diff options
Diffstat (limited to 'fw/midi-dials/Inc')
| -rw-r--r-- | fw/midi-dials/Inc/curelib_inc/curebuffer.h | 76 | ||||
| -rw-r--r-- | fw/midi-dials/Inc/curelib_inc/curemisc.h | 49 | ||||
| -rw-r--r-- | fw/midi-dials/Inc/device_conf.h | 20 | ||||
| -rw-r--r-- | fw/midi-dials/Inc/main.h | 71 | ||||
| -rw-r--r-- | fw/midi-dials/Inc/stm32f0xx_hal_conf.h | 319 | ||||
| -rw-r--r-- | fw/midi-dials/Inc/stm32f0xx_it.h | 68 | ||||
| -rw-r--r-- | fw/midi-dials/Inc/usb_device.h | 116 | ||||
| -rw-r--r-- | fw/midi-dials/Inc/usbd_conf.h | 203 | ||||
| -rw-r--r-- | fw/midi-dials/Inc/usbd_desc.h | 156 | ||||
| -rw-r--r-- | fw/midi-dials/Inc/usbd_midi_if.h | 79 |
10 files changed, 1157 insertions, 0 deletions
diff --git a/fw/midi-dials/Inc/curelib_inc/curebuffer.h b/fw/midi-dials/Inc/curelib_inc/curebuffer.h new file mode 100644 index 0000000..2802c61 --- /dev/null +++ b/fw/midi-dials/Inc/curelib_inc/curebuffer.h @@ -0,0 +1,76 @@ +/*
+ *******************************************************************************
+ * [curebuffer.h]
+ * This module is for FIFO buffer.
+ *
+ * This program is under the terms of the GPLv3.
+ * https://www.gnu.org/licenses/gpl-3.0.html
+ *
+ * Copyright(c) 2017 Keshikan (www.keshikan.net)
+ *******************************************************************************
+ */
+
+#ifndef CUREBUFFER_H_
+#define CUREBUFFER_H_
+
+#include <stdint.h>
+
+typedef enum{
+ BUFFER_FAILURE,BUFFER_SUCCESS
+}BUFFER_STATUS;
+
+typedef struct{
+ uint16_t idx_front;
+ uint16_t idx_rear;
+ uint16_t length;
+ uint8_t *buffer;
+}RingBufferU8;
+
+typedef struct{
+ uint16_t idx_front;
+ uint16_t idx_rear;
+ uint16_t length;
+ int16_t *buffer;
+}RingBuffer16;
+
+typedef struct{
+ uint16_t idx_front;
+ uint16_t idx_rear;
+ uint16_t length;
+ uint32_t *buffer;
+}RingBuffer32;
+
+
+/////////////////////////////
+//methods for uint8_t FIFO.
+/////////////////////////////
+extern BUFFER_STATUS cureRingBufferU8Init(RingBufferU8 *rbuf, uint16_t buflen);
+extern BUFFER_STATUS cureRingBufferU8Free(RingBufferU8 *rbuf);
+extern BUFFER_STATUS cureRingBufferU8Enqueue(RingBufferU8 *rbuf, uint8_t *inputc);
+extern BUFFER_STATUS cureRingBufferU8Dequeue(RingBufferU8 *rbuf, uint8_t *ret);
+
+/////////////////////////////
+//methods for int16_t FIFO.
+/////////////////////////////
+extern BUFFER_STATUS cureRingBuffer16Init(RingBuffer16 *rbuf, uint16_t buflen);
+extern BUFFER_STATUS cureRingBuffer16Free(RingBuffer16 *rbuf);
+extern BUFFER_STATUS cureRingBuffer16Enqueue(RingBuffer16 *rbuf, int16_t *inputc);
+extern BUFFER_STATUS cureRingBuffer16EnqueueIgnoreErr(RingBuffer16 *rbuf, int16_t *inputc);
+extern BUFFER_STATUS cureRingBuffer16Dequeue(RingBuffer16 *rbuf, int16_t *ret);
+extern BUFFER_STATUS cureRingBuffer16GetElement(RingBuffer16 *rbuf, int16_t *ret, uint16_t delaynum, uint16_t length);
+
+/////////////////////////////
+//methods for uint32_t FIFO.
