diff options
Diffstat (limited to 'fw/midi-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rtc_ex.c')
| -rw-r--r-- | fw/midi-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rtc_ex.c | 1600 |
1 files changed, 1600 insertions, 0 deletions
diff --git a/fw/midi-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rtc_ex.c b/fw/midi-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rtc_ex.c new file mode 100644 index 0000000..59888c1 --- /dev/null +++ b/fw/midi-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rtc_ex.c @@ -0,0 +1,1600 @@ +/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_rtc_ex.c
+ * @author MCD Application Team
+ * @brief Extended RTC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Real Time Clock (RTC) Extended peripheral:
+ * + RTC Time Stamp functions
+ * + RTC Tamper functions
+ * + RTC Wake-up functions
+ * + Extended Control functions
+ * + Extended RTC features functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (+) Enable the RTC domain access.
+ (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour
+ format using the HAL_RTC_Init() function.
+
+ *** RTC Wake-up configuration ***
+ ================================
+ [..]
+ (+) To configure the RTC Wakeup Clock source and Counter use the HAL_RTCEx_SetWakeUpTimer()
+ function. You can also configure the RTC Wakeup timer with interrupt mode
+ using the HAL_RTCEx_SetWakeUpTimer_IT() function.
+ (+) To read the RTC WakeUp Counter register, use the HAL_RTCEx_GetWakeUpTimer()
+ function.
+ (@) Not available on F030x4/x6/x8 and F070x6
+
+ *** TimeStamp configuration ***
+ ===============================
+ [..]
+ (+) Configure the RTC_AF trigger and enable the RTC TimeStamp using the
+ HAL_RTCEx_SetTimeStamp() function. You can also configure the RTC TimeStamp with
+ interrupt mode using the HAL_RTCEx_SetTimeStamp_IT() function.
+ (+) To read the RTC TimeStamp Time and Date register, use the HAL_RTCEx_GetTimeStamp()
+ function.
+
+ *** Tamper configuration ***
+ ============================
+ [..]
+ (+) Enable the RTC Tamper and configure the Tamper filter count, trigger Edge
+ or Level according to the Tamper filter (if equal to 0 Edge else Level)
+ value, sampling frequency, precharge or discharge and Pull-UP using the
+ HAL_RTCEx_SetTamper() function. You can configure RTC Tamper in interrupt
+ mode using HAL_RTCEx_SetTamper_IT() function.
+
+ *** Backup Data Registers configuration ***
+ ===========================================
+ [..]
+ (+) To write to the RTC Backup Data registers, use the HAL_RTCEx_BKUPWrite()
+ function.
+ (+) To read the RTC Backup Data registers, use the HAL_RTCEx_BKUPRead()
+ function.
+ (@) Not available on F030x6/x8/xC and F070x6/xB (F0xx Value Line devices)
+
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+
+
+/** @addtogroup RTCEx
+ * @brief RTC Extended HAL module driver
+ * @{
+ */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions ---------------------------------------------------------*/
+
+/** @addtogroup RTCEx_Exported_Functions
+ * @{
+ */
+
+
+/** @addtogroup RTCEx_Exported_Functions_Group1
+ * @brief RTC TimeStamp and Tamper functions
+ *
+@verbatim
+ ===============================================================================
+ ##### RTC TimeStamp and Tamper functions #####
+ ===============================================================================
+
+ [..] This section provides functions allowing to configure TimeStamp feature
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Set TimeStamp.
+ * @note This API must be called before enabling the TimeStamp feature.
+ * @param hrtc RTC handle
+ * @param TimeStampEdge Specifies the pin edge on which the TimeStamp is
+ * activated.
+ * This parameter can be one of the following values:
+ * @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the
+ * rising edge of the related pin.
+ * @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the
+ * falling edge of the related pin.
+ * @param RTC_TimeStampPin specifies the RTC TimeStamp Pin.
+ * This parameter can be one of the following values:
+ * @arg RTC_TIMESTAMPPIN_DEFAULT: PC13 is selected as RTC TimeStamp Pin.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge));
+ assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Get the RTC_CR register and clear the bits to be configured */
+ tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));
+
+ tmpreg |= TimeStampEdge;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Configure the Time Stamp TSEDGE and Enable bits */
+ hrtc->Instance->CR = (uint32_t)tmpreg;
+
+ __HAL_RTC_TIMESTAMP_ENABLE(hrtc);
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Set TimeStamp with Interrupt.
