diff options
Diffstat (limited to 'hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pcd.h')
| -rw-r--r-- | hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pcd.h | 945 |
1 files changed, 0 insertions, 945 deletions
diff --git a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pcd.h b/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pcd.h deleted file mode 100644 index 00b7047..0000000 --- a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pcd.h +++ /dev/null @@ -1,945 +0,0 @@ -/**
- ******************************************************************************
- * @file stm32f0xx_hal_pcd.h
- * @author MCD Application Team
- * @brief Header file of PCD HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef STM32F0xx_HAL_PCD_H
-#define STM32F0xx_HAL_PCD_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_ll_usb.h"
-
-#if defined (USB)
-
-/** @addtogroup STM32F0xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup PCD
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup PCD_Exported_Types PCD Exported Types
- * @{
- */
-
-/**
- * @brief PCD State structure definition
- */
-typedef enum
-{
- HAL_PCD_STATE_RESET = 0x00,
- HAL_PCD_STATE_READY = 0x01,
- HAL_PCD_STATE_ERROR = 0x02,
- HAL_PCD_STATE_BUSY = 0x03,
- HAL_PCD_STATE_TIMEOUT = 0x04
-} PCD_StateTypeDef;
-
-/* Device LPM suspend state */
-typedef enum
-{
- LPM_L0 = 0x00, /* on */
- LPM_L1 = 0x01, /* LPM L1 sleep */
- LPM_L2 = 0x02, /* suspend */
- LPM_L3 = 0x03, /* off */
-} PCD_LPM_StateTypeDef;
-
-typedef enum
-{
- PCD_LPM_L0_ACTIVE = 0x00, /* on */
- PCD_LPM_L1_ACTIVE = 0x01, /* LPM L1 sleep */
-} PCD_LPM_MsgTypeDef;
-
-typedef enum
-{
- PCD_BCD_ERROR = 0xFF,
- PCD_BCD_CONTACT_DETECTION = 0xFE,
- PCD_BCD_STD_DOWNSTREAM_PORT = 0xFD,
- PCD_BCD_CHARGING_DOWNSTREAM_PORT = 0xFC,
- PCD_BCD_DEDICATED_CHARGING_PORT = 0xFB,
- PCD_BCD_DISCOVERY_COMPLETED = 0x00,
-
-} PCD_BCD_MsgTypeDef;
-
-
-
-
-
-typedef USB_TypeDef PCD_TypeDef;
-typedef USB_CfgTypeDef PCD_InitTypeDef;
-typedef USB_EPTypeDef PCD_EPTypeDef;
-
-
-/**
- * @brief PCD Handle Structure definition
- */
-#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
-typedef struct __PCD_HandleTypeDef
-#else
-typedef struct
-#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
-{
- PCD_TypeDef *Instance; /*!< Register base address */
- PCD_InitTypeDef Init; /*!< PCD required parameters */
- __IO uint8_t USB_Address; /*!< USB Address */
- PCD_EPTypeDef IN_ep[8]; /*!< IN endpoint parameters */
- PCD_EPTypeDef OUT_ep[8]; /*!< OUT endpoint parameters */
- HAL_LockTypeDef Lock; /*!< PCD peripheral status */
- __IO PCD_StateTypeDef State; /*!< PCD communication state */
- __IO uint32_t ErrorCode; /*!< PCD Error code */
- uint32_t Setup[12]; /*!< Setup packet buffer */
- PCD_LPM_StateTypeDef LPM_State; /*!< LPM State */
- uint32_t BESL;
-
-
- uint32_t lpm_active; /*!< Enable or disable the Link Power Management .
- This parameter can be set to ENABLE or DISABLE */
-
- uint32_t battery_charging_active; /*!< Enable or disable Battery charging.
