diff options
Diffstat (limited to 'fw/midi-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h')
| -rw-r--r-- | fw/midi-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h | 2085 |
1 files changed, 2085 insertions, 0 deletions
diff --git a/fw/midi-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h b/fw/midi-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h new file mode 100644 index 0000000..0062222 --- /dev/null +++ b/fw/midi-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h @@ -0,0 +1,2085 @@ +/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_rcc_ex.h
+ * @author MCD Application Team
+ * @brief Header file of RCC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_RCC_EX_H
+#define __STM32F0xx_HAL_RCC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCC
+ * @{
+ */
+
+/** @addtogroup RCC_Private_Macros
+ * @{
+ */
+#if defined(RCC_HSI48_SUPPORT)
+#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) (((OSCILLATOR) == RCC_OSCILLATORTYPE_NONE) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI14) == RCC_OSCILLATORTYPE_HSI14) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48))
+
+#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_HSI48))
+
+#define IS_RCC_SYSCLKSOURCE_STATUS(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSI) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSE) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_PLLCLK) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSI48))
+
+#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \
+ ((SOURCE) == RCC_PLLSOURCE_HSI48) || \
+ ((SOURCE) == RCC_PLLSOURCE_HSE))
+
+#define IS_RCC_HSI48(HSI48) (((HSI48) == RCC_HSI48_OFF) || ((HSI48) == RCC_HSI48_ON))
+
+#else
+
+#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) (((OSCILLATOR) == RCC_OSCILLATORTYPE_NONE) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI14) == RCC_OSCILLATORTYPE_HSI14))
+#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK))
+
+#define IS_RCC_SYSCLKSOURCE_STATUS(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSI) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSE) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_PLLCLK))
+#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \
+ ((SOURCE) == RCC_PLLSOURCE_HSE))
+
+#endif /* RCC_HSI48_SUPPORT */
+
+#if defined(RCC_CFGR_PLLNODIV) && !defined(RCC_CFGR_MCO_HSI48)
+
+#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_NOCLOCK) || \
+ ((SOURCE) == RCC_MCO1SOURCE_LSI) || \
+ ((SOURCE) == RCC_MCO1SOURCE_LSE) || \
+ ((SOURCE) == RCC_MCO1SOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSI) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSE) || \
+ ((SOURCE) == RCC_MCO1SOURCE_PLLCLK) || \
+ ((SOURCE) == RCC_MCO1SOURCE_PLLCLK_DIV2) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSI14))
+
+#elif defined(RCC_CFGR_PLLNODIV) && defined(RCC_CFGR_MCO_HSI48)
+
+#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_NOCLOCK) || \
+ ((SOURCE) == RCC_MCO1SOURCE_LSI) || \
+ ((SOURCE) == RCC_MCO1SOURCE_LSE) || \
+ ((SOURCE) == RCC_MCO1SOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSI) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSE) || \
+ ((SOURCE) == RCC_MCO1SOURCE_PLLCLK) || \
+ ((SOURCE) == RCC_MCO1SOURCE_PLLCLK_DIV2) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSI14) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSI48))
+
+#elif !defined(RCC_CFGR_PLLNODIV) && !defined(RCC_CFGR_MCO_HSI48)
+
+#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_NOCLOCK) || \
+ ((SOURCE) == RCC_MCO1SOURCE_LSI) || \
+ ((SOURCE) == RCC_MCO1SOURCE_LSE) || \
+ ((SOURCE) == RCC_MCO1SOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSI) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSE) || \
+ ((SOURCE) == RCC_MCO1SOURCE_PLLCLK_DIV2) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSI14))
+
+#endif /* RCC_CFGR_PLLNODIV && !RCC_CFGR_MCO_HSI48 */
+
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_Exported_Constants
+ * @{
+ */
+#if defined(RCC_HSI48_SUPPORT)
+
+/** @addtogroup RCC_PLL_Clock_Source
+ * @{
+ */
+#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_PREDIV
+#define RCC_PLLSOURCE_HSI48 RCC_CFGR_PLLSRC_HSI48_PREDIV
+
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_Interrupt
+ * @{
+ */
+#define RCC_IT_HSI48 RCC_CIR_HSI48RDYF /*!< HSI48 Ready Interrupt flag */
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_Flag
+ * @{
+ */
+#define RCC_FLAG_HSI48RDY ((uint8_t)((CR2_REG_INDEX << 5U) | RCC_CR2_HSI48RDY_BitNumber))
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_System_Clock_Source
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_HSI48 RCC_CFGR_SW_HSI48
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_System_Clock_Source_Status
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_STATUS_HSI48 RCC_CFGR_SWS_HSI48
+/**
+ * @}
+ */
+
+#else
+/** @addtogroup RCC_PLL_Clock_Source
+ * @{
+ */
+
+#if defined(STM32F070xB) || defined(STM32F070x6) || defined(STM32F030xC)
+#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_PREDIV
+#else
+#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_DIV2
+#endif
+
+/**
+ * @}
+ */
+
+#endif /* RCC_HSI48_SUPPORT */
+
+/** @addtogroup RCC_MCO_Clock_Source
+ * @{
+ */
+
+#if defined(RCC_CFGR_PLLNODIV)
+
+#define RCC_MCO1SOURCE_PLLCLK (RCC_CFGR_MCO_PLL | RCC_CFGR_PLLNODIV)
+
+#endif /* RCC_CFGR_PLLNODIV */
+
+#if defined(RCC_CFGR_MCO_HSI48)
+
+#define RCC_MCO1SOURCE_HSI48 RCC_CFGR_MCO_HSI48
+
+#endif /* SRCC_CFGR_MCO_HSI48 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup RCCEx
+ * @{
+ */
+
+/* Private Constants -------------------------------------------------------------*/
+#if defined(CRS)
+/** @addtogroup RCCEx_Private_Constants
+ * @{
+ */
+
+/* CRS IT Error Mask */
+#define RCC_CRS_IT_ERROR_MASK ((uint32_t)(RCC_CRS_IT_TRIMOVF | RCC_CRS_IT_SYNCERR | RCC_CRS_IT_SYNCMISS))
+
+/* CRS Flag Error Mask */
+#define RCC_CRS_FLAG_ERROR_MASK ((uint32_t)(RCC_CRS_FLAG_TRIMOVF | RCC_CRS_FLAG_SYNCERR | RCC_CRS_FLAG_SYNCMISS))
+
+/**
+ * @}
+ */
+#endif /* CRS */
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup RCCEx_Private_Macros RCCEx Private Macros
+ * @{
+ */
+#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx)\
+ || defined(STM32F030xC)
+
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \
+ RCC_PERIPHCLK_RTC))