+ * @param hrtc RTC handle
+ * @note This API must be called before enabling the TimeStamp feature.
+ * @param TimeStampEdge Specifies the pin edge on which the TimeStamp is
+ * activated.
+ * This parameter can be one of the following values:
+ * @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the
+ * rising edge of the related pin.
+ * @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the
+ * falling edge of the related pin.
+ * @param RTC_TimeStampPin Specifies the RTC TimeStamp Pin.
+ * This parameter can be one of the following values:
+ * @arg RTC_TIMESTAMPPIN_DEFAULT: PC13 is selected as RTC TimeStamp Pin.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge));
+ assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Get the RTC_CR register and clear the bits to be configured */
+ tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));
+
+ tmpreg |= TimeStampEdge;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Configure the Time Stamp TSEDGE and Enable bits */
+ hrtc->Instance->CR = (uint32_t)tmpreg;
+
+ __HAL_RTC_TIMESTAMP_ENABLE(hrtc);
+
+ /* Enable IT timestamp */
+ __HAL_RTC_TIMESTAMP_ENABLE_IT(hrtc, RTC_IT_TS);
+
+ /* RTC timestamp Interrupt Configuration: EXTI configuration */
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT();
+
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactivate TimeStamp.
+ * @param hrtc RTC handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* In case of interrupt mode is used, the interrupt source must disabled */
+ __HAL_RTC_TIMESTAMP_DISABLE_IT(hrtc, RTC_IT_TS);
+
+ /* Get the RTC_CR register and clear the bits to be configured */
+ tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));
+
+ /* Configure the Time Stamp TSEDGE and Enable bits */
+ hrtc->Instance->CR = (uint32_t)tmpreg;
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Get the RTC TimeStamp value.
+ * @param hrtc RTC handle
+
+ * @param sTimeStamp Pointer to Time structure
+ * @param sTimeStampDate Pointer to Date structure
+ * @param Format specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * @arg RTC_FORMAT_BIN: Binary data format
+ * @arg RTC_FORMAT_BCD: BCD data format
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format)
+{
+ uint32_t tmptime = 0U, tmpdate = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+
+ /* Get the TimeStamp time and date registers values */
+ tmptime = (uint32_t)(hrtc->Instance->TSTR & RTC_TR_RESERVED_MASK);
+ tmpdate = (uint32_t)(hrtc->Instance->TSDR & RTC_DR_RESERVED_MASK);
+
+ /* Fill the Time structure fields with the read parameters */
+ sTimeStamp->Hours = (uint8_t)((tmptime & (RTC_TR_HT | RTC_TR_HU)) >> 16U);
+ sTimeStamp->Minutes = (uint8_t)((tmptime & (RTC_TR_MNT | RTC_TR_MNU)) >> 8U);
+ sTimeStamp->Seconds = (uint8_t)(tmptime & (RTC_TR_ST | RTC_TR_SU));
+ sTimeStamp->TimeFormat = (uint8_t)((tmptime & (RTC_TR_PM)) >> 16U);
+ sTimeStamp->SubSeconds = (uint32_t) hrtc->Instance->TSSSR;
+
+ /* Fill the Date structure fields with the read parameters */
+ sTimeStampDate->Year = 0;
+ sTimeStampDate->Month = (uint8_t)((tmpdate & (RTC_DR_MT | RTC_DR_MU)) >> 8U);
+ sTimeStampDate->Date = (uint8_t)(tmpdate & (RTC_DR_DT | RTC_DR_DU));
+ sTimeStampDate->WeekDay = (uint8_t)((tmpdate & (RTC_DR_WDU)) >> 13U);
+
+ /* Check the input parameters format */
+ if (Format == RTC_FORMAT_BIN)
+ {
+ /* Convert the TimeStamp structure parameters to Binary format */
+ sTimeStamp->Hours = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Hours);
+ sTimeStamp->Minutes = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Minutes);
+ sTimeStamp->Seconds = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Seconds);
+
+ /* Convert the DateTimeStamp structure parameters to Binary format */
+ sTimeStampDate->Month = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Month);
+ sTimeStampDate->Date = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Date);
+ sTimeStampDate->WeekDay = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->WeekDay);
+ }
+
+ /* Clear the TIMESTAMP Flag */
+ __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Set Tamper
+ * @note By calling this API we disable the tamper interrupt for all tampers.