- This parameter can be set to ENABLE or DISABLE */
- void *pData; /*!< Pointer to upper stack Handler */
-
-#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
- void (* SOFCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD SOF callback */
- void (* SetupStageCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Setup Stage callback */
- void (* ResetCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Reset callback */
- void (* SuspendCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Suspend callback */
- void (* ResumeCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Resume callback */
- void (* ConnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Connect callback */
- void (* DisconnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Disconnect callback */
-
- void (* DataOutStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data OUT Stage callback */
- void (* DataInStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data IN Stage callback */
- void (* ISOOUTIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO OUT Incomplete callback */
- void (* ISOINIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO IN Incomplete callback */
- void (* BCDCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); /*!< USB OTG PCD BCD callback */
- void (* LPMCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); /*!< USB OTG PCD LPM callback */
-
- void (* MspInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp Init callback */
- void (* MspDeInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp DeInit callback */
-#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
-} PCD_HandleTypeDef;
-
-/**
- * @}
- */
-
-/* Include PCD HAL Extended module */
-#include "stm32f0xx_hal_pcd_ex.h"
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup PCD_Exported_Constants PCD Exported Constants
- * @{
- */
-
-/** @defgroup PCD_Speed PCD Speed
- * @{
- */
-#define PCD_SPEED_FULL USBD_FS_SPEED
-/**
- * @}
- */
-
-/** @defgroup PCD_PHY_Module PCD PHY Module
- * @{
- */
-#define PCD_PHY_ULPI 1U
-#define PCD_PHY_EMBEDDED 2U
-#define PCD_PHY_UTMI 3U
-/**
- * @}
- */
-
-/** @defgroup PCD_Error_Code_definition PCD Error Code definition
- * @brief PCD Error Code definition
- * @{
- */
-#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
-#define HAL_PCD_ERROR_INVALID_CALLBACK (0x00000010U) /*!< Invalid Callback error */
-#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported macros -----------------------------------------------------------*/
-/** @defgroup PCD_Exported_Macros PCD Exported Macros
- * @brief macros to handle interrupts and specific clock configurations
- * @{
- */
-
-
-#define __HAL_PCD_ENABLE(__HANDLE__) (void)USB_EnableGlobalInt ((__HANDLE__)->Instance)
-#define __HAL_PCD_DISABLE(__HANDLE__) (void)USB_DisableGlobalInt ((__HANDLE__)->Instance)
-#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
-#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) &= ~(__INTERRUPT__))
-
-#define __HAL_USB_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= USB_WAKEUP_EXTI_LINE
-#define __HAL_USB_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_WAKEUP_EXTI_LINE)
-
-
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup PCD_Exported_Functions PCD Exported Functions
- * @{
- */
-
-/* Initialization/de-initialization functions ********************************/
-/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions
- * @{
- */
-HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
-HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
-
-#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
-/** @defgroup HAL_PCD_Callback_ID_enumeration_definition HAL USB OTG PCD Callback ID enumeration definition
- * @brief HAL USB OTG PCD Callback ID enumeration definition
- * @{
- */
-typedef enum
-{
- HAL_PCD_SOF_CB_ID = 0x01, /*!< USB PCD SOF callback ID */
- HAL_PCD_SETUPSTAGE_CB_ID = 0x02, /*!< USB PCD Setup Stage callback ID */
- HAL_PCD_RESET_CB_ID = 0x03, /*!< USB PCD Reset callback ID */
- HAL_PCD_SUSPEND_CB_ID = 0x04, /*!< USB PCD Suspend callback ID */
- HAL_PCD_RESUME_CB_ID = 0x05, /*!< USB PCD Resume callback ID */
- HAL_PCD_CONNECT_CB_ID = 0x06, /*!< USB PCD Connect callback ID */
- HAL_PCD_DISCONNECT_CB_ID = 0x07, /*!< USB PCD Disconnect callback ID */
-
- HAL_PCD_MSPINIT_CB_ID = 0x08, /*!< USB PCD MspInit callback ID */
- HAL_PCD_MSPDEINIT_CB_ID = 0x09 /*!< USB PCD MspDeInit callback ID */
-
-} HAL_PCD_CallbackIDTypeDef;
-/**
- * @}
- */
-
-/** @defgroup HAL_PCD_Callback_pointer_definition HAL USB OTG PCD Callback pointer definition
- * @brief HAL USB OTG PCD Callback pointer definition
- * @{
- */
-
-typedef void (*pPCD_CallbackTypeDef)(PCD_HandleTypeDef *hpcd); /*!< pointer to a common USB OTG PCD callback function */
-typedef void (*pPCD_DataOutStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data OUT Stage callback */
-typedef void (*pPCD_DataInStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data IN Stage callback */
-typedef void (*pPCD_IsoOutIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO OUT Incomplete callback */
