-dials/Src/system_stm32f0xx.c b/fw/cdc-dials/Src/system_stm32f0xx.c
deleted file mode 100644
index 6a3202b..0000000
--- a/fw/cdc-dials/Src/system_stm32f0xx.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/**
- ******************************************************************************
- * @file system_stm32f0xx.c
- * @author MCD Application Team
- * @brief CMSIS Cortex-M0 Device Peripheral Access Layer System Source File.
- *
- * 1. This file provides two functions and one global variable to be called from
- * user application:
- * - SystemInit(): This function is called at startup just after reset and
- * before branch to main program. This call is made inside
- * the "startup_stm32f0xx.s" file.
- *
- * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
- * by the user application to setup the SysTick
- * timer or configure other parameters.
- *
- * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
- * be called whenever the core clock is changed
- * during program execution.
- *
- * 2. After each device reset the HSI (8 MHz) is used as system clock source.
- * Then SystemInit() function is called, in "startup_stm32f0xx.s" file, to
- * configure the system clock before to branch to main program.
- *
- * 3. This file configures the system clock as follows:
- *=============================================================================
- * Supported STM32F0xx device
- *-----------------------------------------------------------------------------
- * System Clock source | HSI
- *-----------------------------------------------------------------------------
- * SYSCLK(Hz) | 8000000
- *-----------------------------------------------------------------------------
- * HCLK(Hz) | 8000000
- *-----------------------------------------------------------------------------
- * AHB Prescaler | 1
- *-----------------------------------------------------------------------------
- * APB1 Prescaler | 1
- *-----------------------------------------------------------------------------
- *=============================================================================
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/** @addtogroup CMSIS
- * @{
- */
-
-/** @addtogroup stm32f0xx_system
- * @{
- */
-
-/** @addtogroup STM32F0xx_System_Private_Includes
- * @{
- */
-
-#include "stm32f0xx.h"
-
-/**
- * @}
- */
-
-/** @addtogroup STM32F0xx_System_Private_TypesDefinitions
- * @{
- */
-
-/**
- * @}
- */
-
-/** @addtogroup STM32F0xx_System_Private_Defines
- * @{
- */
-#if !defined (HSE_VALUE)
- #define HSE_VALUE ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz.
- This value can be provided and adapted by the user application. */
-#endif /* HSE_VALUE */
-
-#if !defined (HSI_VALUE)
- #define HSI_VALUE ((uint32_t)8000000) /*!< Default value of the Internal oscillator in Hz.
- This value can be provided and adapted by the user application. */
-#endif /* HSI_VALUE */
-
-#if !defined (HSI48_VALUE)
-#define HSI48_VALUE ((uint32_t)48000000) /*!< Default value of the HSI48 Internal oscillator in Hz.
- This value can be provided and adapted by the user application. */
-#endif /* HSI48_VALUE */
-/**
- * @}
- */
-
-/** @addtogroup STM32F0xx_System_Private_Macros
- * @{
- */
-
-/**
- * @}
- */
-
-/** @addtogroup STM32F0xx_System_Private_Variables
- * @{
- */
- /* This variable is updated in three ways:
- 1) by calling CMSIS function SystemCoreClockUpdate()
- 2) by calling HAL API function HAL_RCC_GetHCLKFreq()
- 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
- Note: If you use this function to configure the system clock there is no need to
- call the 2 first functions listed above, since SystemCoreClock variable is
- updated automatically.
- */
-uint32_t SystemCoreClock = 8000000;
-
-const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
-const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4};
-
-/**
- * @}
- */
-
-/** @addtogroup STM32F0xx_System_Private_FunctionPrototypes
- * @{
- */
-
-/**
- * @}
- */
-
-/** @addtogroup STM32F0xx_System_Private_Functions
- * @{
- */
-
-/**
- * @brief Setup the microcontroller system.
- * @param None
- * @retval None
- */
-void SystemInit(void)
-{
- /* NOTE :SystemInit(): This function is called at startup just after reset and
- before branch to main program. This call is made inside
- the "startup_stm32f0xx.s" file.