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx ||
+ STM32F030xC */
+
+#if defined(STM32F070x6) || defined(STM32F070xB)
+
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \
+ RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_USB))
+#endif /* STM32F070x6 || STM32F070xB */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)
+
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \
+ RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_USB))
+#endif /* STM32F042x6 || STM32F048xx */
+
+#if defined(STM32F051x8) || defined(STM32F058xx)
+
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \
+ RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_RTC))
+#endif /* STM32F051x8 || STM32F058xx */
+
+#if defined(STM32F071xB)
+
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_CEC | \
+ RCC_PERIPHCLK_RTC))
+#endif /* STM32F071xB */
+
+#if defined(STM32F072xB) || defined(STM32F078xx)
+
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_CEC | \
+ RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_USB))
+#endif /* STM32F072xB || STM32F078xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_CEC | \
+ RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_USART3 ))
+#endif /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx)
+
+#define IS_RCC_USBCLKSOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSOURCE_HSI48) || \
+ ((SOURCE) == RCC_USBCLKSOURCE_PLL))
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx */
+
+#if defined(STM32F070x6) || defined(STM32F070xB)
+
+#define IS_RCC_USBCLKSOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSOURCE_NONE) || \
+ ((SOURCE) == RCC_USBCLKSOURCE_PLL))
+
+#endif /* STM32F070x6 || STM32F070xB */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define IS_RCC_USART2CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART2CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_USART2CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART2CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART2CLKSOURCE_HSI))
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+#define IS_RCC_USART3CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART3CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_USART3CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART3CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART3CLKSOURCE_HSI))
+#endif /* STM32F091xC || STM32F098xx */
+
+
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define IS_RCC_CECCLKSOURCE(SOURCE) (((SOURCE) == RCC_CECCLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_CECCLKSOURCE_LSE))
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(RCC_CFGR_MCOPRE)
+
+#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1) || ((DIV) == RCC_MCODIV_2) || \
+ ((DIV) == RCC_MCODIV_4) || ((DIV) == RCC_MCODIV_8) || \
+ ((DIV) == RCC_MCODIV_16) || ((DIV) == RCC_MCODIV_32) || \
+ ((DIV) == RCC_MCODIV_64) || ((DIV) == RCC_MCODIV_128))
+#else
+
+#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1))
+
+#endif /* RCC_CFGR_MCOPRE */
+
+#define IS_RCC_LSE_DRIVE(__DRIVE__) (((__DRIVE__) == RCC_LSEDRIVE_LOW) || \
+ ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMLOW) || \
+ ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMHIGH) || \
+ ((__DRIVE__) == RCC_LSEDRIVE_HIGH))
+
+#if defined(CRS)
+
+#define IS_RCC_CRS_SYNC_SOURCE(_SOURCE_) (((_SOURCE_) == RCC_CRS_SYNC_SOURCE_GPIO) || \
+ ((_SOURCE_) == RCC_CRS_SYNC_SOURCE_LSE) || \
+ ((_SOURCE_) == RCC_CRS_SYNC_SOURCE_USB))
+#define IS_RCC_CRS_SYNC_DIV(_DIV_) (((_DIV_) == RCC_CRS_SYNC_DIV1) || ((_DIV_) == RCC_CRS_SYNC_DIV2) || \
+ ((_DIV_) == RCC_CRS_SYNC_DIV4) || ((_DIV_) == RCC_CRS_SYNC_DIV8) || \
+ ((_DIV_) == RCC_CRS_SYNC_DIV16) || ((_DIV_) == RCC_CRS_SYNC_DIV32) || \
+ ((_DIV_) == RCC_CRS_SYNC_DIV64) || ((_DIV_) == RCC_CRS_SYNC_DIV128))
+#define IS_RCC_CRS_SYNC_POLARITY(_POLARITY_) (((_POLARITY_) == RCC_CRS_SYNC_POLARITY_RISING) || \
+ ((_POLARITY_) == RCC_CRS_SYNC_POLARITY_FALLING))
+#define IS_RCC_CRS_RELOADVALUE(_VALUE_) (((_VALUE_) <= 0xFFFFU))
+#define IS_RCC_CRS_ERRORLIMIT(_VALUE_) (((_VALUE_) <= 0xFFU))
+#define IS_RCC_CRS_HSI48CALIBRATION(_VALUE_) (((_VALUE_) <= 0x3FU))
+#define IS_RCC_CRS_FREQERRORDIR(_DIR_) (((_DIR_) == RCC_CRS_FREQERRORDIR_UP) || \
+ ((_DIR_) == RCC_CRS_FREQERRORDIR_DOWN))
+#endif /* CRS */
+/**
+ * @}
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup RCCEx_Exported_Types RCCEx Exported Types
+ * @{
+ */
+
+/**
+ * @brief RCC extended clocks structure definition
+ */
+#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx)\
+ || defined(STM32F030xC)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx ||
+ STM32F030xC */
+
+#if defined(STM32F070x6) || defined(STM32F070xB)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t UsbClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F070x6 || STM32F070xB */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t CecClockSelection; /*!< HDMI CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+ uint32_t UsbClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F042x6 || STM32F048xx */
+
+#if defined(STM32F051x8) || defined(STM32F058xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t CecClockSelection; /*!< HDMI CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F051x8 || STM32F058xx */
+
+#if defined(STM32F071xB)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCCEx_USART2_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t CecClockSelection; /*!< HDMI CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F071xB */
+
+#if defined(STM32F072xB) || defined(STM32F078xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCCEx_USART2_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t CecClockSelection; /*!< HDMI CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+ uint32_t UsbClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F072xB || STM32F078xx */
+
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCCEx_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCCEx_USART3_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t CecClockSelection; /*!< HDMI CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F091xC || STM32F098xx */
+
+#if defined(CRS)
+
+/**
+ * @brief RCC_CRS Init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the division factor of the SYNC signal.
