diff options
Diffstat (limited to 'hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_dma.h')
| -rw-r--r-- | hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_dma.h | 2208 |
1 files changed, 0 insertions, 2208 deletions
diff --git a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_dma.h b/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_dma.h deleted file mode 100644 index c789835..0000000 --- a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_dma.h +++ /dev/null @@ -1,2208 +0,0 @@ -/**
- ******************************************************************************
- * @file stm32f0xx_ll_dma.h
- * @author MCD Application Team
- * @brief Header file of DMA LL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F0xx_LL_DMA_H
-#define __STM32F0xx_LL_DMA_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx.h"
-
-/** @addtogroup STM32F0xx_LL_Driver
- * @{
- */
-
-#if defined (DMA1) || defined (DMA2)
-
-/** @defgroup DMA_LL DMA
- * @{
- */
-
-/* Private types -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/** @defgroup DMA_LL_Private_Variables DMA Private Variables
- * @{
- */
-/* Array used to get the DMA channel register offset versus channel index LL_DMA_CHANNEL_x */
-static const uint8_t CHANNEL_OFFSET_TAB[] =
-{
- (uint8_t)(DMA1_Channel1_BASE - DMA1_BASE),
- (uint8_t)(DMA1_Channel2_BASE - DMA1_BASE),
- (uint8_t)(DMA1_Channel3_BASE - DMA1_BASE),
- (uint8_t)(DMA1_Channel4_BASE - DMA1_BASE),
- (uint8_t)(DMA1_Channel5_BASE - DMA1_BASE),
-#if defined(DMA1_Channel6)
- (uint8_t)(DMA1_Channel6_BASE - DMA1_BASE),
-#endif /*DMA1_Channel6*/
-#if defined(DMA1_Channel7)
- (uint8_t)(DMA1_Channel7_BASE - DMA1_BASE)
-#endif /*DMA1_Channel7*/
-};
-/**
- * @}
- */
-
-/* Private constants ---------------------------------------------------------*/
-/** @defgroup DMA_LL_Private_Constants DMA Private Constants
- * @{
- */
-/* Define used to get CSELR register offset */
-#define DMA_CSELR_OFFSET (uint32_t)(DMA1_CSELR_BASE - DMA1_BASE)
-
-/* Defines used for the bit position in the register and perform offsets */
-#define DMA_POSITION_CSELR_CXS ((Channel-1U)*4U)
-/**
- * @}
- */
-
-/* Private macros ------------------------------------------------------------*/
-#if defined(USE_FULL_LL_DRIVER)
-/** @defgroup DMA_LL_Private_Macros DMA Private Macros
- * @{
- */
-/**
- * @}
- */
-#endif /*USE_FULL_LL_DRIVER*/
-
-/* Exported types ------------------------------------------------------------*/
-#if defined(USE_FULL_LL_DRIVER)
-/** @defgroup DMA_LL_ES_INIT DMA Exported Init structure
- * @{
- */
-typedef struct
-{
- uint32_t PeriphOrM2MSrcAddress; /*!< Specifies the peripheral base address for DMA transfer
- or as Source base address in case of memory to memory transfer direction.
-
- This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */
-
- uint32_t MemoryOrM2MDstAddress; /*!< Specifies the memory base address for DMA transfer
- or as Destination base address in case of memory to memory transfer direction.
-
- This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */
-
- uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral,
- from memory to memory or from peripheral to memory.
- This parameter can be a value of @ref DMA_LL_EC_DIRECTION
-
- This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataTransferDirection(). */
-
- uint32_t Mode; /*!< Specifies the normal or circular operation mode.
- This parameter can be a value of @ref DMA_LL_EC_MODE
- @note: The circular buffer mode cannot be used if the memory to memory
- data transfer direction is configured on the selected Channel
-
- This feature can be modified afterwards using unitary function @ref LL_DMA_SetMode(). */
-
- uint32_t PeriphOrM2MSrcIncMode; /*!< Specifies whether the Peripheral address or Source address in case of memory to memory transfer direction
- is incremented or not.
- This parameter can be a value of @ref DMA_LL_EC_PERIPH
-
- This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphIncMode(). */
-
- uint32_t MemoryOrM2MDstIncMode; /*!< Specifies whether the Memory address or Destination address in case of memory to memory transfer direction
- is incremented or not.
- This parameter can be a value of @ref DMA_LL_EC_MEMORY
-
- This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemoryIncMode(). */
-
- uint32_t PeriphOrM2MSrcDataSize; /*!< Specifies the Peripheral data size alignment or Source data size alignment (byte, half word, word)
- in case of memory to memory transfer direction.
- This parameter can be a value of @ref DMA_LL_EC_PDATAALIGN
-
- This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphSize(). */
-
- uint32_t MemoryOrM2MDstDataSize; /*!< Specifies the Memory data size alignment or Destination data size alignment (byte, half word, word)
- in case of memory to memory transfer direction.
- This parameter can be a value of @ref DMA_LL_EC_MDATAALIGN
-
- This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemorySize(). */
-
- uint32_t NbData; /*!< Specifies the number of data to transfer, in data unit.
- The data unit is equal to the source buffer configuration set in PeripheralSize
- or MemorySize parameters depending in the transfer direction.
- This parameter must be a value between Min_Data = 0 and Max_Data = 0x0000FFFF
-
- This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataLength(). */
-#if (defined(DMA1_CSELR_DEFAULT)||defined(DMA2_CSELR_DEFAULT))
-
- uint32_t PeriphRequest; /*!< Specifies the peripheral request.
- This parameter can be a value of @ref DMA_LL_EC_REQUEST
-
- This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphRequest(). */
-#endif
-
- uint32_t Priority; /*!< Specifies the channel priority level.