- User can setups the default system clock (System clock source, PLL Multiplier
- and Divider factors, AHB/APBx prescalers and Flash settings).
- */
-}
-
-/**
- * @brief Update SystemCoreClock variable according to Clock Register Values.
- * The SystemCoreClock variable contains the core clock (HCLK), it can
- * be used by the user application to setup the SysTick timer or configure
- * other parameters.
- *
- * @note Each time the core clock (HCLK) changes, this function must be called
- * to update SystemCoreClock variable value. Otherwise, any configuration
- * based on this variable will be incorrect.
- *
- * @note - The system frequency computed by this function is not the real
- * frequency in the chip. It is calculated based on the predefined
- * constant and the selected clock source:
- *
- * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
- *
- * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
- *
- * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
- * or HSI_VALUE(*) multiplied/divided by the PLL factors.
- *
- * (*) HSI_VALUE is a constant defined in stm32f0xx_hal.h file (default value
- * 8 MHz) but the real value may vary depending on the variations
- * in voltage and temperature.
- *
- * (**) HSE_VALUE is a constant defined in stm32f0xx_hal.h file (default value
- * 8 MHz), user has to ensure that HSE_VALUE is same as the real
- * frequency of the crystal used. Otherwise, this function may
- * have wrong result.
- *
- * - The result of this function could be not correct when using fractional
- * value for HSE crystal.
- *
- * @param None
- * @retval None
- */
-void SystemCoreClockUpdate (void)
-{
- uint32_t tmp = 0, pllmull = 0, pllsource = 0, predivfactor = 0;
-
- /* Get SYSCLK source -------------------------------------------------------*/
- tmp = RCC->CFGR & RCC_CFGR_SWS;
-
- switch (tmp)
- {
- case RCC_CFGR_SWS_HSI: /* HSI used as system clock */
- SystemCoreClock = HSI_VALUE;
- break;
- case RCC_CFGR_SWS_HSE: /* HSE used as system clock */
- SystemCoreClock = HSE_VALUE;
- break;
- case RCC_CFGR_SWS_PLL: /* PLL used as system clock */
- /* Get PLL clock source and multiplication factor ----------------------*/
- pllmull = RCC->CFGR & RCC_CFGR_PLLMUL;
- pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
- pllmull = ( pllmull >> 18) + 2;
- predivfactor = (RCC->CFGR2 & RCC_CFGR2_PREDIV) + 1;
-
- if (pllsource == RCC_CFGR_PLLSRC_HSE_PREDIV)
- {
- /* HSE used as PLL clock source : SystemCoreClock = HSE/PREDIV * PLLMUL */
- SystemCoreClock = (HSE_VALUE/predivfactor) * pllmull;
- }
-#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
- else if (pllsource == RCC_CFGR_PLLSRC_HSI48_PREDIV)
- {
- /* HSI48 used as PLL clock source : SystemCoreClock = HSI48/PREDIV * PLLMUL */
- SystemCoreClock = (HSI48_VALUE/predivfactor) * pllmull;
- }
-#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx */
- else
- {
-#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) \
- || defined(STM32F078xx) || defined(STM32F071xB) || defined(STM32F072xB) \
- || defined(STM32F070xB) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
- /* HSI used as PLL clock source : SystemCoreClock = HSI/PREDIV * PLLMUL */
- SystemCoreClock = (HSI_VALUE/predivfactor) * pllmull;
-#else
- /* HSI used as PLL clock source : SystemCoreClock = HSI/2 * PLLMUL */
- SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
-#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 ||
- STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB ||
- STM32F091xC || STM32F098xx || STM32F030xC */
- }
- break;
- default: /* HSI used as system clock */
- SystemCoreClock = HSI_VALUE;
- break;
- }
- /* Compute HCLK clock frequency ----------------*/
- /* Get HCLK prescaler */
- tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
- /* HCLK clock frequency */
- SystemCoreClock >>= tmp;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff --git a/fw/cdc-dials/Src/usbd_cdc_interface.c b/fw/cdc-dials/Src/usbd_cdc_interface.c