+ This parameter can be a value of @ref RCCEx_CRS_SynchroDivider */
+
+ uint32_t Source; /*!< Specifies the SYNC signal source.
+ This parameter can be a value of @ref RCCEx_CRS_SynchroSource */
+
+ uint32_t Polarity; /*!< Specifies the input polarity for the SYNC signal source.
+ This parameter can be a value of @ref RCCEx_CRS_SynchroPolarity */
+
+ uint32_t ReloadValue; /*!< Specifies the value to be loaded in the frequency error counter with each SYNC event.
+ It can be calculated in using macro @ref __HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET__, __FSYNC__)
+ This parameter must be a number between 0 and 0xFFFF or a value of @ref RCCEx_CRS_ReloadValueDefault .*/
+
+ uint32_t ErrorLimitValue; /*!< Specifies the value to be used to evaluate the captured frequency error value.
+ This parameter must be a number between 0 and 0xFF or a value of @ref RCCEx_CRS_ErrorLimitDefault */
+
+ uint32_t HSI48CalibrationValue; /*!< Specifies a user-programmable trimming value to the HSI48 oscillator.
+ This parameter must be a number between 0 and 0x3F or a value of @ref RCCEx_CRS_HSI48CalibrationDefault */
+
+}RCC_CRSInitTypeDef;
+
+/**
+ * @brief RCC_CRS Synchronization structure definition
+ */
+typedef struct
+{
+ uint32_t ReloadValue; /*!< Specifies the value loaded in the Counter reload value.
+ This parameter must be a number between 0 and 0xFFFFU */
+
+ uint32_t HSI48CalibrationValue; /*!< Specifies value loaded in HSI48 oscillator smooth trimming.
+ This parameter must be a number between 0 and 0x3FU */
+
+ uint32_t FreqErrorCapture; /*!< Specifies the value loaded in the .FECAP, the frequency error counter
+ value latched in the time of the last SYNC event.
+ This parameter must be a number between 0 and 0xFFFFU */
+
+ uint32_t FreqErrorDirection; /*!< Specifies the value loaded in the .FEDIR, the counting direction of the
+ frequency error counter latched in the time of the last SYNC event.
+ It shows whether the actual frequency is below or above the target.
+ This parameter must be a value of @ref RCCEx_CRS_FreqErrorDirection*/
+
+}RCC_CRSSynchroInfoTypeDef;
+
+#endif /* CRS */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants
+ * @{
+ */
+
+/** @defgroup RCCEx_Periph_Clock_Selection RCCEx Periph Clock Selection
+ * @{
+ */
+#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx)\
+ || defined(STM32F030xC)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx ||
+ STM32F030xC */
+
+#if defined(STM32F070x6) || defined(STM32F070xB)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+#define RCC_PERIPHCLK_USB (0x00020000U)
+
+#endif /* STM32F070x6 || STM32F070xB */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_CEC (0x00000400U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+#define RCC_PERIPHCLK_USB (0x00020000U)
+
+#endif /* STM32F042x6 || STM32F048xx */
+
+#if defined(STM32F051x8) || defined(STM32F058xx)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_CEC (0x00000400U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+
+#endif /* STM32F051x8 || STM32F058xx */
+
+#if defined(STM32F071xB)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_USART2 (0x00000002U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_CEC (0x00000400U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+
+#endif /* STM32F071xB */
+
+#if defined(STM32F072xB) || defined(STM32F078xx)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_USART2 (0x00000002U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_CEC (0x00000400U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+#define RCC_PERIPHCLK_USB (0x00020000U)
+
+#endif /* STM32F072xB || STM32F078xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_USART2 (0x00000002U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_CEC (0x00000400U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+#define RCC_PERIPHCLK_USART3 (0x00040000U)
+
+#endif /* STM32F091xC || STM32F098xx */
+
+/**
+ * @}
+ */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx)
+
+/** @defgroup RCCEx_USB_Clock_Source RCCEx USB Clock Source
+ * @{
+ */
+#define RCC_USBCLKSOURCE_HSI48 RCC_CFGR3_USBSW_HSI48 /*!< HSI48 clock selected as USB clock source */
+#define RCC_USBCLKSOURCE_PLL RCC_CFGR3_USBSW_PLLCLK /*!< PLL clock (PLLCLK) selected as USB clock */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx */
+
+#if defined(STM32F070x6) || defined(STM32F070xB)
+
+/** @defgroup RCCEx_USB_Clock_Source RCCEx USB Clock Source
+ * @{
+ */
+#define RCC_USBCLKSOURCE_NONE (0x00000000U) /*!< USB clock disabled */
+#define RCC_USBCLKSOURCE_PLL RCC_CFGR3_USBSW_PLLCLK /*!< PLL clock (PLLCLK) selected as USB clock */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F070x6 || STM32F070xB */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @defgroup RCCEx_USART2_Clock_Source RCCEx USART2 Clock Source