+/////////////////////////////
+extern BUFFER_STATUS cureRingBufferU32Init(RingBuffer32 *rbuf, uint16_t buflen);
+extern BUFFER_STATUS cureRingBufferU32Free(RingBuffer32 *rbuf);
+extern BUFFER_STATUS cureRingBufferU32Enqueue(RingBuffer32 *rbuf, uint32_t *inputc);
+extern BUFFER_STATUS cureRingBufferU32EnqueueIgnoreErr(RingBuffer32 *rbuf, uint32_t *inputc);
+extern BUFFER_STATUS cureRingBufferU32Dequeue(RingBuffer32 *rbuf, uint32_t *ret);
+extern BUFFER_STATUS cureRingBufferU32GetElement(RingBuffer32 *rbuf, uint32_t *ret, uint16_t delaynum, uint16_t delay_buffer_length);
+
+
+//debug
+extern uint16_t _cureRingBufferU8GetUsedSize(RingBufferU8 *rbuf);
+
+#endif /* CUREBUFFER_H_ */
diff --git a/fw/midi-dials/Inc/curelib_inc/curemisc.h b/fw/midi-dials/Inc/curelib_inc/curemisc.h new file mode 100644 index 0000000..5c924e2 --- /dev/null +++ b/fw/midi-dials/Inc/curelib_inc/curemisc.h @@ -0,0 +1,49 @@ +/*
+ *******************************************************************************
+ * [curemisc.h]
+ *
+ * This program is under the terms of the GPLv3.
+ * https://www.gnu.org/licenses/gpl-3.0.html
+ *
+ * Copyright(c) 2017 Keshikan (www.keshikan.net)
+ *******************************************************************************
+ */
+
+#ifndef _CUREMISC_H_
+#define _CUREMISC_H_
+
+
+#include <stdbool.h>
+#include <stdint.h>
+
+
+#ifndef BOOL
+ #define BOOL bool
+ #define TRUE true
+ #define FALSE false
+#endif
+
+
+//LO(HI)WORD: return lower(higher) 16bit of 32bit
+//LO(HI)BYTE: return lower(higher) 4bit of 8bit
+#ifndef LOWORD
+ #define LOWORD(n) ( (uint16_t)(n) )
+#endif
+
+#ifndef HIWORD
+ #define HIWORD(n) ( (uint16_t)(((uint32_t)(n) >> 16) & 0xFFFF) )
+#endif
+
+#ifndef LOBYTE
+ #define LOBYTE(n) ( ((uint8_t)(n)) & 0x0F )
+#endif
+
+#ifndef HIBYTE
+ #define HIBYTE(n) ( (uint8_t)(((n) >> 4) & 0x0F) )
+#endif
+
+typedef enum{
+ FUNC_ERROR,FUNC_SUCCESS
+}FUNC_STATUS;
+
+#endif
diff --git a/fw/midi-dials/Inc/device_conf.h b/fw/midi-dials/Inc/device_conf.h new file mode 100644 index 0000000..849b42e --- /dev/null +++ b/fw/midi-dials/Inc/device_conf.h @@ -0,0 +1,20 @@ +/*
+ * device_conf.h
+ *
+ * Created on: 2018/07/03
+ * Author: Keshikan
+ */
+
+#ifndef DEVICE_CONF_H_
+#define DEVICE_CONF_H_
+/*
+#define LED_POW_GPIO GPIOA
+#define LED_POW_PIN GPIO_PIN_15
+
+#define LED_FAULT_GPIO GPIOA
+#define LED_FAULT_PIN GPIO_PIN_10
+
+#define BUTTON_GPIO GPIOA
+#define BUTTON_PIN GPIO_PIN_7
+*/
+#endif /* DEVICE_CONF_H_ */
diff --git a/fw/midi-dials/Inc/main.h b/fw/midi-dials/Inc/main.h new file mode 100644 index 0000000..a80f8f4 --- /dev/null +++ b/fw/midi-dials/Inc/main.h @@ -0,0 +1,71 @@ +/* USER CODE BEGIN Header */
+/**
+ ******************************************************************************
+ * @file : main.h
+ * @brief : Header for main.c file.
