diff options
Diffstat (limited to 'hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_wwdg.h')
-rw-r--r-- | hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_wwdg.h | 319 |
1 files changed, 0 insertions, 319 deletions
diff --git a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_wwdg.h b/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_wwdg.h deleted file mode 100644 index d835f04..0000000 --- a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_wwdg.h +++ /dev/null @@ -1,319 +0,0 @@ -/**
- ******************************************************************************
- * @file stm32f0xx_ll_wwdg.h
- * @author MCD Application Team
- * @brief Header file of WWDG LL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef STM32F0xx_LL_WWDG_H
-#define STM32F0xx_LL_WWDG_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx.h"
-
-/** @addtogroup STM32F0xx_LL_Driver
- * @{
- */
-
-#if defined (WWDG)
-
-/** @defgroup WWDG_LL WWDG
- * @{
- */
-
-/* Private types -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private constants ---------------------------------------------------------*/
-/* Private macros ------------------------------------------------------------*/
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup WWDG_LL_Exported_Constants WWDG Exported Constants
- * @{
- */
-
-/** @defgroup WWDG_LL_EC_IT IT Defines
- * @brief IT defines which can be used with LL_WWDG_ReadReg and LL_WWDG_WriteReg functions
- * @{
- */
-#define LL_WWDG_CFR_EWI WWDG_CFR_EWI
-/**
- * @}
- */
-
-/** @defgroup WWDG_LL_EC_PRESCALER PRESCALER
- * @{
- */
-#define LL_WWDG_PRESCALER_1 0x00000000u /*!< WWDG counter clock = (PCLK1/4096)/1 */
-#define LL_WWDG_PRESCALER_2 WWDG_CFR_WDGTB_0 /*!< WWDG counter clock = (PCLK1/4096)/2 */
-#define LL_WWDG_PRESCALER_4 WWDG_CFR_WDGTB_1 /*!< WWDG counter clock = (PCLK1/4096)/4 */
-#define LL_WWDG_PRESCALER_8 (WWDG_CFR_WDGTB_0 | WWDG_CFR_WDGTB_1) /*!< WWDG counter clock = (PCLK1/4096)/8 */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported macro ------------------------------------------------------------*/
-/** @defgroup WWDG_LL_Exported_Macros WWDG Exported Macros
- * @{
- */
-/** @defgroup WWDG_LL_EM_WRITE_READ Common Write and read registers macros
- * @{
- */
-/**
- * @brief Write a value in WWDG register
- * @param __INSTANCE__ WWDG Instance
- * @param __REG__ Register to be written
- * @param __VALUE__ Value to be written in the register
- * @retval None
- */
-#define LL_WWDG_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
-
-/**
- * @brief Read a value in WWDG register
- * @param __INSTANCE__ WWDG Instance
- * @param __REG__ Register to be read
- * @retval Register value
- */
-#define LL_WWDG_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup WWDG_LL_Exported_Functions WWDG Exported Functions
- * @{
- */
-
-/** @defgroup WWDG_LL_EF_Configuration Configuration
- * @{
- */
-/**
- * @brief Enable Window Watchdog. The watchdog is always disabled after a reset.
- * @note It is enabled by setting the WDGA bit in the WWDG_CR register,
- * then it cannot be disabled again except by a reset.
- * This bit is set by software and only cleared by hardware after a reset.
- * When WDGA = 1, the watchdog can generate a reset.
- * @rmtoll CR WDGA LL_WWDG_Enable
- * @param WWDGx WWDG Instance
- * @retval None
- */
-__STATIC_INLINE void LL_WWDG_Enable(WWDG_TypeDef *WWDGx)
-{
- SET_BIT(WWDGx->CR, WWDG_CR_WDGA);
-}
-
-/**
- * @brief Checks if Window Watchdog is enabled
- * @rmtoll CR WDGA LL_WWDG_IsEnabled
- * @param WWDGx WWDG Instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_WWDG_IsEnabled(WWDG_TypeDef *WWDGx)
-{
- return ((READ_BIT(WWDGx->CR, WWDG_CR_WDGA) == (WWDG_CR_WDGA)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Set the Watchdog counter value to provided value (7-bits T[6:0])
- * @note When writing to the WWDG_CR register, always write 1 in the MSB b6 to avoid generating an immediate reset
- * This counter is decremented every (4096 x 2expWDGTB) PCLK cycles
- * A reset is produced when it rolls over from 0x40 to 0x3F (bit T6 becomes cleared)
- * Setting the counter lower then 0x40 causes an immediate reset (if WWDG enabled)
- * @rmtoll CR T LL_WWDG_SetCounter
- * @param WWDGx WWDG Instance
- * @param Counter 0..0x7F (7 bit counter value)
- * @retval None
- */
-__STATIC_INLINE void LL_WWDG_SetCounter(WWDG_TypeDef *WWDGx, uint32_t Counter)
-{
- MODIFY_REG(WWDGx->CR, WWDG_CR_T, Counter);
-}
-
-/**
- * @brief Return current Watchdog Counter Value (7 bits counter value)
- * @rmtoll CR T LL_WWDG_GetCounter
- * @param WWDGx WWDG Instance
- * @retval 7 bit Watchdog Counter value
- */
-__STATIC_INLINE uint32_t LL_WWDG_GetCounter(WWDG_TypeDef *WWDGx)
-{
- return (READ_BIT(WWDGx->CR, WWDG_CR_T));
-}
-
-/**
- * @brief Set the time base of the prescaler (WDGTB).
