1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
|
/*
* Oct 2015 Karl Palsson <karlp@tweak.net.au>
*/
#include <errno.h>
#include <stdio.h>
#include <unistd.h>
#include <libopencm3/cm3/nvic.h>
#include <libopencm3/stm32/adc.h>
#include <libopencm3/stm32/dac.h>
#include <libopencm3/stm32/flash.h>
#include <libopencm3/stm32/gpio.h>
#include <libopencm3/stm32/rcc.h>
#include <libopencm3/stm32/usart.h>
#include "trace.h"
#include "adc-power.h"
/* f3 pll setup, based on l1/f4*/
typedef struct {
uint8_t pll_mul;
uint8_t pll_div;
uint8_t pll_source;
uint32_t flash_config;
uint8_t hpre;
uint8_t ppre1;
uint8_t ppre2;
uint32_t apb1_frequency;
uint32_t apb2_frequency;
} rcc_clock_scale_t;
static void rcc_clock_setup_pll_f3_special(const rcc_clock_scale_t *clock)
{
/* Turn on the appropriate source for the PLL */
// TODO, some f3's have extra bits here
enum osc my_osc;
if (clock->pll_source == RCC_CFGR_PLLSRC_HSE_PREDIV) {
my_osc = HSE;
} else {
my_osc = HSI;
}
rcc_osc_on(my_osc);
while (!rcc_is_osc_ready(my_osc));
/* Configure flash settings. */
flash_set_ws(clock->flash_config);
/*
* Set prescalers for AHB, ADC, ABP1, ABP2.
* Do this before touching the PLL (TODO: why?).
*/
rcc_set_hpre(clock->hpre);
rcc_set_ppre1(clock->ppre1);
rcc_set_ppre2(clock->ppre2);
rcc_osc_off(PLL);
while (rcc_is_osc_ready(PLL));
rcc_set_pll_source(clock->pll_source);
rcc_set_pll_multiplier(clock->pll_mul);
// TODO - iff pll_div != 0, then maybe we're on a target that
// has the dividers?
/* Enable PLL oscillator and wait for it to stabilize. */
rcc_osc_on(PLL);
while (!rcc_is_osc_ready(PLL));
/* Select PLL as SYSCLK source. */
rcc_set_sysclk_source(RCC_CFGR_SW_PLL);
rcc_wait_for_sysclk_status(PLL);
/* Set the peripheral clock frequencies used. */
rcc_apb1_frequency = clock->apb1_frequency;
rcc_apb2_frequency = clock->apb2_frequency;
}
static void setup_clocks(void)
{
rcc_clock_scale_t clock_full_hse8mhz ={
.pll_mul = RCC_CFGR_PLLMUL_PLL_IN_CLK_X9,
.pll_source = RCC_CFGR_PLLSRC_HSE_PREDIV,
.hpre = RCC_CFGR_HPRE_DIV_NONE,
.ppre1 = RCC_CFGR_PPRE1_DIV_2,
.ppre2 = RCC_CFGR_PPRE2_DIV_NONE,
.flash_config = FLASH_ACR_PRFTBE | FLASH_ACR_LATENCY_2WS,
.apb1_frequency = 36000000,
.apb2_frequency = 72000000,
};
rcc_clock_setup_pll_f3_special(&clock_full_hse8mhz);
}
int main(void)
{
int i;
int j = 0;
setup_clocks();
/* Board led */
rcc_periph_clock_enable(RCC_GPIOE);
gpio_mode_setup(GPIOE, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, GPIO8);
gpio_set(GPIOE, GPIO8);
printf("hi guys!\n");
rcc_periph_clock_enable(RCC_GPIOA);
gpio_mode_setup(GPIOA, GPIO_MODE_ANALOG, GPIO_PUPD_NONE, GPIO1);
gpio_mode_setup(GPIOA, GPIO_MODE_ANALOG, GPIO_PUPD_NONE, GPIO5);
adc_power_init();
for (i = 0; i < 0x1000; i++) { /* need as much as 10 usecs for vreg */
__asm__("NOP");
}
while (1) {
adc_power_task_up();
gpio_toggle(GPIOE, GPIO8);
for (i = 0; i < 0x100000; i++) { /* Wait a bit. */
__asm__("NOP");
}
printf("tick...\n");
adc_power_task_down();
gpio_toggle(GPIOE, GPIO8);
for (i = 0; i < 0x100000; i++) { /* Wait a bit. */
__asm__("NOP");
}
}
return 0;
}
|