diff options
Diffstat (limited to 'midi-dials/otter.jdebug')
| -rw-r--r-- | midi-dials/otter.jdebug | 311 |
1 files changed, 311 insertions, 0 deletions
diff --git a/midi-dials/otter.jdebug b/midi-dials/otter.jdebug new file mode 100644 index 0000000..920976d --- /dev/null +++ b/midi-dials/otter.jdebug @@ -0,0 +1,311 @@ +/********************************************************************* +* (c) SEGGER Microcontroller GmbH * +* The Embedded Experts * +* www.segger.com * +********************************************************************** + +File : +Created : 18 Apr 2020 23:08 +Ozone Version : V3.10g +*/ + +/********************************************************************* +* +* OnProjectLoad +* +* Function description +* Project load routine. Required. +* +********************************************************************** +*/ +void OnProjectLoad (void) { + // + // Dialog-generated settings + // + Project.AddPathSubstitute ("/home/janhenrik/STM32Cube/dials/midi-dials", "$(ProjectDir)"); + Project.AddPathSubstitute ("/home/janhenrik/stm32cube/dials/midi-dials", "$(ProjectDir)"); + Project.SetDevice ("STM32F072C8"); + Project.SetHostIF ("USB", ""); + Project.SetTargetIF ("SWD"); + Project.SetTIFSpeed ("1 MHz"); + Project.AddSvdFile ("/opt/SEGGER/ozone/3.10.7/Config/CPU/Cortex-M0.svd"); + // + // User settings + // + File.Open ("$(ProjectDir)/build/midi-dials.elf"); +} + +/********************************************************************* +* +* OnSnapshotLoad +* +* Function description +* Called upon loading a snapshot. Optional. +* +* Additional information +* This function is used to restore the target state in cases +* where values cannot simply be written to the target. +* Typical use: GPIO clock needs to be enabled, before +* GPIO is configured. +* +********************************************************************** +*/ +//void OnSnapshotLoad (void) { +//} + +/********************************************************************* +* +* OnSnapshotSave +* +* Function description +* Called upon saving a snapshot. Optional. +* +* Additional information +* This function is usually used to save values of the target +* state which can either not be trivially read, +* or need to be restored in a specific way or order. +* Typically use: Memory Mapped Registers, +* such as PLL and GPIO configuration. +* +********************************************************************** +*/ +//void OnSnapshotSave (void) { +//} + +/********************************************************************* +* +* OnError +* +* Function description +* Called when an error or unexpected condition ocurred. Optional. +* +********************************************************************** +*/ +//void OnError (const char* sErrorMsg) { +//} + +/********************************************************************* +* +* TargetReset +* +* Function description +* Replaces the default target device reset routine. Optional. +* +* Notes +* This example demonstrates the usage when +* debugging a RAM program on a Cortex-M target device +* +********************************************************************** +*/ +//void TargetReset (void) { +// +// unsigned int SP; +// unsigned int PC; +// unsigned int VectorTableAddr; +// +// VectorTableAddr = Program.GetBaseAddr(); +// +// if (VectorTableAddr != 0xFFFFFFFF) { +// SP = Target.ReadU32(VectorTableAddr); +// Target.SetReg("SP", SP); +// } else { +// Util.Log("Project file error: failed to get program base"); +// } +// +// PC = Elf.GetEntryPointPC(); +// +// if (PC != 0xFFFFFFFF) { +// Target.SetReg("PC", PC); +// } else if (VectorTableAddr != 0xFFFFFFFF) { +// PC = Target.ReadU32(VectorTableAddr + 4); +// Target.SetReg("PC", PC); +//} +/********************************************************************* +* +* BeforeTargetReset +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void BeforeTargetReset (void) { +//} + +/********************************************************************* +* +* AfterTargetReset +* +* Function description +* Event handler routine. +* - Sets the PC register to program reset value. +* - Sets the SP register to program reset value on Cortex-M. +* +********************************************************************** +*/ +void AfterTargetReset (void) { + unsigned int SP; + unsigned int PC; + unsigned int VectorTableAddr; + + VectorTableAddr = Elf.GetBaseAddr(); + + if (VectorTableAddr != 0xFFFFFFFF) { + SP = Target.ReadU32(VectorTableAddr); + Target.SetReg("SP", SP); + } else { + Util.Log("Project file error: failed to get program base"); + } + + PC = Elf.GetEntryPointPC(); + + if (PC != 0xFFFFFFFF) { + Target.SetReg("PC", PC); + } else if (VectorTableAddr != 0xFFFFFFFF) { + PC = Target.ReadU32(VectorTableAddr + 4); + Target.SetReg("PC", PC); + } +} + +/********************************************************************* +* +* DebugStart +* +* Function description +* Replaces the default debug session startup routine. Optional. +* +********************************************************************** +*/ +//void DebugStart (void) { +//} + +/********************************************************************* +* +* TargetConnect +* +* Function description +* Replaces the default target IF connection routine. Optional. +* +********************************************************************** +*/ +//void TargetConnect (void) { +//} + +/********************************************************************* +* +* BeforeTargetConnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void BeforeTargetConnect (void) { +//} + +/********************************************************************* +* +* AfterTargetConnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void AfterTargetConnect (void) { +//} + +/********************************************************************* +* +* TargetDownload +* +* Function description +* Replaces the default program download routine. Optional. +* +********************************************************************** +*/ +//void TargetDownload (void) { +//} + +/********************************************************************* +* +* BeforeTargetDownload +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void BeforeTargetDownload (void) { +//} + +/********************************************************************* +* +* AfterTargetDownload +* +* Function description +* Event handler routine. +* - Sets the PC register to program reset value. +* - Sets the SP register to program reset value on Cortex-M. +* +********************************************************************** +*/ +void AfterTargetDownload (void) { + unsigned int SP; + unsigned int PC; + unsigned int VectorTableAddr; + + VectorTableAddr = Elf.GetBaseAddr(); + + if (VectorTableAddr != 0xFFFFFFFF) { + SP = Target.ReadU32(VectorTableAddr); + Target.SetReg("SP", SP); + } else { + Util.Log("Project file error: failed to get program base"); + } + + PC = Elf.GetEntryPointPC(); + + if (PC != 0xFFFFFFFF) { + Target.SetReg("PC", PC); + } else if (VectorTableAddr != 0xFFFFFFFF) { + PC = Target.ReadU32(VectorTableAddr + 4); + Target.SetReg("PC", PC); + } +} + +/********************************************************************* +* +* BeforeTargetDisconnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void BeforeTargetDisconnect (void) { +//} + +/********************************************************************* +* +* AfterTargetDisconnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void AfterTargetDisconnect (void) { +//} + +/********************************************************************* +* +* AfterTargetHalt +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void AfterTargetHalt (void) { +//} |