+ * @{
+ */
+#define RCC_USART2CLKSOURCE_PCLK1 RCC_CFGR3_USART2SW_PCLK
+#define RCC_USART2CLKSOURCE_SYSCLK RCC_CFGR3_USART2SW_SYSCLK
+#define RCC_USART2CLKSOURCE_LSE RCC_CFGR3_USART2SW_LSE
+#define RCC_USART2CLKSOURCE_HSI RCC_CFGR3_USART2SW_HSI
+
+/**
+ * @}
+ */
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @defgroup RCCEx_USART3_Clock_Source RCCEx USART3 Clock Source
+ * @{
+ */
+#define RCC_USART3CLKSOURCE_PCLK1 RCC_CFGR3_USART3SW_PCLK
+#define RCC_USART3CLKSOURCE_SYSCLK RCC_CFGR3_USART3SW_SYSCLK
+#define RCC_USART3CLKSOURCE_LSE RCC_CFGR3_USART3SW_LSE
+#define RCC_USART3CLKSOURCE_HSI RCC_CFGR3_USART3SW_HSI
+
+/**
+ * @}
+ */
+
+#endif /* STM32F091xC || STM32F098xx */
+
+
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @defgroup RCCEx_CEC_Clock_Source RCCEx CEC Clock Source
+ * @{
+ */
+#define RCC_CECCLKSOURCE_HSI RCC_CFGR3_CECSW_HSI_DIV244
+#define RCC_CECCLKSOURCE_LSE RCC_CFGR3_CECSW_LSE
+
+/**
+ * @}
+ */
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+/** @defgroup RCCEx_MCOx_Clock_Prescaler RCCEx MCOx Clock Prescaler
+ * @{
+ */
+
+#if defined(RCC_CFGR_MCOPRE)
+
+#define RCC_MCODIV_1 (0x00000000U)
+#define RCC_MCODIV_2 (0x10000000U)
+#define RCC_MCODIV_4 (0x20000000U)
+#define RCC_MCODIV_8 (0x30000000U)
+#define RCC_MCODIV_16 (0x40000000U)
+#define RCC_MCODIV_32 (0x50000000U)
+#define RCC_MCODIV_64 (0x60000000U)
+#define RCC_MCODIV_128 (0x70000000U)
+
+#else
+
+#define RCC_MCODIV_1 (0x00000000U)
+
+#endif /* RCC_CFGR_MCOPRE */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_LSEDrive_Configuration RCC LSE Drive Configuration
+ * @{
+ */
+
+#define RCC_LSEDRIVE_LOW (0x00000000U) /*!< Xtal mode lower driving capability */
+#define RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_1 /*!< Xtal mode medium low driving capability */
+#define RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_0 /*!< Xtal mode medium high driving capability */
+#define RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV /*!< Xtal mode higher driving capability */
+
+/**
+ * @}
+ */
+
+#if defined(CRS)
+
+/** @defgroup RCCEx_CRS_Status RCCEx CRS Status
+ * @{
+ */
+#define RCC_CRS_NONE (0x00000000U)
+#define RCC_CRS_TIMEOUT (0x00000001U)
+#define RCC_CRS_SYNCOK (0x00000002U)
+#define RCC_CRS_SYNCWARN (0x00000004U)
+#define RCC_CRS_SYNCERR (0x00000008U)
+#define RCC_CRS_SYNCMISS (0x00000010U)
+#define RCC_CRS_TRIMOVF (0x00000020U)
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_SynchroSource RCCEx CRS Synchronization Source
+ * @{
+ */
+#define RCC_CRS_SYNC_SOURCE_GPIO (0x00000000U) /*!< Synchro Signal source GPIO */
+#define RCC_CRS_SYNC_SOURCE_LSE CRS_CFGR_SYNCSRC_0 /*!< Synchro Signal source LSE */
+#define RCC_CRS_SYNC_SOURCE_USB CRS_CFGR_SYNCSRC_1 /*!< Synchro Signal source USB SOF (default)*/
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_SynchroDivider RCCEx CRS Synchronization Divider
+ * @{
+ */
+#define RCC_CRS_SYNC_DIV1 (0x00000000U) /*!< Synchro Signal not divided (default) */
+#define RCC_CRS_SYNC_DIV2 CRS_CFGR_SYNCDIV_0 /*!< Synchro Signal divided by 2 */
+#define RCC_CRS_SYNC_DIV4 CRS_CFGR_SYNCDIV_1 /*!< Synchro Signal divided by 4 */
+#define RCC_CRS_SYNC_DIV8 (CRS_CFGR_SYNCDIV_1 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 8 */
+#define RCC_CRS_SYNC_DIV16 CRS_CFGR_SYNCDIV_2 /*!< Synchro Signal divided by 16 */
+#define RCC_CRS_SYNC_DIV32 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 32 */
+#define RCC_CRS_SYNC_DIV64 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_1) /*!< Synchro Signal divided by 64 */
+#define RCC_CRS_SYNC_DIV128 CRS_CFGR_SYNCDIV /*!< Synchro Signal divided by 128 */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_SynchroPolarity RCCEx CRS Synchronization Polarity
+ * @{
+ */
+#define RCC_CRS_SYNC_POLARITY_RISING (0x00000000U) /*!< Synchro Active on rising edge (default) */
+#define RCC_CRS_SYNC_POLARITY_FALLING CRS_CFGR_SYNCPOL /*!< Synchro Active on falling edge */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_ReloadValueDefault RCCEx CRS Default Reload Value
+ * @{
+ */
+#define RCC_CRS_RELOADVALUE_DEFAULT (0x0000BB7FU) /*!< The reset value of the RELOAD field corresponds
+ to a target frequency of 48 MHz and a synchronization signal frequency of 1 kHz (SOF signal from USB). */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_ErrorLimitDefault RCCEx CRS Default Error Limit Value
+ * @{
+ */
+#define RCC_CRS_ERRORLIMIT_DEFAULT (0x00000022U) /*!< Default Frequency error limit */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_HSI48CalibrationDefault RCCEx CRS Default HSI48 Calibration vakye
+ * @{
+ */
+#define RCC_CRS_HSI48CALIBRATION_DEFAULT (0x00000020U) /*!< The default value is 32, which corresponds to the middle of the trimming interval.
