diff options
Diffstat (limited to 'hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_comp.c')
| -rw-r--r-- | hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_comp.c | 984 |
1 files changed, 0 insertions, 984 deletions
diff --git a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_comp.c b/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_comp.c deleted file mode 100644 index 6b42523..0000000 --- a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_comp.c +++ /dev/null @@ -1,984 +0,0 @@ -/**
- ******************************************************************************
- * @file stm32f0xx_hal_comp.c
- * @author MCD Application Team
- * @brief COMP HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the COMP peripheral:
- * + Initialization/de-initialization functions
- * + I/O operation functions
- * + Peripheral Control functions
- * + Peripheral State functions
- *
- @verbatim
-================================================================================
- ##### COMP Peripheral features #####
-================================================================================
-
- [..]
- The STM32F0xx device family integrates up to 2 analog comparators COMP1 and COMP2:
- (+) The non inverting input and inverting input can be set to GPIO pins.
-
- (+) The COMP output is available using HAL_COMP_GetOutputLevel()
- and can be set on GPIO pins.
-
- (+) The COMP output can be redirected to embedded timers (TIM1, TIM2 and TIM3).
-
- (+) The comparators COMP1 and COMP2 can be combined in window mode.
-
- (+) The comparators have interrupt capability with wake-up
- from Sleep and Stop modes (through the EXTI controller):
- (++) COMP1 is internally connected to EXTI Line 21
- (++) COMP2 is internally connected to EXTI Line 22
-
- (+) From the corresponding IRQ handler, the right interrupt source can be retrieved with the
- macros __HAL_COMP_COMP1_EXTI_GET_FLAG() and __HAL_COMP_COMP2_EXTI_GET_FLAG().
-
-
- ##### How to use this driver #####
-================================================================================
- [..]
- This driver provides functions to configure and program the Comparators of STM32F05x, STM32F07x and STM32F09x devices.
-
- To use the comparator, perform the following steps:
-
- (#) Fill in the HAL_COMP_MspInit() to
- (++) Configure the comparator input in analog mode using HAL_GPIO_Init()
- (++) Configure the comparator output in alternate function mode using HAL_GPIO_Init() to map the comparator
- output to the GPIO pin
- (++) If required enable the COMP interrupt by configuring and enabling EXTI line in Interrupt mode and
- selecting the desired sensitivity level using HAL_GPIO_Init() function. After that enable the comparator
- interrupt vector using HAL_NVIC_EnableIRQ() function.
-
- (#) Configure the comparator using HAL_COMP_Init() function:
- (++) Select the inverting input (input minus)
- (++) Select the non inverting input (input plus)
- (++) Select the output polarity
- (++) Select the output redirection
- (++) Select the hysteresis level
- (++) Select the power mode
- (++) Select the event/interrupt mode
- (++) Select the window mode
-
- -@@- HAL_COMP_Init() calls internally __HAL_RCC_SYSCFG_CLK_ENABLE() in order
- to access the comparator(s) registers.
-
- (#) Enable the comparator using HAL_COMP_Start() function or HAL_COMP_Start_IT() function for interrupt mode.
-
- (#) Use HAL_COMP_TriggerCallback() and/or HAL_COMP_GetOutputLevel() functions
- to manage comparator outputs (event/interrupt triggered and output level).
-
- (#) Disable the comparator using HAL_COMP_Stop() or HAL_COMP_Stop_IT()
- function.
-
- (#) De-initialize the comparator using HAL_COMP_DeInit() function.
-
- (#) For safety purposes comparator(s) can be locked using HAL_COMP_Lock() function.
- Only a MCU reset can reset that protection.
-
- *** Callback registration ***
- =============================================
- [..]
-
- The compilation flag USE_HAL_COMP_REGISTER_CALLBACKS, when set to 1,
- allows the user to configure dynamically the driver callbacks.
- Use Functions @ref HAL_COMP_RegisterCallback()
- to register an interrupt callback.
- [..]
-
- Function @ref HAL_COMP_RegisterCallback() allows to register following callbacks:
- (+) OperationCpltCallback : callback for End of operation.
- (+) ErrorCallback : callback for error detection.
- (+) MspInitCallback : callback for Msp Init.
- (+) MspDeInitCallback : callback for Msp DeInit.
- This function takes as parameters the HAL peripheral handle, the Callback ID
- and a pointer to the user callback function.
- [..]
-
- Use function @ref HAL_COMP_UnRegisterCallback to reset a callback to the default
- weak function.
