diff options
Diffstat (limited to 'hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_bus.h')
| -rw-r--r-- | hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_bus.h | 845 |
1 files changed, 0 insertions, 845 deletions
diff --git a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_bus.h b/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_bus.h deleted file mode 100644 index b85c02f..0000000 --- a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_bus.h +++ /dev/null @@ -1,845 +0,0 @@ -/**
- ******************************************************************************
- * @file stm32f0xx_ll_bus.h
- * @author MCD Application Team
- * @brief Header file of BUS LL module.
-
- @verbatim
- ##### RCC Limitations #####
- ==============================================================================
- [..]
- A delay between an RCC peripheral clock enable and the effective peripheral
- enabling should be taken into account in order to manage the peripheral read/write
- from/to registers.
- (+) This delay depends on the peripheral mapping.
- (++) AHB & APB peripherals, 1 dummy read is necessary
-
- [..]
- Workarounds:
- (#) For AHB & APB peripherals, a dummy read to the peripheral register has been
- inserted in each LL_{BUS}_GRP{x}_EnableClock() function.
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F0xx_LL_BUS_H
-#define __STM32F0xx_LL_BUS_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx.h"
-
-/** @addtogroup STM32F0xx_LL_Driver
- * @{
- */
-
-#if defined(RCC)
-
-/** @defgroup BUS_LL BUS
- * @{
- */
-
-/* Private types -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-
-/* Private constants ---------------------------------------------------------*/
-
-/* Private macros ------------------------------------------------------------*/
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup BUS_LL_Exported_Constants BUS Exported Constants
- * @{
- */
-
-/** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH
- * @{
- */
-#define LL_AHB1_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU
-#define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHBENR_DMA1EN
-#if defined(DMA2)
-#define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHBENR_DMA2EN
-#endif /*DMA2*/
-#define LL_AHB1_GRP1_PERIPH_SRAM RCC_AHBENR_SRAMEN
-#define LL_AHB1_GRP1_PERIPH_FLASH RCC_AHBENR_FLITFEN
-#define LL_AHB1_GRP1_PERIPH_CRC RCC_AHBENR_CRCEN
-#define LL_AHB1_GRP1_PERIPH_GPIOA RCC_AHBENR_GPIOAEN
-#define LL_AHB1_GRP1_PERIPH_GPIOB RCC_AHBENR_GPIOBEN
-#define LL_AHB1_GRP1_PERIPH_GPIOC RCC_AHBENR_GPIOCEN
-#if defined(GPIOD)
-#define LL_AHB1_GRP1_PERIPH_GPIOD RCC_AHBENR_GPIODEN
-#endif /*GPIOD*/
-#if defined(GPIOE)
-#define LL_AHB1_GRP1_PERIPH_GPIOE RCC_AHBENR_GPIOEEN
-#endif /*GPIOE*/
-#define LL_AHB1_GRP1_PERIPH_GPIOF RCC_AHBENR_GPIOFEN
-#if defined(TSC)
-#define LL_AHB1_GRP1_PERIPH_TSC RCC_AHBENR_TSCEN
-#endif /*TSC*/
-/**
- * @}
- */
-
-/** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH
- * @{
- */
-#define LL_APB1_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU
-#if defined(TIM2)
-#define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1ENR_TIM2EN
-#endif /*TIM2*/
-#define LL_APB1_GRP1_PERIPH_TIM3 RCC_APB1ENR_TIM3EN
-#if defined(TIM6)
-#define LL_APB1_GRP1_PERIPH_TIM6 RCC_APB1ENR_TIM6EN
-#endif /*TIM6*/
-#if defined(TIM7)
-#define LL_APB1_GRP1_PERIPH_TIM7 RCC_APB1ENR_TIM7EN
-#endif /*TIM7*/
-#define LL_APB1_GRP1_PERIPH_TIM14 RCC_APB1ENR_TIM14EN
-#define LL_APB1_GRP1_PERIPH_WWDG RCC_APB1ENR_WWDGEN
-#if defined(SPI2)
-#define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1ENR_SPI2EN
-#endif /*SPI2*/
