adc-power: include f1 tests

3 files changed, 128 insertions, 0 deletions

diff --git a/tests/adc-power/Makefile.stm32f103-generic b/tests/adc-power/Makefile.stm32f103-generic
new file mode 100644
index 0000000..f71e4b5
--- /dev/null
+++ b/tests/adc-power/Makefile.stm32f103-generic
@@ -0,0 +1,38 @@
+##
+## This file is part of the libopencm3 project.
+##
+## This library is free software: you can redistribute it and/or modify
+## it under the terms of the GNU Lesser General Public License as published by
+## the Free Software Foundation, either version 3 of the License, or
+## (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public License
+## along with this library.  If not, see <http://www.gnu.org/licenses/>.
+##
+
+BOARD = stm32f103-generic
+PROJECT = adc-power-$(BOARD)
+BUILD_DIR = bin-$(BOARD)
+
+SHARED_DIR = ../../shared
+
+CFILES = main-$(BOARD).c
+CFILES += adc-power.c
+CFILES += trace.c trace_stdio.c
+
+VPATH += $(SHARED_DIR)
+
+INCLUDES += $(patsubst %,-I%, . $(SHARED_DIR))
+
+OPENCM3_DIR=../../libopencm3
+
+DEVICE=stm32f103x8
+#OOCD_INTERFACE = jlink
+#OOCD_TARGET = stm32f1x
+OOCD_FILE = openocd.stm32f103-generic.cfg
+include ../../rules.mk
diff --git a/tests/adc-power/adc-power.c b/tests/adc-power/adc-power.c
index 4ab5e23..0904bb3 100644
--- a/tests/adc-power/adc-power.c
+++ b/tests/adc-power/adc-power.c
@@ -23,10 +23,18 @@
 #if defined(STM32F0)
 #define SEPARATE_ADC_SAMPLING 0
 #define SAMPLE_TIME_BASIC ADC_SMPR_SMP_239DOT5 // 4usec or more for tempsensor
+#define HAS_CALIBRATION 1
+#elif defined(STM32F1)
+#define SEPARATE_ADC_SAMPLING 0
+#define SAMPLE_TIME_BASIC ADC_SMPR_SMP_28DOT5CYC // 17usecs or more. >~15cycles at 9Mhz
+#define SEPARATE_VREF 0
+#define HAS_CALIBRATION 1
+#define HAS_ROM_CALIBRATION 0
 #elif defined(STM32F3)
 #define SAMPLE_TIME_BASIC ADC_SMPR_SMP_181DOT5CYC
 #define SAMPLE_TIME_TEMP ADC_SMPR_SMP_601DOT5CYC // 2.2usecs or more
 #define SAMPLE_TIME_VREF SAMPLE_TIME_TEMP
+#define HAS_CALIBRATION 1
 #elif defined(STM32F4)
 #define SAMPLE_TIME_BASIC ADC_SMPR_SMP_28CYC
 #define SAMPLE_TIME_TEMP ADC_SMPR_SMP_144CYC // 10 usecs or more, in theory needs 840cycles!
@@ -42,6 +50,7 @@
 #define SAMPLE_TIME_BASIC ADC_SMPR_SMP_247DOT5CYC
 #define SAMPLE_TIME_TEMP ADC_SMPR_SMP_247DOT5CYC
 #define SAMPLE_TIME_VREF SAMPLE_TIME_TEMP
+#define HAS_CALIBRATION 1
 #else
 #error "no sample time for your target yet?!"
 #endif
@@ -52,6 +61,12 @@
 #ifndef SEPARATE_ADC_SAMPLING
 #define SEPARATE_ADC_SAMPLING 1
 #endif
+#ifndef HAS_CALIBRATION
+#define HAS_CALIBRATION 0
+#endif
+#ifndef HAS_ROM_CALIBRATION
+#define HAS_ROM_CALIBRATION 1
+#endif
 
 
 void adc_power_init(void)
@@ -116,25 +131,48 @@ static uint16_t read_adc_naiive(uint8_t channel)
 	uint8_t channel_array[16];
 	channel_array[0] = channel;
 	adc_set_regular_sequence(ADC1, 1, channel_array);
+	// FIXME - use a trigger, see f1 notes!
+#if defined (STM32F1)
+	adc_start_conversion_direct(ADC1);
+#else
 	adc_start_conversion_regular(ADC1);
+#endif
 	while (!adc_eoc(ADC1));
 	return adc_read_regular(ADC1);
 }
 