deleted file mode 100644
index 4413904..0000000
--- a/fw/cdc-dials/Src/usbd_cdc_interface.c
+++ /dev/null
@@ -1,46 +0,0 @@
-#include "main.h"
-
-USBD_CDC_LineCodingTypeDef LineCoding =
- {
- 115200, /* baud rate*/
- 0x00, /* stop bits-1*/
- 0x00, /* parity - none*/
- 0x08 /* nb. of bits 8*/
- };
-
-extern USBD_HandleTypeDef USBD_Device;
-
-static int8_t CDC_Itf_Init (void);
-static int8_t CDC_Itf_DeInit (void);
-static int8_t CDC_Itf_Control (uint8_t cmd, uint8_t* pbuf, uint16_t length);
-static int8_t CDC_Itf_Receive (uint8_t* pbuf, uint32_t *Len);
-
-static void ComPort_Config(void);
-
-USBD_CDC_ItfTypeDef USBD_CDC_fops =
-{
- CDC_Itf_Init,
- CDC_Itf_DeInit,
- CDC_Itf_Control,
- CDC_Itf_Receive
-};
-
-static int8_t CDC_Itf_Init(void)
-{
- USBD_CDC_SetTxBuffer(&USBD_Device, UserTxBuffer, 0);
- USBD_CDC_SetRxBuffer(&USBD_Device, UserRxBuffer);
-
- return (USBD_OK);
-}
-
-static int8_t CDC_Itf_DeInit (void){
-
-}
-
-static int8_t CDC_Itf_Control (uint8_t cmd, uint8_t* pbuf, uint16_t length){
-
-}
-
-static int8_t CDC_Itf_Receive (uint8_t* pbuf, uint32_t *Len){
-
-}
diff --git a/fw/cdc-dials/Src/usbd_conf.c b/fw/cdc-dials/Src/usbd_conf.c
deleted file mode 100644
index b3fb125..0000000
--- a/fw/cdc-dials/Src/usbd_conf.c
+++ /dev/null
@@ -1,464 +0,0 @@
-/**
- ******************************************************************************
- * @file USB_Device/CDC_Standalone/Src/usbd_conf.c
- * @author MCD Application Team
- * @brief This file implements the USB Device library callbacks and MSP
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics International N.V.
- * All rights reserved.</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted, provided that the following conditions are met:
- *
- * 1. Redistribution of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of other
- * contributors to this software may be used to endorse or promote products
- * derived from this software without specific written permission.
- * 4. This software, including modifications and/or derivative works of this
- * software, must execute solely and exclusively on microcontroller or
- * microprocessor devices manufactured by or for STMicroelectronics.
- * 5. Redistribution and use of this software other than as permitted under
- * this license is void and will automatically terminate your rights under
- * this license.
- *
- * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
- * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
- * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
- * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
- * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_hal.h"
-#include "usbd_core.h"
-#include "main.h"
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-PCD_HandleTypeDef hpcd;
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/*******************************************************************************
- PCD BSP Routines
-*******************************************************************************/
-
-/**
- * @brief Initializes the PCD MSP.
- * @param hpcd: PCD handle
- * @retval None
- */
-void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd)
-{
- GPIO_InitTypeDef GPIO_InitStruct;
-
- /* Enable the GPIOA clock */
- __HAL_RCC_GPIOA_CLK_ENABLE();
-
- /* Configure USB DM and DP pins.
- This is optional, and maintained only for user guidance. */
- GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12);
- GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
- GPIO_InitStruct.Alternate = GPIO_AF2_USB;
- HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-
- /* Enable USB FS Clock */
- __HAL_RCC_USB_CLK_ENABLE();
-
- /* Set USB FS Interrupt priority */
- HAL_NVIC_SetPriority(USB_IRQn, 3, 0);
-
- /* Enable USB FS Interrupt */
- HAL_NVIC_EnableIRQ(USB_IRQn);
-}
-
-/**
- * @brief De-Initializes the PCD MSP.