-#if defined(USART2)
-#define LL_APB1_GRP1_PERIPH_USART2 RCC_APB1ENR_USART2EN
-#endif /* USART2 */
-#if defined(USART3)
-#define LL_APB1_GRP1_PERIPH_USART3 RCC_APB1ENR_USART3EN
-#endif /* USART3 */
-#if defined(USART4)
-#define LL_APB1_GRP1_PERIPH_USART4 RCC_APB1ENR_USART4EN
-#endif /* USART4 */
-#if defined(USART5)
-#define LL_APB1_GRP1_PERIPH_USART5 RCC_APB1ENR_USART5EN
-#endif /* USART5 */
-#define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1ENR_I2C1EN
-#if defined(I2C2)
-#define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1ENR_I2C2EN
-#endif /*I2C2*/
-#if defined(USB)
-#define LL_APB1_GRP1_PERIPH_USB RCC_APB1ENR_USBEN
-#endif /* USB */
-#if defined(CAN)
-#define LL_APB1_GRP1_PERIPH_CAN RCC_APB1ENR_CANEN
-#endif /*CAN*/
-#if defined(CRS)
-#define LL_APB1_GRP1_PERIPH_CRS RCC_APB1ENR_CRSEN
-#endif /*CRS*/
-#define LL_APB1_GRP1_PERIPH_PWR RCC_APB1ENR_PWREN
-#if defined(DAC)
-#define LL_APB1_GRP1_PERIPH_DAC1 RCC_APB1ENR_DACEN
-#endif /*DAC*/
-#if defined(CEC)
-#define LL_APB1_GRP1_PERIPH_CEC RCC_APB1ENR_CECEN
-#endif /*CEC*/
-/**
- * @}
- */
-
-/** @defgroup BUS_LL_EC_APB1_GRP2_PERIPH APB1 GRP2 PERIPH
- * @{
- */
-#define LL_APB1_GRP2_PERIPH_ALL (uint32_t)0xFFFFFFFFU
-#define LL_APB1_GRP2_PERIPH_SYSCFG RCC_APB2ENR_SYSCFGEN
-#define LL_APB1_GRP2_PERIPH_ADC1 RCC_APB2ENR_ADC1EN
-#if defined(USART8)
-#define LL_APB1_GRP2_PERIPH_USART8 RCC_APB2ENR_USART8EN
-#endif /*USART8*/
-#if defined(USART7)
-#define LL_APB1_GRP2_PERIPH_USART7 RCC_APB2ENR_USART7EN
-#endif /*USART7*/
-#if defined(USART6)
-#define LL_APB1_GRP2_PERIPH_USART6 RCC_APB2ENR_USART6EN
-#endif /*USART6*/
-#define LL_APB1_GRP2_PERIPH_TIM1 RCC_APB2ENR_TIM1EN
-#define LL_APB1_GRP2_PERIPH_SPI1 RCC_APB2ENR_SPI1EN
-#define LL_APB1_GRP2_PERIPH_USART1 RCC_APB2ENR_USART1EN
-#if defined(TIM15)
-#define LL_APB1_GRP2_PERIPH_TIM15 RCC_APB2ENR_TIM15EN
-#endif /*TIM15*/
-#define LL_APB1_GRP2_PERIPH_TIM16 RCC_APB2ENR_TIM16EN
-#define LL_APB1_GRP2_PERIPH_TIM17 RCC_APB2ENR_TIM17EN
-#define LL_APB1_GRP2_PERIPH_DBGMCU RCC_APB2ENR_DBGMCUEN
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup BUS_LL_Exported_Functions BUS Exported Functions
- * @{
- */
-
-/** @defgroup BUS_LL_EF_AHB1 AHB1
- * @{
- */
-
-/**
- * @brief Enable AHB1 peripherals clock.
- * @rmtoll AHBENR DMA1EN LL_AHB1_GRP1_EnableClock\n
- * AHBENR DMA2EN LL_AHB1_GRP1_EnableClock\n
- * AHBENR SRAMEN LL_AHB1_GRP1_EnableClock\n
- * AHBENR FLITFEN LL_AHB1_GRP1_EnableClock\n
- * AHBENR CRCEN LL_AHB1_GRP1_EnableClock\n
- * AHBENR GPIOAEN LL_AHB1_GRP1_EnableClock\n
- * AHBENR GPIOBEN LL_AHB1_GRP1_EnableClock\n
- * AHBENR GPIOCEN LL_AHB1_GRP1_EnableClock\n
- * AHBENR GPIODEN LL_AHB1_GRP1_EnableClock\n
- * AHBENR GPIOEEN LL_AHB1_GRP1_EnableClock\n
- * AHBENR GPIOFEN LL_AHB1_GRP1_EnableClock\n
- * AHBENR TSCEN LL_AHB1_GRP1_EnableClock
- * @param Periphs This parameter can be a combination of the following values:
- * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
- * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*)
- * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM
- * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
- * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
- * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
- * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
- * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
- * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
- * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
- * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
- * @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*)
- *
- * (*) value not defined in all devices.
