1 files changed, 0 insertions, 150 deletions
diff --git a/hid-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_scale_q15.c b/hid-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_scale_q15.c
deleted file mode 100644
index f1d3063..0000000
--- a/hid-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_scale_q15.c
+++ /dev/null
@@ -1,150 +0,0 @@
-/* ----------------------------------------------------------------------
- * Project:      CMSIS DSP Library
- * Title:        arm_scale_q15.c
- * Description:  Multiplies a Q15 vector by a scalar
- *
- * $Date:        27. January 2017
- * $Revision:    V.1.5.1
- *
- * Target Processor: Cortex-M cores
- * -------------------------------------------------------------------- */
-/*
- * Copyright (C) 2010-2017 ARM Limited or its affiliates. All rights reserved.
- *
- * SPDX-License-Identifier: Apache-2.0
- *
- * Licensed under the Apache License, Version 2.0 (the License); you may
- * not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an AS IS BASIS, WITHOUT
- * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include "arm_math.h"
-
-/**
- * @ingroup groupMath
- */
-
-/**
- * @addtogroup scale
- * @{
- */
-
-/**
- * @brief Multiplies a Q15 vector by a scalar.
- * @param[in]       *pSrc points to the input vector
- * @param[in]       scaleFract fractional portion of the scale value
- * @param[in]       shift number of bits to shift the result by
- * @param[out]      *pDst points to the output vector
- * @param[in]       blockSize number of samples in the vector
- * @return none.
- *
- * <b>Scaling and Overflow Behavior:</b>
- * \par
- * The input data <code>*pSrc</code> and <code>scaleFract</code> are in 1.15 format.
- * These are multiplied to yield a 2.30 intermediate result and this is shifted with saturation to 1.15 format.
- */
-
-
-void arm_scale_q15(
-  q15_t * pSrc,
-  q15_t scaleFract,
-  int8_t shift,
-  q15_t * pDst,
-  uint32_t blockSize)
-{
-  int8_t kShift = 15 - shift;                    /* shift to apply after scaling */
-  uint32_t blkCnt;                               /* loop counter */
-
-#if defined (ARM_MATH_DSP)
-
-/* Run the below code for Cortex-M4 and Cortex-M3 */
-  q15_t in1, in2, in3, in4;
-  q31_t inA1, inA2;                              /* Temporary variables */
-  q31_t out1, out2, out3, out4;
-
-
-  /*loop Unrolling */
-  blkCnt = blockSize >> 2U;
-
-  /* First part of the processing with loop unrolling.  Compute 4 outputs at a time.
-   ** a second loop below computes the remaining 1 to 3 samples. */
-  while (blkCnt > 0U)
-  {
-    /* Reading 2 inputs from memory */
-    inA1 = *__SIMD32(pSrc)++;
-    inA2 = *__SIMD32(pSrc)++;
-
-    /* C = A * scale */
-    /* Scale the inputs and then store the 2 results in the destination buffer
-     * in single cycle by packing the outputs */
-    out1 = (q31_t) ((q15_t) (inA1 >> 16) * scaleFract);
-    out2 = (q31_t) ((q15_t) inA1 * scaleFract);
-    out3 = (q31_t) ((q15_t) (inA2 >> 16) * scaleFract);
-    out4 = (q31_t) ((q15_t) inA2 * scaleFract);
-
-    /* apply shifting */
-    out1 = out1 >> kShift;
-    out2 = out2 >> kShift;
-    out3 = out3 >> kShift;
-    out4 = out4 >> kShift;
-
-    /* saturate the output */
-    in1 = (q15_t) (__SSAT(out1, 16));
-    in2 = (q15_t) (__SSAT(out2, 16));
-    in3 = (q15_t) (__SSAT(out3, 16));
-    in4 = (q15_t) (__SSAT(out4, 16));
-
-    /* store the result to destination */
-    *__SIMD32(pDst)++ = __PKHBT(in2, in1, 16);
-    *__SIMD32(pDst)++ = __PKHBT(in4, in3, 16);
-
-    /* Decrement the loop counter */
-    blkCnt--;
-  }
-
-  /* If the blockSize is not a multiple of 4, compute any remaining output samples here.
-   ** No loop unrolling is used. */
-  blkCnt = blockSize % 0x4U;
-
-  while (blkCnt > 0U)
-  {
-    /* C = A * scale */
-    /* Scale the input and then store the result in the destination buffer. */
-    *pDst++ = (q15_t) (__SSAT(((*pSrc++) * scaleFract) >> kShift, 16));
-
-    /* Decrement the loop counter */
-    blkCnt--;
-  }
-
-#else
-
-  /* Run the below code for Cortex-M0 */
-
-  /* Initialize blkCnt with number of samples */
-  blkCnt = blockSize;
-
-  while (blkCnt > 0U)
-  {
-    /* C = A * scale */
-    /* Scale the input and then store the result in the destination buffer. */
-    *pDst++ = (q15_t) (__SSAT(((q31_t) * pSrc++ * scaleFract) >> kShift, 16));
-
-    /* Decrement the loop counter */
-    blkCnt--;
-  }
-
-#endif /* #if defined (ARM_MATH_DSP) */
-
-}
-
-/**
- * @} end of scale group
- */