diff options
Diffstat (limited to 'hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h')
| -rw-r--r-- | hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h | 782 |
1 files changed, 0 insertions, 782 deletions
diff --git a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h b/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h deleted file mode 100644 index d61df7e..0000000 --- a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h +++ /dev/null @@ -1,782 +0,0 @@ -/**
- ******************************************************************************
- * @file stm32f0xx_hal_i2c.h
- * @author MCD Application Team
- * @brief Header file of I2C HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef STM32F0xx_HAL_I2C_H
-#define STM32F0xx_HAL_I2C_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_hal_def.h"
-
-/** @addtogroup STM32F0xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup I2C
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup I2C_Exported_Types I2C Exported Types
- * @{
- */
-
-/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition
- * @brief I2C Configuration Structure definition
- * @{
- */
-typedef struct
-{
- uint32_t Timing; /*!< Specifies the I2C_TIMINGR_register value.
- This parameter calculated by referring to I2C initialization
- section in Reference manual */
-
- uint32_t OwnAddress1; /*!< Specifies the first device own address.
- This parameter can be a 7-bit or 10-bit address. */
-
- uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
- This parameter can be a value of @ref I2C_ADDRESSING_MODE */
-
- uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
- This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */
-
- uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
- This parameter can be a 7-bit address. */
-
- uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing mode is selected
- This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */
-
- uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
- This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */
-
- uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
- This parameter can be a value of @ref I2C_NOSTRETCH_MODE */
-
-} I2C_InitTypeDef;
-
-/**
- * @}
- */
-
-/** @defgroup HAL_state_structure_definition HAL state structure definition
- * @brief HAL State structure definition
- * @note HAL I2C State value coding follow below described bitmap :\n
- * b7-b6 Error information\n
- * 00 : No Error\n
- * 01 : Abort (Abort user request on going)\n
- * 10 : Timeout\n
- * 11 : Error\n
- * b5 Peripheral initialization status\n
- * 0 : Reset (peripheral not initialized)\n
- * 1 : Init done (peripheral initialized and ready to use. HAL I2C Init function called)\n
- * b4 (not used)\n
- * x : Should be set to 0\n
- * b3\n
- * 0 : Ready or Busy (No Listen mode ongoing)\n
- * 1 : Listen (peripheral in Address Listen Mode)\n
- * b2 Intrinsic process state\n
- * 0 : Ready\n
- * 1 : Busy (peripheral busy with some configuration or internal operations)\n
- * b1 Rx state\n
- * 0 : Ready (no Rx operation ongoing)\n
- * 1 : Busy (Rx operation ongoing)\n
- * b0 Tx state\n
- * 0 : Ready (no Tx operation ongoing)\n
- * 1 : Busy (Tx operation ongoing)
- * @{
- */
-typedef enum
-{
- HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */
- HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */
- HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */
- HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */
- HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */
- HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */
- HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission
- process is ongoing */
- HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception
- process is ongoing */
- HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */
- HAL_I2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */
- HAL_I2C_STATE_ERROR = 0xE0U /*!< Error */
-
-} HAL_I2C_StateTypeDef;
-
-/**
- * @}
- */
-
