diff options
Diffstat (limited to 'fw/cdc-dials/Src/usbd_conf.c')
| -rw-r--r-- | fw/cdc-dials/Src/usbd_conf.c | 464 |
1 files changed, 0 insertions, 464 deletions
diff --git a/fw/cdc-dials/Src/usbd_conf.c b/fw/cdc-dials/Src/usbd_conf.c deleted file mode 100644 index b3fb125..0000000 --- a/fw/cdc-dials/Src/usbd_conf.c +++ /dev/null @@ -1,464 +0,0 @@ -/**
- ******************************************************************************
- * @file USB_Device/CDC_Standalone/Src/usbd_conf.c
- * @author MCD Application Team
- * @brief This file implements the USB Device library callbacks and MSP
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics International N.V.
- * All rights reserved.</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted, provided that the following conditions are met:
- *
- * 1. Redistribution of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of other
- * contributors to this software may be used to endorse or promote products
- * derived from this software without specific written permission.
- * 4. This software, including modifications and/or derivative works of this
- * software, must execute solely and exclusively on microcontroller or
- * microprocessor devices manufactured by or for STMicroelectronics.
- * 5. Redistribution and use of this software other than as permitted under
- * this license is void and will automatically terminate your rights under
- * this license.
- *
- * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
- * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
- * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
- * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
- * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_hal.h"
-#include "usbd_core.h"
-#include "main.h"
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-PCD_HandleTypeDef hpcd;
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/*******************************************************************************
- PCD BSP Routines
-*******************************************************************************/
-
-/**
- * @brief Initializes the PCD MSP.
- * @param hpcd: PCD handle
- * @retval None
- */
-void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd)
-{
- GPIO_InitTypeDef GPIO_InitStruct;
-
- /* Enable the GPIOA clock */
- __HAL_RCC_GPIOA_CLK_ENABLE();
-
- /* Configure USB DM and DP pins.
- This is optional, and maintained only for user guidance. */
- GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12);
- GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
- GPIO_InitStruct.Alternate = GPIO_AF2_USB;
- HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-
- /* Enable USB FS Clock */
- __HAL_RCC_USB_CLK_ENABLE();
-
- /* Set USB FS Interrupt priority */
- HAL_NVIC_SetPriority(USB_IRQn, 3, 0);
-
- /* Enable USB FS Interrupt */
- HAL_NVIC_EnableIRQ(USB_IRQn);
-}
-
-/**
- * @brief De-Initializes the PCD MSP.
- * @param hpcd: PCD handle
- * @retval None
- */
-void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd)
-{
- /* Disable USB FS Clock */
- __HAL_RCC_USB_CLK_DISABLE();
-}
-
-/*******************************************************************************
- LL Driver Callbacks (PCD -> USB Device Library)
-*******************************************************************************/
-
-/**
- * @brief SOF callback.
- * @param hpcd: PCD handle
- * @retval None
- */
-void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd)
-{
- USBD_LL_SetupStage((USBD_HandleTypeDef*)hpcd->pData, (uint8_t *)hpcd->Setup);
-}
-
-/**
- * @brief SOF callback.
- * @param hpcd: PCD handle
- * @param epnum: Endpoint Number
- * @retval None
- */
-void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
-{
- USBD_LL_DataOutStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->OUT_ep[epnum].xfer_buff);
-}
-
-/**
- * @brief SOF callback.
- * @param hpcd: PCD handle
- * @param epnum: Endpoint Number
- * @retval None
- */
-void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
-{
- USBD_LL_DataInStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->IN_ep[epnum].xfer_buff);
-}
-
-/**
- * @brief SOF callback.
- * @param hpcd: PCD handle
- * @retval None
- */
-void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd)
-{
- USBD_LL_SOF((USBD_HandleTypeDef*)hpcd->pData);
-}
-
-/**
- * @brief SOF callback.
- * @param hpcd: PCD handle
- * @retval None
- */
-void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd)
-{
- USBD_LL_SetSpeed((USBD_HandleTypeDef*)hpcd->pData, USBD_SPEED_FULL);
- /* Reset Device */
- USBD_LL_Reset((USBD_HandleTypeDef*)hpcd->pData);
-}
-
-/**
- * @brief SOF callback.
- * @param hpcd: PCD handle
- * @retval None
- */
-void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd)
-{
-}
-
-/**
- * @brief SOF callback.
- * @param hpcd: PCD handle
- * @retval None
- */
-void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd)
-{
-}
-
-/**
- * @brief SOF callback.