- * @param hpcd: PCD handle
- * @retval None
- */
-void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd)
-{
- /* Disable USB FS Clock */
- __HAL_RCC_USB_CLK_DISABLE();
-}
-
-/*******************************************************************************
- LL Driver Callbacks (PCD -> USB Device Library)
-*******************************************************************************/
-
-/**
- * @brief SOF callback.
- * @param hpcd: PCD handle
- * @retval None
- */
-void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd)
-{
- USBD_LL_SetupStage((USBD_HandleTypeDef*)hpcd->pData, (uint8_t *)hpcd->Setup);
-}
-
-/**
- * @brief SOF callback.
- * @param hpcd: PCD handle
- * @param epnum: Endpoint Number
- * @retval None
- */
-void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
-{
- USBD_LL_DataOutStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->OUT_ep[epnum].xfer_buff);
-}
-
-/**
- * @brief SOF callback.
- * @param hpcd: PCD handle
- * @param epnum: Endpoint Number
- * @retval None
- */
-void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
-{
- USBD_LL_DataInStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->IN_ep[epnum].xfer_buff);
-}
-
-/**
- * @brief SOF callback.
- * @param hpcd: PCD handle
- * @retval None
- */
-void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd)
-{
- USBD_LL_SOF((USBD_HandleTypeDef*)hpcd->pData);
-}
-
-/**
- * @brief SOF callback.
- * @param hpcd: PCD handle
- * @retval None
- */
-void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd)
-{
- USBD_LL_SetSpeed((USBD_HandleTypeDef*)hpcd->pData, USBD_SPEED_FULL);
- /* Reset Device */
- USBD_LL_Reset((USBD_HandleTypeDef*)hpcd->pData);
-}
-
-/**
- * @brief SOF callback.
- * @param hpcd: PCD handle
- * @retval None
- */
-void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd)
-{
-}
-
-/**
- * @brief SOF callback.
- * @param hpcd: PCD handle
- * @retval None
- */
-void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd)
-{
-}
-
-/**
- * @brief SOF callback.
- * @param hpcd: PCD handle
- * @param epnum: Endpoint Number
- * @retval None
- */
-void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
-{
- USBD_LL_IsoOUTIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum);
-}
-
-/**
- * @brief SOF callback.
- * @param hpcd: PCD handle
- * @param epnum: Endpoint Number
- * @retval None
- */
-void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
-{
- USBD_LL_IsoINIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum);
-}
-
-/**
- * @brief SOF callback.
- * @param hpcd: PCD handle
- * @retval None
- */
-void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd)
-{
- USBD_LL_DevConnected((USBD_HandleTypeDef*)hpcd->pData);
-}
-
-/**
- * @brief SOF callback.
- * @param hpcd: PCD handle
- * @retval None
- */
-void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd)
-{
- USBD_LL_DevDisconnected((USBD_HandleTypeDef*)hpcd->pData);
-}
-
-/*******************************************************************************
- LL Driver Interface (USB Device Library --> PCD)
-*******************************************************************************/
-
-/**
- * @brief Initializes the Low Level portion of the Device driver.
- * @param pdev: Device handle
- * @retval USBD Status
- */
-USBD_StatusTypeDef USBD_LL_Init(USBD_HandleTypeDef *pdev)
-{
- /* Set LL Driver parameters */
- hpcd.Instance = USB;
- hpcd.Init.dev_endpoints = 8;
- hpcd.Init.ep0_mps = 0x40;
- hpcd.Init.phy_itface = PCD_PHY_EMBEDDED;
- hpcd.Init.speed = PCD_SPEED_FULL;
- /* Link The driver to the stack */
- hpcd.pData = pdev;
- pdev->pData = &hpcd;
- /* Initialize LL Driver */
- HAL_PCD_Init(&hpcd);
-
- HAL_PCDEx_PMAConfig(&hpcd , 0x00 , PCD_SNG_BUF, 0x40);
- HAL_PCDEx_PMAConfig(&hpcd , 0x80 , PCD_SNG_BUF, 0x80);
- HAL_PCDEx_PMAConfig(&hpcd , CDC_IN_EP , PCD_SNG_BUF, 0xC0);
- HAL_PCDEx_PMAConfig(&hpcd , CDC_OUT_EP , PCD_SNG_BUF, 0x110);
- HAL_PCDEx_PMAConfig(&hpcd , CDC_CMD_EP , PCD_SNG_BUF, 0x100);
-
- return USBD_OK;
-}
-
-/**
- * @brief De-Initializes the Low Level portion of the Device driver.