-/** @defgroup HAL_mode_structure_definition HAL mode structure definition
- * @brief HAL Mode structure definition
- * @note HAL I2C Mode value coding follow below described bitmap :\n
- * b7 (not used)\n
- * x : Should be set to 0\n
- * b6\n
- * 0 : None\n
- * 1 : Memory (HAL I2C communication is in Memory Mode)\n
- * b5\n
- * 0 : None\n
- * 1 : Slave (HAL I2C communication is in Slave Mode)\n
- * b4\n
- * 0 : None\n
- * 1 : Master (HAL I2C communication is in Master Mode)\n
- * b3-b2-b1-b0 (not used)\n
- * xxxx : Should be set to 0000
- * @{
- */
-typedef enum
-{
- HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */
- HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */
- HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */
- HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */
-
-} HAL_I2C_ModeTypeDef;
-
-/**
- * @}
- */
-
-/** @defgroup I2C_Error_Code_definition I2C Error Code definition
- * @brief I2C Error Code definition
- * @{
- */
-#define HAL_I2C_ERROR_NONE (0x00000000U) /*!< No error */
-#define HAL_I2C_ERROR_BERR (0x00000001U) /*!< BERR error */
-#define HAL_I2C_ERROR_ARLO (0x00000002U) /*!< ARLO error */
-#define HAL_I2C_ERROR_AF (0x00000004U) /*!< ACKF error */
-#define HAL_I2C_ERROR_OVR (0x00000008U) /*!< OVR error */
-#define HAL_I2C_ERROR_DMA (0x00000010U) /*!< DMA transfer error */
-#define HAL_I2C_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */
-#define HAL_I2C_ERROR_SIZE (0x00000040U) /*!< Size Management error */
-#define HAL_I2C_ERROR_DMA_PARAM (0x00000080U) /*!< DMA Parameter Error */
-#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
-#define HAL_I2C_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */
-#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
-#define HAL_I2C_ERROR_INVALID_PARAM (0x00000200U) /*!< Invalid Parameters error */
-/**
- * @}
- */
-
-/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition
- * @brief I2C handle Structure definition
- * @{
- */
-typedef struct __I2C_HandleTypeDef
-{
- I2C_TypeDef *Instance; /*!< I2C registers base address */
-
- I2C_InitTypeDef Init; /*!< I2C communication parameters */
-
- uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */
-
- uint16_t XferSize; /*!< I2C transfer size */
-
- __IO uint16_t XferCount; /*!< I2C transfer counter */
-
- __IO uint32_t XferOptions; /*!< I2C sequantial transfer options, this parameter can
- be a value of @ref I2C_XFEROPTIONS */
-
- __IO uint32_t PreviousState; /*!< I2C communication Previous state */
-
- HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); /*!< I2C transfer IRQ handler function pointer */
-
- DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */
-
- DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */
-
- HAL_LockTypeDef Lock; /*!< I2C locking object */
-
- __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */
-
- __IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */
-
- __IO uint32_t ErrorCode; /*!< I2C Error code */
-
- __IO uint32_t AddrEventCount; /*!< I2C Address Event counter */
-
-#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
- void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Tx Transfer completed callback */
- void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Rx Transfer completed callback */
- void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Tx Transfer completed callback */
- void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Rx Transfer completed callback */
- void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Listen Complete callback */
- void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Tx Transfer completed callback */
- void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Rx Transfer completed callback */
- void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Error callback */
- void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Abort callback */
-
- void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< I2C Slave Address Match callback */
-