+ * @param hrtc RTC handle
+ * @param sTamper Pointer to Tamper Structure.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_TAMPER(sTamper->Tamper));
+ assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger));
+ assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter));
+ assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency));
+ assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration));
+ assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp));
+ assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ if (sTamper->Trigger != RTC_TAMPERTRIGGER_RISINGEDGE)
+ {
+ sTamper->Trigger = (uint32_t)(sTamper->Tamper << 1U);
+ }
+
+ tmpreg = ((uint32_t)sTamper->Tamper | (uint32_t)sTamper->Trigger | (uint32_t)sTamper->Filter | \
+ (uint32_t)sTamper->SamplingFrequency | (uint32_t)sTamper->PrechargeDuration | \
+ (uint32_t)sTamper->TamperPullUp | sTamper->TimeStampOnTamperDetection);
+
+ hrtc->Instance->TAFCR &= (uint32_t)~((uint32_t)sTamper->Tamper | (uint32_t)(sTamper->Tamper << 1U) | (uint32_t)RTC_TAFCR_TAMPTS | \
+ (uint32_t)RTC_TAFCR_TAMPFREQ | (uint32_t)RTC_TAFCR_TAMPFLT | (uint32_t)RTC_TAFCR_TAMPPRCH | \
+ (uint32_t)RTC_TAFCR_TAMPPUDIS | (uint32_t)RTC_TAFCR_TAMPIE);
+
+ hrtc->Instance->TAFCR |= tmpreg;
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Sets Tamper with interrupt.
+ * @note By calling this API we force the tamper interrupt for all tampers.
+ * @param hrtc pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sTamper Pointer to RTC Tamper.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_TAMPER(sTamper->Tamper));
+ assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger));
+ assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter));
+ assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency));
+ assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration));
+ assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp));
+ assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Configure the tamper trigger */
+ if (sTamper->Trigger != RTC_TAMPERTRIGGER_RISINGEDGE)
+ {
+ sTamper->Trigger = (uint32_t)(sTamper->Tamper << 1U);
+ }
+
+ tmpreg = ((uint32_t)sTamper->Tamper | (uint32_t)sTamper->Trigger | (uint32_t)sTamper->Filter | \
+ (uint32_t)sTamper->SamplingFrequency | (uint32_t)sTamper->PrechargeDuration | \
+ (uint32_t)sTamper->TamperPullUp | sTamper->TimeStampOnTamperDetection);
+
+ hrtc->Instance->TAFCR &= (uint32_t)~((uint32_t)sTamper->Tamper | (uint32_t)(sTamper->Tamper << 1U) | (uint32_t)RTC_TAFCR_TAMPTS | \
+ (uint32_t)RTC_TAFCR_TAMPFREQ | (uint32_t)RTC_TAFCR_TAMPFLT | (uint32_t)RTC_TAFCR_TAMPPRCH | \
+ (uint32_t)RTC_TAFCR_TAMPPUDIS);
+
+ hrtc->Instance->TAFCR |= tmpreg;
+
+ /* Configure the Tamper Interrupt in the RTC_TAFCR */
+ hrtc->Instance->TAFCR |= (uint32_t)RTC_TAFCR_TAMPIE;
+
+ /* RTC Tamper Interrupt Configuration: EXTI configuration */
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT();
+
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactivate Tamper.
+ * @param hrtc RTC handle
+ * @param Tamper Selected tamper pin.
+ * This parameter can be any combination of RTC_TAMPER_1, RTC_TAMPER_2 and RTC_TAMPER_3.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper)
+{
+ assert_param(IS_RTC_TAMPER(Tamper));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the selected Tamper pin */
+ hrtc->Instance->TAFCR &= (uint32_t)~Tamper;
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle TimeStamp interrupt request.
