summaryrefslogtreecommitdiff
path: root/tests/i2c-master
diff options
context:
space:
mode:
Diffstat (limited to 'tests/i2c-master')
-rw-r--r--tests/i2c-master/i2c-master.c185
-rw-r--r--tests/i2c-master/i2c-master.h1
-rw-r--r--tests/i2c-master/main-stm32f4-disco.c138
3 files changed, 201 insertions, 123 deletions
diff --git a/tests/i2c-master/i2c-master.c b/tests/i2c-master/i2c-master.c
index 64c9cfe..2c8e604 100644
--- a/tests/i2c-master/i2c-master.c
+++ b/tests/i2c-master/i2c-master.c
@@ -2,22 +2,203 @@
* Feb 2017, Karl Palsson <karlp@tweak.net.au>
*/
+#include <stddef.h>
+#include <stdint.h>
+#include <stdio.h>
#include <libopencm3/stm32/i2c.h>
#include <libopencm3/stm32/rcc.h>
+#include "trace.h"
#include "hw.h"
#include "i2c-master.h"
+#define SENSOR_ADDRESS (0x40)
-void i2cm_init(void) {
+enum sht21_cmd_e {
+ SHT21_CMD_TEMP_HOLD = 0xe3,
+ SHT21_CMD_HUMIDITY_HOLD = 0xe5,
+ SHT21_CMD_TEMP_NOHOLD = 0xf3,
+ SHT21_CMD_HUMIDITY_NOHOLD = 0xf5,
+ SHT21_CMD_WRITE_REG = 0xe6,
+ SHT21_CMD_READ_REG = 0xe7,
+ SHT21_CMD_RESET = 0xfe,
+ /* 0xfa, 0x0f to read serial */
+};
+
+void i2cm_init(void)
+{
rcc_periph_clock_enable(hw_details.periph_rcc);
rcc_periph_reset_pulse(hw_details.periph_rst);
i2c_set_standard_mode(hw_details.periph);
- i2c_enable_ack(hw_details.periph);
+ // i2c_enable_ack(hw_details.periph); /* NO ACK FOR SHT21! */
//i2c_set_dutycycle(hw_details.periph, I2C_CCR_DUTY_DIV2); /* default, no need to do this really */
+
+ /* --------- board specific settings! */
i2c_set_clock_frequency(hw_details.periph, I2C_CR2_FREQ_42MHZ);
/* 42MHz / (100kHz * 2) */
i2c_set_ccr(hw_details.periph, 210);
/* standard mode, freqMhz+1*/
i2c_set_trise(hw_details.periph, 43);
+ /* --------- end of board specific settings!*/
+
i2c_peripheral_enable(hw_details.periph);
+}
+
+static void sht21_send_data(uint32_t i2c, size_t n, uint8_t *data)
+{
+ while ((I2C_SR2(i2c) & I2C_SR2_BUSY)) {
+ }
+
+ i2c_send_start(i2c);
+
+ /* Wait for master mode selected */
+ while (!((I2C_SR1(i2c) & I2C_SR1_SB)
+ & (I2C_SR2(i2c) & (I2C_SR2_MSL | I2C_SR2_BUSY))));
+
+ i2c_send_7bit_address(i2c, SENSOR_ADDRESS, I2C_WRITE);
+
+ /* Waiting for address is transferred. */
+ while (!(I2C_SR1(i2c) & I2C_SR1_ADDR));
+
+ /* Cleaning ADDR condition sequence. */
+ uint32_t reg32 = I2C_SR2(i2c);
+ (void) reg32; /* unused */
+
+ size_t i;
+ for (i = 0; i < n; i++) {
+ i2c_send_data(i2c, data[i]);
+ while (!(I2C_SR1(i2c) & (I2C_SR1_BTF)));
+ }
+}
+
+static void sht21_send_cmd(uint32_t i2c, uint8_t cmd)
+{
+ while ((I2C_SR2(i2c) & I2C_SR2_BUSY)) {
+ }
+
+ i2c_send_start(i2c);
+
+ /* Wait for master mode selected */
+ while (!((I2C_SR1(i2c) & I2C_SR1_SB)
+ & (I2C_SR2(i2c) & (I2C_SR2_MSL | I2C_SR2_BUSY))));
+
+ i2c_send_7bit_address(i2c, SENSOR_ADDRESS, I2C_WRITE);
+
+ /* Waiting for address is transferred. */