- * @retval None
-*/
-__STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs)
-{
- __IO uint32_t tmpreg;
- SET_BIT(RCC->AHBENR, Periphs);
- /* Delay after an RCC peripheral clock enabling */
- tmpreg = READ_BIT(RCC->AHBENR, Periphs);
- (void)tmpreg;
-}
-
-/**
- * @brief Check if AHB1 peripheral clock is enabled or not
- * @rmtoll AHBENR DMA1EN LL_AHB1_GRP1_IsEnabledClock\n
- * AHBENR DMA2EN LL_AHB1_GRP1_IsEnabledClock\n
- * AHBENR SRAMEN LL_AHB1_GRP1_IsEnabledClock\n
- * AHBENR FLITFEN LL_AHB1_GRP1_IsEnabledClock\n
- * AHBENR CRCEN LL_AHB1_GRP1_IsEnabledClock\n
- * AHBENR GPIOAEN LL_AHB1_GRP1_IsEnabledClock\n
- * AHBENR GPIOBEN LL_AHB1_GRP1_IsEnabledClock\n
- * AHBENR GPIOCEN LL_AHB1_GRP1_IsEnabledClock\n
- * AHBENR GPIODEN LL_AHB1_GRP1_IsEnabledClock\n
- * AHBENR GPIOEEN LL_AHB1_GRP1_IsEnabledClock\n
- * AHBENR GPIOFEN LL_AHB1_GRP1_IsEnabledClock\n
- * AHBENR TSCEN LL_AHB1_GRP1_IsEnabledClock
- * @param Periphs This parameter can be a combination of the following values:
- * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
- * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*)
- * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM
- * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
- * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
- * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
- * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
- * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
- * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
- * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
- * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
- * @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*)
- *
- * (*) value not defined in all devices.
- * @retval State of Periphs (1 or 0).
-*/
-__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs)
-{
- return (READ_BIT(RCC->AHBENR, Periphs) == Periphs);
-}
-
-/**
- * @brief Disable AHB1 peripherals clock.
- * @rmtoll AHBENR DMA1EN LL_AHB1_GRP1_DisableClock\n
- * AHBENR DMA2EN LL_AHB1_GRP1_DisableClock\n
- * AHBENR SRAMEN LL_AHB1_GRP1_DisableClock\n
- * AHBENR FLITFEN LL_AHB1_GRP1_DisableClock\n
- * AHBENR CRCEN LL_AHB1_GRP1_DisableClock\n
- * AHBENR GPIOAEN LL_AHB1_GRP1_DisableClock\n
- * AHBENR GPIOBEN LL_AHB1_GRP1_DisableClock\n
- * AHBENR GPIOCEN LL_AHB1_GRP1_DisableClock\n
- * AHBENR GPIODEN LL_AHB1_GRP1_DisableClock\n
- * AHBENR GPIOEEN LL_AHB1_GRP1_DisableClock\n
- * AHBENR GPIOFEN LL_AHB1_GRP1_DisableClock\n
- * AHBENR TSCEN LL_AHB1_GRP1_DisableClock
- * @param Periphs This parameter can be a combination of the following values:
- * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
- * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*)
- * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM
- * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
- * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
- * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
- * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
- * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
- * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
- * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
- * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
- * @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*)
- *
- * (*) value not defined in all devices.
- * @retval None
-*/
-__STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs)
-{
- CLEAR_BIT(RCC->AHBENR, Periphs);
-}
-
-/**
- * @brief Force AHB1 peripherals reset.
- * @rmtoll AHBRSTR GPIOARST LL_AHB1_GRP1_ForceReset\n
- * AHBRSTR GPIOBRST LL_AHB1_GRP1_ForceReset\n
- * AHBRSTR GPIOCRST LL_AHB1_GRP1_ForceReset\n
- * AHBRSTR GPIODRST LL_AHB1_GRP1_ForceReset\n
- * AHBRSTR GPIOERST LL_AHB1_GRP1_ForceReset\n
- * AHBRSTR GPIOFRST LL_AHB1_GRP1_ForceReset\n
- * AHBRSTR TSCRST LL_AHB1_GRP1_ForceReset
- * @param Periphs This parameter can be a combination of the following values:
- * @arg @ref LL_AHB1_GRP1_PERIPH_ALL
- * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
- * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
- * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
- * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
- * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
- * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
- * @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*)
- *
- * (*) value not defined in all devices.
- * @retval None
-*/
-__STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs)
-{
- SET_BIT(RCC->AHBRSTR, Periphs);
-}
-
-/**
- * @brief Release AHB1 peripherals reset.
- * @rmtoll AHBRSTR GPIOARST LL_AHB1_GRP1_ReleaseReset\n
- * AHBRSTR GPIOBRST LL_AHB1_GRP1_ReleaseReset\n
- * AHBRSTR GPIOCRST LL_AHB1_GRP1_ReleaseReset\n
- * AHBRSTR GPIODRST LL_AHB1_GRP1_ReleaseReset\n
- * AHBRSTR GPIOERST LL_AHB1_GRP1_ReleaseReset\n
- * AHBRSTR GPIOFRST LL_AHB1_GRP1_ReleaseReset\n
- * AHBRSTR TSCRST LL_AHB1_GRP1_ReleaseReset
- * @param Periphs This parameter can be a combination of the following values:
- * @arg @ref LL_AHB1_GRP1_PERIPH_ALL
- * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
- * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
- * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
- * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
- * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
- * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
- * @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*)
- *
- * (*) value not defined in all devices.