- * @param pdev: Device handle
- * @retval USBD Status
- */
-USBD_StatusTypeDef USBD_LL_DeInit(USBD_HandleTypeDef *pdev)
-{
- HAL_PCD_DeInit((PCD_HandleTypeDef*)pdev->pData);
- return USBD_OK;
-}
-
-/**
- * @brief Starts the Low Level portion of the Device driver.
- * @param pdev: Device handle
- * @retval USBD Status
- */
-USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev)
-{
- HAL_PCD_Start((PCD_HandleTypeDef*)pdev->pData);
- return USBD_OK;
-}
-
-/**
- * @brief Stops the Low Level portion of the Device driver.
- * @param pdev: Device handle
- * @retval USBD Status
- */
-USBD_StatusTypeDef USBD_LL_Stop(USBD_HandleTypeDef *pdev)
-{
- HAL_PCD_Stop((PCD_HandleTypeDef*)pdev->pData);
- return USBD_OK;
-}
-
-/**
- * @brief Opens an endpoint of the Low Level Driver.
- * @param pdev: Device handle
- * @param ep_addr: Endpoint Number
- * @param ep_type: Endpoint Type
- * @param ep_mps: Endpoint Max Packet Size
- * @retval USBD Status
- */
-USBD_StatusTypeDef USBD_LL_OpenEP(USBD_HandleTypeDef *pdev,
- uint8_t ep_addr,
- uint8_t ep_type,
- uint16_t ep_mps)
-{
- HAL_PCD_EP_Open((PCD_HandleTypeDef*)pdev->pData,
- ep_addr,
- ep_mps,
- ep_type);
-
- return USBD_OK;
-}
-
-/**
- * @brief Closes an endpoint of the Low Level Driver.
- * @param pdev: Device handle
- * @param ep_addr: Endpoint Number
- * @retval USBD Status
- */
-USBD_StatusTypeDef USBD_LL_CloseEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
-{
- HAL_PCD_EP_Close((PCD_HandleTypeDef*)pdev->pData, ep_addr);
- return USBD_OK;
-}
-
-/**
- * @brief Flushes an endpoint of the Low Level Driver.
- * @param pdev: Device handle
- * @param ep_addr: Endpoint Number
- * @retval USBD Status
- */
-USBD_StatusTypeDef USBD_LL_FlushEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
-{
- HAL_PCD_EP_Flush((PCD_HandleTypeDef*)pdev->pData, ep_addr);
- return USBD_OK;
-}
-
-/**
- * @brief Sets a Stall condition on an endpoint of the Low Level Driver.
- * @param pdev: Device handle
- * @param ep_addr: Endpoint Number
- * @retval USBD Status
- */
-USBD_StatusTypeDef USBD_LL_StallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
-{
- HAL_PCD_EP_SetStall((PCD_HandleTypeDef*)pdev->pData, ep_addr);
- return USBD_OK;
-}
-
-/**
- * @brief Clears a Stall condition on an endpoint of the Low Level Driver.
- * @param pdev: Device handle
- * @param ep_addr: Endpoint Number
- * @retval USBD Status
- */
-USBD_StatusTypeDef USBD_LL_ClearStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
-{
- HAL_PCD_EP_ClrStall((PCD_HandleTypeDef*)pdev->pData, ep_addr);
- return USBD_OK;
-}
-
-/**
- * @brief Returns Stall condition.