- * @param hpcd: PCD handle
- * @param epnum: Endpoint Number
- * @retval None
- */
-void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
-{
- USBD_LL_IsoOUTIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum);
-}
-
-/**
- * @brief SOF callback.
- * @param hpcd: PCD handle
- * @param epnum: Endpoint Number
- * @retval None
- */
-void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
-{
- USBD_LL_IsoINIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum);
-}
-
-/**
- * @brief SOF callback.
- * @param hpcd: PCD handle
- * @retval None
- */
-void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd)
-{
- USBD_LL_DevConnected((USBD_HandleTypeDef*)hpcd->pData);
-}
-
-/**
- * @brief SOF callback.
- * @param hpcd: PCD handle
- * @retval None
- */
-void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd)
-{
- USBD_LL_DevDisconnected((USBD_HandleTypeDef*)hpcd->pData);
-}
-
-/*******************************************************************************
- LL Driver Interface (USB Device Library --> PCD)
-*******************************************************************************/
-
-/**
- * @brief Initializes the Low Level portion of the Device driver.
- * @param pdev: Device handle
- * @retval USBD Status
- */
-USBD_StatusTypeDef USBD_LL_Init(USBD_HandleTypeDef *pdev)
-{
- /* Set LL Driver parameters */
- hpcd.Instance = USB;
- hpcd.Init.dev_endpoints = 8;
- hpcd.Init.ep0_mps = 0x40;
- hpcd.Init.phy_itface = PCD_PHY_EMBEDDED;
- hpcd.Init.speed = PCD_SPEED_FULL;
- /* Link The driver to the stack */
- hpcd.pData = pdev;
- pdev->pData = &hpcd;
- /* Initialize LL Driver */
- HAL_PCD_Init(&hpcd);
-
- HAL_PCDEx_PMAConfig(&hpcd , 0x00 , PCD_SNG_BUF, 0x40);
- HAL_PCDEx_PMAConfig(&hpcd , 0x80 , PCD_SNG_BUF, 0x80);
- HAL_PCDEx_PMAConfig(&hpcd , CDC_IN_EP , PCD_SNG_BUF, 0xC0);
- HAL_PCDEx_PMAConfig(&hpcd , CDC_OUT_EP , PCD_SNG_BUF, 0x110);
- HAL_PCDEx_PMAConfig(&hpcd , CDC_CMD_EP , PCD_SNG_BUF, 0x100);
-
- return USBD_OK;
-}
-
-/**
- * @brief De-Initializes the Low Level portion of the Device driver.
- * @param pdev: Device handle
- * @retval USBD Status
- */
-USBD_StatusTypeDef USBD_LL_DeInit(USBD_HandleTypeDef *pdev)
-{
- HAL_PCD_DeInit((PCD_HandleTypeDef*)pdev->pData);
- return USBD_OK;
-}
-
-/**
- * @brief Starts the Low Level portion of the Device driver.
- * @param pdev: Device handle
- * @retval USBD Status
- */
-USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev)
-{
- HAL_PCD_Start((PCD_HandleTypeDef*)pdev->pData);
- return USBD_OK;
-}
-
-/**
- * @brief Stops the Low Level portion of the Device driver.
- * @param pdev: Device handle
- * @retval USBD Status
- */
-USBD_StatusTypeDef USBD_LL_Stop(USBD_HandleTypeDef *pdev)
-{
- HAL_PCD_Stop((PCD_HandleTypeDef*)pdev->pData);
- return USBD_OK;
-}
-
-/**
- * @brief Opens an endpoint of the Low Level Driver.
- * @param pdev: Device handle
- * @param ep_addr: Endpoint Number
- * @param ep_type: Endpoint Type
- * @param ep_mps: Endpoint Max Packet Size
- * @retval USBD Status
- */
-USBD_StatusTypeDef USBD_LL_OpenEP(USBD_HandleTypeDef *pdev,
- uint8_t ep_addr,
- uint8_t ep_type,
- uint16_t ep_mps)
-{
- HAL_PCD_EP_Open((PCD_HandleTypeDef*)pdev->pData,
- ep_addr,
- ep_mps,
- ep_type);
-
- return USBD_OK;
-}
-
-/**
- * @brief Closes an endpoint of the Low Level Driver.
- * @param pdev: Device handle
- * @param ep_addr: Endpoint Number
- * @retval USBD Status
- */
-USBD_StatusTypeDef USBD_LL_CloseEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
-{
- HAL_PCD_EP_Close((PCD_HandleTypeDef*)pdev->pData, ep_addr);
- return USBD_OK;
-}
-
-/**
- * @brief Flushes an endpoint of the Low Level Driver.