+ while (!(I2C_SR1(i2c) & I2C_SR1_ADDR));
+
+ /* Cleaning ADDR condition sequence. */
+ uint32_t reg32 = I2C_SR2(i2c);
+ (void) reg32; /* unused */
+
+ i2c_send_data(i2c, cmd);
+ while (!(I2C_SR1(i2c) & (I2C_SR1_BTF)));
+}
+
+static void sht21_readn(uint32_t i2c, int n, uint8_t *res)
+{
+ //assert(n > 0);
+ i2c_send_start(i2c);
+
+ i2c_enable_ack(i2c);
+
+ /* Wait for master mode selected */
+ while (!((I2C_SR1(i2c) & I2C_SR1_SB)
+ & (I2C_SR2(i2c) & (I2C_SR2_MSL | I2C_SR2_BUSY))));
+
+ i2c_send_7bit_address(i2c, SENSOR_ADDRESS, I2C_READ);
+
+ /* Waiting for address is transferred. */
+ while (!(I2C_SR1(i2c) & I2C_SR1_ADDR));
+ /* Cleaning ADDR condition sequence. */
+ uint32_t reg32 = I2C_SR2(i2c);
+ (void) reg32; /* unused */
+
+ int i = 0;
+ for (i = 0; i < n; ++i) {
+ if (i == n - 1) {
+ i2c_disable_ack(i2c);
+ }
+ while (!(I2C_SR1(i2c) & I2C_SR1_RxNE));
+ res[i] = i2c_get_data(i2c);
+ }
+ i2c_send_stop(i2c);
+
+ return;
+}
+
+static float sht21_convert_temp(uint16_t raw)
+{
+ //assert((raw & 0x2) == 0x2);
+ raw &= ~0x3; /* Clear lower status bits */
+ float tf = -46.85 + 175.72 * ((float) raw / 65536.0);
+ return tf;
+}
+
+static float sht21_convert_humi(uint16_t raw)
+{
+ //assert((raw & 0x2) == 0);
+ raw &= ~0x3; /* Clear lower status bits */
+ float tf = -6 + 125 * ((float) raw / 65536.0);
+ return tf;
+}
+
+static float sht21_read_temp_hold(uint32_t i2c)
+{
+ // gpio_set(LED_DISCO_BLUE_PORT, LED_DISCO_BLUE_PIN);
+ sht21_send_cmd(i2c, SHT21_CMD_TEMP_HOLD);
+
+ uint8_t data[3];
+ sht21_readn(i2c, 2, data);
+ uint8_t crc = data[2];
+ uint16_t temp = data[0] << 8 | data[1];
+ printf("CRC=%#x, data0=%#x, data1=%#x\n", crc, data[0], data[1]);
+ // gpio_clear(LED_DISCO_BLUE_PORT, LED_DISCO_BLUE_PIN);
+ return sht21_convert_temp(temp);
+}
+
+static float sht21_read_humi_hold(uint32_t i2c)
+{
+ // gpio_set(LED_DISCO_BLUE_PORT, LED_DISCO_BLUE_PIN);
+ sht21_send_cmd(i2c, SHT21_CMD_HUMIDITY_HOLD);
+
+ uint8_t data[3];
+ sht21_readn(i2c, 2, data);
+ uint8_t crc = data[2];
+ uint16_t left = data[0] << 8 | data[1];
+ printf("CRC=%#x, data0=%#x, data1=%#x\n", crc, data[0], data[1]);
+
+ // gpio_clear(LED_DISCO_BLUE_PORT, LED_DISCO_BLUE_PIN);
+ return sht21_convert_humi(left);
+}
+
+static void sht21_readid(void)
+{
+ sht21_send_cmd(I2C1, SHT21_CMD_READ_REG);
+ uint8_t raw;
+ sht21_readn(I2C1, 1, &raw);
+ printf("raw user reg = %#x\n", raw);
+ int resolution = ((raw & 0x80) >> 6) | (raw & 1);
+ printf("temp resolution is in %d bits\n", 14 - resolution);
+ printf("battery status: %s\n", (raw & (1 << 6) ? "failing" : "good"));
+ printf("On chip heater: %s\n", (raw & 0x2) ? "on" : "off");
+
+ uint8_t req1[] = {0xfa, 0x0f};
+ uint8_t res[8];
+ sht21_send_data(I2C1, 2, req1);
+ sht21_readn(I2C1, sizeof(res), res);
