summaryrefslogtreecommitdiff
path: root/NN/NN_Lib_Tests
diff options
context:
space:
mode:
Diffstat (limited to 'NN/NN_Lib_Tests')
-rw-r--r--NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM0/startup_ARMCM0.s242
-rw-r--r--NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM0/system_ARMCM0.c56
-rw-r--r--NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM3/startup_ARMCM3.s262
-rw-r--r--NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM3/system_ARMCM3.c68
-rw-r--r--NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4/startup_ARMCM4.s262
-rw-r--r--NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4/system_ARMCM4.c83
-rw-r--r--NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4_FP/startup_ARMCM4.s262
-rw-r--r--NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4_FP/system_ARMCM4.c83
-rw-r--r--NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM7_SP/gcc_arm.ld196
-rw-r--r--NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM7_SP/startup_ARMCM7.c295
-rw-r--r--NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM7_SP/startup_ARMCM7.s262
-rw-r--r--NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM7_SP/system_ARMCM7.c85
-rw-r--r--NN/NN_Lib_Tests/nn_test/RTE/Device/STM32F411RETx/startup_stm32f411xe.s395
-rw-r--r--NN/NN_Lib_Tests/nn_test/RTE/Device/STM32F411RETx/system_stm32f4xx.c763
-rw-r--r--NN/NN_Lib_Tests/nn_test/runTest.bat57
15 files changed, 3371 insertions, 0 deletions
diff --git a/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM0/startup_ARMCM0.s b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM0/startup_ARMCM0.s
new file mode 100644
index 0000000..9fc447d
--- /dev/null
+++ b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM0/startup_ARMCM0.s
@@ -0,0 +1,242 @@
+;/**************************************************************************//**
+; * @file startup_ARMCM0.s
+; * @brief CMSIS Core Device Startup File for
+; * ARMCM0 Device Series
+; * @version V5.00
+; * @date 02. March 2016
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;/*
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+;*/
+
+
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000C00
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WDT_IRQHandler ; 0: Watchdog Timer
+ DCD RTC_IRQHandler ; 1: Real Time Clock
+ DCD TIM0_IRQHandler ; 2: Timer0 / Timer1
+ DCD TIM2_IRQHandler ; 3: Timer2 / Timer3
+ DCD MCIA_IRQHandler ; 4: MCIa
+ DCD MCIB_IRQHandler ; 5: MCIb
+ DCD UART0_IRQHandler ; 6: UART0 - DUT FPGA
+ DCD UART1_IRQHandler ; 7: UART1 - DUT FPGA
+ DCD UART2_IRQHandler ; 8: UART2 - DUT FPGA
+ DCD UART4_IRQHandler ; 9: UART4 - not connected
+ DCD AACI_IRQHandler ; 10: AACI / AC97
+ DCD CLCD_IRQHandler ; 11: CLCD Combined Interrupt
+ DCD ENET_IRQHandler ; 12: Ethernet
+ DCD USBDC_IRQHandler ; 13: USB Device
+ DCD USBHC_IRQHandler ; 14: USB Host Controller
+ DCD CHLCD_IRQHandler ; 15: Character LCD
+ DCD FLEXRAY_IRQHandler ; 16: Flexray
+ DCD CAN_IRQHandler ; 17: CAN
+ DCD LIN_IRQHandler ; 18: LIN
+ DCD I2C_IRQHandler ; 19: I2C ADC/DAC
+ DCD 0 ; 20: Reserved
+ DCD 0 ; 21: Reserved
+ DCD 0 ; 22: Reserved
+ DCD 0 ; 23: Reserved
+ DCD 0 ; 24: Reserved
+ DCD 0 ; 25: Reserved
+ DCD 0 ; 26: Reserved
+ DCD 0 ; 27: Reserved
+ DCD CPU_CLCD_IRQHandler ; 28: Reserved - CPU FPGA CLCD
+ DCD 0 ; 29: Reserved - CPU FPGA
+ DCD UART3_IRQHandler ; 30: UART3 - CPU FPGA
+ DCD SPI_IRQHandler ; 31: SPI Touchscreen - CPU FPGA
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+
+; Reset Handler
+
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT SystemInit
+ IMPORT __main
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WDT_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT TIM0_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT MCIA_IRQHandler [WEAK]
+ EXPORT MCIB_IRQHandler [WEAK]
+ EXPORT UART0_IRQHandler [WEAK]
+ EXPORT UART1_IRQHandler [WEAK]
+ EXPORT UART2_IRQHandler [WEAK]
+ EXPORT UART3_IRQHandler [WEAK]
+ EXPORT UART4_IRQHandler [WEAK]
+ EXPORT AACI_IRQHandler [WEAK]
+ EXPORT CLCD_IRQHandler [WEAK]
+ EXPORT ENET_IRQHandler [WEAK]
+ EXPORT USBDC_IRQHandler [WEAK]
+ EXPORT USBHC_IRQHandler [WEAK]
+ EXPORT CHLCD_IRQHandler [WEAK]
+ EXPORT FLEXRAY_IRQHandler [WEAK]
+ EXPORT CAN_IRQHandler [WEAK]
+ EXPORT LIN_IRQHandler [WEAK]
+ EXPORT I2C_IRQHandler [WEAK]
+ EXPORT CPU_CLCD_IRQHandler [WEAK]
+ EXPORT SPI_IRQHandler [WEAK]
+
+WDT_IRQHandler
+RTC_IRQHandler
+TIM0_IRQHandler
+TIM2_IRQHandler
+MCIA_IRQHandler
+MCIB_IRQHandler
+UART0_IRQHandler
+UART1_IRQHandler
+UART2_IRQHandler
+UART3_IRQHandler
+UART4_IRQHandler
+AACI_IRQHandler
+CLCD_IRQHandler
+ENET_IRQHandler
+USBDC_IRQHandler
+USBHC_IRQHandler
+CHLCD_IRQHandler
+FLEXRAY_IRQHandler
+CAN_IRQHandler
+LIN_IRQHandler
+I2C_IRQHandler
+CPU_CLCD_IRQHandler
+SPI_IRQHandler
+ B .
+
+ ENDP
+
+
+ ALIGN
+
+
+; User Initial Stack & Heap
+
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap PROC
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+ ENDP
+
+ ALIGN
+
+ ENDIF
+
+
+ END
diff --git a/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM0/system_ARMCM0.c b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM0/system_ARMCM0.c
new file mode 100644
index 0000000..66829ad
--- /dev/null
+++ b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM0/system_ARMCM0.c
@@ -0,0 +1,56 @@
+/**************************************************************************//**
+ * @file system_ARMCM0.c
+ * @brief CMSIS Device System Source File for
+ * ARMCM0 Device Series
+ * @version V5.00
+ * @date 08. April 2016
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "ARMCM0.h"
+
+/*----------------------------------------------------------------------------
+ Define clocks
+ *----------------------------------------------------------------------------*/
+#define XTAL ( 5000000U) /* Oscillator frequency */
+
+#define SYSTEM_CLOCK (5 * XTAL)
+
+
+/*----------------------------------------------------------------------------
+ System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;
+
+
+/*----------------------------------------------------------------------------
+ System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+ SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+ System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+ SystemCoreClock = SYSTEM_CLOCK;
+}
diff --git a/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM3/startup_ARMCM3.s b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM3/startup_ARMCM3.s
new file mode 100644
index 0000000..e3ea17f
--- /dev/null
+++ b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM3/startup_ARMCM3.s
@@ -0,0 +1,262 @@
+;/**************************************************************************//**
+; * @file startup_ARMCM3.s
+; * @brief CMSIS Core Device Startup File for
+; * ARMCM3 Device Series
+; * @version V5.00
+; * @date 02. March 2016
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;/*
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+;*/
+
+
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00080000
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WDT_IRQHandler ; 0: Watchdog Timer
+ DCD RTC_IRQHandler ; 1: Real Time Clock
+ DCD TIM0_IRQHandler ; 2: Timer0 / Timer1
+ DCD TIM2_IRQHandler ; 3: Timer2 / Timer3
+ DCD MCIA_IRQHandler ; 4: MCIa
+ DCD MCIB_IRQHandler ; 5: MCIb
+ DCD UART0_IRQHandler ; 6: UART0 - DUT FPGA
+ DCD UART1_IRQHandler ; 7: UART1 - DUT FPGA
+ DCD UART2_IRQHandler ; 8: UART2 - DUT FPGA
+ DCD UART4_IRQHandler ; 9: UART4 - not connected
+ DCD AACI_IRQHandler ; 10: AACI / AC97
+ DCD CLCD_IRQHandler ; 11: CLCD Combined Interrupt
+ DCD ENET_IRQHandler ; 12: Ethernet
+ DCD USBDC_IRQHandler ; 13: USB Device
+ DCD USBHC_IRQHandler ; 14: USB Host Controller
+ DCD CHLCD_IRQHandler ; 15: Character LCD
+ DCD FLEXRAY_IRQHandler ; 16: Flexray
+ DCD CAN_IRQHandler ; 17: CAN
+ DCD LIN_IRQHandler ; 18: LIN
+ DCD I2C_IRQHandler ; 19: I2C ADC/DAC
+ DCD 0 ; 20: Reserved
+ DCD 0 ; 21: Reserved
+ DCD 0 ; 22: Reserved
+ DCD 0 ; 23: Reserved
+ DCD 0 ; 24: Reserved
+ DCD 0 ; 25: Reserved
+ DCD 0 ; 26: Reserved
+ DCD 0 ; 27: Reserved
+ DCD CPU_CLCD_IRQHandler ; 28: Reserved - CPU FPGA CLCD
+ DCD 0 ; 29: Reserved - CPU FPGA
+ DCD UART3_IRQHandler ; 30: UART3 - CPU FPGA
+ DCD SPI_IRQHandler ; 31: SPI Touchscreen - CPU FPGA
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+
+; Reset Handler
+
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT SystemInit
+ IMPORT __main
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+MemManage_Handler\
+ PROC
+ EXPORT MemManage_Handler [WEAK]
+ B .
+ ENDP
+BusFault_Handler\
+ PROC
+ EXPORT BusFault_Handler [WEAK]
+ B .