- This parameter can be a value of @ref DMA_LL_EC_PRIORITY
-
- This feature can be modified afterwards using unitary function @ref LL_DMA_SetChannelPriorityLevel(). */
-
-} LL_DMA_InitTypeDef;
-/**
- * @}
- */
-#endif /*USE_FULL_LL_DRIVER*/
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup DMA_LL_Exported_Constants DMA Exported Constants
- * @{
- */
-/** @defgroup DMA_LL_EC_CLEAR_FLAG Clear Flags Defines
- * @brief Flags defines which can be used with LL_DMA_WriteReg function
- * @{
- */
-#define LL_DMA_IFCR_CGIF1 DMA_IFCR_CGIF1 /*!< Channel 1 global flag */
-#define LL_DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1 /*!< Channel 1 transfer complete flag */
-#define LL_DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1 /*!< Channel 1 half transfer flag */
-#define LL_DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1 /*!< Channel 1 transfer error flag */
-#define LL_DMA_IFCR_CGIF2 DMA_IFCR_CGIF2 /*!< Channel 2 global flag */
-#define LL_DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2 /*!< Channel 2 transfer complete flag */
-#define LL_DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2 /*!< Channel 2 half transfer flag */
-#define LL_DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2 /*!< Channel 2 transfer error flag */
-#define LL_DMA_IFCR_CGIF3 DMA_IFCR_CGIF3 /*!< Channel 3 global flag */
-#define LL_DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3 /*!< Channel 3 transfer complete flag */
-#define LL_DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3 /*!< Channel 3 half transfer flag */
-#define LL_DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3 /*!< Channel 3 transfer error flag */
-#define LL_DMA_IFCR_CGIF4 DMA_IFCR_CGIF4 /*!< Channel 4 global flag */
-#define LL_DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4 /*!< Channel 4 transfer complete flag */
-#define LL_DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4 /*!< Channel 4 half transfer flag */
-#define LL_DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4 /*!< Channel 4 transfer error flag */
-#define LL_DMA_IFCR_CGIF5 DMA_IFCR_CGIF5 /*!< Channel 5 global flag */
-#define LL_DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5 /*!< Channel 5 transfer complete flag */
-#define LL_DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5 /*!< Channel 5 half transfer flag */
-#define LL_DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5 /*!< Channel 5 transfer error flag */
-#if defined(DMA1_Channel6)
-#define LL_DMA_IFCR_CGIF6 DMA_IFCR_CGIF6 /*!< Channel 6 global flag */
-#define LL_DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6 /*!< Channel 6 transfer complete flag */
-#define LL_DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6 /*!< Channel 6 half transfer flag */
-#define LL_DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6 /*!< Channel 6 transfer error flag */
-#endif
-#if defined(DMA1_Channel7)
-#define LL_DMA_IFCR_CGIF7 DMA_IFCR_CGIF7 /*!< Channel 7 global flag */
-#define LL_DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7 /*!< Channel 7 transfer complete flag */
-#define LL_DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7 /*!< Channel 7 half transfer flag */
-#define LL_DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7 /*!< Channel 7 transfer error flag */
-#endif
-/**
- * @}
- */
-
-/** @defgroup DMA_LL_EC_GET_FLAG Get Flags Defines
- * @brief Flags defines which can be used with LL_DMA_ReadReg function
- * @{
- */
-#define LL_DMA_ISR_GIF1 DMA_ISR_GIF1 /*!< Channel 1 global flag */
-#define LL_DMA_ISR_TCIF1 DMA_ISR_TCIF1 /*!< Channel 1 transfer complete flag */
-#define LL_DMA_ISR_HTIF1 DMA_ISR_HTIF1 /*!< Channel 1 half transfer flag */
-#define LL_DMA_ISR_TEIF1 DMA_ISR_TEIF1 /*!< Channel 1 transfer error flag */
-#define LL_DMA_ISR_GIF2 DMA_ISR_GIF2 /*!< Channel 2 global flag */
-#define LL_DMA_ISR_TCIF2 DMA_ISR_TCIF2 /*!< Channel 2 transfer complete flag */
-#define LL_DMA_ISR_HTIF2 DMA_ISR_HTIF2 /*!< Channel 2 half transfer flag */
-#define LL_DMA_ISR_TEIF2 DMA_ISR_TEIF2 /*!< Channel 2 transfer error flag */
-#define LL_DMA_ISR_GIF3 DMA_ISR_GIF3 /*!< Channel 3 global flag */
-#define LL_DMA_ISR_TCIF3 DMA_ISR_TCIF3 /*!< Channel 3 transfer complete flag */
-#define LL_DMA_ISR_HTIF3 DMA_ISR_HTIF3 /*!< Channel 3 half transfer flag */
-#define LL_DMA_ISR_TEIF3 DMA_ISR_TEIF3 /*!< Channel 3 transfer error flag */
-#define LL_DMA_ISR_GIF4 DMA_ISR_GIF4 /*!< Channel 4 global flag */
-#define LL_DMA_ISR_TCIF4 DMA_ISR_TCIF4 /*!< Channel 4 transfer complete flag */
-#define LL_DMA_ISR_HTIF4 DMA_ISR_HTIF4 /*!< Channel 4 half transfer flag */
-#define LL_DMA_ISR_TEIF4 DMA_ISR_TEIF4 /*!< Channel 4 transfer error flag */
-#define LL_DMA_ISR_GIF5 DMA_ISR_GIF5 /*!< Channel 5 global flag */
-#define LL_DMA_ISR_TCIF5 DMA_ISR_TCIF5 /*!< Channel 5 transfer complete flag */
-#define LL_DMA_ISR_HTIF5 DMA_ISR_HTIF5 /*!< Channel 5 half transfer flag */
-#define LL_DMA_ISR_TEIF5 DMA_ISR_TEIF5 /*!< Channel 5 transfer error flag */
-#if defined(DMA1_Channel6)
-#define LL_DMA_ISR_GIF6 DMA_ISR_GIF6 /*!< Channel 6 global flag */
-#define LL_DMA_ISR_TCIF6 DMA_ISR_TCIF6 /*!< Channel 6 transfer complete flag */
-#define LL_DMA_ISR_HTIF6 DMA_ISR_HTIF6 /*!< Channel 6 half transfer flag */
-#define LL_DMA_ISR_TEIF6 DMA_ISR_TEIF6 /*!< Channel 6 transfer error flag */
-#endif
-#if defined(DMA1_Channel7)
-#define LL_DMA_ISR_GIF7 DMA_ISR_GIF7 /*!< Channel 7 global flag */
-#define LL_DMA_ISR_TCIF7 DMA_ISR_TCIF7 /*!< Channel 7 transfer complete flag */
-#define LL_DMA_ISR_HTIF7 DMA_ISR_HTIF7 /*!< Channel 7 half transfer flag */
-#define LL_DMA_ISR_TEIF7 DMA_ISR_TEIF7 /*!< Channel 7 transfer error flag */
-#endif
-/**
- * @}
- */
-
-/** @defgroup DMA_LL_EC_IT IT Defines
- * @brief IT defines which can be used with LL_DMA_ReadReg and LL_DMA_WriteReg functions
- * @{
- */
-#define LL_DMA_CCR_TCIE DMA_CCR_TCIE /*!< Transfer complete interrupt */
-#define LL_DMA_CCR_HTIE DMA_CCR_HTIE /*!< Half Transfer interrupt */
-#define LL_DMA_CCR_TEIE DMA_CCR_TEIE /*!< Transfer error interrupt */
-/**
- * @}
- */
-
-/** @defgroup DMA_LL_EC_CHANNEL CHANNEL
- * @{
- */
-#define LL_DMA_CHANNEL_1 0x00000001U /*!< DMA Channel 1 */
-#define LL_DMA_CHANNEL_2 0x00000002U /*!< DMA Channel 2 */
-#define LL_DMA_CHANNEL_3 0x00000003U /*!< DMA Channel 3 */
-#define LL_DMA_CHANNEL_4 0x00000004U /*!< DMA Channel 4 */
-#define LL_DMA_CHANNEL_5 0x00000005U /*!< DMA Channel 5 */
-#if defined(DMA1_Channel6)
-#define LL_DMA_CHANNEL_6 0x00000006U /*!< DMA Channel 6 */
-#endif
-#if defined(DMA1_Channel7)
-#define LL_DMA_CHANNEL_7 0x00000007U /*!< DMA Channel 7 */
-#endif
-#if defined(USE_FULL_LL_DRIVER)
-#define LL_DMA_CHANNEL_ALL 0xFFFF0000U /*!< DMA Channel all (used only for function @ref LL_DMA_DeInit(). */
-#endif /*USE_FULL_LL_DRIVER*/
-/**
- * @}
- */
-
-/** @defgroup DMA_LL_EC_DIRECTION Transfer Direction
- * @{
- */
-#define LL_DMA_DIRECTION_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */
-#define LL_DMA_DIRECTION_MEMORY_TO_PERIPH DMA_CCR_DIR /*!< Memory to peripheral direction */
-#define LL_DMA_DIRECTION_MEMORY_TO_MEMORY DMA_CCR_MEM2MEM /*!< Memory to memory direction */
-/**
- * @}
- */
-
-/** @defgroup DMA_LL_EC_MODE Transfer mode
- * @{
- */
-#define LL_DMA_MODE_NORMAL 0x00000000U /*!< Normal Mode */
-#define LL_DMA_MODE_CIRCULAR DMA_CCR_CIRC /*!< Circular Mode */
-/**
- * @}
- */
-
-/** @defgroup DMA_LL_EC_PERIPH Peripheral increment mode
- * @{
- */
-#define LL_DMA_PERIPH_INCREMENT DMA_CCR_PINC /*!< Peripheral increment mode Enable */
-#define LL_DMA_PERIPH_NOINCREMENT 0x00000000U /*!< Peripheral increment mode Disable */
-/**
- * @}
- */
-
-/** @defgroup DMA_LL_EC_MEMORY Memory increment mode
- * @{
- */
-#define LL_DMA_MEMORY_INCREMENT DMA_CCR_MINC /*!< Memory increment mode Enable */