- [..]
-
- @ref HAL_COMP_UnRegisterCallback takes as parameters the HAL peripheral handle,
- and the Callback ID.
- This function allows to reset following callbacks:
- (+) OperationCpltCallback : callback for End of operation.
- (+) ErrorCallback : callback for error detection.
- (+) MspInitCallback : callback for Msp Init.
- (+) MspDeInitCallback : callback for Msp DeInit.
- [..]
-
- By default, after the @ref HAL_COMP_Init() and when the state is @ref HAL_COMP_STATE_RESET
- all callbacks are set to the corresponding weak functions:
- examples @ref HAL_COMP_OperationCpltCallback(), @ref HAL_COMP_ErrorCallback().
- Exception done for MspInit and MspDeInit functions that are
- reset to the legacy weak functions in the @ref HAL_COMP_Init()/ @ref HAL_COMP_DeInit() only when
- these callbacks are null (not registered beforehand).
- [..]
-
- If MspInit or MspDeInit are not null, the @ref HAL_COMP_Init()/ @ref HAL_COMP_DeInit()
- keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state.
- [..]
-
- Callbacks can be registered/unregistered in @ref HAL_COMP_STATE_READY state only.
- Exception done MspInit/MspDeInit functions that can be registered/unregistered
- in @ref HAL_COMP_STATE_READY or @ref HAL_COMP_STATE_RESET state,
- thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit.
- [..]
-
- Then, the user first registers the MspInit/MspDeInit user callbacks
- using @ref HAL_COMP_RegisterCallback() before calling @ref HAL_COMP_DeInit()
- or @ref HAL_COMP_Init() function.
- [..]
-
- When the compilation flag USE_HAL_COMP_REGISTER_CALLBACKS is set to 0 or
- not defined, the callback registration feature is not available and all callbacks
- are set to the corresponding weak functions.
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/*
- Additional Tables:
-
- Table 1. COMP Inputs for the STM32F05x, STM32F07x and STM32F09x devices
- +--------------------------------------------------+
- | | | COMP1 | COMP2 |
- |-----------------|----------------|---------------|
- | | 1/4 VREFINT | OK | OK |
- | | 1/2 VREFINT | OK | OK |
- | | 3/4 VREFINT | OK | OK |
- | Inverting Input | VREFINT | OK | OK |
- | | DAC1 OUT (PA4) | OK | OK |
- | | DAC2 OUT (PA5) | OK | OK |
- | | IO1 | PA0 | PA2 |
- |-----------------|----------------|-------|-------|
- | Non Inverting | | PA1 | PA3 |
- | Input | | | |
- +--------------------------------------------------+
-
- Table 2. COMP Outputs for the STM32F05x, STM32F07x and STM32F09x devices
- +---------------+
- | COMP1 | COMP2 |
- |-------|-------|
- | PA0 | PA2 |
- | PA6 | PA7 |
- | PA11 | PA12 |
- +---------------+
-
- Table 3. COMP Outputs redirection to embedded timers for the STM32F05x, STM32F07x and STM32F09x devices
- +---------------------------------+
- | COMP1 | COMP2 |
- |----------------|----------------|
- | TIM1 BKIN | TIM1 BKIN |
- | | |
- | TIM1 OCREFCLR | TIM1 OCREFCLR |
- | | |
- | TIM1 IC1 | TIM1 IC1 |
- | | |
- | TIM2 IC4 | TIM2 IC4 |
- | | |
- | TIM2 OCREFCLR | TIM2 OCREFCLR |
- | | |
- | TIM3 IC1 | TIM3 IC1 |
- | | |
- | TIM3 OCREFCLR | TIM3 OCREFCLR |
- +---------------------------------+
-
-*/
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_hal.h"
-
-#ifdef HAL_COMP_MODULE_ENABLED
-
-#if defined (COMP1) || defined (COMP2)
-
-/** @addtogroup STM32F0xx_HAL_Driver
- * @{
- */
-
-/** @defgroup COMP COMP
- * @brief COMP HAL module driver
- * @{
- */
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-
-/** @defgroup COMP_Private_Constants COMP Private Constants
- * @{
- */
-
-/* Delay for COMP startup time. */
-/* Note: Delay required to reach propagation delay specification. */
-/* Literal set to maximum value (refer to device datasheet, */
-/* parameter "tSTART"). */
-/* Unit: us */
-#define COMP_DELAY_STARTUP_US (60U) /*!< Delay for COMP startup time */
-
-/* CSR register reset value */
-#define COMP_CSR_RESET_VALUE (0x00000000U)
-/* CSR register masks */
-#define COMP_CSR_RESET_PARAMETERS_MASK (0x00003FFFU)
-#define COMP_CSR_UPDATE_PARAMETERS_MASK (0x00003FFEU)
-/* CSR COMPx non inverting input mask */
-#define COMP_CSR_COMPxNONINSEL_MASK ((uint16_t)COMP_CSR_COMP1SW1)
-/* CSR COMP2 shift */
-#define COMP_CSR_COMP1_SHIFT 0U
-#define COMP_CSR_COMP2_SHIFT 16U
-/**
- * @}
- */
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/** @defgroup COMP_Exported_Functions COMP Exported Functions
- * @{
- */
-
-/** @defgroup COMP_Exported_Functions_Group1 Initialization/de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ===============================================================================
- ##### Initialization and Configuration functions #####
- ===============================================================================
- [..] This section provides functions to initialize and de-initialize comparators
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the COMP according to the specified
- * parameters in the COMP_InitTypeDef and create the associated handle.
