Move firmware into subdirectory

1 files changed, 0 insertions, 274 deletions

diff --git a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c b/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c
deleted file mode 100644
index c14370b..0000000
--- a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c
+++ /dev/null
@@ -1,274 +0,0 @@
-/**

-  ******************************************************************************

-  * @file    stm32f0xx_hal_pwr_ex.c

-  * @author  MCD Application Team

-  * @brief   Extended PWR HAL module driver.

-  *          This file provides firmware functions to manage the following

-  *          functionalities of the Power Controller (PWR) peripheral:

-  *           + Extended Initialization and de-initialization functions

-  *           + Extended Peripheral Control functions

-  *         

-  ******************************************************************************

-  * @attention

-  *

-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.

-  * All rights reserved.</center></h2>

-  *

-  * This software component is licensed by ST under BSD 3-Clause license,

-  * the "License"; You may not use this file except in compliance with the

-  * License. You may obtain a copy of the License at:

-  *                        opensource.org/licenses/BSD-3-Clause

-  *

-  ******************************************************************************

-  */

-

-/* Includes ------------------------------------------------------------------*/

-#include "stm32f0xx_hal.h"

-

-/** @addtogroup STM32F0xx_HAL_Driver

-  * @{

-  */

-

-/** @defgroup PWREx PWREx

-  * @brief    PWREx HAL module driver

-  * @{

-  */

-

-#ifdef HAL_PWR_MODULE_ENABLED

-

-/* Private typedef -----------------------------------------------------------*/

-/* Private define ------------------------------------------------------------*/

-/** @defgroup PWREx_Private_Constants PWREx Private Constants

-  * @{

-  */

-#define PVD_MODE_IT               (0x00010000U)

-#define PVD_MODE_EVT              (0x00020000U)

-#define PVD_RISING_EDGE           (0x00000001U)

-#define PVD_FALLING_EDGE          (0x00000002U)

-/**

-  * @}

-  */

- 

-/* Private macro -------------------------------------------------------------*/

-/* Private variables ---------------------------------------------------------*/

-/* Private function prototypes -----------------------------------------------*/

-/* Exported functions ---------------------------------------------------------*/

-

-/** @defgroup PWREx_Exported_Functions PWREx Exported Functions

-  * @{

-  */

-

-/** @defgroup PWREx_Exported_Functions_Group1 Peripheral Extended Control Functions

-  *  @brief   Extended Peripheral Control functions

-  *

-@verbatim

-

- ===============================================================================

-                 ##### Peripheral extended control functions #####

- ===============================================================================

-    

-    *** PVD configuration ***

-    =========================

-    [..]

-      (+) The PVD is used to monitor the VDD power supply by comparing it to a

-          threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR).

-      (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower

-          than the PVD threshold. This event is internally connected to the EXTI

-          line16 and can generate an interrupt if enabled. This is done through

-          HAL_PWR_ConfigPVD(), HAL_PWR_EnablePVD() functions.

-      (+) The PVD is stopped in Standby mode.

-      -@- PVD is not available on STM32F030x4/x6/x8

-

-    *** VDDIO2 Monitor Configuration ***

-    ====================================

-    [..]

-      (+) VDDIO2 monitor is used to monitor the VDDIO2 power supply by comparing it 

-          to VREFInt Voltage

-      (+) This monitor is internally connected to the EXTI line31

-          and can generate an interrupt if enabled. This is done through

-          HAL_PWREx_EnableVddio2Monitor() function.

-      -@- VDDIO2 is available on STM32F07x/09x/04x

-                    

-@endverbatim

-  * @{

-  */

-

-#if defined (STM32F031x6) || defined (STM32F051x8) || \

-    defined (STM32F071xB) || defined (STM32F091xC) || \

-    defined (STM32F042x6) || defined (STM32F072xB)

-/**

-  * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD).

-  * @param sConfigPVD pointer to an PWR_PVDTypeDef structure that contains the configuration

-  *        information for the PVD.

-  * @note Refer to the electrical characteristics of your device datasheet for

-  *         more details about the voltage threshold corresponding to each

-  *         detection level.

