diff options
Diffstat (limited to 'gerboweb/deploy/nsd.conf')
| -rw-r--r-- | gerboweb/deploy/nsd.conf | 372 |
1 files changed, 0 insertions, 372 deletions
diff --git a/gerboweb/deploy/nsd.conf b/gerboweb/deploy/nsd.conf deleted file mode 100644 index d4b577f..0000000 --- a/gerboweb/deploy/nsd.conf +++ /dev/null @@ -1,372 +0,0 @@ -# -# nsd.conf -- the NSD(8) configuration file, nsd.conf(5). -# -# Copyright (c) 2001-2011, NLnet Labs. All rights reserved. -# -# See LICENSE for the license. -# - -# This is a comment. -# Sample configuration file -# include: "file" # include that file's text over here. Globbed, "*.conf" - -# options for the nsd server -server: - # Number of NSD servers to fork. Put the number of CPUs to use here. - server-count: 1 - - # uncomment to specify specific interfaces to bind (default are the - # wildcard interfaces 0.0.0.0 and ::0). - # For servers with multiple IP addresses, list them one by one, - # or the source address of replies could be wrong. - # Use ip-transparent to be able to list addresses that turn on later. - # ip-address: 1.2.3.4 - # ip-address: 1.2.3.4@5678 - # ip-address: 12fe::8ef0 - - # Allow binding to non local addresses. Default no. - # ip-transparent: no - - # Allow binding to addresses that are down. Default no. - # ip-freebind: no - - # use the reuseport socket option for performance. Default no. - reuseport: yes - - # override maximum socket send buffer size. Default of 0 results in - # send buffer size being set to 1048576 (bytes). - # send-buffer-size: 1048576 - - # override maximum socket receive buffer size. Default of 0 results in - # receive buffer size being set to 1048576 (bytes). - # receive-buffer-size: 1048576 - - # enable debug mode, does not fork daemon process into the background. - # debug-mode: no - - # listen on IPv4 connections - # do-ip4: yes - - # listen on IPv6 connections - # do-ip6: yes - - # port to answer queries on. default is 53. - # port: 53 - - # Verbosity level. - # verbosity: 0 - - # After binding socket, drop user privileges. - # can be a username, id or id.gid. - # username: nsd - - # Run NSD in a chroot-jail. - # make sure to have pidfile and database reachable from there. - # by default, no chroot-jail is used. - # chroot: "/etc/nsd" - - # The directory for zonefile: files. The daemon chdirs here. - zonesdir: "/etc/nsd" - - # the list of dynamically added zones. - # zonelistfile: "/var/lib/nsd/zone.list" - - # the database to use - # if set to "" then no disk-database is used, less memory usage. - database: "" - - # log messages to file. Default to stderr and syslog (with - # facility LOG_DAEMON). stderr disappears when daemon goes to bg. - # logfile: "/var/log/nsd.log" - - # File to store pid for nsd in. - # pidfile: "/run/nsd/nsd.pid" - - # The file where secondary zone refresh and expire timeouts are kept. - # If you delete this file, all secondary zones are forced to be - # 'refreshing' (as if nsd got a notify). Set to "" to disable. - # xfrdfile: "/var/lib/nsd/ixfr.state" - - # The directory where zone transfers are stored, in a subdir of it. - # xfrdir: "/tmp" - - # don't answer VERSION.BIND and VERSION.SERVER CHAOS class queries - hide-version: yes - - # don't answer HOSTNAME.BIND and ID.SERVER CHAOS class queries - hide-identity: yes - - # version string the server responds with for chaos queries. - # default is 'NSD x.y.z' with the server's version number. - # version: "NSD" - - # identify the server (CH TXT ID.SERVER entry). - # identity: "unidentified server" - - # NSID identity (hex string, or "ascii_somestring"). default disabled. - # nsid: "aabbccdd" - - # Maximum number of concurrent TCP connections per server. - # tcp-count: 100 - - # Accept (and immediately close) TCP connections after maximum number - # of connections is reached to prevent kernel connection queue from - # growing. - # tcp-reject-overflow: no - - # Maximum number of queries served on a single TCP connection. - # By default 0, which means no maximum. - # tcp-query-count: 0 - - # Override the default (120 seconds) TCP timeout. - # tcp-timeout: 120 - - # Maximum segment size (MSS) of TCP socket on which the server - # responds to queries. Default is 0, system default MSS. - # tcp-mss: 0 - - # Maximum segment size (MSS) of TCP socket for outgoing AXFR request. - # Default is 0, system default MSS. - # outgoing-tcp-mss: 