- * @note If the selected comparator is locked, initialization can't be performed.
- * To unlock the configuration, perform a system reset.
- * @param hcomp COMP handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_COMP_Init(COMP_HandleTypeDef *hcomp)
-{
- HAL_StatusTypeDef status = HAL_OK;
- uint32_t regshift = COMP_CSR_COMP1_SHIFT;
-
- /* Check the COMP handle allocation and lock status */
- if((hcomp == NULL) || ((hcomp->State & COMP_STATE_BIT_LOCK) != RESET))
- {
- status = HAL_ERROR;
- }
- else
- {
- /* Check the parameter */
- assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance));
- assert_param(IS_COMP_INVERTINGINPUT(hcomp->Init.InvertingInput));
- assert_param(IS_COMP_NONINVERTINGINPUT(hcomp->Init.NonInvertingInput));
- assert_param(IS_COMP_OUTPUT(hcomp->Init.Output));
- assert_param(IS_COMP_OUTPUTPOL(hcomp->Init.OutputPol));
- assert_param(IS_COMP_HYSTERESIS(hcomp->Init.Hysteresis));
- assert_param(IS_COMP_MODE(hcomp->Init.Mode));
-
- if(hcomp->Init.NonInvertingInput == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED)
- {
- assert_param(IS_COMP_DAC1SWITCH_INSTANCE(hcomp->Instance));
- }
-
- if(hcomp->Init.WindowMode != COMP_WINDOWMODE_DISABLE)
- {
- assert_param(IS_COMP_WINDOWMODE_INSTANCE(hcomp->Instance));
- }
-
- /* Init SYSCFG and the low level hardware to access comparators */
- __HAL_RCC_SYSCFG_CLK_ENABLE();
-
-#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1)
- /* Init the COMP Callback settings */
- hcomp->TriggerCallback = HAL_COMP_TriggerCallback; /* Legacy weak callback */
-
- if (hcomp->MspInitCallback == NULL)
- {
- hcomp->MspInitCallback = HAL_COMP_MspInit; /* Legacy weak MspInit */
- }
-
- /* Init the low level hardware */
- hcomp->MspInitCallback(hcomp);
-#else
- /* Init the low level hardware : SYSCFG to access comparators */
- HAL_COMP_MspInit(hcomp);
-#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */
-
- if(hcomp->State == HAL_COMP_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hcomp->Lock = HAL_UNLOCKED;
- }
-
- /* Change COMP peripheral state */
- hcomp->State = HAL_COMP_STATE_BUSY;
-
- /* Set COMP parameters */
- /* Set COMPxINSEL bits according to hcomp->Init.InvertingInput value */
- /* Set COMPxOUTSEL bits according to hcomp->Init.Output value */
- /* Set COMPxPOL bit according to hcomp->Init.OutputPol value */
- /* Set COMPxHYST bits according to hcomp->Init.Hysteresis value */
- /* Set COMPxMODE bits according to hcomp->Init.Mode value */
- if(hcomp->Instance == COMP2)
- {
- regshift = COMP_CSR_COMP2_SHIFT;
- }
- MODIFY_REG(COMP->CSR,
- (COMP_CSR_COMPxINSEL | COMP_CSR_COMPxNONINSEL_MASK | \
- COMP_CSR_COMPxOUTSEL | COMP_CSR_COMPxPOL | \
- COMP_CSR_COMPxHYST | COMP_CSR_COMPxMODE) << regshift,
- (hcomp->Init.InvertingInput | \
- hcomp->Init.NonInvertingInput | \
- hcomp->Init.Output | \
- hcomp->Init.OutputPol | \
- hcomp->Init.Hysteresis | \
- hcomp->Init.Mode) << regshift);
-
- if(hcomp->Init.WindowMode != COMP_WINDOWMODE_DISABLE)
- {
- COMP->CSR |= COMP_CSR_WNDWEN;
- }
-
- /* Initialize the COMP state*/
- hcomp->State = HAL_COMP_STATE_READY;
- }
-
- return status;
-}
-
-/**
- * @brief DeInitializes the COMP peripheral
- * @note Deinitialization can't be performed if the COMP configuration is locked.