- void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp Init callback */
- void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp DeInit callback */
-
-#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
-} I2C_HandleTypeDef;
-
-#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
-/**
- * @brief HAL I2C Callback ID enumeration definition
- */
-typedef enum
-{
- HAL_I2C_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< I2C Master Tx Transfer completed callback ID */
- HAL_I2C_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< I2C Master Rx Transfer completed callback ID */
- HAL_I2C_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< I2C Slave Tx Transfer completed callback ID */
- HAL_I2C_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< I2C Slave Rx Transfer completed callback ID */
- HAL_I2C_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< I2C Listen Complete callback ID */
- HAL_I2C_MEM_TX_COMPLETE_CB_ID = 0x05U, /*!< I2C Memory Tx Transfer callback ID */
- HAL_I2C_MEM_RX_COMPLETE_CB_ID = 0x06U, /*!< I2C Memory Rx Transfer completed callback ID */
- HAL_I2C_ERROR_CB_ID = 0x07U, /*!< I2C Error callback ID */
- HAL_I2C_ABORT_CB_ID = 0x08U, /*!< I2C Abort callback ID */
-
- HAL_I2C_MSPINIT_CB_ID = 0x09U, /*!< I2C Msp Init callback ID */
- HAL_I2C_MSPDEINIT_CB_ID = 0x0AU /*!< I2C Msp DeInit callback ID */
-
-} HAL_I2C_CallbackIDTypeDef;
-
-/**
- * @brief HAL I2C Callback pointer definition
- */
-typedef void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c); /*!< pointer to an I2C callback function */
-typedef void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< pointer to an I2C Address Match callback function */
-
-#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
-/**
- * @}
- */
-
-/**
- * @}
- */
-/* Exported constants --------------------------------------------------------*/
-
-/** @defgroup I2C_Exported_Constants I2C Exported Constants
- * @{
- */
-
-/** @defgroup I2C_XFEROPTIONS I2C Sequential Transfer Options
- * @{
- */
-#define I2C_FIRST_FRAME ((uint32_t)I2C_SOFTEND_MODE)
-#define I2C_FIRST_AND_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE))
-#define I2C_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE))
-#define I2C_FIRST_AND_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE)
-#define I2C_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE)
-#define I2C_LAST_FRAME_NO_STOP ((uint32_t)I2C_SOFTEND_MODE)
-
-/* List of XferOptions in usage of :
- * 1- Restart condition in all use cases (direction change or not)
- */
-#define I2C_OTHER_FRAME (0x000000AAU)
-#define I2C_OTHER_AND_LAST_FRAME (0x0000AA00U)
-/**
- * @}
- */
-
-/** @defgroup I2C_ADDRESSING_MODE I2C Addressing Mode
- * @{
- */
-#define I2C_ADDRESSINGMODE_7BIT (0x00000001U)
-#define I2C_ADDRESSINGMODE_10BIT (0x00000002U)
-/**
- * @}
- */
-
-/** @defgroup I2C_DUAL_ADDRESSING_MODE I2C Dual Addressing Mode
- * @{
- */
-#define I2C_DUALADDRESS_DISABLE (0x00000000U)
-#define I2C_DUALADDRESS_ENABLE I2C_OAR2_OA2EN
-/**
- * @}
- */
-
-/** @defgroup I2C_OWN_ADDRESS2_MASKS I2C Own Address2 Masks
- * @{
- */
-#define I2C_OA2_NOMASK ((uint8_t)0x00U)
-#define I2C_OA2_MASK01 ((uint8_t)0x01U)
-#define I2C_OA2_MASK02 ((uint8_t)0x02U)
-#define I2C_OA2_MASK03 ((uint8_t)0x03U)
-#define I2C_OA2_MASK04 ((uint8_t)0x04U)
-#define I2C_OA2_MASK05 ((uint8_t)0x05U)
-#define I2C_OA2_MASK06 ((uint8_t)0x06U)
-#define I2C_OA2_MASK07 ((uint8_t)0x07U)
-/**
- * @}
- */
-
-/** @defgroup I2C_GENERAL_CALL_ADDRESSING_MODE I2C General Call Addressing Mode
- * @{
- */
-#define I2C_GENERALCALL_DISABLE (0x00000000U)
-#define I2C_GENERALCALL_ENABLE I2C_CR1_GCEN
-/**
- * @}
- */
-
-/** @defgroup I2C_NOSTRETCH_MODE I2C No-Stretch Mode
- * @{
- */
-#define I2C_NOSTRETCH_DISABLE (0x00000000U)
-#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH
-/**
- * @}
- */
-
-/** @defgroup I2C_MEMORY_ADDRESS_SIZE I2C Memory Address Size
- * @{
- */
-#define I2C_MEMADD_SIZE_8BIT (0x00000001U)
-#define I2C_MEMADD_SIZE_16BIT (0x00000002U)
-/**
- * @}
- */
-