- * @param pdev: Device handle
- * @param ep_addr: Endpoint Number
- * @retval Stall (1: Yes, 0: No)
- */
-uint8_t USBD_LL_IsStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
-{
- PCD_HandleTypeDef *hpcd = (PCD_HandleTypeDef*)pdev->pData;
-
- if((ep_addr & 0x80) == 0x80)
- {
- return hpcd->IN_ep[ep_addr & 0x7F].is_stall;
- }
- else
- {
- return hpcd->OUT_ep[ep_addr & 0x7F].is_stall;
- }
-}
-
-/**
- * @brief Assigns a USB address to the device.
- * @param pdev: Device handle
- * @param ep_addr: Endpoint Number
- * @retval USBD Status
- */
-USBD_StatusTypeDef USBD_LL_SetUSBAddress(USBD_HandleTypeDef *pdev, uint8_t dev_addr)
-{
- HAL_PCD_SetAddress((PCD_HandleTypeDef*)pdev->pData, dev_addr);
- return USBD_OK;
-}
-
-/**
- * @brief Transmits data over an endpoint.
- * @param pdev: Device handle
- * @param ep_addr: Endpoint Number
- * @param pbuf: Pointer to data to be sent
- * @param size: Data size
- * @retval USBD Status
- */
-USBD_StatusTypeDef USBD_LL_Transmit(USBD_HandleTypeDef *pdev,
- uint8_t ep_addr,
- uint8_t *pbuf,
- uint16_t size)
-{
- HAL_PCD_EP_Transmit((PCD_HandleTypeDef*)pdev->pData, ep_addr, pbuf, size);
- return USBD_OK;
-}
-
-/**
- * @brief Prepares an endpoint for reception.
- * @param pdev: Device handle
- * @param ep_addr: Endpoint Number
- * @param pbuf: Pointer to data to be received
- * @param size: Data size
- * @retval USBD Status
- */
-USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev,
- uint8_t ep_addr,
- uint8_t *pbuf,
- uint16_t size)
-{
- HAL_PCD_EP_Receive((PCD_HandleTypeDef*)pdev->pData, ep_addr, pbuf, size);
- return USBD_OK;
-}
-
-/**
- * @brief Returns the last transfered packet size.
- * @param pdev: Device handle
- * @param ep_addr: Endpoint Number
- * @retval Recived Data Size
- */
-uint32_t USBD_LL_GetRxDataSize(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
-{
- return HAL_PCD_EP_GetRxCount((PCD_HandleTypeDef*)pdev->pData, ep_addr);
-}
-
-/**
- * @brief Delays routine for the USB Device Library.
- * @param Delay: Delay in ms
- * @retval None
- */
-void USBD_LL_Delay(uint32_t Delay)
-{
- HAL_Delay(Delay);
-}
-
-/**
- * @brief static single allocation.
- * @param size: size of allocated memory
- * @retval None
- */
-void *USBD_static_malloc(uint32_t size)
-{
- static uint32_t mem[MAX_STATIC_ALLOC_SIZE];
- return mem;
-}
-
-/**
- * @brief Dummy memory free
- * @param *p pointer to allocated memory address
- * @retval None
- */
-void USBD_static_free(void *p)
-{
-
-}
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/fw/cdc-dials/Src/usbd_desc.c b/fw/cdc-dials/Src/usbd_desc.c
deleted file mode 100644
index 8cd1390..0000000
--- a/fw/cdc-dials/Src/usbd_desc.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/**
- ******************************************************************************
- * @file USB_Device/CDC_Standalone/Src/usbd_desc.c
- * @author MCD Application Team
- * @brief This file provides the USBD descriptors and string formating method.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics International N.V.
- * All rights reserved.</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted, provided that the following conditions are met:
- *
- * 1. Redistribution of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of other
- * contributors to this software may be used to endorse or promote products
- * derived from this software without specific written permission.
- * 4. This software, including modifications and/or derivative works of this
- * software, must execute solely and exclusively on microcontroller or
- * microprocessor devices manufactured by or for STMicroelectronics.
- * 5. Redistribution and use of this software other than as permitted under
- * this license is void and will automatically terminate your rights under
- * this license.