- * @note Prescaler is used to apply ratio on PCLK clock, so that Watchdog counter
- * is decremented every (4096 x 2expWDGTB) PCLK cycles
- * @rmtoll CFR WDGTB LL_WWDG_SetPrescaler
- * @param WWDGx WWDG Instance
- * @param Prescaler This parameter can be one of the following values:
- * @arg @ref LL_WWDG_PRESCALER_1
- * @arg @ref LL_WWDG_PRESCALER_2
- * @arg @ref LL_WWDG_PRESCALER_4
- * @arg @ref LL_WWDG_PRESCALER_8
- * @retval None
- */
-__STATIC_INLINE void LL_WWDG_SetPrescaler(WWDG_TypeDef *WWDGx, uint32_t Prescaler)
-{
- MODIFY_REG(WWDGx->CFR, WWDG_CFR_WDGTB, Prescaler);
-}
-
-/**
- * @brief Return current Watchdog Prescaler Value
- * @rmtoll CFR WDGTB LL_WWDG_GetPrescaler
- * @param WWDGx WWDG Instance
- * @retval Returned value can be one of the following values:
- * @arg @ref LL_WWDG_PRESCALER_1
- * @arg @ref LL_WWDG_PRESCALER_2
- * @arg @ref LL_WWDG_PRESCALER_4
- * @arg @ref LL_WWDG_PRESCALER_8
- */
-__STATIC_INLINE uint32_t LL_WWDG_GetPrescaler(WWDG_TypeDef *WWDGx)
-{
- return (READ_BIT(WWDGx->CFR, WWDG_CFR_WDGTB));
-}
-
-/**
- * @brief Set the Watchdog Window value to be compared to the downcounter (7-bits W[6:0]).
- * @note This window value defines when write in the WWDG_CR register
- * to program Watchdog counter is allowed.
- * Watchdog counter value update must occur only when the counter value
- * is lower than the Watchdog window register value.
- * Otherwise, a MCU reset is generated if the 7-bit Watchdog counter value
- * (in the control register) is refreshed before the downcounter has reached
- * the watchdog window register value.
- * Physically is possible to set the Window lower then 0x40 but it is not recommended.
- * To generate an immediate reset, it is possible to set the Counter lower than 0x40.
- * @rmtoll CFR W LL_WWDG_SetWindow
- * @param WWDGx WWDG Instance
- * @param Window 0x00..0x7F (7 bit Window value)
- * @retval None
- */
-__STATIC_INLINE void LL_WWDG_SetWindow(WWDG_TypeDef *WWDGx, uint32_t Window)
-{
- MODIFY_REG(WWDGx->CFR, WWDG_CFR_W, Window);
-}
-
-/**
- * @brief Return current Watchdog Window Value (7 bits value)
- * @rmtoll CFR W LL_WWDG_GetWindow
- * @param WWDGx WWDG Instance
- * @retval 7 bit Watchdog Window value
- */
-__STATIC_INLINE uint32_t LL_WWDG_GetWindow(WWDG_TypeDef *WWDGx)
-{
- return (READ_BIT(WWDGx->CFR, WWDG_CFR_W));
-}
-
-/**
- * @}
- */
-
-/** @defgroup WWDG_LL_EF_FLAG_Management FLAG_Management
- * @{
- */
-/**
- * @brief Indicates if the WWDG Early Wakeup Interrupt Flag is set or not.
- * @note This bit is set by hardware when the counter has reached the value 0x40.
- * It must be cleared by software by writing 0.
- * A write of 1 has no effect. This bit is also set if the interrupt is not enabled.
- * @rmtoll SR EWIF LL_WWDG_IsActiveFlag_EWKUP
- * @param WWDGx WWDG Instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_WWDG_IsActiveFlag_EWKUP(WWDG_TypeDef *WWDGx)
-{
- return ((READ_BIT(WWDGx->SR, WWDG_SR_EWIF) == (WWDG_SR_EWIF)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Clear WWDG Early Wakeup Interrupt Flag (EWIF)
- * @rmtoll SR EWIF LL_WWDG_ClearFlag_EWKUP
- * @param WWDGx WWDG Instance
- * @retval None
- */
-__STATIC_INLINE void LL_WWDG_ClearFlag_EWKUP(WWDG_TypeDef *WWDGx)
-{
- WRITE_REG(WWDGx->SR, ~WWDG_SR_EWIF);
-}
-
-/**
- * @}
- */
-
-/** @defgroup WWDG_LL_EF_IT_Management IT_Management
- * @{
- */
-/**
- * @brief Enable the Early Wakeup Interrupt.
- * @note When set, an interrupt occurs whenever the counter reaches value 0x40.
- * This interrupt is only cleared by hardware after a reset
- * @rmtoll CFR EWI LL_WWDG_EnableIT_EWKUP
- * @param WWDGx WWDG Instance
- * @retval None
- */
-__STATIC_INLINE void LL_WWDG_EnableIT_EWKUP(WWDG_TypeDef *WWDGx)
-{
- SET_BIT(WWDGx->CFR, WWDG_CFR_EWI);
-}
-
-/**
- * @brief Check if Early Wakeup Interrupt is enabled
- * @rmtoll CFR EWI LL_WWDG_IsEnabledIT_EWKUP
- * @param WWDGx WWDG Instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_WWDG_IsEnabledIT_EWKUP(WWDG_TypeDef *WWDGx)
-{
- return ((READ_BIT(WWDGx->CFR, WWDG_CFR_EWI) == (WWDG_CFR_EWI)) ? 1UL : 0UL);
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* WWDG */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* STM32F0xx_LL_WWDG_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|