-/** @defgroup I2C_XFERDIRECTION I2C Transfer Direction Master Point of View
- * @{
- */
-#define I2C_DIRECTION_TRANSMIT (0x00000000U)
-#define I2C_DIRECTION_RECEIVE (0x00000001U)
-/**
- * @}
- */
-
-/** @defgroup I2C_RELOAD_END_MODE I2C Reload End Mode
- * @{
- */
-#define I2C_RELOAD_MODE I2C_CR2_RELOAD
-#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND
-#define I2C_SOFTEND_MODE (0x00000000U)
-/**
- * @}
- */
-
-/** @defgroup I2C_START_STOP_MODE I2C Start or Stop Mode
- * @{
- */
-#define I2C_NO_STARTSTOP (0x00000000U)
-#define I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP)
-#define I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN)
-#define I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START)
-/**
- * @}
- */
-
-/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition
- * @brief I2C Interrupt definition
- * Elements values convention: 0xXXXXXXXX
- * - XXXXXXXX : Interrupt control mask
- * @{
- */
-#define I2C_IT_ERRI I2C_CR1_ERRIE
-#define I2C_IT_TCI I2C_CR1_TCIE
-#define I2C_IT_STOPI I2C_CR1_STOPIE
-#define I2C_IT_NACKI I2C_CR1_NACKIE
-#define I2C_IT_ADDRI I2C_CR1_ADDRIE
-#define I2C_IT_RXI I2C_CR1_RXIE
-#define I2C_IT_TXI I2C_CR1_TXIE
-/**
- * @}
- */
-
-/** @defgroup I2C_Flag_definition I2C Flag definition
- * @{
- */
-#define I2C_FLAG_TXE I2C_ISR_TXE
-#define I2C_FLAG_TXIS I2C_ISR_TXIS
-#define I2C_FLAG_RXNE I2C_ISR_RXNE
-#define I2C_FLAG_ADDR I2C_ISR_ADDR
-#define I2C_FLAG_AF I2C_ISR_NACKF
-#define I2C_FLAG_STOPF I2C_ISR_STOPF
-#define I2C_FLAG_TC I2C_ISR_TC
-#define I2C_FLAG_TCR I2C_ISR_TCR
-#define I2C_FLAG_BERR I2C_ISR_BERR
-#define I2C_FLAG_ARLO I2C_ISR_ARLO
-#define I2C_FLAG_OVR I2C_ISR_OVR
-#define I2C_FLAG_PECERR I2C_ISR_PECERR
-#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT
-#define I2C_FLAG_ALERT I2C_ISR_ALERT
-#define I2C_FLAG_BUSY I2C_ISR_BUSY
-#define I2C_FLAG_DIR I2C_ISR_DIR
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported macros -----------------------------------------------------------*/
-
-/** @defgroup I2C_Exported_Macros I2C Exported Macros
- * @{
- */
-
-/** @brief Reset I2C handle state.
- * @param __HANDLE__ specifies the I2C Handle.
- * @retval None
- */
-#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
-#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) do{ \
- (__HANDLE__)->State = HAL_I2C_STATE_RESET; \
- (__HANDLE__)->MspInitCallback = NULL; \
- (__HANDLE__)->MspDeInitCallback = NULL; \
- } while(0)
-#else
-#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
-#endif
-
-/** @brief Enable the specified I2C interrupt.
- * @param __HANDLE__ specifies the I2C Handle.
- * @param __INTERRUPT__ specifies the interrupt source to enable.
- * This parameter can be one of the following values:
- * @arg @ref I2C_IT_ERRI Errors interrupt enable
- * @arg @ref I2C_IT_TCI Transfer complete interrupt enable
- * @arg @ref I2C_IT_STOPI STOP detection interrupt enable
- * @arg @ref I2C_IT_NACKI NACK received interrupt enable
- * @arg @ref I2C_IT_ADDRI Address match interrupt enable
- * @arg @ref I2C_IT_RXI RX interrupt enable
- * @arg @ref I2C_IT_TXI TX interrupt enable
- *
- * @retval None
- */
-#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
-
-/** @brief Disable the specified I2C interrupt.
- * @param __HANDLE__ specifies the I2C Handle.
- * @param __INTERRUPT__ specifies the interrupt source to disable.
- * This parameter can be one of the following values:
- * @arg @ref I2C_IT_ERRI Errors interrupt enable
- * @arg @ref I2C_IT_TCI Transfer complete interrupt enable
- * @arg @ref I2C_IT_STOPI STOP detection interrupt enable
- * @arg @ref I2C_IT_NACKI NACK received interrupt enable
- * @arg @ref I2C_IT_ADDRI Address match interrupt enable
- * @arg @ref I2C_IT_RXI RX interrupt enable
- * @arg @ref I2C_IT_TXI TX interrupt enable
- *
- * @retval None
- */
-#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
-
-/** @brief Check whether the specified I2C interrupt source is enabled or not.
- * @param __HANDLE__ specifies the I2C Handle.
