16 files changed, 4524 insertions, 0 deletions
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030x6.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030x6.s
new file mode 100644
index 0000000..727c24d
--- /dev/null
+++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030x6.s
@@ -0,0 +1,258 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f030x6.s
+  * @author    MCD Application Team
+  * @brief     STM32F030x4/STM32F030x6 devices vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M0 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m0
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+  ldr   r0, =_estack
+  mov   sp, r0          /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
+
+LoopCopyDataInit:
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
+/* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
+FillZerobss:
+  str  r3, [r2]
+  adds r2, r2, #4
+
+LoopFillZerobss:
+  cmp r2, r4
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+  bl  SystemInit
+/* Call static constructors */
+  bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+
+LoopForever:
+    b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+   .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  0
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  .word  WWDG_IRQHandler                   /* Window WatchDog              */
+  .word  0                                 /* Reserved                     */
+  .word  RTC_IRQHandler                    /* RTC through the EXTI line    */
+  .word  FLASH_IRQHandler                  /* FLASH                        */
+  .word  RCC_IRQHandler                    /* RCC                          */
+  .word  EXTI0_1_IRQHandler                /* EXTI Line 0 and 1            */
+  .word  EXTI2_3_IRQHandler                /* EXTI Line 2 and 3            */
+  .word  EXTI4_15_IRQHandler               /* EXTI Line 4 to 15            */
+  .word  0                                 /* Reserved                     */
+  .word  DMA1_Channel1_IRQHandler          /* DMA1 Channel 1               */
+  .word  DMA1_Channel2_3_IRQHandler        /* DMA1 Channel 2 and Channel 3 */
+  .word  DMA1_Channel4_5_IRQHandler        /* DMA1 Channel 4 and Channel 5 */
+  .word  ADC1_IRQHandler                   /* ADC1                         */
+  .word  TIM1_BRK_UP_TRG_COM_IRQHandler    /* TIM1 Break, Update, Trigger and Commutation */
+  .word  TIM1_CC_IRQHandler                /* TIM1 Capture Compare         */
+  .word  0                                 /* Reserved                     */
+  .word  TIM3_IRQHandler                   /* TIM3                         */
+  .word  0                                 /* Reserved                     */
+  .word  0                                 /* Reserved                     */
+  .word  TIM14_IRQHandler                  /* TIM14                        */
+  .word  0                                 /* Reserved                     */
+  .word  TIM16_IRQHandler                  /* TIM16                        */
+  .word  TIM17_IRQHandler                  /* TIM17                        */
+  .word  I2C1_IRQHandler                   /* I2C1                         */
+  .word  0                                 /* Reserved                     */
+  .word  SPI1_IRQHandler                   /* SPI1                         */
+  .word  0                                 /* Reserved                     */
+  .word  USART1_IRQHandler                 /* USART1                       */
+  .word  0                                 /* Reserved                     */
+  .word  0                                 /* Reserved                     */
+  .word  0                                 /* Reserved                     */
+  .word  0                                 /* Reserved                     */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak      NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak      HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak      SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak      PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak      SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak      WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak      RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak      FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak      RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak      EXTI0_1_IRQHandler
+  .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+  .weak      EXTI2_3_IRQHandler
+  .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+  .weak      EXTI4_15_IRQHandler
+  .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel2_3_IRQHandler
+  .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel4_5_IRQHandler
+  .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+  .weak      ADC1_IRQHandler
+  .thumb_set ADC1_IRQHandler,Default_Handler
+
+  .weak      TIM1_BRK_UP_TRG_COM_IRQHandler
+  .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+  .weak      TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak      TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak      TIM14_IRQHandler
+  .thumb_set TIM14_IRQHandler,Default_Handler
+
+  .weak      TIM16_IRQHandler
+  .thumb_set TIM16_IRQHandler,Default_Handler
+
+  .weak      TIM17_IRQHandler
+  .thumb_set TIM17_IRQHandler,Default_Handler
+
+  .weak      I2C1_IRQHandler
+  .thumb_set I2C1_IRQHandler,Default_Handler
+
+  .weak      SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak      USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030x8.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030x8.s
new file mode 100644
index 0000000..ff3496e
--- /dev/null
+++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030x8.s
@@ -0,0 +1,273 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f030x8.s
+  * @author    MCD Application Team
+  * @brief     STM32F030x8 devices vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M0 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m0
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+  ldr   r0, =_estack
+  mov   sp, r0          /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
+
+LoopCopyDataInit:
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
+/* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
+FillZerobss:
+  str  r3, [r2]
+  adds r2, r2, #4
+
+LoopFillZerobss:
+  cmp r2, r4
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+  bl  SystemInit
+/* Call static constructors */
+  bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+
+LoopForever:
+    b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+   .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  0
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  .word  WWDG_IRQHandler                   /* Window WatchDog              */
+  .word  0                                 /* Reserved                     */
+  .word  RTC_IRQHandler                    /* RTC through the EXTI line    */
+  .word  FLASH_IRQHandler                  /* FLASH                        */
+  .word  RCC_IRQHandler                    /* RCC                          */
+  .word  EXTI0_1_IRQHandler                /* EXTI Line 0 and 1            */
+  .word  EXTI2_3_IRQHandler                /* EXTI Line 2 and 3            */
+  .word  EXTI4_15_IRQHandler               /* EXTI Line 4 to 15            */
+  .word  0                                 /* Reserved                     */
+  .word  DMA1_Channel1_IRQHandler          /* DMA1 Channel 1               */
+  .word  DMA1_Channel2_3_IRQHandler        /* DMA1 Channel 2 and Channel 3 */
+  .word  DMA1_Channel4_5_IRQHandler        /* DMA1 Channel 4 and Channel 5 */
+  .word  ADC1_IRQHandler                   /* ADC1                         */
+  .word  TIM1_BRK_UP_TRG_COM_IRQHandler    /* TIM1 Break, Update, Trigger and Commutation */
+  .word  TIM1_CC_IRQHandler                /* TIM1 Capture Compare         */
+  .word  0                                 /* Reserved                     */
+  .word  TIM3_IRQHandler                   /* TIM3                         */
+  .word  TIM6_IRQHandler                   /* TIM6                         */
+  .word  0                                 /* Reserved                     */
+  .word  TIM14_IRQHandler                  /* TIM14                        */
+  .word  TIM15_IRQHandler                  /* TIM15                        */
+  .word  TIM16_IRQHandler                  /* TIM16                        */
+  .word  TIM17_IRQHandler                  /* TIM17                        */
+  .word  I2C1_IRQHandler                   /* I2C1                         */
+  .word  I2C2_IRQHandler                   /* I2C2                         */
+  .word  SPI1_IRQHandler                   /* SPI1                         */
+  .word  SPI2_IRQHandler                   /* SPI2                         */
+  .word  USART1_IRQHandler                 /* USART1                       */
+  .word  USART2_IRQHandler                 /* USART2                       */
+  .word  0                                 /* Reserved                     */
+  .word  0                                 /* Reserved                     */
+  .word  0                                 /* Reserved                     */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak      NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak      HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak      SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak      PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak      SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak      WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak      RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak      FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak      RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak      EXTI0_1_IRQHandler
+  .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+  .weak      EXTI2_3_IRQHandler
+  .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+  .weak      EXTI4_15_IRQHandler
+  .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel2_3_IRQHandler
+  .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel4_5_IRQHandler
+  .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+  .weak      ADC1_IRQHandler
+  .thumb_set ADC1_IRQHandler,Default_Handler
+
+  .weak      TIM1_BRK_UP_TRG_COM_IRQHandler
+  .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+  .weak      TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak      TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak      TIM6_IRQHandler
+  .thumb_set TIM6_IRQHandler,Default_Handler
+
+  .weak      TIM14_IRQHandler
+  .thumb_set TIM14_IRQHandler,Default_Handler
+
+  .weak      TIM15_IRQHandler
+  .thumb_set TIM15_IRQHandler,Default_Handler
+
+  .weak      TIM16_IRQHandler
+  .thumb_set TIM16_IRQHandler,Default_Handler
+
+  .weak      TIM17_IRQHandler
+  .thumb_set TIM17_IRQHandler,Default_Handler
+
+  .weak      I2C1_IRQHandler
+  .thumb_set I2C1_IRQHandler,Default_Handler
+
+  .weak      I2C2_IRQHandler
+  .thumb_set I2C2_IRQHandler,Default_Handler
+
+  .weak      SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak      SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak      USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak      USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030xc.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030xc.s
new file mode 100644
index 0000000..43b492d
--- /dev/null
+++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030xc.s
@@ -0,0 +1,278 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f030xc.s
+  * @author    MCD Application Team
+  * @brief     STM32F030xc/STM32F030xb devices vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M0 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m0
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+  ldr   r0, =_estack
+  mov   sp, r0          /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
+
+LoopCopyDataInit:
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
+/* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
+FillZerobss:
+  str  r3, [r2]
+  adds r2, r2, #4
+
+LoopFillZerobss:
+  cmp r2, r4
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+  bl  SystemInit
