diff options
Diffstat (limited to 'fw/midi-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_dma.h')
| -rw-r--r-- | fw/midi-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_dma.h | 2208 |
1 files changed, 2208 insertions, 0 deletions
diff --git a/fw/midi-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_dma.h b/fw/midi-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_dma.h new file mode 100644 index 0000000..c789835 --- /dev/null +++ b/fw/midi-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_dma.h @@ -0,0 +1,2208 @@ +/**
+ ******************************************************************************
+ * @file stm32f0xx_ll_dma.h
+ * @author MCD Application Team
+ * @brief Header file of DMA LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_LL_DMA_H
+#define __STM32F0xx_LL_DMA_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx.h"
+
+/** @addtogroup STM32F0xx_LL_Driver
+ * @{
+ */
+
+#if defined (DMA1) || defined (DMA2)
+
+/** @defgroup DMA_LL DMA
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup DMA_LL_Private_Variables DMA Private Variables
+ * @{
+ */
+/* Array used to get the DMA channel register offset versus channel index LL_DMA_CHANNEL_x */
+static const uint8_t CHANNEL_OFFSET_TAB[] =
+{
+ (uint8_t)(DMA1_Channel1_BASE - DMA1_BASE),
+ (uint8_t)(DMA1_Channel2_BASE - DMA1_BASE),
+ (uint8_t)(DMA1_Channel3_BASE - DMA1_BASE),
+ (uint8_t)(DMA1_Channel4_BASE - DMA1_BASE),
+ (uint8_t)(DMA1_Channel5_BASE - DMA1_BASE),
+#if defined(DMA1_Channel6)
+ (uint8_t)(DMA1_Channel6_BASE - DMA1_BASE),
+#endif /*DMA1_Channel6*/
+#if defined(DMA1_Channel7)
+ (uint8_t)(DMA1_Channel7_BASE - DMA1_BASE)
+#endif /*DMA1_Channel7*/
+};
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup DMA_LL_Private_Constants DMA Private Constants
+ * @{
+ */
+/* Define used to get CSELR register offset */
+#define DMA_CSELR_OFFSET (uint32_t)(DMA1_CSELR_BASE - DMA1_BASE)
+
+/* Defines used for the bit position in the register and perform offsets */
+#define DMA_POSITION_CSELR_CXS ((Channel-1U)*4U)
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup DMA_LL_Private_Macros DMA Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup DMA_LL_ES_INIT DMA Exported Init structure
+ * @{
+ */
+typedef struct
+{
+ uint32_t PeriphOrM2MSrcAddress; /*!< Specifies the peripheral base address for DMA transfer
+ or as Source base address in case of memory to memory transfer direction.
+
+ This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */
+
+ uint32_t MemoryOrM2MDstAddress; /*!< Specifies the memory base address for DMA transfer
+ or as Destination base address in case of memory to memory transfer direction.
+
+ This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */
+
+ uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral,
+ from memory to memory or from peripheral to memory.
+ This parameter can be a value of @ref DMA_LL_EC_DIRECTION
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataTransferDirection(). */
+
+ uint32_t Mode; /*!< Specifies the normal or circular operation mode.
+ This parameter can be a value of @ref DMA_LL_EC_MODE
+ @note: The circular buffer mode cannot be used if the memory to memory
+ data transfer direction is configured on the selected Channel
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetMode(). */
+
+ uint32_t PeriphOrM2MSrcIncMode; /*!< Specifies whether the Peripheral address or Source address in case of memory to memory transfer direction
+ is incremented or not.
+ This parameter can be a value of @ref DMA_LL_EC_PERIPH
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphIncMode(). */
+
+ uint32_t MemoryOrM2MDstIncMode; /*!< Specifies whether the Memory address or Destination address in case of memory to memory transfer direction
+ is incremented or not.
+ This parameter can be a value of @ref DMA_LL_EC_MEMORY
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemoryIncMode(). */
+
+ uint32_t PeriphOrM2MSrcDataSize; /*!< Specifies the Peripheral data size alignment or Source data size alignment (byte, half word, word)
+ in case of memory to memory transfer direction.
+ This parameter can be a value of @ref DMA_LL_EC_PDATAALIGN
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphSize(). */
+
+ uint32_t MemoryOrM2MDstDataSize; /*!< Specifies the Memory data size alignment or Destination data size alignment (byte, half word, word)
+ in case of memory to memory transfer direction.
+ This parameter can be a value of @ref DMA_LL_EC_MDATAALIGN
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemorySize(). */
+
+ uint32_t NbData; /*!< Specifies the number of data to transfer, in data unit.
+ The data unit is equal to the source buffer configuration set in PeripheralSize
+ or MemorySize parameters depending in the transfer direction.
+ This parameter must be a value between Min_Data = 0 and Max_Data = 0x0000FFFF
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataLength(). */
+#if (defined(DMA1_CSELR_DEFAULT)||defined(DMA2_CSELR_DEFAULT))
+
+ uint32_t PeriphRequest; /*!< Specifies the peripheral request.
+ This parameter can be a value of @ref DMA_LL_EC_REQUEST
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphRequest(). */
+#endif
+
+ uint32_t Priority; /*!< Specifies the channel priority level.