- * @retval None
-*/
-__STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs)
-{
- CLEAR_BIT(RCC->AHBRSTR, Periphs);
-}
-
-/**
- * @}
- */
-
-/** @defgroup BUS_LL_EF_APB1_GRP1 APB1 GRP1
- * @{
- */
-
-/**
- * @brief Enable APB1 peripherals clock (available in register 1).
- * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_EnableClock\n
- * APB1ENR TIM3EN LL_APB1_GRP1_EnableClock\n
- * APB1ENR TIM6EN LL_APB1_GRP1_EnableClock\n
- * APB1ENR TIM7EN LL_APB1_GRP1_EnableClock\n
- * APB1ENR TIM14EN LL_APB1_GRP1_EnableClock\n
- * APB1ENR WWDGEN LL_APB1_GRP1_EnableClock\n
- * APB1ENR SPI2EN LL_APB1_GRP1_EnableClock\n
- * APB1ENR USART2EN LL_APB1_GRP1_EnableClock\n
- * APB1ENR USART3EN LL_APB1_GRP1_EnableClock\n
- * APB1ENR USART4EN LL_APB1_GRP1_EnableClock\n
- * APB1ENR USART5EN LL_APB1_GRP1_EnableClock\n
- * APB1ENR I2C1EN LL_APB1_GRP1_EnableClock\n
- * APB1ENR I2C2EN LL_APB1_GRP1_EnableClock\n
- * APB1ENR USBEN LL_APB1_GRP1_EnableClock\n
- * APB1ENR CANEN LL_APB1_GRP1_EnableClock\n
- * APB1ENR CRSEN LL_APB1_GRP1_EnableClock\n
- * APB1ENR PWREN LL_APB1_GRP1_EnableClock\n
- * APB1ENR DACEN LL_APB1_GRP1_EnableClock\n
- * APB1ENR CECEN LL_APB1_GRP1_EnableClock
- * @param Periphs This parameter can be a combination of the following values:
- * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_TIM3
- * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_TIM14
- * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
- * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_USART2 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
- * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_CAN (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_PWR
- * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
- *
- * (*) value not defined in all devices.
- * @retval None
-*/
-__STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs)
-{
- __IO uint32_t tmpreg;
- SET_BIT(RCC->APB1ENR, Periphs);
- /* Delay after an RCC peripheral clock enabling */
- tmpreg = READ_BIT(RCC->APB1ENR, Periphs);
- (void)tmpreg;
-}
-
-/**
- * @brief Check if APB1 peripheral clock is enabled or not (available in register 1).
- * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_IsEnabledClock\n
- * APB1ENR TIM3EN LL_APB1_GRP1_IsEnabledClock\n
- * APB1ENR TIM6EN LL_APB1_GRP1_IsEnabledClock\n
- * APB1ENR TIM7EN LL_APB1_GRP1_IsEnabledClock\n
- * APB1ENR TIM14EN LL_APB1_GRP1_IsEnabledClock\n
- * APB1ENR WWDGEN LL_APB1_GRP1_IsEnabledClock\n
- * APB1ENR SPI2EN LL_APB1_GRP1_IsEnabledClock\n
- * APB1ENR USART2EN LL_APB1_GRP1_IsEnabledClock\n
- * APB1ENR USART3EN LL_APB1_GRP1_IsEnabledClock\n
- * APB1ENR USART4EN LL_APB1_GRP1_IsEnabledClock\n
- * APB1ENR USART5EN LL_APB1_GRP1_IsEnabledClock\n
- * APB1ENR I2C1EN LL_APB1_GRP1_IsEnabledClock\n
- * APB1ENR I2C2EN LL_APB1_GRP1_IsEnabledClock\n
- * APB1ENR USBEN LL_APB1_GRP1_IsEnabledClock\n
- * APB1ENR CANEN LL_APB1_GRP1_IsEnabledClock\n
- * APB1ENR CRSEN LL_APB1_GRP1_IsEnabledClock\n
- * APB1ENR PWREN LL_APB1_GRP1_IsEnabledClock\n
- * APB1ENR DACEN LL_APB1_GRP1_IsEnabledClock\n
- * APB1ENR CECEN LL_APB1_GRP1_IsEnabledClock
- * @param Periphs This parameter can be a combination of the following values:
- * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_TIM3
- * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_TIM14
- * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
- * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_USART2 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
- * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_CAN (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_PWR
- * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
- *
- * (*) value not defined in all devices.
- * @retval State of Periphs (1 or 0).