+/* Call static constructors */
+  bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+
+LoopForever:
+    b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+   .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  0
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  .word  WWDG_IRQHandler                   /* Window WatchDog              */
+  .word  0                                 /* Reserved                     */
+  .word  RTC_IRQHandler                    /* RTC through the EXTI line    */
+  .word  FLASH_IRQHandler                  /* FLASH                        */
+  .word  RCC_IRQHandler                    /* RCC                          */
+  .word  EXTI0_1_IRQHandler                /* EXTI Line 0 and 1            */
+  .word  EXTI2_3_IRQHandler                /* EXTI Line 2 and 3            */
+  .word  EXTI4_15_IRQHandler               /* EXTI Line 4 to 15            */
+  .word  0                                 /* Reserved                     */
+  .word  DMA1_Channel1_IRQHandler          /* DMA1 Channel 1               */
+  .word  DMA1_Channel2_3_IRQHandler        /* DMA1 Channel 2 and Channel 3 */
+  .word  DMA1_Channel4_5_IRQHandler        /* DMA1 Channel 4 and Channel 5 */
+  .word  ADC1_IRQHandler                   /* ADC1                         */
+  .word  TIM1_BRK_UP_TRG_COM_IRQHandler    /* TIM1 Break, Update, Trigger and Commutation */
+  .word  TIM1_CC_IRQHandler                /* TIM1 Capture Compare         */
+  .word  0                                 /* Reserved                     */
+  .word  TIM3_IRQHandler                   /* TIM3                         */
+  .word  TIM6_IRQHandler                   /* TIM6                         */
+  .word  TIM7_IRQHandler                   /* TIM7                         */
+  .word  TIM14_IRQHandler                  /* TIM14                        */
+  .word  TIM15_IRQHandler                  /* TIM15                        */
+  .word  TIM16_IRQHandler                  /* TIM16                        */
+  .word  TIM17_IRQHandler                  /* TIM17                        */
+  .word  I2C1_IRQHandler                   /* I2C1                         */
+  .word  I2C2_IRQHandler                   /* I2C2                         */
+  .word  SPI1_IRQHandler                   /* SPI1                         */
+  .word  SPI2_IRQHandler                   /* SPI2                         */
+  .word  USART1_IRQHandler                 /* USART1                       */
+  .word  USART2_IRQHandler                 /* USART2                       */
+  .word  USART3_6_IRQHandler               /* USART3, USART4, USART5, USART6 */
+  .word  0                                 /* Reserved                     */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak      NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak      HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak      SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak      PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak      SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak      WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak      RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak      FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak      RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak      EXTI0_1_IRQHandler
+  .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+  .weak      EXTI2_3_IRQHandler
+  .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+  .weak      EXTI4_15_IRQHandler
+  .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel2_3_IRQHandler
+  .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel4_5_IRQHandler
+  .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+  .weak      ADC1_IRQHandler
+  .thumb_set ADC1_IRQHandler,Default_Handler
+
+  .weak      TIM1_BRK_UP_TRG_COM_IRQHandler
+  .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+  .weak      TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak      TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak      TIM6_IRQHandler
+  .thumb_set TIM6_IRQHandler,Default_Handler
+
+  .weak      TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler
+
+  .weak      TIM14_IRQHandler
+  .thumb_set TIM14_IRQHandler,Default_Handler
+
+  .weak      TIM15_IRQHandler
+  .thumb_set TIM15_IRQHandler,Default_Handler
+
+  .weak      TIM16_IRQHandler
+  .thumb_set TIM16_IRQHandler,Default_Handler
+
+  .weak      TIM17_IRQHandler
+  .thumb_set TIM17_IRQHandler,Default_Handler
+
+  .weak      I2C1_IRQHandler
+  .thumb_set I2C1_IRQHandler,Default_Handler
+
+  .weak      I2C2_IRQHandler
+  .thumb_set I2C2_IRQHandler,Default_Handler
+
+  .weak      SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak      SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak      USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak      USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak      USART3_6_IRQHandler
+  .thumb_set USART3_6_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f031x6.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f031x6.s
new file mode 100644
index 0000000..3d990f9
--- /dev/null
+++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f031x6.s
@@ -0,0 +1,264 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f031x6.s
+  * @author    MCD Application Team
+  * @brief     STM32F031x4/STM32F031x6 devices vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M0 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m0
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+  ldr   r0, =_estack
+  mov   sp, r0          /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
+
+LoopCopyDataInit:
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
+/* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
+FillZerobss:
+  str  r3, [r2]
+  adds r2, r2, #4
+
+LoopFillZerobss:
+  cmp r2, r4
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+  bl  SystemInit
+/* Call static constructors */
+  bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+
+LoopForever:
+    b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+   .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  0
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  .word  WWDG_IRQHandler                   /* Window WatchDog              */
+  .word  PVD_IRQHandler                    /* PVD through EXTI Line detect */
+  .word  RTC_IRQHandler                    /* RTC through the EXTI line    */
+  .word  FLASH_IRQHandler                  /* FLASH                        */
+  .word  RCC_IRQHandler                    /* RCC                          */
+  .word  EXTI0_1_IRQHandler                /* EXTI Line 0 and 1            */
+  .word  EXTI2_3_IRQHandler                /* EXTI Line 2 and 3            */
+  .word  EXTI4_15_IRQHandler               /* EXTI Line 4 to 15            */
+  .word  0                                 /* Reserved                     */
+  .word  DMA1_Channel1_IRQHandler          /* DMA1 Channel 1               */
+  .word  DMA1_Channel2_3_IRQHandler        /* DMA1 Channel 2 and Channel 3 */
+  .word  DMA1_Channel4_5_IRQHandler        /* DMA1 Channel 4 and Channel 5 */
+  .word  ADC1_IRQHandler                   /* ADC1                         */
+  .word  TIM1_BRK_UP_TRG_COM_IRQHandler    /* TIM1 Break, Update, Trigger and Commutation */
+  .word  TIM1_CC_IRQHandler                /* TIM1 Capture Compare         */
+  .word  TIM2_IRQHandler                   /* TIM2                         */
+  .word  TIM3_IRQHandler                   /* TIM3                         */
+  .word  0                                 /* Reserved                     */
+  .word  0                                 /* Reserved                     */
+  .word  TIM14_IRQHandler                  /* TIM14                        */
+  .word  0                                 /* Reserved                     */
+  .word  TIM16_IRQHandler                  /* TIM16                        */
+  .word  TIM17_IRQHandler                  /* TIM17                        */
+  .word  I2C1_IRQHandler                   /* I2C1                         */
+  .word  0                                 /* Reserved                     */
+  .word  SPI1_IRQHandler                   /* SPI1                         */
+  .word  0                                 /* Reserved                     */
+  .word  USART1_IRQHandler                 /* USART1                       */
+  .word  0                                 /* Reserved                     */
+  .word  0                                 /* Reserved                     */
+  .word  0                                 /* Reserved                     */
+  .word  0                                 /* Reserved                     */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak      NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak      HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak      SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak      PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak      SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak      WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak      PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak      RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak      FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak      RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak      EXTI0_1_IRQHandler
+  .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+  .weak      EXTI2_3_IRQHandler
+  .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+  .weak      EXTI4_15_IRQHandler
+  .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel2_3_IRQHandler
+  .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel4_5_IRQHandler
+  .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+  .weak      ADC1_IRQHandler
+  .thumb_set ADC1_IRQHandler,Default_Handler
+
+  .weak      TIM1_BRK_UP_TRG_COM_IRQHandler
+  .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+  .weak      TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak      TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak      TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak      TIM14_IRQHandler
+  .thumb_set TIM14_IRQHandler,Default_Handler
+
+  .weak      TIM16_IRQHandler
+  .thumb_set TIM16_IRQHandler,Default_Handler
+
+  .weak      TIM17_IRQHandler
+  .thumb_set TIM17_IRQHandler,Default_Handler
+
+  .weak      I2C1_IRQHandler
+  .thumb_set I2C1_IRQHandler,Default_Handler
+
+  .weak      SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak      USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f038xx.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f038xx.s
new file mode 100644
index 0000000..5059094
--- /dev/null
+++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f038xx.s
@@ -0,0 +1,261 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f038xx.s
+  * @author    MCD Application Team
+  * @brief     STM32F038xx devices vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M0 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m0
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+  ldr   r0, =_estack
+  mov   sp, r0          /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
+
+LoopCopyDataInit:
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
+/* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
+FillZerobss:
+  str  r3, [r2]
+  adds r2, r2, #4
+
+LoopFillZerobss:
+  cmp r2, r4
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+  bl  SystemInit
+/* Call static constructors */
+  bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+
+LoopForever:
+    b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+   .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  0
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  .word  WWDG_IRQHandler                   /* Window WatchDog              */
+  .word  0                                 /* Reserved                     */
+  .word  RTC_IRQHandler                    /* RTC through the EXTI line    */
+  .word  FLASH_IRQHandler                  /* FLASH                        */
+  .word  RCC_IRQHandler                    /* RCC                          */
+  .word  EXTI0_1_IRQHandler                /* EXTI Line 0 and 1            */