- * To unlock the configuration, perform a system reset.
- * @param hcomp COMP handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_COMP_DeInit(COMP_HandleTypeDef *hcomp)
-{
- HAL_StatusTypeDef status = HAL_OK;
- uint32_t regshift = COMP_CSR_COMP1_SHIFT;
-
- /* Check the COMP handle allocation and lock status */
- if((hcomp == NULL) || ((hcomp->State & COMP_STATE_BIT_LOCK) != RESET))
- {
- status = HAL_ERROR;
- }
- else
- {
- /* Check the parameter */
- assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance));
-
- /* Set COMP_CSR register to reset value for the corresponding COMP instance */
- if(hcomp->Instance == COMP2)
- {
- regshift = COMP_CSR_COMP2_SHIFT;
- }
- MODIFY_REG(COMP->CSR,
- COMP_CSR_RESET_PARAMETERS_MASK << regshift,
- COMP_CSR_RESET_VALUE << regshift);
-
-#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1)
- if (hcomp->MspDeInitCallback == NULL)
- {
- hcomp->MspDeInitCallback = HAL_COMP_MspDeInit; /* Legacy weak MspDeInit */
- }
-
- /* DeInit the low level hardware: SYSCFG, GPIO, CLOCK and NVIC */
- hcomp->MspDeInitCallback(hcomp);
-#else
- /* DeInit the low level hardware: SYSCFG, GPIO, CLOCK and NVIC */
- HAL_COMP_MspDeInit(hcomp);
-#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */
-
- hcomp->State = HAL_COMP_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(hcomp);
- }
-
- return status;
-}
-
-/**
- * @brief Initializes the COMP MSP.
- * @param hcomp COMP handle
- * @retval None
- */
-__weak void HAL_COMP_MspInit(COMP_HandleTypeDef *hcomp)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(hcomp);
-
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_COMP_MspInit could be implenetd in the user file
- */
-}
-
-/**
- * @brief DeInitializes COMP MSP.
- * @param hcomp COMP handle
- * @retval None
- */
-__weak void HAL_COMP_MspDeInit(COMP_HandleTypeDef *hcomp)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(hcomp);
-
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_COMP_MspDeInit could be implenetd in the user file
- */
-}
-
-#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1)
-/**
- * @brief Register a User COMP Callback
- * To be used instead of the weak predefined callback
- * @param hcomp Pointer to a COMP_HandleTypeDef structure that contains
- * the configuration information for the specified COMP.