+ * @param hrtc RTC handle
+ * @retval None
+ */
+void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc)
+{
+ /* Get the TimeStamp interrupt source enable status */
+ if (__HAL_RTC_TIMESTAMP_GET_IT_SOURCE(hrtc, RTC_IT_TS) != RESET)
+ {
+ /* Get the pending status of the TIMESTAMP Interrupt */
+ if (__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSF) != RESET)
+ {
+ /* TIMESTAMP callback */
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+ hrtc->TimeStampEventCallback(hrtc);
+#else
+ HAL_RTCEx_TimeStampEventCallback(hrtc);
+#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
+
+ /* Clear the TIMESTAMP interrupt pending bit */
+ __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF);
+ }
+ }
+
+ /* Get the Tamper interrupts source enable status */
+ if (__HAL_RTC_TAMPER_GET_IT_SOURCE(hrtc, RTC_IT_TAMP))
+ {
+ /* Get the pending status of the Tamper1 Interrupt */
+ if (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP1F) != RESET)
+ {
+ /* Tamper1 callback */
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+ hrtc->Tamper1EventCallback(hrtc);
+#else
+ HAL_RTCEx_Tamper1EventCallback(hrtc);
+#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
+
+ /* Clear the Tamper1 interrupt pending bit */
+ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP1F);
+ }
+ }
+
+ /* Get the Tamper interrupts source enable status */
+ if (__HAL_RTC_TAMPER_GET_IT_SOURCE(hrtc, RTC_IT_TAMP))
+ {
+ /* Get the pending status of the Tamper2 Interrupt */
+ if (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP2F) != RESET)
+ {
+ /* Tamper2 callback */
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+ hrtc->Tamper2EventCallback(hrtc);
+#else
+ HAL_RTCEx_Tamper2EventCallback(hrtc);
+#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
+
+ /* Clear the Tamper2 interrupt pending bit */
+ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP2F);
+ }
+ }
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+ /* Get the Tamper interrupts source enable status */
+ if (__HAL_RTC_TAMPER_GET_IT_SOURCE(hrtc, RTC_IT_TAMP))
+ {
+ /* Get the pending status of the Tamper3 Interrupt */
+ if (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP3F) != RESET)
+ {
+ /* Tamper3 callback */
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+ hrtc->Tamper3EventCallback(hrtc);
+#else
+ HAL_RTCEx_Tamper3EventCallback(hrtc);
+#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
+
+ /* Clear the Tamper3 interrupt pending bit */
+ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP3F);
+ }
+ }
+#endif
+
+ /* Clear the EXTI's Flag for RTC TimeStamp and Tamper */
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG();
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+}
+
+/**
+ * @brief TimeStamp callback.
+ * @param hrtc RTC handle
+ * @retval None
+ */
+__weak void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrtc);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_RTCEx_TimeStampEventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tamper 1 callback.
+ * @param hrtc RTC handle
+ * @retval None
+ */
+__weak void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrtc);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_RTCEx_Tamper1EventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tamper 2 callback.
+ * @param hrtc RTC handle
+ * @retval None
+ */
+__weak void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrtc);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_RTCEx_Tamper2EventCallback could be implemented in the user file
+ */
+}
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+/**
+ * @brief Tamper 3 callback.
+ * @param hrtc RTC handle
+ * @retval None
+ */
+__weak void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrtc);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_RTCEx_Tamper3EventCallback could be implemented in the user file
+ */
+}
+#endif
+
+/**
+ * @brief Handle TimeStamp polling request.
+ * @param hrtc RTC handle
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+ uint32_t tickstart = HAL_GetTick();
+
+ while (__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSF) == RESET)
+ {
+ if (__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSOVF) != RESET)
+ {
+ /* Clear the TIMESTAMP OverRun Flag */
+ __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSOVF);
+
+ /* Change TIMESTAMP state */
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ return HAL_ERROR;
+ }
+
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle Tamper 1 Polling.
+ * @param hrtc RTC handle
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Get the status of the Interrupt */
+ while (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP1F) == RESET)
+ {
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Clear the Tamper Flag */
+ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP1F);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle Tamper 2 Polling.
+ * @param hrtc RTC handle
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Get the status of the Interrupt */
+ while (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP2F) == RESET)
+ {
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Clear the Tamper Flag */
+ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP2F);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ return HAL_OK;
+}
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+/**
+ * @brief Handle Tamper 3 Polling.
+ * @param hrtc RTC handle
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Get the status of the Interrupt */
+ while (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP3F) == RESET)
+ {
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Clear the Tamper Flag */
+ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP3F);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ return HAL_OK;
+}
+#endif
+
+/**
+ * @}
+ */
+
+#if defined(STM32F070xB) || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+/** @addtogroup RTCEx_Exported_Functions_Group2
+ * @brief RTC Wake-up functions
+ *
+@verbatim
+ ===============================================================================
+ ##### RTC Wake-up functions #####
+ ===============================================================================
+
+ [..] This section provides functions allowing to configure Wake-up feature
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Set wake up timer.
