Official ARM version: v5.6.0HEADmaster

20 files changed, 3622 insertions, 0 deletions

diff --git a/NN/Examples/ARM/arm_nn_examples/cifar10/RTE/Device/ARMCM0/startup_ARMCM0.s b/NN/Examples/ARM/arm_nn_examples/cifar10/RTE/Device/ARMCM0/startup_ARMCM0.s
new file mode 100644
index 0000000..9fc447d
--- /dev/null
+++ b/NN/Examples/ARM/arm_nn_examples/cifar10/RTE/Device/ARMCM0/startup_ARMCM0.s
@@ -0,0 +1,242 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM0.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM0 Device Series
+; * @version  V5.00
+; * @date     02. March 2016
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;/*
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+;*/
+
+
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000C00
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp              ; Top of Stack
+                DCD     Reset_Handler             ; Reset Handler
+                DCD     NMI_Handler               ; NMI Handler
+                DCD     HardFault_Handler         ; Hard Fault Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     SVC_Handler               ; SVCall Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     PendSV_Handler            ; PendSV Handler
+                DCD     SysTick_Handler           ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WDT_IRQHandler            ;  0:  Watchdog Timer
+                DCD     RTC_IRQHandler            ;  1:  Real Time Clock
+                DCD     TIM0_IRQHandler           ;  2:  Timer0 / Timer1
+                DCD     TIM2_IRQHandler           ;  3:  Timer2 / Timer3
+                DCD     MCIA_IRQHandler           ;  4:  MCIa
+                DCD     MCIB_IRQHandler           ;  5:  MCIb
+                DCD     UART0_IRQHandler          ;  6:  UART0 - DUT FPGA
+                DCD     UART1_IRQHandler          ;  7:  UART1 - DUT FPGA
+                DCD     UART2_IRQHandler          ;  8:  UART2 - DUT FPGA
+                DCD     UART4_IRQHandler          ;  9:  UART4 - not connected
+                DCD     AACI_IRQHandler           ; 10: AACI / AC97
+                DCD     CLCD_IRQHandler           ; 11: CLCD Combined Interrupt
+                DCD     ENET_IRQHandler           ; 12: Ethernet
+                DCD     USBDC_IRQHandler          ; 13: USB Device
+                DCD     USBHC_IRQHandler          ; 14: USB Host Controller
+                DCD     CHLCD_IRQHandler          ; 15: Character LCD
+                DCD     FLEXRAY_IRQHandler        ; 16: Flexray
+                DCD     CAN_IRQHandler            ; 17: CAN
+                DCD     LIN_IRQHandler            ; 18: LIN
+                DCD     I2C_IRQHandler            ; 19: I2C ADC/DAC
+                DCD     0                         ; 20: Reserved
+                DCD     0                         ; 21: Reserved
+                DCD     0                         ; 22: Reserved
+                DCD     0                         ; 23: Reserved
+                DCD     0                         ; 24: Reserved
+                DCD     0                         ; 25: Reserved
+                DCD     0                         ; 26: Reserved
+                DCD     0                         ; 27: Reserved
+                DCD     CPU_CLCD_IRQHandler       ; 28: Reserved - CPU FPGA CLCD
+                DCD     0                         ; 29: Reserved - CPU FPGA
+                DCD     UART3_IRQHandler          ; 30: UART3    - CPU FPGA
+                DCD     SPI_IRQHandler            ; 31: SPI Touchscreen - CPU FPGA
+__Vectors_End
+
+__Vectors_Size  EQU     __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT  Reset_Handler             [WEAK]
+                IMPORT  SystemInit
+                IMPORT  __main
+                LDR     R0, =SystemInit
+                BLX     R0
+                LDR     R0, =__main
+                BX      R0
+                ENDP
+
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler               [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler         [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler               [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler            [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler           [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WDT_IRQHandler            [WEAK]
+                EXPORT  RTC_IRQHandler            [WEAK]
+                EXPORT  TIM0_IRQHandler           [WEAK]
+                EXPORT  TIM2_IRQHandler           [WEAK]
+                EXPORT  MCIA_IRQHandler           [WEAK]
+                EXPORT  MCIB_IRQHandler           [WEAK]
+                EXPORT  UART0_IRQHandler          [WEAK]
+                EXPORT  UART1_IRQHandler          [WEAK]
+                EXPORT  UART2_IRQHandler          [WEAK]
+                EXPORT  UART3_IRQHandler          [WEAK]
+                EXPORT  UART4_IRQHandler          [WEAK]
+                EXPORT  AACI_IRQHandler           [WEAK]
+                EXPORT  CLCD_IRQHandler           [WEAK]
+                EXPORT  ENET_IRQHandler           [WEAK]
+                EXPORT  USBDC_IRQHandler          [WEAK]
+                EXPORT  USBHC_IRQHandler          [WEAK]
+                EXPORT  CHLCD_IRQHandler          [WEAK]
+                EXPORT  FLEXRAY_IRQHandler        [WEAK]
+                EXPORT  CAN_IRQHandler            [WEAK]
+                EXPORT  LIN_IRQHandler            [WEAK]
+                EXPORT  I2C_IRQHandler            [WEAK]
+                EXPORT  CPU_CLCD_IRQHandler       [WEAK]
+                EXPORT  SPI_IRQHandler            [WEAK]
+
+WDT_IRQHandler
+RTC_IRQHandler
+TIM0_IRQHandler
+TIM2_IRQHandler
+MCIA_IRQHandler
+MCIB_IRQHandler
+UART0_IRQHandler
+UART1_IRQHandler
+UART2_IRQHandler
+UART3_IRQHandler
+UART4_IRQHandler
+AACI_IRQHandler
+CLCD_IRQHandler
+ENET_IRQHandler
+USBDC_IRQHandler
+USBHC_IRQHandler
+CHLCD_IRQHandler
+FLEXRAY_IRQHandler
+CAN_IRQHandler
+LIN_IRQHandler
+I2C_IRQHandler
+CPU_CLCD_IRQHandler
+SPI_IRQHandler
+                B       .
+
+                ENDP
+
+
+                ALIGN
+
+
+; User Initial Stack & Heap
+
+                IF      :DEF:__MICROLIB
+
+                EXPORT  __initial_sp
+                EXPORT  __heap_base
+                EXPORT  __heap_limit
+
+                ELSE
+
+                IMPORT  __use_two_region_memory
+                EXPORT  __user_initial_stackheap
+
+__user_initial_stackheap PROC
+                LDR     R0, =  Heap_Mem
+                LDR     R1, =(Stack_Mem + Stack_Size)
+                LDR     R2, = (Heap_Mem +  Heap_Size)
+                LDR     R3, = Stack_Mem
+                BX      LR
+                ENDP
+
+                ALIGN
+
+                ENDIF
+
+
+                END
diff --git a/NN/Examples/ARM/arm_nn_examples/cifar10/RTE/Device/ARMCM0/system_ARMCM0.c b/NN/Examples/ARM/arm_nn_examples/cifar10/RTE/Device/ARMCM0/system_ARMCM0.c
new file mode 100644
index 0000000..66829ad
--- /dev/null
+++ b/NN/Examples/ARM/arm_nn_examples/cifar10/RTE/Device/ARMCM0/system_ARMCM0.c
@@ -0,0 +1,56 @@
+/**************************************************************************//**
+ * @file     system_ARMCM0.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM0 Device Series
+ * @version  V5.00
+ * @date     08. April 2016
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "ARMCM0.h"
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            ( 5000000U)      /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (5 * XTAL)
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
diff --git a/NN/Examples/ARM/arm_nn_examples/cifar10/RTE/Device/ARMCM3/startup_ARMCM3.s b/NN/Examples/ARM/arm_nn_examples/cifar10/RTE/Device/ARMCM3/startup_ARMCM3.s
new file mode 100644
index 0000000..16e56b0
--- /dev/null
+++ b/NN/Examples/ARM/arm_nn_examples/cifar10/RTE/Device/ARMCM3/startup_ARMCM3.s
@@ -0,0 +1,262 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM3.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM3 Device Series
+; * @version  V5.00
+; * @date     02. March 2016
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;/*
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+;*/
+
+
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000C00
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp              ; Top of Stack
+                DCD     Reset_Handler             ; Reset Handler
+                DCD     NMI_Handler               ; NMI Handler
+                DCD     HardFault_Handler         ; Hard Fault Handler
+                DCD     MemManage_Handler         ; MPU Fault Handler
+                DCD     BusFault_Handler          ; Bus Fault Handler
+                DCD     UsageFault_Handler        ; Usage Fault Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     SVC_Handler               ; SVCall Handler
+                DCD     DebugMon_Handler          ; Debug Monitor Handler
+                DCD     0                         ; Reserved
+                DCD     PendSV_Handler            ; PendSV Handler
+                DCD     SysTick_Handler           ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WDT_IRQHandler            ;  0:  Watchdog Timer
+                DCD     RTC_IRQHandler            ;  1:  Real Time Clock
+                DCD     TIM0_IRQHandler           ;  2:  Timer0 / Timer1
+                DCD     TIM2_IRQHandler           ;  3:  Timer2 / Timer3
+                DCD     MCIA_IRQHandler           ;  4:  MCIa
+                DCD     MCIB_IRQHandler           ;  5:  MCIb
+                DCD     UART0_IRQHandler          ;  6:  UART0 - DUT FPGA
+                DCD     UART1_IRQHandler          ;  7:  UART1 - DUT FPGA
+                DCD     UART2_IRQHandler          ;  8:  UART2 - DUT FPGA
+                DCD     UART4_IRQHandler          ;  9:  UART4 - not connected
+                DCD     AACI_IRQHandler           ; 10: AACI / AC97
+                DCD     CLCD_IRQHandler           ; 11: CLCD Combined Interrupt
+                DCD     ENET_IRQHandler           ; 12: Ethernet
+                DCD     USBDC_IRQHandler          ; 13: USB Device
+                DCD     USBHC_IRQHandler          ; 14: USB Host Controller
+                DCD     CHLCD_IRQHandler          ; 15: Character LCD
+                DCD     FLEXRAY_IRQHandler        ; 16: Flexray
+                DCD     CAN_IRQHandler            ; 17: CAN
+                DCD     LIN_IRQHandler            ; 18: LIN
+                DCD     I2C_IRQHandler            ; 19: I2C ADC/DAC
+                DCD     0                         ; 20: Reserved
+                DCD     0                         ; 21: Reserved
+                DCD     0                         ; 22: Reserved
+                DCD     0                         ; 23: Reserved
+                DCD     0                         ; 24: Reserved
+                DCD     0                         ; 25: Reserved
+                DCD     0                         ; 26: Reserved
+                DCD     0                         ; 27: Reserved
+                DCD     CPU_CLCD_IRQHandler       ; 28: Reserved - CPU FPGA CLCD
+                DCD     0                         ; 29: Reserved - CPU FPGA
+                DCD     UART3_IRQHandler          ; 30: UART3    - CPU FPGA
+                DCD     SPI_IRQHandler            ; 31: SPI Touchscreen - CPU FPGA
+__Vectors_End
+
+__Vectors_Size  EQU     __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT  Reset_Handler             [WEAK]
+                IMPORT  SystemInit
+                IMPORT  __main
+                LDR     R0, =SystemInit
+                BLX     R0
+                LDR     R0, =__main
+                BX      R0
+                ENDP
+
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler               [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler         [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler         [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler          [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler        [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler               [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler          [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler            [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler           [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WDT_IRQHandler            [WEAK]
+                EXPORT  RTC_IRQHandler            [WEAK]
+                EXPORT  TIM0_IRQHandler           [WEAK]
+                EXPORT  TIM2_IRQHandler           [WEAK]
+                EXPORT  MCIA_IRQHandler           [WEAK]
+                EXPORT  MCIB_IRQHandler           [WEAK]
+                EXPORT  UART0_IRQHandler          [WEAK]
+                EXPORT  UART1_IRQHandler          [WEAK]
+                EXPORT  UART2_IRQHandler          [WEAK]
+                EXPORT  UART3_IRQHandler          [WEAK]
+                EXPORT  UART4_IRQHandler          [WEAK]
+                EXPORT  AACI_IRQHandler           [WEAK]
+                EXPORT  CLCD_IRQHandler           [WEAK]
+                EXPORT  ENET_IRQHandler           [WEAK]
+                EXPORT  USBDC_IRQHandler          [WEAK]
+                EXPORT  USBHC_IRQHandler          [WEAK]
+                EXPORT  CHLCD_IRQHandler          [WEAK]
+                EXPORT  FLEXRAY_IRQHandler        [WEAK]
+                EXPORT  CAN_IRQHandler            [WEAK]
+                EXPORT  LIN_IRQHandler            [WEAK]
+                EXPORT  I2C_IRQHandler            [WEAK]
+                EXPORT  CPU_CLCD_IRQHandler       [WEAK]
+                EXPORT  SPI_IRQHandler            [WEAK]
+
+WDT_IRQHandler
+RTC_IRQHandler
+TIM0_IRQHandler
+TIM2_IRQHandler
+MCIA_IRQHandler
+MCIB_IRQHandler
+UART0_IRQHandler
+UART1_IRQHandler
+UART2_IRQHandler
+UART3_IRQHandler
+UART4_IRQHandler
+AACI_IRQHandler
+CLCD_IRQHandler
+ENET_IRQHandler
+USBDC_IRQHandler
+USBHC_IRQHandler
+CHLCD_IRQHandler
+FLEXRAY_IRQHandler
+CAN_IRQHandler
+LIN_IRQHandler
+I2C_IRQHandler
+CPU_CLCD_IRQHandler
+SPI_IRQHandler
+                B       .