-*/
-__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs)
-{
- return (READ_BIT(RCC->APB1ENR, Periphs) == Periphs);
-}
-
-/**
- * @brief Disable APB1 peripherals clock (available in register 1).
- * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_DisableClock\n
- * APB1ENR TIM3EN LL_APB1_GRP1_DisableClock\n
- * APB1ENR TIM6EN LL_APB1_GRP1_DisableClock\n
- * APB1ENR TIM7EN LL_APB1_GRP1_DisableClock\n
- * APB1ENR TIM14EN LL_APB1_GRP1_DisableClock\n
- * APB1ENR WWDGEN LL_APB1_GRP1_DisableClock\n
- * APB1ENR SPI2EN LL_APB1_GRP1_DisableClock\n
- * APB1ENR USART2EN LL_APB1_GRP1_DisableClock\n
- * APB1ENR USART3EN LL_APB1_GRP1_DisableClock\n
- * APB1ENR USART4EN LL_APB1_GRP1_DisableClock\n
- * APB1ENR USART5EN LL_APB1_GRP1_DisableClock\n
- * APB1ENR I2C1EN LL_APB1_GRP1_DisableClock\n
- * APB1ENR I2C2EN LL_APB1_GRP1_DisableClock\n
- * APB1ENR USBEN LL_APB1_GRP1_DisableClock\n
- * APB1ENR CANEN LL_APB1_GRP1_DisableClock\n
- * APB1ENR CRSEN LL_APB1_GRP1_DisableClock\n
- * APB1ENR PWREN LL_APB1_GRP1_DisableClock\n
- * APB1ENR DACEN LL_APB1_GRP1_DisableClock\n
- * APB1ENR CECEN LL_APB1_GRP1_DisableClock
- * @param Periphs This parameter can be a combination of the following values:
- * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_TIM3
- * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_TIM14
- * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
- * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_USART2 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
- * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_CAN (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_PWR
- * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
- *
- * (*) value not defined in all devices.
- * @retval None
-*/
-__STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs)
-{
- CLEAR_BIT(RCC->APB1ENR, Periphs);
-}
-
-/**
- * @brief Force APB1 peripherals reset (available in register 1).
- * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ForceReset\n
- * APB1RSTR TIM3RST LL_APB1_GRP1_ForceReset\n
- * APB1RSTR TIM6RST LL_APB1_GRP1_ForceReset\n
- * APB1RSTR TIM7RST LL_APB1_GRP1_ForceReset\n
- * APB1RSTR TIM14RST LL_APB1_GRP1_ForceReset\n
- * APB1RSTR WWDGRST LL_APB1_GRP1_ForceReset\n
- * APB1RSTR SPI2RST LL_APB1_GRP1_ForceReset\n
- * APB1RSTR USART2RST LL_APB1_GRP1_ForceReset\n
- * APB1RSTR USART3RST LL_APB1_GRP1_ForceReset\n
- * APB1RSTR USART4RST LL_APB1_GRP1_ForceReset\n
- * APB1RSTR USART5RST LL_APB1_GRP1_ForceReset\n
- * APB1RSTR I2C1RST LL_APB1_GRP1_ForceReset\n
- * APB1RSTR I2C2RST LL_APB1_GRP1_ForceReset\n
- * APB1RSTR USBRST LL_APB1_GRP1_ForceReset\n
- * APB1RSTR CANRST LL_APB1_GRP1_ForceReset\n
- * APB1RSTR CRSRST LL_APB1_GRP1_ForceReset\n
- * APB1RSTR PWRRST LL_APB1_GRP1_ForceReset\n
- * APB1RSTR DACRST LL_APB1_GRP1_ForceReset\n
- * APB1RSTR CECRST LL_APB1_GRP1_ForceReset
- * @param Periphs This parameter can be a combination of the following values:
- * @arg @ref LL_APB1_GRP1_PERIPH_ALL
- * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_TIM3
- * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_TIM14
- * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
- * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_USART2 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
- * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_CAN (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_PWR
- * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
- *
- * (*) value not defined in all devices.
- * @retval None
-*/
-__STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs)
-{
- SET_BIT(RCC->APB1RSTR, Periphs);
-}
-
-/**
- * @brief Release APB1 peripherals reset (available in register 1).
- * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ReleaseReset\n
- * APB1RSTR TIM3RST LL_APB1_GRP1_ReleaseReset\n
- * APB1RSTR TIM6RST LL_APB1_GRP1_ReleaseReset\n
- * APB1RSTR TIM7RST LL_APB1_GRP1_ReleaseReset\n
- * APB1RSTR TIM14RST LL_APB1_GRP1_ReleaseReset\n
- * APB1RSTR WWDGRST LL_APB1_GRP1_ReleaseReset\n
- * APB1RSTR SPI2RST LL_APB1_GRP1_ReleaseReset\n
- * APB1RSTR USART2RST LL_APB1_GRP1_ReleaseReset\n
- * APB1RSTR USART3RST LL_APB1_GRP1_ReleaseReset\n
- * APB1RSTR USART4RST LL_APB1_GRP1_ReleaseReset\n
- * APB1RSTR USART5RST LL_APB1_GRP1_ReleaseReset\n
- * APB1RSTR I2C1RST LL_APB1_GRP1_ReleaseReset\n
- * APB1RSTR I2C2RST LL_APB1_GRP1_ReleaseReset\n
- * APB1RSTR USBRST LL_APB1_GRP1_ReleaseReset\n
- * APB1RSTR CANRST LL_APB1_GRP1_ReleaseReset\n
- * APB1RSTR CRSRST LL_APB1_GRP1_ReleaseReset\n
- * APB1RSTR PWRRST LL_APB1_GRP1_ReleaseReset\n
- * APB1RSTR DACRST LL_APB1_GRP1_ReleaseReset\n
- * APB1RSTR CECRST LL_APB1_GRP1_ReleaseReset
- * @param Periphs This parameter can be a combination of the following values:
- * @arg @ref LL_APB1_GRP1_PERIPH_ALL
- * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_TIM3
- * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_TIM14
- * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
- * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_USART2 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
- * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_CAN (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_PWR
- * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
- * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
- *
- * (*) value not defined in all devices.
- * @retval None
-*/
-__STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs)
-{
- CLEAR_BIT(RCC->APB1RSTR, Periphs);
-}
-
-/**
- * @}
- */
-
-/** @defgroup BUS_LL_EF_APB1_GRP2 APB1 GRP2
- * @{
- */
-
-/**
- * @brief Enable APB1 peripherals clock (available in register 2).
- * @rmtoll APB2ENR SYSCFGEN LL_APB1_GRP2_EnableClock\n
- * APB2ENR ADC1EN LL_APB1_GRP2_EnableClock\n
- * APB2ENR USART8EN LL_APB1_GRP2_EnableClock\n
- * APB2ENR USART7EN LL_APB1_GRP2_EnableClock\n
- * APB2ENR USART6EN LL_APB1_GRP2_EnableClock\n
- * APB2ENR TIM1EN LL_APB1_GRP2_EnableClock\n
- * APB2ENR SPI1EN LL_APB1_GRP2_EnableClock\n
- * APB2ENR USART1EN LL_APB1_GRP2_EnableClock\n
- * APB2ENR TIM15EN LL_APB1_GRP2_EnableClock\n
- * APB2ENR TIM16EN LL_APB1_GRP2_EnableClock\n
- * APB2ENR TIM17EN LL_APB1_GRP2_EnableClock\n
- * APB2ENR DBGMCUEN LL_APB1_GRP2_EnableClock
- * @param Periphs This parameter can be a combination of the following values:
- * @arg @ref LL_APB1_GRP2_PERIPH_SYSCFG
- * @arg @ref LL_APB1_GRP2_PERIPH_ADC1
- * @arg @ref LL_APB1_GRP2_PERIPH_USART8 (*)
- * @arg @ref LL_APB1_GRP2_PERIPH_USART7 (*)
- * @arg @ref LL_APB1_GRP2_PERIPH_USART6 (*)
- * @arg @ref LL_APB1_GRP2_PERIPH_TIM1
- * @arg @ref LL_APB1_GRP2_PERIPH_SPI1
- * @arg @ref LL_APB1_GRP2_PERIPH_USART1
- * @arg @ref LL_APB1_GRP2_PERIPH_TIM15 (*)
- * @arg @ref LL_APB1_GRP2_PERIPH_TIM16
- * @arg @ref LL_APB1_GRP2_PERIPH_TIM17
- * @arg @ref LL_APB1_GRP2_PERIPH_DBGMCU
- *
- * (*) value not defined in all devices.
- * @retval None
-*/
-__STATIC_INLINE void LL_APB1_GRP2_EnableClock(uint32_t Periphs)
-{
- __IO uint32_t tmpreg;
- SET_BIT(RCC->APB2ENR, Periphs);
- /* Delay after an RCC peripheral clock enabling */
- tmpreg = READ_BIT(RCC->APB2ENR, Periphs);
- (void)tmpreg;
-}
-
-/**
- * @brief Check if APB1 peripheral clock is enabled or not (available in register 2).