-  * @retval None

-  */

-void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD)

-{

-  /* Check the parameters */

-  assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel));

-  assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode));

-

-  /* Set PLS[7:5] bits according to PVDLevel value */

-  MODIFY_REG(PWR->CR, PWR_CR_PLS, sConfigPVD->PVDLevel);

-  

-  /* Clear any previous config. Keep it clear if no event or IT mode is selected */

-  __HAL_PWR_PVD_EXTI_DISABLE_EVENT();

-  __HAL_PWR_PVD_EXTI_DISABLE_IT();

-  __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();

-

-  /* Configure interrupt mode */

-  if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT)

-  {

-    __HAL_PWR_PVD_EXTI_ENABLE_IT();

-  }

-  

-  /* Configure event mode */

-  if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT)

-  {

-    __HAL_PWR_PVD_EXTI_ENABLE_EVENT();

-  }

-  

-  /* Configure the edge */

-  if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE)

-  {

-    __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();

-  }

-  

-  if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE)

-  {

-    __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();

-  }

-}

-

-/**

-  * @brief Enables the Power Voltage Detector(PVD).

-  * @retval None

-  */

-void HAL_PWR_EnablePVD(void)

-{

-  PWR->CR |= (uint32_t)PWR_CR_PVDE;

-}

-

-/**

-  * @brief Disables the Power Voltage Detector(PVD).

-  * @retval None

-  */

-void HAL_PWR_DisablePVD(void)

-{

-  PWR->CR &= ~((uint32_t)PWR_CR_PVDE);

-}

-

-/**

-  * @brief This function handles the PWR PVD interrupt request.

-  * @note This API should be called under the  PVD_IRQHandler() or PVD_VDDIO2_IRQHandler().

-  * @retval None

-  */

-void HAL_PWR_PVD_IRQHandler(void)

-{

-  /* Check PWR exti flag */

-  if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET)

-  {

-    /* PWR PVD interrupt user callback */

-    HAL_PWR_PVDCallback();

-

-    /* Clear PWR Exti pending bit */

-    __HAL_PWR_PVD_EXTI_CLEAR_FLAG();

-  }

-}

-

-/**

-  * @brief PWR PVD interrupt callback

-  * @retval None

-  */

-__weak void HAL_PWR_PVDCallback(void)

-{

-  /* NOTE : This function Should not be modified, when the callback is needed,

-            the HAL_PWR_PVDCallback could be implemented in the user file

-   */

-}

-

-#endif /* defined (STM32F031x6) || defined (STM32F051x8) || */

-       /* defined (STM32F071xB) || defined (STM32F091xC) || */

-       /* defined (STM32F042x6) || defined (STM32F072xB)    */

-

-#if defined (STM32F042x6) || defined (STM32F048xx) || \

-    defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \

-    defined (STM32F091xC) || defined (STM32F098xx)

-/**

-  * @brief Enable VDDIO2 monitor: enable Exti 31 and falling edge detection.

-  * @note If Exti 31 is enable correlty and VDDIO2 voltage goes below Vrefint,

-          an interrupt is generated Irq line 1.

-          NVIS has to be enable by user.

-  * @retval None

-  */

-void HAL_PWREx_EnableVddio2Monitor(void)

-{

-  __HAL_PWR_VDDIO2_EXTI_ENABLE_IT();

-  __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE();

-}

-

-/**

-  * @brief Disable the Vddio2 Monitor.

-  * @retval None

-  */

-void HAL_PWREx_DisableVddio2Monitor(void)

-{

-  __HAL_PWR_VDDIO2_EXTI_DISABLE_IT();

-  __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE();

-

-}

-

-/**

-  * @brief This function handles the PWR Vddio2 monitor interrupt request.

-  * @note This API should be called under the VDDIO2_IRQHandler() PVD_VDDIO2_IRQHandler().

-  * @retval None

-  */

-void HAL_PWREx_Vddio2Monitor_IRQHandler(void)

-{

-  /* Check PWR exti flag */

-  if(__HAL_PWR_VDDIO2_EXTI_GET_FLAG() != RESET)

-  {

-    /* PWR Vddio2 monitor interrupt user callback */

-    HAL_PWREx_Vddio2MonitorCallback();

-

-    /* Clear PWR Exti pending bit */

-    __HAL_PWR_VDDIO2_EXTI_CLEAR_FLAG();

-  }

-}

-

-/**

-  * @brief PWR Vddio2 Monitor interrupt callback

-  * @retval None

-  */

-__weak void HAL_PWREx_Vddio2MonitorCallback(void)

-{

-  /* NOTE : This function Should not be modified, when the callback is needed,

-            the HAL_PWREx_Vddio2MonitorCallback could be implemented in the user file

-   */

-}

-

-#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \

-          defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \

-          defined (STM32F091xC) || defined (STM32F098xx) */

-

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-#endif /* HAL_PWR_MODULE_ENABLED */

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/