+
+                ENDP
+
+
+                ALIGN
+
+
+; User Initial Stack & Heap
+
+                IF      :DEF:__MICROLIB
+
+                EXPORT  __initial_sp
+                EXPORT  __heap_base
+                EXPORT  __heap_limit
+
+                ELSE
+
+                IMPORT  __use_two_region_memory
+                EXPORT  __user_initial_stackheap
+
+__user_initial_stackheap PROC
+                LDR     R0, =  Heap_Mem
+                LDR     R1, =(Stack_Mem + Stack_Size)
+                LDR     R2, = (Heap_Mem +  Heap_Size)
+                LDR     R3, = Stack_Mem
+                BX      LR
+                ENDP
+
+                ALIGN
+
+                ENDIF
+
+
+                END
diff --git a/NN/Examples/ARM/arm_nn_examples/cifar10/RTE/Device/ARMCM3/system_ARMCM3.c b/NN/Examples/ARM/arm_nn_examples/cifar10/RTE/Device/ARMCM3/system_ARMCM3.c
new file mode 100644
index 0000000..f08df7a
--- /dev/null
+++ b/NN/Examples/ARM/arm_nn_examples/cifar10/RTE/Device/ARMCM3/system_ARMCM3.c
@@ -0,0 +1,68 @@
+/**************************************************************************//**
+ * @file     system_ARMCM3.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM3 Device Series
+ * @version  V5.00
+ * @date     08. April 2016
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "ARMCM3.h"
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            ( 5000000U)      /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (5 * XTAL)
+
+
+/*----------------------------------------------------------------------------
+  Externals
+ *----------------------------------------------------------------------------*/
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
+  extern uint32_t __Vectors;
+#endif
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
+  SCB->VTOR = (uint32_t) &__Vectors;
+#endif
+
+  SystemCoreClock = SYSTEM_CLOCK;
+}
diff --git a/NN/Examples/ARM/arm_nn_examples/cifar10/RTE/Device/ARMCM4_FP/startup_ARMCM4.s b/NN/Examples/ARM/arm_nn_examples/cifar10/RTE/Device/ARMCM4_FP/startup_ARMCM4.s
new file mode 100644
index 0000000..dae6439
--- /dev/null
+++ b/NN/Examples/ARM/arm_nn_examples/cifar10/RTE/Device/ARMCM4_FP/startup_ARMCM4.s
@@ -0,0 +1,262 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM4.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM4 Device Series
+; * @version  V5.00
+; * @date     02. March 2016
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;/*
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+;*/
+
+
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000C00
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp              ; Top of Stack
+                DCD     Reset_Handler             ; Reset Handler
+                DCD     NMI_Handler               ; NMI Handler
+                DCD     HardFault_Handler         ; Hard Fault Handler
+                DCD     MemManage_Handler         ; MPU Fault Handler
+                DCD     BusFault_Handler          ; Bus Fault Handler
+                DCD     UsageFault_Handler        ; Usage Fault Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     SVC_Handler               ; SVCall Handler
+                DCD     DebugMon_Handler          ; Debug Monitor Handler
+                DCD     0                         ; Reserved
+                DCD     PendSV_Handler            ; PendSV Handler
+                DCD     SysTick_Handler           ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WDT_IRQHandler            ;  0:  Watchdog Timer
+                DCD     RTC_IRQHandler            ;  1:  Real Time Clock
+                DCD     TIM0_IRQHandler           ;  2:  Timer0 / Timer1
+                DCD     TIM2_IRQHandler           ;  3:  Timer2 / Timer3
+                DCD     MCIA_IRQHandler           ;  4:  MCIa
+                DCD     MCIB_IRQHandler           ;  5:  MCIb
+                DCD     UART0_IRQHandler          ;  6:  UART0 - DUT FPGA
+                DCD     UART1_IRQHandler          ;  7:  UART1 - DUT FPGA
+                DCD     UART2_IRQHandler          ;  8:  UART2 - DUT FPGA
+                DCD     UART4_IRQHandler          ;  9:  UART4 - not connected
+                DCD     AACI_IRQHandler           ; 10: AACI / AC97
+                DCD     CLCD_IRQHandler           ; 11: CLCD Combined Interrupt
+                DCD     ENET_IRQHandler           ; 12: Ethernet
+                DCD     USBDC_IRQHandler          ; 13: USB Device
+                DCD     USBHC_IRQHandler          ; 14: USB Host Controller
+                DCD     CHLCD_IRQHandler          ; 15: Character LCD
+                DCD     FLEXRAY_IRQHandler        ; 16: Flexray
+                DCD     CAN_IRQHandler            ; 17: CAN
+                DCD     LIN_IRQHandler            ; 18: LIN
+                DCD     I2C_IRQHandler            ; 19: I2C ADC/DAC
+                DCD     0                         ; 20: Reserved
+                DCD     0                         ; 21: Reserved
+                DCD     0                         ; 22: Reserved
+                DCD     0                         ; 23: Reserved
+                DCD     0                         ; 24: Reserved
+                DCD     0                         ; 25: Reserved
+                DCD     0                         ; 26: Reserved
+                DCD     0                         ; 27: Reserved
+                DCD     CPU_CLCD_IRQHandler       ; 28: Reserved - CPU FPGA CLCD
+                DCD     0                         ; 29: Reserved - CPU FPGA
+                DCD     UART3_IRQHandler          ; 30: UART3    - CPU FPGA
+                DCD     SPI_IRQHandler            ; 31: SPI Touchscreen - CPU FPGA
+__Vectors_End
+
+__Vectors_Size  EQU     __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT  Reset_Handler             [WEAK]
+                IMPORT  SystemInit
+                IMPORT  __main
+                LDR     R0, =SystemInit
+                BLX     R0
+                LDR     R0, =__main
+                BX      R0
+                ENDP
+
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler               [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler         [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler         [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler          [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler        [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler               [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler          [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler            [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler           [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WDT_IRQHandler            [WEAK]
+                EXPORT  RTC_IRQHandler            [WEAK]
+                EXPORT  TIM0_IRQHandler           [WEAK]
+                EXPORT  TIM2_IRQHandler           [WEAK]
+                EXPORT  MCIA_IRQHandler           [WEAK]
+                EXPORT  MCIB_IRQHandler           [WEAK]
+                EXPORT  UART0_IRQHandler          [WEAK]
+                EXPORT  UART1_IRQHandler          [WEAK]
+                EXPORT  UART2_IRQHandler          [WEAK]
+                EXPORT  UART3_IRQHandler          [WEAK]
+                EXPORT  UART4_IRQHandler          [WEAK]
+                EXPORT  AACI_IRQHandler           [WEAK]
+                EXPORT  CLCD_IRQHandler           [WEAK]
+                EXPORT  ENET_IRQHandler           [WEAK]
+                EXPORT  USBDC_IRQHandler          [WEAK]
+                EXPORT  USBHC_IRQHandler          [WEAK]
+                EXPORT  CHLCD_IRQHandler          [WEAK]
+                EXPORT  FLEXRAY_IRQHandler        [WEAK]
+                EXPORT  CAN_IRQHandler            [WEAK]
+                EXPORT  LIN_IRQHandler            [WEAK]
+                EXPORT  I2C_IRQHandler            [WEAK]
+                EXPORT  CPU_CLCD_IRQHandler       [WEAK]
+                EXPORT  SPI_IRQHandler            [WEAK]
+
+WDT_IRQHandler
+RTC_IRQHandler
+TIM0_IRQHandler
+TIM2_IRQHandler
+MCIA_IRQHandler
+MCIB_IRQHandler
+UART0_IRQHandler
+UART1_IRQHandler
+UART2_IRQHandler
+UART3_IRQHandler
+UART4_IRQHandler
+AACI_IRQHandler
+CLCD_IRQHandler
+ENET_IRQHandler
+USBDC_IRQHandler
+USBHC_IRQHandler
+CHLCD_IRQHandler
+FLEXRAY_IRQHandler
+CAN_IRQHandler
+LIN_IRQHandler
+I2C_IRQHandler
+CPU_CLCD_IRQHandler
+SPI_IRQHandler
+                B       .
+
+                ENDP
+
+
+                ALIGN
+
+
+; User Initial Stack & Heap
+
+                IF      :DEF:__MICROLIB
+
+                EXPORT  __initial_sp
+                EXPORT  __heap_base
+                EXPORT  __heap_limit
+
+                ELSE
+
+                IMPORT  __use_two_region_memory
+                EXPORT  __user_initial_stackheap
+
+__user_initial_stackheap PROC
+                LDR     R0, =  Heap_Mem
+                LDR     R1, =(Stack_Mem + Stack_Size)
+                LDR     R2, = (Heap_Mem +  Heap_Size)
+                LDR     R3, = Stack_Mem
+                BX      LR
+                ENDP
+
+                ALIGN
+
+                ENDIF
+
+
+                END
diff --git a/NN/Examples/ARM/arm_nn_examples/cifar10/RTE/Device/ARMCM4_FP/system_ARMCM4.c b/NN/Examples/ARM/arm_nn_examples/cifar10/RTE/Device/ARMCM4_FP/system_ARMCM4.c
new file mode 100644
index 0000000..070fa1e
--- /dev/null
+++ b/NN/Examples/ARM/arm_nn_examples/cifar10/RTE/Device/ARMCM4_FP/system_ARMCM4.c
@@ -0,0 +1,83 @@
+/**************************************************************************//**
+ * @file     system_ARMCM4.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM4 Device Series
+ * @version  V5.00
+ * @date     08. April 2016
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if defined (ARMCM4)
+  #include "ARMCM4.h"
+#elif defined (ARMCM4_FP)
+  #include "ARMCM4_FP.h"
+#else
+  #error device not specified!