+  .word  EXTI2_3_IRQHandler                /* EXTI Line 2 and 3            */
+  .word  EXTI4_15_IRQHandler               /* EXTI Line 4 to 15            */
+  .word  0                                 /* Reserved                     */
+  .word  DMA1_Channel1_IRQHandler          /* DMA1 Channel 1               */
+  .word  DMA1_Channel2_3_IRQHandler        /* DMA1 Channel 2 and Channel 3 */
+  .word  DMA1_Channel4_5_IRQHandler        /* DMA1 Channel 4 and Channel 5 */
+  .word  ADC1_IRQHandler                   /* ADC1                         */
+  .word  TIM1_BRK_UP_TRG_COM_IRQHandler    /* TIM1 Break, Update, Trigger and Commutation */
+  .word  TIM1_CC_IRQHandler                /* TIM1 Capture Compare         */
+  .word  TIM2_IRQHandler                   /* TIM2                         */
+  .word  TIM3_IRQHandler                   /* TIM3                         */
+  .word  0                                 /* Reserved                     */
+  .word  0                                 /* Reserved                     */
+  .word  TIM14_IRQHandler                  /* TIM14                        */
+  .word  0                                 /* Reserved                     */
+  .word  TIM16_IRQHandler                  /* TIM16                        */
+  .word  TIM17_IRQHandler                  /* TIM17                        */
+  .word  I2C1_IRQHandler                   /* I2C1                         */
+  .word  0                                 /* Reserved                     */
+  .word  SPI1_IRQHandler                   /* SPI1                         */
+  .word  0                                 /* Reserved                     */
+  .word  USART1_IRQHandler                 /* USART1                       */
+  .word  0                                 /* Reserved                     */
+  .word  0                                 /* Reserved                     */
+  .word  0                                 /* Reserved                     */
+  .word  0                                 /* Reserved                     */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak      NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak      HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak      SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak      PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak      SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak      WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak      RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak      FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak      RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak      EXTI0_1_IRQHandler
+  .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+  .weak      EXTI2_3_IRQHandler
+  .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+  .weak      EXTI4_15_IRQHandler
+  .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel2_3_IRQHandler
+  .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel4_5_IRQHandler
+  .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+  .weak      ADC1_IRQHandler
+  .thumb_set ADC1_IRQHandler,Default_Handler
+
+  .weak      TIM1_BRK_UP_TRG_COM_IRQHandler
+  .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+  .weak      TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak      TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak      TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak      TIM14_IRQHandler
+  .thumb_set TIM14_IRQHandler,Default_Handler
+
+  .weak      TIM16_IRQHandler
+  .thumb_set TIM16_IRQHandler,Default_Handler
+
+  .weak      TIM17_IRQHandler
+  .thumb_set TIM17_IRQHandler,Default_Handler
+
+  .weak      I2C1_IRQHandler
+  .thumb_set I2C1_IRQHandler,Default_Handler
+
+  .weak      SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak      USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f042x6.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f042x6.s
new file mode 100644
index 0000000..2f80631
--- /dev/null
+++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f042x6.s
@@ -0,0 +1,309 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f042x6.s
+  * @author    MCD Application Team
+  * @brief     STM32F042x4/STM32F042x6 devices vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M0 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m0
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+  ldr   r0, =_estack
+  mov   sp, r0          /* set stack pointer */
+
+/*Check if boot space corresponds to test memory*/
+ 
+    LDR R0,=0x00000004
+    LDR R1, [R0]
+    LSRS R1, R1, #24
+    LDR R2,=0x1F
+    CMP R1, R2
+    BNE ApplicationStart
+
+ /*SYSCFG clock enable*/
+
+    LDR R0,=0x40021018
+    LDR R1,=0x00000001
+    STR R1, [R0]
+
+/*Set CFGR1 register with flash memory remap at address 0*/
+    LDR R0,=0x40010000
+    LDR R1,=0x00000000
+    STR R1, [R0]
+
+ApplicationStart:
+/* Copy the data segment initializers from flash to SRAM */
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
+
+LoopCopyDataInit:
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
+/* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
+FillZerobss:
+  str  r3, [r2]
+  adds r2, r2, #4
+
+LoopFillZerobss:
+  cmp r2, r4
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+  bl  SystemInit
+/* Call static constructors */
+  bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+
+LoopForever:
+    b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+   .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  0
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  .word  WWDG_IRQHandler                   /* Window WatchDog              */
+  .word  PVD_VDDIO2_IRQHandler             /* PVD and VDDIO2 through EXTI Line detect */
+  .word  RTC_IRQHandler                    /* RTC through the EXTI line    */
+  .word  FLASH_IRQHandler                  /* FLASH                        */
+  .word  RCC_CRS_IRQHandler                /* RCC and CRS                  */
+  .word  EXTI0_1_IRQHandler                /* EXTI Line 0 and 1            */
+  .word  EXTI2_3_IRQHandler                /* EXTI Line 2 and 3            */
+  .word  EXTI4_15_IRQHandler               /* EXTI Line 4 to 15            */
+  .word  TSC_IRQHandler                    /* TSC                          */
+  .word  DMA1_Channel1_IRQHandler          /* DMA1 Channel 1               */
+  .word  DMA1_Channel2_3_IRQHandler        /* DMA1 Channel 2 and Channel 3 */
+  .word  DMA1_Channel4_5_IRQHandler        /* DMA1 Channel 4 and Channel 5 */
+  .word  ADC1_IRQHandler                   /* ADC1                         */
+  .word  TIM1_BRK_UP_TRG_COM_IRQHandler    /* TIM1 Break, Update, Trigger and Commutation */
+  .word  TIM1_CC_IRQHandler                /* TIM1 Capture Compare         */
+  .word  TIM2_IRQHandler                   /* TIM2                         */
+  .word  TIM3_IRQHandler                   /* TIM3                         */
+  .word  0                                 /* Reserved                     */
+  .word  0                                 /* Reserved                     */
+  .word  TIM14_IRQHandler                  /* TIM14                        */
+  .word  0                                 /* Reserved                     */
+  .word  TIM16_IRQHandler                  /* TIM16                        */
+  .word  TIM17_IRQHandler                  /* TIM17                        */
+  .word  I2C1_IRQHandler                   /* I2C1                         */
+  .word  0                                 /* Reserved                     */
+  .word  SPI1_IRQHandler                   /* SPI1                         */
+  .word  SPI2_IRQHandler                   /* SPI2                         */
+  .word  USART1_IRQHandler                 /* USART1                       */
+  .word  USART2_IRQHandler                 /* USART2                       */
+  .word  0                                 /* Reserved                     */
+  .word  CEC_CAN_IRQHandler                /* CEC and CAN                  */
+  .word  USB_IRQHandler                    /* USB                          */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak      NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak      HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak      SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak      PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak      SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak      WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak      PVD_VDDIO2_IRQHandler
+  .thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
+
+  .weak      RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak      FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak      RCC_CRS_IRQHandler
+  .thumb_set RCC_CRS_IRQHandler,Default_Handler
+
+  .weak      EXTI0_1_IRQHandler
+  .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+  .weak      EXTI2_3_IRQHandler
+  .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+  .weak      EXTI4_15_IRQHandler
+  .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+  .weak      TSC_IRQHandler
+  .thumb_set TSC_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel2_3_IRQHandler
+  .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel4_5_IRQHandler
+  .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+  .weak      ADC1_IRQHandler
+  .thumb_set ADC1_IRQHandler,Default_Handler
+
+  .weak      TIM1_BRK_UP_TRG_COM_IRQHandler
+  .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+  .weak      TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak      TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak      TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak      TIM14_IRQHandler
+  .thumb_set TIM14_IRQHandler,Default_Handler
+
+  .weak      TIM16_IRQHandler
+  .thumb_set TIM16_IRQHandler,Default_Handler
+
+  .weak      TIM17_IRQHandler
+  .thumb_set TIM17_IRQHandler,Default_Handler
+
+  .weak      I2C1_IRQHandler
+  .thumb_set I2C1_IRQHandler,Default_Handler
+
+  .weak      SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak      SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak      USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak      USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak      CEC_CAN_IRQHandler
+  .thumb_set CEC_CAN_IRQHandler,Default_Handler
+
+  .weak      USB_IRQHandler
+  .thumb_set USB_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f048xx.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f048xx.s
new file mode 100644
index 0000000..b0c04f1
--- /dev/null
+++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f048xx.s
@@ -0,0 +1,279 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f048xx.s
+  * @author    MCD Application Team
+  * @brief     STM32F048xx devices vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M0 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m0
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+  ldr   r0, =_estack
+  mov   sp, r0          /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
+
+LoopCopyDataInit:
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
+/* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
+FillZerobss:
+  str  r3, [r2]
+  adds r2, r2, #4
+
+LoopFillZerobss:
+  cmp r2, r4
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+  bl  SystemInit
+/* Call static constructors */
+  bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+
+LoopForever:
+    b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+   .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  0
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  .word  WWDG_IRQHandler                   /* Window WatchDog              */
+  .word  VDDIO2_IRQHandler                 /* VDDIO2 Monitor through EXTI Line 31 */
+  .word  RTC_IRQHandler                    /* RTC through the EXTI line    */
+  .word  FLASH_IRQHandler                  /* FLASH                        */
+  .word  RCC_CRS_IRQHandler                /* RCC and CRS                  */
+  .word  EXTI0_1_IRQHandler                /* EXTI Line 0 and 1            */
+  .word  EXTI2_3_IRQHandler                /* EXTI Line 2 and 3            */
+  .word  EXTI4_15_IRQHandler               /* EXTI Line 4 to 15            */