-typedef void (*pPCD_IsoInIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO IN Incomplete callback */
-typedef void (*pPCD_LpmCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); /*!< pointer to USB OTG PCD LPM callback */
-typedef void (*pPCD_BcdCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); /*!< pointer to USB OTG PCD BCD callback */
-
-/**
- * @}
- */
-
-HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID, pPCD_CallbackTypeDef pCallback);
-HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID);
-
-HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, pPCD_DataOutStageCallbackTypeDef pCallback);
-HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd);
-
-HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, pPCD_DataInStageCallbackTypeDef pCallback);
-HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd);
-
-HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, pPCD_IsoOutIncpltCallbackTypeDef pCallback);
-HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd);
-
-HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, pPCD_IsoInIncpltCallbackTypeDef pCallback);
-HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd);
-
-HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd, pPCD_BcdCallbackTypeDef pCallback);
-HAL_StatusTypeDef HAL_PCD_UnRegisterBcdCallback(PCD_HandleTypeDef *hpcd);
-
-HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd, pPCD_LpmCallbackTypeDef pCallback);
-HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd);
-#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
-/**
- * @}
- */
-
-/* I/O operation functions ***************************************************/
-/* Non-Blocking mode: Interrupt */
-/** @addtogroup PCD_Exported_Functions_Group2 Input and Output operation functions
- * @{
- */
-HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
-HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
-
-void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
-
-void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
-void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
-void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
-void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
-/**
- * @}
- */
-
-/* Peripheral Control functions **********************************************/
-/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions
- * @{
- */
-HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
-HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
-HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
-HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type);
-HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
-HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
-HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
-uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
-HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
-HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
-HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
-HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
-HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
-/**
- * @}
- */
-
-/* Peripheral State functions ************************************************/
-/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions
- * @{
- */
-PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Private constants ---------------------------------------------------------*/
-/** @defgroup PCD_Private_Constants PCD Private Constants
- * @{
- */
-/** @defgroup USB_EXTI_Line_Interrupt USB EXTI line interrupt
- * @{
- */
-
-
-#define USB_WAKEUP_EXTI_LINE (0x1U << 18) /*!< USB FS EXTI Line WakeUp Interrupt */
-
-
-/**
- * @}
- */
-
-/** @defgroup PCD_EP0_MPS PCD EP0 MPS
- * @{
- */
-#define PCD_EP0MPS_64 DEP0CTL_MPS_64
-#define PCD_EP0MPS_32 DEP0CTL_MPS_32
-#define PCD_EP0MPS_16 DEP0CTL_MPS_16
-#define PCD_EP0MPS_08 DEP0CTL_MPS_8
-/**
- * @}
- */
-
-/** @defgroup PCD_ENDP PCD ENDP
- * @{
- */
-#define PCD_ENDP0 0U
-#define PCD_ENDP1 1U
-#define PCD_ENDP2 2U
-#define PCD_ENDP3 3U
-#define PCD_ENDP4 4U
-#define PCD_ENDP5 5U
-#define PCD_ENDP6 6U
-#define PCD_ENDP7 7U
-/**
- * @}
- */
-
-/** @defgroup PCD_ENDP_Kind PCD Endpoint Kind
- * @{
- */
-#define PCD_SNG_BUF 0U
-#define PCD_DBL_BUF 1U
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Private macros ------------------------------------------------------------*/
-/** @defgroup PCD_Private_Macros PCD Private Macros
- * @{
- */
-
-/******************** Bit definition for USB_COUNTn_RX register *************/
-#define USB_CNTRX_NBLK_MSK (0x1FU << 10)
-#define USB_CNTRX_BLSIZE (0x1U << 15)
-
-/* SetENDPOINT */
-#define PCD_SET_ENDPOINT(USBx, bEpNum, wRegValue) (*(__IO uint16_t *)(&(USBx)->EP0R + ((bEpNum) * 2U)) = (uint16_t)(wRegValue))
-
-/* GetENDPOINT */
-#define PCD_GET_ENDPOINT(USBx, bEpNum) (*(__IO uint16_t *)(&(USBx)->EP0R + ((bEpNum) * 2U)))
-
-/* ENDPOINT transfer */
-#define USB_EP0StartXfer USB_EPStartXfer
-
-/**
- * @brief sets the type in the endpoint register(bits EP_TYPE[1:0])
- * @param USBx USB peripheral instance register address.
- * @param bEpNum Endpoint Number.
- * @param wType Endpoint Type.
