diff options
Diffstat (limited to 'hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm')
16 files changed, 3991 insertions, 0 deletions
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f030x6.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f030x6.s new file mode 100644 index 0000000..c89426e --- /dev/null +++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f030x6.s @@ -0,0 +1,230 @@ +;*******************************************************************************
+;* File Name : startup_stm32f030x6.s
+;* Author : MCD Application Team
+;* Description : STM32F030x4/STM32F030x6 devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD 0 ; Reserved
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD 0 ; Reserved
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_IRQHandler ; ADC1
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD 0 ; Reserved
+ DCD TIM3_IRQHandler ; TIM3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM14_IRQHandler ; TIM14
+ DCD 0 ; Reserved
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD 0 ; Reserved
+ DCD SPI1_IRQHandler ; SPI1
+ DCD 0 ; Reserved
+ DCD USART1_IRQHandler ; USART1
+
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_5_IRQHandler [WEAK]
+ EXPORT ADC1_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_IRQHandler
+ADC1_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM3_IRQHandler
+TIM14_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+SPI1_IRQHandler
+USART1_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f030x8.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f030x8.s new file mode 100644 index 0000000..02aff1e --- /dev/null +++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f030x8.s @@ -0,0 +1,240 @@ +;*******************************************************************************
+;* File Name : startup_stm32f030x8.s
+;* Author : MCD Application Team
+;* Description : STM32F030x8 devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD 0 ; Reserved
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD 0 ; Reserved
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_IRQHandler ; ADC1
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD 0 ; Reserved
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM6_IRQHandler ; TIM6
+ DCD 0 ; Reserved
+ DCD TIM14_IRQHandler ; TIM14
+ DCD TIM15_IRQHandler ; TIM15
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD I2C2_IRQHandler ; I2C2
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_5_IRQHandler [WEAK]
+ EXPORT ADC1_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM6_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM15_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT I2C2_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_IRQHandler
+ADC1_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM3_IRQHandler
+TIM6_IRQHandler
+TIM14_IRQHandler
+TIM15_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f030xc.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f030xc.s new file mode 100644 index 0000000..bc3c745 --- /dev/null +++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f030xc.s @@ -0,0 +1,245 @@ +;*******************************************************************************
+;* File Name : startup_stm32f030xc.s
+;* Author : MCD Application Team
+;* Description : STM32F030xc/STM32F030xb devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD 0 ; Reserved
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD 0 ; Reserved
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_IRQHandler ; ADC1
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD 0 ; Reserved
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM6_IRQHandler ; TIM6
+ DCD TIM7_IRQHandler ; TIM7
+ DCD TIM14_IRQHandler ; TIM14
+ DCD TIM15_IRQHandler ; TIM15
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD I2C2_IRQHandler ; I2C2
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_6_IRQHandler ; USART3, USART4, USART5, USART6
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_5_IRQHandler [WEAK]
+ EXPORT ADC1_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM6_IRQHandler [WEAK]
+ EXPORT TIM7_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM15_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT I2C2_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT USART3_6_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_IRQHandler
+ADC1_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM3_IRQHandler
+TIM6_IRQHandler
+TIM7_IRQHandler
+TIM14_IRQHandler
+TIM15_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_6_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f031x6.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f031x6.s new file mode 100644 index 0000000..0f01cdd --- /dev/null +++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f031x6.s @@ -0,0 +1,234 @@ +;*******************************************************************************
+;* File Name : startup_stm32f031x6.s
+;* Author : MCD Application Team
+;* Description : STM32F031x4/STM32F031x6 devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detect
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD 0 ; Reserved
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_IRQHandler ; ADC1
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM14_IRQHandler ; TIM14
+ DCD 0 ; Reserved
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD 0 ; Reserved
+ DCD SPI1_IRQHandler ; SPI1
+ DCD 0 ; Reserved
+ DCD USART1_IRQHandler ; USART1
+
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_5_IRQHandler [WEAK]
+ EXPORT ADC1_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+PVD_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_IRQHandler
+ADC1_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM14_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+SPI1_IRQHandler