0 - - # Preferred EDNS buffer size for IPv4. - # ipv4-edns-size: 4096 - - # Preferred EDNS buffer size for IPv6. - # ipv6-edns-size: 4096 - - # statistics are produced every number of seconds. Prints to log. - # Default is 0, meaning no statistics are produced. - # statistics: 3600 - - # Number of seconds between reloads triggered by xfrd. - # xfrd-reload-timeout: 1 - - # log timestamp in ascii (y-m-d h:m:s.msec), yes is default. - # log-time-ascii: yes - - # round robin rotation of records in the answer. - round-robin: yes - - # minimal-responses only emits extra data for referrals. - minimal-responses: yes - - # Do not return additional information if the apex zone of the - # additional information is configured but does not match the apex zone - # of the initial query. - # confine-to-zone: no - - # refuse queries of type ANY. For stopping floods. - refuse-any: yes - - # check mtime of all zone files on start and sighup - # zonefiles-check: yes - - # write changed zonefiles to disk, every N seconds. - # default is 0(disabled) or 3600(if database is ""). - # zonefiles-write: 3600 - - # RRLconfig - # Response Rate Limiting, size of the hashtable. Default 1000000. - # rrl-size: 1000000 - - # Response Rate Limiting, maximum QPS allowed (from one query source). - # If set to 0, ratelimiting is disabled. Also set - # rrl-whitelist-ratelimit to 0 to disable ratelimit processing. - # Default is on. - # rrl-ratelimit: 200 - - # Response Rate Limiting, number of packets to discard before - # sending a SLIP response (a truncated one, allowing an honest - # resolver to retry with TCP). Default is 2 (one half of the - # queries will receive a SLIP response, 0 disables SLIP (all - # packets are discarded), 1 means every request will get a - # SLIP response. When the ratelimit is hit the traffic is - # divided by the rrl-slip value. - # rrl-slip: 2 - - # Response Rate Limiting, IPv4 prefix length. Addresses are - # grouped by netblock. - # rrl-ipv4-prefix-length: 24 - - # Response Rate Limiting, IPv6 prefix length. Addresses are - # grouped by netblock. - # rrl-ipv6-prefix-length: 64 - - # Response Rate Limiting, maximum QPS allowed (from one query source) - # for whitelisted types. Default is on. - # rrl-whitelist-ratelimit: 2000 - # RRLend - - # Optional local server config - include: "/etc/nsd/server.d/*.conf" - -# Include optional local configs. -include: "/etc/nsd/conf.d/*.conf" - -# Fedora: DNSTAP not yet enabled -# dnstap: - # set this to yes and set one or more of dnstap-log-..-messages to yes. - # dnstap-enable: no - # dnstap-socket-path: "/var/run/dnstap.sock" - # dnstap-send-identity: no - # dnstap-send-version: no - # dnstap-identity: "" - # dnstap-version: "" - # dnstap-log-auth-query-messages: no - # dnstap-log-auth-response-messages: no - - # Service clients over TLS (on the TCP sockets), with plain DNS inside - # the TLS stream. Give the certificate to use and private key. - # Default is "" (disabled). Requires restart to take effect. - # tls-service-key: "path/to/privatekeyfile.key" - # tls-service-pem: "path/to/publiccertfile.pem" - # tls-service-ocsp: "path/to/ocsp.pem" - # tls-port: 853 - -# Remote control config section. -remote-control: - # Enable remote control with nsd-control(8) here. - # set up the keys and certificates with nsd-control-setup. - control-enable: yes - - # what interfaces are listened to for control, default is on localhost. - # with an absolute path, a unix local named pipe is used for control - # (and key and cert files are not needed, use directory permissions). - # control-interface: 127.0.0.1 - # control-interface: ::1 - control-interface: /run/nsd/nsd.ctl - - # port number for remote control operations (uses TLS over TCP). - # control-port: 8952 - - # nsd server key file for remote control. - # server-key-file: "/etc/nsd/nsd_server.key" - - # nsd server certificate file for remote control. - # server-cert-file: "/etc/nsd/nsd_server.pem" - - # nsd-control key file. - # control-key-file: "/etc/nsd/nsd_control.key" - - # nsd-control certificate file. - # control-cert-file: "/etc/nsd/nsd_control.pem" - - -# Secret keys for TSIGs that secure zone transfers. -# You could include: "secret.keys" and put the 'key:' statements in there, -# and give that file special access control permissions. -# -# key: - # The key name is sent to the other