- * @retval None
- */
-#define PCD_SET_EPTYPE(USBx, bEpNum, wType) (PCD_SET_ENDPOINT((USBx), (bEpNum), \
- ((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_MASK) | (wType) | USB_EP_CTR_TX | USB_EP_CTR_RX)))
-
-/**
- * @brief gets the type in the endpoint register(bits EP_TYPE[1:0])
- * @param USBx USB peripheral instance register address.
- * @param bEpNum Endpoint Number.
- * @retval Endpoint Type
- */
-#define PCD_GET_EPTYPE(USBx, bEpNum) (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_FIELD)
-
-/**
- * @brief free buffer used from the application realizing it to the line
- * toggles bit SW_BUF in the double buffered endpoint register
- * @param USBx USB device.
- * @param bEpNum, bDir
- * @retval None
- */
-#define PCD_FreeUserBuffer(USBx, bEpNum, bDir) do { \
- if ((bDir) == 0U) \
- { \
- /* OUT double buffered endpoint */ \
- PCD_TX_DTOG((USBx), (bEpNum)); \
- } \
- else if ((bDir) == 1U) \
- { \
- /* IN double buffered endpoint */ \
- PCD_RX_DTOG((USBx), (bEpNum)); \
- } \
-} while(0)
-
-/**
- * @brief sets the status for tx transfer (bits STAT_TX[1:0]).
- * @param USBx USB peripheral instance register address.
- * @param bEpNum Endpoint Number.
- * @param wState new state
- * @retval None
- */
-#define PCD_SET_EP_TX_STATUS(USBx, bEpNum, wState) do { \
- register uint16_t _wRegVal; \
- \
- _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_DTOGMASK; \
- /* toggle first bit ? */ \
- if ((USB_EPTX_DTOG1 & (wState))!= 0U) \
- { \
- _wRegVal ^= USB_EPTX_DTOG1; \
- } \
- /* toggle second bit ? */ \
- if ((USB_EPTX_DTOG2 & (wState))!= 0U) \
- { \
- _wRegVal ^= USB_EPTX_DTOG2; \
- } \
- PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \
- } while(0) /* PCD_SET_EP_TX_STATUS */
-
-/**
- * @brief sets the status for rx transfer (bits STAT_TX[1:0])
- * @param USBx USB peripheral instance register address.
- * @param bEpNum Endpoint Number.
- * @param wState new state
- * @retval None
- */
-#define PCD_SET_EP_RX_STATUS(USBx, bEpNum,wState) do { \
- register uint16_t _wRegVal; \
- \
- _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_DTOGMASK; \
- /* toggle first bit ? */ \
- if ((USB_EPRX_DTOG1 & (wState))!= 0U) \
- { \
- _wRegVal ^= USB_EPRX_DTOG1; \
- } \
- /* toggle second bit ? */ \
- if ((USB_EPRX_DTOG2 & (wState))!= 0U) \
- { \
- _wRegVal ^= USB_EPRX_DTOG2; \
- } \
- PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \
- } while(0) /* PCD_SET_EP_RX_STATUS */
-
-/**
- * @brief sets the status for rx & tx (bits STAT_TX[1:0] & STAT_RX[1:0])
- * @param USBx USB peripheral instance register address.
- * @param bEpNum Endpoint Number.
- * @param wStaterx new state.
- * @param wStatetx new state.
- * @retval None
- */
-#define PCD_SET_EP_TXRX_STATUS(USBx, bEpNum, wStaterx, wStatetx) do { \
- register uint16_t _wRegVal; \
- \
- _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (USB_EPRX_DTOGMASK | USB_EPTX_STAT); \
- /* toggle first bit ? */ \
- if ((USB_EPRX_DTOG1 & (wStaterx))!= 0U) \
- { \
- _wRegVal ^= USB_EPRX_DTOG1; \
- } \
- /* toggle second bit ? */ \
- if ((USB_EPRX_DTOG2 & (wStaterx))!= 0U) \
- { \
- _wRegVal ^= USB_EPRX_DTOG2; \
- } \
- /* toggle first bit ? */ \
- if ((USB_EPTX_DTOG1 & (wStatetx))!= 0U) \
- { \
- _wRegVal ^= USB_EPTX_DTOG1; \
- } \
- /* toggle second bit ? */ \
- if ((USB_EPTX_DTOG2 & (wStatetx))!= 0U) \
- { \
- _wRegVal ^= USB_EPTX_DTOG2; \
- } \
- \
- PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \
- } while(0) /* PCD_SET_EP_TXRX_STATUS */
-
-/**
- * @brief gets the status for tx/rx transfer (bits STAT_TX[1:0]
- * /STAT_RX[1:0])
- * @param USBx USB peripheral instance register address.