+USART1_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f038xx.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f038xx.s new file mode 100644 index 0000000..ac7a40d --- /dev/null +++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f038xx.s @@ -0,0 +1,232 @@ +;*******************************************************************************
+;* File Name : startup_stm32f038xx.s
+;* Author : MCD Application Team
+;* Description : STM32F038xx devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD 0 ; Reserved
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD 0 ; Reserved
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_IRQHandler ; ADC1
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM14_IRQHandler ; TIM14
+ DCD 0 ; Reserved
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD 0 ; Reserved
+ DCD SPI1_IRQHandler ; SPI1
+ DCD 0 ; Reserved
+ DCD USART1_IRQHandler ; USART1
+
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_5_IRQHandler [WEAK]
+ EXPORT ADC1_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_IRQHandler
+ADC1_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM14_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+SPI1_IRQHandler
+USART1_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f042x6.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f042x6.s new file mode 100644 index 0000000..8ff3823 --- /dev/null +++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f042x6.s @@ -0,0 +1,275 @@ +;*******************************************************************************
+;* File Name : startup_stm32f042x6.s
+;* Author : MCD Application Team
+;* Description : STM32F042x4/STM32F042x6 devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_CRS_IRQHandler ; RCC and CRS
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD TSC_IRQHandler ; TS
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_IRQHandler ; ADC1
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM14_IRQHandler ; TIM14
+ DCD 0 ; Reserved
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD 0 ; Reserved
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD 0 ; Reserved
+ DCD CEC_CAN_IRQHandler ; CEC and CAN
+ DCD USB_IRQHandler ; USB
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+
+
+
+ LDR R0, =__initial_sp ; set stack pointer
+ MSR MSP, R0
+
+;;Check if boot space corresponds to test memory
+
+ LDR R0,=0x00000004
+ LDR R1, [R0]
+ LSRS R1, R1, #24
+ LDR R2,=0x1F
+ CMP R1, R2
+
+ BNE ApplicationStart
+
+;; SYSCFG clock enable
+
+ LDR R0,=0x40021018
+ LDR R1,=0x00000001
+ STR R1, [R0]
+
+;; Set CFGR1 register with flash memory remap at address 0
+
+ LDR R0,=0x40010000
+ LDR R1,=0x00000000
+ STR R1, [R0]
+ApplicationStart
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_VDDIO2_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_CRS_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT TSC_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_5_IRQHandler [WEAK]
+ EXPORT ADC1_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT CEC_CAN_IRQHandler [WEAK]
+ EXPORT USB_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+PVD_VDDIO2_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_CRS_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+TSC_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_IRQHandler
+ADC1_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM14_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+CEC_CAN_IRQHandler
+USB_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f048xx.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f048xx.s new file mode 100644 index 0000000..45816f9 --- /dev/null +++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f048xx.s @@ -0,0 +1,247 @@ +;*******************************************************************************
+;* File Name : startup_stm32f048xx.s
+;* Author : MCD Application Team
+;* Description : STM32F048xx devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD VDDIO2_IRQHandler ; VDDIO2 Monitor through EXTI Line 31
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_CRS_IRQHandler ; RCC and CRS
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD TSC_IRQHandler ; TS
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_IRQHandler ; ADC1
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM14_IRQHandler ; TIM14
+ DCD 0 ; Reserved
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD 0 ; Reserved
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD 0 ; Reserved
+ DCD CEC_CAN_IRQHandler ; CEC and CAN
+ DCD USB_IRQHandler ; USB
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT VDDIO2_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_CRS_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT TSC_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_5_IRQHandler [WEAK]
+ EXPORT ADC1_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT CEC_CAN_IRQHandler [WEAK]
+ EXPORT USB_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+VDDIO2_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_CRS_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+TSC_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_IRQHandler
+ADC1_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM14_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+CEC_CAN_IRQHandler
+USB_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f051x8.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f051x8.s new file mode 100644 index 0000000..783b327 --- /dev/null +++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f051x8.s @@ -0,0 +1,250 @@ +;*******************************************************************************
+;* File Name : startup_stm32f051x8.s
+;* Author : MCD Application Team
+;* Description : STM32F051x4/STM32F051x6/STM32F051x8 devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detect