+#endif
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            ( 5000000U)      /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (5 * XTAL)
+
+
+/*----------------------------------------------------------------------------
+  Externals
+ *----------------------------------------------------------------------------*/
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
+  extern uint32_t __Vectors;
+#endif
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
+  SCB->VTOR = (uint32_t) &__Vectors;
+#endif
+
+#if defined (__FPU_USED) && (__FPU_USED == 1)
+  SCB->CPACR |= ((3U << 10*2) |           /* set CP10 Full Access */
+                 (3U << 11*2)  );         /* set CP11 Full Access */
+#endif
+
+#ifdef UNALIGNED_SUPPORT_DISABLE
+  SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk;
+#endif
+
+  SystemCoreClock = SYSTEM_CLOCK;
+}
diff --git a/NN/Examples/ARM/arm_nn_examples/cifar10/RTE/Device/ARMCM7_SP/gcc_arm.ld b/NN/Examples/ARM/arm_nn_examples/cifar10/RTE/Device/ARMCM7_SP/gcc_arm.ld
new file mode 100644
index 0000000..b987fd1
--- /dev/null
+++ b/NN/Examples/ARM/arm_nn_examples/cifar10/RTE/Device/ARMCM7_SP/gcc_arm.ld
@@ -0,0 +1,196 @@
+/* Linker script to configure memory regions. */
+MEMORY
+{
+  FLASH (rx)  : ORIGIN = 0x00000000, LENGTH = 512K
+  RAM   (rwx) : ORIGIN = 0x20000000, LENGTH = 256K
+}
+
+/* Library configurations */
+GROUP(libgcc.a libc.a libm.a libnosys.a)
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ *   Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ *   __exidx_start
+ *   __exidx_end
+ *   __copy_table_start__
+ *   __copy_table_end__
+ *   __zero_table_start__
+ *   __zero_table_end__
+ *   __etext
+ *   __data_start__
+ *   __preinit_array_start
+ *   __preinit_array_end
+ *   __init_array_start
+ *   __init_array_end
+ *   __fini_array_start
+ *   __fini_array_end
+ *   __data_end__
+ *   __bss_start__
+ *   __bss_end__
+ *   __end__
+ *   end
+ *   __HeapBase
+ *   __HeapLimit
+ *   __StackLimit
+ *   __StackTop
+ *   __stack
+ *   __Vectors_End
+ *   __Vectors_Size
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+	.text :
+	{
+		KEEP(*(.vectors))
+		__Vectors_End = .;
+		__Vectors_Size = __Vectors_End - __Vectors;
+		__end__ = .;
+
+		*(.text*)
+
+		KEEP(*(.init))
+		KEEP(*(.fini))
+
+		/* .ctors */
+		*crtbegin.o(.ctors)
+		*crtbegin?.o(.ctors)
+		*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+		*(SORT(.ctors.*))
+		*(.ctors)
+
+		/* .dtors */
+ 		*crtbegin.o(.dtors)
+ 		*crtbegin?.o(.dtors)
+ 		*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ 		*(SORT(.dtors.*))
+ 		*(.dtors)
+
+		*(.rodata*)
+
+		KEEP(*(.eh_frame*))
+	} > FLASH
+
+	.ARM.extab :
+	{
+		*(.ARM.extab* .gnu.linkonce.armextab.*)
+	} > FLASH
+
+	__exidx_start = .;
+	.ARM.exidx :
+	{
+		*(.ARM.exidx* .gnu.linkonce.armexidx.*)
+	} > FLASH
+	__exidx_end = .;
+
+	/* To copy multiple ROM to RAM sections,
+	 * uncomment .copy.table section and,
+	 * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */
+	/*
+	.copy.table :
+	{
+		. = ALIGN(4);
+		__copy_table_start__ = .;
+		LONG (__etext)
+		LONG (__data_start__)
+		LONG (__data_end__ - __data_start__)
+		LONG (__etext2)
+		LONG (__data2_start__)
+		LONG (__data2_end__ - __data2_start__)
+		__copy_table_end__ = .;
+	} > FLASH
+	*/
+
+	/* To clear multiple BSS sections,
+	 * uncomment .zero.table section and,
+	 * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */
+	/*
+	.zero.table :
+	{
+		. = ALIGN(4);
+		__zero_table_start__ = .;
+		LONG (__bss_start__)
+		LONG (__bss_end__ - __bss_start__)
+		LONG (__bss2_start__)
+		LONG (__bss2_end__ - __bss2_start__)
+		__zero_table_end__ = .;
+	} > FLASH
+	*/
+
+	__etext = .;
+
+	.data : AT (__etext)
+	{
+		__data_start__ = .;
+		*(vtable)
+		*(.data*)
+
+		. = ALIGN(4);
+		/* preinit data */
+		PROVIDE_HIDDEN (__preinit_array_start = .);
+		KEEP(*(.preinit_array))
+		PROVIDE_HIDDEN (__preinit_array_end = .);
+
+		. = ALIGN(4);
+		/* init data */
+		PROVIDE_HIDDEN (__init_array_start = .);
+		KEEP(*(SORT(.init_array.*)))
+		KEEP(*(.init_array))
+		PROVIDE_HIDDEN (__init_array_end = .);
+
+
+		. = ALIGN(4);
+		/* finit data */
+		PROVIDE_HIDDEN (__fini_array_start = .);
+		KEEP(*(SORT(.fini_array.*)))
+		KEEP(*(.fini_array))
+		PROVIDE_HIDDEN (__fini_array_end = .);
+
+		KEEP(*(.jcr*))
+		. = ALIGN(4);
+		/* All data end */
+		__data_end__ = .;
+
+	} > RAM
+
+	.bss :
+	{
+		. = ALIGN(4);
+		__bss_start__ = .;
+		*(.bss*)
+		*(COMMON)
+		. = ALIGN(4);
+		__bss_end__ = .;
+	} > RAM
+
+	.heap (COPY):
+	{
+		__HeapBase = .;
+		__end__ = .;
+		end = __end__;
+		KEEP(*(.heap*))
+		__HeapLimit = .;
+	} > RAM
+
+	/* .stack_dummy section doesn't contains any symbols. It is only
+	 * used for linker to calculate size of stack sections, and assign
+	 * values to stack symbols later */
+	.stack_dummy (COPY):
+	{
+		KEEP(*(.stack*))
+	} > RAM
+
+	/* Set stack top to end of RAM, and stack limit move down by
+	 * size of stack_dummy section */
+	__StackTop = ORIGIN(RAM) + LENGTH(RAM);
+	__StackLimit = __StackTop - SIZEOF(.stack_dummy);
+	PROVIDE(__stack = __StackTop);
+
+	/* Check if data + heap + stack exceeds RAM limit */
+	ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
diff --git a/NN/Examples/ARM/arm_nn_examples/cifar10/RTE/Device/ARMCM7_SP/startup_ARMCM7.c b/NN/Examples/ARM/arm_nn_examples/cifar10/RTE/Device/ARMCM7_SP/startup_ARMCM7.c
new file mode 100644
index 0000000..26edb9f
--- /dev/null
+++ b/NN/Examples/ARM/arm_nn_examples/cifar10/RTE/Device/ARMCM7_SP/startup_ARMCM7.c
@@ -0,0 +1,295 @@
+/**************************************************************************//**
+ * @file     startup_ARMCM7.s
+ * @brief    CMSIS Core Device Startup File for
+ *           ARMCM7 Device Series
+ * @version  V5.00
+ * @date     26. April 2016
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <stdint.h>
+
+
+/*----------------------------------------------------------------------------
+  Linker generated Symbols
+ *----------------------------------------------------------------------------*/
+extern uint32_t __etext;
+extern uint32_t __data_start__;
+extern uint32_t __data_end__;
+extern uint32_t __copy_table_start__;
+extern uint32_t __copy_table_end__;
+extern uint32_t __zero_table_start__;
+extern uint32_t __zero_table_end__;
+extern uint32_t __bss_start__;
+extern uint32_t __bss_end__;
+extern uint32_t __StackTop;
+
+/*----------------------------------------------------------------------------
+  Exception / Interrupt Handler Function Prototype
+ *----------------------------------------------------------------------------*/
+typedef void( *pFunc )( void );
+
+
+/*----------------------------------------------------------------------------
+  External References
+ *----------------------------------------------------------------------------*/
+#ifndef __START
+extern void  _start(void) __attribute__((noreturn));    /* PreeMain (C library entry point) */
+#else
+extern int  __START(void) __attribute__((noreturn));    /* main entry point */
+#endif
+
+#ifndef __NO_SYSTEM_INIT
+extern void SystemInit (void);            /* CMSIS System Initialization      */
+#endif
+
+
+/*----------------------------------------------------------------------------
+  Internal References
+ *----------------------------------------------------------------------------*/
+void Default_Handler(void);                          /* Default empty handler */
+void Reset_Handler(void);                            /* Reset Handler */
+
+
+/*----------------------------------------------------------------------------
+  User Initial Stack & Heap
+ *----------------------------------------------------------------------------*/
+#ifndef __STACK_SIZE
+  #define	__STACK_SIZE  0x00000400
+#endif
+static uint8_t stack[__STACK_SIZE] __attribute__ ((aligned(8), used, section(".stack")));
+
+#ifndef __HEAP_SIZE
+  #define	__HEAP_SIZE   0x00000C00
+#endif
+#if __HEAP_SIZE > 0
+static uint8_t heap[__HEAP_SIZE]   __attribute__ ((aligned(8), used, section(".heap")));
+#endif
+
+
+/*----------------------------------------------------------------------------
+  Exception / Interrupt Handler
+ *----------------------------------------------------------------------------*/
+/* Cortex-M7 Processor Exceptions */
+void NMI_Handler         (void) __attribute__ ((weak, alias("Default_Handler")));
+void HardFault_Handler   (void) __attribute__ ((weak, alias("Default_Handler")));
+void MemManage_Handler   (void) __attribute__ ((weak, alias("Default_Handler")));
+void BusFault_Handler    (void) __attribute__ ((weak, alias("Default_Handler")));
+void UsageFault_Handler  (void) __attribute__ ((weak, alias("Default_Handler")));
+void SVC_Handler         (void) __attribute__ ((weak, alias("Default_Handler")));
+void DebugMon_Handler    (void) __attribute__ ((weak, alias("Default_Handler")));
+void PendSV_Handler      (void) __attribute__ ((weak, alias("Default_Handler")));
+void SysTick_Handler     (void) __attribute__ ((weak, alias("Default_Handler")));
+
+/* ARMCM7 Specific Interrupts */
+void WDT_IRQHandler      (void) __attribute__ ((weak, alias("Default_Handler")));
+void RTC_IRQHandler      (void) __attribute__ ((weak, alias("Default_Handler")));
+void TIM0_IRQHandler     (void) __attribute__ ((weak, alias("Default_Handler")));
+void TIM2_IRQHandler     (void) __attribute__ ((weak, alias("Default_Handler")));
+void MCIA_IRQHandler     (void) __attribute__ ((weak, alias("Default_Handler")));
+void MCIB_IRQHandler     (void) __attribute__ ((weak, alias("Default_Handler")));
+void UART0_IRQHandler    (void) __attribute__ ((weak, alias("Default_Handler")));
+void UART1_IRQHandler    (void) __attribute__ ((weak, alias("Default_Handler")));
+void UART2_IRQHandler    (void) __attribute__ ((weak, alias("Default_Handler")));
+void UART4_IRQHandler    (void) __attribute__ ((weak, alias("Default_Handler")));
+void AACI_IRQHandler     (void) __attribute__ ((weak, alias("Default_Handler")));
+void CLCD_IRQHandler     (void) __attribute__ ((weak, alias("Default_Handler")));
+void ENET_IRQHandler     (void) __attribute__ ((weak, alias("Default_Handler")));
+void USBDC_IRQHandler    (void) __attribute__ ((weak, alias("Default_Handler")));
+void USBHC_IRQHandler    (void) __attribute__ ((weak, alias("Default_Handler")));
+void CHLCD_IRQHandler    (void) __attribute__ ((weak, alias("Default_Handler")));
+void FLEXRAY_IRQHandler  (void) __attribute__ ((weak, alias("Default_Handler")));
+void CAN_IRQHandler      (void) __attribute__ ((weak, alias("Default_Handler")));
+void LIN_IRQHandler      (void) __attribute__ ((weak, alias("Default_Handler")));
+void I2C_IRQHandler      (void) __attribute__ ((weak, alias("Default_Handler")));
+void CPU_CLCD_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void UART3_IRQHandler    (void) __attribute__ ((weak, alias("Default_Handler")));
+void SPI_IRQHandler      (void) __attribute__ ((weak, alias("Default_Handler")));
+
+
+/*----------------------------------------------------------------------------
+  Exception / Interrupt Vector table
+ *----------------------------------------------------------------------------*/
+const pFunc __Vectors[] __attribute__ ((section(".vectors"))) = {
+  /* Cortex-M7 Exceptions Handler */
+  (pFunc)((uint32_t)&__StackTop),           /*      Initial Stack Pointer     */
+  Reset_Handler,                            /*      Reset Handler             */
+  NMI_Handler,                              /*      NMI Handler               */
+  HardFault_Handler,                        /*      Hard Fault Handler        */
+  MemManage_Handler,                        /*      MPU Fault Handler         */
+  BusFault_Handler,                         /*      Bus Fault Handler         */
+  UsageFault_Handler,                       /*      Usage Fault Handler       */
+  0,                                        /*      Reserved                  */
+  0,                                        /*      Reserved                  */
+  0,                                        /*      Reserved                  */
+  0,                                        /*      Reserved                  */
+  SVC_Handler,                              /*      SVCall Handler            */
+  DebugMon_Handler,                         /*      Debug Monitor Handler     */
+  0,                                        /*      Reserved                  */
+  PendSV_Handler,                           /*      PendSV Handler            */
+  SysTick_Handler,                          /*      SysTick Handler           */
+
+  /* External interrupts */
+  WDT_IRQHandler,                           /*  0:  Watchdog Timer            */
+  RTC_IRQHandler,                           /*  1:  Real Time Clock           */
+  TIM0_IRQHandler,                          /*  2:  Timer0 / Timer1           */
+  TIM2_IRQHandler,                          /*  3:  Timer2 / Timer3           */
+  MCIA_IRQHandler,                          /*  4:  MCIa                      */
+  MCIB_IRQHandler,                          /*  5:  MCIb                      */
+  UART0_IRQHandler,                         /*  6:  UART0 - DUT FPGA          */
+  UART1_IRQHandler,                         /*  7:  UART1 - DUT FPGA          */
+  UART2_IRQHandler,                         /*  8:  UART2 - DUT FPGA          */
+  UART4_IRQHandler,                         /*  9:  UART4 - not connected     */
+  AACI_IRQHandler,                          /* 10: AACI / AC97                */
+  CLCD_IRQHandler,                          /* 11: CLCD Combined Interrupt    */
+  ENET_IRQHandler,                          /* 12: Ethernet                   */
+  USBDC_IRQHandler,                         /* 13: USB Device                 */
+  USBHC_IRQHandler,                         /* 14: USB Host Controller        */
+  CHLCD_IRQHandler,                         /* 15: Character LCD              */
+  FLEXRAY_IRQHandler,                       /* 16: Flexray                    */
+  CAN_IRQHandler,                           /* 17: CAN                        */
+  LIN_IRQHandler,                           /* 18: LIN                        */
+  I2C_IRQHandler,                           /* 19: I2C ADC/DAC                */
+  0,                                        /* 20: Reserved                   */
+  0,                                        /* 21: Reserved                   */
+  0,                                        /* 22: Reserved                   */
+  0,                                        /* 23: Reserved                   */
+  0,                                        /* 24: Reserved                   */
+  0,                                        /* 25: Reserved                   */
+  0,                                        /* 26: Reserved                   */
+  0,                                        /* 27: Reserved                   */
+  CPU_CLCD_IRQHandler,                      /* 28: Reserved - CPU FPGA CLCD   */
+  0,                                        /* 29: Reserved - CPU FPGA        */
+  UART3_IRQHandler,                         /* 30: UART3    - CPU FPGA        */
+  SPI_IRQHandler                            /* 31: SPI Touchscreen - CPU FPGA */
+};
+
+
+/*----------------------------------------------------------------------------
+  Reset Handler called on controller reset
+ *----------------------------------------------------------------------------*/
+void Reset_Handler(void) {
+  uint32_t *pSrc, *pDest;
+  uint32_t *pTable __attribute__((unused));
+
+/*  Firstly it copies data from read only memory to RAM. There are two schemes
+ *  to copy. One can copy more than one sections. Another can only copy
+ *  one section.  The former scheme needs more instructions and read-only
+ *  data to implement than the latter.