+ This parameter can be a value of @ref DMA_LL_EC_PRIORITY
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetChannelPriorityLevel(). */
+
+} LL_DMA_InitTypeDef;
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DMA_LL_Exported_Constants DMA Exported Constants
+ * @{
+ */
+/** @defgroup DMA_LL_EC_CLEAR_FLAG Clear Flags Defines
+ * @brief Flags defines which can be used with LL_DMA_WriteReg function
+ * @{
+ */
+#define LL_DMA_IFCR_CGIF1 DMA_IFCR_CGIF1 /*!< Channel 1 global flag */
+#define LL_DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1 /*!< Channel 1 transfer complete flag */
+#define LL_DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1 /*!< Channel 1 half transfer flag */
+#define LL_DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1 /*!< Channel 1 transfer error flag */
+#define LL_DMA_IFCR_CGIF2 DMA_IFCR_CGIF2 /*!< Channel 2 global flag */
+#define LL_DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2 /*!< Channel 2 transfer complete flag */
+#define LL_DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2 /*!< Channel 2 half transfer flag */
+#define LL_DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2 /*!< Channel 2 transfer error flag */
+#define LL_DMA_IFCR_CGIF3 DMA_IFCR_CGIF3 /*!< Channel 3 global flag */
+#define LL_DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3 /*!< Channel 3 transfer complete flag */
+#define LL_DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3 /*!< Channel 3 half transfer flag */
+#define LL_DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3 /*!< Channel 3 transfer error flag */
+#define LL_DMA_IFCR_CGIF4 DMA_IFCR_CGIF4 /*!< Channel 4 global flag */
+#define LL_DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4 /*!< Channel 4 transfer complete flag */
+#define LL_DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4 /*!< Channel 4 half transfer flag */
+#define LL_DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4 /*!< Channel 4 transfer error flag */
+#define LL_DMA_IFCR_CGIF5 DMA_IFCR_CGIF5 /*!< Channel 5 global flag */
+#define LL_DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5 /*!< Channel 5 transfer complete flag */
+#define LL_DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5 /*!< Channel 5 half transfer flag */
+#define LL_DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5 /*!< Channel 5 transfer error flag */
+#if defined(DMA1_Channel6)
+#define LL_DMA_IFCR_CGIF6 DMA_IFCR_CGIF6 /*!< Channel 6 global flag */
+#define LL_DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6 /*!< Channel 6 transfer complete flag */
+#define LL_DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6 /*!< Channel 6 half transfer flag */
+#define LL_DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6 /*!< Channel 6 transfer error flag */
+#endif
+#if defined(DMA1_Channel7)
+#define LL_DMA_IFCR_CGIF7 DMA_IFCR_CGIF7 /*!< Channel 7 global flag */
+#define LL_DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7 /*!< Channel 7 transfer complete flag */
+#define LL_DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7 /*!< Channel 7 half transfer flag */
+#define LL_DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7 /*!< Channel 7 transfer error flag */
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_GET_FLAG Get Flags Defines
+ * @brief Flags defines which can be used with LL_DMA_ReadReg function
+ * @{
+ */
+#define LL_DMA_ISR_GIF1 DMA_ISR_GIF1 /*!< Channel 1 global flag */
+#define LL_DMA_ISR_TCIF1 DMA_ISR_TCIF1 /*!< Channel 1 transfer complete flag */
+#define LL_DMA_ISR_HTIF1 DMA_ISR_HTIF1 /*!< Channel 1 half transfer flag */
+#define LL_DMA_ISR_TEIF1 DMA_ISR_TEIF1 /*!< Channel 1 transfer error flag */
+#define LL_DMA_ISR_GIF2 DMA_ISR_GIF2 /*!< Channel 2 global flag */
+#define LL_DMA_ISR_TCIF2 DMA_ISR_TCIF2 /*!< Channel 2 transfer complete flag */
+#define LL_DMA_ISR_HTIF2 DMA_ISR_HTIF2 /*!< Channel 2 half transfer flag */
+#define LL_DMA_ISR_TEIF2 DMA_ISR_TEIF2 /*!< Channel 2 transfer error flag */
+#define LL_DMA_ISR_GIF3 DMA_ISR_GIF3 /*!< Channel 3 global flag */
+#define LL_DMA_ISR_TCIF3 DMA_ISR_TCIF3 /*!< Channel 3 transfer complete flag */
+#define LL_DMA_ISR_HTIF3 DMA_ISR_HTIF3 /*!< Channel 3 half transfer flag */
+#define LL_DMA_ISR_TEIF3 DMA_ISR_TEIF3 /*!< Channel 3 transfer error flag */
+#define LL_DMA_ISR_GIF4 DMA_ISR_GIF4 /*!< Channel 4 global flag */
+#define LL_DMA_ISR_TCIF4 DMA_ISR_TCIF4 /*!< Channel 4 transfer complete flag */
+#define LL_DMA_ISR_HTIF4 DMA_ISR_HTIF4 /*!< Channel 4 half transfer flag */
+#define LL_DMA_ISR_TEIF4 DMA_ISR_TEIF4 /*!< Channel 4 transfer error flag */
+#define LL_DMA_ISR_GIF5 DMA_ISR_GIF5 /*!< Channel 5 global flag */
+#define LL_DMA_ISR_TCIF5 DMA_ISR_TCIF5 /*!< Channel 5 transfer complete flag */
+#define LL_DMA_ISR_HTIF5 DMA_ISR_HTIF5 /*!< Channel 5 half transfer flag */
+#define LL_DMA_ISR_TEIF5 DMA_ISR_TEIF5 /*!< Channel 5 transfer error flag */
+#if defined(DMA1_Channel6)
+#define LL_DMA_ISR_GIF6 DMA_ISR_GIF6 /*!< Channel 6 global flag */
+#define LL_DMA_ISR_TCIF6 DMA_ISR_TCIF6 /*!< Channel 6 transfer complete flag */
+#define LL_DMA_ISR_HTIF6 DMA_ISR_HTIF6 /*!< Channel 6 half transfer flag */
+#define LL_DMA_ISR_TEIF6 DMA_ISR_TEIF6 /*!< Channel 6 transfer error flag */
+#endif
+#if defined(DMA1_Channel7)
+#define LL_DMA_ISR_GIF7 DMA_ISR_GIF7 /*!< Channel 7 global flag */
+#define LL_DMA_ISR_TCIF7 DMA_ISR_TCIF7 /*!< Channel 7 transfer complete flag */
+#define LL_DMA_ISR_HTIF7 DMA_ISR_HTIF7 /*!< Channel 7 half transfer flag */
+#define LL_DMA_ISR_TEIF7 DMA_ISR_TEIF7 /*!< Channel 7 transfer error flag */
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_IT IT Defines
+ * @brief IT defines which can be used with LL_DMA_ReadReg and LL_DMA_WriteReg functions
+ * @{
+ */
+#define LL_DMA_CCR_TCIE DMA_CCR_TCIE /*!< Transfer complete interrupt */
+#define LL_DMA_CCR_HTIE DMA_CCR_HTIE /*!< Half Transfer interrupt */
+#define LL_DMA_CCR_TEIE DMA_CCR_TEIE /*!< Transfer error interrupt */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_CHANNEL CHANNEL
+ * @{
+ */
+#define LL_DMA_CHANNEL_1 0x00000001U /*!< DMA Channel 1 */
+#define LL_DMA_CHANNEL_2 0x00000002U /*!< DMA Channel 2 */
+#define LL_DMA_CHANNEL_3 0x00000003U /*!< DMA Channel 3 */
+#define LL_DMA_CHANNEL_4 0x00000004U /*!< DMA Channel 4 */
+#define LL_DMA_CHANNEL_5 0x00000005U /*!< DMA Channel 5 */
+#if defined(DMA1_Channel6)