+ ENDP
+UsageFault_Handler\
+ PROC
+ EXPORT UsageFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+DebugMon_Handler\
+ PROC
+ EXPORT DebugMon_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WDT_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT TIM0_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT MCIA_IRQHandler [WEAK]
+ EXPORT MCIB_IRQHandler [WEAK]
+ EXPORT UART0_IRQHandler [WEAK]
+ EXPORT UART1_IRQHandler [WEAK]
+ EXPORT UART2_IRQHandler [WEAK]
+ EXPORT UART3_IRQHandler [WEAK]
+ EXPORT UART4_IRQHandler [WEAK]
+ EXPORT AACI_IRQHandler [WEAK]
+ EXPORT CLCD_IRQHandler [WEAK]
+ EXPORT ENET_IRQHandler [WEAK]
+ EXPORT USBDC_IRQHandler [WEAK]
+ EXPORT USBHC_IRQHandler [WEAK]
+ EXPORT CHLCD_IRQHandler [WEAK]
+ EXPORT FLEXRAY_IRQHandler [WEAK]
+ EXPORT CAN_IRQHandler [WEAK]
+ EXPORT LIN_IRQHandler [WEAK]
+ EXPORT I2C_IRQHandler [WEAK]
+ EXPORT CPU_CLCD_IRQHandler [WEAK]
+ EXPORT SPI_IRQHandler [WEAK]
+
+WDT_IRQHandler
+RTC_IRQHandler
+TIM0_IRQHandler
+TIM2_IRQHandler
+MCIA_IRQHandler
+MCIB_IRQHandler
+UART0_IRQHandler
+UART1_IRQHandler
+UART2_IRQHandler
+UART3_IRQHandler
+UART4_IRQHandler
+AACI_IRQHandler
+CLCD_IRQHandler
+ENET_IRQHandler
+USBDC_IRQHandler
+USBHC_IRQHandler
+CHLCD_IRQHandler
+FLEXRAY_IRQHandler
+CAN_IRQHandler
+LIN_IRQHandler
+I2C_IRQHandler
+CPU_CLCD_IRQHandler
+SPI_IRQHandler
+ B .
+
+ ENDP
+
+
+ ALIGN
+
+
+; User Initial Stack & Heap
+
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap PROC
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+ ENDP
+
+ ALIGN
+
+ ENDIF
+
+
+ END
diff --git a/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM3/system_ARMCM3.c b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM3/system_ARMCM3.c
new file mode 100644
index 0000000..f08df7a
--- /dev/null
+++ b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM3/system_ARMCM3.c
@@ -0,0 +1,68 @@
+/**************************************************************************//**
+ * @file system_ARMCM3.c
+ * @brief CMSIS Device System Source File for
+ * ARMCM3 Device Series
+ * @version V5.00
+ * @date 08. April 2016
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "ARMCM3.h"
+
+/*----------------------------------------------------------------------------
+ Define clocks
+ *----------------------------------------------------------------------------*/
+#define XTAL ( 5000000U) /* Oscillator frequency */
+
+#define SYSTEM_CLOCK (5 * XTAL)
+
+
+/*----------------------------------------------------------------------------
+ Externals
+ *----------------------------------------------------------------------------*/
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
+ extern uint32_t __Vectors;
+#endif
+
+/*----------------------------------------------------------------------------
+ System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;
+
+
+/*----------------------------------------------------------------------------
+ System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+ SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+ System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
+ SCB->VTOR = (uint32_t) &__Vectors;
+#endif
+
+ SystemCoreClock = SYSTEM_CLOCK;
+}
diff --git a/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4/startup_ARMCM4.s b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4/startup_ARMCM4.s
new file mode 100644
index 0000000..dae6439
--- /dev/null
+++ b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4/startup_ARMCM4.s
@@ -0,0 +1,262 @@
+;/**************************************************************************//**
+; * @file startup_ARMCM4.s
+; * @brief CMSIS Core Device Startup File for
+; * ARMCM4 Device Series
+; * @version V5.00
+; * @date 02. March 2016
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;/*
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+;*/
+
+
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000C00
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WDT_IRQHandler ; 0: Watchdog Timer
+ DCD RTC_IRQHandler ; 1: Real Time Clock
+ DCD TIM0_IRQHandler ; 2: Timer0 / Timer1
+ DCD TIM2_IRQHandler ; 3: Timer2 / Timer3
+ DCD MCIA_IRQHandler ; 4: MCIa
+ DCD MCIB_IRQHandler ; 5: MCIb
+ DCD UART0_IRQHandler ; 6: UART0 - DUT FPGA
+ DCD UART1_IRQHandler ; 7: UART1 - DUT FPGA
+ DCD UART2_IRQHandler ; 8: UART2 - DUT FPGA
+ DCD UART4_IRQHandler ; 9: UART4 - not connected
+ DCD AACI_IRQHandler ; 10: AACI / AC97
+ DCD CLCD_IRQHandler ; 11: CLCD Combined Interrupt
+ DCD ENET_IRQHandler ; 12: Ethernet
+ DCD USBDC_IRQHandler ; 13: USB Device
+ DCD USBHC_IRQHandler ; 14: USB Host Controller
+ DCD CHLCD_IRQHandler ; 15: Character LCD
+ DCD FLEXRAY_IRQHandler ; 16: Flexray
+ DCD CAN_IRQHandler ; 17: CAN
+ DCD LIN_IRQHandler ; 18: LIN
+ DCD I2C_IRQHandler ; 19: I2C ADC/DAC
+ DCD 0 ; 20: Reserved
+ DCD 0 ; 21: Reserved
+ DCD 0 ; 22: Reserved
+ DCD 0 ; 23: Reserved
+ DCD 0 ; 24: Reserved
+ DCD 0 ; 25: Reserved
+ DCD 0 ; 26: Reserved
+ DCD 0 ; 27: Reserved
+ DCD CPU_CLCD_IRQHandler ; 28: Reserved - CPU FPGA CLCD
+ DCD 0 ; 29: Reserved - CPU FPGA
+ DCD UART3_IRQHandler ; 30: UART3 - CPU FPGA
+ DCD SPI_IRQHandler ; 31: SPI Touchscreen - CPU FPGA
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+
+; Reset Handler
+
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT SystemInit
+ IMPORT __main
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+MemManage_Handler\
+ PROC
+ EXPORT MemManage_Handler [WEAK]
+ B .
+ ENDP
+BusFault_Handler\
+ PROC
+ EXPORT BusFault_Handler [WEAK]
+ B .
+ ENDP
+UsageFault_Handler\
+ PROC
+ EXPORT UsageFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+DebugMon_Handler\
+ PROC
+ EXPORT DebugMon_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WDT_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT TIM0_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT MCIA_IRQHandler [WEAK]
+ EXPORT MCIB_IRQHandler [WEAK]
+ EXPORT UART0_IRQHandler [WEAK]
+ EXPORT UART1_IRQHandler [WEAK]
+ EXPORT UART2_IRQHandler [WEAK]
+ EXPORT UART3_IRQHandler [WEAK]
+ EXPORT UART4_IRQHandler [WEAK]
+ EXPORT AACI_IRQHandler [WEAK]
+ EXPORT CLCD_IRQHandler [WEAK]
+ EXPORT ENET_IRQHandler [WEAK]
+ EXPORT USBDC_IRQHandler [WEAK]
+ EXPORT USBHC_IRQHandler [WEAK]
+ EXPORT CHLCD_IRQHandler [WEAK]
+ EXPORT FLEXRAY_IRQHandler [WEAK]
+ EXPORT CAN_IRQHandler [WEAK]
+ EXPORT LIN_IRQHandler [WEAK]
+ EXPORT I2C_IRQHandler [WEAK]
+ EXPORT CPU_CLCD_IRQHandler [WEAK]
+ EXPORT SPI_IRQHandler [WEAK]
+
+WDT_IRQHandler
+RTC_IRQHandler
+TIM0_IRQHandler
+TIM2_IRQHandler
+MCIA_IRQHandler
+MCIB_IRQHandler
+UART0_IRQHandler
+UART1_IRQHandler
+UART2_IRQHandler
+UART3_IRQHandler
+UART4_IRQHandler
+AACI_IRQHandler
+CLCD_IRQHandler
+ENET_IRQHandler
+USBDC_IRQHandler
+USBHC_IRQHandler
+CHLCD_IRQHandler
+FLEXRAY_IRQHandler
+CAN_IRQHandler
+LIN_IRQHandler
+I2C_IRQHandler
+CPU_CLCD_IRQHandler
+SPI_IRQHandler
+ B .
+
+ ENDP
+
+
+ ALIGN
+
+
+; User Initial Stack & Heap
+
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap PROC
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+ ENDP
+
+ ALIGN
+
+ ENDIF
+
+
+ END
diff --git a/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4/system_ARMCM4.c b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4/system_ARMCM4.c
new file mode 100644
index 0000000..af23005
--- /dev/null
+++ b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4/system_ARMCM4.c
@@ -0,0 +1,83 @@
+/**************************************************************************//**
+ * @file system_ARMCM4.c
+ * @brief CMSIS Device System Source File for
+ * ARMCM4 Device Series
+ * @version V5.00
+ * @date 07. September 2016
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if defined (ARMCM4)
+ #include "ARMCM4.h"
+#elif defined (ARMCM4_FP)
+ #include "ARMCM4_FP.h"
+#else
+ #error device not specified!