+ *  Macro __STARTUP_COPY_MULTIPLE is used to choose between two schemes.  */
+
+#ifdef __STARTUP_COPY_MULTIPLE
+/*  Multiple sections scheme.
+ *
+ *  Between symbol address __copy_table_start__ and __copy_table_end__,
+ *  there are array of triplets, each of which specify:
+ *    offset 0: LMA of start of a section to copy from
+ *    offset 4: VMA of start of a section to copy to
+ *    offset 8: size of the section to copy. Must be multiply of 4
+ *
+ *  All addresses must be aligned to 4 bytes boundary.
+ */
+  pTable = &__copy_table_start__;
+
+  for (; pTable < &__copy_table_end__; pTable = pTable + 3) {
+		pSrc  = (uint32_t*)*(pTable + 0);
+		pDest = (uint32_t*)*(pTable + 1);
+		for (; pDest < (uint32_t*)(*(pTable + 1) + *(pTable + 2)) ; ) {
+      *pDest++ = *pSrc++;
+		}
+	}
+#else
+/*  Single section scheme.
+ *
+ *  The ranges of copy from/to are specified by following symbols
+ *    __etext: LMA of start of the section to copy from. Usually end of text
+ *    __data_start__: VMA of start of the section to copy to
+ *    __data_end__: VMA of end of the section to copy to
+ *
+ *  All addresses must be aligned to 4 bytes boundary.
+ */
+  pSrc  = &__etext;
+  pDest = &__data_start__;
+
+  for ( ; pDest < &__data_end__ ; ) {
+    *pDest++ = *pSrc++;
+  }
+#endif /*__STARTUP_COPY_MULTIPLE */
+
+/*  This part of work usually is done in C library startup code. Otherwise,
+ *  define this macro to enable it in this startup.
+ *
+ *  There are two schemes too. One can clear multiple BSS sections. Another
+ *  can only clear one section. The former is more size expensive than the
+ *  latter.
+ *
+ *  Define macro __STARTUP_CLEAR_BSS_MULTIPLE to choose the former.
+ *  Otherwise efine macro __STARTUP_CLEAR_BSS to choose the later.
+ */
+#ifdef __STARTUP_CLEAR_BSS_MULTIPLE
+/*  Multiple sections scheme.
+ *
+ *  Between symbol address __copy_table_start__ and __copy_table_end__,
+ *  there are array of tuples specifying:
+ *    offset 0: Start of a BSS section
+ *    offset 4: Size of this BSS section. Must be multiply of 4
+ */
+  pTable = &__zero_table_start__;
+
+  for (; pTable < &__zero_table_end__; pTable = pTable + 2) {
+		pDest = (uint32_t*)*(pTable + 0);
+		for (; pDest < (uint32_t*)(*(pTable + 0) + *(pTable + 1)) ; ) {
+      *pDest++ = 0;
+		}
+	}
+#elif defined (__STARTUP_CLEAR_BSS)
+/*  Single BSS section scheme.
+ *
+ *  The BSS section is specified by following symbols
+ *    __bss_start__: start of the BSS section.
+ *    __bss_end__: end of the BSS section.
+ *
+ *  Both addresses must be aligned to 4 bytes boundary.
+ */
+  pDest = &__bss_start__;
+
+  for ( ; pDest < &__bss_end__ ; ) {
+    *pDest++ = 0UL;
+  }
+#endif /* __STARTUP_CLEAR_BSS_MULTIPLE || __STARTUP_CLEAR_BSS */
+
+#ifndef __NO_SYSTEM_INIT
+	SystemInit();
+#endif
+
+#ifndef __START
+#define __START _start
+#endif
+	__START();
+
+}
+
+
+/*----------------------------------------------------------------------------
+  Default Handler for Exceptions / Interrupts
+ *----------------------------------------------------------------------------*/
+void Default_Handler(void) {
+
+	while(1);
+}
diff --git a/NN/Examples/ARM/arm_nn_examples/cifar10/RTE/Device/ARMCM7_SP/startup_ARMCM7.s b/NN/Examples/ARM/arm_nn_examples/cifar10/RTE/Device/ARMCM7_SP/startup_ARMCM7.s
new file mode 100644
index 0000000..b69f038
--- /dev/null
+++ b/NN/Examples/ARM/arm_nn_examples/cifar10/RTE/Device/ARMCM7_SP/startup_ARMCM7.s
@@ -0,0 +1,262 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM7.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM7 Device Series
+; * @version  V5.00
+; * @date     02. March 2016
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;/*
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+;*/
+
+
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000C00
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp              ; Top of Stack
+                DCD     Reset_Handler             ; Reset Handler
+                DCD     NMI_Handler               ; NMI Handler
+                DCD     HardFault_Handler         ; Hard Fault Handler
+                DCD     MemManage_Handler         ; MPU Fault Handler
+                DCD     BusFault_Handler          ; Bus Fault Handler
+                DCD     UsageFault_Handler        ; Usage Fault Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     SVC_Handler               ; SVCall Handler
+                DCD     DebugMon_Handler          ; Debug Monitor Handler
+                DCD     0                         ; Reserved
+                DCD     PendSV_Handler            ; PendSV Handler
+                DCD     SysTick_Handler           ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WDT_IRQHandler            ;  0:  Watchdog Timer
+                DCD     RTC_IRQHandler            ;  1:  Real Time Clock
+                DCD     TIM0_IRQHandler           ;  2:  Timer0 / Timer1
+                DCD     TIM2_IRQHandler           ;  3:  Timer2 / Timer3
+                DCD     MCIA_IRQHandler           ;  4:  MCIa
+                DCD     MCIB_IRQHandler           ;  5:  MCIb
+                DCD     UART0_IRQHandler          ;  6:  UART0 - DUT FPGA
+                DCD     UART1_IRQHandler          ;  7:  UART1 - DUT FPGA
+                DCD     UART2_IRQHandler          ;  8:  UART2 - DUT FPGA
+                DCD     UART4_IRQHandler          ;  9:  UART4 - not connected
+                DCD     AACI_IRQHandler           ; 10: AACI / AC97
+                DCD     CLCD_IRQHandler           ; 11: CLCD Combined Interrupt
+                DCD     ENET_IRQHandler           ; 12: Ethernet
+                DCD     USBDC_IRQHandler          ; 13: USB Device
+                DCD     USBHC_IRQHandler          ; 14: USB Host Controller
+                DCD     CHLCD_IRQHandler          ; 15: Character LCD
+                DCD     FLEXRAY_IRQHandler        ; 16: Flexray
+                DCD     CAN_IRQHandler            ; 17: CAN
+                DCD     LIN_IRQHandler            ; 18: LIN
+                DCD     I2C_IRQHandler            ; 19: I2C ADC/DAC
+                DCD     0                         ; 20: Reserved
+                DCD     0                         ; 21: Reserved
+                DCD     0                         ; 22: Reserved
+                DCD     0                         ; 23: Reserved
+                DCD     0                         ; 24: Reserved
+                DCD     0                         ; 25: Reserved
+                DCD     0                         ; 26: Reserved
+                DCD     0                         ; 27: Reserved
+                DCD     CPU_CLCD_IRQHandler       ; 28: Reserved - CPU FPGA CLCD
+                DCD     0                         ; 29: Reserved - CPU FPGA
+                DCD     UART3_IRQHandler          ; 30: UART3    - CPU FPGA
+                DCD     SPI_IRQHandler            ; 31: SPI Touchscreen - CPU FPGA
+__Vectors_End
+
+__Vectors_Size  EQU     __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT  Reset_Handler             [WEAK]
+                IMPORT  SystemInit
+                IMPORT  __main
+                LDR     R0, =SystemInit
+                BLX     R0
+                LDR     R0, =__main
+                BX      R0
+                ENDP
+
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler               [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler         [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler         [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler          [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler        [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler               [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler          [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler            [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler           [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WDT_IRQHandler            [WEAK]
+                EXPORT  RTC_IRQHandler            [WEAK]
+                EXPORT  TIM0_IRQHandler           [WEAK]
+                EXPORT  TIM2_IRQHandler           [WEAK]
+                EXPORT  MCIA_IRQHandler           [WEAK]
+                EXPORT  MCIB_IRQHandler           [WEAK]
+                EXPORT  UART0_IRQHandler          [WEAK]
+                EXPORT  UART1_IRQHandler          [WEAK]
+                EXPORT  UART2_IRQHandler          [WEAK]
+                EXPORT  UART3_IRQHandler          [WEAK]
+                EXPORT  UART4_IRQHandler          [WEAK]
+                EXPORT  AACI_IRQHandler           [WEAK]
+                EXPORT  CLCD_IRQHandler           [WEAK]
+                EXPORT  ENET_IRQHandler           [WEAK]
+                EXPORT  USBDC_IRQHandler          [WEAK]
+                EXPORT  USBHC_IRQHandler          [WEAK]
+                EXPORT  CHLCD_IRQHandler          [WEAK]
+                EXPORT  FLEXRAY_IRQHandler        [WEAK]
+                EXPORT  CAN_IRQHandler            [WEAK]
+                EXPORT  LIN_IRQHandler            [WEAK]
+                EXPORT  I2C_IRQHandler            [WEAK]
+                EXPORT  CPU_CLCD_IRQHandler       [WEAK]
+                EXPORT  SPI_IRQHandler            [WEAK]
+
+WDT_IRQHandler
+RTC_IRQHandler
+TIM0_IRQHandler
+TIM2_IRQHandler
+MCIA_IRQHandler
+MCIB_IRQHandler
+UART0_IRQHandler
+UART1_IRQHandler
+UART2_IRQHandler
+UART3_IRQHandler
+UART4_IRQHandler
+AACI_IRQHandler
+CLCD_IRQHandler
+ENET_IRQHandler
+USBDC_IRQHandler
+USBHC_IRQHandler
+CHLCD_IRQHandler
+FLEXRAY_IRQHandler
+CAN_IRQHandler
+LIN_IRQHandler
+I2C_IRQHandler
+CPU_CLCD_IRQHandler
+SPI_IRQHandler
+                B       .
+
+                ENDP
+
+
+                ALIGN
+
+
+; User Initial Stack & Heap
+
+                IF      :DEF:__MICROLIB
+
+                EXPORT  __initial_sp
+                EXPORT  __heap_base
+                EXPORT  __heap_limit
+
+                ELSE
+
+                IMPORT  __use_two_region_memory
+                EXPORT  __user_initial_stackheap
+
+__user_initial_stackheap PROC
+                LDR     R0, =  Heap_Mem
+                LDR     R1, =(Stack_Mem + Stack_Size)
+                LDR     R2, = (Heap_Mem +  Heap_Size)
+                LDR     R3, = Stack_Mem
+                BX      LR
+                ENDP
+
+                ALIGN
+
+                ENDIF
+
+
+                END
diff --git a/NN/Examples/ARM/arm_nn_examples/cifar10/RTE/Device/ARMCM7_SP/system_ARMCM7.c b/NN/Examples/ARM/arm_nn_examples/cifar10/RTE/Device/ARMCM7_SP/system_ARMCM7.c
new file mode 100644
index 0000000..65bfaca
--- /dev/null
+++ b/NN/Examples/ARM/arm_nn_examples/cifar10/RTE/Device/ARMCM7_SP/system_ARMCM7.c
@@ -0,0 +1,85 @@
+/**************************************************************************//**
+ * @file     system_ARMCM7.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM7 Device Series
+ * @version  V5.00
+ * @date     08. April 2016
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if defined (ARMCM7)
+  #include "ARMCM7.h"
+#elif defined (ARMCM7_SP)
+  #include "ARMCM7_SP.h"
+#elif defined (ARMCM7_DP)
+  #include "ARMCM7_DP.h"
+#else
+  #error device not specified!