+ The trimming step is around 67 kHz between two consecutive TRIM steps. A higher TRIM value
+ corresponds to a higher output frequency */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_FreqErrorDirection RCCEx CRS Frequency Error Direction
+ * @{
+ */
+#define RCC_CRS_FREQERRORDIR_UP (0x00000000U) /*!< Upcounting direction, the actual frequency is above the target */
+#define RCC_CRS_FREQERRORDIR_DOWN ((uint32_t)CRS_ISR_FEDIR) /*!< Downcounting direction, the actual frequency is below the target */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_Interrupt_Sources RCCEx CRS Interrupt Sources
+ * @{
+ */
+#define RCC_CRS_IT_SYNCOK CRS_CR_SYNCOKIE /*!< SYNC event OK */
+#define RCC_CRS_IT_SYNCWARN CRS_CR_SYNCWARNIE /*!< SYNC warning */
+#define RCC_CRS_IT_ERR CRS_CR_ERRIE /*!< Error */
+#define RCC_CRS_IT_ESYNC CRS_CR_ESYNCIE /*!< Expected SYNC */
+#define RCC_CRS_IT_SYNCERR CRS_CR_ERRIE /*!< SYNC error */
+#define RCC_CRS_IT_SYNCMISS CRS_CR_ERRIE /*!< SYNC missed */
+#define RCC_CRS_IT_TRIMOVF CRS_CR_ERRIE /*!< Trimming overflow or underflow */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_Flags RCCEx CRS Flags
+ * @{
+ */
+#define RCC_CRS_FLAG_SYNCOK CRS_ISR_SYNCOKF /*!< SYNC event OK flag */
+#define RCC_CRS_FLAG_SYNCWARN CRS_ISR_SYNCWARNF /*!< SYNC warning flag */
+#define RCC_CRS_FLAG_ERR CRS_ISR_ERRF /*!< Error flag */
+#define RCC_CRS_FLAG_ESYNC CRS_ISR_ESYNCF /*!< Expected SYNC flag */
+#define RCC_CRS_FLAG_SYNCERR CRS_ISR_SYNCERR /*!< SYNC error */
+#define RCC_CRS_FLAG_SYNCMISS CRS_ISR_SYNCMISS /*!< SYNC missed*/
+#define RCC_CRS_FLAG_TRIMOVF CRS_ISR_TRIMOVF /*!< Trimming overflow or underflow */
+
+/**
+ * @}
+ */
+
+#endif /* CRS */
+
+/**
+ * @}
+ */
+
+/* Exported macros ------------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros
+ * @{
+ */
+
+/** @defgroup RCCEx_Peripheral_Clock_Enable_Disable RCCEx_Peripheral_Clock_Enable_Disable
+ * @brief Enables or disables the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#if defined(GPIOD)
+
+#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIODEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIODEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIODEN))
+
+#endif /* GPIOD */
+
+#if defined(GPIOE)
+
+#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOEEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOEEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOEEN))
+
+#endif /* GPIOE */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_TSC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_TSCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_TSCEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_TSC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_TSCEN))
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_DMA2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA2EN))
+
+#endif /* STM32F091xC || STM32F098xx */
+
+/** @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#if defined(STM32F030x8)\
+ || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_USART2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN))
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || STM32F070x6 || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F030x8)\
+ || defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_SPI2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F031x6) || defined(STM32F038xx)\
+ || defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_TIM2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
+
+#endif /* STM32F031x6 || STM32F038xx || */
+ /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F030x8) \
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_TIM6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_I2C2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
+
+#endif /* STM32F030x8 || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_DAC1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_DAC1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
+
+#endif /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_CEC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_CEC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN))
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_TIM7_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_USART3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_USART4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART4EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
+#define __HAL_RCC_USART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART4EN))
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\
+ || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
+
+#define __HAL_RCC_USB_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USBEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USBEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_USB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USBEN))
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 || */
+ /* STM32F072xB || STM32F078xx || STM32F070xB */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_CAN1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CANEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CANEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CANEN))
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(CRS)
+
+#define __HAL_RCC_CRS_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CRSEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CRSEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_CRS_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CRSEN))
+
+#endif /* CRS */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_USART5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART5EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_USART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART5EN))
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+/** @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#if defined(STM32F030x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_TIM15_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_TIM15_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM15EN))
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_USART6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_USART6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART6EN))
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_USART7_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART7EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART7EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_USART8_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART8EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART8EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_USART7_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART7EN))
+#define __HAL_RCC_USART8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART8EN))
+
+#endif /* STM32F091xC || STM32F098xx */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup RCCEx_Force_Release_Peripheral_Reset RCCEx Force Release Peripheral Reset
+ * @brief Forces or releases peripheral reset.
+ * @{
+ */
+
+/** @brief Force or release AHB peripheral reset.
+ */
+#if defined(GPIOD)
+
+#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIODRST))
+
+#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIODRST))
+
+#endif /* GPIOD */
+
+#if defined(GPIOE)
+
+#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOERST))
+
+#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOERST))
+
+#endif /* GPIOE */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_TSC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_TSCRST))
+
+#define __HAL_RCC_TSC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_TSCRST))
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+/** @brief Force or release APB1 peripheral reset.