+#endif
+
+/*----------------------------------------------------------------------------
+ Define clocks
+ *----------------------------------------------------------------------------*/
+#define XTAL ( 5000000UL) /* Oscillator frequency */
+
+#define SYSTEM_CLOCK (5U * XTAL)
+
+
+/*----------------------------------------------------------------------------
+ Externals
+ *----------------------------------------------------------------------------*/
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+ extern uint32_t __Vectors;
+#endif
+
+/*----------------------------------------------------------------------------
+ System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;
+
+
+/*----------------------------------------------------------------------------
+ System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+ SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+ System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+ SCB->VTOR = (uint32_t) &__Vectors;
+#endif
+
+#if defined (__FPU_USED) && (__FPU_USED == 1U)
+ SCB->CPACR |= ((3U << 10U*2U) | /* set CP10 Full Access */
+ (3U << 11U*2U) ); /* set CP11 Full Access */
+#endif
+
+#ifdef UNALIGNED_SUPPORT_DISABLE
+ SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk;
+#endif
+
+ SystemCoreClock = SYSTEM_CLOCK;
+}
diff --git a/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4_FP/startup_ARMCM4.s b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4_FP/startup_ARMCM4.s
new file mode 100644
index 0000000..116c5cb
--- /dev/null
+++ b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4_FP/startup_ARMCM4.s
@@ -0,0 +1,262 @@
+;/**************************************************************************//**
+; * @file startup_ARMCM4.s
+; * @brief CMSIS Core Device Startup File for
+; * ARMCM4 Device Series
+; * @version V5.00
+; * @date 02. March 2016
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;/*
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+;*/
+
+
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00004000
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00100000
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WDT_IRQHandler ; 0: Watchdog Timer
+ DCD RTC_IRQHandler ; 1: Real Time Clock
+ DCD TIM0_IRQHandler ; 2: Timer0 / Timer1
+ DCD TIM2_IRQHandler ; 3: Timer2 / Timer3
+ DCD MCIA_IRQHandler ; 4: MCIa
+ DCD MCIB_IRQHandler ; 5: MCIb
+ DCD UART0_IRQHandler ; 6: UART0 - DUT FPGA
+ DCD UART1_IRQHandler ; 7: UART1 - DUT FPGA
+ DCD UART2_IRQHandler ; 8: UART2 - DUT FPGA
+ DCD UART4_IRQHandler ; 9: UART4 - not connected
+ DCD AACI_IRQHandler ; 10: AACI / AC97
+ DCD CLCD_IRQHandler ; 11: CLCD Combined Interrupt
+ DCD ENET_IRQHandler ; 12: Ethernet
+ DCD USBDC_IRQHandler ; 13: USB Device
+ DCD USBHC_IRQHandler ; 14: USB Host Controller
+ DCD CHLCD_IRQHandler ; 15: Character LCD
+ DCD FLEXRAY_IRQHandler ; 16: Flexray
+ DCD CAN_IRQHandler ; 17: CAN
+ DCD LIN_IRQHandler ; 18: LIN
+ DCD I2C_IRQHandler ; 19: I2C ADC/DAC
+ DCD 0 ; 20: Reserved
+ DCD 0 ; 21: Reserved
+ DCD 0 ; 22: Reserved
+ DCD 0 ; 23: Reserved
+ DCD 0 ; 24: Reserved
+ DCD 0 ; 25: Reserved
+ DCD 0 ; 26: Reserved
+ DCD 0 ; 27: Reserved
+ DCD CPU_CLCD_IRQHandler ; 28: Reserved - CPU FPGA CLCD
+ DCD 0 ; 29: Reserved - CPU FPGA
+ DCD UART3_IRQHandler ; 30: UART3 - CPU FPGA
+ DCD SPI_IRQHandler ; 31: SPI Touchscreen - CPU FPGA
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+
+; Reset Handler
+
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT SystemInit
+ IMPORT __main
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+MemManage_Handler\
+ PROC
+ EXPORT MemManage_Handler [WEAK]
+ B .
+ ENDP
+BusFault_Handler\
+ PROC
+ EXPORT BusFault_Handler [WEAK]
+ B .
+ ENDP
+UsageFault_Handler\
+ PROC
+ EXPORT UsageFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+DebugMon_Handler\
+ PROC
+ EXPORT DebugMon_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WDT_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT TIM0_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT MCIA_IRQHandler [WEAK]
+ EXPORT MCIB_IRQHandler [WEAK]
+ EXPORT UART0_IRQHandler [WEAK]
+ EXPORT UART1_IRQHandler [WEAK]
+ EXPORT UART2_IRQHandler [WEAK]
+ EXPORT UART3_IRQHandler [WEAK]
+ EXPORT UART4_IRQHandler [WEAK]
+ EXPORT AACI_IRQHandler [WEAK]
+ EXPORT CLCD_IRQHandler [WEAK]
+ EXPORT ENET_IRQHandler [WEAK]
+ EXPORT USBDC_IRQHandler [WEAK]
+ EXPORT USBHC_IRQHandler [WEAK]
+ EXPORT CHLCD_IRQHandler [WEAK]
+ EXPORT FLEXRAY_IRQHandler [WEAK]
+ EXPORT CAN_IRQHandler [WEAK]
+ EXPORT LIN_IRQHandler [WEAK]
+ EXPORT I2C_IRQHandler [WEAK]
+ EXPORT CPU_CLCD_IRQHandler [WEAK]
+ EXPORT SPI_IRQHandler [WEAK]
+
+WDT_IRQHandler
+RTC_IRQHandler
+TIM0_IRQHandler
+TIM2_IRQHandler
+MCIA_IRQHandler
+MCIB_IRQHandler
+UART0_IRQHandler
+UART1_IRQHandler
+UART2_IRQHandler
+UART3_IRQHandler
+UART4_IRQHandler
+AACI_IRQHandler
+CLCD_IRQHandler
+ENET_IRQHandler
+USBDC_IRQHandler
+USBHC_IRQHandler
+CHLCD_IRQHandler
+FLEXRAY_IRQHandler
+CAN_IRQHandler
+LIN_IRQHandler
+I2C_IRQHandler
+CPU_CLCD_IRQHandler
+SPI_IRQHandler
+ B .
+
+ ENDP
+
+
+ ALIGN
+
+
+; User Initial Stack & Heap
+
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap PROC
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+ ENDP
+
+ ALIGN
+
+ ENDIF
+
+
+ END
diff --git a/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4_FP/system_ARMCM4.c b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4_FP/system_ARMCM4.c
new file mode 100644
index 0000000..070fa1e
--- /dev/null
+++ b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4_FP/system_ARMCM4.c
@@ -0,0 +1,83 @@
+/**************************************************************************//**
+ * @file system_ARMCM4.c
+ * @brief CMSIS Device System Source File for
+ * ARMCM4 Device Series
+ * @version V5.00
+ * @date 08. April 2016
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if defined (ARMCM4)
+ #include "ARMCM4.h"
+#elif defined (ARMCM4_FP)
+ #include "ARMCM4_FP.h"
+#else
+ #error device not specified!
+#endif
+
+/*----------------------------------------------------------------------------
+ Define clocks
+ *----------------------------------------------------------------------------*/
+#define XTAL ( 5000000U) /* Oscillator frequency */
+
+#define SYSTEM_CLOCK (5 * XTAL)
+
+
+/*----------------------------------------------------------------------------
+ Externals
+ *----------------------------------------------------------------------------*/
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
+ extern uint32_t __Vectors;
+#endif
+
+/*----------------------------------------------------------------------------
+ System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;
+
+
+/*----------------------------------------------------------------------------
+ System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+ SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+ System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
+ SCB->VTOR = (uint32_t) &__Vectors;
+#endif
+
+#if defined (__FPU_USED) && (__FPU_USED == 1)
+ SCB->CPACR |= ((3U << 10*2) | /* set CP10 Full Access */
+ (3U << 11*2) ); /* set CP11 Full Access */
+#endif
+
+#ifdef UNALIGNED_SUPPORT_DISABLE
+ SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk;
+#endif
+
+ SystemCoreClock = SYSTEM_CLOCK;
+}
diff --git a/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM7_SP/gcc_arm.ld b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM7_SP/gcc_arm.ld
new file mode 100644
index 0000000..b987fd1
--- /dev/null
+++ b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM7_SP/gcc_arm.ld
@@ -0,0 +1,196 @@
+/* Linker script to configure memory regions. */
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 512K
+ RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 256K
+}
+
+/* Library configurations */
+GROUP(libgcc.a libc.a libm.a libnosys.a)
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ * Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __copy_table_start__
+ * __copy_table_end__
+ * __zero_table_start__
+ * __zero_table_end__
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapBase
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ * __Vectors_End
+ * __Vectors_Size
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .text :
+ {
+ KEEP(*(.vectors))
+ __Vectors_End = .;
+ __Vectors_Size = __Vectors_End - __Vectors;
+ __end__ = .;
+
+ *(.text*)
+
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ *(.rodata*)
+
+ KEEP(*(.eh_frame*))
+ } > FLASH
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > FLASH
+
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > FLASH
+ __exidx_end = .;
+
+ /* To copy multiple ROM to RAM sections,
+ * uncomment .copy.table section and,
+ * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */
+ /*
+ .copy.table :
+ {
+ . = ALIGN(4);
+ __copy_table_start__ = .;
+ LONG (__etext)
+ LONG (__data_start__)
+ LONG (__data_end__ - __data_start__)
+ LONG (__etext2)
+ LONG (__data2_start__)
+ LONG (__data2_end__ - __data2_start__)
+ __copy_table_end__ = .;
+ } > FLASH
+ */
+
+ /* To clear multiple BSS sections,
+ * uncomment .zero.table section and,
+ * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */
+ /*
+ .zero.table :
+ {
+ . = ALIGN(4);
+ __zero_table_start__ = .;
+ LONG (__bss_start__)
+ LONG (__bss_end__ - __bss_start__)
+ LONG (__bss2_start__)
+ LONG (__bss2_end__ - __bss2_start__)
+ __zero_table_end__ = .;
+ } > FLASH
+ */
+
+ __etext = .;
+
+ .data : AT (__etext)
+ {
+ __data_start__ = .;
+ *(vtable)
+ *(.data*)
+
+ . = ALIGN(4);
+ /* preinit data */
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+
+ . = ALIGN(4);
+ /* init data */
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE_HIDDEN (__init_array_end = .);
+
+
+ . = ALIGN(4);
+ /* finit data */
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+
+ KEEP(*(.jcr*))
+ . = ALIGN(4);
+ /* All data end */
+ __data_end__ = .;
+
+ } > RAM
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start__ = .;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ } > RAM
+
+ .heap (COPY):
+ {
+ __HeapBase = .;
+ __end__ = .;
+ end = __end__;
+ KEEP(*(.heap*))
+ __HeapLimit = .;
+ } > RAM
+
+ /* .stack_dummy section doesn't contains any symbols. It is only
+ * used for linker to calculate size of stack sections, and assign
+ * values to stack symbols later */
+ .stack_dummy (COPY):
+ {
+ KEEP(*(.stack*))
+ } > RAM
+
+ /* Set stack top to end of RAM, and stack limit move down by