+#endif
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            ( 5000000U)      /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (5 * XTAL)
+
+
+/*----------------------------------------------------------------------------
+  Externals
+ *----------------------------------------------------------------------------*/
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
+  extern uint32_t __Vectors;
+#endif
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
+  SCB->VTOR = (uint32_t) &__Vectors;
+#endif
+
+#if defined (__FPU_USED) && (__FPU_USED == 1)
+  SCB->CPACR |= ((3U << 10*2) |           /* set CP10 Full Access */
+                 (3U << 11*2)  );         /* set CP11 Full Access */
+#endif
+
+#ifdef UNALIGNED_SUPPORT_DISABLE
+  SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk;
+#endif
+
+  SystemCoreClock = SYSTEM_CLOCK;
+}
diff --git a/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM0/startup_ARMCM0.s b/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM0/startup_ARMCM0.s
new file mode 100644
index 0000000..9fc447d
--- /dev/null
+++ b/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM0/startup_ARMCM0.s
@@ -0,0 +1,242 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM0.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM0 Device Series
+; * @version  V5.00
+; * @date     02. March 2016
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;/*
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+;*/
+
+
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000C00
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp              ; Top of Stack
+                DCD     Reset_Handler             ; Reset Handler
+                DCD     NMI_Handler               ; NMI Handler
+                DCD     HardFault_Handler         ; Hard Fault Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     SVC_Handler               ; SVCall Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     PendSV_Handler            ; PendSV Handler
+                DCD     SysTick_Handler           ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WDT_IRQHandler            ;  0:  Watchdog Timer
+                DCD     RTC_IRQHandler            ;  1:  Real Time Clock
+                DCD     TIM0_IRQHandler           ;  2:  Timer0 / Timer1
+                DCD     TIM2_IRQHandler           ;  3:  Timer2 / Timer3
+                DCD     MCIA_IRQHandler           ;  4:  MCIa
+                DCD     MCIB_IRQHandler           ;  5:  MCIb
+                DCD     UART0_IRQHandler          ;  6:  UART0 - DUT FPGA
+                DCD     UART1_IRQHandler          ;  7:  UART1 - DUT FPGA
+                DCD     UART2_IRQHandler          ;  8:  UART2 - DUT FPGA
+                DCD     UART4_IRQHandler          ;  9:  UART4 - not connected
+                DCD     AACI_IRQHandler           ; 10: AACI / AC97
+                DCD     CLCD_IRQHandler           ; 11: CLCD Combined Interrupt
+                DCD     ENET_IRQHandler           ; 12: Ethernet
+                DCD     USBDC_IRQHandler          ; 13: USB Device
+                DCD     USBHC_IRQHandler          ; 14: USB Host Controller
+                DCD     CHLCD_IRQHandler          ; 15: Character LCD
+                DCD     FLEXRAY_IRQHandler        ; 16: Flexray
+                DCD     CAN_IRQHandler            ; 17: CAN
+                DCD     LIN_IRQHandler            ; 18: LIN
+                DCD     I2C_IRQHandler            ; 19: I2C ADC/DAC
+                DCD     0                         ; 20: Reserved
+                DCD     0                         ; 21: Reserved
+                DCD     0                         ; 22: Reserved
+                DCD     0                         ; 23: Reserved
+                DCD     0                         ; 24: Reserved
+                DCD     0                         ; 25: Reserved
+                DCD     0                         ; 26: Reserved
+                DCD     0                         ; 27: Reserved
+                DCD     CPU_CLCD_IRQHandler       ; 28: Reserved - CPU FPGA CLCD
+                DCD     0                         ; 29: Reserved - CPU FPGA
+                DCD     UART3_IRQHandler          ; 30: UART3    - CPU FPGA
+                DCD     SPI_IRQHandler            ; 31: SPI Touchscreen - CPU FPGA
+__Vectors_End
+
+__Vectors_Size  EQU     __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT  Reset_Handler             [WEAK]
+                IMPORT  SystemInit
+                IMPORT  __main
+                LDR     R0, =SystemInit
+                BLX     R0
+                LDR     R0, =__main
+                BX      R0
+                ENDP
+
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler               [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler         [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler               [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler            [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler           [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WDT_IRQHandler            [WEAK]
+                EXPORT  RTC_IRQHandler            [WEAK]
+                EXPORT  TIM0_IRQHandler           [WEAK]
+                EXPORT  TIM2_IRQHandler           [WEAK]
+                EXPORT  MCIA_IRQHandler           [WEAK]
+                EXPORT  MCIB_IRQHandler           [WEAK]
+                EXPORT  UART0_IRQHandler          [WEAK]
+                EXPORT  UART1_IRQHandler          [WEAK]
+                EXPORT  UART2_IRQHandler          [WEAK]
+                EXPORT  UART3_IRQHandler          [WEAK]
+                EXPORT  UART4_IRQHandler          [WEAK]
+                EXPORT  AACI_IRQHandler           [WEAK]
+                EXPORT  CLCD_IRQHandler           [WEAK]
+                EXPORT  ENET_IRQHandler           [WEAK]
+                EXPORT  USBDC_IRQHandler          [WEAK]
+                EXPORT  USBHC_IRQHandler          [WEAK]
+                EXPORT  CHLCD_IRQHandler          [WEAK]
+                EXPORT  FLEXRAY_IRQHandler        [WEAK]
+                EXPORT  CAN_IRQHandler            [WEAK]
+                EXPORT  LIN_IRQHandler            [WEAK]
+                EXPORT  I2C_IRQHandler            [WEAK]
+                EXPORT  CPU_CLCD_IRQHandler       [WEAK]
+                EXPORT  SPI_IRQHandler            [WEAK]
+
+WDT_IRQHandler
+RTC_IRQHandler
+TIM0_IRQHandler
+TIM2_IRQHandler
+MCIA_IRQHandler
+MCIB_IRQHandler
+UART0_IRQHandler
+UART1_IRQHandler
+UART2_IRQHandler
+UART3_IRQHandler
+UART4_IRQHandler
+AACI_IRQHandler
+CLCD_IRQHandler
+ENET_IRQHandler
+USBDC_IRQHandler
+USBHC_IRQHandler
+CHLCD_IRQHandler
+FLEXRAY_IRQHandler
+CAN_IRQHandler
+LIN_IRQHandler
+I2C_IRQHandler
+CPU_CLCD_IRQHandler
+SPI_IRQHandler
+                B       .
+
+                ENDP
+
+
+                ALIGN
+
+
+; User Initial Stack & Heap
+
+                IF      :DEF:__MICROLIB
+
+                EXPORT  __initial_sp
+                EXPORT  __heap_base
+                EXPORT  __heap_limit
+
+                ELSE
+
+                IMPORT  __use_two_region_memory
+                EXPORT  __user_initial_stackheap
+
+__user_initial_stackheap PROC
+                LDR     R0, =  Heap_Mem
+                LDR     R1, =(Stack_Mem + Stack_Size)
+                LDR     R2, = (Heap_Mem +  Heap_Size)
+                LDR     R3, = Stack_Mem
+                BX      LR
+                ENDP
+
+                ALIGN
+
+                ENDIF
+
+
+                END
diff --git a/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM0/system_ARMCM0.c b/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM0/system_ARMCM0.c
new file mode 100644
index 0000000..66829ad
--- /dev/null
+++ b/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM0/system_ARMCM0.c
@@ -0,0 +1,56 @@
+/**************************************************************************//**
+ * @file     system_ARMCM0.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM0 Device Series
+ * @version  V5.00
+ * @date     08. April 2016
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "ARMCM0.h"
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            ( 5000000U)      /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (5 * XTAL)
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
diff --git a/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM3/startup_ARMCM3.s b/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM3/startup_ARMCM3.s
new file mode 100644
index 0000000..16e56b0
--- /dev/null
+++ b/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM3/startup_ARMCM3.s
@@ -0,0 +1,262 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM3.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM3 Device Series
+; * @version  V5.00
+; * @date     02. March 2016
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;/*
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+;*/
+
+
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000C00
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp              ; Top of Stack
+                DCD     Reset_Handler             ; Reset Handler
+                DCD     NMI_Handler               ; NMI Handler
+                DCD     HardFault_Handler         ; Hard Fault Handler
+                DCD     MemManage_Handler         ; MPU Fault Handler
+                DCD     BusFault_Handler          ; Bus Fault Handler
+                DCD     UsageFault_Handler        ; Usage Fault Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     SVC_Handler               ; SVCall Handler
+                DCD     DebugMon_Handler          ; Debug Monitor Handler
+                DCD     0                         ; Reserved
+                DCD     PendSV_Handler            ; PendSV Handler
+                DCD     SysTick_Handler           ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WDT_IRQHandler            ;  0:  Watchdog Timer
+                DCD     RTC_IRQHandler            ;  1:  Real Time Clock
+                DCD     TIM0_IRQHandler           ;  2:  Timer0 / Timer1
+                DCD     TIM2_IRQHandler           ;  3:  Timer2 / Timer3
+                DCD     MCIA_IRQHandler           ;  4:  MCIa
+                DCD     MCIB_IRQHandler           ;  5:  MCIb
+                DCD     UART0_IRQHandler          ;  6:  UART0 - DUT FPGA
+                DCD     UART1_IRQHandler          ;  7:  UART1 - DUT FPGA
+                DCD     UART2_IRQHandler          ;  8:  UART2 - DUT FPGA
+                DCD     UART4_IRQHandler          ;  9:  UART4 - not connected
+                DCD     AACI_IRQHandler           ; 10: AACI / AC97
+                DCD     CLCD_IRQHandler           ; 11: CLCD Combined Interrupt
+                DCD     ENET_IRQHandler           ; 12: Ethernet
+                DCD     USBDC_IRQHandler          ; 13: USB Device
+                DCD     USBHC_IRQHandler          ; 14: USB Host Controller
+                DCD     CHLCD_IRQHandler          ; 15: Character LCD
+                DCD     FLEXRAY_IRQHandler        ; 16: Flexray
+                DCD     CAN_IRQHandler            ; 17: CAN
+                DCD     LIN_IRQHandler            ; 18: LIN
+                DCD     I2C_IRQHandler            ; 19: I2C ADC/DAC
+                DCD     0                         ; 20: Reserved
+                DCD     0                         ; 21: Reserved
+                DCD     0                         ; 22: Reserved
+                DCD     0                         ; 23: Reserved
+                DCD     0                         ; 24: Reserved
+                DCD     0                         ; 25: Reserved
+                DCD     0                         ; 26: Reserved
+                DCD     0                         ; 27: Reserved
+                DCD     CPU_CLCD_IRQHandler       ; 28: Reserved - CPU FPGA CLCD
+                DCD     0                         ; 29: Reserved - CPU FPGA
+                DCD     UART3_IRQHandler          ; 30: UART3    - CPU FPGA
+                DCD     SPI_IRQHandler            ; 31: SPI Touchscreen - CPU FPGA
+__Vectors_End
+
+__Vectors_Size  EQU     __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT  Reset_Handler             [WEAK]
+                IMPORT  SystemInit
+                IMPORT  __main
+                LDR     R0, =SystemInit
+                BLX     R0
+                LDR     R0, =__main
+                BX      R0
+                ENDP
+
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler               [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler         [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler         [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler          [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler        [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler               [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler          [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler            [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler           [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WDT_IRQHandler            [WEAK]
+                EXPORT  RTC_IRQHandler            [WEAK]
+                EXPORT  TIM0_IRQHandler           [WEAK]
+                EXPORT  TIM2_IRQHandler           [WEAK]
+                EXPORT  MCIA_IRQHandler           [WEAK]
+                EXPORT  MCIB_IRQHandler           [WEAK]
+                EXPORT  UART0_IRQHandler          [WEAK]
+                EXPORT  UART1_IRQHandler          [WEAK]
+                EXPORT  UART2_IRQHandler          [WEAK]
+                EXPORT  UART3_IRQHandler          [WEAK]
+                EXPORT  UART4_IRQHandler          [WEAK]
+                EXPORT  AACI_IRQHandler           [WEAK]
+                EXPORT  CLCD_IRQHandler           [WEAK]
+                EXPORT  ENET_IRQHandler           [WEAK]
+                EXPORT  USBDC_IRQHandler          [WEAK]
+                EXPORT  USBHC_IRQHandler          [WEAK]
+                EXPORT  CHLCD_IRQHandler          [WEAK]
+                EXPORT  FLEXRAY_IRQHandler        [WEAK]
+                EXPORT  CAN_IRQHandler            [WEAK]
+                EXPORT  LIN_IRQHandler            [WEAK]
+                EXPORT  I2C_IRQHandler            [WEAK]
+                EXPORT  CPU_CLCD_IRQHandler       [WEAK]
+                EXPORT  SPI_IRQHandler            [WEAK]
+
+WDT_IRQHandler
+RTC_IRQHandler
+TIM0_IRQHandler
+TIM2_IRQHandler
+MCIA_IRQHandler
+MCIB_IRQHandler
+UART0_IRQHandler
+UART1_IRQHandler
+UART2_IRQHandler
+UART3_IRQHandler
+UART4_IRQHandler
+AACI_IRQHandler
+CLCD_IRQHandler
+ENET_IRQHandler
+USBDC_IRQHandler
+USBHC_IRQHandler
+CHLCD_IRQHandler
+FLEXRAY_IRQHandler
+CAN_IRQHandler
+LIN_IRQHandler
+I2C_IRQHandler
+CPU_CLCD_IRQHandler
+SPI_IRQHandler
+                B       .
