summaryrefslogtreecommitdiff
path: root/hardware
diff options
context:
space:
mode:
Diffstat (limited to 'hardware')
-rw-r--r--hardware/enclosure/olsndot_clamp_base.scad27
-rw-r--r--hardware/enclosure/olsndot_clamp_stoppers.scad2
2 files changed, 23 insertions, 6 deletions
diff --git a/hardware/enclosure/olsndot_clamp_base.scad b/hardware/enclosure/olsndot_clamp_base.scad
index e5bf43f..726a907 100644
--- a/hardware/enclosure/olsndot_clamp_base.scad
+++ b/hardware/enclosure/olsndot_clamp_base.scad
@@ -1,6 +1,23 @@
eps = 0.01;
-module clamp(l=90, w=20, h=10, d1=25, d2=35, o=10, hdia1=5, hdia2=10, hd=1, nw=7.8, nd=3, notch_sf=0.75, notch_d=2, notch_a=10, notch_o=1, edge_a=5, edge_d=12) {
+module clamp(
+ l=90,
+ w=14,
+ h=10,
+ d1=30,
+ d2=35,
+ o=10,
+ hdia1=5,
+ hdia2=10,
+ hd=5,
+ nw=7.8,
+ nd=3,
+ notch_sf=0.75,
+ notch_d=2,
+ notch_a=10,
+ notch_o=1,
+ edge_a=5,
+ edge_d=12) {
translate([-h-l/2, -w/2, 0]) union() {
translate([l+h-notch_d, 0, 0]) intersection() {
difference() {
@@ -19,9 +36,9 @@ module clamp(l=90, w=20, h=10, d1=25, d2=35, o=10, hdia1=5, hdia2=10, hd=1, nw=7
rotate([0, 45, 0]) translate([-l/2, -eps/2, -d2/8*7]) cube([l, w+eps, d2]);
translate([0, 0, d2]) rotate([0, 90+45, 0]) translate([-l/2, -eps/2, -d2/8*7]) cube([l, w+eps, d2]);
translate([-eps/2, w/2, d2-o]) rotate([0, 90, 0]) union() {
- cylinder(d=hdia1, h=l);
- cylinder(d=hdia2, h=hd);
- translate([0, 0, h-nd/2]) hexagon(nw, nd+2*eps);
+ cylinder(d=6, h=l);
+ cylinder(d=12, h=hd);
+ translate([-11/2, -11/2, h-4]) cube([11, 11, 5]);
}
}
}
@@ -37,7 +54,7 @@ nut_depth=5.5;
nut_off_y = 80/2;
nut_off_x = 20;
-module base($fn=25, cw=90, sw=15, sh=10, strut_spacing=30, clamp_dist=90) {
+module base($fn=25, cw=90, sw=15, sh=15, strut_spacing=30, clamp_dist=90) {
difference() {
translate([0, -clamp_dist/2, 0]) union() {
translate([0, clamp_dist, 0]) clamp(l=cw, h=sh);
diff --git a/hardware/enclosure/olsndot_clamp_stoppers.scad b/hardware/enclosure/olsndot_clamp_stoppers.scad
index 9ca8a63..8be528d 100644
--- a/hardware/enclosure/olsndot_clamp_stoppers.scad
+++ b/hardware/enclosure/olsndot_clamp_stoppers.scad
@@ -1,7 +1,7 @@
w = 20;
h = w;
d = 5;
-hole_dia = 5;
+hole_dia = 6;
hole_d = 4;
hole_fringe = 1.5;
fringe_extra = 1.0;