- * @param bEpNum Endpoint Number.
- * @retval status
- */
-#define PCD_GET_EP_TX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_STAT)
-#define PCD_GET_EP_RX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_STAT)
-
-/**
- * @brief sets directly the VALID tx/rx-status into the endpoint register
- * @param USBx USB peripheral instance register address.
- * @param bEpNum Endpoint Number.
- * @retval None
- */
-#define PCD_SET_EP_TX_VALID(USBx, bEpNum) (PCD_SET_EP_TX_STATUS((USBx), (bEpNum), USB_EP_TX_VALID))
-#define PCD_SET_EP_RX_VALID(USBx, bEpNum) (PCD_SET_EP_RX_STATUS((USBx), (bEpNum), USB_EP_RX_VALID))
-
-/**
- * @brief checks stall condition in an endpoint.
- * @param USBx USB peripheral instance register address.
- * @param bEpNum Endpoint Number.
- * @retval TRUE = endpoint in stall condition.
- */
-#define PCD_GET_EP_TX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_TX_STATUS((USBx), (bEpNum)) \
- == USB_EP_TX_STALL)
-#define PCD_GET_EP_RX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_RX_STATUS((USBx), (bEpNum)) \
- == USB_EP_RX_STALL)
-
-/**
- * @brief set & clear EP_KIND bit.
- * @param USBx USB peripheral instance register address.
- * @param bEpNum Endpoint Number.
- * @retval None
- */
-#define PCD_SET_EP_KIND(USBx, bEpNum) do { \
- register uint16_t _wRegVal; \
- \
- _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK; \
- \
- PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX | USB_EP_KIND)); \
- } while(0) /* PCD_SET_EP_KIND */
-
-#define PCD_CLEAR_EP_KIND(USBx, bEpNum) do { \
- register uint16_t _wRegVal; \
- \
- _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPKIND_MASK; \
- \
- PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \
- } while(0) /* PCD_CLEAR_EP_KIND */
-
-/**
- * @brief Sets/clears directly STATUS_OUT bit in the endpoint register.
- * @param USBx USB peripheral instance register address.
- * @param bEpNum Endpoint Number.
- * @retval None
- */
-#define PCD_SET_OUT_STATUS(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum))
-#define PCD_CLEAR_OUT_STATUS(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum))
-
-/**
- * @brief Sets/clears directly EP_KIND bit in the endpoint register.
- * @param USBx USB peripheral instance register address.
- * @param bEpNum Endpoint Number.
- * @retval None
- */
-#define PCD_SET_EP_DBUF(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum))
-#define PCD_CLEAR_EP_DBUF(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum))
-
-/**
- * @brief Clears bit CTR_RX / CTR_TX in the endpoint register.
- * @param USBx USB peripheral instance register address.
- * @param bEpNum Endpoint Number.
- * @retval None
- */
-#define PCD_CLEAR_RX_EP_CTR(USBx, bEpNum) do { \
- register uint16_t _wRegVal; \
- \
- _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (0x7FFFU & USB_EPREG_MASK); \
- \
- PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_TX)); \
- } while(0) /* PCD_CLEAR_RX_EP_CTR */
-
-#define PCD_CLEAR_TX_EP_CTR(USBx, bEpNum) do { \
- register uint16_t _wRegVal; \
- \
- _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (0xFF7FU & USB_EPREG_MASK); \
- \
- PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX)); \
- } while(0) /* PCD_CLEAR_TX_EP_CTR */
-
-/**
- * @brief Toggles DTOG_RX / DTOG_TX bit in the endpoint register.
- * @param USBx USB peripheral instance register address.
- * @param bEpNum Endpoint Number.
- * @retval None
- */
-#define PCD_RX_DTOG(USBx, bEpNum) do { \
- register uint16_t _wEPVal; \
- \
- _wEPVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK; \
- \
- PCD_SET_ENDPOINT((USBx), (bEpNum), (_wEPVal | USB_EP_CTR_RX | USB_EP_CTR_TX | USB_EP_DTOG_RX)); \
- } while(0) /* PCD_RX_DTOG */
-
-#define PCD_TX_DTOG(USBx, bEpNum) do { \
- register uint16_t _wEPVal; \
- \
- _wEPVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK; \
- \
- PCD_SET_ENDPOINT((USBx), (bEpNum), (_wEPVal | USB_EP_CTR_RX | USB_EP_CTR_TX | USB_EP_DTOG_TX)); \
- } while(0) /* PCD_TX_DTOG */
-/**
- * @brief Clears DTOG_RX / DTOG_TX bit in the endpoint register.