-#define LL_DMA_MEMORY_NOINCREMENT 0x00000000U /*!< Memory increment mode Disable */
-/**
- * @}
- */
-
-/** @defgroup DMA_LL_EC_PDATAALIGN Peripheral data alignment
- * @{
- */
-#define LL_DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment : Byte */
-#define LL_DMA_PDATAALIGN_HALFWORD DMA_CCR_PSIZE_0 /*!< Peripheral data alignment : HalfWord */
-#define LL_DMA_PDATAALIGN_WORD DMA_CCR_PSIZE_1 /*!< Peripheral data alignment : Word */
-/**
- * @}
- */
-
-/** @defgroup DMA_LL_EC_MDATAALIGN Memory data alignment
- * @{
- */
-#define LL_DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment : Byte */
-#define LL_DMA_MDATAALIGN_HALFWORD DMA_CCR_MSIZE_0 /*!< Memory data alignment : HalfWord */
-#define LL_DMA_MDATAALIGN_WORD DMA_CCR_MSIZE_1 /*!< Memory data alignment : Word */
-/**
- * @}
- */
-
-/** @defgroup DMA_LL_EC_PRIORITY Transfer Priority level
- * @{
- */
-#define LL_DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */
-#define LL_DMA_PRIORITY_MEDIUM DMA_CCR_PL_0 /*!< Priority level : Medium */
-#define LL_DMA_PRIORITY_HIGH DMA_CCR_PL_1 /*!< Priority level : High */
-#define LL_DMA_PRIORITY_VERYHIGH DMA_CCR_PL /*!< Priority level : Very_High */
-/**
- * @}
- */
-
-#if (defined(DMA1_CSELR_DEFAULT)||defined(DMA2_CSELR_DEFAULT))
-/** @defgroup DMA_LL_EC_REQUEST Transfer peripheral request
- * @{
- */
-#define LL_DMA_REQUEST_0 0x00000000U /*!< DMA peripheral request 0 */
-#define LL_DMA_REQUEST_1 0x00000001U /*!< DMA peripheral request 1 */
-#define LL_DMA_REQUEST_2 0x00000002U /*!< DMA peripheral request 2 */
-#define LL_DMA_REQUEST_3 0x00000003U /*!< DMA peripheral request 3 */
-#define LL_DMA_REQUEST_4 0x00000004U /*!< DMA peripheral request 4 */
-#define LL_DMA_REQUEST_5 0x00000005U /*!< DMA peripheral request 5 */
-#define LL_DMA_REQUEST_6 0x00000006U /*!< DMA peripheral request 6 */
-#define LL_DMA_REQUEST_7 0x00000007U /*!< DMA peripheral request 7 */
-#define LL_DMA_REQUEST_8 0x00000008U /*!< DMA peripheral request 8 */
-#define LL_DMA_REQUEST_9 0x00000009U /*!< DMA peripheral request 9 */
-#define LL_DMA_REQUEST_10 0x0000000AU /*!< DMA peripheral request 10 */
-#define LL_DMA_REQUEST_11 0x0000000BU /*!< DMA peripheral request 11 */
-#define LL_DMA_REQUEST_12 0x0000000CU /*!< DMA peripheral request 12 */
-#define LL_DMA_REQUEST_13 0x0000000DU /*!< DMA peripheral request 13 */
-#define LL_DMA_REQUEST_14 0x0000000EU /*!< DMA peripheral request 14 */
-#define LL_DMA_REQUEST_15 0x0000000FU /*!< DMA peripheral request 15 */
-/**
- * @}
- */
-#endif
-
-/**
- * @}
- */
-
-/* Exported macro ------------------------------------------------------------*/
-/** @defgroup DMA_LL_Exported_Macros DMA Exported Macros
- * @{
- */
-
-/** @defgroup DMA_LL_EM_WRITE_READ Common Write and read registers macros
- * @{
- */
-/**
- * @brief Write a value in DMA register
- * @param __INSTANCE__ DMA Instance
- * @param __REG__ Register to be written
- * @param __VALUE__ Value to be written in the register
- * @retval None
- */
-#define LL_DMA_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
-
-/**
- * @brief Read a value in DMA register
- * @param __INSTANCE__ DMA Instance
- * @param __REG__ Register to be read
- * @retval Register value
- */
-#define LL_DMA_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
-/**
- * @}
- */
-
-/** @defgroup DMA_LL_EM_CONVERT_DMAxCHANNELy Convert DMAxChannely
- * @{
- */
-/**
- * @brief Convert DMAx_Channely into DMAx
- * @param __CHANNEL_INSTANCE__ DMAx_Channely
- * @retval DMAx
- */
-#if defined(DMA2)
-#define __LL_DMA_GET_INSTANCE(__CHANNEL_INSTANCE__) \
-(((uint32_t)(__CHANNEL_INSTANCE__) > ((uint32_t)DMA1_Channel7)) ? DMA2 : DMA1)
-#else
-#define __LL_DMA_GET_INSTANCE(__CHANNEL_INSTANCE__) (DMA1)
-#endif
-
-/**
- * @brief Convert DMAx_Channely into LL_DMA_CHANNEL_y
- * @param __CHANNEL_INSTANCE__ DMAx_Channely
- * @retval LL_DMA_CHANNEL_y
- */
-#if defined (DMA2)
-#if defined (DMA2_Channel6) && defined (DMA2_Channel7)
-#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \
-(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel1)) ? LL_DMA_CHANNEL_1 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel2)) ? LL_DMA_CHANNEL_2 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel3)) ? LL_DMA_CHANNEL_3 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel4)) ? LL_DMA_CHANNEL_4 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel5)) ? LL_DMA_CHANNEL_5 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel6)) ? LL_DMA_CHANNEL_6 : \
- LL_DMA_CHANNEL_7)
-#else
-#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \
-(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel1)) ? LL_DMA_CHANNEL_1 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel2)) ? LL_DMA_CHANNEL_2 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel3)) ? LL_DMA_CHANNEL_3 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel4)) ? LL_DMA_CHANNEL_4 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel5)) ? LL_DMA_CHANNEL_5 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \
- LL_DMA_CHANNEL_7)
-#endif
-#else
-#if defined (DMA1_Channel6) && defined (DMA1_Channel7)
-#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \
-(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \
- LL_DMA_CHANNEL_7)
-#elif defined (DMA1_Channel6)
-#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \
-(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \
- LL_DMA_CHANNEL_6)
-#else
-#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \
-(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \
- ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \
- LL_DMA_CHANNEL_5)
-#endif /* DMA1_Channel6 && DMA1_Channel7 */
-#endif
-
-/**
- * @brief Convert DMA Instance DMAx and LL_DMA_CHANNEL_y into DMAx_Channely
- * @param __DMA_INSTANCE__ DMAx
- * @param __CHANNEL__ LL_DMA_CHANNEL_y
- * @retval DMAx_Channely
- */
-#if defined (DMA2)
-#if defined (DMA2_Channel6) && defined (DMA2_Channel7)
-#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \
-((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA2_Channel1 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA2_Channel2 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA2_Channel3 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA2_Channel4 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA2_Channel5 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA2_Channel6 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_7))) ? DMA1_Channel7 : \
- DMA2_Channel7)
-#else
-#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \
-((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA2_Channel1 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA2_Channel2 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA2_Channel3 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA2_Channel4 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA2_Channel5 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \
- DMA1_Channel7)
-#endif
-#else
-#if defined (DMA1_Channel6) && defined (DMA1_Channel7)
-#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \
-((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \
- DMA1_Channel7)
-#elif defined (DMA1_Channel6)
-#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \
-((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \
- DMA1_Channel6)
-#else
-#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \
-((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \
- (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \
- DMA1_Channel5)
-#endif /* DMA1_Channel6 && DMA1_Channel7 */
-#endif
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup DMA_LL_Exported_Functions DMA Exported Functions
- * @{
- */
-
-/** @defgroup DMA_LL_EF_Configuration Configuration
- * @{
- */
-/**
- * @brief Enable DMA channel.