- *
- * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
- * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
- * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
- * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
- * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "usbd_core.h"
-#include "usbd_desc.h"
-#include "usbd_conf.h"
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-#define USBD_VID 0x0483
-#define USBD_PID 0x5740
-#define USBD_LANGID_STRING 0x409
-#define USBD_MANUFACTURER_STRING "Otter-Iron"
-#define USBD_PRODUCT_FS_STRING "chirp :3"
-#define USBD_CONFIGURATION_FS_STRING "mau"
-#define USBD_INTERFACE_FS_STRING ":o"
-
-/* Private macro -------------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-uint8_t *USBD_VCP_DeviceDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
-uint8_t *USBD_VCP_LangIDStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
-uint8_t *USBD_VCP_ManufacturerStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
-uint8_t *USBD_VCP_ProductStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
-uint8_t *USBD_VCP_SerialStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
-uint8_t *USBD_VCP_ConfigStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
-uint8_t *USBD_VCP_InterfaceStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
-#ifdef USB_SUPPORT_USER_STRING_DESC
-uint8_t *USBD_VCP_USRStringDesc (USBD_SpeedTypeDef speed, uint8_t idx, uint16_t *length);
-#endif /* USB_SUPPORT_USER_STRING_DESC */
-
-/* Private variables ---------------------------------------------------------*/
-USBD_DescriptorsTypeDef VCP_Desc = {
- USBD_VCP_DeviceDescriptor,
- USBD_VCP_LangIDStrDescriptor,
- USBD_VCP_ManufacturerStrDescriptor,
- USBD_VCP_ProductStrDescriptor,
- USBD_VCP_SerialStrDescriptor,
- USBD_VCP_ConfigStrDescriptor,
- USBD_VCP_InterfaceStrDescriptor,
-};
-
-/* USB Standard Device Descriptor */
-const uint8_t hUSBDDeviceDesc[USB_LEN_DEV_DESC]= {
- 0x12, /* bLength */
- USB_DESC_TYPE_DEVICE, /* bDescriptorType */
- 0x00, /* bcdUSB */
- 0x02,
- 0x00, /* bDeviceClass */
- 0x00, /* bDeviceSubClass */
- 0x00, /* bDeviceProtocol */
- USB_MAX_EP0_SIZE, /* bMaxPacketSize */
- LOBYTE(USBD_VID), /* idVendor */
- HIBYTE(USBD_VID), /* idVendor */
- LOBYTE(USBD_PID), /* idVendor */
- HIBYTE(USBD_PID), /* idVendor */
- 0x00, /* bcdDevice rel. 2.00 */
- 0x02,
- USBD_IDX_MFC_STR, /* Index of manufacturer string */
- USBD_IDX_PRODUCT_STR, /* Index of product string */
- USBD_IDX_SERIAL_STR, /* Index of serial number string */
- USBD_MAX_NUM_CONFIGURATION /* bNumConfigurations */
-}; /* USB_DeviceDescriptor */
-
-/* USB Standard Device Descriptor */
-const uint8_t USBD_LangIDDesc[USB_LEN_LANGID_STR_DESC]=
-{
- USB_LEN_LANGID_STR_DESC,
- USB_DESC_TYPE_STRING,
- LOBYTE(USBD_LANGID_STRING),
- HIBYTE(USBD_LANGID_STRING),
-};
-
-uint8_t USBD_StringSerial[USB_SIZ_STRING_SERIAL] =
-{
- USB_SIZ_STRING_SERIAL,
- USB_DESC_TYPE_STRING,
-};
-
-uint8_t USBD_StrDesc[USBD_MAX_STR_DESC_SIZ];
-
-/* Private functions ---------------------------------------------------------*/
-static void IntToUnicode (uint32_t value , uint8_t *pbuf , uint8_t len);
-static void Get_SerialNum(void);
-/**
- * @brief Returns the device descriptor.
- * @param speed: Current device speed
- * @param length: Pointer to data length variable
- * @retval Pointer to descriptor buffer
- */
-uint8_t *USBD_VCP_DeviceDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
-{
- *length = sizeof(hUSBDDeviceDesc);
- return (uint8_t*)hUSBDDeviceDesc;
-}
-
-/**
- * @brief Returns the LangID string descriptor.