+  .word  TSC_IRQHandler                    /* TSC                          */
+  .word  DMA1_Channel1_IRQHandler          /* DMA1 Channel 1               */
+  .word  DMA1_Channel2_3_IRQHandler        /* DMA1 Channel 2 and Channel 3 */
+  .word  DMA1_Channel4_5_IRQHandler        /* DMA1 Channel 4 and Channel 5 */
+  .word  ADC1_IRQHandler                   /* ADC1                         */
+  .word  TIM1_BRK_UP_TRG_COM_IRQHandler    /* TIM1 Break, Update, Trigger and Commutation */
+  .word  TIM1_CC_IRQHandler                /* TIM1 Capture Compare         */
+  .word  TIM2_IRQHandler                   /* TIM2                         */
+  .word  TIM3_IRQHandler                   /* TIM3                         */
+  .word  0                                 /* Reserved                     */
+  .word  0                                 /* Reserved                     */
+  .word  TIM14_IRQHandler                  /* TIM14                        */
+  .word  0                                 /* Reserved                     */
+  .word  TIM16_IRQHandler                  /* TIM16                        */
+  .word  TIM17_IRQHandler                  /* TIM17                        */
+  .word  I2C1_IRQHandler                   /* I2C1                         */
+  .word  0                                 /* Reserved                     */
+  .word  SPI1_IRQHandler                   /* SPI1                         */
+  .word  SPI2_IRQHandler                   /* SPI2                         */
+  .word  USART1_IRQHandler                 /* USART1                       */
+  .word  USART2_IRQHandler                 /* USART2                       */
+  .word  0                                 /* Reserved                     */
+  .word  CEC_CAN_IRQHandler                /* CEC and CAN                  */
+  .word  USB_IRQHandler                    /* USB                          */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak      NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak      HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak      SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak      PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak      SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak      WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak      VDDIO2_IRQHandler
+  .thumb_set VDDIO2_IRQHandler,Default_Handler
+
+  .weak      RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak      FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak      RCC_CRS_IRQHandler
+  .thumb_set RCC_CRS_IRQHandler,Default_Handler
+
+  .weak      EXTI0_1_IRQHandler
+  .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+  .weak      EXTI2_3_IRQHandler
+  .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+  .weak      EXTI4_15_IRQHandler
+  .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+  .weak      TSC_IRQHandler
+  .thumb_set TSC_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel2_3_IRQHandler
+  .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel4_5_IRQHandler
+  .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+  .weak      ADC1_IRQHandler
+  .thumb_set ADC1_IRQHandler,Default_Handler
+
+  .weak      TIM1_BRK_UP_TRG_COM_IRQHandler
+  .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+  .weak      TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak      TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak      TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak      TIM14_IRQHandler
+  .thumb_set TIM14_IRQHandler,Default_Handler
+
+  .weak      TIM16_IRQHandler
+  .thumb_set TIM16_IRQHandler,Default_Handler
+
+  .weak      TIM17_IRQHandler
+  .thumb_set TIM17_IRQHandler,Default_Handler
+
+  .weak      I2C1_IRQHandler
+  .thumb_set I2C1_IRQHandler,Default_Handler
+
+  .weak      SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak      SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak      USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak      USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak      CEC_CAN_IRQHandler
+  .thumb_set CEC_CAN_IRQHandler,Default_Handler
+
+  .weak      USB_IRQHandler
+  .thumb_set USB_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f051x8.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f051x8.s
new file mode 100644
index 0000000..2df2759
--- /dev/null
+++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f051x8.s
@@ -0,0 +1,285 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f051x8.s
+  * @author    MCD Application Team
+  * @brief     STM32F051x4/STM32F051x6/STM32F051x8 devices vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M0 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m0
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+  ldr   r0, =_estack
+  mov   sp, r0          /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
+
+LoopCopyDataInit:
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
+/* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
+FillZerobss:
+  str  r3, [r2]
+  adds r2, r2, #4
+
+LoopFillZerobss:
+  cmp r2, r4
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+  bl  SystemInit
+/* Call static constructors */
+  bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+
+LoopForever:
+    b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+   .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  0
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  .word  WWDG_IRQHandler                   /* Window WatchDog              */
+  .word  PVD_IRQHandler                    /* PVD through EXTI Line detect */
+  .word  RTC_IRQHandler                    /* RTC through the EXTI line    */
+  .word  FLASH_IRQHandler                  /* FLASH                        */
+  .word  RCC_CRS_IRQHandler                /* RCC and CRS                  */
+  .word  EXTI0_1_IRQHandler                /* EXTI Line 0 and 1            */
+  .word  EXTI2_3_IRQHandler                /* EXTI Line 2 and 3            */
+  .word  EXTI4_15_IRQHandler               /* EXTI Line 4 to 15            */
+  .word  TSC_IRQHandler                    /* TSC                          */
+  .word  DMA1_Channel1_IRQHandler          /* DMA1 Channel 1               */
+  .word  DMA1_Channel2_3_IRQHandler        /* DMA1 Channel 2 and Channel 3 */
+  .word  DMA1_Channel4_5_IRQHandler        /* DMA1 Channel 4 and Channel 5 */
+  .word  ADC1_COMP_IRQHandler              /* ADC1, COMP1 and COMP2         */
+  .word  TIM1_BRK_UP_TRG_COM_IRQHandler    /* TIM1 Break, Update, Trigger and Commutation */
+  .word  TIM1_CC_IRQHandler                /* TIM1 Capture Compare         */
+  .word  TIM2_IRQHandler                   /* TIM2                         */
+  .word  TIM3_IRQHandler                   /* TIM3                         */
+  .word  TIM6_DAC_IRQHandler               /* TIM6 and DAC                 */
+  .word  0                                 /* Reserved                     */
+  .word  TIM14_IRQHandler                  /* TIM14                        */
+  .word  TIM15_IRQHandler                  /* TIM15                        */
+  .word  TIM16_IRQHandler                  /* TIM16                        */
+  .word  TIM17_IRQHandler                  /* TIM17                        */
+  .word  I2C1_IRQHandler                   /* I2C1                         */
+  .word  I2C2_IRQHandler                   /* I2C2                         */
+  .word  SPI1_IRQHandler                   /* SPI1                         */
+  .word  SPI2_IRQHandler                   /* SPI2                         */
+  .word  USART1_IRQHandler                 /* USART1                       */
+  .word  USART2_IRQHandler                 /* USART2                       */
+  .word  0                                 /* Reserved                     */
+  .word  CEC_CAN_IRQHandler                /* CEC and CAN                  */
+  .word  0                                 /* Reserved                     */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak      NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak      HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak      SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak      PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak      SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak      WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak      PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak      RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak      FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak      RCC_CRS_IRQHandler
+  .thumb_set RCC_CRS_IRQHandler,Default_Handler
+
+  .weak      EXTI0_1_IRQHandler
+  .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+  .weak      EXTI2_3_IRQHandler
+  .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+  .weak      EXTI4_15_IRQHandler
+  .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+  .weak      TSC_IRQHandler
+  .thumb_set TSC_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel2_3_IRQHandler
+  .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel4_5_IRQHandler
+  .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+  .weak      ADC1_COMP_IRQHandler
+  .thumb_set ADC1_COMP_IRQHandler,Default_Handler
+
+  .weak      TIM1_BRK_UP_TRG_COM_IRQHandler
+  .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+  .weak      TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak      TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak      TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak      TIM6_DAC_IRQHandler
+  .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+  .weak      TIM14_IRQHandler
+  .thumb_set TIM14_IRQHandler,Default_Handler
+
+  .weak      TIM15_IRQHandler
+  .thumb_set TIM15_IRQHandler,Default_Handler
+
+  .weak      TIM16_IRQHandler
+  .thumb_set TIM16_IRQHandler,Default_Handler
+
+  .weak      TIM17_IRQHandler
+  .thumb_set TIM17_IRQHandler,Default_Handler
+
+  .weak      I2C1_IRQHandler
+  .thumb_set I2C1_IRQHandler,Default_Handler
+
+  .weak      I2C2_IRQHandler
+  .thumb_set I2C2_IRQHandler,Default_Handler
+
+  .weak      SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak      SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak      USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak      USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak      CEC_CAN_IRQHandler
+  .thumb_set CEC_CAN_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f058xx.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f058xx.s
new file mode 100644
index 0000000..f934e6b
--- /dev/null
+++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f058xx.s
@@ -0,0 +1,282 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f058xx.s
+  * @author    MCD Application Team
+  * @brief     STM32F058xx devices vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M0 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m0
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+  ldr   r0, =_estack
+  mov   sp, r0          /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
+
+LoopCopyDataInit:
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
+/* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
+FillZerobss:
+  str  r3, [r2]
+  adds r2, r2, #4
+
+LoopFillZerobss:
+  cmp r2, r4
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+  bl  SystemInit
+/* Call static constructors */
+  bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+
+LoopForever:
+    b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+   .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  0
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  .word  WWDG_IRQHandler                   /* Window WatchDog              */
+  .word  0                                 /* Reserved                     */
+  .word  RTC_IRQHandler                    /* RTC through the EXTI line    */
+  .word  FLASH_IRQHandler                  /* FLASH                        */
+  .word  RCC_CRS_IRQHandler                /* RCC and CRS                  */
+  .word  EXTI0_1_IRQHandler                /* EXTI Line 0 and 1            */
+  .word  EXTI2_3_IRQHandler                /* EXTI Line 2 and 3            */
+  .word  EXTI4_15_IRQHandler               /* EXTI Line 4 to 15            */
+  .word  TSC_IRQHandler                    /* TSC                          */
