diff options
Diffstat (limited to 'DSP/Examples/ARM/arm_variance_example')
12 files changed, 1030 insertions, 1 deletions
diff --git a/DSP/Examples/ARM/arm_variance_example/CMakeLists.txt b/DSP/Examples/ARM/arm_variance_example/CMakeLists.txt new file mode 100644 index 0000000..a2084d7 --- /dev/null +++ b/DSP/Examples/ARM/arm_variance_example/CMakeLists.txt @@ -0,0 +1,46 @@ +cmake_minimum_required (VERSION 3.6) +project (arm_variance_example VERSION 0.1) + +# Needed to include the configBoot module +list(APPEND CMAKE_MODULE_PATH ${CMAKE_CURRENT_SOURCE_DIR}/../../..) + +################################### +# +# LIBRARIES +# +################################### + +########### +# +# CMSIS DSP +# + +add_subdirectory(../../../Source bin_dsp) + + +################################### +# +# TEST APPLICATION +# +################################### + + +add_executable(arm_variance_example) + +set(ROOT ${CMAKE_CURRENT_SOURCE_DIR}/../../../../..) + +include(configBoot) + +target_sources(arm_variance_example PRIVATE arm_variance_example_f32.c) + +### Sources and libs + +target_link_libraries(arm_variance_example PRIVATE CMSISDSP) + +################################### +# +# INSTALLATION +# +################################### + +install (TARGETS arm_variance_example DESTINATION "${PROJECT_SOURCE_DIR}/varianceExampleBuild.axf")
\ No newline at end of file diff --git a/DSP/Examples/ARM/arm_variance_example/RTE/Device/ARMCM0/startup_ARMCM0.s b/DSP/Examples/ARM/arm_variance_example/RTE/Device/ARMCM0/startup_ARMCM0.s new file mode 100644 index 0000000..3333bc6 --- /dev/null +++ b/DSP/Examples/ARM/arm_variance_example/RTE/Device/ARMCM0/startup_ARMCM0.s @@ -0,0 +1,159 @@ +;/**************************************************************************//** +; * @file startup_ARMCM0.s +; * @brief CMSIS Core Device Startup File for +; * ARMCM0 Device +; * @version V5.3.1 +; * @date 09. July 2018 +; ******************************************************************************/ +;/* +; * Copyright (c) 2009-2018 Arm Limited. All rights reserved. +; * +; * SPDX-License-Identifier: Apache-2.0 +; * +; * Licensed under the Apache License, Version 2.0 (the License); you may +; * not use this file except in compliance with the License. +; * You may obtain a copy of the License at +; * +; * www.apache.org/licenses/LICENSE-2.0 +; * +; * Unless required by applicable law or agreed to in writing, software +; * distributed under the License is distributed on an AS IS BASIS, WITHOUT +; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +; * See the License for the specific language governing permissions and +; * limitations under the License. +; */ + +;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------ + + +;<h> Stack Configuration +; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +;</h> + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +__stack_limit +Stack_Mem SPACE Stack_Size +__initial_sp + + +;<h> Heap Configuration +; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +;</h> + +Heap_Size EQU 0x00000C00 + + IF Heap_Size != 0 ; Heap is provided + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + ENDIF + + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; -14 NMI Handler + DCD HardFault_Handler ; -13 Hard Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; -5 SVCall Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD PendSV_Handler ; -2 PendSV Handler + DCD SysTick_Handler ; -1 SysTick Handler + + ; Interrupts + DCD Interrupt0_Handler ; 0 Interrupt 0 + DCD Interrupt1_Handler ; 1 Interrupt 1 + DCD Interrupt2_Handler ; 2 Interrupt 2 + DCD Interrupt3_Handler ; 3 Interrupt 3 + DCD Interrupt4_Handler ; 4 Interrupt 4 + DCD Interrupt5_Handler ; 5 Interrupt 5 + DCD Interrupt6_Handler ; 6 Interrupt 6 + DCD Interrupt7_Handler ; 7 Interrupt 7 + DCD Interrupt8_Handler ; 8 Interrupt 8 + DCD Interrupt9_Handler ; 9 Interrupt 9 + + SPACE ( 22 * 4) ; Interrupts 10 .. 