+ uint8_t req2[] = {0xfc, 0xc9};
+ uint8_t res2[8];
+ sht21_send_data(I2C1, 2, req2);
+ sht21_readn(I2C1, sizeof(res), res2);
+ printf("Serial = %02x%02x %02x%02x %02x%02x %02x%02x\n",
+ res2[3], res2[4], res[0], res[2], res[4], res[6], res2[0], res2[1]);
+}
+
+void i2cm_task(void)
+{
+ sht21_readid();
+ float temp = sht21_read_temp_hold(I2C1);
+ float humi = sht21_read_humi_hold(I2C1);
+ printf("Temp: %f C, RH: %f\n", temp, humi);
+
} \ No newline at end of file
diff --git a/tests/i2c-master/i2c-master.h b/tests/i2c-master/i2c-master.h
index 5e41a9a..340dc39 100644
--- a/tests/i2c-master/i2c-master.h
+++ b/tests/i2c-master/i2c-master.h
@@ -19,6 +19,7 @@ extern "C" {
void i2cm_init(void);
+ void i2cm_task(void);
#ifdef __cplusplus
}
diff --git a/tests/i2c-master/main-stm32f4-disco.c b/tests/i2c-master/main-stm32f4-disco.c
index f5594c0..1e30791 100644
--- a/tests/i2c-master/main-stm32f4-disco.c
+++ b/tests/i2c-master/main-stm32f4-disco.c
@@ -18,142 +18,47 @@
#define LED_DISCO_GREEN_PORT GPIOD
#define LED_DISCO_GREEN_PIN GPIO12
-#define CODEC_ADDRESS 0x4a
-
struct hw_detail hw_details = {
.periph = I2C1,
.periph_rcc = RCC_I2C1,
.periph_rst = RST_I2C1,
- .pins = GPIO6 | GPIO9, /* FIXME - only for onboard! */
+// .pins = GPIO6 | GPIO9, /* FIXME - only for onboard! */
+ .pins = GPIO8 | GPIO9, /* For SHT21 on I2c1 */
.port = GPIOB,
.port_rcc = RCC_GPIOB,
};
-static void codec_gpio_init(void)
+static void setup_i2c_gpio(void)
{
/* reset pin */
- rcc_periph_clock_enable(RCC_GPIOD);
- gpio_mode_setup(GPIOD, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, GPIO4);
+// rcc_periph_clock_enable(RCC_GPIOD);
+// gpio_mode_setup(GPIOD, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, GPIO4);
/* i2c control lines */
- rcc_periph_clock_enable(RCC_GPIOB);
- gpio_mode_setup(GPIOB, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO6 | GPIO9);
- gpio_set_output_options(GPIOB, GPIO_OTYPE_OD, GPIO_OSPEED_50MHZ, GPIO6 | GPIO9);
- gpio_set_af(GPIOB, GPIO_AF4, GPIO6 | GPIO9);
+ rcc_periph_clock_enable(hw_details.port_rcc);
+ gpio_mode_setup(hw_details.port, GPIO_MODE_AF, GPIO_PUPD_NONE, hw_details.pins);
+ gpio_set_output_options(hw_details.port, GPIO_OTYPE_OD, GPIO_OSPEED_50MHZ, hw_details.pins);
+ gpio_set_af(hw_details.port, GPIO_AF4, hw_details.pins);
}
static void codec_init(void)
{
int i;
/* Configure the Codec related IOs */
- codec_gpio_init();
+ setup_i2c_gpio();
/* reset the codec */
- gpio_clear(GPIOD, GPIO4);
+// gpio_clear(GPIOD, GPIO4);
for (i = 0; i < 1000000; i++) { /* Wait a bit. */
__asm__("NOP");
}
- gpio_set(GPIOD, GPIO4);
+// gpio_set(GPIOD, GPIO4);
i2cm_init();
}
-static int codec_write_reg(uint8_t reg, uint8_t val)
-{
- uint32_t i2c = I2C1;
-
- while ((I2C_SR2(i2c) & I2C_SR2_BUSY)) {
- }
-
- i2c_send_start(i2c);
-
- /* Wait for master mode selected */