+ * @param hrtc RTC handle
+ * @param WakeUpCounter Wake up counter
+ * @param WakeUpClock Wake up clock
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock));
+ assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /*Check RTC WUTWF flag is reset only when wake up timer enabled*/
+ if ((hrtc->Instance->CR & RTC_CR_WUTE) != RESET)
+ {
+ tickstart = HAL_GetTick();
+
+ /* Wait till RTC WUTWF flag is reset and if Time out is reached exit */
+ while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == SET)
+ {
+ if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc);
+
+ tickstart = HAL_GetTick();
+
+ /* Wait till RTC WUTWF flag is set and if Time out is reached exit */
+ while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET)
+ {
+ if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear the Wakeup Timer clock source bits in CR register */
+ hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL;
+
+ /* Configure the clock source */
+ hrtc->Instance->CR |= (uint32_t)WakeUpClock;
+
+ /* Configure the Wakeup Timer counter */
+ hrtc->Instance->WUTR = (uint32_t)WakeUpCounter;
+
+ /* Enable the Wakeup Timer */
+ __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc);
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Set wake up timer with interrupt.
+ * @param hrtc RTC handle
+ * @param WakeUpCounter Wake up counter
+ * @param WakeUpClock Wake up clock
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock));
+ assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /*Check RTC WUTWF flag is reset only when wake up timer enabled*/
+ if ((hrtc->Instance->CR & RTC_CR_WUTE) != RESET)
+ {
+ tickstart = HAL_GetTick();
+
+ /* Wait till RTC WUTWF flag is reset and if Time out is reached exit */
+ while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == SET)
+ {
+ if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Disable the Wake-Up timer */
+ __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc);
+
+ /* Clear flag Wake-Up */
+ __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF);
+
+ tickstart = HAL_GetTick();
+
+ /* Wait till RTC WUTWF flag is set and if Time out is reached exit */
+ while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET)
+ {
+ if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Configure the Wakeup Timer counter */
+ hrtc->Instance->WUTR = (uint32_t)WakeUpCounter;
+
+ /* Clear the Wakeup Timer clock source bits in CR register */
+ hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL;
+
+ /* Configure the clock source */
+ hrtc->Instance->CR |= (uint32_t)WakeUpClock;
+
+ /* RTC WakeUpTimer Interrupt Configuration: EXTI configuration */
+ __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT();
+
+ __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();
+
+ /* Configure the Interrupt in the RTC_CR register */
+ __HAL_RTC_WAKEUPTIMER_ENABLE_IT(hrtc, RTC_IT_WUT);
+
+ /* Enable the Wakeup Timer */
+ __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc);
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactivate wake up timer counter.
+ * @param hrtc RTC handle
+ * @retval HAL status
+ */
+uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Disable the Wakeup Timer */
+ __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc);
+
+ /* In case of interrupt mode is used, the interrupt source must disabled */
+ __HAL_RTC_WAKEUPTIMER_DISABLE_IT(hrtc, RTC_IT_WUT);
+
+ tickstart = HAL_GetTick();
+ /* Wait till RTC WUTWF flag is set and if Time out is reached exit */
+ while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET)
+ {
+ if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Get wake up timer counter.
+ * @param hrtc RTC handle
+ * @retval Counter value
+ */
+uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc)
+{
+ /* Get the counter value */
+ return ((uint32_t)(hrtc->Instance->WUTR & RTC_WUTR_WUT));
+}
+
+/**
+ * @brief Handle Wake Up Timer interrupt request.
+ * @param hrtc RTC handle
+ * @retval None
+ */
+void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc)
+{
+ /* Get the WAKEUPTIMER interrupt source enable status */
+ if (__HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(hrtc, RTC_IT_WUT) != RESET)
+ {
+ /* Get the pending status of the WAKEUPTIMER Interrupt */
+ if (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTF) != RESET)
+ {
+ /* WAKEUPTIMER callback */
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+ hrtc->WakeUpTimerEventCallback(hrtc);
+#else
+ HAL_RTCEx_WakeUpTimerEventCallback(hrtc);
+#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
+
+ /* Clear the WAKEUPTIMER interrupt pending bit */
+ __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF);
+ }
+ }
+
+ /* Clear the EXTI's line Flag for RTC WakeUpTimer */
+ __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG();
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+}
+
+/**
+ * @brief Wake Up Timer callback.