31 are left out +__Vectors_End +__Vectors_Size EQU __Vectors_End - __Vectors + + + AREA |.text|, CODE, READONLY + +; Reset Handler + +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + + +; Macro to define default exception/interrupt handlers. +; Default handler are weak symbols with an endless loop. +; They can be overwritten by real handlers. + MACRO + Set_Default_Handler $Handler_Name +$Handler_Name PROC + EXPORT $Handler_Name [WEAK] + B . + ENDP + MEND + + +; Default exception/interrupt handler + + Set_Default_Handler NMI_Handler + Set_Default_Handler HardFault_Handler + Set_Default_Handler SVC_Handler + Set_Default_Handler PendSV_Handler + Set_Default_Handler SysTick_Handler + + Set_Default_Handler Interrupt0_Handler + Set_Default_Handler Interrupt1_Handler + Set_Default_Handler Interrupt2_Handler + Set_Default_Handler Interrupt3_Handler + Set_Default_Handler Interrupt4_Handler + Set_Default_Handler Interrupt5_Handler + Set_Default_Handler Interrupt6_Handler + Set_Default_Handler Interrupt7_Handler + Set_Default_Handler Interrupt8_Handler + Set_Default_Handler Interrupt9_Handler + + ALIGN + + +; User setup Stack & Heap + + EXPORT __stack_limit + EXPORT __initial_sp + IF Heap_Size != 0 ; Heap is provided + EXPORT __heap_base + EXPORT __heap_limit + ENDIF + + END diff --git a/DSP/Examples/ARM/arm_variance_example/RTE/Device/ARMCM0/system_ARMCM0.c b/DSP/Examples/ARM/arm_variance_example/RTE/Device/ARMCM0/system_ARMCM0.c new file mode 100644 index 0000000..66a364c --- /dev/null +++ b/DSP/Examples/ARM/arm_variance_example/RTE/Device/ARMCM0/system_ARMCM0.c @@ -0,0 +1,56 @@ +/**************************************************************************//** + * @file system_ARMCM0.c + * @brief CMSIS Device System Source File for + * ARMCM0 Device + * @version V5.3.1 + * @date 09. July 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include "ARMCM0.h" + +/*---------------------------------------------------------------------------- + Define clocks + *----------------------------------------------------------------------------*/ +#define XTAL (50000000UL) /* Oscillator frequency */ + +#define SYSTEM_CLOCK (XTAL / 2U) + + +/*---------------------------------------------------------------------------- + System Core Clock Variable + *----------------------------------------------------------------------------*/ +uint32_t SystemCoreClock = SYSTEM_CLOCK; /* System Core Clock Frequency */ + + +/*---------------------------------------------------------------------------- + System Core Clock update function + *----------------------------------------------------------------------------*/ +void SystemCoreClockUpdate (void) +{ + SystemCoreClock = SYSTEM_CLOCK; +} + +/*---------------------------------------------------------------------------- + System initialization function + *----------------------------------------------------------------------------*/ +void SystemInit (void) +{ + SystemCoreClock = SYSTEM_CLOCK; +} diff --git a/DSP/Examples/ARM/arm_variance_example/RTE/Device/ARMCM3/startup_ARMCM3.s b/DSP/Examples/ARM/arm_variance_example/RTE/Device/ARMCM3/startup_ARMCM3.s new file mode 100644 index 0000000..2bf6f19 --- /dev/null +++ b/DSP/Examples/ARM/arm_variance_example/RTE/Device/ARMCM3/startup_ARMCM3.s @@ -0,0 +1,163 @@ +;/**************************************************************************//** +; * @file startup_ARMCM3.s +; * @brief CMSIS Core Device Startup File for +; * ARMCM3 Device +; * @version V5.3.1 +; * @date 09. July 2018 +; ******************************************************************************/ +;/* +; * Copyright (c) 2009-2018 Arm Limited. All rights reserved. +; * +; * SPDX-License-Identifier: Apache-2.0 +; * +; * Licensed under the Apache License, Version 2.0 (the License); you may +; * not use this file except in compliance with the License. +; * You may obtain a copy of the License at +; * +; * www.apache.org/licenses/LICENSE-2.0 +; * +; * Unless required by applicable law or agreed to in writing, software +; * distributed under the License is distributed on an AS IS BASIS, WITHOUT +; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +; * See the License for the specific language governing permissions and +; * limitations under the License. +; */ + +;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------ + + +;<h> Stack Configuration +; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +;</h> + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +__stack_limit +Stack_Mem SPACE Stack_Size +__initial_sp + + +;<h> Heap Configuration +; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +;</h> + +Heap_Size EQU 0x00000C00 + + IF Heap_Size != 0 ; Heap is provided + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + ENDIF + + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; -14 NMI Handler + DCD HardFault_Handler ; -13 Hard Fault Handler + DCD MemManage_Handler ; -12 MPU Fault Handler + DCD BusFault_Handler ; -11 Bus Fault Handler + DCD UsageFault_Handler ; -10 Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; -5 SVCall Handler + DCD DebugMon_Handler ; -4 Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; -2 PendSV Handler + DCD SysTick_Handler ; -1 SysTick Handler + + ; Interrupts + DCD Interrupt0_Handler ; 0 Interrupt 0 + DCD Interrupt1_Handler ; 1 Interrupt 1 + DCD Interrupt2_Handler ; 2 Interrupt 2 + DCD Interrupt3_Handler ; 3 Interrupt 3 + DCD Interrupt4_Handler ; 4 Interrupt 4 + DCD Interrupt5_Handler ; 5 Interrupt 5 + DCD Interrupt6_Handler ; 6 Interrupt 6 + DCD Interrupt7_Handler ; 7 Interrupt 7 + DCD Interrupt8_Handler ; 8 Interrupt 8 + DCD Interrupt9_Handler ; 9 Interrupt 9 + + SPACE (214 * 4) ; Interrupts 10 .. 224 are left out +__Vectors_End +__Vectors_Size EQU __Vectors_End - __Vectors + + + AREA |.text|, CODE, READONLY + +; Reset Handler + +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + + +; Macro to define default exception/interrupt handlers. +; Default handler are weak symbols with an endless loop. +; They can be overwritten by real handlers. + MACRO + Set_Default_Handler $Handler_Name +$Handler_Name PROC + EXPORT $Handler_Name [WEAK] + B . + ENDP + MEND + + +; Default exception/interrupt handler + + Set_Default_Handler NMI_Handler + Set_Default_Handler HardFault_Handler + Set_Default_Handler MemManage_Handler + Set_Default_Handler BusFault_Handler + Set_Default_Handler UsageFault_Handler + Set_Default_Handler SVC_Handler + Set_Default_Handler DebugMon_Handler + Set_Default_Handler PendSV_Handler + Set_Default_Handler SysTick_Handler + + Set_Default_Handler Interrupt0_Handler + Set_Default_Handler Interrupt1_Handler + Set_Default_Handler Interrupt2_Handler + Set_Default_Handler Interrupt3_Handler + Set_Default_Handler Interrupt4_Handler + Set_Default_Handler Interrupt5_Handler + Set_Default_Handler Interrupt6_Handler + Set_Default_Handler Interrupt7_Handler + Set_Default_Handler Interrupt8_Handler + Set_Default_Handler Interrupt9_Handler + + ALIGN + + +; User setup Stack & Heap + + EXPORT __stack_limit + EXPORT __initial_sp + IF Heap_Size != 0 ; Heap is provided + EXPORT __heap_base + EXPORT __heap_limit + ENDIF + + END diff --git a/DSP/Examples/ARM/arm_variance_example/RTE/Device/ARMCM3/system_ARMCM3.c b/DSP/Examples/ARM/arm_variance_example/RTE/Device/ARMCM3/system_ARMCM3.c new file mode 100644 index 0000000..f56b85f --- /dev/null +++ b/DSP/Examples/ARM/arm_variance_example/RTE/Device/ARMCM3/system_ARMCM3.c @@ -0,0 +1,68 @@ +/**************************************************************************//** + * @file system_ARMCM3.c + * @brief CMSIS Device System Source File for + * ARMCM3 Device + * @version V5.3.1 + * @date 09. July 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include "ARMCM3.h" + +/*---------------------------------------------------------------------------- + Define clocks + *----------------------------------------------------------------------------*/ +#define XTAL (50000000UL) /* Oscillator frequency */ + +#define SYSTEM_CLOCK (XTAL / 2U) + + +/*---------------------------------------------------------------------------- + Externals + *----------------------------------------------------------------------------*/ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + extern uint32_t __Vectors; +#endif + +/*---------------------------------------------------------------------------- + System Core Clock