- * @param CallbackID ID of the callback to be registered
- * This parameter can be one of the following values:
- * @arg @ref HAL_COMP_TRIGGER_CB_ID Trigger callback ID
- * @arg @ref HAL_COMP_MSPINIT_CB_ID MspInit callback ID
- * @arg @ref HAL_COMP_MSPDEINIT_CB_ID MspDeInit callback ID
- * @param pCallback pointer to the Callback function
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_COMP_RegisterCallback(COMP_HandleTypeDef *hcomp, HAL_COMP_CallbackIDTypeDef CallbackID, pCOMP_CallbackTypeDef pCallback)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- if (pCallback == NULL)
- {
- /* Update the error code */
- hcomp->ErrorCode |= HAL_COMP_ERROR_INVALID_CALLBACK;
-
- return HAL_ERROR;
- }
-
- if (HAL_COMP_STATE_READY == hcomp->State)
- {
- switch (CallbackID)
- {
- case HAL_COMP_TRIGGER_CB_ID :
- hcomp->TriggerCallback = pCallback;
- break;
-
- case HAL_COMP_MSPINIT_CB_ID :
- hcomp->MspInitCallback = pCallback;
- break;
-
- case HAL_COMP_MSPDEINIT_CB_ID :
- hcomp->MspDeInitCallback = pCallback;
- break;
-
- default :
- /* Update the error code */
- hcomp->ErrorCode |= HAL_COMP_ERROR_INVALID_CALLBACK;
-
- /* Return error status */
- status = HAL_ERROR;
- break;
- }
- }
- else if (HAL_COMP_STATE_RESET == hcomp->State)
- {
- switch (CallbackID)
- {
- case HAL_COMP_MSPINIT_CB_ID :
- hcomp->MspInitCallback = pCallback;
- break;
-
- case HAL_COMP_MSPDEINIT_CB_ID :
- hcomp->MspDeInitCallback = pCallback;
- break;
-
- default :
- /* Update the error code */
- hcomp->ErrorCode |= HAL_COMP_ERROR_INVALID_CALLBACK;
-
- /* Return error status */
- status = HAL_ERROR;
- break;
- }
- }
- else
- {
- /* Update the error code */
- hcomp->ErrorCode |= HAL_COMP_ERROR_INVALID_CALLBACK;
-
- /* Return error status */
- status = HAL_ERROR;
- }
-
- return status;
-}
-
-/**
- * @brief Unregister a COMP Callback
- * COMP callback is redirected to the weak predefined callback
- * @param hcomp Pointer to a COMP_HandleTypeDef structure that contains
- * the configuration information for the specified COMP.
- * @param CallbackID ID of the callback to be unregistered
- * This parameter can be one of the following values:
- * @arg @ref HAL_COMP_TRIGGER_CB_ID Trigger callback ID
- * @arg @ref HAL_COMP_MSPINIT_CB_ID MspInit callback ID
- * @arg @ref HAL_COMP_MSPDEINIT_CB_ID MspDeInit callback ID
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_COMP_UnRegisterCallback(COMP_HandleTypeDef *hcomp, HAL_COMP_CallbackIDTypeDef CallbackID)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- if (HAL_COMP_STATE_READY == hcomp->State)
- {
- switch (CallbackID)
- {
- case HAL_COMP_TRIGGER_CB_ID :
- hcomp->TriggerCallback = HAL_COMP_TriggerCallback; /* Legacy weak callback */
- break;
-
- case HAL_COMP_MSPINIT_CB_ID :
- hcomp->MspInitCallback = HAL_COMP_MspInit; /* Legacy weak MspInit */
- break;
-
- case HAL_COMP_MSPDEINIT_CB_ID :
- hcomp->MspDeInitCallback = HAL_COMP_MspDeInit; /* Legacy weak MspDeInit */
- break;
-
- default :
- /* Update the error code */
- hcomp->ErrorCode |= HAL_COMP_ERROR_INVALID_CALLBACK;
-
- /* Return error status */
- status = HAL_ERROR;
- break;
- }
- }
- else if (HAL_COMP_STATE_RESET == hcomp->State)
- {
- switch (CallbackID)
- {
- case HAL_COMP_MSPINIT_CB_ID :
- hcomp->MspInitCallback = HAL_COMP_MspInit; /* Legacy weak MspInit */
- break;
-
- case HAL_COMP_MSPDEINIT_CB_ID :
- hcomp->MspDeInitCallback = HAL_COMP_MspDeInit; /* Legacy weak MspDeInit */
- break;
-
- default :
- /* Update the error code */
- hcomp->ErrorCode |= HAL_COMP_ERROR_INVALID_CALLBACK;
-
- /* Return error status */
- status = HAL_ERROR;
- break;
- }
- }
- else
- {
- /* Update the error code */
- hcomp->ErrorCode |= HAL_COMP_ERROR_INVALID_CALLBACK;
-
- /* Return error status */
- status = HAL_ERROR;
- }
-
- return status;
-}
-
-#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */
-
-/**
- * @}
- */
-
-/** @defgroup COMP_Exported_Functions_Group2 I/O operation functions
- * @brief Data transfers functions
- *
-@verbatim
- ===============================================================================
- ##### IO operation functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to manage the COMP data
- transfers.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Start the comparator