- * @rmtoll CCR EN LL_DMA_EnableChannel
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_EnableChannel(DMA_TypeDef *DMAx, uint32_t Channel)
-{
- SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_EN);
-}
-
-/**
- * @brief Disable DMA channel.
- * @rmtoll CCR EN LL_DMA_DisableChannel
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_DisableChannel(DMA_TypeDef *DMAx, uint32_t Channel)
-{
- CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_EN);
-}
-
-/**
- * @brief Check if DMA channel is enabled or disabled.
- * @rmtoll CCR EN LL_DMA_IsEnabledChannel
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsEnabledChannel(DMA_TypeDef *DMAx, uint32_t Channel)
-{
- return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
- DMA_CCR_EN) == (DMA_CCR_EN));
-}
-
-/**
- * @brief Configure all parameters link to DMA transfer.
- * @rmtoll CCR DIR LL_DMA_ConfigTransfer\n
- * CCR MEM2MEM LL_DMA_ConfigTransfer\n
- * CCR CIRC LL_DMA_ConfigTransfer\n
- * CCR PINC LL_DMA_ConfigTransfer\n
- * CCR MINC LL_DMA_ConfigTransfer\n
- * CCR PSIZE LL_DMA_ConfigTransfer\n
- * CCR MSIZE LL_DMA_ConfigTransfer\n
- * CCR PL LL_DMA_ConfigTransfer
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @param Configuration This parameter must be a combination of all the following values:
- * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY or @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH or @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY
- * @arg @ref LL_DMA_MODE_NORMAL or @ref LL_DMA_MODE_CIRCULAR
- * @arg @ref LL_DMA_PERIPH_INCREMENT or @ref LL_DMA_PERIPH_NOINCREMENT
- * @arg @ref LL_DMA_MEMORY_INCREMENT or @ref LL_DMA_MEMORY_NOINCREMENT
- * @arg @ref LL_DMA_PDATAALIGN_BYTE or @ref LL_DMA_PDATAALIGN_HALFWORD or @ref LL_DMA_PDATAALIGN_WORD
- * @arg @ref LL_DMA_MDATAALIGN_BYTE or @ref LL_DMA_MDATAALIGN_HALFWORD or @ref LL_DMA_MDATAALIGN_WORD
- * @arg @ref LL_DMA_PRIORITY_LOW or @ref LL_DMA_PRIORITY_MEDIUM or @ref LL_DMA_PRIORITY_HIGH or @ref LL_DMA_PRIORITY_VERYHIGH
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_ConfigTransfer(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Configuration)
-{
- MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
- DMA_CCR_DIR | DMA_CCR_MEM2MEM | DMA_CCR_CIRC | DMA_CCR_PINC | DMA_CCR_MINC | DMA_CCR_PSIZE | DMA_CCR_MSIZE | DMA_CCR_PL,
- Configuration);
-}
-
-/**
- * @brief Set Data transfer direction (read from peripheral or from memory).
- * @rmtoll CCR DIR LL_DMA_SetDataTransferDirection\n
- * CCR MEM2MEM LL_DMA_SetDataTransferDirection
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @param Direction This parameter can be one of the following values:
- * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY
- * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH
- * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_SetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Direction)
-{
- MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
- DMA_CCR_DIR | DMA_CCR_MEM2MEM, Direction);
-}
-
-/**
- * @brief Get Data transfer direction (read from peripheral or from memory).
- * @rmtoll CCR DIR LL_DMA_GetDataTransferDirection\n
- * CCR MEM2MEM LL_DMA_GetDataTransferDirection
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @retval Returned value can be one of the following values:
- * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY
- * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH
- * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY
- */
-__STATIC_INLINE uint32_t LL_DMA_GetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel)
-{
- return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
- DMA_CCR_DIR | DMA_CCR_MEM2MEM));
-}
-
-/**
- * @brief Set DMA mode circular or normal.
- * @note The circular buffer mode cannot be used if the memory-to-memory
- * data transfer is configured on the selected Channel.
- * @rmtoll CCR CIRC LL_DMA_SetMode
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @param Mode This parameter can be one of the following values:
- * @arg @ref LL_DMA_MODE_NORMAL
- * @arg @ref LL_DMA_MODE_CIRCULAR
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_SetMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Mode)
-{
- MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_CIRC,
- Mode);
-}
-
-/**
- * @brief Get DMA mode circular or normal.
- * @rmtoll CCR CIRC LL_DMA_GetMode
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @retval Returned value can be one of the following values:
- * @arg @ref LL_DMA_MODE_NORMAL
- * @arg @ref LL_DMA_MODE_CIRCULAR
- */
-__STATIC_INLINE uint32_t LL_DMA_GetMode(DMA_TypeDef *DMAx, uint32_t Channel)
-{
- return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
- DMA_CCR_CIRC));
-}
-
-/**
- * @brief Set Peripheral increment mode.
- * @rmtoll CCR PINC LL_DMA_SetPeriphIncMode
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @param PeriphOrM2MSrcIncMode This parameter can be one of the following values:
- * @arg @ref LL_DMA_PERIPH_INCREMENT
- * @arg @ref LL_DMA_PERIPH_NOINCREMENT
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_SetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcIncMode)
-{
- MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_PINC,
- PeriphOrM2MSrcIncMode);
-}
-
-/**
- * @brief Get Peripheral increment mode.
- * @rmtoll CCR PINC LL_DMA_GetPeriphIncMode
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @retval Returned value can be one of the following values:
- * @arg @ref LL_DMA_PERIPH_INCREMENT
- * @arg @ref LL_DMA_PERIPH_NOINCREMENT
- */
-__STATIC_INLINE uint32_t LL_DMA_GetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel)
-{
- return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
- DMA_CCR_PINC));
-}
-
-/**
- * @brief Set Memory increment mode.
- * @rmtoll CCR MINC LL_DMA_SetMemoryIncMode
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @param MemoryOrM2MDstIncMode This parameter can be one of the following values:
- * @arg @ref LL_DMA_MEMORY_INCREMENT
- * @arg @ref LL_DMA_MEMORY_NOINCREMENT
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_SetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstIncMode)
-{
- MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_MINC,
- MemoryOrM2MDstIncMode);
-}
-
-/**
- * @brief Get Memory increment mode.
- * @rmtoll CCR MINC LL_DMA_GetMemoryIncMode
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @retval Returned value can be one of the following values:
- * @arg @ref LL_DMA_MEMORY_INCREMENT
- * @arg @ref LL_DMA_MEMORY_NOINCREMENT
- */
-__STATIC_INLINE uint32_t LL_DMA_GetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel)
-{
- return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
- DMA_CCR_MINC));
-}
-
-/**
- * @brief Set Peripheral size.
- * @rmtoll CCR PSIZE LL_DMA_SetPeriphSize
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @param PeriphOrM2MSrcDataSize This parameter can be one of the following values:
- * @arg @ref LL_DMA_PDATAALIGN_BYTE
- * @arg @ref LL_DMA_PDATAALIGN_HALFWORD
- * @arg @ref LL_DMA_PDATAALIGN_WORD
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_SetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcDataSize)
-{
- MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_PSIZE,
- PeriphOrM2MSrcDataSize);
-}
-
-/**
- * @brief Get Peripheral size.
- * @rmtoll CCR PSIZE LL_DMA_GetPeriphSize
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @retval Returned value can be one of the following values:
- * @arg @ref LL_DMA_PDATAALIGN_BYTE
- * @arg @ref LL_DMA_PDATAALIGN_HALFWORD
- * @arg @ref LL_DMA_PDATAALIGN_WORD
- */
-__STATIC_INLINE uint32_t LL_DMA_GetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel)
-{
- return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
- DMA_CCR_PSIZE));
-}
-
-/**
- * @brief Set Memory size.