- * @rmtoll APB2ENR SYSCFGEN LL_APB1_GRP2_IsEnabledClock\n
- * APB2ENR ADC1EN LL_APB1_GRP2_IsEnabledClock\n
- * APB2ENR USART8EN LL_APB1_GRP2_IsEnabledClock\n
- * APB2ENR USART7EN LL_APB1_GRP2_IsEnabledClock\n
- * APB2ENR USART6EN LL_APB1_GRP2_IsEnabledClock\n
- * APB2ENR TIM1EN LL_APB1_GRP2_IsEnabledClock\n
- * APB2ENR SPI1EN LL_APB1_GRP2_IsEnabledClock\n
- * APB2ENR USART1EN LL_APB1_GRP2_IsEnabledClock\n
- * APB2ENR TIM15EN LL_APB1_GRP2_IsEnabledClock\n
- * APB2ENR TIM16EN LL_APB1_GRP2_IsEnabledClock\n
- * APB2ENR TIM17EN LL_APB1_GRP2_IsEnabledClock\n
- * APB2ENR DBGMCUEN LL_APB1_GRP2_IsEnabledClock
- * @param Periphs This parameter can be a combination of the following values:
- * @arg @ref LL_APB1_GRP2_PERIPH_SYSCFG
- * @arg @ref LL_APB1_GRP2_PERIPH_ADC1
- * @arg @ref LL_APB1_GRP2_PERIPH_USART8 (*)
- * @arg @ref LL_APB1_GRP2_PERIPH_USART7 (*)
- * @arg @ref LL_APB1_GRP2_PERIPH_USART6 (*)
- * @arg @ref LL_APB1_GRP2_PERIPH_TIM1
- * @arg @ref LL_APB1_GRP2_PERIPH_SPI1
- * @arg @ref LL_APB1_GRP2_PERIPH_USART1
- * @arg @ref LL_APB1_GRP2_PERIPH_TIM15 (*)
- * @arg @ref LL_APB1_GRP2_PERIPH_TIM16
- * @arg @ref LL_APB1_GRP2_PERIPH_TIM17
- * @arg @ref LL_APB1_GRP2_PERIPH_DBGMCU
- *
- * (*) value not defined in all devices.
- * @retval State of Periphs (1 or 0).
-*/
-__STATIC_INLINE uint32_t LL_APB1_GRP2_IsEnabledClock(uint32_t Periphs)
-{
- return (READ_BIT(RCC->APB2ENR, Periphs) == Periphs);
-}
-
-/**
- * @brief Disable APB1 peripherals clock (available in register 2).
- * @rmtoll APB2ENR SYSCFGEN LL_APB1_GRP2_DisableClock\n
- * APB2ENR ADC1EN LL_APB1_GRP2_DisableClock\n
- * APB2ENR USART8EN LL_APB1_GRP2_DisableClock\n
- * APB2ENR USART7EN LL_APB1_GRP2_DisableClock\n
- * APB2ENR USART6EN LL_APB1_GRP2_DisableClock\n
- * APB2ENR TIM1EN LL_APB1_GRP2_DisableClock\n
- * APB2ENR SPI1EN LL_APB1_GRP2_DisableClock\n
- * APB2ENR USART1EN LL_APB1_GRP2_DisableClock\n
- * APB2ENR TIM15EN LL_APB1_GRP2_DisableClock\n
- * APB2ENR TIM16EN LL_APB1_GRP2_DisableClock\n
- * APB2ENR TIM17EN LL_APB1_GRP2_DisableClock\n
- * APB2ENR DBGMCUEN LL_APB1_GRP2_DisableClock
- * @param Periphs This parameter can be a combination of the following values:
- * @arg @ref LL_APB1_GRP2_PERIPH_SYSCFG
- * @arg @ref LL_APB1_GRP2_PERIPH_ADC1
- * @arg @ref LL_APB1_GRP2_PERIPH_USART8 (*)
- * @arg @ref LL_APB1_GRP2_PERIPH_USART7 (*)
- * @arg @ref LL_APB1_GRP2_PERIPH_USART6 (*)
- * @arg @ref LL_APB1_GRP2_PERIPH_TIM1
- * @arg @ref LL_APB1_GRP2_PERIPH_SPI1
- * @arg @ref LL_APB1_GRP2_PERIPH_USART1
- * @arg @ref LL_APB1_GRP2_PERIPH_TIM15 (*)
- * @arg @ref LL_APB1_GRP2_PERIPH_TIM16
- * @arg @ref LL_APB1_GRP2_PERIPH_TIM17
- * @arg @ref LL_APB1_GRP2_PERIPH_DBGMCU
- *
- * (*) value not defined in all devices.
- * @retval None
-*/
-__STATIC_INLINE void LL_APB1_GRP2_DisableClock(uint32_t Periphs)
-{
- CLEAR_BIT(RCC->APB2ENR, Periphs);
-}
-
-/**
- * @brief Force APB1 peripherals reset (available in register 2).