+#define LL_DMA_CHANNEL_6 0x00000006U /*!< DMA Channel 6 */
+#endif
+#if defined(DMA1_Channel7)
+#define LL_DMA_CHANNEL_7 0x00000007U /*!< DMA Channel 7 */
+#endif
+#if defined(USE_FULL_LL_DRIVER)
+#define LL_DMA_CHANNEL_ALL 0xFFFF0000U /*!< DMA Channel all (used only for function @ref LL_DMA_DeInit(). */
+#endif /*USE_FULL_LL_DRIVER*/
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_DIRECTION Transfer Direction
+ * @{
+ */
+#define LL_DMA_DIRECTION_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */
+#define LL_DMA_DIRECTION_MEMORY_TO_PERIPH DMA_CCR_DIR /*!< Memory to peripheral direction */
+#define LL_DMA_DIRECTION_MEMORY_TO_MEMORY DMA_CCR_MEM2MEM /*!< Memory to memory direction */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_MODE Transfer mode
+ * @{
+ */
+#define LL_DMA_MODE_NORMAL 0x00000000U /*!< Normal Mode */
+#define LL_DMA_MODE_CIRCULAR DMA_CCR_CIRC /*!< Circular Mode */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_PERIPH Peripheral increment mode
+ * @{
+ */
+#define LL_DMA_PERIPH_INCREMENT DMA_CCR_PINC /*!< Peripheral increment mode Enable */
+#define LL_DMA_PERIPH_NOINCREMENT 0x00000000U /*!< Peripheral increment mode Disable */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_MEMORY Memory increment mode
+ * @{
+ */
+#define LL_DMA_MEMORY_INCREMENT DMA_CCR_MINC /*!< Memory increment mode Enable */
+#define LL_DMA_MEMORY_NOINCREMENT 0x00000000U /*!< Memory increment mode Disable */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_PDATAALIGN Peripheral data alignment
+ * @{
+ */
+#define LL_DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment : Byte */
+#define LL_DMA_PDATAALIGN_HALFWORD DMA_CCR_PSIZE_0 /*!< Peripheral data alignment : HalfWord */
+#define LL_DMA_PDATAALIGN_WORD DMA_CCR_PSIZE_1 /*!< Peripheral data alignment : Word */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_MDATAALIGN Memory data alignment
+ * @{
+ */
+#define LL_DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment : Byte */
+#define LL_DMA_MDATAALIGN_HALFWORD DMA_CCR_MSIZE_0 /*!< Memory data alignment : HalfWord */
+#define LL_DMA_MDATAALIGN_WORD DMA_CCR_MSIZE_1 /*!< Memory data alignment : Word */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_PRIORITY Transfer Priority level
+ * @{
+ */
+#define LL_DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */
+#define LL_DMA_PRIORITY_MEDIUM DMA_CCR_PL_0 /*!< Priority level : Medium */
+#define LL_DMA_PRIORITY_HIGH DMA_CCR_PL_1 /*!< Priority level : High */
+#define LL_DMA_PRIORITY_VERYHIGH DMA_CCR_PL /*!< Priority level : Very_High */
+/**
+ * @}
+ */
+
+#if (defined(DMA1_CSELR_DEFAULT)||defined(DMA2_CSELR_DEFAULT))
+/** @defgroup DMA_LL_EC_REQUEST Transfer peripheral request
+ * @{
+ */
+#define LL_DMA_REQUEST_0 0x00000000U /*!< DMA peripheral request 0 */
+#define LL_DMA_REQUEST_1 0x00000001U /*!< DMA peripheral request 1 */
+#define LL_DMA_REQUEST_2 0x00000002U /*!< DMA peripheral request 2 */
+#define LL_DMA_REQUEST_3 0x00000003U /*!< DMA peripheral request 3 */
+#define LL_DMA_REQUEST_4 0x00000004U /*!< DMA peripheral request 4 */
+#define LL_DMA_REQUEST_5 0x00000005U /*!< DMA peripheral request 5 */
+#define LL_DMA_REQUEST_6 0x00000006U /*!< DMA peripheral request 6 */
+#define LL_DMA_REQUEST_7 0x00000007U /*!< DMA peripheral request 7 */
+#define LL_DMA_REQUEST_8 0x00000008U /*!< DMA peripheral request 8 */
+#define LL_DMA_REQUEST_9 0x00000009U /*!< DMA peripheral request 9 */
+#define LL_DMA_REQUEST_10 0x0000000AU /*!< DMA peripheral request 10 */
+#define LL_DMA_REQUEST_11 0x0000000BU /*!< DMA peripheral request 11 */
+#define LL_DMA_REQUEST_12 0x0000000CU /*!< DMA peripheral request 12 */
+#define LL_DMA_REQUEST_13 0x0000000DU /*!< DMA peripheral request 13 */
+#define LL_DMA_REQUEST_14 0x0000000EU /*!< DMA peripheral request 14 */
+#define LL_DMA_REQUEST_15 0x0000000FU /*!< DMA peripheral request 15 */
+/**
+ * @}
+ */
+#endif
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup DMA_LL_Exported_Macros DMA Exported Macros
+ * @{
+ */
+
+/** @defgroup DMA_LL_EM_WRITE_READ Common Write and read registers macros
+ * @{
+ */
+/**
+ * @brief Write a value in DMA register
+ * @param __INSTANCE__ DMA Instance
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_DMA_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in DMA register
+ * @param __INSTANCE__ DMA Instance
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_DMA_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EM_CONVERT_DMAxCHANNELy Convert DMAxChannely
+ * @{
+ */
+/**
+ * @brief Convert DMAx_Channely into DMAx
+ * @param __CHANNEL_INSTANCE__ DMAx_Channely
+ * @retval DMAx
+ */
+#if defined(DMA2)
+#define __LL_DMA_GET_INSTANCE(__CHANNEL_INSTANCE__) \
+(((uint32_t)(__CHANNEL_INSTANCE__) > ((uint32_t)DMA1_Channel7)) ? DMA2 : DMA1)
+#else
+#define __LL_DMA_GET_INSTANCE(__CHANNEL_INSTANCE__) (DMA1)
+#endif
+
+/**
+ * @brief Convert DMAx_Channely into LL_DMA_CHANNEL_y
+ * @param __CHANNEL_INSTANCE__ DMAx_Channely
+ * @retval LL_DMA_CHANNEL_y
+ */
+#if defined (DMA2)
+#if defined (DMA2_Channel6) && defined (DMA2_Channel7)
+#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \
+(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel1)) ? LL_DMA_CHANNEL_1 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel2)) ? LL_DMA_CHANNEL_2 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel3)) ? LL_DMA_CHANNEL_3 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel4)) ? LL_DMA_CHANNEL_4 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel5)) ? LL_DMA_CHANNEL_5 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel6)) ? LL_DMA_CHANNEL_6 : \
+ LL_DMA_CHANNEL_7)
+#else
+#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \
+(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel1)) ? LL_DMA_CHANNEL_1 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel2)) ? LL_DMA_CHANNEL_2 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel3)) ? LL_DMA_CHANNEL_3 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel4)) ? LL_DMA_CHANNEL_4 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel5)) ? LL_DMA_CHANNEL_5 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \
+ LL_DMA_CHANNEL_7)
+#endif
+#else
+#if defined (DMA1_Channel6) && defined (DMA1_Channel7)
+#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \
+(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \
+ LL_DMA_CHANNEL_7)
+#elif defined (DMA1_Channel6)
+#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \
+(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \
+ LL_DMA_CHANNEL_6)
+#else
+#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \
+(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \
+ LL_DMA_CHANNEL_5)
+#endif /* DMA1_Channel6 && DMA1_Channel7 */
+#endif
+
+/**
+ * @brief Convert DMA Instance DMAx and LL_DMA_CHANNEL_y into DMAx_Channely
+ * @param __DMA_INSTANCE__ DMAx
+ * @param __CHANNEL__ LL_DMA_CHANNEL_y
+ * @retval DMAx_Channely
+ */
+#if defined (DMA2)
+#if defined (DMA2_Channel6) && defined (DMA2_Channel7)
+#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \
+((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA2_Channel1 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA2_Channel2 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA2_Channel3 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA2_Channel4 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA2_Channel5 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA2_Channel6 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_7))) ? DMA1_Channel7 : \
+ DMA2_Channel7)
+#else
+#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \
+((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA2_Channel1 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA2_Channel2 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA2_Channel3 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA2_Channel4 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA2_Channel5 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \
+ DMA1_Channel7)
+#endif
+#else
+#if defined (DMA1_Channel6) && defined (DMA1_Channel7)
+#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \
+((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \
+ DMA1_Channel7)
+#elif defined (DMA1_Channel6)
+#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \
+((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \
+ DMA1_Channel6)
+#else
+#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \
+((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \
+ DMA1_Channel5)
+#endif /* DMA1_Channel6 && DMA1_Channel7 */
+#endif
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup DMA_LL_Exported_Functions DMA Exported Functions
+ * @{
+ */
+
+/** @defgroup DMA_LL_EF_Configuration Configuration
+ * @{
+ */
+/**
+ * @brief Enable DMA channel.
+ * @rmtoll CCR EN LL_DMA_EnableChannel
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_EnableChannel(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_EN);
+}
+
+/**
+ * @brief Disable DMA channel.
+ * @rmtoll CCR EN LL_DMA_DisableChannel
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_DisableChannel(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_EN);
+}
+
+/**
+ * @brief Check if DMA channel is enabled or disabled.
+ * @rmtoll CCR EN LL_DMA_IsEnabledChannel
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsEnabledChannel(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_EN) == (DMA_CCR_EN));
+}
+
+/**
+ * @brief Configure all parameters link to DMA transfer.
+ * @rmtoll CCR DIR LL_DMA_ConfigTransfer\n
+ * CCR MEM2MEM LL_DMA_ConfigTransfer\n
+ * CCR CIRC LL_DMA_ConfigTransfer\n
+ * CCR PINC LL_DMA_ConfigTransfer\n
+ * CCR MINC LL_DMA_ConfigTransfer\n
+ * CCR PSIZE LL_DMA_ConfigTransfer\n
+ * CCR MSIZE LL_DMA_ConfigTransfer\n
+ * CCR PL LL_DMA_ConfigTransfer
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param Configuration This parameter must be a combination of all the following values:
+ * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY or @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH or @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY
+ * @arg @ref LL_DMA_MODE_NORMAL or @ref LL_DMA_MODE_CIRCULAR
+ * @arg @ref LL_DMA_PERIPH_INCREMENT or @ref LL_DMA_PERIPH_NOINCREMENT
+ * @arg @ref LL_DMA_MEMORY_INCREMENT or @ref LL_DMA_MEMORY_NOINCREMENT
+ * @arg @ref LL_DMA_PDATAALIGN_BYTE or @ref LL_DMA_PDATAALIGN_HALFWORD or @ref LL_DMA_PDATAALIGN_WORD
+ * @arg @ref LL_DMA_MDATAALIGN_BYTE or @ref LL_DMA_MDATAALIGN_HALFWORD or @ref LL_DMA_MDATAALIGN_WORD
+ * @arg @ref LL_DMA_PRIORITY_LOW or @ref LL_DMA_PRIORITY_MEDIUM or @ref LL_DMA_PRIORITY_HIGH or @ref LL_DMA_PRIORITY_VERYHIGH
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ConfigTransfer(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Configuration)
+{
+ MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_DIR | DMA_CCR_MEM2MEM | DMA_CCR_CIRC | DMA_CCR_PINC | DMA_CCR_MINC | DMA_CCR_PSIZE | DMA_CCR_MSIZE | DMA_CCR_PL,
+ Configuration);
+}
+
+/**
+ * @brief Set Data transfer direction (read from peripheral or from memory).
+ * @rmtoll CCR DIR LL_DMA_SetDataTransferDirection\n
+ * CCR MEM2MEM LL_DMA_SetDataTransferDirection
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param Direction This parameter can be one of the following values:
+ * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY
+ * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH
+ * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Direction)
+{
+ MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_DIR | DMA_CCR_MEM2MEM, Direction);
+}
+
+/**
+ * @brief Get Data transfer direction (read from peripheral or from memory).
+ * @rmtoll CCR DIR LL_DMA_GetDataTransferDirection\n
+ * CCR MEM2MEM LL_DMA_GetDataTransferDirection
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY
+ * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH
+ * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_DIR | DMA_CCR_MEM2MEM));
+}
+
+/**
+ * @brief Set DMA mode circular or normal.
+ * @note The circular buffer mode cannot be used if the memory-to-memory
+ * data transfer is configured on the selected Channel.
+ * @rmtoll CCR CIRC LL_DMA_SetMode
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param Mode This parameter can be one of the following values:
+ * @arg @ref LL_DMA_MODE_NORMAL
+ * @arg @ref LL_DMA_MODE_CIRCULAR
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Mode)
+{
+ MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_CIRC,
+ Mode);
+}
+
+/**
+ * @brief Get DMA mode circular or normal.
+ * @rmtoll CCR CIRC LL_DMA_GetMode
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_MODE_NORMAL
+ * @arg @ref LL_DMA_MODE_CIRCULAR
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetMode(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_CIRC));
+}
+
+/**
+ * @brief Set Peripheral increment mode.