- * @rmtoll CCR MSIZE LL_DMA_SetMemorySize
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @param MemoryOrM2MDstDataSize This parameter can be one of the following values:
- * @arg @ref LL_DMA_MDATAALIGN_BYTE
- * @arg @ref LL_DMA_MDATAALIGN_HALFWORD
- * @arg @ref LL_DMA_MDATAALIGN_WORD
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_SetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstDataSize)
-{
- MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_MSIZE,
- MemoryOrM2MDstDataSize);
-}
-
-/**
- * @brief Get Memory size.
- * @rmtoll CCR MSIZE LL_DMA_GetMemorySize
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @retval Returned value can be one of the following values:
- * @arg @ref LL_DMA_MDATAALIGN_BYTE
- * @arg @ref LL_DMA_MDATAALIGN_HALFWORD
- * @arg @ref LL_DMA_MDATAALIGN_WORD
- */
-__STATIC_INLINE uint32_t LL_DMA_GetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel)
-{
- return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
- DMA_CCR_MSIZE));
-}
-
-/**
- * @brief Set Channel priority level.
- * @rmtoll CCR PL LL_DMA_SetChannelPriorityLevel
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @param Priority This parameter can be one of the following values:
- * @arg @ref LL_DMA_PRIORITY_LOW
- * @arg @ref LL_DMA_PRIORITY_MEDIUM
- * @arg @ref LL_DMA_PRIORITY_HIGH
- * @arg @ref LL_DMA_PRIORITY_VERYHIGH
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_SetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Priority)
-{
- MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_PL,
- Priority);
-}
-
-/**
- * @brief Get Channel priority level.
- * @rmtoll CCR PL LL_DMA_GetChannelPriorityLevel
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @retval Returned value can be one of the following values:
- * @arg @ref LL_DMA_PRIORITY_LOW
- * @arg @ref LL_DMA_PRIORITY_MEDIUM
- * @arg @ref LL_DMA_PRIORITY_HIGH
- * @arg @ref LL_DMA_PRIORITY_VERYHIGH
- */
-__STATIC_INLINE uint32_t LL_DMA_GetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel)
-{
- return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
- DMA_CCR_PL));
-}
-
-/**
- * @brief Set Number of data to transfer.
- * @note This action has no effect if
- * channel is enabled.
- * @rmtoll CNDTR NDT LL_DMA_SetDataLength
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @param NbData Between Min_Data = 0 and Max_Data = 0x0000FFFF
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_SetDataLength(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t NbData)
-{
- MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CNDTR,
- DMA_CNDTR_NDT, NbData);
-}
-
-/**
- * @brief Get Number of data to transfer.
- * @note Once the channel is enabled, the return value indicate the
- * remaining bytes to be transmitted.
- * @rmtoll CNDTR NDT LL_DMA_GetDataLength
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
- */
-__STATIC_INLINE uint32_t LL_DMA_GetDataLength(DMA_TypeDef *DMAx, uint32_t Channel)
-{
- return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CNDTR,
- DMA_CNDTR_NDT));
-}
-
-/**
- * @brief Configure the Source and Destination addresses.
- * @note This API must not be called when the DMA channel is enabled.
- * @note Each IP using DMA provides an API to get directly the register adress (LL_PPP_DMA_GetRegAddr).
- * @rmtoll CPAR PA LL_DMA_ConfigAddresses\n
- * CMAR MA LL_DMA_ConfigAddresses
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @param SrcAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
- * @param DstAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
- * @param Direction This parameter can be one of the following values:
- * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY
- * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH
- * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_ConfigAddresses(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t SrcAddress,
- uint32_t DstAddress, uint32_t Direction)
-{
- /* Direction Memory to Periph */
- if (Direction == LL_DMA_DIRECTION_MEMORY_TO_PERIPH)
- {
- WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR, SrcAddress);
- WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR, DstAddress);
- }
- /* Direction Periph to Memory and Memory to Memory */
- else
- {
- WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR, SrcAddress);
- WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR, DstAddress);
- }
-}
-
-/**
- * @brief Set the Memory address.
- * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only.
- * @note This API must not be called when the DMA channel is enabled.
- * @rmtoll CMAR MA LL_DMA_SetMemoryAddress
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_SetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress)
-{
- WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR, MemoryAddress);
-}
-
-/**
- * @brief Set the Peripheral address.
- * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only.
- * @note This API must not be called when the DMA channel is enabled.
- * @rmtoll CPAR PA LL_DMA_SetPeriphAddress
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @param PeriphAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_SetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphAddress)
-{
- WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR, PeriphAddress);
-}
-
-/**
- * @brief Get Memory address.
- * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only.
- * @rmtoll CMAR MA LL_DMA_GetMemoryAddress
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
- */
-__STATIC_INLINE uint32_t LL_DMA_GetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Channel)
-{
- return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR));
-}
-
-/**
- * @brief Get Peripheral address.
- * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only.
- * @rmtoll CPAR PA LL_DMA_GetPeriphAddress
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
- */
-__STATIC_INLINE uint32_t LL_DMA_GetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Channel)
-{
- return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR));
-}
-
-/**
- * @brief Set the Memory to Memory Source address.
- * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only.
- * @note This API must not be called when the DMA channel is enabled.
- * @rmtoll CPAR PA LL_DMA_SetM2MSrcAddress
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_SetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress)
-{
- WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR, MemoryAddress);
-}
-
-/**
- * @brief Set the Memory to Memory Destination address.
- * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only.
- * @note This API must not be called when the DMA channel is enabled.
- * @rmtoll CMAR MA LL_DMA_SetM2MDstAddress
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_SetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress)
-{
- WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR, MemoryAddress);
-}
-
-/**
- * @brief Get the Memory to Memory Source address.
- * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only.
- * @rmtoll CPAR PA LL_DMA_GetM2MSrcAddress
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
- */
-__STATIC_INLINE uint32_t LL_DMA_GetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Channel)
-{
- return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR));
-}
-
-/**
- * @brief Get the Memory to Memory Destination address.
- * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only.
- * @rmtoll CMAR MA LL_DMA_GetM2MDstAddress
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
- */
-__STATIC_INLINE uint32_t LL_DMA_GetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Channel)
-{
- return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR));
-}
-
-#if (defined(DMA1_CSELR_DEFAULT)||defined(DMA2_CSELR_DEFAULT))
-/**
- * @brief Set DMA request for DMA instance on Channel x.
- * @note Please refer to Reference Manual to get the available mapping of Request value link to Channel Selection.
- * @rmtoll CSELR C1S LL_DMA_SetPeriphRequest\n
- * CSELR C2S LL_DMA_SetPeriphRequest\n
- * CSELR C3S LL_DMA_SetPeriphRequest\n
- * CSELR C4S LL_DMA_SetPeriphRequest\n
- * CSELR C5S LL_DMA_SetPeriphRequest\n
- * CSELR C6S LL_DMA_SetPeriphRequest\n
- * CSELR C7S LL_DMA_SetPeriphRequest
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @param PeriphRequest This parameter can be one of the following values:
- * @arg @ref LL_DMA_REQUEST_0
- * @arg @ref LL_DMA_REQUEST_1
- * @arg @ref LL_DMA_REQUEST_2
- * @arg @ref LL_DMA_REQUEST_3
- * @arg @ref LL_DMA_REQUEST_4
- * @arg @ref LL_DMA_REQUEST_5
- * @arg @ref LL_DMA_REQUEST_6
- * @arg @ref LL_DMA_REQUEST_7
- * @arg @ref LL_DMA_REQUEST_8
- * @arg @ref LL_DMA_REQUEST_9
- * @arg @ref LL_DMA_REQUEST_10
- * @arg @ref LL_DMA_REQUEST_11
- * @arg @ref LL_DMA_REQUEST_12
- * @arg @ref LL_DMA_REQUEST_13
- * @arg @ref LL_DMA_REQUEST_14
- * @arg @ref LL_DMA_REQUEST_15
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_SetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphRequest)
-{
- MODIFY_REG(DMAx->CSELR,
- DMA_CSELR_C1S << ((Channel - 1U) * 4U), PeriphRequest << DMA_POSITION_CSELR_CXS);
-}
-
-/**
- * @brief Get DMA request for DMA instance on Channel x.