+ */
+#if defined(STM32F030x8) \
+ || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST))
+#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
+
+#define __HAL_RCC_USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST))
+#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F031x6) || defined(STM32F038xx)\
+ || defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
+
+#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
+
+#endif /* STM32F031x6 || STM32F038xx || */
+ /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F030x8) \
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
+
+#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
+
+#endif /* STM32F030x8 || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_DAC1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
+
+#define __HAL_RCC_DAC1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
+
+#endif /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_CEC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST))
+
+#define __HAL_RCC_CEC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST))
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_USART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART4RST))
+
+#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_USART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART4RST))
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\
+ || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
+
+#define __HAL_RCC_USB_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USBRST))
+
+#define __HAL_RCC_USB_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USBRST))
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 || */
+ /* STM32F072xB || STM32F078xx || STM32F070xB */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CANRST))
+
+#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CANRST))
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(CRS)
+
+#define __HAL_RCC_CRS_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CRSRST))
+
+#define __HAL_RCC_CRS_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CRSRST))
+
+#endif /* CRS */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_USART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART5RST))
+
+#define __HAL_RCC_USART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART5RST))
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+
+/** @brief Force or release APB2 peripheral reset.
+ */
+#if defined(STM32F030x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_TIM15_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM15RST))
+
+#define __HAL_RCC_TIM15_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM15RST))
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_USART6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST))
+
+#define __HAL_RCC_USART6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST))
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_USART7_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART7RST))
+#define __HAL_RCC_USART8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART8RST))
+
+#define __HAL_RCC_USART7_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART7RST))
+#define __HAL_RCC_USART8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART8RST))
+
+#endif /* STM32F091xC || STM32F098xx */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_Peripheral_Clock_Enable_Disable_Status Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+/** @brief AHB Peripheral Clock Enable Disable Status
+ */
+#if defined(GPIOD)
+
+#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIODEN)) != RESET)
+#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIODEN)) == RESET)
+
+#endif /* GPIOD */
+
+#if defined(GPIOE)
+
+#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOEEN)) != RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOEEN)) == RESET)
+
+#endif /* GPIOE */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_TSC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_TSCEN)) != RESET)
+#define __HAL_RCC_TSC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_TSCEN)) == RESET)
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_DMA2_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) != RESET)
+#define __HAL_RCC_DMA2_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) == RESET)
+
+#endif /* STM32F091xC || STM32F098xx */
+
+/** @brief APB1 Peripheral Clock Enable Disable Status
+ */
+#if defined(STM32F030x8)\
+ || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_USART2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) != RESET)
+#define __HAL_RCC_USART2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) == RESET)
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || STM32F070x6 || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F030x8)\
+ || defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_SPI2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) != RESET)
+#define __HAL_RCC_SPI2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) == RESET)
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F031x6) || defined(STM32F038xx)\
+ || defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET)
+#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET)
+
+#endif /* STM32F031x6 || STM32F038xx || */
+ /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F030x8) \
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET)
+#define __HAL_RCC_I2C2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) != RESET)
+#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET)
+#define __HAL_RCC_I2C2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) == RESET)
+
+#endif /* STM32F030x8 || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_DAC1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DAC1EN)) != RESET)
+#define __HAL_RCC_DAC1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DAC1EN)) == RESET)
+
+#endif /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_CEC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) != RESET)
+#define __HAL_RCC_CEC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) == RESET)
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET)
+#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET)
+#define __HAL_RCC_USART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART4EN)) != RESET)
+#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET)
+#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET)
+#define __HAL_RCC_USART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART4EN)) == RESET)
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\
+ || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
+
+#define __HAL_RCC_USB_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USBEN)) != RESET)
+#define __HAL_RCC_USB_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USBEN)) == RESET)
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 || */
+ /* STM32F072xB || STM32F078xx || STM32F070xB */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET)
+#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET)
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(CRS)
+
+#define __HAL_RCC_CRS_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CRSEN)) != RESET)
+#define __HAL_RCC_CRS_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CRSEN)) == RESET)
+
+#endif /* CRS */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_USART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART5EN)) != RESET)
+#define __HAL_RCC_USART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART5EN)) == RESET)
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+/** @brief APB1 Peripheral Clock Enable Disable Status
+ */
+#if defined(STM32F030x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_TIM15_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM15EN)) != RESET)
+#define __HAL_RCC_TIM15_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM15EN)) == RESET)
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_USART6_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) != RESET)
+#define __HAL_RCC_USART6_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) == RESET)
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_USART7_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART7EN)) != RESET)
+#define __HAL_RCC_USART8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART8EN)) != RESET)
+#define __HAL_RCC_USART7_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART7EN)) == RESET)
+#define __HAL_RCC_USART8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART8EN)) == RESET)
+
+#endif /* STM32F091xC || STM32F098xx */
+/**
+ * @}
+ */
+
+
+/** @defgroup RCCEx_HSI48_Enable_Disable RCCEx HSI48 Enable Disable
+ * @brief Macros to enable or disable the Internal 48Mhz High Speed oscillator (HSI48).
+ * @note The HSI48 is stopped by hardware when entering STOP and STANDBY modes.
+ * @note HSI48 can not be stopped if it is used as system clock source. In this case,
+ * you have to select another source of the system clock then stop the HSI14.
+ * @note After enabling the HSI48 with __HAL_RCC_HSI48_ENABLE(), the application software
+ * should wait on HSI48RDY flag to be set indicating that HSI48 clock is stable and can be
+ * used as system clock source. This is not necessary if HAL_RCC_OscConfig() is used.
+ * @note When the HSI48 is stopped, HSI48RDY flag goes low after 6 HSI48 oscillator
+ * clock cycles.
+ * @{
+ */
+#if defined(RCC_HSI48_SUPPORT)
+
+#define __HAL_RCC_HSI48_ENABLE() SET_BIT(RCC->CR2, RCC_CR2_HSI48ON)
+#define __HAL_RCC_HSI48_DISABLE() CLEAR_BIT(RCC->CR2, RCC_CR2_HSI48ON)
+
+/** @brief Macro to get the Internal 48Mhz High Speed oscillator (HSI48) state.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_HSI48_ON HSI48 enabled
+ * @arg @ref RCC_HSI48_OFF HSI48 disabled
+ */
+#define __HAL_RCC_GET_HSI48_STATE() \
+ (((uint32_t)(READ_BIT(RCC->CR2, RCC_CR2_HSI48ON)) != RESET) ? RCC_HSI48_ON : RCC_HSI48_OFF)
+
+#endif /* RCC_HSI48_SUPPORT */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_Peripheral_Clock_Source_Config RCCEx Peripheral Clock Source Config
+ * @{
+ */
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F070x6) || defined(STM32F070xB)
+
+/** @brief Macro to configure the USB clock (USBCLK).