+  .word  DMA1_Channel1_IRQHandler          /* DMA1 Channel 1               */
+  .word  DMA1_Channel2_3_IRQHandler        /* DMA1 Channel 2 and Channel 3 */
+  .word  DMA1_Channel4_5_IRQHandler        /* DMA1 Channel 4 and Channel 5 */
+  .word  ADC1_COMP_IRQHandler              /* ADC1, COMP1 and COMP2         */
+  .word  TIM1_BRK_UP_TRG_COM_IRQHandler    /* TIM1 Break, Update, Trigger and Commutation */
+  .word  TIM1_CC_IRQHandler                /* TIM1 Capture Compare         */
+  .word  TIM2_IRQHandler                   /* TIM2                         */
+  .word  TIM3_IRQHandler                   /* TIM3                         */
+  .word  TIM6_DAC_IRQHandler               /* TIM6 and DAC                 */
+  .word  0                                 /* Reserved                     */
+  .word  TIM14_IRQHandler                  /* TIM14                        */
+  .word  TIM15_IRQHandler                  /* TIM15                        */
+  .word  TIM16_IRQHandler                  /* TIM16                        */
+  .word  TIM17_IRQHandler                  /* TIM17                        */
+  .word  I2C1_IRQHandler                   /* I2C1                         */
+  .word  I2C2_IRQHandler                   /* I2C2                         */
+  .word  SPI1_IRQHandler                   /* SPI1                         */
+  .word  SPI2_IRQHandler                   /* SPI2                         */
+  .word  USART1_IRQHandler                 /* USART1                       */
+  .word  USART2_IRQHandler                 /* USART2                       */
+  .word  0                                 /* Reserved                     */
+  .word  CEC_CAN_IRQHandler                /* CEC and CAN                  */
+  .word  0                                 /* Reserved                     */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak      NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak      HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak      SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak      PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak      SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak      WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak      RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak      FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak      RCC_CRS_IRQHandler
+  .thumb_set RCC_CRS_IRQHandler,Default_Handler
+
+  .weak      EXTI0_1_IRQHandler
+  .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+  .weak      EXTI2_3_IRQHandler
+  .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+  .weak      EXTI4_15_IRQHandler
+  .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+  .weak      TSC_IRQHandler
+  .thumb_set TSC_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel2_3_IRQHandler
+  .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel4_5_IRQHandler
+  .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+  .weak      ADC1_COMP_IRQHandler
+  .thumb_set ADC1_COMP_IRQHandler,Default_Handler
+
+  .weak      TIM1_BRK_UP_TRG_COM_IRQHandler
+  .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+  .weak      TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak      TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak      TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak      TIM6_DAC_IRQHandler
+  .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+  .weak      TIM14_IRQHandler
+  .thumb_set TIM14_IRQHandler,Default_Handler
+
+  .weak      TIM15_IRQHandler
+  .thumb_set TIM15_IRQHandler,Default_Handler
+
+  .weak      TIM16_IRQHandler
+  .thumb_set TIM16_IRQHandler,Default_Handler
+
+  .weak      TIM17_IRQHandler
+  .thumb_set TIM17_IRQHandler,Default_Handler
+
+  .weak      I2C1_IRQHandler
+  .thumb_set I2C1_IRQHandler,Default_Handler
+
+  .weak      I2C2_IRQHandler
+  .thumb_set I2C2_IRQHandler,Default_Handler
+
+  .weak      SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak      SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak      USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak      USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak      CEC_CAN_IRQHandler
+  .thumb_set CEC_CAN_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f070x6.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f070x6.s
new file mode 100644
index 0000000..c9e85bc
--- /dev/null
+++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f070x6.s
@@ -0,0 +1,294 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f070x6.s
+  * @author    MCD Application Team
+  * @brief     STM32F070x4/STM32F070x6 devices vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M0 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m0
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+  ldr   r0, =_estack
+  mov   sp, r0          /* set stack pointer */
+
+/*Check if boot space corresponds to test memory*/
+ 
+    LDR R0,=0x00000004
+    LDR R1, [R0]
+    LSRS R1, R1, #24
+    LDR R2,=0x1F
+    CMP R1, R2
+    BNE ApplicationStart
+
+ /*SYSCFG clock enable*/
+
+    LDR R0,=0x40021018
+    LDR R1,=0x00000001
+    STR R1, [R0]
+
+/*Set CFGR1 register with flash memory remap at address 0*/
+    LDR R0,=0x40010000
+    LDR R1,=0x00000000
+    STR R1, [R0]
+
+ApplicationStart:
+/* Copy the data segment initializers from flash to SRAM */
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
+
+LoopCopyDataInit:
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
+/* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
+FillZerobss:
+  str  r3, [r2]
+  adds r2, r2, #4
+
+LoopFillZerobss:
+  cmp r2, r4
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+  bl  SystemInit
+/* Call static constructors */
+  bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+
+LoopForever:
+    b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+   .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  0
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  .word  WWDG_IRQHandler                   /* Window WatchDog              */
+  .word  0                                 /* Reserved                     */
+  .word  RTC_IRQHandler                    /* RTC through the EXTI line    */
+  .word  FLASH_IRQHandler                  /* FLASH                        */
+  .word  RCC_IRQHandler                    /* RCC                          */
+  .word  EXTI0_1_IRQHandler                /* EXTI Line 0 and 1            */
+  .word  EXTI2_3_IRQHandler                /* EXTI Line 2 and 3            */
+  .word  EXTI4_15_IRQHandler               /* EXTI Line 4 to 15            */
+  .word  0                                 /* Reserved                     */
+  .word  DMA1_Channel1_IRQHandler          /* DMA1 Channel 1               */
+  .word  DMA1_Channel2_3_IRQHandler        /* DMA1 Channel 2 and Channel 3 */
+  .word  DMA1_Channel4_5_IRQHandler        /* DMA1 Channel 4 and Channel 5 */
+  .word  ADC1_IRQHandler                   /* ADC1                         */
+  .word  TIM1_BRK_UP_TRG_COM_IRQHandler    /* TIM1 Break, Update, Trigger and Commutation */
+  .word  TIM1_CC_IRQHandler                /* TIM1 Capture Compare         */
+  .word  0                                 /* Reserved                     */
+  .word  TIM3_IRQHandler                   /* TIM3                         */
+  .word  0                                 /* Reserved                     */
+  .word  0                                 /* Reserved                     */
+  .word  TIM14_IRQHandler                  /* TIM14                        */
+  .word  0                                 /* Reserved                     */
+  .word  TIM16_IRQHandler                  /* TIM16                        */
+  .word  TIM17_IRQHandler                  /* TIM17                        */
+  .word  I2C1_IRQHandler                   /* I2C1                         */
+  .word  0                                 /* Reserved                     */
+  .word  SPI1_IRQHandler                   /* SPI1                         */
+  .word  0                                 /* Reserved                     */
+  .word  USART1_IRQHandler                 /* USART1                       */
+  .word  USART2_IRQHandler                 /* USART2                       */
+  .word  0                                 /* Reserved                     */
+  .word  0                                 /* Reserved                     */
+  .word  USB_IRQHandler                    /* USB                          */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak      NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak      HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak      SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak      PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak      SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak      WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak      RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak      FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak      RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak      EXTI0_1_IRQHandler
+  .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+  .weak      EXTI2_3_IRQHandler
+  .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+  .weak      EXTI4_15_IRQHandler
+  .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel2_3_IRQHandler
+  .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel4_5_IRQHandler
+  .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+  .weak      ADC1_IRQHandler
+  .thumb_set ADC1_IRQHandler,Default_Handler
+
+  .weak      TIM1_BRK_UP_TRG_COM_IRQHandler
+  .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+  .weak      TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak      TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak      TIM14_IRQHandler
+  .thumb_set TIM14_IRQHandler,Default_Handler
+
+  .weak      TIM16_IRQHandler
+  .thumb_set TIM16_IRQHandler,Default_Handler
+
+  .weak      TIM17_IRQHandler
+  .thumb_set TIM17_IRQHandler,Default_Handler
+
+  .weak      I2C1_IRQHandler
+  .thumb_set I2C1_IRQHandler,Default_Handler
+
+  .weak      SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak      USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak      USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak      USB_IRQHandler
+  .thumb_set USB_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f070xb.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f070xb.s
new file mode 100644
index 0000000..c3026e0
--- /dev/null
+++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f070xb.s
@@ -0,0 +1,282 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f070xb.s
+  * @author    MCD Application Team
+  * @brief     STM32F070xb/STM32F070x8 devices vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M0 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m0
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+  ldr   r0, =_estack
+  mov   sp, r0          /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
+
+LoopCopyDataInit:
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
+/* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
+FillZerobss:
+  str  r3, [r2]
+  adds r2, r2, #4
+
+LoopFillZerobss:
+  cmp r2, r4
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+  bl  SystemInit
+/* Call static constructors */
+  bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+
+LoopForever:
+    b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+   .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  0
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  .word  WWDG_IRQHandler                   /* Window WatchDog              */
+  .word  0                                 /* Reserved                     */
+  .word  RTC_IRQHandler                    /* RTC through the EXTI line    */
+  .word  FLASH_IRQHandler                  /* FLASH                        */
+  .word  RCC_IRQHandler                    /* RCC                          */
+  .word  EXTI0_1_IRQHandler                /* EXTI Line 0 and 1            */
+  .word  EXTI2_3_IRQHandler                /* EXTI Line 2 and 3            */
+  .word  EXTI4_15_IRQHandler               /* EXTI Line 4 to 15            */
+  .word  0                                 /* Reserved                     */