- * @rmtoll CSELR C1S LL_DMA_GetPeriphRequest\n
- * CSELR C2S LL_DMA_GetPeriphRequest\n
- * CSELR C3S LL_DMA_GetPeriphRequest\n
- * CSELR C4S LL_DMA_GetPeriphRequest\n
- * CSELR C5S LL_DMA_GetPeriphRequest\n
- * CSELR C6S LL_DMA_GetPeriphRequest\n
- * CSELR C7S LL_DMA_GetPeriphRequest
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @retval Returned value can be one of the following values:
- * @arg @ref LL_DMA_REQUEST_0
- * @arg @ref LL_DMA_REQUEST_1
- * @arg @ref LL_DMA_REQUEST_2
- * @arg @ref LL_DMA_REQUEST_3
- * @arg @ref LL_DMA_REQUEST_4
- * @arg @ref LL_DMA_REQUEST_5
- * @arg @ref LL_DMA_REQUEST_6
- * @arg @ref LL_DMA_REQUEST_7
- * @arg @ref LL_DMA_REQUEST_8
- * @arg @ref LL_DMA_REQUEST_9
- * @arg @ref LL_DMA_REQUEST_10
- * @arg @ref LL_DMA_REQUEST_11
- * @arg @ref LL_DMA_REQUEST_12
- * @arg @ref LL_DMA_REQUEST_13
- * @arg @ref LL_DMA_REQUEST_14
- * @arg @ref LL_DMA_REQUEST_15
- */
-__STATIC_INLINE uint32_t LL_DMA_GetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Channel)
-{
- return (READ_BIT(DMAx->CSELR,
- DMA_CSELR_C1S << ((Channel - 1U) * 4U)) >> DMA_POSITION_CSELR_CXS);
-}
-#endif
-
-/**
- * @}
- */
-
-/** @defgroup DMA_LL_EF_FLAG_Management FLAG_Management
- * @{
- */
-
-/**
- * @brief Get Channel 1 global interrupt flag.
- * @rmtoll ISR GIF1 LL_DMA_IsActiveFlag_GI1
- * @param DMAx DMAx Instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI1(DMA_TypeDef *DMAx)
-{
- return (READ_BIT(DMAx->ISR, DMA_ISR_GIF1) == (DMA_ISR_GIF1));
-}
-
-/**
- * @brief Get Channel 2 global interrupt flag.
- * @rmtoll ISR GIF2 LL_DMA_IsActiveFlag_GI2
- * @param DMAx DMAx Instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI2(DMA_TypeDef *DMAx)
-{
- return (READ_BIT(DMAx->ISR, DMA_ISR_GIF2) == (DMA_ISR_GIF2));
-}
-
-/**
- * @brief Get Channel 3 global interrupt flag.
- * @rmtoll ISR GIF3 LL_DMA_IsActiveFlag_GI3
- * @param DMAx DMAx Instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI3(DMA_TypeDef *DMAx)
-{
- return (READ_BIT(DMAx->ISR, DMA_ISR_GIF3) == (DMA_ISR_GIF3));
-}
-
-/**
- * @brief Get Channel 4 global interrupt flag.
- * @rmtoll ISR GIF4 LL_DMA_IsActiveFlag_GI4
- * @param DMAx DMAx Instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI4(DMA_TypeDef *DMAx)
-{
- return (READ_BIT(DMAx->ISR, DMA_ISR_GIF4) == (DMA_ISR_GIF4));
-}
-
-/**
- * @brief Get Channel 5 global interrupt flag.
- * @rmtoll ISR GIF5 LL_DMA_IsActiveFlag_GI5
- * @param DMAx DMAx Instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI5(DMA_TypeDef *DMAx)
-{
- return (READ_BIT(DMAx->ISR, DMA_ISR_GIF5) == (DMA_ISR_GIF5));
-}
-
-#if defined(DMA1_Channel6)
-/**
- * @brief Get Channel 6 global interrupt flag.
- * @rmtoll ISR GIF6 LL_DMA_IsActiveFlag_GI6
- * @param DMAx DMAx Instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI6(DMA_TypeDef *DMAx)
-{
- return (READ_BIT(DMAx->ISR, DMA_ISR_GIF6) == (DMA_ISR_GIF6));
-}
-#endif
-
-#if defined(DMA1_Channel7)
-/**
- * @brief Get Channel 7 global interrupt flag.
- * @rmtoll ISR GIF7 LL_DMA_IsActiveFlag_GI7
- * @param DMAx DMAx Instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI7(DMA_TypeDef *DMAx)
-{
- return (READ_BIT(DMAx->ISR, DMA_ISR_GIF7) == (DMA_ISR_GIF7));
-}
-#endif
-
-/**
- * @brief Get Channel 1 transfer complete flag.
- * @rmtoll ISR TCIF1 LL_DMA_IsActiveFlag_TC1
- * @param DMAx DMAx Instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC1(DMA_TypeDef *DMAx)
-{
- return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF1) == (DMA_ISR_TCIF1));
-}
-
-/**
- * @brief Get Channel 2 transfer complete flag.
- * @rmtoll ISR TCIF2 LL_DMA_IsActiveFlag_TC2
- * @param DMAx DMAx Instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC2(DMA_TypeDef *DMAx)
-{
- return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF2) == (DMA_ISR_TCIF2));
-}
-
-/**
- * @brief Get Channel 3 transfer complete flag.
- * @rmtoll ISR TCIF3 LL_DMA_IsActiveFlag_TC3
- * @param DMAx DMAx Instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC3(DMA_TypeDef *DMAx)
-{
- return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF3) == (DMA_ISR_TCIF3));
-}
-
-/**
- * @brief Get Channel 4 transfer complete flag.
- * @rmtoll ISR TCIF4 LL_DMA_IsActiveFlag_TC4
- * @param DMAx DMAx Instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC4(DMA_TypeDef *DMAx)
-{
- return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF4) == (DMA_ISR_TCIF4));
-}
-
-/**
- * @brief Get Channel 5 transfer complete flag.
- * @rmtoll ISR TCIF5 LL_DMA_IsActiveFlag_TC5
- * @param DMAx DMAx Instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC5(DMA_TypeDef *DMAx)
-{
- return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF5) == (DMA_ISR_TCIF5));
-}
-
-#if defined(DMA1_Channel6)
-/**
- * @brief Get Channel 6 transfer complete flag.
- * @rmtoll ISR TCIF6 LL_DMA_IsActiveFlag_TC6
- * @param DMAx DMAx Instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC6(DMA_TypeDef *DMAx)
-{
- return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF6) == (DMA_ISR_TCIF6));
-}
-#endif
-
-#if defined(DMA1_Channel7)
-/**
- * @brief Get Channel 7 transfer complete flag.
- * @rmtoll ISR TCIF7 LL_DMA_IsActiveFlag_TC7
- * @param DMAx DMAx Instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC7(DMA_TypeDef *DMAx)
-{
- return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF7) == (DMA_ISR_TCIF7));
-}
-#endif
-
-/**
- * @brief Get Channel 1 half transfer flag.
- * @rmtoll ISR HTIF1 LL_DMA_IsActiveFlag_HT1
- * @param DMAx DMAx Instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT1(DMA_TypeDef *DMAx)
-{
- return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF1) == (DMA_ISR_HTIF1));
-}
-
-/**
- * @brief Get Channel 2 half transfer flag.
- * @rmtoll ISR HTIF2 LL_DMA_IsActiveFlag_HT2
- * @param DMAx DMAx Instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT2(DMA_TypeDef *DMAx)
-{
- return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF2) == (DMA_ISR_HTIF2));
-}
-
-/**
- * @brief Get Channel 3 half transfer flag.