+ * size of stack_dummy section */
+ __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+ __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+ PROVIDE(__stack = __StackTop);
+
+ /* Check if data + heap + stack exceeds RAM limit */
+ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
diff --git a/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM7_SP/startup_ARMCM7.c b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM7_SP/startup_ARMCM7.c
new file mode 100644
index 0000000..26edb9f
--- /dev/null
+++ b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM7_SP/startup_ARMCM7.c
@@ -0,0 +1,295 @@
+/**************************************************************************//**
+ * @file startup_ARMCM7.s
+ * @brief CMSIS Core Device Startup File for
+ * ARMCM7 Device Series
+ * @version V5.00
+ * @date 26. April 2016
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <stdint.h>
+
+
+/*----------------------------------------------------------------------------
+ Linker generated Symbols
+ *----------------------------------------------------------------------------*/
+extern uint32_t __etext;
+extern uint32_t __data_start__;
+extern uint32_t __data_end__;
+extern uint32_t __copy_table_start__;
+extern uint32_t __copy_table_end__;
+extern uint32_t __zero_table_start__;
+extern uint32_t __zero_table_end__;
+extern uint32_t __bss_start__;
+extern uint32_t __bss_end__;
+extern uint32_t __StackTop;
+
+/*----------------------------------------------------------------------------
+ Exception / Interrupt Handler Function Prototype
+ *----------------------------------------------------------------------------*/
+typedef void( *pFunc )( void );
+
+
+/*----------------------------------------------------------------------------
+ External References
+ *----------------------------------------------------------------------------*/
+#ifndef __START
+extern void _start(void) __attribute__((noreturn)); /* PreeMain (C library entry point) */
+#else
+extern int __START(void) __attribute__((noreturn)); /* main entry point */
+#endif
+
+#ifndef __NO_SYSTEM_INIT
+extern void SystemInit (void); /* CMSIS System Initialization */
+#endif
+
+
+/*----------------------------------------------------------------------------
+ Internal References
+ *----------------------------------------------------------------------------*/
+void Default_Handler(void); /* Default empty handler */
+void Reset_Handler(void); /* Reset Handler */
+
+
+/*----------------------------------------------------------------------------
+ User Initial Stack & Heap
+ *----------------------------------------------------------------------------*/
+#ifndef __STACK_SIZE
+ #define __STACK_SIZE 0x00000400
+#endif
+static uint8_t stack[__STACK_SIZE] __attribute__ ((aligned(8), used, section(".stack")));
+
+#ifndef __HEAP_SIZE
+ #define __HEAP_SIZE 0x00000C00
+#endif
+#if __HEAP_SIZE > 0
+static uint8_t heap[__HEAP_SIZE] __attribute__ ((aligned(8), used, section(".heap")));
+#endif
+
+
+/*----------------------------------------------------------------------------
+ Exception / Interrupt Handler
+ *----------------------------------------------------------------------------*/
+/* Cortex-M7 Processor Exceptions */
+void NMI_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
+void HardFault_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
+void MemManage_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
+void BusFault_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
+void UsageFault_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
+void SVC_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
+void DebugMon_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
+void PendSV_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
+void SysTick_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
+
+/* ARMCM7 Specific Interrupts */
+void WDT_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void RTC_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void TIM0_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void TIM2_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void MCIA_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void MCIB_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void UART0_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void UART1_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void UART2_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void UART4_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void AACI_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void CLCD_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void ENET_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void USBDC_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void USBHC_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void CHLCD_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void FLEXRAY_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void CAN_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void LIN_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void I2C_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void CPU_CLCD_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void UART3_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void SPI_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+
+
+/*----------------------------------------------------------------------------
+ Exception / Interrupt Vector table
+ *----------------------------------------------------------------------------*/
+const pFunc __Vectors[] __attribute__ ((section(".vectors"))) = {
+ /* Cortex-M7 Exceptions Handler */
+ (pFunc)((uint32_t)&__StackTop), /* Initial Stack Pointer */
+ Reset_Handler, /* Reset Handler */
+ NMI_Handler, /* NMI Handler */
+ HardFault_Handler, /* Hard Fault Handler */
+ MemManage_Handler, /* MPU Fault Handler */
+ BusFault_Handler, /* Bus Fault Handler */
+ UsageFault_Handler, /* Usage Fault Handler */
+ 0, /* Reserved */
+ 0, /* Reserved */
+ 0, /* Reserved */
+ 0, /* Reserved */
+ SVC_Handler, /* SVCall Handler */
+ DebugMon_Handler, /* Debug Monitor Handler */
+ 0, /* Reserved */
+ PendSV_Handler, /* PendSV Handler */
+ SysTick_Handler, /* SysTick Handler */
+
+ /* External interrupts */
+ WDT_IRQHandler, /* 0: Watchdog Timer */
+ RTC_IRQHandler, /* 1: Real Time Clock */
+ TIM0_IRQHandler, /* 2: Timer0 / Timer1 */
+ TIM2_IRQHandler, /* 3: Timer2 / Timer3 */
+ MCIA_IRQHandler, /* 4: MCIa */
+ MCIB_IRQHandler, /* 5: MCIb */
+ UART0_IRQHandler, /* 6: UART0 - DUT FPGA */
+ UART1_IRQHandler, /* 7: UART1 - DUT FPGA */
+ UART2_IRQHandler, /* 8: UART2 - DUT FPGA */
+ UART4_IRQHandler, /* 9: UART4 - not connected */
+ AACI_IRQHandler, /* 10: AACI / AC97 */
+ CLCD_IRQHandler, /* 11: CLCD Combined Interrupt */
+ ENET_IRQHandler, /* 12: Ethernet */
+ USBDC_IRQHandler, /* 13: USB Device */
+ USBHC_IRQHandler, /* 14: USB Host Controller */
+ CHLCD_IRQHandler, /* 15: Character LCD */
+ FLEXRAY_IRQHandler, /* 16: Flexray */
+ CAN_IRQHandler, /* 17: CAN */
+ LIN_IRQHandler, /* 18: LIN */
+ I2C_IRQHandler, /* 19: I2C ADC/DAC */
+ 0, /* 20: Reserved */
+ 0, /* 21: Reserved */
+ 0, /* 22: Reserved */
+ 0, /* 23: Reserved */
+ 0, /* 24: Reserved */
+ 0, /* 25: Reserved */
+ 0, /* 26: Reserved */
+ 0, /* 27: Reserved */
+ CPU_CLCD_IRQHandler, /* 28: Reserved - CPU FPGA CLCD */
+ 0, /* 29: Reserved - CPU FPGA */
+ UART3_IRQHandler, /* 30: UART3 - CPU FPGA */
+ SPI_IRQHandler /* 31: SPI Touchscreen - CPU FPGA */
+};
+
+
+/*----------------------------------------------------------------------------
+ Reset Handler called on controller reset
+ *----------------------------------------------------------------------------*/
+void Reset_Handler(void) {
+ uint32_t *pSrc, *pDest;
+ uint32_t *pTable __attribute__((unused));
+
+/* Firstly it copies data from read only memory to RAM. There are two schemes
+ * to copy. One can copy more than one sections. Another can only copy
+ * one section. The former scheme needs more instructions and read-only
+ * data to implement than the latter.
+ * Macro __STARTUP_COPY_MULTIPLE is used to choose between two schemes. */
+
+#ifdef __STARTUP_COPY_MULTIPLE
+/* Multiple sections scheme.
+ *
+ * Between symbol address __copy_table_start__ and __copy_table_end__,
+ * there are array of triplets, each of which specify:
+ * offset 0: LMA of start of a section to copy from
+ * offset 4: VMA of start of a section to copy to
+ * offset 8: size of the section to copy. Must be multiply of 4
+ *
+ * All addresses must be aligned to 4 bytes boundary.
+ */
+ pTable = &__copy_table_start__;
+
+ for (; pTable < &__copy_table_end__; pTable = pTable + 3) {
+ pSrc = (uint32_t*)*(pTable + 0);
+ pDest = (uint32_t*)*(pTable + 1);
+ for (; pDest < (uint32_t*)(*(pTable + 1) + *(pTable + 2)) ; ) {
+ *pDest++ = *pSrc++;
+ }
+ }
+#else
+/* Single section scheme.
+ *
+ * The ranges of copy from/to are specified by following symbols
+ * __etext: LMA of start of the section to copy from. Usually end of text
+ * __data_start__: VMA of start of the section to copy to
+ * __data_end__: VMA of end of the section to copy to
+ *
+ * All addresses must be aligned to 4 bytes boundary.
+ */
+ pSrc = &__etext;
+ pDest = &__data_start__;
+
+ for ( ; pDest < &__data_end__ ; ) {
+ *pDest++ = *pSrc++;
+ }
+#endif /*__STARTUP_COPY_MULTIPLE */
+
+/* This part of work usually is done in C library startup code. Otherwise,
+ * define this macro to enable it in this startup.
+ *
+ * There are two schemes too. One can clear multiple BSS sections. Another
+ * can only clear one section. The former is more size expensive than the
+ * latter.
+ *
+ * Define macro __STARTUP_CLEAR_BSS_MULTIPLE to choose the former.
+ * Otherwise efine macro __STARTUP_CLEAR_BSS to choose the later.
+ */
+#ifdef __STARTUP_CLEAR_BSS_MULTIPLE
+/* Multiple sections scheme.
+ *
+ * Between symbol address __copy_table_start__ and __copy_table_end__,
+ * there are array of tuples specifying:
+ * offset 0: Start of a BSS section
+ * offset 4: Size of this BSS section. Must be multiply of 4
+ */
+ pTable = &__zero_table_start__;
+
+ for (; pTable < &__zero_table_end__; pTable = pTable + 2) {
+ pDest = (uint32_t*)*(pTable + 0);
+ for (; pDest < (uint32_t*)(*(pTable + 0) + *(pTable + 1)) ; ) {
+ *pDest++ = 0;
+ }
+ }
+#elif defined (__STARTUP_CLEAR_BSS)
+/* Single BSS section scheme.