+  .word  DMA1_Channel1_IRQHandler          /* DMA1 Channel 1               */
+  .word  DMA1_Channel2_3_IRQHandler        /* DMA1 Channel 2 and Channel 3 */
+  .word  DMA1_Channel4_5_IRQHandler        /* DMA1 Channel 4 and Channel 5 */
+  .word  ADC1_IRQHandler                   /* ADC1                         */
+  .word  TIM1_BRK_UP_TRG_COM_IRQHandler    /* TIM1 Break, Update, Trigger and Commutation */
+  .word  TIM1_CC_IRQHandler                /* TIM1 Capture Compare         */
+  .word  0                                 /* Reserved                     */
+  .word  TIM3_IRQHandler                   /* TIM3                         */
+  .word  TIM6_IRQHandler                   /* TIM6                         */
+  .word  TIM7_IRQHandler                   /* TIM7                         */
+  .word  TIM14_IRQHandler                  /* TIM14                        */
+  .word  TIM15_IRQHandler                  /* TIM15                        */
+  .word  TIM16_IRQHandler                  /* TIM16                        */
+  .word  TIM17_IRQHandler                  /* TIM17                        */
+  .word  I2C1_IRQHandler                   /* I2C1                         */
+  .word  I2C2_IRQHandler                   /* I2C2                         */
+  .word  SPI1_IRQHandler                   /* SPI1                         */
+  .word  SPI2_IRQHandler                   /* SPI2                         */
+  .word  USART1_IRQHandler                 /* USART1                       */
+  .word  USART2_IRQHandler                 /* USART2                       */
+  .word  USART3_4_IRQHandler               /* USART3 and USART4            */
+  .word  0                                 /* Reserved                     */
+  .word  USB_IRQHandler                    /* USB                          */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak      NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak      HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak      SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak      PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak      SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak      WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak      RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak      FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak      RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak      EXTI0_1_IRQHandler
+  .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+  .weak      EXTI2_3_IRQHandler
+  .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+  .weak      EXTI4_15_IRQHandler
+  .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel2_3_IRQHandler
+  .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel4_5_IRQHandler
+  .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+  .weak      ADC1_IRQHandler
+  .thumb_set ADC1_IRQHandler,Default_Handler
+
+  .weak      TIM1_BRK_UP_TRG_COM_IRQHandler
+  .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+  .weak      TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak      TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak      TIM6_IRQHandler
+  .thumb_set TIM6_IRQHandler,Default_Handler
+
+  .weak      TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler
+
+  .weak      TIM14_IRQHandler
+  .thumb_set TIM14_IRQHandler,Default_Handler
+
+  .weak      TIM15_IRQHandler
+  .thumb_set TIM15_IRQHandler,Default_Handler
+
+  .weak      TIM16_IRQHandler
+  .thumb_set TIM16_IRQHandler,Default_Handler
+
+  .weak      TIM17_IRQHandler
+  .thumb_set TIM17_IRQHandler,Default_Handler
+
+  .weak      I2C1_IRQHandler
+  .thumb_set I2C1_IRQHandler,Default_Handler
+
+  .weak      I2C2_IRQHandler
+  .thumb_set I2C2_IRQHandler,Default_Handler
+
+  .weak      SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak      SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak      USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak      USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak      USART3_4_IRQHandler
+  .thumb_set USART3_4_IRQHandler,Default_Handler
+
+  .weak      USB_IRQHandler
+  .thumb_set USB_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f071xb.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f071xb.s
new file mode 100644
index 0000000..7dcb62d
--- /dev/null
+++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f071xb.s
@@ -0,0 +1,291 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f071xb.s
+  * @author    MCD Application Team
+  * @brief     STM32F071x8/STM32F071xB devices vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M0 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m0
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+  ldr   r0, =_estack
+  mov   sp, r0          /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
+
+LoopCopyDataInit:
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
+/* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
+FillZerobss:
+  str  r3, [r2]
+  adds r2, r2, #4
+
+LoopFillZerobss:
+  cmp r2, r4
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+  bl  SystemInit
+/* Call static constructors */
+  bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+
+LoopForever:
+    b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+   .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  0
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  .word  WWDG_IRQHandler                   /* Window WatchDog              */
+  .word  PVD_VDDIO2_IRQHandler             /* PVD and VDDIO2 through EXTI Line detect */
+  .word  RTC_IRQHandler                    /* RTC through the EXTI line    */
+  .word  FLASH_IRQHandler                  /* FLASH                        */
+  .word  RCC_CRS_IRQHandler                /* RCC and CRS                  */
+  .word  EXTI0_1_IRQHandler                /* EXTI Line 0 and 1            */
+  .word  EXTI2_3_IRQHandler                /* EXTI Line 2 and 3            */
+  .word  EXTI4_15_IRQHandler               /* EXTI Line 4 to 15            */
+  .word  TSC_IRQHandler                    /* TSC                          */
+  .word  DMA1_Channel1_IRQHandler          /* DMA1 Channel 1               */
+  .word  DMA1_Channel2_3_IRQHandler        /* DMA1 Channel 2 and Channel 3 */
+  .word  DMA1_Channel4_5_6_7_IRQHandler    /* DMA1 Channel 4, Channel 5, Channel 6 and Channel 7*/
+  .word  ADC1_COMP_IRQHandler              /* ADC1, COMP1 and COMP2         */
+  .word  TIM1_BRK_UP_TRG_COM_IRQHandler    /* TIM1 Break, Update, Trigger and Commutation */
+  .word  TIM1_CC_IRQHandler                /* TIM1 Capture Compare         */
+  .word  TIM2_IRQHandler                   /* TIM2                         */
+  .word  TIM3_IRQHandler                   /* TIM3                         */
+  .word  TIM6_DAC_IRQHandler               /* TIM6 and DAC                 */
+  .word  TIM7_IRQHandler                   /* TIM7                         */
+  .word  TIM14_IRQHandler                  /* TIM14                        */
+  .word  TIM15_IRQHandler                  /* TIM15                        */
+  .word  TIM16_IRQHandler                  /* TIM16                        */
+  .word  TIM17_IRQHandler                  /* TIM17                        */
+  .word  I2C1_IRQHandler                   /* I2C1                         */
+  .word  I2C2_IRQHandler                   /* I2C2                         */
+  .word  SPI1_IRQHandler                   /* SPI1                         */
+  .word  SPI2_IRQHandler                   /* SPI2                         */
+  .word  USART1_IRQHandler                 /* USART1                       */
+  .word  USART2_IRQHandler                 /* USART2                       */
+  .word  USART3_4_IRQHandler               /* USART3 and USART4            */
+  .word  CEC_CAN_IRQHandler                /* CEC and CAN                  */
+  .word  0                                 /* Reserved                     */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak      NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak      HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak      SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak      PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak      SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak      WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak      PVD_VDDIO2_IRQHandler
+  .thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
+
+  .weak      RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak      FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak      RCC_CRS_IRQHandler
+  .thumb_set RCC_CRS_IRQHandler,Default_Handler
+
+  .weak      EXTI0_1_IRQHandler
+  .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+  .weak      EXTI2_3_IRQHandler
+  .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+  .weak      EXTI4_15_IRQHandler
+  .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+  .weak      TSC_IRQHandler
+  .thumb_set TSC_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel2_3_IRQHandler
+  .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel4_5_6_7_IRQHandler
+  .thumb_set DMA1_Channel4_5_6_7_IRQHandler,Default_Handler
+
+  .weak      ADC1_COMP_IRQHandler
+  .thumb_set ADC1_COMP_IRQHandler,Default_Handler
+
+  .weak      TIM1_BRK_UP_TRG_COM_IRQHandler
+  .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+  .weak      TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak      TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak      TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak      TIM6_DAC_IRQHandler
+  .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+  .weak      TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler
+
+  .weak      TIM14_IRQHandler
+  .thumb_set TIM14_IRQHandler,Default_Handler
+
+  .weak      TIM15_IRQHandler
+  .thumb_set TIM15_IRQHandler,Default_Handler
+
+  .weak      TIM16_IRQHandler
+  .thumb_set TIM16_IRQHandler,Default_Handler
+
+  .weak      TIM17_IRQHandler
+  .thumb_set TIM17_IRQHandler,Default_Handler
+
+  .weak      I2C1_IRQHandler
+  .thumb_set I2C1_IRQHandler,Default_Handler
+
+  .weak      I2C2_IRQHandler
+  .thumb_set I2C2_IRQHandler,Default_Handler
+
+  .weak      SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak      SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak      USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak      USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak      USART3_4_IRQHandler
+  .thumb_set USART3_4_IRQHandler,Default_Handler
+
+  .weak      CEC_CAN_IRQHandler
+  .thumb_set CEC_CAN_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f072xb.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f072xb.s
new file mode 100644
index 0000000..9d431a9
--- /dev/null
+++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f072xb.s
@@ -0,0 +1,294 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f072xb.s
+  * @author    MCD Application Team
+  * @brief     STM32F072x8/STM32F072xB devices vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M0 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m0
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+  ldr   r0, =_estack
+  mov   sp, r0          /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
+
+LoopCopyDataInit:
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
+/* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
+FillZerobss:
+  str  r3, [r2]
+  adds r2, r2, #4
+
+LoopFillZerobss:
+  cmp r2, r4
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+  bl  SystemInit
+/* Call static constructors */
+  bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+
+LoopForever:
+    b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+   .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  0
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  .word  WWDG_IRQHandler                   /* Window WatchDog              */
+  .word  PVD_VDDIO2_IRQHandler             /* PVD and VDDIO2 through EXTI Line detect */
+  .word  RTC_IRQHandler                    /* RTC through the EXTI line    */
+  .word  FLASH_IRQHandler                  /* FLASH                        */
+  .word  RCC_CRS_IRQHandler                /* RCC and CRS                  */