- while (!((I2C_SR1(i2c) & I2C_SR1_SB)
- & (I2C_SR2(i2c) & (I2C_SR2_MSL | I2C_SR2_BUSY))));
-
- i2c_send_7bit_address(i2c, CODEC_ADDRESS, I2C_WRITE);
-
- /* Waiting for address is transferred. */
- while (!(I2C_SR1(i2c) & I2C_SR1_ADDR));
-
- /* Cleaning ADDR condition sequence. */
- uint32_t reg32 = I2C_SR2(i2c);
- (void) reg32; /* unused */
-
- /* Common above here */
-
- /* Sending the data. */
- i2c_send_data(i2c, reg);
- while (!(I2C_SR1(i2c) & (I2C_SR1_BTF)));
- i2c_send_data(i2c, val);
- while (!(I2C_SR1(i2c) & (I2C_SR1_BTF | I2C_SR1_TxE)));
-
- /* Send STOP condition. */
- i2c_send_stop(i2c);
- return 0;
-}
-
-static uint32_t codec_read_reg(uint8_t reg)
-{
- uint32_t i2c = I2C1;
-
- while ((I2C_SR2(i2c) & I2C_SR2_BUSY)) {
- }
-
- i2c_send_start(i2c);
-
- /* Wait for master mode selected */
- while (!((I2C_SR1(i2c) & I2C_SR1_SB)
- & (I2C_SR2(i2c) & (I2C_SR2_MSL | I2C_SR2_BUSY))));
-
- i2c_send_7bit_address(i2c, CODEC_ADDRESS, I2C_WRITE);
-
- /* Waiting for address is transferred. */
- while (!(I2C_SR1(i2c) & I2C_SR1_ADDR));
-
- /* Cleaning ADDR condition sequence. */
- uint32_t reg32 = I2C_SR2(i2c);
- (void) reg32; /* unused */
-
- /* Common stuff ABOVE HERE */
-
- i2c_send_data(i2c, reg);
- while (!(I2C_SR1(i2c) & (I2C_SR1_BTF)));
-
- i2c_send_start(i2c);
-
- /* Wait for master mode selected */
- while (!((I2C_SR1(i2c) & I2C_SR1_SB)
- & (I2C_SR2(i2c) & (I2C_SR2_MSL | I2C_SR2_BUSY))));
-
- i2c_send_7bit_address(i2c, CODEC_ADDRESS, I2C_READ);
-
- /* Waiting for address is transferred. */
- while (!(I2C_SR1(i2c) & I2C_SR1_ADDR));
-
- i2c_disable_ack(i2c);
-
- /* Cleaning ADDR condition sequence. */
- reg32 = I2C_SR2(i2c);
- (void) reg32; /* unused */
-
- i2c_send_stop(i2c);
-
- while (!(I2C_SR1(i2c) & I2C_SR1_RxNE));
- uint32_t result = i2c_get_data(i2c);
-
- i2c_enable_ack(i2c);
- I2C_SR1(i2c) &= ~I2C_SR1_AF;
- return result;
-}
-
-static void codec_readid(void)
-{
- uint8_t res = codec_read_reg(0x01);
- printf("raw res = %#x Codec is %#x (should be 0x1c), revision %d\n", res, res >> 3, res & 0x7);
-}
int main(void)
{
@@ -165,22 +70,13 @@ int main(void)
LED_DISCO_GREEN_PIN);
printf("hi guys!\n");
codec_init();
- codec_readid();
- codec_write_reg(0x14, 0xff);
- for (i = 0; i < 8; i++) {
- uint8_t pass_vol_a = codec_read_reg(0x14);
- printf("Passthrough vol A was: %#x\n", pass_vol_a);
- codec_write_reg(0x14, pass_vol_a >> 1);
- gpio_toggle(LED_DISCO_GREEN_PORT, LED_DISCO_GREEN_PIN);
- for (j = 0; j < 100000; j++) { /* Wait a bit. */
- __asm__("NOP");
- }
- }
-
- /* Nothing else to do */;
while (1) {
- ;
+ i2cm_task();
+ gpio_toggle(LED_DISCO_GREEN_PORT, LED_DISCO_GREEN_PIN);
+ for (i = 0; i < 0x800000; i++) { /* Wait a bit. */
+ __asm__("NOP");
+ }
}
return 0;
}
generated by cgit (git 2.34.1) at 2024-11-22 09:19:16 +0000