+ * This file contains the common defines of the application.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2020 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __MAIN_H
+#define __MAIN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void Error_Handler(void);
+
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+/* Private defines -----------------------------------------------------------*/
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MAIN_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/fw/midi-dials/Inc/stm32f0xx_hal_conf.h b/fw/midi-dials/Inc/stm32f0xx_hal_conf.h new file mode 100644 index 0000000..78c43f6 --- /dev/null +++ b/fw/midi-dials/Inc/stm32f0xx_hal_conf.h @@ -0,0 +1,319 @@ +/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_conf.h
+ * @brief HAL configuration file.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_CONF_H
+#define __STM32F0xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+ * @brief This is the list of modules to be used in the HAL driver
+ */
+#define HAL_MODULE_ENABLED
+ #define HAL_ADC_MODULE_ENABLED
+/*#define HAL_CRYP_MODULE_ENABLED */
+/*#define HAL_CAN_MODULE_ENABLED */
+/*#define HAL_CEC_MODULE_ENABLED */
+/*#define HAL_COMP_MODULE_ENABLED */
+/*#define HAL_CRC_MODULE_ENABLED */
+/*#define HAL_CRYP_MODULE_ENABLED */
+/*#define HAL_TSC_MODULE_ENABLED */
+/*#define HAL_DAC_MODULE_ENABLED */
+/*#define HAL_I2S_MODULE_ENABLED */
+/*#define HAL_IWDG_MODULE_ENABLED */
+/*#define HAL_LCD_MODULE_ENABLED */
+/*#define HAL_LPTIM_MODULE_ENABLED */
+/*#define HAL_RNG_MODULE_ENABLED */
+/*#define HAL_RTC_MODULE_ENABLED */
+/*#define HAL_SPI_MODULE_ENABLED */
+/*#define HAL_TIM_MODULE_ENABLED */
+/*#define HAL_UART_MODULE_ENABLED */
+/*#define HAL_USART_MODULE_ENABLED */
+/*#define HAL_IRDA_MODULE_ENABLED */
+/*#define HAL_SMARTCARD_MODULE_ENABLED */
+/*#define HAL_SMBUS_MODULE_ENABLED */
+/*#define HAL_WWDG_MODULE_ENABLED */
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+ * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSE is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+/**
+ * @brief In the following line adjust the External High Speed oscillator (HSE) Startup
+ * Timeout value
+ */
+#if !defined (HSE_STARTUP_TIMEOUT)
+ #define HSE_STARTUP_TIMEOUT ((uint32_t)100) /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal High Speed oscillator (HSI) value.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSI is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup
+ * Timeout value
+ */
+#if !defined (HSI_STARTUP_TIMEOUT)
+ #define HSI_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSI start up */
+#endif /* HSI_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal High Speed oscillator for ADC (HSI14) value.
+ */
+#if !defined (HSI14_VALUE)
+#define HSI14_VALUE ((uint32_t)14000000) /*!< Value of the Internal High Speed oscillator for ADC in Hz.
+ The real value may vary depending on the variations
+ in voltage and temperature. */
+#endif /* HSI14_VALUE */
+
+/**
+ * @brief Internal High Speed oscillator for USB (HSI48) value.
+ */
+#if !defined (HSI48_VALUE)
+#define HSI48_VALUE ((uint32_t)48000000) /*!< Value of the Internal High Speed oscillator for USB in Hz.
+ The real value may vary depending on the variations
+ in voltage and temperature. */
+#endif /* HSI48_VALUE */
+
+/**
+ * @brief Internal Low Speed oscillator (LSI) value.
+ */
+#if !defined (LSI_VALUE)
+ #define LSI_VALUE ((uint32_t)40000)
+#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+ The real value may vary depending on the variations
+ in voltage and temperature. */
+/**
+ * @brief External Low Speed oscillator (LSI) value.