- * @param USBx USB peripheral instance register address.
- * @param bEpNum Endpoint Number.
- * @retval None
- */
-#define PCD_CLEAR_RX_DTOG(USBx, bEpNum) do { \
- register uint16_t _wRegVal; \
- \
- _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)); \
- \
- if ((_wRegVal & USB_EP_DTOG_RX) != 0U)\
- { \
- PCD_RX_DTOG((USBx), (bEpNum)); \
- } \
- } while(0) /* PCD_CLEAR_RX_DTOG */
-
-#define PCD_CLEAR_TX_DTOG(USBx, bEpNum) do { \
- register uint16_t _wRegVal; \
- \
- _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)); \
- \
- if ((_wRegVal & USB_EP_DTOG_TX) != 0U)\
- { \
- PCD_TX_DTOG((USBx), (bEpNum)); \
- } \
- } while(0) /* PCD_CLEAR_TX_DTOG */
-
-/**
- * @brief Sets address in an endpoint register.
- * @param USBx USB peripheral instance register address.
- * @param bEpNum Endpoint Number.
- * @param bAddr Address.
- * @retval None
- */
-#define PCD_SET_EP_ADDRESS(USBx, bEpNum, bAddr) do { \
- register uint16_t _wRegVal; \
- \
- _wRegVal = (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK) | (bAddr); \
- \
- PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \
- } while(0) /* PCD_SET_EP_ADDRESS */
-
-/**
- * @brief Gets address in an endpoint register.
- * @param USBx USB peripheral instance register address.
- * @param bEpNum Endpoint Number.
- * @retval None
- */
-#define PCD_GET_EP_ADDRESS(USBx, bEpNum) ((uint8_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPADDR_FIELD))
-
-#define PCD_EP_TX_CNT(USBx, bEpNum) ((uint16_t *)((((uint32_t)(USBx)->BTABLE + ((uint32_t)(bEpNum) * 8U) + 2U) * PMA_ACCESS) + ((uint32_t)(USBx) + 0x400U)))
-#define PCD_EP_RX_CNT(USBx, bEpNum) ((uint16_t *)((((uint32_t)(USBx)->BTABLE + ((uint32_t)(bEpNum) * 8U) + 6U) * PMA_ACCESS) + ((uint32_t)(USBx) + 0x400U)))
-
-/**
- * @brief sets address of the tx/rx buffer.
- * @param USBx USB peripheral instance register address.
- * @param bEpNum Endpoint Number.
- * @param wAddr address to be set (must be word aligned).
- * @retval None
- */
-#define PCD_SET_EP_TX_ADDRESS(USBx, bEpNum, wAddr) do { \
- register uint16_t *_wRegVal; \
- register uint32_t _wRegBase = (uint32_t)USBx; \
- \
- _wRegBase += (uint32_t)(USBx)->BTABLE; \
- _wRegVal = (uint16_t *)(_wRegBase + 0x400U + (((uint32_t)(bEpNum) * 8U) * PMA_ACCESS)); \
- *_wRegVal = ((wAddr) >> 1) << 1; \
-} while(0) /* PCD_SET_EP_TX_ADDRESS */
-
-#define PCD_SET_EP_RX_ADDRESS(USBx, bEpNum, wAddr) do { \
- register uint16_t *_wRegVal; \
- register uint32_t _wRegBase = (uint32_t)USBx; \
- \
- _wRegBase += (uint32_t)(USBx)->BTABLE; \
- _wRegVal = (uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 4U) * PMA_ACCESS)); \
- *_wRegVal = ((wAddr) >> 1) << 1; \
-} while(0) /* PCD_SET_EP_RX_ADDRESS */
-
-/**
- * @brief Gets address of the tx/rx buffer.
- * @param USBx USB peripheral instance register address.
- * @param bEpNum Endpoint Number.
- * @retval address of the buffer.
- */
-#define PCD_GET_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_TX_ADDRESS((USBx), (bEpNum)))
-#define PCD_GET_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_RX_ADDRESS((USBx), (bEpNum)))
-
-/**
- * @brief Sets counter of rx buffer with no. of blocks.