+ * @param __USBCLKSOURCE__ specifies the USB clock source.
+ * This parameter can be one of the following values:
+@if STM32F070xB
+@elseif STM32F070x6
+@else
+ * @arg @ref RCC_USBCLKSOURCE_HSI48 HSI48 selected as USB clock
+@endif
+ * @arg @ref RCC_USBCLKSOURCE_PLL PLL Clock selected as USB clock
+ */
+#define __HAL_RCC_USB_CONFIG(__USBCLKSOURCE__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USBSW, (uint32_t)(__USBCLKSOURCE__))
+
+/** @brief Macro to get the USB clock source.
+ * @retval The clock source can be one of the following values:
+@if STM32F070xB
+@elseif STM32F070x6
+@else
+ * @arg @ref RCC_USBCLKSOURCE_HSI48 HSI48 selected as USB clock
+@endif
+ * @arg @ref RCC_USBCLKSOURCE_PLL PLL Clock selected as USB clock
+ */
+#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USBSW)))
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F072xB || STM32F078xx || */
+ /* STM32F070x6 || STM32F070xB */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @brief Macro to configure the CEC clock.
+ * @param __CECCLKSOURCE__ specifies the CEC clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_CECCLKSOURCE_HSI HSI selected as CEC clock
+ * @arg @ref RCC_CECCLKSOURCE_LSE LSE selected as CEC clock
+ */
+#define __HAL_RCC_CEC_CONFIG(__CECCLKSOURCE__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_CECSW, (uint32_t)(__CECCLKSOURCE__))
+
+/** @brief Macro to get the HDMI CEC clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_CECCLKSOURCE_HSI HSI selected as CEC clock
+ * @arg @ref RCC_CECCLKSOURCE_LSE LSE selected as CEC clock
+ */
+#define __HAL_RCC_GET_CEC_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_CECSW)))
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || defined(STM32F098xx) */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+/** @brief Macro to configure the USART2 clock (USART2CLK).
+ * @param __USART2CLKSOURCE__ specifies the USART2 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock
+ */
+#define __HAL_RCC_USART2_CONFIG(__USART2CLKSOURCE__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART2SW, (uint32_t)(__USART2CLKSOURCE__))
+
+/** @brief Macro to get the USART2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock
+ */
+#define __HAL_RCC_GET_USART2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART2SW)))
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx*/
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+/** @brief Macro to configure the USART3 clock (USART3CLK).
+ * @param __USART3CLKSOURCE__ specifies the USART3 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_USART3CLKSOURCE_PCLK1 PCLK1 selected as USART3 clock
+ * @arg @ref RCC_USART3CLKSOURCE_HSI HSI selected as USART3 clock
+ * @arg @ref RCC_USART3CLKSOURCE_SYSCLK System Clock selected as USART3 clock
+ * @arg @ref RCC_USART3CLKSOURCE_LSE LSE selected as USART3 clock
+ */
+#define __HAL_RCC_USART3_CONFIG(__USART3CLKSOURCE__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART3SW, (uint32_t)(__USART3CLKSOURCE__))
+
+/** @brief Macro to get the USART3 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_USART3CLKSOURCE_PCLK1 PCLK1 selected as USART3 clock
+ * @arg @ref RCC_USART3CLKSOURCE_HSI HSI selected as USART3 clock
+ * @arg @ref RCC_USART3CLKSOURCE_SYSCLK System Clock selected as USART3 clock
+ * @arg @ref RCC_USART3CLKSOURCE_LSE LSE selected as USART3 clock
+ */
+#define __HAL_RCC_GET_USART3_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART3SW)))
+
+#endif /* STM32F091xC || STM32F098xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_LSE_Configuration LSE Drive Configuration
+ * @{
+ */
+
+/**
+ * @brief Macro to configure the External Low Speed oscillator (LSE) drive capability.
+ * @param __RCC_LSEDRIVE__ specifies the new state of the LSE drive capability.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_LSEDRIVE_LOW LSE oscillator low drive capability.
+ * @arg @ref RCC_LSEDRIVE_MEDIUMLOW LSE oscillator medium low drive capability.
+ * @arg @ref RCC_LSEDRIVE_MEDIUMHIGH LSE oscillator medium high drive capability.
+ * @arg @ref RCC_LSEDRIVE_HIGH LSE oscillator high drive capability.
+ * @retval None
+ */
+#define __HAL_RCC_LSEDRIVE_CONFIG(__RCC_LSEDRIVE__) (MODIFY_REG(RCC->BDCR,\
+ RCC_BDCR_LSEDRV, (uint32_t)(__RCC_LSEDRIVE__) ))
+
+/**
+ * @}
+ */
+
+#if defined(CRS)
+
+/** @defgroup RCCEx_IT_And_Flag RCCEx IT and Flag
+ * @{
+ */
+/* Interrupt & Flag management */
+
+/**
+ * @brief Enable the specified CRS interrupts.
+ * @param __INTERRUPT__ specifies the CRS interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt
+ * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt
+ * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt
+ * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt
+ * @retval None
+ */
+#define __HAL_RCC_CRS_ENABLE_IT(__INTERRUPT__) SET_BIT(CRS->CR, (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified CRS interrupts.
+ * @param __INTERRUPT__ specifies the CRS interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt
+ * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt
+ * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt
+ * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt
+ * @retval None
+ */
+#define __HAL_RCC_CRS_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(CRS->CR, (__INTERRUPT__))
+
+/** @brief Check whether the CRS interrupt has occurred or not.