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD TSC_IRQHandler ; TS
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
+ DCD 0 ; Reserved
+ DCD TIM14_IRQHandler ; TIM14
+ DCD TIM15_IRQHandler ; TIM15
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD I2C2_IRQHandler ; I2C2
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD 0 ; Reserved
+ DCD CEC_IRQHandler ; CEC
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT TSC_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_5_IRQHandler [WEAK]
+ EXPORT ADC1_COMP_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM6_DAC_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM15_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT I2C2_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT CEC_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+PVD_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+TSC_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_IRQHandler
+ADC1_COMP_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM6_DAC_IRQHandler
+TIM14_IRQHandler
+TIM15_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+CEC_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f058xx.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f058xx.s new file mode 100644 index 0000000..5a41a8e --- /dev/null +++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f058xx.s @@ -0,0 +1,248 @@ +;*******************************************************************************
+;* File Name : startup_stm32f058xx.s
+;* Author : MCD Application Team
+;* Description : STM32F058xx devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD 0 ; Reserved
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD TSC_IRQHandler ; TS
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
+ DCD 0 ; Reserved
+ DCD TIM14_IRQHandler ; TIM14
+ DCD TIM15_IRQHandler ; TIM15
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD I2C2_IRQHandler ; I2C2
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD 0 ; Reserved
+ DCD CEC_IRQHandler ; CEC
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT TSC_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_5_IRQHandler [WEAK]
+ EXPORT ADC1_COMP_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM6_DAC_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM15_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT I2C2_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT CEC_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+TSC_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_IRQHandler
+ADC1_COMP_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM6_DAC_IRQHandler
+TIM14_IRQHandler
+TIM15_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+CEC_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f070x6.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f070x6.s new file mode 100644 index 0000000..d78bb2f --- /dev/null +++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f070x6.s @@ -0,0 +1,265 @@ +;*******************************************************************************
+;* File Name : startup_stm32f070x6.s
+;* Author : MCD Application Team
+;* Description : STM32F070x4/STM32F070x6 devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD 0 ; Reserved
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD 0 ; Reserved
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_IRQHandler ; ADC1
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD 0 ; Reserved
+ DCD TIM3_IRQHandler ; TIM3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM14_IRQHandler ; TIM14
+ DCD 0 ; Reserved
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD 0 ; Reserved
+ DCD SPI1_IRQHandler ; SPI1
+ DCD 0 ; Reserved
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD USB_IRQHandler ; USB
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+
+
+
+ LDR R0, =__initial_sp ; set stack pointer
+ MSR MSP, R0
+
+;;Check if boot space corresponds to test memory
+
+ LDR R0,=0x00000004
+ LDR R1, [R0]
+ LSRS R1, R1, #24
+ LDR R2,=0x1F
+ CMP R1, R2
+
+ BNE ApplicationStart
+
+;; SYSCFG clock enable
+
+ LDR R0,=0x40021018
+ LDR R1,=0x00000001
+ STR R1, [R0]
+
+;; Set CFGR1 register with flash memory remap at address 0
+
+ LDR R0,=0x40010000
+ LDR R1,=0x00000000
+ STR R1, [R0]
+ApplicationStart
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_5_IRQHandler [WEAK]
+ EXPORT ADC1_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT USB_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_IRQHandler
+ADC1_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM3_IRQHandler
+TIM14_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+SPI1_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USB_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f070xb.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f070xb.s new file mode 100644 index 0000000..3967557 --- /dev/null +++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f070xb.s @@ -0,0 +1,249 @@ +;*******************************************************************************
+;* File Name : startup_stm32f070xb.s
+;* Author : MCD Application Team
+;* Description : STM32F070x8/STM32F070xB devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD 0 ; Reserved
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD 0 ; Reserved
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_IRQHandler ; ADC1
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD 0 ; Reserved
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM6_IRQHandler ; TIM6
+ DCD TIM7_IRQHandler ; TIM7
+ DCD TIM14_IRQHandler ; TIM14
+ DCD TIM15_IRQHandler ; TIM15
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD I2C2_IRQHandler ; I2C2
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_4_IRQHandler ; USART3 & USART4
+ DCD 0 ; Reserved
+ DCD USB_IRQHandler ; USB
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_5_IRQHandler [WEAK]