+ *
+ * The BSS section is specified by following symbols
+ * __bss_start__: start of the BSS section.
+ * __bss_end__: end of the BSS section.
+ *
+ * Both addresses must be aligned to 4 bytes boundary.
+ */
+ pDest = &__bss_start__;
+
+ for ( ; pDest < &__bss_end__ ; ) {
+ *pDest++ = 0UL;
+ }
+#endif /* __STARTUP_CLEAR_BSS_MULTIPLE || __STARTUP_CLEAR_BSS */
+
+#ifndef __NO_SYSTEM_INIT
+ SystemInit();
+#endif
+
+#ifndef __START
+#define __START _start
+#endif
+ __START();
+
+}
+
+
+/*----------------------------------------------------------------------------
+ Default Handler for Exceptions / Interrupts
+ *----------------------------------------------------------------------------*/
+void Default_Handler(void) {
+
+ while(1);
+}
diff --git a/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM7_SP/startup_ARMCM7.s b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM7_SP/startup_ARMCM7.s
new file mode 100644
index 0000000..0170ef4
--- /dev/null
+++ b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM7_SP/startup_ARMCM7.s
@@ -0,0 +1,262 @@
+;/**************************************************************************//**
+; * @file startup_ARMCM7.s
+; * @brief CMSIS Core Device Startup File for
+; * ARMCM7 Device Series
+; * @version V5.00
+; * @date 02. March 2016
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;/*
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+;*/
+
+
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00080000
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WDT_IRQHandler ; 0: Watchdog Timer
+ DCD RTC_IRQHandler ; 1: Real Time Clock
+ DCD TIM0_IRQHandler ; 2: Timer0 / Timer1
+ DCD TIM2_IRQHandler ; 3: Timer2 / Timer3
+ DCD MCIA_IRQHandler ; 4: MCIa
+ DCD MCIB_IRQHandler ; 5: MCIb
+ DCD UART0_IRQHandler ; 6: UART0 - DUT FPGA
+ DCD UART1_IRQHandler ; 7: UART1 - DUT FPGA
+ DCD UART2_IRQHandler ; 8: UART2 - DUT FPGA
+ DCD UART4_IRQHandler ; 9: UART4 - not connected
+ DCD AACI_IRQHandler ; 10: AACI / AC97
+ DCD CLCD_IRQHandler ; 11: CLCD Combined Interrupt
+ DCD ENET_IRQHandler ; 12: Ethernet
+ DCD USBDC_IRQHandler ; 13: USB Device
+ DCD USBHC_IRQHandler ; 14: USB Host Controller
+ DCD CHLCD_IRQHandler ; 15: Character LCD
+ DCD FLEXRAY_IRQHandler ; 16: Flexray
+ DCD CAN_IRQHandler ; 17: CAN
+ DCD LIN_IRQHandler ; 18: LIN
+ DCD I2C_IRQHandler ; 19: I2C ADC/DAC
+ DCD 0 ; 20: Reserved
+ DCD 0 ; 21: Reserved
+ DCD 0 ; 22: Reserved
+ DCD 0 ; 23: Reserved
+ DCD 0 ; 24: Reserved
+ DCD 0 ; 25: Reserved
+ DCD 0 ; 26: Reserved
+ DCD 0 ; 27: Reserved
+ DCD CPU_CLCD_IRQHandler ; 28: Reserved - CPU FPGA CLCD
+ DCD 0 ; 29: Reserved - CPU FPGA
+ DCD UART3_IRQHandler ; 30: UART3 - CPU FPGA
+ DCD SPI_IRQHandler ; 31: SPI Touchscreen - CPU FPGA
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+
+; Reset Handler
+
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT SystemInit
+ IMPORT __main
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+MemManage_Handler\
+ PROC
+ EXPORT MemManage_Handler [WEAK]
+ B .
+ ENDP
+BusFault_Handler\
+ PROC
+ EXPORT BusFault_Handler [WEAK]
+ B .
+ ENDP
+UsageFault_Handler\
+ PROC
+ EXPORT UsageFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+DebugMon_Handler\
+ PROC
+ EXPORT DebugMon_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WDT_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT TIM0_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT MCIA_IRQHandler [WEAK]
+ EXPORT MCIB_IRQHandler [WEAK]
+ EXPORT UART0_IRQHandler [WEAK]
+ EXPORT UART1_IRQHandler [WEAK]
+ EXPORT UART2_IRQHandler [WEAK]
+ EXPORT UART3_IRQHandler [WEAK]
+ EXPORT UART4_IRQHandler [WEAK]
+ EXPORT AACI_IRQHandler [WEAK]
+ EXPORT CLCD_IRQHandler [WEAK]
+ EXPORT ENET_IRQHandler [WEAK]
+ EXPORT USBDC_IRQHandler [WEAK]
+ EXPORT USBHC_IRQHandler [WEAK]
+ EXPORT CHLCD_IRQHandler [WEAK]
+ EXPORT FLEXRAY_IRQHandler [WEAK]
+ EXPORT CAN_IRQHandler [WEAK]
+ EXPORT LIN_IRQHandler [WEAK]
+ EXPORT I2C_IRQHandler [WEAK]
+ EXPORT CPU_CLCD_IRQHandler [WEAK]
+ EXPORT SPI_IRQHandler [WEAK]
+
+WDT_IRQHandler
+RTC_IRQHandler
+TIM0_IRQHandler
+TIM2_IRQHandler
+MCIA_IRQHandler
+MCIB_IRQHandler
+UART0_IRQHandler
+UART1_IRQHandler
+UART2_IRQHandler
+UART3_IRQHandler
+UART4_IRQHandler
+AACI_IRQHandler
+CLCD_IRQHandler
+ENET_IRQHandler
+USBDC_IRQHandler
+USBHC_IRQHandler
+CHLCD_IRQHandler
+FLEXRAY_IRQHandler
+CAN_IRQHandler
+LIN_IRQHandler
+I2C_IRQHandler
+CPU_CLCD_IRQHandler
+SPI_IRQHandler
+ B .
+
+ ENDP
+
+
+ ALIGN
+
+
+; User Initial Stack & Heap
+
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap PROC
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+ ENDP
+
+ ALIGN
+
+ ENDIF
+
+
+ END
diff --git a/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM7_SP/system_ARMCM7.c b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM7_SP/system_ARMCM7.c
new file mode 100644
index 0000000..65bfaca
--- /dev/null
+++ b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM7_SP/system_ARMCM7.c
@@ -0,0 +1,85 @@
+/**************************************************************************//**
+ * @file system_ARMCM7.c
+ * @brief CMSIS Device System Source File for
+ * ARMCM7 Device Series
+ * @version V5.00
+ * @date 08. April 2016
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if defined (ARMCM7)
+ #include "ARMCM7.h"
+#elif defined (ARMCM7_SP)
+ #include "ARMCM7_SP.h"
+#elif defined (ARMCM7_DP)
+ #include "ARMCM7_DP.h"
+#else
+ #error device not specified!
+#endif
+
+/*----------------------------------------------------------------------------
+ Define clocks
+ *----------------------------------------------------------------------------*/
+#define XTAL ( 5000000U) /* Oscillator frequency */
+
+#define SYSTEM_CLOCK (5 * XTAL)
+
+
+/*----------------------------------------------------------------------------
+ Externals
+ *----------------------------------------------------------------------------*/
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
+ extern uint32_t __Vectors;
+#endif
+
+/*----------------------------------------------------------------------------
+ System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;
+
+
+/*----------------------------------------------------------------------------
+ System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+ SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+ System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
+ SCB->VTOR = (uint32_t) &__Vectors;
+#endif
+
+#if defined (__FPU_USED) && (__FPU_USED == 1)
+ SCB->CPACR |= ((3U << 10*2) | /* set CP10 Full Access */
+ (3U << 11*2) ); /* set CP11 Full Access */
+#endif
+
+#ifdef UNALIGNED_SUPPORT_DISABLE
+ SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk;
+#endif
+
+ SystemCoreClock = SYSTEM_CLOCK;
+}
diff --git a/NN/NN_Lib_Tests/nn_test/RTE/Device/STM32F411RETx/startup_stm32f411xe.s b/NN/NN_Lib_Tests/nn_test/RTE/Device/STM32F411RETx/startup_stm32f411xe.s
new file mode 100644
index 0000000..9b70614
--- /dev/null
+++ b/NN/NN_Lib_Tests/nn_test/RTE/Device/STM32F411RETx/startup_stm32f411xe.s
@@ -0,0 +1,395 @@
+;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;* File Name : startup_stm32f411xe.s
+;* Author : MCD Application Team
+;* Version : V2.6.0
+;* Date : 04-November-2016
+;* Description : STM32F411xExx devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM4 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>
+;*******************************************************************************
+;
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;* 1. Redistributions of source code must retain the above copyright notice,
+;* this list of conditions and the following disclaimer.
+;* 2. Redistributions in binary form must reproduce the above copyright notice,
+;* this list of conditions and the following disclaimer in the documentation
+;* and/or other materials provided with the distribution.
+;* 3. Neither the name of STMicroelectronics nor the names of its contributors
+;* may be used to endorse or promote products derived from this software
+;* without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window WatchDog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detection
+ DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
+ DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line0
+ DCD EXTI1_IRQHandler ; EXTI Line1
+ DCD EXTI2_IRQHandler ; EXTI Line2
+ DCD EXTI3_IRQHandler ; EXTI Line3
+ DCD EXTI4_IRQHandler ; EXTI Line4
+ DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0
+ DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1
+ DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2
+ DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3
+ DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4
+ DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5
+ DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6
+ DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD EXTI9_5_IRQHandler ; External Line[9:5]s
+ DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9
+ DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10
+ DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM4_IRQHandler ; TIM4
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD I2C2_EV_IRQHandler ; I2C2 Event
+ DCD I2C2_ER_IRQHandler ; I2C2 Error
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD 0 ; Reserved
+ DCD EXTI15_10_IRQHandler ; External Line[15:10]s
+ DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
+ DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7
+ DCD 0 ; Reserved
+ DCD SDIO_IRQHandler ; SDIO
+ DCD TIM5_IRQHandler ; TIM5
+ DCD SPI3_IRQHandler ; SPI3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0
+ DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1
+ DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2
+ DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3
+ DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD OTG_FS_IRQHandler ; USB OTG FS
+ DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5
+ DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6
+ DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7
+ DCD USART6_IRQHandler ; USART6
+ DCD I2C3_EV_IRQHandler ; I2C3 event
+ DCD I2C3_ER_IRQHandler ; I2C3 error
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD FPU_IRQHandler ; FPU
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SPI4_IRQHandler ; SPI4
+ DCD SPI5_IRQHandler ; SPI5
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT SystemInit
+ IMPORT __main
+
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+MemManage_Handler\
+ PROC
+ EXPORT MemManage_Handler [WEAK]
+ B .