 static float adc_calc_tempf(unsigned int ts_v, unsigned int vref) {
+#if (HAS_ROM_CALIBRATION == 1)
 	float adjusted_vtemp = ts_v * ST_VREFINT_CAL * 1.0f / vref * 1.0f;
 	float slope = (110-30) * 1.0f / (ST_TSENSE_CAL2_110C - ST_TSENSE_CAL1_30C) * 1.0f;
 	return slope * (adjusted_vtemp - ST_TSENSE_CAL1_30C) + 30;
+#else
+	return ts_v * 1.0;
+#endif
 }
 
 static int adc_calc_tempi(unsigned int ts, unsigned int vref) {
+#if (HAS_ROM_CALIBRATION == 1)
 	int adjusted_vtemp = ts * ST_VREFINT_CAL / vref;
 	int slope = (110-30) / (ST_TSENSE_CAL2_110C - ST_TSENSE_CAL1_30C);
 	return slope * (adjusted_vtemp - ST_TSENSE_CAL1_30C) + 30;
+#else
+	return ts * 1.00;
+#endif
 }
 
 void adc_power_task_up(void) {
 	TIM_CNT(TIMER) = 0;
+	// Welcome to f1 world.
+#if defined (STM32F1)
+	adc_power_on(ADC1);
+	for (int i = 0; i < 0x80000; i++) { /* Wait a bit. */
+		__asm__("NOP");
+	}
+#endif
+#if (HAS_CALIBRATION == 1)
+	adc_calibrate(ADC1);
+#endif
 	adc_power_on(ADC1);
 	unsigned int td = TIM_CNT(TIMER);
 	
diff --git a/tests/adc-power/main-stm32f103-generic.c b/tests/adc-power/main-stm32f103-generic.c
new file mode 100644
index 0000000..815ab16
--- /dev/null
+++ b/tests/adc-power/main-stm32f103-generic.c
@@ -0,0 +1,52 @@
+/*
+ * Oct 2015 Karl Palsson <karlp@tweak.net.au>
+ */
+
+#include <errno.h>
+#include <stdio.h>
+#include <unistd.h>
+#include <libopencm3/cm3/nvic.h>
+#include <libopencm3/stm32/adc.h>
+#include <libopencm3/stm32/dac.h>
+#include <libopencm3/stm32/gpio.h>
+#include <libopencm3/stm32/rcc.h>
+#include <libopencm3/stm32/usart.h>
+
+#include "trace.h"
+#include "adc-power.h"
+
+#define LED_PORT GPIOC
+#define LED_PIN GPIO13
+
+int main(void)
+{
+	int i;
+	int j = 0;
+	rcc_clock_setup_in_hse_8mhz_out_72mhz();
+	rcc_periph_clock_enable(RCC_GPIOC);
+	printf("hi guys!\n");
+	/* green led for ticking */
+	gpio_set_mode(LED_PORT, GPIO_MODE_OUTPUT_2_MHZ, GPIO_CNF_OUTPUT_PUSHPULL, LED_PIN);
+
+	rcc_periph_clock_enable(RCC_GPIOA);
+	gpio_set_mode(GPIOA, GPIO_MODE_INPUT, GPIO_CNF_INPUT_ANALOG, GPIO0);
+        gpio_set_mode(GPIOA, GPIO_MODE_INPUT, GPIO_CNF_INPUT_ANALOG, GPIO5);
+
+
+	adc_power_init();
+	while (1) {
+		adc_power_task_up();
+		gpio_toggle(LED_PORT, LED_PIN);
+
+		for (i = 0; i < 0x80000; i++) { /* Wait a bit. */
+			__asm__("NOP");
+		}
+		adc_power_task_down();
+		gpio_toggle(LED_PORT, LED_PIN);
+		for (i = 0; i < 0x80000; i++) { /* Wait a bit. */
+			__asm__("NOP");
+		}
+	}
+
+	return 0;
+}