+ EXPORT ADC1_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM6_IRQHandler [WEAK]
+ EXPORT TIM7_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM15_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT I2C2_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT USART3_4_IRQHandler [WEAK]
+ EXPORT USB_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_IRQHandler
+ADC1_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM3_IRQHandler
+TIM6_IRQHandler
+TIM7_IRQHandler
+TIM14_IRQHandler
+TIM15_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_4_IRQHandler
+USB_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f071xb.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f071xb.s new file mode 100644 index 0000000..b546be5 --- /dev/null +++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f071xb.s @@ -0,0 +1,254 @@ +;*******************************************************************************
+;* File Name : startup_stm32f071xb.s
+;* Author : MCD Application Team
+;* Description : STM32F071x8/STM32F071xB devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_CRS_IRQHandler ; RCC and CRS
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD TSC_IRQHandler ; TS
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7
+ DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
+ DCD TIM7_IRQHandler ; TIM7
+ DCD TIM14_IRQHandler ; TIM14
+ DCD TIM15_IRQHandler ; TIM15
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD I2C2_IRQHandler ; I2C2
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_4_IRQHandler ; USART3 & USART4
+ DCD CEC_IRQHandler ; CEC
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_VDDIO2_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_CRS_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT TSC_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_5_6_7_IRQHandler [WEAK]
+ EXPORT ADC1_COMP_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM6_DAC_IRQHandler [WEAK]
+ EXPORT TIM7_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM15_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT I2C2_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT USART3_4_IRQHandler [WEAK]
+ EXPORT CEC_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+PVD_VDDIO2_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_CRS_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+TSC_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_6_7_IRQHandler
+ADC1_COMP_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM6_DAC_IRQHandler
+TIM7_IRQHandler
+TIM14_IRQHandler
+TIM15_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_4_IRQHandler
+CEC_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f072xb.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f072xb.s new file mode 100644 index 0000000..57a8bca --- /dev/null +++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f072xb.s @@ -0,0 +1,257 @@ +;*******************************************************************************
+;* File Name : startup_stm32f072xb.s
+;* Author : MCD Application Team
+;* Description : STM32F072x8/STM32F072xB devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_CRS_IRQHandler ; RCC and CRS
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD TSC_IRQHandler ; TS
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7
+ DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
+ DCD TIM7_IRQHandler ; TIM7
+ DCD TIM14_IRQHandler ; TIM14
+ DCD TIM15_IRQHandler ; TIM15
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD I2C2_IRQHandler ; I2C2
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_4_IRQHandler ; USART3 & USART4
+ DCD CEC_CAN_IRQHandler ; CEC and CAN
+ DCD USB_IRQHandler ; USB
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_VDDIO2_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_CRS_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT TSC_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_5_6_7_IRQHandler [WEAK]
+ EXPORT ADC1_COMP_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM6_DAC_IRQHandler [WEAK]
+ EXPORT TIM7_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM15_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT I2C2_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT USART3_4_IRQHandler [WEAK]
+ EXPORT CEC_CAN_IRQHandler [WEAK]
+ EXPORT USB_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+PVD_VDDIO2_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_CRS_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+TSC_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_6_7_IRQHandler
+ADC1_COMP_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM6_DAC_IRQHandler
+TIM7_IRQHandler
+TIM14_IRQHandler
+TIM15_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_4_IRQHandler
+CEC_CAN_IRQHandler
+USB_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f078xx.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f078xx.s new file mode 100644 index 0000000..122a399 --- /dev/null +++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f078xx.s @@ -0,0 +1,257 @@ +;*******************************************************************************
+;* File Name : startup_stm32f078xx.s
+;* Author : MCD Application Team
+;* Description : STM32F078xx devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD VDDIO2_IRQHandler ; VDDIO2 Monitor through EXTI Line 31
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_CRS_IRQHandler ; RCC and CRS
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD TSC_IRQHandler ; TS
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7
+ DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
+ DCD TIM7_IRQHandler ; TIM7
+ DCD TIM14_IRQHandler ; TIM14
+ DCD TIM15_IRQHandler ; TIM15
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD I2C2_IRQHandler ; I2C2
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_4_IRQHandler ; USART3 & USART4