- * @param speed: Current device speed
- * @param length: Pointer to data length variable
- * @retval Pointer to descriptor buffer
- */
-uint8_t *USBD_VCP_LangIDStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
-{
- *length = sizeof(USBD_LangIDDesc);
- return (uint8_t*)USBD_LangIDDesc;
-}
-
-/**
- * @brief Returns the product string descriptor.
- * @param speed: Current device speed
- * @param length: Pointer to data length variable
- * @retval Pointer to descriptor buffer
- */
-uint8_t *USBD_VCP_ProductStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
-{
- USBD_GetString((uint8_t *)USBD_PRODUCT_FS_STRING, USBD_StrDesc, length);
- return USBD_StrDesc;
-}
-
-/**
- * @brief Returns the manufacturer string descriptor.
- * @param speed: Current device speed
- * @param length: Pointer to data length variable
- * @retval Pointer to descriptor buffer
- */
-uint8_t *USBD_VCP_ManufacturerStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
-{
- USBD_GetString((uint8_t *)USBD_MANUFACTURER_STRING, USBD_StrDesc, length);
- return USBD_StrDesc;
-}
-
-/**
- * @brief Returns the serial number string descriptor.
- * @param speed: Current device speed
- * @param length: Pointer to data length variable
- * @retval Pointer to descriptor buffer
- */
-uint8_t *USBD_VCP_SerialStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
-{
- *length = USB_SIZ_STRING_SERIAL;
-
- /* Update the serial number string descriptor with the data from the unique ID*/
- Get_SerialNum();
-
- return USBD_StringSerial;
-}
-
-/**
- * @brief Returns the configuration string descriptor.
- * @param speed: Current device speed
- * @param length: Pointer to data length variable
- * @retval Pointer to descriptor buffer
- */
-uint8_t *USBD_VCP_ConfigStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
-{
- USBD_GetString((uint8_t *)USBD_CONFIGURATION_FS_STRING, USBD_StrDesc, length);
- return USBD_StrDesc;
-}
-
-/**
- * @brief Returns the interface string descriptor.
- * @param speed: Current device speed
- * @param length: Pointer to data length variable
- * @retval Pointer to descriptor buffer
- */
-uint8_t *USBD_VCP_InterfaceStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
-{
- USBD_GetString((uint8_t *)USBD_INTERFACE_FS_STRING, USBD_StrDesc, length);
- return USBD_StrDesc;
-}
-
-/**
- * @brief Create the serial number string descriptor
- * @param None
- * @retval None
- */
-static void Get_SerialNum(void)
-{
- uint32_t deviceserial0, deviceserial1, deviceserial2;
-
- deviceserial0 = *(uint32_t*)DEVICE_ID1;
- deviceserial1 = *(uint32_t*)DEVICE_ID2;
- deviceserial2 = *(uint32_t*)DEVICE_ID3;
-
- deviceserial0 += deviceserial2;
-
- if (deviceserial0 != 0)
- {
- IntToUnicode (deviceserial0, &USBD_StringSerial[2] ,8);
- IntToUnicode (deviceserial1, &USBD_StringSerial[18] ,4);
- }
-}
-
-/**
- * @brief Convert Hex 32Bits value into char
- * @param value: value to convert
- * @param pbuf: pointer to the buffer
- * @param len: buffer length
- * @retval None
- */
-static void IntToUnicode (uint32_t value , uint8_t *pbuf , uint8_t len)
-{
- uint8_t idx = 0;
-
- for( idx = 0 ; idx < len ; idx ++)
- {
- if( ((value >> 28)) < 0xA )
- {
- pbuf[ 2* idx] = (value >> 28) + '0';
- }
- else
- {
- pbuf[2* idx] = (value >> 28) + 'A' - 10;
- }
-
- value = value << 4;
-
- pbuf[ 2* idx + 1] = 0;
- }
-}
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
generated by cgit (git 2.34.1) at 2024-07-04 02:06:02 +0000