+ ENDP
+BusFault_Handler\
+ PROC
+ EXPORT BusFault_Handler [WEAK]
+ B .
+ ENDP
+UsageFault_Handler\
+ PROC
+ EXPORT UsageFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+DebugMon_Handler\
+ PROC
+ EXPORT DebugMon_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_IRQHandler [WEAK]
+ EXPORT TAMP_STAMP_IRQHandler [WEAK]
+ EXPORT RTC_WKUP_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_IRQHandler [WEAK]
+ EXPORT EXTI1_IRQHandler [WEAK]
+ EXPORT EXTI2_IRQHandler [WEAK]
+ EXPORT EXTI3_IRQHandler [WEAK]
+ EXPORT EXTI4_IRQHandler [WEAK]
+ EXPORT DMA1_Stream0_IRQHandler [WEAK]
+ EXPORT DMA1_Stream1_IRQHandler [WEAK]
+ EXPORT DMA1_Stream2_IRQHandler [WEAK]
+ EXPORT DMA1_Stream3_IRQHandler [WEAK]
+ EXPORT DMA1_Stream4_IRQHandler [WEAK]
+ EXPORT DMA1_Stream5_IRQHandler [WEAK]
+ EXPORT DMA1_Stream6_IRQHandler [WEAK]
+ EXPORT ADC_IRQHandler [WEAK]
+ EXPORT EXTI9_5_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK]
+ EXPORT TIM1_UP_TIM10_IRQHandler [WEAK]
+ EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM4_IRQHandler [WEAK]
+ EXPORT I2C1_EV_IRQHandler [WEAK]
+ EXPORT I2C1_ER_IRQHandler [WEAK]
+ EXPORT I2C2_EV_IRQHandler [WEAK]
+ EXPORT I2C2_ER_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT EXTI15_10_IRQHandler [WEAK]
+ EXPORT RTC_Alarm_IRQHandler [WEAK]
+ EXPORT OTG_FS_WKUP_IRQHandler [WEAK]
+ EXPORT DMA1_Stream7_IRQHandler [WEAK]
+ EXPORT SDIO_IRQHandler [WEAK]
+ EXPORT TIM5_IRQHandler [WEAK]
+ EXPORT SPI3_IRQHandler [WEAK]
+ EXPORT DMA2_Stream0_IRQHandler [WEAK]
+ EXPORT DMA2_Stream1_IRQHandler [WEAK]
+ EXPORT DMA2_Stream2_IRQHandler [WEAK]
+ EXPORT DMA2_Stream3_IRQHandler [WEAK]
+ EXPORT DMA2_Stream4_IRQHandler [WEAK]
+ EXPORT OTG_FS_IRQHandler [WEAK]
+ EXPORT DMA2_Stream5_IRQHandler [WEAK]
+ EXPORT DMA2_Stream6_IRQHandler [WEAK]
+ EXPORT DMA2_Stream7_IRQHandler [WEAK]
+ EXPORT USART6_IRQHandler [WEAK]
+ EXPORT I2C3_EV_IRQHandler [WEAK]
+ EXPORT I2C3_ER_IRQHandler [WEAK]
+ EXPORT FPU_IRQHandler [WEAK]
+ EXPORT SPI4_IRQHandler [WEAK]
+ EXPORT SPI5_IRQHandler [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMP_STAMP_IRQHandler
+RTC_WKUP_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Stream0_IRQHandler
+DMA1_Stream1_IRQHandler
+DMA1_Stream2_IRQHandler
+DMA1_Stream3_IRQHandler
+DMA1_Stream4_IRQHandler
+DMA1_Stream5_IRQHandler
+DMA1_Stream6_IRQHandler
+ADC_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_TIM9_IRQHandler
+TIM1_UP_TIM10_IRQHandler
+TIM1_TRG_COM_TIM11_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+EXTI15_10_IRQHandler
+RTC_Alarm_IRQHandler
+OTG_FS_WKUP_IRQHandler
+DMA1_Stream7_IRQHandler
+SDIO_IRQHandler
+TIM5_IRQHandler
+SPI3_IRQHandler
+DMA2_Stream0_IRQHandler
+DMA2_Stream1_IRQHandler
+DMA2_Stream2_IRQHandler
+DMA2_Stream3_IRQHandler
+DMA2_Stream4_IRQHandler
+OTG_FS_IRQHandler
+DMA2_Stream5_IRQHandler
+DMA2_Stream6_IRQHandler
+DMA2_Stream7_IRQHandler
+USART6_IRQHandler
+I2C3_EV_IRQHandler
+I2C3_ER_IRQHandler
+FPU_IRQHandler
+SPI4_IRQHandler
+SPI5_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/NN/NN_Lib_Tests/nn_test/RTE/Device/STM32F411RETx/system_stm32f4xx.c b/NN/NN_Lib_Tests/nn_test/RTE/Device/STM32F411RETx/system_stm32f4xx.c
new file mode 100644
index 0000000..bca0633
--- /dev/null
+++ b/NN/NN_Lib_Tests/nn_test/RTE/Device/STM32F411RETx/system_stm32f4xx.c
@@ -0,0 +1,763 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f4xx.c
+ * @author MCD Application Team
+ * @version V2.6.0
+ * @date 04-November-2016
+ * @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
+ *
+ * This file provides two functions and one global variable to be called from
+ * user application:
+ * - SystemInit(): This function is called at startup just after reset and
+ * before branch to main program. This call is made inside
+ * the "startup_stm32f4xx.s" file.
+ *
+ * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+ * by the user application to setup the SysTick
+ * timer or configure other parameters.
+ *
+ * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+ * be called whenever the core clock is changed
+ * during program execution.
+ *
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; COPYRIGHT 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f4xx_system
+ * @{
+ */
+
+/** @addtogroup STM32F4xx_System_Private_Includes
+ * @{
+ */
+
+
+#include "stm32f4xx.h"
+
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_Defines
+ * @{
+ */
+
+/************************* Miscellaneous Configuration ************************/
+/*!< Uncomment the following line if you need to use external SRAM or SDRAM as data memory */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
+ || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
+/* #define DATA_IN_ExtSRAM */
+#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx ||\
+ STM32F412Zx || STM32F412Vx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/* #define DATA_IN_ExtSDRAM */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\
+ STM32F479xx */
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+ Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
+ This value must be a multiple of 0x200. */
+/******************************************************************************/
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_Variables
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+uint32_t SystemCoreClock = 16000000;
+const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4};
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes
+ * @{
+ */
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+ static void SystemInit_ExtMemCtl(void);
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Setup the microcontroller system
+ * Initialize the FPU setting, vector table location and External memory
+ * configuration.
+ * @param None
+ * @retval None
+ */
+void SystemInit(void)
+{
+ /* FPU settings ------------------------------------------------------------*/
+ #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
+ #endif
+ /* Reset the RCC clock configuration to the default reset state ------------*/
+ /* Set HSION bit */
+ RCC->CR |= (uint32_t)0x00000001;
+
+ /* Reset CFGR register */
+ RCC->CFGR = 0x00000000;
+
+ /* Reset HSEON, CSSON and PLLON bits */
+ RCC->CR &= (uint32_t)0xFEF6FFFF;
+
+ /* Reset PLLCFGR register */
+ RCC->PLLCFGR = 0x24003010;
+
+ /* Reset HSEBYP bit */
+ RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+ /* Disable all interrupts */
+ RCC->CIR = 0x00000000;
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+ SystemInit_ExtMemCtl();
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+ /* Configure the Vector Table location add offset address ------------------*/
+#ifdef VECT_TAB_SRAM
+ SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#else
+ SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+#endif
+}
+
+/**
+ * @brief Update SystemCoreClock variable according to Clock Register Values.
+ * The SystemCoreClock variable contains the core clock (HCLK), it can
+ * be used by the user application to setup the SysTick timer or configure
+ * other parameters.
+ *
+ * @note Each time the core clock (HCLK) changes, this function must be called
+ * to update SystemCoreClock variable value. Otherwise, any configuration
+ * based on this variable will be incorrect.
+ *
+ * @note - The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ *
+ * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+ *
+ * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+ *
+ * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+ * or HSI_VALUE(*) multiplied/divided by the PLL factors.
+ *
+ * (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
+ * 16 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ *
+ * (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value
+ * depends on the application requirements), user has to ensure that HSE_VALUE
+ * is same as the real frequency of the crystal used. Otherwise, this function
+ * may have wrong result.
+ *
+ * - The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ *
+ * @param None
+ * @retval None
+ */
+void SystemCoreClockUpdate(void)
+{
+ uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+ switch (tmp)
+ {
+ case 0x00: /* HSI used as system clock source */
+ SystemCoreClock = HSI_VALUE;
+ break;
+ case 0x04: /* HSE used as system clock source */
+ SystemCoreClock = HSE_VALUE;
+ break;
+ case 0x08: /* PLL used as system clock source */
+
+ /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
+ SYSCLK = PLL_VCO / PLL_P
+ */
+ pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
+ pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+
+ if (pllsource != 0)
+ {
+ /* HSE used as PLL clock source */
+ pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+ }
+ else
+ {
+ /* HSI used as PLL clock source */
+ pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+ }
+
+ pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
+ SystemCoreClock = pllvco/pllp;
+ break;
+ default:
+ SystemCoreClock = HSI_VALUE;
+ break;
+ }
+ /* Compute HCLK frequency --------------------------------------------------*/
+ /* Get HCLK prescaler */
+ tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+ /* HCLK frequency */
+ SystemCoreClock >>= tmp;
+}
+
+#if defined (DATA_IN_ExtSRAM) && defined (DATA_IN_ExtSDRAM)
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx)
+/**
+ * @brief Setup the external memory controller.