- * @param pdev: Device handle
- * @param ep_addr: Endpoint Number
- * @retval USBD Status
- */
-USBD_StatusTypeDef USBD_LL_FlushEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
-{
- HAL_PCD_EP_Flush((PCD_HandleTypeDef*)pdev->pData, ep_addr);
- return USBD_OK;
-}
-
-/**
- * @brief Sets a Stall condition on an endpoint of the Low Level Driver.
- * @param pdev: Device handle
- * @param ep_addr: Endpoint Number
- * @retval USBD Status
- */
-USBD_StatusTypeDef USBD_LL_StallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
-{
- HAL_PCD_EP_SetStall((PCD_HandleTypeDef*)pdev->pData, ep_addr);
- return USBD_OK;
-}
-
-/**
- * @brief Clears a Stall condition on an endpoint of the Low Level Driver.
- * @param pdev: Device handle
- * @param ep_addr: Endpoint Number
- * @retval USBD Status
- */
-USBD_StatusTypeDef USBD_LL_ClearStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
-{
- HAL_PCD_EP_ClrStall((PCD_HandleTypeDef*)pdev->pData, ep_addr);
- return USBD_OK;
-}
-
-/**
- * @brief Returns Stall condition.
- * @param pdev: Device handle
- * @param ep_addr: Endpoint Number
- * @retval Stall (1: Yes, 0: No)
- */
-uint8_t USBD_LL_IsStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
-{
- PCD_HandleTypeDef *hpcd = (PCD_HandleTypeDef*)pdev->pData;
-
- if((ep_addr & 0x80) == 0x80)
- {
- return hpcd->IN_ep[ep_addr & 0x7F].is_stall;
- }
- else
- {
- return hpcd->OUT_ep[ep_addr & 0x7F].is_stall;
- }
-}
-
-/**
- * @brief Assigns a USB address to the device.
- * @param pdev: Device handle
- * @param ep_addr: Endpoint Number
- * @retval USBD Status
- */
-USBD_StatusTypeDef USBD_LL_SetUSBAddress(USBD_HandleTypeDef *pdev, uint8_t dev_addr)
-{
- HAL_PCD_SetAddress((PCD_HandleTypeDef*)pdev->pData, dev_addr);
- return USBD_OK;
-}
-
-/**
- * @brief Transmits data over an endpoint.
- * @param pdev: Device handle
- * @param ep_addr: Endpoint Number
- * @param pbuf: Pointer to data to be sent
- * @param size: Data size
- * @retval USBD Status
- */
-USBD_StatusTypeDef USBD_LL_Transmit(USBD_HandleTypeDef *pdev,
- uint8_t ep_addr,
- uint8_t *pbuf,
- uint16_t size)
-{
- HAL_PCD_EP_Transmit((PCD_HandleTypeDef*)pdev->pData, ep_addr, pbuf, size);
- return USBD_OK;
-}
-
-/**
- * @brief Prepares an endpoint for reception.
- * @param pdev: Device handle
- * @param ep_addr: Endpoint Number
- * @param pbuf: Pointer to data to be received
- * @param size: Data size
- * @retval USBD Status
- */
-USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev,
- uint8_t ep_addr,
- uint8_t *pbuf,
- uint16_t size)
-{
- HAL_PCD_EP_Receive((PCD_HandleTypeDef*)pdev->pData, ep_addr, pbuf, size);
- return USBD_OK;
-}
-
-/**
- * @brief Returns the last transfered packet size.
- * @param pdev: Device handle
- * @param ep_addr: Endpoint Number
- * @retval Recived Data Size
- */
-uint32_t USBD_LL_GetRxDataSize(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
-{
- return HAL_PCD_EP_GetRxCount((PCD_HandleTypeDef*)pdev->pData, ep_addr);
-}
-
-/**
- * @brief Delays routine for the USB Device Library.
- * @param Delay: Delay in ms
- * @retval None
- */
-void USBD_LL_Delay(uint32_t Delay)
-{
- HAL_Delay(Delay);
-}
-
-/**
- * @brief static single allocation.
- * @param size: size of allocated memory
- * @retval None
- */
-void *USBD_static_malloc(uint32_t size)
-{
- static uint32_t mem[MAX_STATIC_ALLOC_SIZE];
- return mem;
-}
-
-/**
- * @brief Dummy memory free
- * @param *p pointer to allocated memory address
- * @retval None
- */
-void USBD_static_free(void *p)
-{
-
-}
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|