- * @param __INTERRUPT__ specifies the I2C interrupt source to check.
- * This parameter can be one of the following values:
- * @arg @ref I2C_IT_ERRI Errors interrupt enable
- * @arg @ref I2C_IT_TCI Transfer complete interrupt enable
- * @arg @ref I2C_IT_STOPI STOP detection interrupt enable
- * @arg @ref I2C_IT_NACKI NACK received interrupt enable
- * @arg @ref I2C_IT_ADDRI Address match interrupt enable
- * @arg @ref I2C_IT_RXI RX interrupt enable
- * @arg @ref I2C_IT_TXI TX interrupt enable
- *
- * @retval The new state of __INTERRUPT__ (SET or RESET).
- */
-#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
-
-/** @brief Check whether the specified I2C flag is set or not.
- * @param __HANDLE__ specifies the I2C Handle.
- * @param __FLAG__ specifies the flag to check.
- * This parameter can be one of the following values:
- * @arg @ref I2C_FLAG_TXE Transmit data register empty
- * @arg @ref I2C_FLAG_TXIS Transmit interrupt status
- * @arg @ref I2C_FLAG_RXNE Receive data register not empty
- * @arg @ref I2C_FLAG_ADDR Address matched (slave mode)
- * @arg @ref I2C_FLAG_AF Acknowledge failure received flag
- * @arg @ref I2C_FLAG_STOPF STOP detection flag
- * @arg @ref I2C_FLAG_TC Transfer complete (master mode)
- * @arg @ref I2C_FLAG_TCR Transfer complete reload
- * @arg @ref I2C_FLAG_BERR Bus error
- * @arg @ref I2C_FLAG_ARLO Arbitration lost
- * @arg @ref I2C_FLAG_OVR Overrun/Underrun
- * @arg @ref I2C_FLAG_PECERR PEC error in reception
- * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag
- * @arg @ref I2C_FLAG_ALERT SMBus alert
- * @arg @ref I2C_FLAG_BUSY Bus busy
- * @arg @ref I2C_FLAG_DIR Transfer direction (slave mode)
- *
- * @retval The new state of __FLAG__ (SET or RESET).
- */
-#define I2C_FLAG_MASK (0x0001FFFFU)
-#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__)) ? SET : RESET)
-
-/** @brief Clear the I2C pending flags which are cleared by writing 1 in a specific bit.
- * @param __HANDLE__ specifies the I2C Handle.
- * @param __FLAG__ specifies the flag to clear.
- * This parameter can be any combination of the following values:
- * @arg @ref I2C_FLAG_TXE Transmit data register empty
- * @arg @ref I2C_FLAG_ADDR Address matched (slave mode)
- * @arg @ref I2C_FLAG_AF Acknowledge failure received flag
- * @arg @ref I2C_FLAG_STOPF STOP detection flag
- * @arg @ref I2C_FLAG_BERR Bus error
- * @arg @ref I2C_FLAG_ARLO Arbitration lost
- * @arg @ref I2C_FLAG_OVR Overrun/Underrun
- * @arg @ref I2C_FLAG_PECERR PEC error in reception
- * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag
- * @arg @ref I2C_FLAG_ALERT SMBus alert
- *
- * @retval None
- */
-#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? ((__HANDLE__)->Instance->ISR |= (__FLAG__)) \
- : ((__HANDLE__)->Instance->ICR = (__FLAG__)))
-
-/** @brief Enable the specified I2C peripheral.
- * @param __HANDLE__ specifies the I2C Handle.
- * @retval None
- */
-#define __HAL_I2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
-
-/** @brief Disable the specified I2C peripheral.
- * @param __HANDLE__ specifies the I2C Handle.
- * @retval None
- */
-#define __HAL_I2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
-
-/** @brief Generate a Non-Acknowledge I2C peripheral in Slave mode.
- * @param __HANDLE__ specifies the I2C Handle.