+ */
+#if !defined (LSE_VALUE)
+ #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+#if !defined (LSE_STARTUP_TIMEOUT)
+ #define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+ === you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+ * @brief This is the HAL system configuration section
+ */
+#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */
+#define TICK_INT_PRIORITY ((uint32_t)0) /*!< tick interrupt priority (lowest by default) */
+ /* Warning: Must be set to higher priority for HAL_Delay() */
+ /* and HAL_GetTick() usage under interrupt context */
+#define USE_RTOS 0
+#define PREFETCH_ENABLE 1
+#define INSTRUCTION_CACHE_ENABLE 0
+#define DATA_CACHE_ENABLE 0
+#define USE_SPI_CRC 0U
+
+#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
+#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */
+#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */
+#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
+#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
+#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
+#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */
+#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
+#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
+#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
+#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
+#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
+#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
+#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
+#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
+#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
+#define USE_HAL_TSC_REGISTER_CALLBACKS 0U /* TSC register callback disabled */
+#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
+
+/* ########################## Assert Selection ############################## */
+/**
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * HAL drivers code
+ */
+/* #define USE_FULL_ASSERT 1U */
+
+/* Includes ------------------------------------------------------------------*/
+/**
+ * @brief Include module's header file
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32f0xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32f0xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+ #include "stm32f0xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+ #include "stm32f0xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32f0xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32f0xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+ #include "stm32f0xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f0xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+ #include "stm32f0xx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32f0xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32f0xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32f0xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f0xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f0xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f0xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f0xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f0xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f0xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f0xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f0xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32f0xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f0xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f0xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_TSC_MODULE_ENABLED
+ #include "stm32f0xx_hal_tsc.h"
+#endif /* HAL_TSC_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f0xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f0xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f0xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(uint8_t* file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_CONF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/fw/midi-dials/Inc/stm32f0xx_it.h b/fw/midi-dials/Inc/stm32f0xx_it.h new file mode 100644 index 0000000..daef239 --- /dev/null +++ b/fw/midi-dials/Inc/stm32f0xx_it.h @@ -0,0 +1,68 @@ +/* USER CODE BEGIN Header */
+/**
+ ******************************************************************************
+ * @file stm32f0xx_it.h
+ * @brief This file contains the headers of the interrupt handlers.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2020 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_IT_H
+#define __STM32F0xx_IT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void SVC_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+void DMA1_Channel1_IRQHandler(void);
+void USB_IRQHandler(void);
+
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_IT_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/fw/midi-dials/Inc/usb_device.h b/fw/midi-dials/Inc/usb_device.h new file mode 100644 index 0000000..672b0d4 --- /dev/null +++ b/fw/midi-dials/Inc/usb_device.h @@ -0,0 +1,116 @@ +/**
+ ******************************************************************************
+ * @file : usb_device.h
+ * @version : v2.0_Cube
+ * @brief : Header for usb_device.c file.
+ ******************************************************************************
+ * This notice applies to any and all portions of this file
+ * that are not between comment pairs USER CODE BEGIN and
+ * USER CODE END. Other portions of this file, whether
+ * inserted by the user or by software development tools
+ * are owned by their respective copyright owners.
+ *
+ * Copyright (c) 2018 STMicroelectronics International N.V.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_DEVICE__H__
+#define __USB_DEVICE__H__
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx.h"
+#include "stm32f0xx_hal.h"
+#include "usbd_def.h"
+
+/* USER CODE BEGIN INCLUDE */
+
+extern void MX_USB_MIDI_INIT(void);
+
+/* USER CODE END INCLUDE */
+
+/** @addtogroup USBD_OTG_DRIVER
+ * @{
+ */
+
+/** @defgroup USBD_DEVICE USBD_DEVICE
+ * @brief Device file for Usb otg low level driver.
+ * @{
+ */
+
+/** @defgroup USBD_DEVICE_Exported_Variables USBD_DEVICE_Exported_Variables
+ * @brief Public variables.
+ * @{
+ */
+
+/** USB device core handle. */
+extern USBD_HandleTypeDef hUsbDeviceFS;
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DEVICE_Exported_FunctionsPrototype USBD_DEVICE_Exported_FunctionsPrototype
+ * @brief Declaration of public functions for Usb device.
+ * @{
+ */
+
+/** USB Device initialization function. */
+void MX_USB_DEVICE_Init(void);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USB_DEVICE__H__ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/fw/midi-dials/Inc/usbd_conf.h b/fw/midi-dials/Inc/usbd_conf.h new file mode 100644 index 0000000..fcece3a --- /dev/null +++ b/fw/midi-dials/Inc/usbd_conf.h @@ -0,0 +1,203 @@ +/**
+ ******************************************************************************
+ * @file : usbd_conf.h
+ * @version : v2.0_Cube
+ * @brief : Header for usbd_conf.c file.
+ ******************************************************************************
+ * This notice applies to any and all portions of this file
+ * that are not between comment pairs USER CODE BEGIN and
+ * USER CODE END. Other portions of this file, whether
+ * inserted by the user or by software development tools
+ * are owned by their respective copyright owners.