+ * Called in startup_stm32f4xx.s before jump to main.
+ * This function configures the external memories (SRAM/SDRAM)
+ * This SRAM/SDRAM will be used as program data memory (including heap and stack).
+ * @param None
+ * @retval None
+ */
+void SystemInit_ExtMemCtl(void)
+{
+ __IO uint32_t tmp = 0x00;
+
+ register uint32_t tmpreg = 0, timeout = 0xFFFF;
+ register __IO uint32_t index;
+
+ /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface clock */
+ RCC->AHB1ENR |= 0x000001F8;
+
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
+
+ /* Connect PDx pins to FMC Alternate function */
+ GPIOD->AFR[0] = 0x00CCC0CC;
+ GPIOD->AFR[1] = 0xCCCCCCCC;
+ /* Configure PDx pins in Alternate function mode */
+ GPIOD->MODER = 0xAAAA0A8A;
+ /* Configure PDx pins speed to 100 MHz */
+ GPIOD->OSPEEDR = 0xFFFF0FCF;
+ /* Configure PDx pins Output type to push-pull */
+ GPIOD->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PDx pins */
+ GPIOD->PUPDR = 0x00000000;
+
+ /* Connect PEx pins to FMC Alternate function */
+ GPIOE->AFR[0] = 0xC00CC0CC;
+ GPIOE->AFR[1] = 0xCCCCCCCC;
+ /* Configure PEx pins in Alternate function mode */
+ GPIOE->MODER = 0xAAAA828A;
+ /* Configure PEx pins speed to 100 MHz */
+ GPIOE->OSPEEDR = 0xFFFFC3CF;
+ /* Configure PEx pins Output type to push-pull */
+ GPIOE->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PEx pins */
+ GPIOE->PUPDR = 0x00000000;
+
+ /* Connect PFx pins to FMC Alternate function */
+ GPIOF->AFR[0] = 0xCCCCCCCC;
+ GPIOF->AFR[1] = 0xCCCCCCCC;
+ /* Configure PFx pins in Alternate function mode */
+ GPIOF->MODER = 0xAA800AAA;
+ /* Configure PFx pins speed to 50 MHz */
+ GPIOF->OSPEEDR = 0xAA800AAA;
+ /* Configure PFx pins Output type to push-pull */
+ GPIOF->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PFx pins */
+ GPIOF->PUPDR = 0x00000000;
+
+ /* Connect PGx pins to FMC Alternate function */
+ GPIOG->AFR[0] = 0xCCCCCCCC;
+ GPIOG->AFR[1] = 0xCCCCCCCC;
+ /* Configure PGx pins in Alternate function mode */
+ GPIOG->MODER = 0xAAAAAAAA;
+ /* Configure PGx pins speed to 50 MHz */
+ GPIOG->OSPEEDR = 0xAAAAAAAA;
+ /* Configure PGx pins Output type to push-pull */
+ GPIOG->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PGx pins */
+ GPIOG->PUPDR = 0x00000000;
+
+ /* Connect PHx pins to FMC Alternate function */
+ GPIOH->AFR[0] = 0x00C0CC00;
+ GPIOH->AFR[1] = 0xCCCCCCCC;
+ /* Configure PHx pins in Alternate function mode */
+ GPIOH->MODER = 0xAAAA08A0;
+ /* Configure PHx pins speed to 50 MHz */
+ GPIOH->OSPEEDR = 0xAAAA08A0;
+ /* Configure PHx pins Output type to push-pull */
+ GPIOH->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PHx pins */
+ GPIOH->PUPDR = 0x00000000;
+
+ /* Connect PIx pins to FMC Alternate function */
+ GPIOI->AFR[0] = 0xCCCCCCCC;
+ GPIOI->AFR[1] = 0x00000CC0;
+ /* Configure PIx pins in Alternate function mode */
+ GPIOI->MODER = 0x0028AAAA;
+ /* Configure PIx pins speed to 50 MHz */
+ GPIOI->OSPEEDR = 0x0028AAAA;
+ /* Configure PIx pins Output type to push-pull */
+ GPIOI->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PIx pins */
+ GPIOI->PUPDR = 0x00000000;
+
+/*-- FMC Configuration -------------------------------------------------------*/
+ /* Enable the FMC interface clock */
+ RCC->AHB3ENR |= 0x00000001;
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+
+ FMC_Bank5_6->SDCR[0] = 0x000019E4;
+ FMC_Bank5_6->SDTR[0] = 0x01115351;
+
+ /* SDRAM initialization sequence */
+ /* Clock enable command */
+ FMC_Bank5_6->SDCMR = 0x00000011;
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* Delay */
+ for (index = 0; index<1000; index++);
+
+ /* PALL command */
+ FMC_Bank5_6->SDCMR = 0x00000012;
+ timeout = 0xFFFF;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* Auto refresh command */
+ FMC_Bank5_6->SDCMR = 0x00000073;
+ timeout = 0xFFFF;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* MRD register program */
+ FMC_Bank5_6->SDCMR = 0x00046014;
+ timeout = 0xFFFF;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* Set refresh count */
+ tmpreg = FMC_Bank5_6->SDRTR;
+ FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
+
+ /* Disable write protection */
+ tmpreg = FMC_Bank5_6->SDCR[0];
+ FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+ /* Configure and enable Bank1_SRAM2 */
+ FMC_Bank1->BTCR[2] = 0x00001011;
+ FMC_Bank1->BTCR[3] = 0x00000201;
+ FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+#if defined(STM32F469xx) || defined(STM32F479xx)
+ /* Configure and enable Bank1_SRAM2 */
+ FMC_Bank1->BTCR[2] = 0x00001091;
+ FMC_Bank1->BTCR[3] = 0x00110212;
+ FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F469xx || STM32F479xx */
+
+ (void)(tmp);
+}
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+#elif defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+/**
+ * @brief Setup the external memory controller.
+ * Called in startup_stm32f4xx.s before jump to main.
+ * This function configures the external memories (SRAM/SDRAM)
+ * This SRAM/SDRAM will be used as program data memory (including heap and stack).
+ * @param None
+ * @retval None
+ */
+void SystemInit_ExtMemCtl(void)
+{
+ __IO uint32_t tmp = 0x00;
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#if defined (DATA_IN_ExtSDRAM)
+ register uint32_t tmpreg = 0, timeout = 0xFFFF;
+ register __IO uint32_t index;
+
+#if defined(STM32F446xx)
+ /* Enable GPIOA, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG interface
+ clock */
+ RCC->AHB1ENR |= 0x0000007D;
+#else
+ /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface
+ clock */
+ RCC->AHB1ENR |= 0x000001F8;
+#endif /* STM32F446xx */
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
+
+#if defined(STM32F446xx)
+ /* Connect PAx pins to FMC Alternate function */
+ GPIOA->AFR[0] |= 0xC0000000;
+ GPIOA->AFR[1] |= 0x00000000;
+ /* Configure PDx pins in Alternate function mode */
+ GPIOA->MODER |= 0x00008000;
+ /* Configure PDx pins speed to 50 MHz */
+ GPIOA->OSPEEDR |= 0x00008000;
+ /* Configure PDx pins Output type to push-pull */
+ GPIOA->OTYPER |= 0x00000000;
+ /* No pull-up, pull-down for PDx pins */
+ GPIOA->PUPDR |= 0x00000000;
+
+ /* Connect PCx pins to FMC Alternate function */
+ GPIOC->AFR[0] |= 0x00CC0000;
+ GPIOC->AFR[1] |= 0x00000000;
+ /* Configure PDx pins in Alternate function mode */
+ GPIOC->MODER |= 0x00000A00;
+ /* Configure PDx pins speed to 50 MHz */
+ GPIOC->OSPEEDR |= 0x00000A00;
+ /* Configure PDx pins Output type to push-pull */
+ GPIOC->OTYPER |= 0x00000000;
+ /* No pull-up, pull-down for PDx pins */
+ GPIOC->PUPDR |= 0x00000000;
+#endif /* STM32F446xx */
+
+ /* Connect PDx pins to FMC Alternate function */
+ GPIOD->AFR[0] = 0x000000CC;
+ GPIOD->AFR[1] = 0xCC000CCC;
+ /* Configure PDx pins in Alternate function mode */
+ GPIOD->MODER = 0xA02A000A;
+ /* Configure PDx pins speed to 50 MHz */
+ GPIOD->OSPEEDR = 0xA02A000A;
+ /* Configure PDx pins Output type to push-pull */
+ GPIOD->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PDx pins */
+ GPIOD->PUPDR = 0x00000000;
+
+ /* Connect PEx pins to FMC Alternate function */
+ GPIOE->AFR[0] = 0xC00000CC;
+ GPIOE->AFR[1] = 0xCCCCCCCC;
+ /* Configure PEx pins in Alternate function mode */
+ GPIOE->MODER = 0xAAAA800A;
+ /* Configure PEx pins speed to 50 MHz */
+ GPIOE->OSPEEDR = 0xAAAA800A;
+ /* Configure PEx pins Output type to push-pull */
+ GPIOE->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PEx pins */
+ GPIOE->PUPDR = 0x00000000;
+
+ /* Connect PFx pins to FMC Alternate function */
+ GPIOF->AFR[0] = 0xCCCCCCCC;
+ GPIOF->AFR[1] = 0xCCCCCCCC;
+ /* Configure PFx pins in Alternate function mode */
+ GPIOF->MODER = 0xAA800AAA;
+ /* Configure PFx pins speed to 50 MHz */
+ GPIOF->OSPEEDR = 0xAA800AAA;
+ /* Configure PFx pins Output type to push-pull */
+ GPIOF->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PFx pins */
+ GPIOF->PUPDR = 0x00000000;
+
+ /* Connect PGx pins to FMC Alternate function */
+ GPIOG->AFR[0] = 0xCCCCCCCC;
+ GPIOG->AFR[1] = 0xCCCCCCCC;
+ /* Configure PGx pins in Alternate function mode */
+ GPIOG->MODER = 0xAAAAAAAA;
+ /* Configure PGx pins speed to 50 MHz */
+ GPIOG->OSPEEDR = 0xAAAAAAAA;
+ /* Configure PGx pins Output type to push-pull */