+  .word  EXTI0_1_IRQHandler                /* EXTI Line 0 and 1            */
+  .word  EXTI2_3_IRQHandler                /* EXTI Line 2 and 3            */
+  .word  EXTI4_15_IRQHandler               /* EXTI Line 4 to 15            */
+  .word  TSC_IRQHandler                    /* TSC                          */
+  .word  DMA1_Channel1_IRQHandler          /* DMA1 Channel 1               */
+  .word  DMA1_Channel2_3_IRQHandler        /* DMA1 Channel 2 and Channel 3 */
+  .word  DMA1_Channel4_5_6_7_IRQHandler    /* DMA1 Channel 4, Channel 5, Channel 6 and Channel 7*/
+  .word  ADC1_COMP_IRQHandler              /* ADC1, COMP1 and COMP2         */
+  .word  TIM1_BRK_UP_TRG_COM_IRQHandler    /* TIM1 Break, Update, Trigger and Commutation */
+  .word  TIM1_CC_IRQHandler                /* TIM1 Capture Compare         */
+  .word  TIM2_IRQHandler                   /* TIM2                         */
+  .word  TIM3_IRQHandler                   /* TIM3                         */
+  .word  TIM6_DAC_IRQHandler               /* TIM6 and DAC                 */
+  .word  TIM7_IRQHandler                   /* TIM7                         */
+  .word  TIM14_IRQHandler                  /* TIM14                        */
+  .word  TIM15_IRQHandler                  /* TIM15                        */
+  .word  TIM16_IRQHandler                  /* TIM16                        */
+  .word  TIM17_IRQHandler                  /* TIM17                        */
+  .word  I2C1_IRQHandler                   /* I2C1                         */
+  .word  I2C2_IRQHandler                   /* I2C2                         */
+  .word  SPI1_IRQHandler                   /* SPI1                         */
+  .word  SPI2_IRQHandler                   /* SPI2                         */
+  .word  USART1_IRQHandler                 /* USART1                       */
+  .word  USART2_IRQHandler                 /* USART2                       */
+  .word  USART3_4_IRQHandler               /* USART3 and USART4            */
+  .word  CEC_CAN_IRQHandler                /* CEC and CAN                  */
+  .word  USB_IRQHandler                    /* USB                          */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak      NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak      HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak      SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak      PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak      SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak      WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak      PVD_VDDIO2_IRQHandler
+  .thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
+
+  .weak      RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak      FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak      RCC_CRS_IRQHandler
+  .thumb_set RCC_CRS_IRQHandler,Default_Handler
+
+  .weak      EXTI0_1_IRQHandler
+  .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+  .weak      EXTI2_3_IRQHandler
+  .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+  .weak      EXTI4_15_IRQHandler
+  .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+  .weak      TSC_IRQHandler
+  .thumb_set TSC_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel2_3_IRQHandler
+  .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel4_5_6_7_IRQHandler
+  .thumb_set DMA1_Channel4_5_6_7_IRQHandler,Default_Handler
+
+  .weak      ADC1_COMP_IRQHandler
+  .thumb_set ADC1_COMP_IRQHandler,Default_Handler
+
+  .weak      TIM1_BRK_UP_TRG_COM_IRQHandler
+  .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+  .weak      TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak      TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak      TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak      TIM6_DAC_IRQHandler
+  .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+  .weak      TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler
+
+  .weak      TIM14_IRQHandler
+  .thumb_set TIM14_IRQHandler,Default_Handler
+
+  .weak      TIM15_IRQHandler
+  .thumb_set TIM15_IRQHandler,Default_Handler
+
+  .weak      TIM16_IRQHandler
+  .thumb_set TIM16_IRQHandler,Default_Handler
+
+  .weak      TIM17_IRQHandler
+  .thumb_set TIM17_IRQHandler,Default_Handler
+
+  .weak      I2C1_IRQHandler
+  .thumb_set I2C1_IRQHandler,Default_Handler
+
+  .weak      I2C2_IRQHandler
+  .thumb_set I2C2_IRQHandler,Default_Handler
+
+  .weak      SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak      SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak      USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak      USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak      USART3_4_IRQHandler
+  .thumb_set USART3_4_IRQHandler,Default_Handler
+
+  .weak      CEC_CAN_IRQHandler
+  .thumb_set CEC_CAN_IRQHandler,Default_Handler
+
+  .weak      USB_IRQHandler
+  .thumb_set USB_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f078xx.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f078xx.s
new file mode 100644
index 0000000..c7b54ba
--- /dev/null
+++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f078xx.s
@@ -0,0 +1,294 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f078xx.s
+  * @author    MCD Application Team
+  * @brief     STM32F078xx devices vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M0 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m0
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+  ldr   r0, =_estack
+  mov   sp, r0          /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
+
+LoopCopyDataInit:
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
+/* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
+FillZerobss:
+  str  r3, [r2]
+  adds r2, r2, #4
+
+LoopFillZerobss:
+  cmp r2, r4
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+  bl  SystemInit
+/* Call static constructors */
+  bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+
+LoopForever:
+    b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+   .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  0
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  .word  WWDG_IRQHandler                   /* Window WatchDog              */
+  .word  VDDIO2_IRQHandler                 /* VDDIO2 Monitor through EXTI Line 31 */
+  .word  RTC_IRQHandler                    /* RTC through the EXTI line    */
+  .word  FLASH_IRQHandler                  /* FLASH                        */
+  .word  RCC_CRS_IRQHandler                /* RCC and CRS                  */
+  .word  EXTI0_1_IRQHandler                /* EXTI Line 0 and 1            */
+  .word  EXTI2_3_IRQHandler                /* EXTI Line 2 and 3            */
+  .word  EXTI4_15_IRQHandler               /* EXTI Line 4 to 15            */
+  .word  TSC_IRQHandler                    /* TSC                          */
+  .word  DMA1_Channel1_IRQHandler          /* DMA1 Channel 1               */
+  .word  DMA1_Channel2_3_IRQHandler        /* DMA1 Channel 2 and Channel 3 */
+  .word  DMA1_Channel4_5_6_7_IRQHandler    /* DMA1 Channel 4, Channel 5, Channel 6 and Channel 7*/
+  .word  ADC1_COMP_IRQHandler              /* ADC1, COMP1 and COMP2         */
+  .word  TIM1_BRK_UP_TRG_COM_IRQHandler    /* TIM1 Break, Update, Trigger and Commutation */
+  .word  TIM1_CC_IRQHandler                /* TIM1 Capture Compare         */
+  .word  TIM2_IRQHandler                   /* TIM2                         */
+  .word  TIM3_IRQHandler                   /* TIM3                         */
+  .word  TIM6_DAC_IRQHandler               /* TIM6 and DAC                 */
+  .word  TIM7_IRQHandler                   /* TIM7                         */
+  .word  TIM14_IRQHandler                  /* TIM14                        */
+  .word  TIM15_IRQHandler                  /* TIM15                        */
+  .word  TIM16_IRQHandler                  /* TIM16                        */
+  .word  TIM17_IRQHandler                  /* TIM17                        */
+  .word  I2C1_IRQHandler                   /* I2C1                         */
+  .word  I2C2_IRQHandler                   /* I2C2                         */
+  .word  SPI1_IRQHandler                   /* SPI1                         */
+  .word  SPI2_IRQHandler                   /* SPI2                         */
+  .word  USART1_IRQHandler                 /* USART1                       */
+  .word  USART2_IRQHandler                 /* USART2                       */
+  .word  USART3_4_IRQHandler               /* USART3 and USART4            */
+  .word  CEC_CAN_IRQHandler                /* CEC and CAN                  */
+  .word  USB_IRQHandler                    /* USB                          */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak      NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak      HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak      SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak      PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak      SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak      WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak      VDDIO2_IRQHandler
+  .thumb_set VDDIO2_IRQHandler,Default_Handler
+
+  .weak      RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak      FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak      RCC_CRS_IRQHandler
+  .thumb_set RCC_CRS_IRQHandler,Default_Handler
+
+  .weak      EXTI0_1_IRQHandler
+  .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+  .weak      EXTI2_3_IRQHandler
+  .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+  .weak      EXTI4_15_IRQHandler
+  .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+  .weak      TSC_IRQHandler
+  .thumb_set TSC_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel2_3_IRQHandler
+  .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel4_5_6_7_IRQHandler
+  .thumb_set DMA1_Channel4_5_6_7_IRQHandler,Default_Handler
+
+  .weak      ADC1_COMP_IRQHandler
+  .thumb_set ADC1_COMP_IRQHandler,Default_Handler
+
+  .weak      TIM1_BRK_UP_TRG_COM_IRQHandler
+  .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+  .weak      TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak      TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak      TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak      TIM6_DAC_IRQHandler
+  .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+  .weak      TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler
+
+  .weak      TIM14_IRQHandler
+  .thumb_set TIM14_IRQHandler,Default_Handler
+
+  .weak      TIM15_IRQHandler
+  .thumb_set TIM15_IRQHandler,Default_Handler
+
+  .weak      TIM16_IRQHandler
+  .thumb_set TIM16_IRQHandler,Default_Handler
+
+  .weak      TIM17_IRQHandler
+  .thumb_set TIM17_IRQHandler,Default_Handler
+
+  .weak      I2C1_IRQHandler
+  .thumb_set I2C1_IRQHandler,Default_Handler
+
+  .weak      I2C2_IRQHandler
+  .thumb_set I2C2_IRQHandler,Default_Handler
+
+  .weak      SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak      SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak      USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak      USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak      USART3_4_IRQHandler
+  .thumb_set USART3_4_IRQHandler,Default_Handler
+
+  .weak      CEC_CAN_IRQHandler
+  .thumb_set CEC_CAN_IRQHandler,Default_Handler
+
+  .weak      USB_IRQHandler
+  .thumb_set USB_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f091xc.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f091xc.s
new file mode 100644
index 0000000..1e7d642
--- /dev/null
+++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f091xc.s
@@ -0,0 +1,290 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f091xc.s
+  * @author    MCD Application Team
+  * @brief     STM32F091xC devices vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M0 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m0
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+  ldr   r0, =_estack
+  mov   sp, r0          /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
+
+LoopCopyDataInit:
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
+/* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
+FillZerobss:
+  str  r3, [r2]
+  adds r2, r2, #4
+
+LoopFillZerobss:
+  cmp r2, r4
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+  bl  SystemInit