- * @rmtoll ISR HTIF3 LL_DMA_IsActiveFlag_HT3
- * @param DMAx DMAx Instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT3(DMA_TypeDef *DMAx)
-{
- return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF3) == (DMA_ISR_HTIF3));
-}
-
-/**
- * @brief Get Channel 4 half transfer flag.
- * @rmtoll ISR HTIF4 LL_DMA_IsActiveFlag_HT4
- * @param DMAx DMAx Instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT4(DMA_TypeDef *DMAx)
-{
- return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF4) == (DMA_ISR_HTIF4));
-}
-
-/**
- * @brief Get Channel 5 half transfer flag.
- * @rmtoll ISR HTIF5 LL_DMA_IsActiveFlag_HT5
- * @param DMAx DMAx Instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT5(DMA_TypeDef *DMAx)
-{
- return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF5) == (DMA_ISR_HTIF5));
-}
-
-#if defined(DMA1_Channel6)
-/**
- * @brief Get Channel 6 half transfer flag.
- * @rmtoll ISR HTIF6 LL_DMA_IsActiveFlag_HT6
- * @param DMAx DMAx Instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT6(DMA_TypeDef *DMAx)
-{
- return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF6) == (DMA_ISR_HTIF6));
-}
-#endif
-
-#if defined(DMA1_Channel7)
-/**
- * @brief Get Channel 7 half transfer flag.
- * @rmtoll ISR HTIF7 LL_DMA_IsActiveFlag_HT7
- * @param DMAx DMAx Instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT7(DMA_TypeDef *DMAx)
-{
- return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF7) == (DMA_ISR_HTIF7));
-}
-#endif
-
-/**
- * @brief Get Channel 1 transfer error flag.
- * @rmtoll ISR TEIF1 LL_DMA_IsActiveFlag_TE1
- * @param DMAx DMAx Instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE1(DMA_TypeDef *DMAx)
-{
- return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF1) == (DMA_ISR_TEIF1));
-}
-
-/**
- * @brief Get Channel 2 transfer error flag.
- * @rmtoll ISR TEIF2 LL_DMA_IsActiveFlag_TE2
- * @param DMAx DMAx Instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE2(DMA_TypeDef *DMAx)
-{
- return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF2) == (DMA_ISR_TEIF2));
-}
-
-/**
- * @brief Get Channel 3 transfer error flag.
- * @rmtoll ISR TEIF3 LL_DMA_IsActiveFlag_TE3
- * @param DMAx DMAx Instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE3(DMA_TypeDef *DMAx)
-{
- return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF3) == (DMA_ISR_TEIF3));
-}
-
-/**
- * @brief Get Channel 4 transfer error flag.
- * @rmtoll ISR TEIF4 LL_DMA_IsActiveFlag_TE4
- * @param DMAx DMAx Instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE4(DMA_TypeDef *DMAx)
-{
- return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF4) == (DMA_ISR_TEIF4));
-}
-
-/**
- * @brief Get Channel 5 transfer error flag.
- * @rmtoll ISR TEIF5 LL_DMA_IsActiveFlag_TE5
- * @param DMAx DMAx Instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE5(DMA_TypeDef *DMAx)
-{
- return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF5) == (DMA_ISR_TEIF5));
-}
-
-#if defined(DMA1_Channel6)
-/**
- * @brief Get Channel 6 transfer error flag.
- * @rmtoll ISR TEIF6 LL_DMA_IsActiveFlag_TE6
- * @param DMAx DMAx Instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE6(DMA_TypeDef *DMAx)
-{
- return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF6) == (DMA_ISR_TEIF6));
-}
-#endif
-
-#if defined(DMA1_Channel7)
-/**
- * @brief Get Channel 7 transfer error flag.
- * @rmtoll ISR TEIF7 LL_DMA_IsActiveFlag_TE7
- * @param DMAx DMAx Instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE7(DMA_TypeDef *DMAx)
-{
- return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF7) == (DMA_ISR_TEIF7));
-}
-#endif
-
-/**
- * @brief Clear Channel 1 global interrupt flag.
- * @rmtoll IFCR CGIF1 LL_DMA_ClearFlag_GI1
- * @param DMAx DMAx Instance
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_ClearFlag_GI1(DMA_TypeDef *DMAx)
-{
- WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF1);
-}
-
-/**
- * @brief Clear Channel 2 global interrupt flag.
- * @rmtoll IFCR CGIF2 LL_DMA_ClearFlag_GI2
- * @param DMAx DMAx Instance
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_ClearFlag_GI2(DMA_TypeDef *DMAx)
-{
- WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF2);
-}
-
-/**
- * @brief Clear Channel 3 global interrupt flag.
- * @rmtoll IFCR CGIF3 LL_DMA_ClearFlag_GI3
- * @param DMAx DMAx Instance
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_ClearFlag_GI3(DMA_TypeDef *DMAx)
-{
- WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF3);
-}
-
-/**
- * @brief Clear Channel 4 global interrupt flag.
- * @rmtoll IFCR CGIF4 LL_DMA_ClearFlag_GI4
- * @param DMAx DMAx Instance
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_ClearFlag_GI4(DMA_TypeDef *DMAx)
-{
- WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF4);
-}
-
-/**
- * @brief Clear Channel 5 global interrupt flag.
- * @rmtoll IFCR CGIF5 LL_DMA_ClearFlag_GI5
- * @param DMAx DMAx Instance
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_ClearFlag_GI5(DMA_TypeDef *DMAx)
-{
- WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF5);
-}
-
-#if defined(DMA1_Channel6)
-/**
- * @brief Clear Channel 6 global interrupt flag.
- * @rmtoll IFCR CGIF6 LL_DMA_ClearFlag_GI6
- * @param DMAx DMAx Instance
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_ClearFlag_GI6(DMA_TypeDef *DMAx)
-{
- WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF6);
-}
-#endif
-
-#if defined(DMA1_Channel7)
-/**
- * @brief Clear Channel 7 global interrupt flag.
- * @rmtoll IFCR CGIF7 LL_DMA_ClearFlag_GI7
- * @param DMAx DMAx Instance
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_ClearFlag_GI7(DMA_TypeDef *DMAx)
-{
- WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF7);
-}
-#endif
-
-/**
- * @brief Clear Channel 1 transfer complete flag.
- * @rmtoll IFCR CTCIF1 LL_DMA_ClearFlag_TC1
- * @param DMAx DMAx Instance
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_ClearFlag_TC1(DMA_TypeDef *DMAx)
-{
- WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF1);
-}
-
-/**
- * @brief Clear Channel 2 transfer complete flag.
- * @rmtoll IFCR CTCIF2 LL_DMA_ClearFlag_TC2
- * @param DMAx DMAx Instance
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_ClearFlag_TC2(DMA_TypeDef *DMAx)
-{
- WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF2);
-}
-
-/**
- * @brief Clear Channel 3 transfer complete flag.
- * @rmtoll IFCR CTCIF3 LL_DMA_ClearFlag_TC3
- * @param DMAx DMAx Instance
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_ClearFlag_TC3(DMA_TypeDef *DMAx)
-{
- WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF3);
-}
-
-/**
- * @brief Clear Channel 4 transfer complete flag.
- * @rmtoll IFCR CTCIF4 LL_DMA_ClearFlag_TC4
- * @param DMAx DMAx Instance
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_ClearFlag_TC4(DMA_TypeDef *DMAx)
-{
- WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF4);
-}
-
-/**
- * @brief Clear Channel 5 transfer complete flag.
- * @rmtoll IFCR CTCIF5 LL_DMA_ClearFlag_TC5
- * @param DMAx DMAx Instance
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_ClearFlag_TC5(DMA_TypeDef *DMAx)
-{
- WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF5);
-}
-
-#if defined(DMA1_Channel6)
-/**
- * @brief Clear Channel 6 transfer complete flag.