Variable + *----------------------------------------------------------------------------*/ +uint32_t SystemCoreClock = SYSTEM_CLOCK; /* System Core Clock Frequency */ + + +/*---------------------------------------------------------------------------- + System Core Clock update function + *----------------------------------------------------------------------------*/ +void SystemCoreClockUpdate (void) +{ + SystemCoreClock = SYSTEM_CLOCK; +} + +/*---------------------------------------------------------------------------- + System initialization function + *----------------------------------------------------------------------------*/ +void SystemInit (void) +{ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + SCB->VTOR = (uint32_t) &__Vectors; +#endif + + SystemCoreClock = SYSTEM_CLOCK; +} diff --git a/DSP/Examples/ARM/arm_variance_example/RTE/Device/ARMCM4_FP/startup_ARMCM4.s b/DSP/Examples/ARM/arm_variance_example/RTE/Device/ARMCM4_FP/startup_ARMCM4.s new file mode 100644 index 0000000..f5270c0 --- /dev/null +++ b/DSP/Examples/ARM/arm_variance_example/RTE/Device/ARMCM4_FP/startup_ARMCM4.s @@ -0,0 +1,163 @@ +;/**************************************************************************//** +; * @file startup_ARMCM4.s +; * @brief CMSIS Core Device Startup File for +; * ARMCM4 Device +; * @version V5.3.1 +; * @date 09. July 2018 +; ******************************************************************************/ +;/* +; * Copyright (c) 2009-2018 Arm Limited. All rights reserved. +; * +; * SPDX-License-Identifier: Apache-2.0 +; * +; * Licensed under the Apache License, Version 2.0 (the License); you may +; * not use this file except in compliance with the License. +; * You may obtain a copy of the License at +; * +; * www.apache.org/licenses/LICENSE-2.0 +; * +; * Unless required by applicable law or agreed to in writing, software +; * distributed under the License is distributed on an AS IS BASIS, WITHOUT +; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +; * See the License for the specific language governing permissions and +; * limitations under the License. +; */ + +;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------ + + +;<h> Stack Configuration +; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +;</h> + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +__stack_limit +Stack_Mem SPACE Stack_Size +__initial_sp + + +;<h> Heap Configuration +; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +;</h> + +Heap_Size EQU 0x00000C00 + + IF Heap_Size != 0 ; Heap is provided + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + ENDIF + + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; -14 NMI Handler + DCD HardFault_Handler ; -13 Hard Fault Handler + DCD MemManage_Handler ; -12 MPU Fault Handler + DCD BusFault_Handler ; -11 Bus Fault Handler + DCD UsageFault_Handler ; -10 Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; -5 SVCall Handler + DCD DebugMon_Handler ; -4 Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; -2 PendSV Handler + DCD SysTick_Handler ; -1 SysTick Handler + + ; Interrupts + DCD Interrupt0_Handler ; 0 Interrupt 0 + DCD Interrupt1_Handler ; 1 Interrupt 1 + DCD Interrupt2_Handler ; 2 Interrupt 2 + DCD Interrupt3_Handler ; 3 Interrupt 3 + DCD Interrupt4_Handler ; 4 Interrupt 4 + DCD Interrupt5_Handler ; 5 Interrupt 5 + DCD Interrupt6_Handler ; 6 Interrupt 6 + DCD Interrupt7_Handler ; 7 Interrupt 7 + DCD Interrupt8_Handler ; 8 Interrupt 8 + DCD Interrupt9_Handler ; 9 Interrupt 9 + + SPACE (214 * 4) ; Interrupts 10 .. 