+ * @param hrtc RTC handle
+ * @retval None
+ */
+__weak void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrtc);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_RTCEx_WakeUpTimerEventCallback could be implemented in the user file
+ */
+}
+
+
+/**
+ * @brief Handle Wake Up Timer Polling.
+ * @param hrtc RTC handle
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+ uint32_t tickstart = HAL_GetTick();
+
+ while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTF) == RESET)
+ {
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Clear the WAKEUPTIMER Flag */
+ __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+#endif /* defined(STM32F070xB) || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) | defined(STM32F030xC) */
+
+/** @addtogroup RTCEx_Exported_Functions_Group3
+ * @brief Extended Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides functions allowing to
+ (+) Write a data in a specified RTC Backup data register
+ (+) Read a data in a specified RTC Backup data register
+ (+) Set the Coarse calibration parameters.
+ (+) Deactivate the Coarse calibration parameters
+ (+) Set the Smooth calibration parameters.
+ (+) Configure the Synchronization Shift Control Settings.
+ (+) Configure the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
+ (+) Deactivate the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
+ (+) Enable the RTC reference clock detection.
+ (+) Disable the RTC reference clock detection.
+ (+) Enable the Bypass Shadow feature.
+ (+) Disable the Bypass Shadow feature.
+
+@endverbatim
+ * @{
+ */
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+/**
+ * @brief Write a data in a specified RTC Backup data register.
+ * @param hrtc RTC handle
+ * @param BackupRegister RTC Backup data Register number.
+ * This parameter can be: RTC_BKP_DRx where x can be from 0 to 4 to
+ * specify the register.
+ * @param Data Data to be written in the specified RTC Backup data register.
+ * @retval None
+ */
+void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data)
+{
+ uint32_t tmp = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_BKP(BackupRegister));
+
+ tmp = (uint32_t) & (hrtc->Instance->BKP0R);
+ tmp += (BackupRegister * 4U);
+
+ /* Write the specified register */
+ *(__IO uint32_t *)tmp = (uint32_t)Data;
+}
+
+/**
+ * @brief Reads data from the specified RTC Backup data Register.
+ * @param hrtc RTC handle
+ * @param BackupRegister RTC Backup data Register number.
+ * This parameter can be: RTC_BKP_DRx where x can be from 0 to 4 to
+ * specify the register.
+ * @retval Read value
+ */
+uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister)
+{
+ uint32_t tmp = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_BKP(BackupRegister));
+
+ tmp = (uint32_t) & (hrtc->Instance->BKP0R);
+ tmp += (BackupRegister * 4U);
+
+ /* Read the specified register */
+ return (*(__IO uint32_t *)tmp);
+}
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+
+/**
+ * @brief Set the Smooth calibration parameters.
+ * @param hrtc RTC handle
+ * @param SmoothCalibPeriod Select the Smooth Calibration Period.
+ * This parameter can be can be one of the following values :
+ * @arg RTC_SMOOTHCALIB_PERIOD_32SEC: The smooth calibration period is 32s.
+ * @arg RTC_SMOOTHCALIB_PERIOD_16SEC: The smooth calibration period is 16s.
+ * @arg RTC_SMOOTHCALIB_PERIOD_8SEC: The smooth calibration period is 8s.
+ * @param SmoothCalibPlusPulses Select to Set or reset the CALP bit.
+ * This parameter can be one of the following values:
+ * @arg RTC_SMOOTHCALIB_PLUSPULSES_SET: Add one RTCCLK pulse every 2*11 pulses.
+ * @arg RTC_SMOOTHCALIB_PLUSPULSES_RESET: No RTCCLK pulses are added.
+ * @param SmoothCalibMinusPulsesValue Select the value of CALM[8:0] bits.
+ * This parameter can be one any value from 0 to 0x000001FF.