- * @param hcomp COMP handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_COMP_Start(COMP_HandleTypeDef *hcomp)
-{
- uint32_t wait_loop_index = 0U;
- HAL_StatusTypeDef status = HAL_OK;
- uint32_t regshift = COMP_CSR_COMP1_SHIFT;
-
- /* Check the COMP handle allocation and lock status */
- if((hcomp == NULL) || ((hcomp->State & COMP_STATE_BIT_LOCK) != RESET))
- {
- status = HAL_ERROR;
- }
- else
- {
- /* Check the parameter */
- assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance));
-
- if(hcomp->State == HAL_COMP_STATE_READY)
- {
- /* Enable the selected comparator */
- if(hcomp->Instance == COMP2)
- {
- regshift = COMP_CSR_COMP2_SHIFT;
- }
- SET_BIT(COMP->CSR, COMP_CSR_COMPxEN << regshift);
-
- /* Set HAL COMP handle state */
- hcomp->State = HAL_COMP_STATE_BUSY;
-
- /* Delay for COMP startup time */
- wait_loop_index = (COMP_DELAY_STARTUP_US * (SystemCoreClock / 1000000U));
- while(wait_loop_index != 0U)
- {
- wait_loop_index--;
- }
- }
- else
- {
- status = HAL_ERROR;
- }
- }
-
- return status;
-}
-
-/**
- * @brief Stop the comparator
- * @param hcomp COMP handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_COMP_Stop(COMP_HandleTypeDef *hcomp)
-{
- HAL_StatusTypeDef status = HAL_OK;
- uint32_t regshift = COMP_CSR_COMP1_SHIFT;
-
- /* Check the COMP handle allocation and lock status */
- if((hcomp == NULL) || ((hcomp->State & COMP_STATE_BIT_LOCK) != RESET))
- {
- status = HAL_ERROR;
- }
- else
- {
- /* Check the parameter */
- assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance));
-
- if(hcomp->State == HAL_COMP_STATE_BUSY)
- {
- /* Disable the selected comparator */
- if(hcomp->Instance == COMP2)
- {
- regshift = COMP_CSR_COMP2_SHIFT;
- }
- CLEAR_BIT(COMP->CSR, COMP_CSR_COMPxEN << regshift);
-
- hcomp->State = HAL_COMP_STATE_READY;
- }
- else
- {
- status = HAL_ERROR;
- }
- }
-
- return status;
-}
-
-/**
- * @brief Enables the interrupt and starts the comparator
- * @param hcomp COMP handle
- * @retval HAL status.
- */
-HAL_StatusTypeDef HAL_COMP_Start_IT(COMP_HandleTypeDef *hcomp)
-{
- HAL_StatusTypeDef status = HAL_OK;
- uint32_t extiline = 0U;
-
- /* Check the parameter */
- assert_param(IS_COMP_TRIGGERMODE(hcomp->Init.TriggerMode));
-
- status = HAL_COMP_Start(hcomp);
- if(status == HAL_OK)
- {
- /* Check the Exti Line output configuration */
- extiline = COMP_GET_EXTI_LINE(hcomp->Instance);
- /* Configure the rising edge */
- if((hcomp->Init.TriggerMode & COMP_TRIGGERMODE_IT_RISING) != RESET)
- {
- SET_BIT(EXTI->RTSR, extiline);
- }
- else
- {
- CLEAR_BIT(EXTI->RTSR, extiline);
- }
- /* Configure the falling edge */
- if((hcomp->Init.TriggerMode & COMP_TRIGGERMODE_IT_FALLING) != RESET)
- {
- SET_BIT(EXTI->FTSR, extiline);
- }
- else
- {
- CLEAR_BIT(EXTI->FTSR, extiline);
- }
-
- /* Clear COMP EXTI pending bit */
- WRITE_REG(EXTI->PR, extiline);
-
- /* Enable Exti interrupt mode */
- SET_BIT(EXTI->IMR, extiline);
- }
-
- return status;
-}
-
-/**
- * @brief Disable the interrupt and Stop the comparator
- * @param hcomp COMP handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_COMP_Stop_IT(COMP_HandleTypeDef *hcomp)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- /* Disable the Exti Line interrupt mode */
- CLEAR_BIT(EXTI->IMR, COMP_GET_EXTI_LINE(hcomp->Instance));
-
- status = HAL_COMP_Stop(hcomp);
-
- return status;
-}
-
-/**
- * @brief Comparator IRQ Handler
- * @param hcomp COMP handle
- * @retval HAL status
- */
-void HAL_COMP_IRQHandler(COMP_HandleTypeDef *hcomp)
-{
- uint32_t extiline = COMP_GET_EXTI_LINE(hcomp->Instance);
-
- /* Check COMP Exti flag */
- if(READ_BIT(EXTI->PR, extiline) != RESET)
- {
- /* Clear COMP Exti pending bit */
- WRITE_REG(EXTI->PR, extiline);
-
- /* COMP trigger callback */
-#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1)
- hcomp->TriggerCallback(hcomp);
-#else
- HAL_COMP_TriggerCallback(hcomp);
-#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */
- }
-}
-
-/**
- * @}
- */
-
-/** @defgroup COMP_Exported_Functions_Group3 Peripheral Control functions
- * @brief management functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral Control functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to control the COMP data
- transfers.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Lock the selected comparator configuration.