+
+                ENDP
+
+
+                ALIGN
+
+
+; User Initial Stack & Heap
+
+                IF      :DEF:__MICROLIB
+
+                EXPORT  __initial_sp
+                EXPORT  __heap_base
+                EXPORT  __heap_limit
+
+                ELSE
+
+                IMPORT  __use_two_region_memory
+                EXPORT  __user_initial_stackheap
+
+__user_initial_stackheap PROC
+                LDR     R0, =  Heap_Mem
+                LDR     R1, =(Stack_Mem + Stack_Size)
+                LDR     R2, = (Heap_Mem +  Heap_Size)
+                LDR     R3, = Stack_Mem
+                BX      LR
+                ENDP
+
+                ALIGN
+
+                ENDIF
+
+
+                END
diff --git a/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM3/system_ARMCM3.c b/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM3/system_ARMCM3.c
new file mode 100644
index 0000000..f08df7a
--- /dev/null
+++ b/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM3/system_ARMCM3.c
@@ -0,0 +1,68 @@
+/**************************************************************************//**
+ * @file     system_ARMCM3.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM3 Device Series
+ * @version  V5.00
+ * @date     08. April 2016
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "ARMCM3.h"
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            ( 5000000U)      /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (5 * XTAL)
+
+
+/*----------------------------------------------------------------------------
+  Externals
+ *----------------------------------------------------------------------------*/
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
+  extern uint32_t __Vectors;
+#endif
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
+  SCB->VTOR = (uint32_t) &__Vectors;
+#endif
+
+  SystemCoreClock = SYSTEM_CLOCK;
+}
diff --git a/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM4_FP/startup_ARMCM4.s b/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM4_FP/startup_ARMCM4.s
new file mode 100644
index 0000000..dae6439
--- /dev/null
+++ b/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM4_FP/startup_ARMCM4.s
@@ -0,0 +1,262 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM4.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM4 Device Series
+; * @version  V5.00
+; * @date     02. March 2016
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;/*
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+;*/
+
+
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000C00
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp              ; Top of Stack
+                DCD     Reset_Handler             ; Reset Handler
+                DCD     NMI_Handler               ; NMI Handler
+                DCD     HardFault_Handler         ; Hard Fault Handler
+                DCD     MemManage_Handler         ; MPU Fault Handler
+                DCD     BusFault_Handler          ; Bus Fault Handler
+                DCD     UsageFault_Handler        ; Usage Fault Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     SVC_Handler               ; SVCall Handler
+                DCD     DebugMon_Handler          ; Debug Monitor Handler
+                DCD     0                         ; Reserved
+                DCD     PendSV_Handler            ; PendSV Handler
+                DCD     SysTick_Handler           ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WDT_IRQHandler            ;  0:  Watchdog Timer
+                DCD     RTC_IRQHandler            ;  1:  Real Time Clock
+                DCD     TIM0_IRQHandler           ;  2:  Timer0 / Timer1
+                DCD     TIM2_IRQHandler           ;  3:  Timer2 / Timer3
+                DCD     MCIA_IRQHandler           ;  4:  MCIa
+                DCD     MCIB_IRQHandler           ;  5:  MCIb
+                DCD     UART0_IRQHandler          ;  6:  UART0 - DUT FPGA
+                DCD     UART1_IRQHandler          ;  7:  UART1 - DUT FPGA
+                DCD     UART2_IRQHandler          ;  8:  UART2 - DUT FPGA
+                DCD     UART4_IRQHandler          ;  9:  UART4 - not connected
+                DCD     AACI_IRQHandler           ; 10: AACI / AC97
+                DCD     CLCD_IRQHandler           ; 11: CLCD Combined Interrupt
+                DCD     ENET_IRQHandler           ; 12: Ethernet
+                DCD     USBDC_IRQHandler          ; 13: USB Device
+                DCD     USBHC_IRQHandler          ; 14: USB Host Controller
+                DCD     CHLCD_IRQHandler          ; 15: Character LCD
+                DCD     FLEXRAY_IRQHandler        ; 16: Flexray
+                DCD     CAN_IRQHandler            ; 17: CAN
+                DCD     LIN_IRQHandler            ; 18: LIN
+                DCD     I2C_IRQHandler            ; 19: I2C ADC/DAC
+                DCD     0                         ; 20: Reserved
+                DCD     0                         ; 21: Reserved
+                DCD     0                         ; 22: Reserved
+                DCD     0                         ; 23: Reserved
+                DCD     0                         ; 24: Reserved
+                DCD     0                         ; 25: Reserved
+                DCD     0                         ; 26: Reserved
+                DCD     0                         ; 27: Reserved
+                DCD     CPU_CLCD_IRQHandler       ; 28: Reserved - CPU FPGA CLCD
+                DCD     0                         ; 29: Reserved - CPU FPGA
+                DCD     UART3_IRQHandler          ; 30: UART3    - CPU FPGA
+                DCD     SPI_IRQHandler            ; 31: SPI Touchscreen - CPU FPGA
+__Vectors_End
+
+__Vectors_Size  EQU     __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT  Reset_Handler             [WEAK]
+                IMPORT  SystemInit
+                IMPORT  __main
+                LDR     R0, =SystemInit
+                BLX     R0
+                LDR     R0, =__main
+                BX      R0
+                ENDP
+
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler               [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler         [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler         [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler          [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler        [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler               [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler          [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler            [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler           [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WDT_IRQHandler            [WEAK]
+                EXPORT  RTC_IRQHandler            [WEAK]
+                EXPORT  TIM0_IRQHandler           [WEAK]
+                EXPORT  TIM2_IRQHandler           [WEAK]
+                EXPORT  MCIA_IRQHandler           [WEAK]
+                EXPORT  MCIB_IRQHandler           [WEAK]
+                EXPORT  UART0_IRQHandler          [WEAK]
+                EXPORT  UART1_IRQHandler          [WEAK]
+                EXPORT  UART2_IRQHandler          [WEAK]
+                EXPORT  UART3_IRQHandler          [WEAK]
+                EXPORT  UART4_IRQHandler          [WEAK]
+                EXPORT  AACI_IRQHandler           [WEAK]
+                EXPORT  CLCD_IRQHandler           [WEAK]
+                EXPORT  ENET_IRQHandler           [WEAK]
+                EXPORT  USBDC_IRQHandler          [WEAK]
+                EXPORT  USBHC_IRQHandler          [WEAK]
+                EXPORT  CHLCD_IRQHandler          [WEAK]
+                EXPORT  FLEXRAY_IRQHandler        [WEAK]
+                EXPORT  CAN_IRQHandler            [WEAK]
+                EXPORT  LIN_IRQHandler            [WEAK]
+                EXPORT  I2C_IRQHandler            [WEAK]
+                EXPORT  CPU_CLCD_IRQHandler       [WEAK]
+                EXPORT  SPI_IRQHandler            [WEAK]
+
+WDT_IRQHandler
+RTC_IRQHandler
+TIM0_IRQHandler
+TIM2_IRQHandler
+MCIA_IRQHandler
+MCIB_IRQHandler
+UART0_IRQHandler
+UART1_IRQHandler
+UART2_IRQHandler
+UART3_IRQHandler
+UART4_IRQHandler
+AACI_IRQHandler
+CLCD_IRQHandler
+ENET_IRQHandler
+USBDC_IRQHandler
+USBHC_IRQHandler
+CHLCD_IRQHandler
+FLEXRAY_IRQHandler
+CAN_IRQHandler
+LIN_IRQHandler
+I2C_IRQHandler
+CPU_CLCD_IRQHandler
+SPI_IRQHandler
+                B       .
+
+                ENDP
+
+
+                ALIGN
+
+
+; User Initial Stack & Heap
+
+                IF      :DEF:__MICROLIB
+
+                EXPORT  __initial_sp
+                EXPORT  __heap_base
+                EXPORT  __heap_limit
+
+                ELSE
+
+                IMPORT  __use_two_region_memory
+                EXPORT  __user_initial_stackheap
+
+__user_initial_stackheap PROC
+                LDR     R0, =  Heap_Mem
+                LDR     R1, =(Stack_Mem + Stack_Size)
+                LDR     R2, = (Heap_Mem +  Heap_Size)
+                LDR     R3, = Stack_Mem
+                BX      LR
+                ENDP
+
+                ALIGN
+
+                ENDIF
+
+
+                END
diff --git a/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM4_FP/system_ARMCM4.c b/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM4_FP/system_ARMCM4.c
new file mode 100644
index 0000000..070fa1e
--- /dev/null
+++ b/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM4_FP/system_ARMCM4.c
@@ -0,0 +1,83 @@
+/**************************************************************************//**
+ * @file     system_ARMCM4.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM4 Device Series
+ * @version  V5.00
+ * @date     08. April 2016
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if defined (ARMCM4)
+  #include "ARMCM4.h"
+#elif defined (ARMCM4_FP)
+  #include "ARMCM4_FP.h"
+#else
+  #error device not specified!