+ * @note To deactivate the smooth calibration, the field SmoothCalibPlusPulses
+ * must be equal to SMOOTHCALIB_PLUSPULSES_RESET and the field
+ * SmoothCalibMinusPulsesValue mut be equal to 0.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_SMOOTH_CALIB_PERIOD(SmoothCalibPeriod));
+ assert_param(IS_RTC_SMOOTH_CALIB_PLUS(SmoothCalibPlusPulses));
+ assert_param(IS_RTC_SMOOTH_CALIB_MINUS(SmoothCalibMinusPulsesValue));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* check if a calibration is pending*/
+ if ((hrtc->Instance->ISR & RTC_ISR_RECALPF) != RESET)
+ {
+ tickstart = HAL_GetTick();
+
+ /* check if a calibration is pending*/
+ while ((hrtc->Instance->ISR & RTC_ISR_RECALPF) != RESET)
+ {
+ if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Configure the Smooth calibration settings */
+ hrtc->Instance->CALR = (uint32_t)((uint32_t)SmoothCalibPeriod | (uint32_t)SmoothCalibPlusPulses | (uint32_t)SmoothCalibMinusPulsesValue);
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the Synchronization Shift Control Settings.
+ * @note When REFCKON is set, firmware must not write to Shift control register.
+ * @param hrtc RTC handle
+ * @param ShiftAdd1S Select to add or not 1 second to the time calendar.
+ * This parameter can be one of the following values :
+ * @arg RTC_SHIFTADD1S_SET: Add one second to the clock calendar.
+ * @arg RTC_SHIFTADD1S_RESET: No effect.
+ * @param ShiftSubFS Select the number of Second Fractions to substitute.
+ * This parameter can be one any value from 0 to 0x7FFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_SHIFT_ADD1S(ShiftAdd1S));
+ assert_param(IS_RTC_SHIFT_SUBFS(ShiftSubFS));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ tickstart = HAL_GetTick();
+
+ /* Wait until the shift is completed*/
+ while ((hrtc->Instance->ISR & RTC_ISR_SHPF) != RESET)
+ {
+ if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Check if the reference clock detection is disabled */
+ if ((hrtc->Instance->CR & RTC_CR_REFCKON) == RESET)
+ {
+ /* Configure the Shift settings */
+ hrtc->Instance->SHIFTR = (uint32_t)(uint32_t)(ShiftSubFS) | (uint32_t)(ShiftAdd1S);
+
+ /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
+ if ((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET)
+ {
+ if (HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ }
+ }
+ else
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
+ * @param hrtc RTC handle
+ * @param CalibOutput Select the Calibration output Selection .
+ * This parameter can be one of the following values:
+ * @arg RTC_CALIBOUTPUT_512HZ: A signal has a regular waveform at 512Hz.
+ * @arg RTC_CALIBOUTPUT_1HZ: A signal has a regular waveform at 1Hz.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput)
+{
+ /* Check the parameters */
+ assert_param(IS_RTC_CALIB_OUTPUT(CalibOutput));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Clear flags before config */
+ hrtc->Instance->CR &= (uint32_t)~RTC_CR_COSEL;
+
+ /* Configure the RTC_CR register */
+ hrtc->Instance->CR |= (uint32_t)CalibOutput;
+
+ __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(hrtc);
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactivate the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
+ * @param hrtc RTC handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc)
+{
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(hrtc);
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enable the RTC reference clock detection.
+ * @param hrtc RTC handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc)
+{
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Set Initialization mode */
+ if (RTC_EnterInitMode(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Set RTC state*/
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ __HAL_RTC_CLOCKREF_DETECTION_ENABLE(hrtc);
+
+ /* Exit Initialization mode */
+ hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
+ }
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disable the RTC reference clock detection.
+ * @param hrtc RTC handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc)
+{
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Set Initialization mode */
+ if (RTC_EnterInitMode(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Set RTC state*/
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ __HAL_RTC_CLOCKREF_DETECTION_DISABLE(hrtc);
+
+ /* Exit Initialization mode */
+ hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
+ }
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enable the Bypass Shadow feature.
+ * @param hrtc RTC handle
+ * @note When the Bypass Shadow is enabled the calendar value are taken
+ * directly from the Calendar counter.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc)
+{
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Set the BYPSHAD bit */
+ hrtc->Instance->CR |= (uint8_t)RTC_CR_BYPSHAD;
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disable the Bypass Shadow feature.
+ * @param hrtc RTC handle
+ * @note When the Bypass Shadow is enabled the calendar value are taken
+ * directly from the Calendar counter.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc)
+{
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Reset the BYPSHAD bit */
+ hrtc->Instance->CR &= ((uint8_t)~RTC_CR_BYPSHAD);
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|