- * @param pdwReg Register pointer
- * @param wCount Counter.
- * @param wNBlocks no. of Blocks.
- * @retval None
- */
-#define PCD_CALC_BLK32(pdwReg, wCount, wNBlocks) do { \
- (wNBlocks) = (wCount) >> 5; \
- if (((wCount) & 0x1fU) == 0U) \
- { \
- (wNBlocks)--; \
- } \
- *(pdwReg) = (uint16_t)(((wNBlocks) << 10) | USB_CNTRX_BLSIZE); \
- } while(0) /* PCD_CALC_BLK32 */
-
-#define PCD_CALC_BLK2(pdwReg, wCount, wNBlocks) do { \
- (wNBlocks) = (wCount) >> 1; \
- if (((wCount) & 0x1U) != 0U) \
- { \
- (wNBlocks)++; \
- } \
- *(pdwReg) = (uint16_t)((wNBlocks) << 10); \
- } while(0) /* PCD_CALC_BLK2 */
-
-#define PCD_SET_EP_CNT_RX_REG(pdwReg, wCount) do { \
- uint32_t wNBlocks; \
- if ((wCount) == 0U) \
- { \
- *(pdwReg) &= (uint16_t)~USB_CNTRX_NBLK_MSK; \
- *(pdwReg) |= USB_CNTRX_BLSIZE; \
- } \
- else if((wCount) <= 62U) \
- { \
- PCD_CALC_BLK2((pdwReg), (wCount), wNBlocks); \
- } \
- else \
- { \
- PCD_CALC_BLK32((pdwReg),(wCount), wNBlocks); \
- } \
- } while(0) /* PCD_SET_EP_CNT_RX_REG */
-
-#define PCD_SET_EP_RX_DBUF0_CNT(USBx, bEpNum, wCount) do { \
- register uint32_t _wRegBase = (uint32_t)(USBx); \
- uint16_t *pdwReg; \
- \
- _wRegBase += (uint32_t)(USBx)->BTABLE; \
- pdwReg = (uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 2U) * PMA_ACCESS)); \
- PCD_SET_EP_CNT_RX_REG(pdwReg, (wCount)); \
- } while(0)
-
-/**
- * @brief sets counter for the tx/rx buffer.
- * @param USBx USB peripheral instance register address.
- * @param bEpNum Endpoint Number.
- * @param wCount Counter value.
- * @retval None
- */
-#define PCD_SET_EP_TX_CNT(USBx, bEpNum, wCount) do { \
- register uint32_t _wRegBase = (uint32_t)(USBx); \
- uint16_t *_wRegVal; \
- \
- _wRegBase += (uint32_t)(USBx)->BTABLE; \
- _wRegVal = (uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 2U) * PMA_ACCESS)); \
- *_wRegVal = (uint16_t)(wCount); \
-} while(0)
-
-#define PCD_SET_EP_RX_CNT(USBx, bEpNum, wCount) do { \
- register uint32_t _wRegBase = (uint32_t)(USBx); \
- uint16_t *_wRegVal; \
- \
- _wRegBase += (uint32_t)(USBx)->BTABLE; \
- _wRegVal = (uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 6U) * PMA_ACCESS)); \
- PCD_SET_EP_CNT_RX_REG(_wRegVal, (wCount)); \
-} while(0)
-
-/**
- * @brief gets counter of the tx buffer.
- * @param USBx USB peripheral instance register address.
- * @param bEpNum Endpoint Number.
- * @retval Counter value
- */
-#define PCD_GET_EP_TX_CNT(USBx, bEpNum) ((uint32_t)(*PCD_EP_TX_CNT((USBx), (bEpNum))) & 0x3ffU)
-#define PCD_GET_EP_RX_CNT(USBx, bEpNum) ((uint32_t)(*PCD_EP_RX_CNT((USBx), (bEpNum))) & 0x3ffU)
-
-/**
- * @brief Sets buffer 0/1 address in a double buffer endpoint.
- * @param USBx USB peripheral instance register address.
- * @param bEpNum Endpoint Number.
- * @param wBuf0Addr buffer 0 address.