+#endif
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            ( 5000000U)      /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (5 * XTAL)
+
+
+/*----------------------------------------------------------------------------
+  Externals
+ *----------------------------------------------------------------------------*/
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
+  extern uint32_t __Vectors;
+#endif
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
+  SCB->VTOR = (uint32_t) &__Vectors;
+#endif
+
+#if defined (__FPU_USED) && (__FPU_USED == 1)
+  SCB->CPACR |= ((3U << 10*2) |           /* set CP10 Full Access */
+                 (3U << 11*2)  );         /* set CP11 Full Access */
+#endif
+
+#ifdef UNALIGNED_SUPPORT_DISABLE
+  SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk;
+#endif
+
+  SystemCoreClock = SYSTEM_CLOCK;
+}
diff --git a/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM7_SP/gcc_arm.ld b/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM7_SP/gcc_arm.ld
new file mode 100644
index 0000000..b987fd1
--- /dev/null
+++ b/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM7_SP/gcc_arm.ld
@@ -0,0 +1,196 @@
+/* Linker script to configure memory regions. */
+MEMORY
+{
+  FLASH (rx)  : ORIGIN = 0x00000000, LENGTH = 512K
+  RAM   (rwx) : ORIGIN = 0x20000000, LENGTH = 256K
+}
+
+/* Library configurations */
+GROUP(libgcc.a libc.a libm.a libnosys.a)
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ *   Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ *   __exidx_start
+ *   __exidx_end
+ *   __copy_table_start__
+ *   __copy_table_end__
+ *   __zero_table_start__
+ *   __zero_table_end__
+ *   __etext
+ *   __data_start__
+ *   __preinit_array_start
+ *   __preinit_array_end
+ *   __init_array_start
+ *   __init_array_end
+ *   __fini_array_start
+ *   __fini_array_end
+ *   __data_end__
+ *   __bss_start__
+ *   __bss_end__
+ *   __end__
+ *   end
+ *   __HeapBase
+ *   __HeapLimit
+ *   __StackLimit
+ *   __StackTop
+ *   __stack
+ *   __Vectors_End
+ *   __Vectors_Size
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+	.text :
+	{
+		KEEP(*(.vectors))
+		__Vectors_End = .;
+		__Vectors_Size = __Vectors_End - __Vectors;
+		__end__ = .;
+
+		*(.text*)
+
+		KEEP(*(.init))
+		KEEP(*(.fini))
+
+		/* .ctors */
+		*crtbegin.o(.ctors)
+		*crtbegin?.o(.ctors)
+		*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+		*(SORT(.ctors.*))
+		*(.ctors)
+
+		/* .dtors */
+ 		*crtbegin.o(.dtors)
+ 		*crtbegin?.o(.dtors)
+ 		*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ 		*(SORT(.dtors.*))
+ 		*(.dtors)
+
+		*(.rodata*)
+
+		KEEP(*(.eh_frame*))
+	} > FLASH
+
+	.ARM.extab :
+	{
+		*(.ARM.extab* .gnu.linkonce.armextab.*)
+	} > FLASH
+
+	__exidx_start = .;
+	.ARM.exidx :
+	{
+		*(.ARM.exidx* .gnu.linkonce.armexidx.*)
+	} > FLASH
+	__exidx_end = .;
+
+	/* To copy multiple ROM to RAM sections,
+	 * uncomment .copy.table section and,
+	 * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */
+	/*
+	.copy.table :
+	{
+		. = ALIGN(4);
+		__copy_table_start__ = .;
+		LONG (__etext)
+		LONG (__data_start__)
+		LONG (__data_end__ - __data_start__)
+		LONG (__etext2)
+		LONG (__data2_start__)
+		LONG (__data2_end__ - __data2_start__)
+		__copy_table_end__ = .;
+	} > FLASH
+	*/
+
+	/* To clear multiple BSS sections,
+	 * uncomment .zero.table section and,
+	 * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */
+	/*
+	.zero.table :
+	{
+		. = ALIGN(4);
+		__zero_table_start__ = .;
+		LONG (__bss_start__)
+		LONG (__bss_end__ - __bss_start__)
+		LONG (__bss2_start__)
+		LONG (__bss2_end__ - __bss2_start__)
+		__zero_table_end__ = .;
+	} > FLASH
+	*/
+
+	__etext = .;
+
+	.data : AT (__etext)
+	{
+		__data_start__ = .;
+		*(vtable)
+		*(.data*)
+
+		. = ALIGN(4);
+		/* preinit data */
+		PROVIDE_HIDDEN (__preinit_array_start = .);
+		KEEP(*(.preinit_array))
+		PROVIDE_HIDDEN (__preinit_array_end = .);
+
+		. = ALIGN(4);
+		/* init data */
+		PROVIDE_HIDDEN (__init_array_start = .);
+		KEEP(*(SORT(.init_array.*)))
+		KEEP(*(.init_array))
+		PROVIDE_HIDDEN (__init_array_end = .);
+
+
+		. = ALIGN(4);
+		/* finit data */
+		PROVIDE_HIDDEN (__fini_array_start = .);
+		KEEP(*(SORT(.fini_array.*)))
+		KEEP(*(.fini_array))
+		PROVIDE_HIDDEN (__fini_array_end = .);
+
+		KEEP(*(.jcr*))
+		. = ALIGN(4);
+		/* All data end */
+		__data_end__ = .;
+
+	} > RAM
+
+	.bss :
+	{
+		. = ALIGN(4);
+		__bss_start__ = .;
+		*(.bss*)
+		*(COMMON)
+		. = ALIGN(4);
+		__bss_end__ = .;
+	} > RAM
+
+	.heap (COPY):
+	{
+		__HeapBase = .;
+		__end__ = .;
+		end = __end__;
+		KEEP(*(.heap*))
+		__HeapLimit = .;
+	} > RAM
+
+	/* .stack_dummy section doesn't contains any symbols. It is only
+	 * used for linker to calculate size of stack sections, and assign
+	 * values to stack symbols later */
+	.stack_dummy (COPY):
+	{
+		KEEP(*(.stack*))
+	} > RAM
+
+	/* Set stack top to end of RAM, and stack limit move down by
+	 * size of stack_dummy section */
+	__StackTop = ORIGIN(RAM) + LENGTH(RAM);
+	__StackLimit = __StackTop - SIZEOF(.stack_dummy);
+	PROVIDE(__stack = __StackTop);
+
+	/* Check if data + heap + stack exceeds RAM limit */
+	ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
diff --git a/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM7_SP/startup_ARMCM7.c b/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM7_SP/startup_ARMCM7.c
new file mode 100644
index 0000000..26edb9f
--- /dev/null
+++ b/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM7_SP/startup_ARMCM7.c
@@ -0,0 +1,295 @@
+/**************************************************************************//**
+ * @file     startup_ARMCM7.s
+ * @brief    CMSIS Core Device Startup File for
+ *           ARMCM7 Device Series
+ * @version  V5.00
+ * @date     26. April 2016
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <stdint.h>
+
+
+/*----------------------------------------------------------------------------
+  Linker generated Symbols
+ *----------------------------------------------------------------------------*/
+extern uint32_t __etext;
+extern uint32_t __data_start__;
+extern uint32_t __data_end__;
+extern uint32_t __copy_table_start__;
+extern uint32_t __copy_table_end__;
+extern uint32_t __zero_table_start__;
+extern uint32_t __zero_table_end__;
+extern uint32_t __bss_start__;
+extern uint32_t __bss_end__;
+extern uint32_t __StackTop;
+
+/*----------------------------------------------------------------------------
+  Exception / Interrupt Handler Function Prototype
+ *----------------------------------------------------------------------------*/
+typedef void( *pFunc )( void );
+
+
+/*----------------------------------------------------------------------------
+  External References
+ *----------------------------------------------------------------------------*/
+#ifndef __START
+extern void  _start(void) __attribute__((noreturn));    /* PreeMain (C library entry point) */
+#else
+extern int  __START(void) __attribute__((noreturn));    /* main entry point */
+#endif
+
+#ifndef __NO_SYSTEM_INIT
+extern void SystemInit (void);            /* CMSIS System Initialization      */
+#endif
+
+
+/*----------------------------------------------------------------------------
+  Internal References
+ *----------------------------------------------------------------------------*/
+void Default_Handler(void);                          /* Default empty handler */
+void Reset_Handler(void);                            /* Reset Handler */
+
+
+/*----------------------------------------------------------------------------
+  User Initial Stack & Heap
+ *----------------------------------------------------------------------------*/
+#ifndef __STACK_SIZE
+  #define	__STACK_SIZE  0x00000400
+#endif
+static uint8_t stack[__STACK_SIZE] __attribute__ ((aligned(8), used, section(".stack")));
+
+#ifndef __HEAP_SIZE
+  #define	__HEAP_SIZE   0x00000C00
+#endif
+#if __HEAP_SIZE > 0
+static uint8_t heap[__HEAP_SIZE]   __attribute__ ((aligned(8), used, section(".heap")));
+#endif
+
+
+/*----------------------------------------------------------------------------
+  Exception / Interrupt Handler
+ *----------------------------------------------------------------------------*/
+/* Cortex-M7 Processor Exceptions */
+void NMI_Handler         (void) __attribute__ ((weak, alias("Default_Handler")));
+void HardFault_Handler   (void) __attribute__ ((weak, alias("Default_Handler")));
+void MemManage_Handler   (void) __attribute__ ((weak, alias("Default_Handler")));
+void BusFault_Handler    (void) __attribute__ ((weak, alias("Default_Handler")));
+void UsageFault_Handler  (void) __attribute__ ((weak, alias("Default_Handler")));
+void SVC_Handler         (void) __attribute__ ((weak, alias("Default_Handler")));
+void DebugMon_Handler    (void) __attribute__ ((weak, alias("Default_Handler")));
+void PendSV_Handler      (void) __attribute__ ((weak, alias("Default_Handler")));
+void SysTick_Handler     (void) __attribute__ ((weak, alias("Default_Handler")));
+
+/* ARMCM7 Specific Interrupts */
+void WDT_IRQHandler      (void) __attribute__ ((weak, alias("Default_Handler")));
+void RTC_IRQHandler      (void) __attribute__ ((weak, alias("Default_Handler")));
+void TIM0_IRQHandler     (void) __attribute__ ((weak, alias("Default_Handler")));
+void TIM2_IRQHandler     (void) __attribute__ ((weak, alias("Default_Handler")));
+void MCIA_IRQHandler     (void) __attribute__ ((weak, alias("Default_Handler")));
+void MCIB_IRQHandler     (void) __attribute__ ((weak, alias("Default_Handler")));
+void UART0_IRQHandler    (void) __attribute__ ((weak, alias("Default_Handler")));
+void UART1_IRQHandler    (void) __attribute__ ((weak, alias("Default_Handler")));
+void UART2_IRQHandler    (void) __attribute__ ((weak, alias("Default_Handler")));
+void UART4_IRQHandler    (void) __attribute__ ((weak, alias("Default_Handler")));
+void AACI_IRQHandler     (void) __attribute__ ((weak, alias("Default_Handler")));
+void CLCD_IRQHandler     (void) __attribute__ ((weak, alias("Default_Handler")));
+void ENET_IRQHandler     (void) __attribute__ ((weak, alias("Default_Handler")));
+void USBDC_IRQHandler    (void) __attribute__ ((weak, alias("Default_Handler")));
+void USBHC_IRQHandler    (void) __attribute__ ((weak, alias("Default_Handler")));
+void CHLCD_IRQHandler    (void) __attribute__ ((weak, alias("Default_Handler")));
+void FLEXRAY_IRQHandler  (void) __attribute__ ((weak, alias("Default_Handler")));
+void CAN_IRQHandler      (void) __attribute__ ((weak, alias("Default_Handler")));
+void LIN_IRQHandler      (void) __attribute__ ((weak, alias("Default_Handler")));
+void I2C_IRQHandler      (void) __attribute__ ((weak, alias("Default_Handler")));
+void CPU_CLCD_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
+void UART3_IRQHandler    (void) __attribute__ ((weak, alias("Default_Handler")));
+void SPI_IRQHandler      (void) __attribute__ ((weak, alias("Default_Handler")));
+
+
+/*----------------------------------------------------------------------------
+  Exception / Interrupt Vector table
+ *----------------------------------------------------------------------------*/
+const pFunc __Vectors[] __attribute__ ((section(".vectors"))) = {
+  /* Cortex-M7 Exceptions Handler */
+  (pFunc)((uint32_t)&__StackTop),           /*      Initial Stack Pointer     */
+  Reset_Handler,                            /*      Reset Handler             */
+  NMI_Handler,                              /*      NMI Handler               */
+  HardFault_Handler,                        /*      Hard Fault Handler        */
+  MemManage_Handler,                        /*      MPU Fault Handler         */
+  BusFault_Handler,                         /*      Bus Fault Handler         */
+  UsageFault_Handler,                       /*      Usage Fault Handler       */
+  0,                                        /*      Reserved                  */
+  0,                                        /*      Reserved                  */
+  0,                                        /*      Reserved                  */
+  0,                                        /*      Reserved                  */
+  SVC_Handler,                              /*      SVCall Handler            */
+  DebugMon_Handler,                         /*      Debug Monitor Handler     */
+  0,                                        /*      Reserved                  */
+  PendSV_Handler,                           /*      PendSV Handler            */
+  SysTick_Handler,                          /*      SysTick Handler           */
+
+  /* External interrupts */
+  WDT_IRQHandler,                           /*  0:  Watchdog Timer            */
+  RTC_IRQHandler,                           /*  1:  Real Time Clock           */
+  TIM0_IRQHandler,                          /*  2:  Timer0 / Timer1           */
+  TIM2_IRQHandler,                          /*  3:  Timer2 / Timer3           */
+  MCIA_IRQHandler,                          /*  4:  MCIa                      */
+  MCIB_IRQHandler,                          /*  5:  MCIb                      */
+  UART0_IRQHandler,                         /*  6:  UART0 - DUT FPGA          */
+  UART1_IRQHandler,                         /*  7:  UART1 - DUT FPGA          */
+  UART2_IRQHandler,                         /*  8:  UART2 - DUT FPGA          */
+  UART4_IRQHandler,                         /*  9:  UART4 - not connected     */
+  AACI_IRQHandler,                          /* 10: AACI / AC97                */
+  CLCD_IRQHandler,                          /* 11: CLCD Combined Interrupt    */
+  ENET_IRQHandler,                          /* 12: Ethernet                   */
+  USBDC_IRQHandler,                         /* 13: USB Device                 */
+  USBHC_IRQHandler,                         /* 14: USB Host Controller        */
+  CHLCD_IRQHandler,                         /* 15: Character LCD              */
+  FLEXRAY_IRQHandler,                       /* 16: Flexray                    */
+  CAN_IRQHandler,                           /* 17: CAN                        */
+  LIN_IRQHandler,                           /* 18: LIN                        */
+  I2C_IRQHandler,                           /* 19: I2C ADC/DAC                */
+  0,                                        /* 20: Reserved                   */
+  0,                                        /* 21: Reserved                   */
+  0,                                        /* 22: Reserved                   */
+  0,                                        /* 23: Reserved                   */
+  0,                                        /* 24: Reserved                   */
+  0,                                        /* 25: Reserved                   */
+  0,                                        /* 26: Reserved                   */
+  0,                                        /* 27: Reserved                   */
+  CPU_CLCD_IRQHandler,                      /* 28: Reserved - CPU FPGA CLCD   */
+  0,                                        /* 29: Reserved - CPU FPGA        */
+  UART3_IRQHandler,                         /* 30: UART3    - CPU FPGA        */
+  SPI_IRQHandler                            /* 31: SPI Touchscreen - CPU FPGA */
+};
+
+
+/*----------------------------------------------------------------------------
+  Reset Handler called on controller reset
+ *----------------------------------------------------------------------------*/
+void Reset_Handler(void) {
+  uint32_t *pSrc, *pDest;
+  uint32_t *pTable __attribute__((unused));
+
+/*  Firstly it copies data from read only memory to RAM. There are two schemes
+ *  to copy. One can copy more than one sections. Another can only copy
+ *  one section.  The former scheme needs more instructions and read-only
+ *  data to implement than the latter.