+ * @rmtoll CCR PINC LL_DMA_SetPeriphIncMode
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param PeriphOrM2MSrcIncMode This parameter can be one of the following values:
+ * @arg @ref LL_DMA_PERIPH_INCREMENT
+ * @arg @ref LL_DMA_PERIPH_NOINCREMENT
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcIncMode)
+{
+ MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_PINC,
+ PeriphOrM2MSrcIncMode);
+}
+
+/**
+ * @brief Get Peripheral increment mode.
+ * @rmtoll CCR PINC LL_DMA_GetPeriphIncMode
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_PERIPH_INCREMENT
+ * @arg @ref LL_DMA_PERIPH_NOINCREMENT
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_PINC));
+}
+
+/**
+ * @brief Set Memory increment mode.
+ * @rmtoll CCR MINC LL_DMA_SetMemoryIncMode
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param MemoryOrM2MDstIncMode This parameter can be one of the following values:
+ * @arg @ref LL_DMA_MEMORY_INCREMENT
+ * @arg @ref LL_DMA_MEMORY_NOINCREMENT
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstIncMode)
+{
+ MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_MINC,
+ MemoryOrM2MDstIncMode);
+}
+
+/**
+ * @brief Get Memory increment mode.
+ * @rmtoll CCR MINC LL_DMA_GetMemoryIncMode
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_MEMORY_INCREMENT
+ * @arg @ref LL_DMA_MEMORY_NOINCREMENT
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_MINC));
+}
+
+/**
+ * @brief Set Peripheral size.
+ * @rmtoll CCR PSIZE LL_DMA_SetPeriphSize
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param PeriphOrM2MSrcDataSize This parameter can be one of the following values:
+ * @arg @ref LL_DMA_PDATAALIGN_BYTE
+ * @arg @ref LL_DMA_PDATAALIGN_HALFWORD
+ * @arg @ref LL_DMA_PDATAALIGN_WORD
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcDataSize)
+{
+ MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_PSIZE,
+ PeriphOrM2MSrcDataSize);
+}
+
+/**
+ * @brief Get Peripheral size.
+ * @rmtoll CCR PSIZE LL_DMA_GetPeriphSize
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_PDATAALIGN_BYTE
+ * @arg @ref LL_DMA_PDATAALIGN_HALFWORD
+ * @arg @ref LL_DMA_PDATAALIGN_WORD
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_PSIZE));
+}
+
+/**
+ * @brief Set Memory size.
+ * @rmtoll CCR MSIZE LL_DMA_SetMemorySize
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param MemoryOrM2MDstDataSize This parameter can be one of the following values:
+ * @arg @ref LL_DMA_MDATAALIGN_BYTE
+ * @arg @ref LL_DMA_MDATAALIGN_HALFWORD
+ * @arg @ref LL_DMA_MDATAALIGN_WORD
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstDataSize)
+{
+ MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_MSIZE,
+ MemoryOrM2MDstDataSize);
+}
+
+/**
+ * @brief Get Memory size.
+ * @rmtoll CCR MSIZE LL_DMA_GetMemorySize
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_MDATAALIGN_BYTE
+ * @arg @ref LL_DMA_MDATAALIGN_HALFWORD
+ * @arg @ref LL_DMA_MDATAALIGN_WORD
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_MSIZE));
+}
+
+/**
+ * @brief Set Channel priority level.
+ * @rmtoll CCR PL LL_DMA_SetChannelPriorityLevel
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param Priority This parameter can be one of the following values:
+ * @arg @ref LL_DMA_PRIORITY_LOW
+ * @arg @ref LL_DMA_PRIORITY_MEDIUM
+ * @arg @ref LL_DMA_PRIORITY_HIGH
+ * @arg @ref LL_DMA_PRIORITY_VERYHIGH
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Priority)
+{
+ MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_PL,
+ Priority);
+}
+
+/**
+ * @brief Get Channel priority level.
+ * @rmtoll CCR PL LL_DMA_GetChannelPriorityLevel
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_PRIORITY_LOW
+ * @arg @ref LL_DMA_PRIORITY_MEDIUM
+ * @arg @ref LL_DMA_PRIORITY_HIGH
+ * @arg @ref LL_DMA_PRIORITY_VERYHIGH
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_PL));
+}
+
+/**
+ * @brief Set Number of data to transfer.
+ * @note This action has no effect if
+ * channel is enabled.
+ * @rmtoll CNDTR NDT LL_DMA_SetDataLength
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param NbData Between Min_Data = 0 and Max_Data = 0x0000FFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetDataLength(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t NbData)
+{
+ MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CNDTR,
+ DMA_CNDTR_NDT, NbData);
+}
+
+/**
+ * @brief Get Number of data to transfer.
+ * @note Once the channel is enabled, the return value indicate the
+ * remaining bytes to be transmitted.
+ * @rmtoll CNDTR NDT LL_DMA_GetDataLength
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetDataLength(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CNDTR,
+ DMA_CNDTR_NDT));
+}
+
+/**
+ * @brief Configure the Source and Destination addresses.
+ * @note This API must not be called when the DMA channel is enabled.
+ * @note Each IP using DMA provides an API to get directly the register adress (LL_PPP_DMA_GetRegAddr).
+ * @rmtoll CPAR PA LL_DMA_ConfigAddresses\n
+ * CMAR MA LL_DMA_ConfigAddresses
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param SrcAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ * @param DstAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ * @param Direction This parameter can be one of the following values:
+ * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY
+ * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH
+ * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ConfigAddresses(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t SrcAddress,
+ uint32_t DstAddress, uint32_t Direction)
+{
+ /* Direction Memory to Periph */
+ if (Direction == LL_DMA_DIRECTION_MEMORY_TO_PERIPH)
+ {
+ WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR, SrcAddress);
+ WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR, DstAddress);
+ }
+ /* Direction Periph to Memory and Memory to Memory */
+ else
+ {
+ WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR, SrcAddress);
+ WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR, DstAddress);
+ }
+}
+
+/**
+ * @brief Set the Memory address.
+ * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only.
+ * @note This API must not be called when the DMA channel is enabled.
+ * @rmtoll CMAR MA LL_DMA_SetMemoryAddress
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress)
+{
+ WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR, MemoryAddress);
+}
+
+/**
+ * @brief Set the Peripheral address.
+ * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only.
+ * @note This API must not be called when the DMA channel is enabled.
+ * @rmtoll CPAR PA LL_DMA_SetPeriphAddress
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param PeriphAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphAddress)
+{
+ WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR, PeriphAddress);
+}
+
+/**
+ * @brief Get Memory address.
+ * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only.
+ * @rmtoll CMAR MA LL_DMA_GetMemoryAddress
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR));
+}
+
+/**
+ * @brief Get Peripheral address.
+ * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only.
+ * @rmtoll CPAR PA LL_DMA_GetPeriphAddress
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR));
+}
+
+/**
+ * @brief Set the Memory to Memory Source address.
+ * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only.
+ * @note This API must not be called when the DMA channel is enabled.
+ * @rmtoll CPAR PA LL_DMA_SetM2MSrcAddress
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress)
+{
+ WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR, MemoryAddress);
+}
+
+/**
+ * @brief Set the Memory to Memory Destination address.
+ * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only.
+ * @note This API must not be called when the DMA channel is enabled.
+ * @rmtoll CMAR MA LL_DMA_SetM2MDstAddress
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress)
+{
+ WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR, MemoryAddress);
+}
+
+/**
+ * @brief Get the Memory to Memory Source address.
+ * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only.
+ * @rmtoll CPAR PA LL_DMA_GetM2MSrcAddress
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR));
+}
+
+/**
+ * @brief Get the Memory to Memory Destination address.
+ * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only.
+ * @rmtoll CMAR MA LL_DMA_GetM2MDstAddress
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR));
+}
+
+#if (defined(DMA1_CSELR_DEFAULT)||defined(DMA2_CSELR_DEFAULT))
+/**
+ * @brief Set DMA request for DMA instance on Channel x.
+ * @note Please refer to Reference Manual to get the available mapping of Request value link to Channel Selection.
+ * @rmtoll CSELR C1S LL_DMA_SetPeriphRequest\n
+ * CSELR C2S LL_DMA_SetPeriphRequest\n
+ * CSELR C3S LL_DMA_SetPeriphRequest\n
+ * CSELR C4S LL_DMA_SetPeriphRequest\n
+ * CSELR C5S LL_DMA_SetPeriphRequest\n
+ * CSELR C6S LL_DMA_SetPeriphRequest\n
+ * CSELR C7S LL_DMA_SetPeriphRequest
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param PeriphRequest This parameter can be one of the following values:
+ * @arg @ref LL_DMA_REQUEST_0
+ * @arg @ref LL_DMA_REQUEST_1
+ * @arg @ref LL_DMA_REQUEST_2
+ * @arg @ref LL_DMA_REQUEST_3
+ * @arg @ref LL_DMA_REQUEST_4
+ * @arg @ref LL_DMA_REQUEST_5
+ * @arg @ref LL_DMA_REQUEST_6
+ * @arg @ref LL_DMA_REQUEST_7
+ * @arg @ref LL_DMA_REQUEST_8
+ * @arg @ref LL_DMA_REQUEST_9
+ * @arg @ref LL_DMA_REQUEST_10
+ * @arg @ref LL_DMA_REQUEST_11
+ * @arg @ref LL_DMA_REQUEST_12
+ * @arg @ref LL_DMA_REQUEST_13
+ * @arg @ref LL_DMA_REQUEST_14
+ * @arg @ref LL_DMA_REQUEST_15
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphRequest)
+{
+ MODIFY_REG(DMAx->CSELR,
+ DMA_CSELR_C1S << ((Channel - 1U) * 4U), PeriphRequest << DMA_POSITION_CSELR_CXS);
+}
+
+/**
+ * @brief Get DMA request for DMA instance on Channel x.
+ * @rmtoll CSELR C1S LL_DMA_GetPeriphRequest\n
+ * CSELR C2S LL_DMA_GetPeriphRequest\n
+ * CSELR C3S LL_DMA_GetPeriphRequest\n
+ * CSELR C4S LL_DMA_GetPeriphRequest\n
+ * CSELR C5S LL_DMA_GetPeriphRequest\n
+ * CSELR C6S LL_DMA_GetPeriphRequest\n
+ * CSELR C7S LL_DMA_GetPeriphRequest
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_REQUEST_0
+ * @arg @ref LL_DMA_REQUEST_1
+ * @arg @ref LL_DMA_REQUEST_2
+ * @arg @ref LL_DMA_REQUEST_3
+ * @arg @ref LL_DMA_REQUEST_4
+ * @arg @ref LL_DMA_REQUEST_5
+ * @arg @ref LL_DMA_REQUEST_6
+ * @arg @ref LL_DMA_REQUEST_7
+ * @arg @ref LL_DMA_REQUEST_8
+ * @arg @ref LL_DMA_REQUEST_9
+ * @arg @ref LL_DMA_REQUEST_10
+ * @arg @ref LL_DMA_REQUEST_11
+ * @arg @ref LL_DMA_REQUEST_12
+ * @arg @ref LL_DMA_REQUEST_13
+ * @arg @ref LL_DMA_REQUEST_14
+ * @arg @ref LL_DMA_REQUEST_15
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(DMAx->CSELR,
+ DMA_CSELR_C1S << ((Channel - 1U) * 4U)) >> DMA_POSITION_CSELR_CXS);
+}
+#endif
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EF_FLAG_Management FLAG_Management
+ * @{
+ */
+
+/**
+ * @brief Get Channel 1 global interrupt flag.
+ * @rmtoll ISR GIF1 LL_DMA_IsActiveFlag_GI1
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI1(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_GIF1) == (DMA_ISR_GIF1));
+}
+
+/**
+ * @brief Get Channel 2 global interrupt flag.
+ * @rmtoll ISR GIF2 LL_DMA_IsActiveFlag_GI2
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI2(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_GIF2) == (DMA_ISR_GIF2));
+}
+
+/**
+ * @brief Get Channel 3 global interrupt flag.
+ * @rmtoll ISR GIF3 LL_DMA_IsActiveFlag_GI3
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI3(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_GIF3) == (DMA_ISR_GIF3));
+}
+
+/**
+ * @brief Get Channel 4 global interrupt flag.
+ * @rmtoll ISR GIF4 LL_DMA_IsActiveFlag_GI4
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI4(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_GIF4) == (DMA_ISR_GIF4));
+}
+
+/**
+ * @brief Get Channel 5 global interrupt flag.
+ * @rmtoll ISR GIF5 LL_DMA_IsActiveFlag_GI5
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI5(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_GIF5) == (DMA_ISR_GIF5));
+}
+
+#if defined(DMA1_Channel6)
+/**
+ * @brief Get Channel 6 global interrupt flag.
+ * @rmtoll ISR GIF6 LL_DMA_IsActiveFlag_GI6
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI6(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_GIF6) == (DMA_ISR_GIF6));
+}
+#endif
+
+#if defined(DMA1_Channel7)
+/**
+ * @brief Get Channel 7 global interrupt flag.
+ * @rmtoll ISR GIF7 LL_DMA_IsActiveFlag_GI7
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI7(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_GIF7) == (DMA_ISR_GIF7));
+}
+#endif
+
+/**
+ * @brief Get Channel 1 transfer complete flag.
