i2c-master: use library form of transfer functions

1 files changed, 0 insertions, 143 deletions

diff --git a/tests/i2c-master/i2c-master.c b/tests/i2c-master/i2c-master.c
index 469e66f..3adbbf0 100644
--- a/tests/i2c-master/i2c-master.c
+++ b/tests/i2c-master/i2c-master.c
@@ -25,149 +25,6 @@ enum sht21_cmd_e {
 	/* 0xfa, 0x0f to read serial */
 };
 
-// ------------------ section proposed to go up to libopencm3
-
-
-static void i2c_write7_v1(uint32_t i2c, int addr, uint8_t *data, size_t n)
-{
-#if defined(I2C_SR1)
-	while ((I2C_SR2(i2c) & I2C_SR2_BUSY)) {
-	}
-
-	i2c_send_start(i2c);
-
-	/* Wait for master mode selected */
-	while (!((I2C_SR1(i2c) & I2C_SR1_SB)
-		& (I2C_SR2(i2c) & (I2C_SR2_MSL | I2C_SR2_BUSY))));
-
-	i2c_send_7bit_address(i2c, addr, I2C_WRITE);
-
-	/* Waiting for address is transferred. */
-	while (!(I2C_SR1(i2c) & I2C_SR1_ADDR));
-
-	/* Cleaning ADDR condition sequence. */
-	uint32_t reg32 = I2C_SR2(i2c);
-	(void) reg32; /* unused */
-
-	size_t i;
-	for (i = 0; i < n; i++) {
-		i2c_send_data(i2c, data[i]);
-		while (!(I2C_SR1(i2c) & (I2C_SR1_BTF)));
-	}
-#endif
-}
-
-static void i2c_read7_v1(uint32_t i2c, int addr, uint8_t *res, int n)
-{
-#if defined(I2C_SR1)
-	i2c_send_start(i2c);
-	i2c_enable_ack(i2c);
-
-	/* Wait for master mode selected */
-	while (!((I2C_SR1(i2c) & I2C_SR1_SB)
-		& (I2C_SR2(i2c) & (I2C_SR2_MSL | I2C_SR2_BUSY))));
-
-	i2c_send_7bit_address(i2c, addr, I2C_READ);
-
-	/* Waiting for address is transferred. */
-	while (!(I2C_SR1(i2c) & I2C_SR1_ADDR));
-	/* Clearing ADDR condition sequence. */
-	uint32_t reg32 = I2C_SR2(i2c);
-	(void) reg32; /* unused */
-
-	int i = 0;
-	for (i = 0; i < n; ++i) {
-		if (i == n - 1) {
-			i2c_disable_ack(i2c);
-		}
-		while (!(I2C_SR1(i2c) & I2C_SR1_RxNE));
-		res[i] = i2c_get_data(i2c);
-	}
-	i2c_send_stop(i2c);
-
-	return;
-#endif
-}
-
-/* v1 isn't handling stop/start vs repeated start very well yet */
-/* probably good enough to merge, but... maybe not put the v1 in the library.*/
-static
-void i2c_transfer7_v1(uint32_t i2c, uint8_t addr, uint8_t *w, size_t wn, uint8_t *r, size_t rn) {
-	if (wn) {
-		i2c_write7_v1(i2c, addr, w, wn);
-	}
-	if (rn) {
-		i2c_read7_v1(i2c, addr, r, rn);
-	} else {
-		i2c_send_stop(i2c);
-	}
-}
-
-
-static
-void i2c_transfer7_v2(uint32_t i2c, uint8_t addr, uint8_t *w, size_t wn, uint8_t *r, size_t rn)
-{
-	int wait;
-	size_t i;
-	/*  waiting for busy is unnecessary. read the RM */
-	if (wn) {
-		i2c_set_7bit_address(i2c, addr);
-		i2c_set_write_transfer_dir(i2c);
-		i2c_set_bytes_to_transfer(i2c, wn);
-		if (rn) {
-			i2c_disable_autoend(i2c);
-		} else {
-			i2c_enable_autoend(i2c);
-		}
-		i2c_send_start(i2c);
-
-		while (wn--) {
-			wait = true;
-			while (wait) {
-				if (i2c_transmit_int_status(i2c)) {
-					wait = false;
-				}
-				while (i2c_nack(i2c)); /* FIXME Some error */
-			}
-			i2c_send_data(i2c, *w++);
-		}
-		/* not entirely sure this is really necessary.
-		 * RM implies it will stall until it can write out the later bits
-		 */
-		if (rn) {
-			while (!i2c_transfer_complete(i2c));
-		}
-	}
-
-	if (rn) {
-		/*Setting transfer properties*/
-		i2c_set_7bit_address(i2c, addr);
-		i2c_set_read_transfer_dir(i2c);
-		i2c_set_bytes_to_transfer(i2c, rn);
-		/*start transfer*/
-		i2c_send_start(i2c);
-		/* important to do it afterwards to do a proper repeated start! */
-		i2c_enable_autoend(i2c);
-
-		for (i = 0; i < rn; i++) {
-			while (i2c_received_data(i2c) == 0);
-			r[i] = i2c_get_data(i2c);
-		}
-	}
-
-}
-
-static
-void i2c_transfer7(uint32_t i2c, uint8_t addr, uint8_t *w, size_t wn, uint8_t *r, size_t rn)
-{
-#if defined I2C_SR2
-	i2c_transfer7_v1(i2c, addr, w, wn, r, rn);
-#else
-	i2c_transfer7_v2(i2c, addr, w, wn, r, rn);
-#endif
-}
-
-// --------------- end of upstream planned section
 
 void i2cm_init(void)
 {