+ *
+ * Copyright (c) 2018 STMicroelectronics International N.V.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_CONF__H__
+#define __USBD_CONF__H__
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "stm32f0xx.h"
+#include "stm32f0xx_hal.h"
+#include "usbd_def.h"
+
+/* USER CODE BEGIN INCLUDE */
+
+/* USER CODE END INCLUDE */
+
+/** @addtogroup USBD_OTG_DRIVER
+ * @{
+ */
+
+/** @defgroup USBD_CONF USBD_CONF
+ * @brief Configuration file for Usb otg low level driver.
+ * @{
+ */
+
+/** @defgroup USBD_CONF_Exported_Variables USBD_CONF_Exported_Variables
+ * @brief Public variables.
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CONF_Exported_Defines USBD_CONF_Exported_Defines
+ * @brief Defines for configuration of the Usb device.
+ * @{
+ */
+
+/*---------- -----------*/
+#define USBD_MAX_NUM_INTERFACES 1
+/*---------- -----------*/
+#define USBD_MAX_NUM_CONFIGURATION 1
+/*---------- -----------*/
+#define USBD_MAX_STR_DESC_SIZ 512
+/*---------- -----------*/
+#define USBD_SUPPORT_USER_STRING 0
+/*---------- -----------*/
+#define USBD_DEBUG_LEVEL 0
+/*---------- -----------*/
+#define USBD_SELF_POWERED 1
+/*---------- -----------*/
+#define MAX_STATIC_ALLOC_SIZE 512
+
+/****************************************/
+/* #define for FS and HS identification */
+#define DEVICE_FS 0
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CONF_Exported_Macros USBD_CONF_Exported_Macros
+ * @brief Aliases.
+ * @{
+ */
+
+/* Memory management macros */
+
+/** Alias for memory allocation. */
+#define USBD_malloc (uint32_t *)USBD_static_malloc
+
+/** Alias for memory release. */
+#define USBD_free USBD_static_free
+
+/** Alias for memory set. */
+#define USBD_memset /* Not used */
+
+/** Alias for memory copy. */
+#define USBD_memcpy /* Not used */
+
+/** Alias for delay. */
+#define USBD_Delay HAL_Delay
+
+/* DEBUG macros */
+
+#if (USBD_DEBUG_LEVEL > 0)
+#define USBD_UsrLog(...) printf(__VA_ARGS__);\
+ printf("\n");
+#else
+#define USBD_UsrLog(...)
+#endif
+
+#if (USBD_DEBUG_LEVEL > 1)
+
+#define USBD_ErrLog(...) printf("ERROR: ") ;\
+ printf(__VA_ARGS__);\
+ printf("\n");
+#else
+#define USBD_ErrLog(...)
+#endif
+
+#if (USBD_DEBUG_LEVEL > 2)
+#define USBD_DbgLog(...) printf("DEBUG : ") ;\
+ printf(__VA_ARGS__);\
+ printf("\n");
+#else
+#define USBD_DbgLog(...)
+#endif
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CONF_Exported_Types USBD_CONF_Exported_Types
+ * @brief Types.
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CONF_Exported_FunctionsPrototype USBD_CONF_Exported_FunctionsPrototype
+ * @brief Declaration of public functions for Usb device.
+ * @{
+ */
+
+/* Exported functions -------------------------------------------------------*/
+void *USBD_static_malloc(uint32_t size);
+void USBD_static_free(void *p);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_CONF__H__ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/fw/midi-dials/Inc/usbd_desc.h b/fw/midi-dials/Inc/usbd_desc.h new file mode 100644 index 0000000..9abf0af --- /dev/null +++ b/fw/midi-dials/Inc/usbd_desc.h @@ -0,0 +1,156 @@ +/**
+ ******************************************************************************
+ * @file : usbd_desc.h
+ * @version : v2.0_Cube
+ * @brief : Header for usbd_desc.c file.
+ ******************************************************************************
+ * This notice applies to any and all portions of this file
+ * that are not between comment pairs USER CODE BEGIN and
+ * USER CODE END. Other portions of this file, whether
+ * inserted by the user or by software development tools
+ * are owned by their respective copyright owners.
+ *
+ * Copyright (c) 2018 STMicroelectronics International N.V.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_DESC__H__
+#define __USBD_DESC__H__
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_def.h"
+
+/* USER CODE BEGIN INCLUDE */
+
+/* USER CODE END INCLUDE */
+
+/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_DESC USBD_DESC
+ * @brief Usb device descriptors module.
+ * @{
+ */
+
+/** @defgroup USBD_DESC_Exported_Defines USBD_DESC_Exported_Defines
+ * @brief Defines.