- * @rmtoll APB2RSTR SYSCFGRST LL_APB1_GRP2_ForceReset\n
- * APB2RSTR ADC1RST LL_APB1_GRP2_ForceReset\n
- * APB2RSTR USART8RST LL_APB1_GRP2_ForceReset\n
- * APB2RSTR USART7RST LL_APB1_GRP2_ForceReset\n
- * APB2RSTR USART6RST LL_APB1_GRP2_ForceReset\n
- * APB2RSTR TIM1RST LL_APB1_GRP2_ForceReset\n
- * APB2RSTR SPI1RST LL_APB1_GRP2_ForceReset\n
- * APB2RSTR USART1RST LL_APB1_GRP2_ForceReset\n
- * APB2RSTR TIM15RST LL_APB1_GRP2_ForceReset\n
- * APB2RSTR TIM16RST LL_APB1_GRP2_ForceReset\n
- * APB2RSTR TIM17RST LL_APB1_GRP2_ForceReset\n
- * APB2RSTR DBGMCURST LL_APB1_GRP2_ForceReset
- * @param Periphs This parameter can be a combination of the following values:
- * @arg @ref LL_APB1_GRP2_PERIPH_ALL
- * @arg @ref LL_APB1_GRP2_PERIPH_SYSCFG
- * @arg @ref LL_APB1_GRP2_PERIPH_ADC1
- * @arg @ref LL_APB1_GRP2_PERIPH_USART8 (*)
- * @arg @ref LL_APB1_GRP2_PERIPH_USART7 (*)
- * @arg @ref LL_APB1_GRP2_PERIPH_USART6 (*)
- * @arg @ref LL_APB1_GRP2_PERIPH_TIM1
- * @arg @ref LL_APB1_GRP2_PERIPH_SPI1
- * @arg @ref LL_APB1_GRP2_PERIPH_USART1
- * @arg @ref LL_APB1_GRP2_PERIPH_TIM15 (*)
- * @arg @ref LL_APB1_GRP2_PERIPH_TIM16
- * @arg @ref LL_APB1_GRP2_PERIPH_TIM17
- * @arg @ref LL_APB1_GRP2_PERIPH_DBGMCU
- *
- * (*) value not defined in all devices.
- * @retval None
-*/
-__STATIC_INLINE void LL_APB1_GRP2_ForceReset(uint32_t Periphs)
-{
- SET_BIT(RCC->APB2RSTR, Periphs);
-}
-
-/**
- * @brief Release APB1 peripherals reset (available in register 2).
- * @rmtoll APB2RSTR SYSCFGRST LL_APB1_GRP2_ReleaseReset\n
- * APB2RSTR ADC1RST LL_APB1_GRP2_ReleaseReset\n
- * APB2RSTR USART8RST LL_APB1_GRP2_ReleaseReset\n
- * APB2RSTR USART7RST LL_APB1_GRP2_ReleaseReset\n
- * APB2RSTR USART6RST LL_APB1_GRP2_ReleaseReset\n
- * APB2RSTR TIM1RST LL_APB1_GRP2_ReleaseReset\n
- * APB2RSTR SPI1RST LL_APB1_GRP2_ReleaseReset\n
- * APB2RSTR USART1RST LL_APB1_GRP2_ReleaseReset\n
- * APB2RSTR TIM15RST LL_APB1_GRP2_ReleaseReset\n
- * APB2RSTR TIM16RST LL_APB1_GRP2_ReleaseReset\n
- * APB2RSTR TIM17RST LL_APB1_GRP2_ReleaseReset\n
- * APB2RSTR DBGMCURST LL_APB1_GRP2_ReleaseReset
- * @param Periphs This parameter can be a combination of the following values:
- * @arg @ref LL_APB1_GRP2_PERIPH_ALL
- * @arg @ref LL_APB1_GRP2_PERIPH_SYSCFG
- * @arg @ref LL_APB1_GRP2_PERIPH_ADC1
- * @arg @ref LL_APB1_GRP2_PERIPH_USART8 (*)
- * @arg @ref LL_APB1_GRP2_PERIPH_USART7 (*)
- * @arg @ref LL_APB1_GRP2_PERIPH_USART6 (*)
- * @arg @ref LL_APB1_GRP2_PERIPH_TIM1
- * @arg @ref LL_APB1_GRP2_PERIPH_SPI1
- * @arg @ref LL_APB1_GRP2_PERIPH_USART1
- * @arg @ref LL_APB1_GRP2_PERIPH_TIM15 (*)
- * @arg @ref LL_APB1_GRP2_PERIPH_TIM16
- * @arg @ref LL_APB1_GRP2_PERIPH_TIM17
- * @arg @ref LL_APB1_GRP2_PERIPH_DBGMCU
- *
- * (*) value not defined in all devices.
- * @retval None
-*/
-__STATIC_INLINE void LL_APB1_GRP2_ReleaseReset(uint32_t Periphs)
-{
- CLEAR_BIT(RCC->APB2RSTR, Periphs);
-}
-
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* defined(RCC) */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F0xx_LL_BUS_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|