+ * @rmtoll ISR TCIF1 LL_DMA_IsActiveFlag_TC1
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC1(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF1) == (DMA_ISR_TCIF1));
+}
+
+/**
+ * @brief Get Channel 2 transfer complete flag.
+ * @rmtoll ISR TCIF2 LL_DMA_IsActiveFlag_TC2
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC2(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF2) == (DMA_ISR_TCIF2));
+}
+
+/**
+ * @brief Get Channel 3 transfer complete flag.
+ * @rmtoll ISR TCIF3 LL_DMA_IsActiveFlag_TC3
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC3(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF3) == (DMA_ISR_TCIF3));
+}
+
+/**
+ * @brief Get Channel 4 transfer complete flag.
+ * @rmtoll ISR TCIF4 LL_DMA_IsActiveFlag_TC4
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC4(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF4) == (DMA_ISR_TCIF4));
+}
+
+/**
+ * @brief Get Channel 5 transfer complete flag.
+ * @rmtoll ISR TCIF5 LL_DMA_IsActiveFlag_TC5
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC5(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF5) == (DMA_ISR_TCIF5));
+}
+
+#if defined(DMA1_Channel6)
+/**
+ * @brief Get Channel 6 transfer complete flag.
+ * @rmtoll ISR TCIF6 LL_DMA_IsActiveFlag_TC6
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC6(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF6) == (DMA_ISR_TCIF6));
+}
+#endif
+
+#if defined(DMA1_Channel7)
+/**
+ * @brief Get Channel 7 transfer complete flag.
+ * @rmtoll ISR TCIF7 LL_DMA_IsActiveFlag_TC7
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC7(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF7) == (DMA_ISR_TCIF7));
+}
+#endif
+
+/**
+ * @brief Get Channel 1 half transfer flag.
+ * @rmtoll ISR HTIF1 LL_DMA_IsActiveFlag_HT1
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT1(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF1) == (DMA_ISR_HTIF1));
+}
+
+/**
+ * @brief Get Channel 2 half transfer flag.
+ * @rmtoll ISR HTIF2 LL_DMA_IsActiveFlag_HT2
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT2(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF2) == (DMA_ISR_HTIF2));
+}
+
+/**
+ * @brief Get Channel 3 half transfer flag.
+ * @rmtoll ISR HTIF3 LL_DMA_IsActiveFlag_HT3
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT3(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF3) == (DMA_ISR_HTIF3));
+}
+
+/**
+ * @brief Get Channel 4 half transfer flag.
+ * @rmtoll ISR HTIF4 LL_DMA_IsActiveFlag_HT4
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT4(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF4) == (DMA_ISR_HTIF4));
+}
+
+/**
+ * @brief Get Channel 5 half transfer flag.
+ * @rmtoll ISR HTIF5 LL_DMA_IsActiveFlag_HT5
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT5(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF5) == (DMA_ISR_HTIF5));
+}
+
+#if defined(DMA1_Channel6)
+/**
+ * @brief Get Channel 6 half transfer flag.
+ * @rmtoll ISR HTIF6 LL_DMA_IsActiveFlag_HT6
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT6(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF6) == (DMA_ISR_HTIF6));
+}
+#endif
+
+#if defined(DMA1_Channel7)
+/**
+ * @brief Get Channel 7 half transfer flag.
+ * @rmtoll ISR HTIF7 LL_DMA_IsActiveFlag_HT7
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT7(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF7) == (DMA_ISR_HTIF7));
+}
+#endif
+
+/**
+ * @brief Get Channel 1 transfer error flag.
+ * @rmtoll ISR TEIF1 LL_DMA_IsActiveFlag_TE1
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE1(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF1) == (DMA_ISR_TEIF1));
+}
+
+/**
+ * @brief Get Channel 2 transfer error flag.
+ * @rmtoll ISR TEIF2 LL_DMA_IsActiveFlag_TE2
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE2(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF2) == (DMA_ISR_TEIF2));
+}
+
+/**
+ * @brief Get Channel 3 transfer error flag.
+ * @rmtoll ISR TEIF3 LL_DMA_IsActiveFlag_TE3
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE3(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF3) == (DMA_ISR_TEIF3));
+}
+
+/**
+ * @brief Get Channel 4 transfer error flag.
+ * @rmtoll ISR TEIF4 LL_DMA_IsActiveFlag_TE4
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE4(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF4) == (DMA_ISR_TEIF4));
+}
+
+/**
+ * @brief Get Channel 5 transfer error flag.
+ * @rmtoll ISR TEIF5 LL_DMA_IsActiveFlag_TE5
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE5(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF5) == (DMA_ISR_TEIF5));
+}
+
+#if defined(DMA1_Channel6)
+/**
+ * @brief Get Channel 6 transfer error flag.
+ * @rmtoll ISR TEIF6 LL_DMA_IsActiveFlag_TE6
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE6(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF6) == (DMA_ISR_TEIF6));
+}
+#endif
+
+#if defined(DMA1_Channel7)
+/**
+ * @brief Get Channel 7 transfer error flag.
+ * @rmtoll ISR TEIF7 LL_DMA_IsActiveFlag_TE7
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE7(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF7) == (DMA_ISR_TEIF7));
+}
+#endif
+
+/**
+ * @brief Clear Channel 1 global interrupt flag.
+ * @rmtoll IFCR CGIF1 LL_DMA_ClearFlag_GI1
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_GI1(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF1);
+}
+
+/**
+ * @brief Clear Channel 2 global interrupt flag.
+ * @rmtoll IFCR CGIF2 LL_DMA_ClearFlag_GI2
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_GI2(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF2);
+}
+
+/**
+ * @brief Clear Channel 3 global interrupt flag.
+ * @rmtoll IFCR CGIF3 LL_DMA_ClearFlag_GI3
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_GI3(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF3);
+}
+
+/**
+ * @brief Clear Channel 4 global interrupt flag.
+ * @rmtoll IFCR CGIF4 LL_DMA_ClearFlag_GI4
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_GI4(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF4);
+}
+
+/**
+ * @brief Clear Channel 5 global interrupt flag.
+ * @rmtoll IFCR CGIF5 LL_DMA_ClearFlag_GI5
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_GI5(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF5);
+}
+
+#if defined(DMA1_Channel6)
+/**
+ * @brief Clear Channel 6 global interrupt flag.
+ * @rmtoll IFCR CGIF6 LL_DMA_ClearFlag_GI6
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_GI6(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF6);
+}
+#endif
+
+#if defined(DMA1_Channel7)
+/**
+ * @brief Clear Channel 7 global interrupt flag.
+ * @rmtoll IFCR CGIF7 LL_DMA_ClearFlag_GI7
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_GI7(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF7);
+}
+#endif
+
+/**
+ * @brief Clear Channel 1 transfer complete flag.
