Add/reorg enclosure OpenSCAD files

1 files changed, 0 insertions, 105 deletions

diff --git a/hardware/enclosure/olsndot_clamp_base.scad b/hardware/enclosure/olsndot_clamp_base.scad
deleted file mode 100644
index ad09989..0000000
--- a/hardware/enclosure/olsndot_clamp_base.scad
+++ /dev/null
@@ -1,105 +0,0 @@
-eps = 0.01;
-
-module clamp(
-    l=90,
-    w=14,
-    h=10,
-    d1=30,
-    d2=35,
-    o=10,
-    hdia1=5,
-    hdia2=10,
-    hd=5,
-    nw=7.8,
-    nd=3,
-    notch_sf=0.75,
-    notch_d=3,
-    notch_a=10,
-    notch_o=0.5,
-    edge_a=5,
-    edge_d=12) {
-    translate([-h-l/2, -w/2, 0]) union() {
-        translate([l+h-notch_d, 0, 0]) intersection() {
-            difference() {
-                cube([d1, w, d1]);
-                //scale([notch_sf, 1, 1]) translate([(d1-h)/2, 0, h+(d1-h)/2]) rotate([0, -135, 0]) translate([0, -eps/2, 0]) cube([d1, w+eps, d1]);
-                translate([notch_d, 0, h+notch_o]) mirror([1, 0, 0]) rotate([0, notch_a, 0]) translate([0, -eps/2, 0]) cube([d1, w+eps, d1]);
-            }
-            translate([d1-edge_a, 0, d1/2]) rotate([0, -90-45, 0]) cube([2*d1, w+eps, 2*d1]);
-            translate([-d1-edge_d, 0]) cube([2*d1, w+eps, 2*d1]);
-        }
-        difference() {
-            union() {
-                cube ([l+h, w, h]);
-                cube ([h, w, d2]);
-            }
-            rotate([0, 45, 0]) translate([-l/2, -eps/2, -d2/8*7]) cube([l, w+eps, d2]);
-            translate([0, 0, d2]) rotate([0, 90+45, 0]) translate([-l/2, -eps/2, -d2/8*7]) cube([l, w+eps, d2]);
-            translate([-eps/2, w/2, d2-o]) rotate([0, 90, 0]) union() {
-                cylinder(d=6, h=l);
-                cylinder(d=12, h=hd);
-                translate([-11/2, -11/2, h-4]) cube([11, 11, 5]);
-            }
-        }
-    }
-}
-
-module hexagon(size, height) {
-  boxWidth = size/1.75;
-  for (r = [-60, 0, 60]) rotate([0,0,r]) cube([boxWidth, size, height], true);
-}
-
-nut_dia = 5.3;
-nut_depth=5.5;
-nut_off_y = 80/2;
-nut_off_x = 20;
-
-module nut_holder(
-    a = 30,
-    b = 15,
-    c = 10,
-    d = 5.0,
-    e = 4.0,
-    ) {
-        
-    difference() {
-        union() {
-            translate([-b/2, -(a-b)/2, 0]) cube([b, a-b, c]);
-            translate([0, -(a-b)/2, 0]) cylinder(d=b, h=c);
-            translate([0, (a-b)/2, 0]) cylinder(d=b, h=c);
-        }
-        translate([0,  a/2 - d, -eps]) {
-            translate([0, 0, c-nut_depth+2*eps]) cylinder(d=nut_dia, h=nut_depth);
-            cylinder(d=e, h=c+2*eps);
-        }
-        translate([0, -a/2 + d, -eps]) {
-            translate([0, 0, c-nut_depth+2*eps]) cylinder(d=nut_dia, h=nut_depth);
-            cylinder(d=e, h=c+2*eps);
-        }
-    }
-}
-
-module base($fn=25, cw=93, sw=15, sh=15, strut_spacing=30, clamp_dist=90) {
-    d = 30;
-    clamp(l=cw, h=sh);
-    translate([-d, 0, 0]) nut_holder();
-    translate([d, 0, 0]) nut_holder();
-    /*difference() {
-        translate([0, -clamp_dist/2, 0]) union() {
-    */
-            /*
-            translate([0,    0, 0]) clamp(l=cw, h=sh);
-            translate([-strut_spacing/2-sw, 0, 0]) cube([sw, clamp_dist, sh]);
-            translate([ strut_spacing/2, 0, 0]) cube([sw, clamp_dist, sh]);
-            */
-        //}
-        /*
-        translate([nut_off_x, nut_off_y, -eps]) cylinder(d=nut_dia, h=nut_depth+eps);
-        translate([nut_off_x, -nut_off_y, -eps]) cylinder(d=nut_dia, h=nut_depth+eps);
-        translate([-nut_off_x, nut_off_y, -eps]) cylinder(d=nut_dia, h=nut_depth+eps);
-        translate([-nut_off_x, -nut_off_y, -eps]) cylinder(d=nut_dia, h=nut_depth+eps);
-        */
-    //}
-}
-
-base();
\ No newline at end of file