+/* Call static constructors */
+  bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+
+LoopForever:
+    b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+   .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  0
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  .word  WWDG_IRQHandler                   /* Window WatchDog              */
+  .word  PVD_VDDIO2_IRQHandler             /* PVD and VDDIO2 through EXTI Line detect */
+  .word  RTC_IRQHandler                    /* RTC through the EXTI line    */
+  .word  FLASH_IRQHandler                  /* FLASH                        */
+  .word  RCC_CRS_IRQHandler                /* RCC and CRS                  */
+  .word  EXTI0_1_IRQHandler                /* EXTI Line 0 and 1            */
+  .word  EXTI2_3_IRQHandler                /* EXTI Line 2 and 3            */
+  .word  EXTI4_15_IRQHandler               /* EXTI Line 4 to 15            */
+  .word  TSC_IRQHandler                    /* TSC                          */
+  .word  DMA1_Ch1_IRQHandler               /* DMA1 Channel 1               */
+  .word  DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler  /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
+  .word  DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler  /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
+  .word  ADC1_COMP_IRQHandler              /* ADC1, COMP1 and COMP2         */
+  .word  TIM1_BRK_UP_TRG_COM_IRQHandler    /* TIM1 Break, Update, Trigger and Commutation */
+  .word  TIM1_CC_IRQHandler                /* TIM1 Capture Compare         */
+  .word  TIM2_IRQHandler                   /* TIM2                         */
+  .word  TIM3_IRQHandler                   /* TIM3                         */
+  .word  TIM6_DAC_IRQHandler               /* TIM6 and DAC                 */
+  .word  TIM7_IRQHandler                   /* TIM7                         */
+  .word  TIM14_IRQHandler                  /* TIM14                        */
+  .word  TIM15_IRQHandler                  /* TIM15                        */
+  .word  TIM16_IRQHandler                  /* TIM16                        */
+  .word  TIM17_IRQHandler                  /* TIM17                        */
+  .word  I2C1_IRQHandler                   /* I2C1                         */
+  .word  I2C2_IRQHandler                   /* I2C2                         */
+  .word  SPI1_IRQHandler                   /* SPI1                         */
+  .word  SPI2_IRQHandler                   /* SPI2                         */
+  .word  USART1_IRQHandler                 /* USART1                       */
+  .word  USART2_IRQHandler                 /* USART2                       */
+  .word  USART3_8_IRQHandler               /* USART3, USART4, USART5, USART6, USART7, USART8 */
+  .word  CEC_CAN_IRQHandler                /* CEC and CAN                  */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak      NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak      HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak      SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak      PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak      SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak      WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak      PVD_VDDIO2_IRQHandler
+  .thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
+
+  .weak      RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak      FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak      RCC_CRS_IRQHandler
+  .thumb_set RCC_CRS_IRQHandler,Default_Handler
+
+  .weak      EXTI0_1_IRQHandler
+  .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+  .weak      EXTI2_3_IRQHandler
+  .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+  .weak      EXTI4_15_IRQHandler
+  .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+  .weak      TSC_IRQHandler
+  .thumb_set TSC_IRQHandler,Default_Handler
+
+  .weak      DMA1_Ch1_IRQHandler
+  .thumb_set DMA1_Ch1_IRQHandler,Default_Handler
+
+  .weak      DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
+  .thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
+
+  .weak      DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
+  .thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
+
+  .weak      ADC1_COMP_IRQHandler
+  .thumb_set ADC1_COMP_IRQHandler,Default_Handler
+
+  .weak      TIM1_BRK_UP_TRG_COM_IRQHandler
+  .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+  .weak      TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak      TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak      TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak      TIM6_DAC_IRQHandler
+  .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+  .weak      TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler
+
+  .weak      TIM14_IRQHandler
+  .thumb_set TIM14_IRQHandler,Default_Handler
+
+  .weak      TIM15_IRQHandler
+  .thumb_set TIM15_IRQHandler,Default_Handler
+
+  .weak      TIM16_IRQHandler
+  .thumb_set TIM16_IRQHandler,Default_Handler
+
+  .weak      TIM17_IRQHandler
+  .thumb_set TIM17_IRQHandler,Default_Handler
+
+  .weak      I2C1_IRQHandler
+  .thumb_set I2C1_IRQHandler,Default_Handler
+
+  .weak      I2C2_IRQHandler
+  .thumb_set I2C2_IRQHandler,Default_Handler
+
+  .weak      SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak      SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak      USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak      USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak      USART3_8_IRQHandler
+  .thumb_set USART3_8_IRQHandler,Default_Handler
+
+  .weak      CEC_CAN_IRQHandler
+  .thumb_set CEC_CAN_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f098xx.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f098xx.s
new file mode 100644
index 0000000..5826c2f
--- /dev/null
+++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f098xx.s
@@ -0,0 +1,290 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f098xx.s
+  * @author    MCD Application Team
+  * @brief     STM32F098xx devices vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M0 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m0
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+  ldr   r0, =_estack
+  mov   sp, r0          /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
+
+LoopCopyDataInit:
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
+/* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
+FillZerobss:
+  str  r3, [r2]
+  adds r2, r2, #4
+
+LoopFillZerobss:
+  cmp r2, r4
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+  bl  SystemInit
+/* Call static constructors */
+  bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+
+LoopForever:
+    b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+   .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  0
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  .word  WWDG_IRQHandler                   /* Window WatchDog              */
+  .word  VDDIO2_IRQHandler                 /* VDDIO2 Monitor through EXTI Line 31 */
+  .word  RTC_IRQHandler                    /* RTC through the EXTI line    */
+  .word  FLASH_IRQHandler                  /* FLASH                        */
+  .word  RCC_CRS_IRQHandler                /* RCC and CRS                  */
+  .word  EXTI0_1_IRQHandler                /* EXTI Line 0 and 1            */
+  .word  EXTI2_3_IRQHandler                /* EXTI Line 2 and 3            */
+  .word  EXTI4_15_IRQHandler               /* EXTI Line 4 to 15            */
+  .word  TSC_IRQHandler                    /* TSC                          */
+  .word  DMA1_Ch1_IRQHandler               /* DMA1 Channel 1               */
+  .word  DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler  /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
+  .word  DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler  /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
+  .word  ADC1_COMP_IRQHandler              /* ADC1, COMP1 and COMP2         */
+  .word  TIM1_BRK_UP_TRG_COM_IRQHandler    /* TIM1 Break, Update, Trigger and Commutation */
+  .word  TIM1_CC_IRQHandler                /* TIM1 Capture Compare         */
+  .word  TIM2_IRQHandler                   /* TIM2                         */
+  .word  TIM3_IRQHandler                   /* TIM3                         */
+  .word  TIM6_DAC_IRQHandler               /* TIM6 and DAC                 */
+  .word  TIM7_IRQHandler                   /* TIM7                         */
+  .word  TIM14_IRQHandler                  /* TIM14                        */
+  .word  TIM15_IRQHandler                  /* TIM15                        */
+  .word  TIM16_IRQHandler                  /* TIM16                        */
+  .word  TIM17_IRQHandler                  /* TIM17                        */
+  .word  I2C1_IRQHandler                   /* I2C1                         */
+  .word  I2C2_IRQHandler                   /* I2C2                         */
+  .word  SPI1_IRQHandler                   /* SPI1                         */
+  .word  SPI2_IRQHandler                   /* SPI2                         */
+  .word  USART1_IRQHandler                 /* USART1                       */
+  .word  USART2_IRQHandler                 /* USART2                       */
+  .word  USART3_8_IRQHandler               /* USART3, USART4, USART5, USART6, USART7, USART8 */
+  .word  CEC_CAN_IRQHandler                /* CEC and CAN                  */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak      NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak      HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak      SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak      PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak      SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak      WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak      VDDIO2_IRQHandler
+  .thumb_set VDDIO2_IRQHandler,Default_Handler
+
+  .weak      RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak      FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak      RCC_CRS_IRQHandler
+  .thumb_set RCC_CRS_IRQHandler,Default_Handler
+
+  .weak      EXTI0_1_IRQHandler
+  .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+  .weak      EXTI2_3_IRQHandler
+  .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+  .weak      EXTI4_15_IRQHandler
+  .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+  .weak      TSC_IRQHandler
+  .thumb_set TSC_IRQHandler,Default_Handler
+
+  .weak      DMA1_Ch1_IRQHandler
+  .thumb_set DMA1_Ch1_IRQHandler,Default_Handler
+
+  .weak      DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
+  .thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
+
+  .weak      DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
+  .thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
+
+  .weak      ADC1_COMP_IRQHandler
+  .thumb_set ADC1_COMP_IRQHandler,Default_Handler
+
+  .weak      TIM1_BRK_UP_TRG_COM_IRQHandler
+  .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+  .weak      TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak      TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak      TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak      TIM6_DAC_IRQHandler
+  .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+  .weak      TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler
+
+  .weak      TIM14_IRQHandler
+  .thumb_set TIM14_IRQHandler,Default_Handler
+
+  .weak      TIM15_IRQHandler
+  .thumb_set TIM15_IRQHandler,Default_Handler
+
+  .weak      TIM16_IRQHandler
+  .thumb_set TIM16_IRQHandler,Default_Handler
+
+  .weak      TIM17_IRQHandler
+  .thumb_set TIM17_IRQHandler,Default_Handler
+
+  .weak      I2C1_IRQHandler
+  .thumb_set I2C1_IRQHandler,Default_Handler
+
+  .weak      I2C2_IRQHandler
+  .thumb_set I2C2_IRQHandler,Default_Handler
+
+  .weak      SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak      SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak      USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak      USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak      USART3_8_IRQHandler
+  .thumb_set USART3_8_IRQHandler,Default_Handler
+
+  .weak      CEC_CAN_IRQHandler
+  .thumb_set CEC_CAN_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+