- * @retval Counter value
- */
-#define PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum, wBuf0Addr) do { \
- PCD_SET_EP_TX_ADDRESS((USBx), (bEpNum), (wBuf0Addr)); \
- } while(0) /* PCD_SET_EP_DBUF0_ADDR */
-#define PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum, wBuf1Addr) do { \
- PCD_SET_EP_RX_ADDRESS((USBx), (bEpNum), (wBuf1Addr)); \
- } while(0) /* PCD_SET_EP_DBUF1_ADDR */
-
-/**
- * @brief Sets addresses in a double buffer endpoint.
- * @param USBx USB peripheral instance register address.
- * @param bEpNum Endpoint Number.
- * @param wBuf0Addr: buffer 0 address.
- * @param wBuf1Addr = buffer 1 address.
- * @retval None
- */
-#define PCD_SET_EP_DBUF_ADDR(USBx, bEpNum, wBuf0Addr, wBuf1Addr) do { \
- PCD_SET_EP_DBUF0_ADDR((USBx), (bEpNum), (wBuf0Addr)); \
- PCD_SET_EP_DBUF1_ADDR((USBx), (bEpNum), (wBuf1Addr)); \
- } while(0) /* PCD_SET_EP_DBUF_ADDR */
-
-/**
- * @brief Gets buffer 0/1 address of a double buffer endpoint.
- * @param USBx USB peripheral instance register address.
- * @param bEpNum Endpoint Number.
- * @retval None
- */
-#define PCD_GET_EP_DBUF0_ADDR(USBx, bEpNum) (PCD_GET_EP_TX_ADDRESS((USBx), (bEpNum)))
-#define PCD_GET_EP_DBUF1_ADDR(USBx, bEpNum) (PCD_GET_EP_RX_ADDRESS((USBx), (bEpNum)))
-
-/**
- * @brief Gets buffer 0/1 address of a double buffer endpoint.
- * @param USBx USB peripheral instance register address.
- * @param bEpNum Endpoint Number.
- * @param bDir endpoint dir EP_DBUF_OUT = OUT
- * EP_DBUF_IN = IN
- * @param wCount: Counter value
- * @retval None
- */
-#define PCD_SET_EP_DBUF0_CNT(USBx, bEpNum, bDir, wCount) do { \
- if ((bDir) == 0U) \
- /* OUT endpoint */ \
- { \
- PCD_SET_EP_RX_DBUF0_CNT((USBx), (bEpNum), (wCount)); \
- } \
- else \
- { \
- if ((bDir) == 1U) \
- { \
- /* IN endpoint */ \
- PCD_SET_EP_TX_CNT((USBx), (bEpNum), (wCount)); \
- } \
- } \
- } while(0) /* SetEPDblBuf0Count*/
-
-#define PCD_SET_EP_DBUF1_CNT(USBx, bEpNum, bDir, wCount) do { \
- register uint32_t _wBase = (uint32_t)(USBx); \
- uint16_t *_wEPRegVal; \
- \
- if ((bDir) == 0U) \
- { \
- /* OUT endpoint */ \
- PCD_SET_EP_RX_CNT((USBx), (bEpNum), (wCount)); \
- } \
- else \
- { \
- if ((bDir) == 1U) \
- { \
- /* IN endpoint */ \
- _wBase += (uint32_t)(USBx)->BTABLE; \
- _wEPRegVal = (uint16_t *)(_wBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 6U) * PMA_ACCESS)); \
- *_wEPRegVal = (uint16_t)(wCount); \
- } \
- } \
- } while(0) /* SetEPDblBuf1Count */
-
-#define PCD_SET_EP_DBUF_CNT(USBx, bEpNum, bDir, wCount) do { \
- PCD_SET_EP_DBUF0_CNT((USBx), (bEpNum), (bDir), (wCount)); \
- PCD_SET_EP_DBUF1_CNT((USBx), (bEpNum), (bDir), (wCount)); \
- } while(0) /* PCD_SET_EP_DBUF_CNT */
-
-/**
- * @brief Gets buffer 0/1 rx/tx counter for double buffering.
- * @param USBx USB peripheral instance register address.
- * @param bEpNum Endpoint Number.
- * @retval None
- */
-#define PCD_GET_EP_DBUF0_CNT(USBx, bEpNum) (PCD_GET_EP_TX_CNT((USBx), (bEpNum)))
-#define PCD_GET_EP_DBUF1_CNT(USBx, bEpNum) (PCD_GET_EP_RX_CNT((USBx), (bEpNum)))
-
-
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-#endif /* defined (USB) */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* STM32F0xx_HAL_PCD_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|