+ * @{
+ */
+
+/* USER CODE BEGIN EXPORTED_DEFINES */
+
+/* USER CODE END EXPORTED_DEFINES */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Exported_TypesDefinitions USBD_DESC_Exported_TypesDefinitions
+ * @brief Types.
+ * @{
+ */
+
+/* USER CODE BEGIN EXPORTED_TYPES */
+
+/* USER CODE END EXPORTED_TYPES */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Exported_Macros USBD_DESC_Exported_Macros
+ * @brief Aliases.
+ * @{
+ */
+
+/* USER CODE BEGIN EXPORTED_MACRO */
+
+/* USER CODE END EXPORTED_MACRO */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Exported_Variables USBD_DESC_Exported_Variables
+ * @brief Public variables.
+ * @{
+ */
+
+/** Descriptor for the Usb device. */
+extern USBD_DescriptorsTypeDef FS_Desc;
+
+/* USER CODE BEGIN EXPORTED_VARIABLES */
+
+/* USER CODE END EXPORTED_VARIABLES */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Exported_FunctionsPrototype USBD_DESC_Exported_FunctionsPrototype
+ * @brief Public functions declaration.
+ * @{
+ */
+
+/* USER CODE BEGIN EXPORTED_FUNCTIONS */
+
+/* USER CODE END EXPORTED_FUNCTIONS */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_DESC__H__ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/fw/midi-dials/Inc/usbd_midi_if.h b/fw/midi-dials/Inc/usbd_midi_if.h new file mode 100644 index 0000000..3fe855c --- /dev/null +++ b/fw/midi-dials/Inc/usbd_midi_if.h @@ -0,0 +1,79 @@ +/**
+ ******************************************************************************
+ * @file : usbd_midi_if.h
+ * @brief : Header for usbd_midi_if file.
+ ******************************************************************************
+*/
+
+#ifndef __USBD_MIDI_IF_H
+#define __USBD_MIDI_IF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "usbd_midi.h"
+#include "usbd_desc.h"
+#include "curemisc.h"
+
+#include "curebuffer.h"
+
+#define MIDI_BUFFER_LENGTH (1024)
+#define MIDI_SENDDATA_MAX (64)
+
+////public typedef////
+typedef enum{
+ START_ANALYSIS, // Initial Status, including exception.
+ WAIT_DATA1, // Waiting data byte(1st byte)
+ WAIT_DATA2, // Waiting data byte(2nd byte)
+ WAIT_SYSTEM_DATA, // Waiting data byte(system exclusive)
+ END_ANALYSIS // Analysis is ended.
+}AnalysisStatus;
+
+typedef enum{
+ MSG_NOTHING, // Exception(can't resolved, missing data, etc.)
+ MSG_SYSEX, // System Exclusive message
+ MSG_ONE_BYTE,
+ MSG_TWO_BYTE,
+ MSG_THREE_BYTE,
+}EventType;
+
+typedef struct{
+ uint8_t length;
+ uint8_t midi_byte[MIDI_SENDDATA_MAX]; //data_byte[0]=MSB, [1]=LSB, [2]=OTHER...(e.g. sysEx, Control Change...)
+}MIDIEvent;
+
+typedef struct{
+ AnalysisStatus stat;
+ EventType type;
+ bool is_system_common;
+ uint8_t data_idx;
+}MidiAnalysisStatus;
+
+extern USBD_MIDI_ItfTypeDef USBD_Interface_fops_FS;
+
+//for cure series
+extern FUNC_STATUS midiInit();//call before use functions in this files.
+extern FUNC_STATUS midiGetFromUsbRx(uint8_t ch, uint8_t* dat);
+extern FUNC_STATUS midiGetFromJackRx(uint8_t cable_num);
+extern FUNC_STATUS midiSetFromJackRx(uint8_t cable_num, uint8_t* dat);
+extern bool isUsbRxBufEmpty(uint8_t ch);
+extern bool isJackRxBufEmpty(uint8_t ch);
+extern bool isRxBufEmpty();
+
+//USB function
+extern void sendMidiMessage(uint8_t *msg, uint16_t size);
+extern uint8_t USBD_MIDI_SendData(USBD_HandleTypeDef *pdev, uint8_t *pBuf, uint16_t length);
+
+
+// Call in main loop
+extern void midiProcess(void);
+extern void USBD_MIDI_SendPacket(void);
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_MIDI_IF_H */
|