1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
|
/*
* March 2017 Karl Palsson <karlp@tweak.net.au>
*/
#include <errno.h>
#include <stdio.h>
#include <unistd.h>
#include <libopencm3/cm3/nvic.h>
#include <libopencm3/stm32/gpio.h>
#include <libopencm3/stm32/spi.h>
#include <libopencm3/stm32/rcc.h>
#include "trace.h"
#include "hw.h"
//#include "i2c-master.h"
#define LED_DISCO_GREEN_PORT GPIOB
#define LED_DISCO_GREEN_PIN GPIO7
struct hw_detail hw_details = {
.periph = SPI2,
.periph_rcc = RCC_SPI2,
.periph_rst = RST_SPI2,
.pins = GPIO13| GPIO14 | GPIO15, /* SPI pins for setting AF with */
.port = GPIOB,
.port_rcc = RCC_GPIOB,
.trigger_rcc = RCC_GPIOB,
.trigger_port = GPIOB,
.trigger_pin = GPIO11,
};
/* provided in board files please*/
/**
* Setup any gpios or anything hardware specific.
* Should _only_ be things that can't be done in shared init()
*/
static void hw_init(void)
{
/* trigger pin gpio */
rcc_periph_clock_enable(hw_details.trigger_rcc);
gpio_mode_setup(hw_details.trigger_port, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, hw_details.trigger_pin);
/* spi control lines */
rcc_periph_clock_enable(hw_details.port_rcc);
gpio_mode_setup(hw_details.port, GPIO_MODE_AF, GPIO_PUPD_NONE, hw_details.pins);
gpio_set_output_options(hw_details.port, GPIO_OTYPE_PP, GPIO_OSPEED_10MHZ, hw_details.pins);
gpio_set_af(hw_details.port, GPIO_AF5, hw_details.pins);
}
static void test_init(void)
{
/* Setup SPI parameters. */
rcc_periph_clock_enable(hw_details.periph_rcc);
spi_init_master(hw_details.periph, SPI_CR1_BAUDRATE_FPCLK_DIV_16, SPI_CR1_CPOL_CLK_TO_0_WHEN_IDLE,
SPI_CR1_CPHA_CLK_TRANSITION_1, SPI_CR1_DFF_8BIT, SPI_CR1_MSBFIRST);
/* Ignore the stupid NSS pin. */
spi_enable_software_slave_management(hw_details.periph);
//spi_enable_ss_output(MRF_SPI);
spi_set_nss_high(hw_details.periph);
/* Finally enable the SPI. */
spi_enable(hw_details.periph);
}
static void test_task(void) {
static int i = 0;
printf("Test iteration %d\n", i++);
gpio_set(hw_details.trigger_port, hw_details.trigger_pin);
spi_xfer(hw_details.periph, 0xaa);
spi_xfer(hw_details.periph, 0x42);
spi_xfer(hw_details.periph, 0x69);
gpio_clear(hw_details.trigger_port, hw_details.trigger_pin);
}
static void setup(void)
{
printf("hi guys!\n");
hw_init();
test_init();
}
int main(void)
{
int i, j;
rcc_clock_setup_pll(&rcc_clock_config[RCC_CLOCK_VRANGE1_HSI_PLL_32MHZ]);
/* green led for ticking */
rcc_periph_clock_enable(RCC_GPIOB);
gpio_mode_setup(LED_DISCO_GREEN_PORT, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE,
LED_DISCO_GREEN_PIN);
setup();
while (1) {
test_task();
gpio_toggle(LED_DISCO_GREEN_PORT, LED_DISCO_GREEN_PIN);
for (i = 0; i < 0x800000; i++) { /* Wait a bit. */
__asm__("NOP");
}
}
return 0;
}
|