- * @retval None
- */
-#define __HAL_I2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK))
-/**
- * @}
- */
-
-/* Include I2C HAL Extended module */
-#include "stm32f0xx_hal_i2c_ex.h"
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup I2C_Exported_Functions
- * @{
- */
-
-/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
- * @{
- */
-/* Initialization and de-initialization functions******************************/
-HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);
-HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c);
-void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
-void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
-
-/* Callbacks Register/UnRegister functions ***********************************/
-#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
-HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, pI2C_CallbackTypeDef pCallback);
-HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID);
-
-HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback);
-HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c);
-#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
-/**
- * @}
- */
-
-/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions
- * @{
- */
-/* IO operation functions ****************************************************/
-/******* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
-
-/******* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
-
-HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
-HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
-HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
-HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
-HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c);
-HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c);
-HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress);
-
-/******* Non-Blocking mode: DMA */
-HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
-
-HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
-HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
-HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
-HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
-/**
- * @}
- */
-
-/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
- * @{
- */
-/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
-void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
-void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
-void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);
-void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);
-void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);
-void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);
-void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);
-void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c);
-void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);
-void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);
-void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
-void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c);
-/**
- * @}
- */
-
-/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions
- * @{
- */
-/* Peripheral State, Mode and Error functions *********************************/
-HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);
-HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c);
-uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Private constants ---------------------------------------------------------*/
-/** @defgroup I2C_Private_Constants I2C Private Constants
- * @{
- */
-
-/**
- * @}
- */
-
-/* Private macros ------------------------------------------------------------*/
-/** @defgroup I2C_Private_Macro I2C Private Macros
- * @{
- */
-
-#define IS_I2C_ADDRESSING_MODE(MODE) (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \
- ((MODE) == I2C_ADDRESSINGMODE_10BIT))
-
-#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \
- ((ADDRESS) == I2C_DUALADDRESS_ENABLE))
-
-#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NOMASK) || \
- ((MASK) == I2C_OA2_MASK01) || \
- ((MASK) == I2C_OA2_MASK02) || \
- ((MASK) == I2C_OA2_MASK03) || \
- ((MASK) == I2C_OA2_MASK04) || \
- ((MASK) == I2C_OA2_MASK05) || \
- ((MASK) == I2C_OA2_MASK06) || \
- ((MASK) == I2C_OA2_MASK07))
-
-#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \
- ((CALL) == I2C_GENERALCALL_ENABLE))
-
-#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \
- ((STRETCH) == I2C_NOSTRETCH_ENABLE))
-
-#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \
- ((SIZE) == I2C_MEMADD_SIZE_16BIT))
-
-#define IS_TRANSFER_MODE(MODE) (((MODE) == I2C_RELOAD_MODE) || \
- ((MODE) == I2C_AUTOEND_MODE) || \
- ((MODE) == I2C_SOFTEND_MODE))
-
-#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == I2C_GENERATE_STOP) || \
- ((REQUEST) == I2C_GENERATE_START_READ) || \
- ((REQUEST) == I2C_GENERATE_START_WRITE) || \
- ((REQUEST) == I2C_NO_STARTSTOP))
-
-#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \
- ((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \
- ((REQUEST) == I2C_NEXT_FRAME) || \
- ((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \
- ((REQUEST) == I2C_LAST_FRAME) || \
- ((REQUEST) == I2C_LAST_FRAME_NO_STOP) || \
- IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST))
-
-#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME) || \
- ((REQUEST) == I2C_OTHER_AND_LAST_FRAME))
-
-#define I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN)))
-
-#define I2C_GET_ADDR_MATCH(__HANDLE__) ((uint16_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 16U))
-#define I2C_GET_DIR(__HANDLE__) ((uint8_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16U))
-#define I2C_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND)
-#define I2C_GET_OWN_ADDRESS1(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR1 & I2C_OAR1_OA1))
-#define I2C_GET_OWN_ADDRESS2(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR2 & I2C_OAR2_OA2))
-
-#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU)
-#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU)
-
-#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00U))) >> 8U)))
-#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU))))
-
-#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \
- (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN)))
-
-#define I2C_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET)
-#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET)
-/**
- * @}
- */
-
-/* Private Functions ---------------------------------------------------------*/
-/** @defgroup I2C_Private_Functions I2C Private Functions
- * @{
- */
-/* Private functions are defined in stm32f0xx_hal_i2c.c file */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif /* STM32F0xx_HAL_I2C_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|