224 are left out +__Vectors_End +__Vectors_Size EQU __Vectors_End - __Vectors + + + AREA |.text|, CODE, READONLY + +; Reset Handler + +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + + +; Macro to define default exception/interrupt handlers. +; Default handler are weak symbols with an endless loop. +; They can be overwritten by real handlers. + MACRO + Set_Default_Handler $Handler_Name +$Handler_Name PROC + EXPORT $Handler_Name [WEAK] + B . + ENDP + MEND + + +; Default exception/interrupt handler + + Set_Default_Handler NMI_Handler + Set_Default_Handler HardFault_Handler + Set_Default_Handler MemManage_Handler + Set_Default_Handler BusFault_Handler + Set_Default_Handler UsageFault_Handler + Set_Default_Handler SVC_Handler + Set_Default_Handler DebugMon_Handler + Set_Default_Handler PendSV_Handler + Set_Default_Handler SysTick_Handler + + Set_Default_Handler Interrupt0_Handler + Set_Default_Handler Interrupt1_Handler + Set_Default_Handler Interrupt2_Handler + Set_Default_Handler Interrupt3_Handler + Set_Default_Handler Interrupt4_Handler + Set_Default_Handler Interrupt5_Handler + Set_Default_Handler Interrupt6_Handler + Set_Default_Handler Interrupt7_Handler + Set_Default_Handler Interrupt8_Handler + Set_Default_Handler Interrupt9_Handler + + ALIGN + + +; User setup Stack & Heap + + EXPORT __stack_limit + EXPORT __initial_sp + IF Heap_Size != 0 ; Heap is provided + EXPORT __heap_base + EXPORT __heap_limit + ENDIF + + END diff --git a/DSP/Examples/ARM/arm_variance_example/RTE/Device/ARMCM4_FP/system_ARMCM4.c b/DSP/Examples/ARM/arm_variance_example/RTE/Device/ARMCM4_FP/system_ARMCM4.c new file mode 100644 index 0000000..731facd --- /dev/null +++ b/DSP/Examples/ARM/arm_variance_example/RTE/Device/ARMCM4_FP/system_ARMCM4.c @@ -0,0 +1,83 @@ +/**************************************************************************//** + * @file system_ARMCM4.c + * @brief CMSIS Device System Source File for + * ARMCM4 Device + * @version V5.3.1 + * @date 09. July 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined (ARMCM4) + #include "ARMCM4.h" +#elif defined (ARMCM4_FP) + #include "ARMCM4_FP.h" +#else + #error device not specified! +#endif + +/*---------------------------------------------------------------------------- + Define clocks + *----------------------------------------------------------------------------*/ +#define XTAL (50000000UL) /* Oscillator frequency */ + +#define SYSTEM_CLOCK (XTAL / 2U) + + +/*---------------------------------------------------------------------------- + Externals + *----------------------------------------------------------------------------*/ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + extern uint32_t __Vectors; +#endif + +/*---------------------------------------------------------------------------- + System Core Clock Variable + *----------------------------------------------------------------------------*/ +uint32_t SystemCoreClock = SYSTEM_CLOCK; /* System Core Clock Frequency */ + + +/*---------------------------------------------------------------------------- + System Core Clock update function + *----------------------------------------------------------------------------*/ +void SystemCoreClockUpdate (void) +{ + SystemCoreClock = SYSTEM_CLOCK; +} + +/*---------------------------------------------------------------------------- + System initialization function + *----------------------------------------------------------------------------*/ +void SystemInit (void) +{ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + SCB->VTOR = (uint32_t) &__Vectors; +#endif + +#if defined (__FPU_USED) && (__FPU_USED == 1U) + SCB->CPACR |= ((3U << 10U*2U) | /* enable CP10 Full Access */ + (3U << 11U*2U) ); /* enable CP11 Full Access */ +#endif + +#ifdef UNALIGNED_SUPPORT_DISABLE + SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk; +#endif + + SystemCoreClock = SYSTEM_CLOCK; +} diff --git a/DSP/Examples/ARM/arm_variance_example/RTE/Device/ARMCM7_SP/startup_ARMCM7.s b/DSP/Examples/ARM/arm_variance_example/RTE/Device/ARMCM7_SP/startup_ARMCM7.s new file mode 100644 index 0000000..abddc8d --- /dev/null +++ b/DSP/Examples/ARM/arm_variance_example/RTE/Device/ARMCM7_SP/startup_ARMCM7.s @@ -0,0 +1,163 @@ +;/**************************************************************************//** +; * @file startup_ARMCM7.s +; * @brief CMSIS Core Device Startup File for +; * ARMCM7 Device +; * @version V5.3.1 +; * @date 09. July 2018 +; ******************************************************************************/ +;/* +; * Copyright (c) 2009-2018 Arm Limited. All rights reserved. +; * +; * SPDX-License-Identifier: Apache-2.0 +; * +; * Licensed under