+ DCD CEC_CAN_IRQHandler ; CEC and CAN
+ DCD USB_IRQHandler ; USB
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT VDDIO2_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_CRS_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT TSC_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_5_6_7_IRQHandler [WEAK]
+ EXPORT ADC1_COMP_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM6_DAC_IRQHandler [WEAK]
+ EXPORT TIM7_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM15_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT I2C2_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT USART3_4_IRQHandler [WEAK]
+ EXPORT CEC_CAN_IRQHandler [WEAK]
+ EXPORT USB_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+VDDIO2_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_CRS_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+TSC_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_6_7_IRQHandler
+ADC1_COMP_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM6_DAC_IRQHandler
+TIM7_IRQHandler
+TIM14_IRQHandler
+TIM15_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_4_IRQHandler
+CEC_CAN_IRQHandler
+USB_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f091xc.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f091xc.s new file mode 100644 index 0000000..a51cc74 --- /dev/null +++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f091xc.s @@ -0,0 +1,254 @@ +;*******************************************************************************
+;* File Name : startup_stm32f091xc.s
+;* Author : MCD Application Team
+;* Description : STM32F091xc/STM32F098xc devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_CRS_IRQHandler ; RCC and CRS
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD TSC_IRQHandler ; TS
+ DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
+ DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
+ DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
+ DCD TIM7_IRQHandler ; TIM7
+ DCD TIM14_IRQHandler ; TIM14
+ DCD TIM15_IRQHandler ; TIM15
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD I2C2_IRQHandler ; I2C2
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
+ DCD CEC_CAN_IRQHandler ; CEC and CAN
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_VDDIO2_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_CRS_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT TSC_IRQHandler [WEAK]
+ EXPORT DMA1_Ch1_IRQHandler [WEAK]
+ EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
+ EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
+ EXPORT ADC1_COMP_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM6_DAC_IRQHandler [WEAK]
+ EXPORT TIM7_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM15_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT I2C2_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT USART3_8_IRQHandler [WEAK]
+ EXPORT CEC_CAN_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+PVD_VDDIO2_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_CRS_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+TSC_IRQHandler
+DMA1_Ch1_IRQHandler
+DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
+DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
+ADC1_COMP_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM6_DAC_IRQHandler
+TIM7_IRQHandler
+TIM14_IRQHandler
+TIM15_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_8_IRQHandler
+CEC_CAN_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f098xx.s b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f098xx.s new file mode 100644 index 0000000..44a03dd --- /dev/null +++ b/hid-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f098xx.s @@ -0,0 +1,254 @@ +;*******************************************************************************
+;* File Name : startup_stm32f098xx.s
+;* Author : MCD Application Team
+;* Description : STM32F098xx devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD VDDIO2_IRQHandler ; VDDIO2 Monitor through EXTI Line 31
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_CRS_IRQHandler ; RCC and CRS
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD TSC_IRQHandler ; TS
+ DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
+ DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
+ DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
+ DCD TIM7_IRQHandler ; TIM7
+ DCD TIM14_IRQHandler ; TIM14
+ DCD TIM15_IRQHandler ; TIM15
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD I2C2_IRQHandler ; I2C2
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
+ DCD CEC_CAN_IRQHandler ; CEC and CAN
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT VDDIO2_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_CRS_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT TSC_IRQHandler [WEAK]
+ EXPORT DMA1_Ch1_IRQHandler [WEAK]
+ EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
+ EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
+ EXPORT ADC1_COMP_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM6_DAC_IRQHandler [WEAK]
+ EXPORT TIM7_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM15_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT I2C2_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT USART3_8_IRQHandler [WEAK]
+ EXPORT CEC_CAN_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+VDDIO2_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_CRS_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+TSC_IRQHandler
+DMA1_Ch1_IRQHandler
+DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
+DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
+ADC1_COMP_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM6_DAC_IRQHandler
+TIM7_IRQHandler
+TIM14_IRQHandler
+TIM15_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_8_IRQHandler
+CEC_CAN_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|