- * @rmtoll IFCR CTCIF6 LL_DMA_ClearFlag_TC6
- * @param DMAx DMAx Instance
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_ClearFlag_TC6(DMA_TypeDef *DMAx)
-{
- WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF6);
-}
-#endif
-
-#if defined(DMA1_Channel7)
-/**
- * @brief Clear Channel 7 transfer complete flag.
- * @rmtoll IFCR CTCIF7 LL_DMA_ClearFlag_TC7
- * @param DMAx DMAx Instance
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_ClearFlag_TC7(DMA_TypeDef *DMAx)
-{
- WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF7);
-}
-#endif
-
-/**
- * @brief Clear Channel 1 half transfer flag.
- * @rmtoll IFCR CHTIF1 LL_DMA_ClearFlag_HT1
- * @param DMAx DMAx Instance
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_ClearFlag_HT1(DMA_TypeDef *DMAx)
-{
- WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF1);
-}
-
-/**
- * @brief Clear Channel 2 half transfer flag.
- * @rmtoll IFCR CHTIF2 LL_DMA_ClearFlag_HT2
- * @param DMAx DMAx Instance
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_ClearFlag_HT2(DMA_TypeDef *DMAx)
-{
- WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF2);
-}
-
-/**
- * @brief Clear Channel 3 half transfer flag.
- * @rmtoll IFCR CHTIF3 LL_DMA_ClearFlag_HT3
- * @param DMAx DMAx Instance
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_ClearFlag_HT3(DMA_TypeDef *DMAx)
-{
- WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF3);
-}
-
-/**
- * @brief Clear Channel 4 half transfer flag.
- * @rmtoll IFCR CHTIF4 LL_DMA_ClearFlag_HT4
- * @param DMAx DMAx Instance
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_ClearFlag_HT4(DMA_TypeDef *DMAx)
-{
- WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF4);
-}
-
-/**
- * @brief Clear Channel 5 half transfer flag.
- * @rmtoll IFCR CHTIF5 LL_DMA_ClearFlag_HT5
- * @param DMAx DMAx Instance
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_ClearFlag_HT5(DMA_TypeDef *DMAx)
-{
- WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF5);
-}
-
-#if defined(DMA1_Channel6)
-/**
- * @brief Clear Channel 6 half transfer flag.
- * @rmtoll IFCR CHTIF6 LL_DMA_ClearFlag_HT6
- * @param DMAx DMAx Instance
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_ClearFlag_HT6(DMA_TypeDef *DMAx)
-{
- WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF6);
-}
-#endif
-
-#if defined(DMA1_Channel7)
-/**
- * @brief Clear Channel 7 half transfer flag.
- * @rmtoll IFCR CHTIF7 LL_DMA_ClearFlag_HT7
- * @param DMAx DMAx Instance
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_ClearFlag_HT7(DMA_TypeDef *DMAx)
-{
- WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF7);
-}
-#endif
-
-/**
- * @brief Clear Channel 1 transfer error flag.
- * @rmtoll IFCR CTEIF1 LL_DMA_ClearFlag_TE1
- * @param DMAx DMAx Instance
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_ClearFlag_TE1(DMA_TypeDef *DMAx)
-{
- WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF1);
-}
-
-/**
- * @brief Clear Channel 2 transfer error flag.
- * @rmtoll IFCR CTEIF2 LL_DMA_ClearFlag_TE2
- * @param DMAx DMAx Instance
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_ClearFlag_TE2(DMA_TypeDef *DMAx)
-{
- WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF2);
-}
-
-/**
- * @brief Clear Channel 3 transfer error flag.
- * @rmtoll IFCR CTEIF3 LL_DMA_ClearFlag_TE3
- * @param DMAx DMAx Instance
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_ClearFlag_TE3(DMA_TypeDef *DMAx)
-{
- WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF3);
-}
-
-/**
- * @brief Clear Channel 4 transfer error flag.
- * @rmtoll IFCR CTEIF4 LL_DMA_ClearFlag_TE4
- * @param DMAx DMAx Instance
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_ClearFlag_TE4(DMA_TypeDef *DMAx)
-{
- WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF4);
-}
-
-/**
- * @brief Clear Channel 5 transfer error flag.
- * @rmtoll IFCR CTEIF5 LL_DMA_ClearFlag_TE5
- * @param DMAx DMAx Instance
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_ClearFlag_TE5(DMA_TypeDef *DMAx)
-{
- WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF5);
-}
-
-#if defined(DMA1_Channel6)
-/**
- * @brief Clear Channel 6 transfer error flag.
- * @rmtoll IFCR CTEIF6 LL_DMA_ClearFlag_TE6
- * @param DMAx DMAx Instance
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_ClearFlag_TE6(DMA_TypeDef *DMAx)
-{
- WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF6);
-}
-#endif
-
-#if defined(DMA1_Channel7)
-/**
- * @brief Clear Channel 7 transfer error flag.
- * @rmtoll IFCR CTEIF7 LL_DMA_ClearFlag_TE7
- * @param DMAx DMAx Instance
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_ClearFlag_TE7(DMA_TypeDef *DMAx)
-{
- WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF7);
-}
-#endif
-
-/**
- * @}
- */
-
-/** @defgroup DMA_LL_EF_IT_Management IT_Management
- * @{
- */
-/**
- * @brief Enable Transfer complete interrupt.
- * @rmtoll CCR TCIE LL_DMA_EnableIT_TC
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_EnableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel)
-{
- SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_TCIE);
-}
-
-/**
- * @brief Enable Half transfer interrupt.
- * @rmtoll CCR HTIE LL_DMA_EnableIT_HT
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_EnableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel)
-{
- SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_HTIE);
-}
-
-/**
- * @brief Enable Transfer error interrupt.
- * @rmtoll CCR TEIE LL_DMA_EnableIT_TE
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_EnableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel)
-{
- SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_TEIE);
-}
-
-/**
- * @brief Disable Transfer complete interrupt.
- * @rmtoll CCR TCIE LL_DMA_DisableIT_TC
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_DisableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel)
-{
- CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_TCIE);
-}
-
-/**
- * @brief Disable Half transfer interrupt.
- * @rmtoll CCR HTIE LL_DMA_DisableIT_HT
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_DisableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel)
-{
- CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_HTIE);
-}
-
-/**
- * @brief Disable Transfer error interrupt.
- * @rmtoll CCR TEIE LL_DMA_DisableIT_TE
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @retval None
- */
-__STATIC_INLINE void LL_DMA_DisableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel)
-{
- CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_TEIE);
-}
-
-/**
- * @brief Check if Transfer complete Interrupt is enabled.
- * @rmtoll CCR TCIE LL_DMA_IsEnabledIT_TC
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TC(DMA_TypeDef *DMAx, uint32_t Channel)
-{
- return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
- DMA_CCR_TCIE) == (DMA_CCR_TCIE));
-}
-
-/**
- * @brief Check if Half transfer Interrupt is enabled.
- * @rmtoll CCR HTIE LL_DMA_IsEnabledIT_HT
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_HT(DMA_TypeDef *DMAx, uint32_t Channel)
-{
- return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
- DMA_CCR_HTIE) == (DMA_CCR_HTIE));
-}
-
-/**
- * @brief Check if Transfer error Interrupt is enabled.
- * @rmtoll CCR TEIE LL_DMA_IsEnabledIT_TE
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6
- * @arg @ref LL_DMA_CHANNEL_7
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TE(DMA_TypeDef *DMAx, uint32_t Channel)
-{
- return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
- DMA_CCR_TEIE) == (DMA_CCR_TEIE));
-}
-
-/**
- * @}
- */
-
-#if defined(USE_FULL_LL_DRIVER)
-/** @defgroup DMA_LL_EF_Init Initialization and de-initialization functions
- * @{
- */
-
-uint32_t LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Channel, LL_DMA_InitTypeDef *DMA_InitStruct);
-uint32_t LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Channel);
-void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct);
-
-/**
- * @}
- */
-#endif /* USE_FULL_LL_DRIVER */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* DMA1 || DMA2 */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F0xx_LL_DMA_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|