the Apache License, Version 2.0 (the License); you may +; * not use this file except in compliance with the License. +; * You may obtain a copy of the License at +; * +; * www.apache.org/licenses/LICENSE-2.0 +; * +; * Unless required by applicable law or agreed to in writing, software +; * distributed under the License is distributed on an AS IS BASIS, WITHOUT +; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +; * See the License for the specific language governing permissions and +; * limitations under the License. +; */ + +;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------ + + +;<h> Stack Configuration +; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +;</h> + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +__stack_limit +Stack_Mem SPACE Stack_Size +__initial_sp + + +;<h> Heap Configuration +; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +;</h> + +Heap_Size EQU 0x00000C00 + + IF Heap_Size != 0 ; Heap is provided + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + ENDIF + + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; -14 NMI Handler + DCD HardFault_Handler ; -13 Hard Fault Handler + DCD MemManage_Handler ; -12 MPU Fault Handler + DCD BusFault_Handler ; -11 Bus Fault Handler + DCD UsageFault_Handler ; -10 Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; -5 SVCall Handler + DCD DebugMon_Handler ; -4 Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; -2 PendSV Handler + DCD SysTick_Handler ; -1 SysTick Handler + + ; Interrupts + DCD Interrupt0_Handler ; 0 Interrupt 0 + DCD Interrupt1_Handler ; 1 Interrupt 1 + DCD Interrupt2_Handler ; 2 Interrupt 2 + DCD Interrupt3_Handler ; 3 Interrupt 3 + DCD Interrupt4_Handler ; 4 Interrupt 4 + DCD Interrupt5_Handler ; 5 Interrupt 5 + DCD Interrupt6_Handler ; 6 Interrupt 6 + DCD Interrupt7_Handler ; 7 Interrupt 7 + DCD Interrupt8_Handler ; 8 Interrupt 8 + DCD Interrupt9_Handler ; 9 Interrupt 9 + + SPACE (214 * 4) ; Interrupts 10 .. 224 are left out +__Vectors_End +__Vectors_Size EQU __Vectors_End - __Vectors + + + AREA |.text|, CODE, READONLY + +; Reset Handler + +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + + +; Macro to define default exception/interrupt handlers. +; Default handler are weak symbols with an endless loop. +; They can be overwritten by real handlers. + MACRO + Set_Default_Handler $Handler_Name +$Handler_Name PROC + EXPORT $Handler_Name [WEAK] + B . + ENDP + MEND + + +; Default exception/interrupt handler + + Set_Default_Handler NMI_Handler + Set_Default_Handler HardFault_Handler + Set_Default_Handler MemManage_Handler + Set_Default_Handler BusFault_Handler + Set_Default_Handler UsageFault_Handler + Set_Default_Handler SVC_Handler + Set_Default_Handler DebugMon_Handler + Set_Default_Handler PendSV_Handler + Set_Default_Handler SysTick_Handler + + Set_Default_Handler Interrupt0_Handler + Set_Default_Handler Interrupt1_Handler + Set_Default_Handler Interrupt2_Handler + Set_Default_Handler Interrupt3_Handler + Set_Default_Handler Interrupt4_Handler + Set_Default_Handler Interrupt5_Handler + Set_Default_Handler Interrupt6_Handler + Set_Default_Handler Interrupt7_Handler + Set_Default_Handler Interrupt8_Handler + Set_Default_Handler Interrupt9_Handler + + ALIGN + + +; User setup Stack & Heap + + EXPORT __stack_limit + EXPORT __initial_sp + IF Heap_Size != 0 ; Heap is provided + EXPORT __heap_base + EXPORT __heap_limit + ENDIF + + END diff --git a/DSP/Examples/ARM/arm_variance_example/RTE/Device/ARMCM7_SP/system_ARMCM7.c b/DSP/Examples/ARM/arm_variance_example/RTE/Device/ARMCM7_SP/system_ARMCM7.c new file mode 100644 index 0000000..69e2a8d --- /dev/null +++ b/DSP/Examples/ARM/arm_variance_example/RTE/Device/ARMCM7_SP/system_ARMCM7.c @@ -0,0 +1,85 @@ +/**************************************************************************//** + * @file system_ARMCM7.c + * @brief CMSIS Device System Source File for + * ARMCM7 Device + * @version V5.3.1 + * @date 09. July 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined (ARMCM7) + #include "ARMCM7.h" +#elif defined (ARMCM7_SP) + #include "ARMCM7_SP.h" +#elif defined (ARMCM7_DP) + #include "ARMCM7_DP.h" +#else + #error device not specified! +#endif + +/*---------------------------------------------------------------------------- + Define clocks + *----------------------------------------------------------------------------*/ +#define XTAL (50000000UL) /* Oscillator frequency */ + +#define SYSTEM_CLOCK (XTAL / 2U) + + +/*---------------------------------------------------------------------------- + Externals + *----------------------------------------------------------------------------*/ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + extern uint32_t __Vectors; +#endif + +/*---------------------------------------------------------------------------- + System Core Clock Variable + *----------------------------------------------------------------------------*/ +uint32_t SystemCoreClock = SYSTEM_CLOCK; /* System Core Clock Frequency */ + + +/*---------------------------------------------------------------------------- + System Core Clock update function + *----------------------------------------------------------------------------*/ +void SystemCoreClockUpdate (void) +{ + SystemCoreClock = SYSTEM_CLOCK; +} + +/*---------------------------------------------------------------------------- + System initialization function + *----------------------------------------------------------------------------*/ +void SystemInit (void) +{ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + SCB->VTOR = (uint32_t) &__Vectors; +#endif + +#if defined (__FPU_USED) && (__FPU_USED == 1U) + SCB->CPACR |= ((3U << 10U*2U) | /* enable CP10 Full Access */ + (3U << 11U*2U) ); /* enable CP11 Full Access */ +#endif + +#ifdef UNALIGNED_SUPPORT_DISABLE + SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk; +#endif + + SystemCoreClock = SYSTEM_CLOCK; +} diff --git a/DSP/Examples/ARM/arm_variance_example/arm_variance_example_f32.c b/DSP/Examples/ARM/arm_variance_example/arm_variance_example_f32.c index b067a84..13dde7b 100644 --- a/DSP/Examples/ARM/arm_variance_example/arm_variance_example_f32.c +++ b/DSP/Examples/ARM/arm_variance_example/arm_variance_example_f32.c @@ -90,6 +90,7 @@ /** \example arm_variance_example_f32.c */ + #include <math.h> #include "arm_math.h" @@ -144,6 +145,11 @@ int32_t main(void) status = ARM_MATH_SUCCESS; +#if defined(FILEIO) + printf("START\n"); +#endif + + /* Calculation of mean value of input */ /* x' = 1/blockSize * (x(0)* 1 + x(1) * 1 + ... + x(n-1) * 1) */ @@ -188,17 +194,32 @@ int32_t main(void) diff = fabsf(refVarianceOut - variance); /* Comparison of variance value with reference */ + if (diff > DELTA) { status = ARM_MATH_TEST_FAILURE; } + +#if !defined(FILEIO) if ( status != ARM_MATH_SUCCESS) { while (1); } - while (1); /* main function does not return */ + while (1); /* main function does not return */ +#else + if (status == ARM_MATH_SUCCESS) + { + printf("SUCCESS\n"); + } + else + { + printf("FAILURE\n"); + } +#endif } /** \endlink */ + + diff --git a/DSP/Examples/ARM/arm_variance_example/buildmake.bat b/DSP/Examples/ARM/arm_variance_example/buildmake.bat new file mode 100644 index 0000000..8ee72d2 --- /dev/null +++ b/DSP/Examples/ARM/arm_variance_example/buildmake.bat @@ -0,0 +1,16 @@ +REM Example cmake command. +cmake -DBASICMATH=OFF ^ +-DCOMPLEXMATH=OFF ^ +-DCONTROLLER=OFF ^ +-DFASTMATH=OFF ^ +-DFILTERING=ON ^ +-DMATRIX=OFF ^ +-DSTATISTICS=OFF ^ +-DSUPPORT=OFF ^ +-DTRANSFORM=OFF ^ +-DCONFIGTABLE=ON ^ +-DARM_LMS_NORM_Q15=ON ^ +-DCMAKE_TOOLCHAIN_FILE=../../../../armcc.cmake ^ +-DNEON=ON ^ +-DARM_CPU="cortex-a5" ^ +-G "Unix Makefiles" ..
\ No newline at end of file diff --git a/DSP/Examples/ARM/arm_variance_example/run.bat b/DSP/Examples/ARM/arm_variance_example/run.bat new file mode 100644 index 0000000..a7d2f34 --- /dev/null +++ b/DSP/Examples/ARM/arm_variance_example/run.bat @@ -0,0 +1,6 @@ +REM Example commands to run on ArmDS FVP + +REM "C:\Program Files\ARM\Development Studio 2019.0\sw\models\bin\FVP_MPS2_Cortex-M7.exe" -a arm_variance_example + +"C:\Program Files\ARM\Development Studio 2019.0\sw\models\bin\FVP_VE_Cortex-A5x1.exe" -a arm_variance_example + |