party, it must be the same - #name: "keyname" - # algorithm hmac-md5, or sha1, sha256, sha224, sha384, sha512 - #algorithm: sha256 - # secret material, must be the same as the other party uses. - # base64 encoded random number. - # e.g. from dd if=/dev/random of=/dev/stdout count=1 bs=32 | base64 - #secret: "K2tf3TRjvQkVCmJF3/Z9vA==" - - -# Patterns have zone configuration and they are shared by one or more zones. -# -# pattern: - # name by which the pattern is referred to - #name: "myzones" - # the zonefile for the zones that use this pattern. - # if relative then from the zonesdir (inside the chroot). - # the name is processed: %s - zone name (as appears in zone:name). - # %1 - first character of zone name, %2 second, %3 third. - # %z - topleveldomain label of zone, %y, %x next labels in name. - # if label or character does not exist you get a dot '.'. - # for example "%s.zone" or "zones/%1/%2/%3/%s" or "secondary/%z/%s" - #zonefile: "%s.zone" - - # If no master and slave access control elements are provided, - # this zone will not be served to/from other servers. - - # A master zone needs notify: and provide-xfr: lists. A slave - # may also allow zone transfer (for debug or other secondaries). - # notify these slaves when the master zone changes, address TSIG|NOKEY - # IP can be ipv4 and ipv6, with @port for a nondefault port number. - #notify: 192.0.2.1 NOKEY - # allow these IPs and TSIG to transfer zones, addr TSIG|NOKEY|BLOCKED - # address range 192.0.2.0/24, 1.2.3.4&255.255.0.0, 3.0.2.20-3.0.2.40 - #provide-xfr: 192.0.2.0/24 my_tsig_key_name - # set the number of retries for notify. - #notify-retry: 5 - - # uncomment to provide AXFR to all the world - # provide-xfr: 0.0.0.0/0 NOKEY - # provide-xfr: ::0/0 NOKEY - - # A slave zone needs allow-notify: and request-xfr: lists. - #allow-notify: 2001:db8::0/64 my_tsig_key_name - # By default, a slave will request a zone transfer with IXFR/TCP. - # If you want to make use of IXFR/UDP use: UDP addr tsigkey - # for a master that only speaks AXFR (like NSD) use AXFR addr tsigkey - #request-xfr: 192.0.2.2 the_tsig_key_name - # Attention: You cannot use UDP and AXFR together. AXFR is always over - # TCP. If you use UDP, we higly recommend you to deploy TSIG. - # Allow AXFR fallback if the master does not support IXFR. Default - # is yes. - #allow-axfr-fallback: yes - # set local interface for sending zone transfer requests. - # default is let the OS choose. - #outgoing-interface: 10.0.0.10 - # limit the refresh and retry interval in seconds. - #max-refresh-time: 2419200 - #min-refresh-time: 0 - #max-retry-time: 1209600 - #min-retry-time: 0 - - # Slave server tries zone transfer to all masters and picks highest - # zone version available, for when masters have different versions. - #multi-master-check: no - - # limit the zone transfer size (in bytes), stops very large transfers - # 0 is no limits enforced. - # size-limit-xfr: 0 - - # if compiled with --enable-zone-stats, give name of stat block for - # this zone (or group of zones). Output from nsd-control stats. - # zonestats: "%s" - - # if you give another pattern name here, at this point the settings - # from that pattern are inserted into this one (as if it were a - # macro). The statement can be given in between other statements, - # because the order of access control elements can make a difference - # (which master to request from first, which slave to notify first). - #include-pattern: "common-masters" - - -# Fixed zone entries. Here you can config zones that cannot be deleted. -# Zones that are dynamically added and deleted are put in the zonelist file. -# -# zone: - # name: "example.com" - # you can give a pattern here, all the settings from that pattern - # are then inserted at this point - # include-pattern: "master" - # You can also specify (additional) options directly for this zone. - # zonefile: "example.com.zone" - # request-xfr: 192.0.2.1 example.com.key - - # RRLconfig - # Response Rate Limiting, whitelist types - # rrl-whitelist: nxdomain - # rrl-whitelist: error - # rrl-whitelist: referral - # rrl-whitelist: any - # rrl-whitelist: rrsig - # rrl-whitelist: wildcard - # rrl-whitelist: nodata - # rrl-whitelist: dnskey - # rrl-whitelist: positive - # rrl-whitelist: all - # RRLend - -zone: - name: "dyn.jaseg.de" - zonefile: "/var/lib/dyndns/dyn.jaseg.de.zone" - |