+ * @rmtoll IFCR CTCIF1 LL_DMA_ClearFlag_TC1
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC1(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF1);
+}
+
+/**
+ * @brief Clear Channel 2 transfer complete flag.
+ * @rmtoll IFCR CTCIF2 LL_DMA_ClearFlag_TC2
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC2(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF2);
+}
+
+/**
+ * @brief Clear Channel 3 transfer complete flag.
+ * @rmtoll IFCR CTCIF3 LL_DMA_ClearFlag_TC3
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC3(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF3);
+}
+
+/**
+ * @brief Clear Channel 4 transfer complete flag.
+ * @rmtoll IFCR CTCIF4 LL_DMA_ClearFlag_TC4
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC4(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF4);
+}
+
+/**
+ * @brief Clear Channel 5 transfer complete flag.
+ * @rmtoll IFCR CTCIF5 LL_DMA_ClearFlag_TC5
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC5(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF5);
+}
+
+#if defined(DMA1_Channel6)
+/**
+ * @brief Clear Channel 6 transfer complete flag.
+ * @rmtoll IFCR CTCIF6 LL_DMA_ClearFlag_TC6
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC6(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF6);
+}
+#endif
+
+#if defined(DMA1_Channel7)
+/**
+ * @brief Clear Channel 7 transfer complete flag.
+ * @rmtoll IFCR CTCIF7 LL_DMA_ClearFlag_TC7
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC7(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF7);
+}
+#endif
+
+/**
+ * @brief Clear Channel 1 half transfer flag.
+ * @rmtoll IFCR CHTIF1 LL_DMA_ClearFlag_HT1
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT1(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF1);
+}
+
+/**
+ * @brief Clear Channel 2 half transfer flag.
+ * @rmtoll IFCR CHTIF2 LL_DMA_ClearFlag_HT2
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT2(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF2);
+}
+
+/**
+ * @brief Clear Channel 3 half transfer flag.
+ * @rmtoll IFCR CHTIF3 LL_DMA_ClearFlag_HT3
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT3(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF3);
+}
+
+/**
+ * @brief Clear Channel 4 half transfer flag.
+ * @rmtoll IFCR CHTIF4 LL_DMA_ClearFlag_HT4
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT4(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF4);
+}
+
+/**
+ * @brief Clear Channel 5 half transfer flag.
+ * @rmtoll IFCR CHTIF5 LL_DMA_ClearFlag_HT5
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT5(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF5);
+}
+
+#if defined(DMA1_Channel6)
+/**
+ * @brief Clear Channel 6 half transfer flag.
+ * @rmtoll IFCR CHTIF6 LL_DMA_ClearFlag_HT6
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT6(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF6);
+}
+#endif
+
+#if defined(DMA1_Channel7)
+/**
+ * @brief Clear Channel 7 half transfer flag.
+ * @rmtoll IFCR CHTIF7 LL_DMA_ClearFlag_HT7
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT7(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF7);
+}
+#endif
+
+/**
+ * @brief Clear Channel 1 transfer error flag.
+ * @rmtoll IFCR CTEIF1 LL_DMA_ClearFlag_TE1
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE1(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF1);
+}
+
+/**
+ * @brief Clear Channel 2 transfer error flag.
+ * @rmtoll IFCR CTEIF2 LL_DMA_ClearFlag_TE2
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE2(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF2);
+}
+
+/**
+ * @brief Clear Channel 3 transfer error flag.
+ * @rmtoll IFCR CTEIF3 LL_DMA_ClearFlag_TE3
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE3(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF3);
+}
+
+/**
+ * @brief Clear Channel 4 transfer error flag.
+ * @rmtoll IFCR CTEIF4 LL_DMA_ClearFlag_TE4
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE4(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF4);
+}
+
+/**
+ * @brief Clear Channel 5 transfer error flag.
+ * @rmtoll IFCR CTEIF5 LL_DMA_ClearFlag_TE5
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE5(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF5);
+}
+
+#if defined(DMA1_Channel6)
+/**
+ * @brief Clear Channel 6 transfer error flag.
+ * @rmtoll IFCR CTEIF6 LL_DMA_ClearFlag_TE6
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE6(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF6);
+}
+#endif
+
+#if defined(DMA1_Channel7)
+/**
+ * @brief Clear Channel 7 transfer error flag.
+ * @rmtoll IFCR CTEIF7 LL_DMA_ClearFlag_TE7
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE7(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF7);
+}
+#endif
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EF_IT_Management IT_Management
+ * @{
+ */
+/**
+ * @brief Enable Transfer complete interrupt.
+ * @rmtoll CCR TCIE LL_DMA_EnableIT_TC
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_EnableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_TCIE);
+}
+
+/**
+ * @brief Enable Half transfer interrupt.
+ * @rmtoll CCR HTIE LL_DMA_EnableIT_HT
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_EnableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_HTIE);
+}
+
+/**
+ * @brief Enable Transfer error interrupt.
+ * @rmtoll CCR TEIE LL_DMA_EnableIT_TE
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_EnableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_TEIE);
+}
+
+/**
+ * @brief Disable Transfer complete interrupt.
+ * @rmtoll CCR TCIE LL_DMA_DisableIT_TC
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_DisableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_TCIE);
+}
+
+/**
+ * @brief Disable Half transfer interrupt.
+ * @rmtoll CCR HTIE LL_DMA_DisableIT_HT
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_DisableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_HTIE);
+}
+
+/**
+ * @brief Disable Transfer error interrupt.
+ * @rmtoll CCR TEIE LL_DMA_DisableIT_TE
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_DisableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_TEIE);
+}
+
+/**
+ * @brief Check if Transfer complete Interrupt is enabled.
+ * @rmtoll CCR TCIE LL_DMA_IsEnabledIT_TC
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TC(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_TCIE) == (DMA_CCR_TCIE));
+}
+
+/**
+ * @brief Check if Half transfer Interrupt is enabled.
+ * @rmtoll CCR HTIE LL_DMA_IsEnabledIT_HT
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_HT(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_HTIE) == (DMA_CCR_HTIE));
+}
+
+/**
+ * @brief Check if Transfer error Interrupt is enabled.
+ * @rmtoll CCR TEIE LL_DMA_IsEnabledIT_TE
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TE(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_TEIE) == (DMA_CCR_TEIE));
+}
+
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup DMA_LL_EF_Init Initialization and de-initialization functions
+ * @{
+ */
+
+uint32_t LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Channel, LL_DMA_InitTypeDef *DMA_InitStruct);
+uint32_t LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Channel);
+void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct);
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* DMA1 || DMA2 */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_LL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|