+ *  Macro __STARTUP_COPY_MULTIPLE is used to choose between two schemes.  */
+
+#ifdef __STARTUP_COPY_MULTIPLE
+/*  Multiple sections scheme.
+ *
+ *  Between symbol address __copy_table_start__ and __copy_table_end__,
+ *  there are array of triplets, each of which specify:
+ *    offset 0: LMA of start of a section to copy from
+ *    offset 4: VMA of start of a section to copy to
+ *    offset 8: size of the section to copy. Must be multiply of 4
+ *
+ *  All addresses must be aligned to 4 bytes boundary.
+ */
+  pTable = &__copy_table_start__;
+
+  for (; pTable < &__copy_table_end__; pTable = pTable + 3) {
+		pSrc  = (uint32_t*)*(pTable + 0);
+		pDest = (uint32_t*)*(pTable + 1);
+		for (; pDest < (uint32_t*)(*(pTable + 1) + *(pTable + 2)) ; ) {
+      *pDest++ = *pSrc++;
+		}
+	}
+#else
+/*  Single section scheme.
+ *
+ *  The ranges of copy from/to are specified by following symbols
+ *    __etext: LMA of start of the section to copy from. Usually end of text
+ *    __data_start__: VMA of start of the section to copy to
+ *    __data_end__: VMA of end of the section to copy to
+ *
+ *  All addresses must be aligned to 4 bytes boundary.
+ */
+  pSrc  = &__etext;
+  pDest = &__data_start__;
+
+  for ( ; pDest < &__data_end__ ; ) {
+    *pDest++ = *pSrc++;
+  }
+#endif /*__STARTUP_COPY_MULTIPLE */
+
+/*  This part of work usually is done in C library startup code. Otherwise,
+ *  define this macro to enable it in this startup.
+ *
+ *  There are two schemes too. One can clear multiple BSS sections. Another
+ *  can only clear one section. The former is more size expensive than the
+ *  latter.
+ *
+ *  Define macro __STARTUP_CLEAR_BSS_MULTIPLE to choose the former.
+ *  Otherwise efine macro __STARTUP_CLEAR_BSS to choose the later.
+ */
+#ifdef __STARTUP_CLEAR_BSS_MULTIPLE
+/*  Multiple sections scheme.
+ *
+ *  Between symbol address __copy_table_start__ and __copy_table_end__,
+ *  there are array of tuples specifying:
+ *    offset 0: Start of a BSS section
+ *    offset 4: Size of this BSS section. Must be multiply of 4
+ */
+  pTable = &__zero_table_start__;
+
+  for (; pTable < &__zero_table_end__; pTable = pTable + 2) {
+		pDest = (uint32_t*)*(pTable + 0);
+		for (; pDest < (uint32_t*)(*(pTable + 0) + *(pTable + 1)) ; ) {
+      *pDest++ = 0;
+		}
+	}
+#elif defined (__STARTUP_CLEAR_BSS)
+/*  Single BSS section scheme.
+ *
+ *  The BSS section is specified by following symbols
+ *    __bss_start__: start of the BSS section.
+ *    __bss_end__: end of the BSS section.
+ *
+ *  Both addresses must be aligned to 4 bytes boundary.
+ */
+  pDest = &__bss_start__;
+
+  for ( ; pDest < &__bss_end__ ; ) {
+    *pDest++ = 0UL;
+  }
+#endif /* __STARTUP_CLEAR_BSS_MULTIPLE || __STARTUP_CLEAR_BSS */
+
+#ifndef __NO_SYSTEM_INIT
+	SystemInit();
+#endif
+
+#ifndef __START
+#define __START _start
+#endif
+	__START();
+
+}
+
+
+/*----------------------------------------------------------------------------
+  Default Handler for Exceptions / Interrupts
+ *----------------------------------------------------------------------------*/
+void Default_Handler(void) {
+
+	while(1);
+}
diff --git a/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM7_SP/startup_ARMCM7.s b/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM7_SP/startup_ARMCM7.s
new file mode 100644
index 0000000..b69f038
--- /dev/null
+++ b/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM7_SP/startup_ARMCM7.s
@@ -0,0 +1,262 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM7.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM7 Device Series
+; * @version  V5.00
+; * @date     02. March 2016
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;/*
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+;*/
+
+
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000C00
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp              ; Top of Stack
+                DCD     Reset_Handler             ; Reset Handler
+                DCD     NMI_Handler               ; NMI Handler
+                DCD     HardFault_Handler         ; Hard Fault Handler
+                DCD     MemManage_Handler         ; MPU Fault Handler
+                DCD     BusFault_Handler          ; Bus Fault Handler
+                DCD     UsageFault_Handler        ; Usage Fault Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     SVC_Handler               ; SVCall Handler
+                DCD     DebugMon_Handler          ; Debug Monitor Handler
+                DCD     0                         ; Reserved
+                DCD     PendSV_Handler            ; PendSV Handler
+                DCD     SysTick_Handler           ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WDT_IRQHandler            ;  0:  Watchdog Timer
+                DCD     RTC_IRQHandler            ;  1:  Real Time Clock
+                DCD     TIM0_IRQHandler           ;  2:  Timer0 / Timer1
+                DCD     TIM2_IRQHandler           ;  3:  Timer2 / Timer3
+                DCD     MCIA_IRQHandler           ;  4:  MCIa
+                DCD     MCIB_IRQHandler           ;  5:  MCIb
+                DCD     UART0_IRQHandler          ;  6:  UART0 - DUT FPGA
+                DCD     UART1_IRQHandler          ;  7:  UART1 - DUT FPGA
+                DCD     UART2_IRQHandler          ;  8:  UART2 - DUT FPGA
+                DCD     UART4_IRQHandler          ;  9:  UART4 - not connected
+                DCD     AACI_IRQHandler           ; 10: AACI / AC97
+                DCD     CLCD_IRQHandler           ; 11: CLCD Combined Interrupt
+                DCD     ENET_IRQHandler           ; 12: Ethernet
+                DCD     USBDC_IRQHandler          ; 13: USB Device
+                DCD     USBHC_IRQHandler          ; 14: USB Host Controller
+                DCD     CHLCD_IRQHandler          ; 15: Character LCD
+                DCD     FLEXRAY_IRQHandler        ; 16: Flexray
+                DCD     CAN_IRQHandler            ; 17: CAN
+                DCD     LIN_IRQHandler            ; 18: LIN
+                DCD     I2C_IRQHandler            ; 19: I2C ADC/DAC
+                DCD     0                         ; 20: Reserved
+                DCD     0                         ; 21: Reserved
+                DCD     0                         ; 22: Reserved
+                DCD     0                         ; 23: Reserved
+                DCD     0                         ; 24: Reserved
+                DCD     0                         ; 25: Reserved
+                DCD     0                         ; 26: Reserved
+                DCD     0                         ; 27: Reserved
+                DCD     CPU_CLCD_IRQHandler       ; 28: Reserved - CPU FPGA CLCD
+                DCD     0                         ; 29: Reserved - CPU FPGA
+                DCD     UART3_IRQHandler          ; 30: UART3    - CPU FPGA
+                DCD     SPI_IRQHandler            ; 31: SPI Touchscreen - CPU FPGA
+__Vectors_End
+
+__Vectors_Size  EQU     __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT  Reset_Handler             [WEAK]
+                IMPORT  SystemInit
+                IMPORT  __main
+                LDR     R0, =SystemInit
+                BLX     R0
+                LDR     R0, =__main
+                BX      R0
+                ENDP
+
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler               [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler         [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler         [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler          [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler        [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler               [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler          [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler            [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler           [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WDT_IRQHandler            [WEAK]
+                EXPORT  RTC_IRQHandler            [WEAK]
+                EXPORT  TIM0_IRQHandler           [WEAK]
+                EXPORT  TIM2_IRQHandler           [WEAK]
+                EXPORT  MCIA_IRQHandler           [WEAK]
+                EXPORT  MCIB_IRQHandler           [WEAK]
+                EXPORT  UART0_IRQHandler          [WEAK]
+                EXPORT  UART1_IRQHandler          [WEAK]
+                EXPORT  UART2_IRQHandler          [WEAK]
+                EXPORT  UART3_IRQHandler          [WEAK]
+                EXPORT  UART4_IRQHandler          [WEAK]
+                EXPORT  AACI_IRQHandler           [WEAK]
+                EXPORT  CLCD_IRQHandler           [WEAK]
+                EXPORT  ENET_IRQHandler           [WEAK]
+                EXPORT  USBDC_IRQHandler          [WEAK]
+                EXPORT  USBHC_IRQHandler          [WEAK]
+                EXPORT  CHLCD_IRQHandler          [WEAK]
+                EXPORT  FLEXRAY_IRQHandler        [WEAK]
+                EXPORT  CAN_IRQHandler            [WEAK]
+                EXPORT  LIN_IRQHandler            [WEAK]
+                EXPORT  I2C_IRQHandler            [WEAK]
+                EXPORT  CPU_CLCD_IRQHandler       [WEAK]
+                EXPORT  SPI_IRQHandler            [WEAK]
+
+WDT_IRQHandler
+RTC_IRQHandler
+TIM0_IRQHandler
+TIM2_IRQHandler
+MCIA_IRQHandler
+MCIB_IRQHandler
+UART0_IRQHandler
+UART1_IRQHandler
+UART2_IRQHandler
+UART3_IRQHandler
+UART4_IRQHandler
+AACI_IRQHandler
+CLCD_IRQHandler
+ENET_IRQHandler
+USBDC_IRQHandler
+USBHC_IRQHandler
+CHLCD_IRQHandler
+FLEXRAY_IRQHandler
+CAN_IRQHandler
+LIN_IRQHandler
+I2C_IRQHandler
+CPU_CLCD_IRQHandler
+SPI_IRQHandler
+                B       .
+
+                ENDP
+
+
+                ALIGN
+
+
+; User Initial Stack & Heap
+
+                IF      :DEF:__MICROLIB
+
+                EXPORT  __initial_sp
+                EXPORT  __heap_base
+                EXPORT  __heap_limit
+
+                ELSE
+
+                IMPORT  __use_two_region_memory
+                EXPORT  __user_initial_stackheap
+
+__user_initial_stackheap PROC
+                LDR     R0, =  Heap_Mem
+                LDR     R1, =(Stack_Mem + Stack_Size)
+                LDR     R2, = (Heap_Mem +  Heap_Size)
+                LDR     R3, = Stack_Mem
+                BX      LR
+                ENDP
+
+                ALIGN
+
+                ENDIF
+
+
+                END
diff --git a/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM7_SP/system_ARMCM7.c b/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM7_SP/system_ARMCM7.c
new file mode 100644
index 0000000..65bfaca
--- /dev/null
+++ b/NN/Examples/ARM/arm_nn_examples/gru/RTE/Device/ARMCM7_SP/system_ARMCM7.c
@@ -0,0 +1,85 @@
+/**************************************************************************//**
+ * @file     system_ARMCM7.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM7 Device Series
+ * @version  V5.00
+ * @date     08. April 2016
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if defined (ARMCM7)
+  #include "ARMCM7.h"
+#elif defined (ARMCM7_SP)
+  #include "ARMCM7_SP.h"
+#elif defined (ARMCM7_DP)
+  #include "ARMCM7_DP.h"
+#else
+  #error device not specified!
+#endif
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            ( 5000000U)      /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (5 * XTAL)
+
+
+/*----------------------------------------------------------------------------
+  Externals
+ *----------------------------------------------------------------------------*/
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
+  extern uint32_t __Vectors;
+#endif
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
+  SCB->VTOR = (uint32_t) &__Vectors;
+#endif
+
+#if defined (__FPU_USED) && (__FPU_USED == 1)
+  SCB->CPACR |= ((3U << 10*2) |           /* set CP10 Full Access */
+                 (3U << 11*2)  );         /* set CP11 Full Access */
+#endif
+
+#ifdef UNALIGNED_SUPPORT_DISABLE
+  SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk;
+#endif
+
+  SystemCoreClock = SYSTEM_CLOCK;
+}