- * @param hcomp COMP handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp)
-{
- HAL_StatusTypeDef status = HAL_OK;
- uint32_t regshift = COMP_CSR_COMP1_SHIFT;
-
- /* Check the COMP handle allocation and lock status */
- if((hcomp == NULL) || ((hcomp->State & COMP_STATE_BIT_LOCK) != RESET))
- {
- status = HAL_ERROR;
- }
- else
- {
- /* Check the parameter */
- assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance));
-
- /* Set lock flag */
- hcomp->State |= COMP_STATE_BIT_LOCK;
-
- /* Set the lock bit corresponding to selected comparator */
- if(hcomp->Instance == COMP2)
- {
- regshift = COMP_CSR_COMP2_SHIFT;
- }
- SET_BIT(COMP->CSR, COMP_CSR_COMPxLOCK << regshift);
- }
-
- return status;
-}
-
-/**
- * @brief Return the output level (high or low) of the selected comparator.
- * The output level depends on the selected polarity.
- * If the polarity is not inverted:
- * - Comparator output is low when the non-inverting input is at a lower
- * voltage than the inverting input
- * - Comparator output is high when the non-inverting input is at a higher
- * voltage than the inverting input
- * If the polarity is inverted:
- * - Comparator output is high when the non-inverting input is at a lower
- * voltage than the inverting input
- * - Comparator output is low when the non-inverting input is at a higher
- * voltage than the inverting input
- * @param hcomp COMP handle
- * @retval Returns the selected comparator output level: COMP_OUTPUTLEVEL_LOW or COMP_OUTPUTLEVEL_HIGH.
- *
- */
-uint32_t HAL_COMP_GetOutputLevel(COMP_HandleTypeDef *hcomp)
-{
- uint32_t level=0;
- uint32_t regshift = COMP_CSR_COMP1_SHIFT;
-
- /* Check the parameter */
- assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance));
-
- if(hcomp->Instance == COMP2)
- {
- regshift = COMP_CSR_COMP2_SHIFT;
- }
- level = READ_BIT(COMP->CSR, COMP_CSR_COMPxOUT << regshift);
-
- if(level != 0U)
- {
- return(COMP_OUTPUTLEVEL_HIGH);
- }
- return(COMP_OUTPUTLEVEL_LOW);
-}
-
-/**
- * @brief Comparator trigger callback.
- * @param hcomp COMP handle
- * @retval None
- */
-__weak void HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(hcomp);
-
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_COMP_TriggerCallback should be implemented in the user file
- */
-}
-
-
-/**
- * @}
- */
-
-/** @defgroup COMP_Exported_Functions_Group4 Peripheral State functions
- * @brief Peripheral State functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral State functions #####
- ===============================================================================
- [..]
- This subsection permit to get in run-time the status of the peripheral
- and the data flow.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Return the COMP state
- * @param hcomp COMP handle
- * @retval HAL state
- */
-uint32_t HAL_COMP_GetState(COMP_HandleTypeDef *hcomp)
-{
- /* Check the COMP handle allocation */
- if(hcomp == NULL)
- {
- return HAL_COMP_STATE_RESET;
- }
-
- /* Check the parameter */
- assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance));
-
- return hcomp->State;
-}
-
-/**
- * @brief Return the COMP error code.
- * @param hcomp COMP handle
- * @retval COMP error code
- */
-uint32_t HAL_COMP_GetError(COMP_HandleTypeDef *hcomp)
-{
- /* Check the parameters */
- assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance));
-
- return hcomp->ErrorCode;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* COMP1 || COMP2 */
-
-#endif /* HAL_COMP_MODULE_ENABLED */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|