+ GPIOG->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PGx pins */
+ GPIOG->PUPDR = 0x00000000;
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx)
+ /* Connect PHx pins to FMC Alternate function */
+ GPIOH->AFR[0] = 0x00C0CC00;
+ GPIOH->AFR[1] = 0xCCCCCCCC;
+ /* Configure PHx pins in Alternate function mode */
+ GPIOH->MODER = 0xAAAA08A0;
+ /* Configure PHx pins speed to 50 MHz */
+ GPIOH->OSPEEDR = 0xAAAA08A0;
+ /* Configure PHx pins Output type to push-pull */
+ GPIOH->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PHx pins */
+ GPIOH->PUPDR = 0x00000000;
+
+ /* Connect PIx pins to FMC Alternate function */
+ GPIOI->AFR[0] = 0xCCCCCCCC;
+ GPIOI->AFR[1] = 0x00000CC0;
+ /* Configure PIx pins in Alternate function mode */
+ GPIOI->MODER = 0x0028AAAA;
+ /* Configure PIx pins speed to 50 MHz */
+ GPIOI->OSPEEDR = 0x0028AAAA;
+ /* Configure PIx pins Output type to push-pull */
+ GPIOI->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PIx pins */
+ GPIOI->PUPDR = 0x00000000;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+/*-- FMC Configuration -------------------------------------------------------*/
+ /* Enable the FMC interface clock */
+ RCC->AHB3ENR |= 0x00000001;
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+
+ /* Configure and enable SDRAM bank1 */
+#if defined(STM32F446xx)
+ FMC_Bank5_6->SDCR[0] = 0x00001954;
+#else
+ FMC_Bank5_6->SDCR[0] = 0x000019E4;
+#endif /* STM32F446xx */
+ FMC_Bank5_6->SDTR[0] = 0x01115351;
+
+ /* SDRAM initialization sequence */
+ /* Clock enable command */
+ FMC_Bank5_6->SDCMR = 0x00000011;
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* Delay */
+ for (index = 0; index<1000; index++);
+
+ /* PALL command */
+ FMC_Bank5_6->SDCMR = 0x00000012;
+ timeout = 0xFFFF;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* Auto refresh command */
+#if defined(STM32F446xx)
+ FMC_Bank5_6->SDCMR = 0x000000F3;
+#else
+ FMC_Bank5_6->SDCMR = 0x00000073;
+#endif /* STM32F446xx */
+ timeout = 0xFFFF;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* MRD register program */
+#if defined(STM32F446xx)
+ FMC_Bank5_6->SDCMR = 0x00044014;
+#else
+ FMC_Bank5_6->SDCMR = 0x00046014;
+#endif /* STM32F446xx */
+ timeout = 0xFFFF;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* Set refresh count */
+ tmpreg = FMC_Bank5_6->SDRTR;
+#if defined(STM32F446xx)
+ FMC_Bank5_6->SDRTR = (tmpreg | (0x0000050C<<1));
+#else
+ FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
+#endif /* STM32F446xx */
+
+ /* Disable write protection */
+ tmpreg = FMC_Bank5_6->SDCR[0];
+ FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
+#endif /* DATA_IN_ExtSDRAM */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
+ || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
+
+#if defined(DATA_IN_ExtSRAM)
+/*-- GPIOs Configuration -----------------------------------------------------*/
+ /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
+ RCC->AHB1ENR |= 0x00000078;
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);
+
+ /* Connect PDx pins to FMC Alternate function */
+ GPIOD->AFR[0] = 0x00CCC0CC;
+ GPIOD->AFR[1] = 0xCCCCCCCC;
+ /* Configure PDx pins in Alternate function mode */
+ GPIOD->MODER = 0xAAAA0A8A;
+ /* Configure PDx pins speed to 100 MHz */
+ GPIOD->OSPEEDR = 0xFFFF0FCF;
+ /* Configure PDx pins Output type to push-pull */
+ GPIOD->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PDx pins */
+ GPIOD->PUPDR = 0x00000000;
+
+ /* Connect PEx pins to FMC Alternate function */
+ GPIOE->AFR[0] = 0xC00CC0CC;
+ GPIOE->AFR[1] = 0xCCCCCCCC;
+ /* Configure PEx pins in Alternate function mode */
+ GPIOE->MODER = 0xAAAA828A;
+ /* Configure PEx pins speed to 100 MHz */
+ GPIOE->OSPEEDR = 0xFFFFC3CF;
+ /* Configure PEx pins Output type to push-pull */
+ GPIOE->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PEx pins */
+ GPIOE->PUPDR = 0x00000000;
+
+ /* Connect PFx pins to FMC Alternate function */
+ GPIOF->AFR[0] = 0x00CCCCCC;
+ GPIOF->AFR[1] = 0xCCCC0000;
+ /* Configure PFx pins in Alternate function mode */
+ GPIOF->MODER = 0xAA000AAA;
+ /* Configure PFx pins speed to 100 MHz */
+ GPIOF->OSPEEDR = 0xFF000FFF;
+ /* Configure PFx pins Output type to push-pull */
+ GPIOF->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PFx pins */
+ GPIOF->PUPDR = 0x00000000;
+
+ /* Connect PGx pins to FMC Alternate function */
+ GPIOG->AFR[0] = 0x00CCCCCC;
+ GPIOG->AFR[1] = 0x000000C0;
+ /* Configure PGx pins in Alternate function mode */
+ GPIOG->MODER = 0x00085AAA;
+ /* Configure PGx pins speed to 100 MHz */
+ GPIOG->OSPEEDR = 0x000CAFFF;
+ /* Configure PGx pins Output type to push-pull */
+ GPIOG->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PGx pins */
+ GPIOG->PUPDR = 0x00000000;
+
+/*-- FMC/FSMC Configuration --------------------------------------------------*/
+ /* Enable the FMC/FSMC interface clock */
+ RCC->AHB3ENR |= 0x00000001;
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+ /* Configure and enable Bank1_SRAM2 */
+ FMC_Bank1->BTCR[2] = 0x00001011;
+ FMC_Bank1->BTCR[3] = 0x00000201;
+ FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+#if defined(STM32F469xx) || defined(STM32F479xx)
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+ /* Configure and enable Bank1_SRAM2 */
+ FMC_Bank1->BTCR[2] = 0x00001091;
+ FMC_Bank1->BTCR[3] = 0x00110212;
+ FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F469xx || STM32F479xx */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)\
+ || defined(STM32F412Zx) || defined(STM32F412Vx)
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);
+ /* Configure and enable Bank1_SRAM2 */
+ FSMC_Bank1->BTCR[2] = 0x00001011;
+ FSMC_Bank1->BTCR[3] = 0x00000201;
+ FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF;
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx */
+
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+ STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx */
+ (void)(tmp);
+}
+#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/NN/NN_Lib_Tests/nn_test/runTest.bat b/NN/NN_Lib_Tests/nn_test/runTest.bat
new file mode 100644
index 0000000..fbf8cdb
--- /dev/null
+++ b/NN/NN_Lib_Tests/nn_test/runTest.bat
@@ -0,0 +1,57 @@
+@echo off
+
+set UVEXE=C:\Keil_v5\UV4\UV4.EXE
+
+echo Building NN Test for Cortex-M7 Single Precision Little Endian
+%UVEXE% -rb -j0 arm_nnexamples_nn_test.uvprojx -t "ARMCM7_SP" -o "NN_Test_ARMCM7_SP_build.log"
+
+echo Running NN Test for Cortex-M7 Single Precision Little Endian
+%UVEXE% -d arm_nnexamples_nn_test.uvprojx -t "ARMCM7_SP" -j0
+
+type NN_TEST.log
+del NN_TEST.log
+
+echo Building NN Test for Cortex-M4 FP Little Endian
+%UVEXE% -rb -j0 arm_nnexamples_nn_test.uvprojx -t "ARMCM4_FP" -o "NN_Test_ARMCM4_FP_build.log"
+
+echo Running NN Test for Cortex-M4 FP Little Endian
+%UVEXE% -d arm_nnexamples_nn_test.uvprojx -t "ARMCM4_FP" -j0
+
+type NN_TEST.log
+del NN_TEST.log
+
+echo Building NN Test for Cortex-M4 FP Little Endian Truncate
+%UVEXE% -rb -j0 arm_nnexamples_nn_test.uvprojx -t "ARMCM4_FP_truncate" -o "NN_Test_ARMCM4_FP_truncate_build.log"
+
+echo Running NN Test for Cortex-M4 FP Little Endian Truncate
+%UVEXE% -d arm_nnexamples_nn_test.uvprojx -t "ARMCM4_FP_truncate" -j0
+
+type NN_TEST.log
+del NN_TEST.log
+
+echo Building NN Test for Cortex-M7 Single Precision Big Endian
+%UVEXE% -rb -j0 arm_nnexamples_nn_test.uvprojx -t "ARMCM7b_SP" -o "NN_Test_ARMCM7b_SP_build.log"
+
+echo Running NN Test for Cortex-M7 Single Precision Big Endian
+%UVEXE% -d arm_nnexamples_nn_test.uvprojx -t "ARMCM7b_SP" -j0
+
+type NN_TEST.log
+del NN_TEST.log
+
+echo Building NN Test for Cortex-M4 FP Big Endian
+%UVEXE% -rb -j0 arm_nnexamples_nn_test.uvprojx -t "ARMCM4b_FP" -o "NN_Test_ARMCM4b_FP_build.log"
+
+echo Running NN Test for Cortex-M4 FP Big Endian
+%UVEXE% -d arm_nnexamples_nn_test.uvprojx -t "ARMCM4b_FP" -j0
+
+type NN_TEST.log
+del NN_TEST.log
+
+echo Building NN Test for Cortex-M3
+%UVEXE% -rb -j0 arm_nnexamples_nn_test.uvprojx -t "ARMCM3" -o "NN_Test_ARMCM3_build.log"
+
+echo Running NN Test for Cortex-M3
+%UVEXE% -d arm_nnexamples_nn_test.uvprojx -t "ARMCM3" -j0
+
+type NN_TEST.log
+del NN_TEST.log \ No newline at end of file