+ * @param __INTERRUPT__ specifies the CRS interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt
+ * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt
+ * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt
+ * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt
+ * @retval The new state of __INTERRUPT__ (SET or RESET).
+ */
+#define __HAL_RCC_CRS_GET_IT_SOURCE(__INTERRUPT__) ((READ_BIT(CRS->CR, (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+/** @brief Clear the CRS interrupt pending bits
+ * @param __INTERRUPT__ specifies the interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt
+ * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt
+ * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt
+ * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt
+ * @arg @ref RCC_CRS_IT_TRIMOVF Trimming overflow or underflow interrupt
+ * @arg @ref RCC_CRS_IT_SYNCERR SYNC error interrupt
+ * @arg @ref RCC_CRS_IT_SYNCMISS SYNC missed interrupt
+ */
+#define __HAL_RCC_CRS_CLEAR_IT(__INTERRUPT__) do { \
+ if(((__INTERRUPT__) & RCC_CRS_IT_ERROR_MASK) != RESET) \
+ { \
+ WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__INTERRUPT__) & ~RCC_CRS_IT_ERROR_MASK)); \
+ } \
+ else \
+ { \
+ WRITE_REG(CRS->ICR, (__INTERRUPT__)); \
+ } \
+ } while(0U)
+
+/**
+ * @brief Check whether the specified CRS flag is set or not.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_CRS_FLAG_SYNCOK SYNC event OK
+ * @arg @ref RCC_CRS_FLAG_SYNCWARN SYNC warning
+ * @arg @ref RCC_CRS_FLAG_ERR Error
+ * @arg @ref RCC_CRS_FLAG_ESYNC Expected SYNC
+ * @arg @ref RCC_CRS_FLAG_TRIMOVF Trimming overflow or underflow
+ * @arg @ref RCC_CRS_FLAG_SYNCERR SYNC error
+ * @arg @ref RCC_CRS_FLAG_SYNCMISS SYNC missed
+ * @retval The new state of _FLAG_ (TRUE or FALSE).
+ */
+#define __HAL_RCC_CRS_GET_FLAG(__FLAG__) (READ_BIT(CRS->ISR, (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear the CRS specified FLAG.
+ * @param __FLAG__ specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_CRS_FLAG_SYNCOK SYNC event OK
+ * @arg @ref RCC_CRS_FLAG_SYNCWARN SYNC warning
+ * @arg @ref RCC_CRS_FLAG_ERR Error
+ * @arg @ref RCC_CRS_FLAG_ESYNC Expected SYNC
+ * @arg @ref RCC_CRS_FLAG_TRIMOVF Trimming overflow or underflow
+ * @arg @ref RCC_CRS_FLAG_SYNCERR SYNC error
+ * @arg @ref RCC_CRS_FLAG_SYNCMISS SYNC missed
+ * @note RCC_CRS_FLAG_ERR clears RCC_CRS_FLAG_TRIMOVF, RCC_CRS_FLAG_SYNCERR, RCC_CRS_FLAG_SYNCMISS and consequently RCC_CRS_FLAG_ERR
+ * @retval None
+ */
+#define __HAL_RCC_CRS_CLEAR_FLAG(__FLAG__) do { \
+ if(((__FLAG__) & RCC_CRS_FLAG_ERROR_MASK) != RESET) \
+ { \
+ WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__FLAG__) & ~RCC_CRS_FLAG_ERROR_MASK)); \
+ } \
+ else \
+ { \
+ WRITE_REG(CRS->ICR, (__FLAG__)); \
+ } \
+ } while(0U)
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_Extended_Features RCCEx CRS Extended Features
+ * @{
+ */
+/**
+ * @brief Enable the oscillator clock for frequency error counter.
+ * @note when the CEN bit is set the CRS_CFGR register becomes write-protected.
+ * @retval None
+ */
+#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE() SET_BIT(CRS->CR, CRS_CR_CEN)
+
+/**
+ * @brief Disable the oscillator clock for frequency error counter.
+ * @retval None
+ */
+#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_CEN)
+
+/**
+ * @brief Enable the automatic hardware adjustement of TRIM bits.
+ * @note When the AUTOTRIMEN bit is set the CRS_CFGR register becomes write-protected.
+ * @retval None
+ */
+#define __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE() SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN)
+
+/**
+ * @brief Disable the automatic hardware adjustement of TRIM bits.
+ * @retval None
+ */
+#define __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_AUTOTRIMEN)
+
+/**
+ * @brief Macro to calculate reload value to be set in CRS register according to target and sync frequencies
+ * @note The RELOAD value should be selected according to the ratio between the target frequency and the frequency
+ * of the synchronization source after prescaling. It is then decreased by one in order to
+ * reach the expected synchronization on the zero value. The formula is the following:
+ * RELOAD = (fTARGET / fSYNC) -1
+ * @param __FTARGET__ Target frequency (value in Hz)
+ * @param __FSYNC__ Synchronization signal frequency (value in Hz)
+ * @retval None
+ */
+#define __HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET__, __FSYNC__) (((__FTARGET__) / (__FSYNC__)) - 1U)
+
+/**
+ * @}
+ */
+
+#endif /* CRS */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RCCEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RCCEx_Exported_Functions_Group1
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk);
+
+/**
+ * @}
+ */
+
+#if defined(CRS)
+
+/** @addtogroup RCCEx_Exported_Functions_Group3
+ * @{
+ */
+
+void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit);
+void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void);
+void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo);
+uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout);
+void HAL_RCCEx_CRS_IRQHandler(void);
+void HAL_RCCEx_CRS_SyncOkCallback(void);
+void HAL_RCCEx_CRS_SyncWarnCallback(void);
+void HAL_RCCEx_CRS_ExpectedSyncCallback(void);
+void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error);
+
+/**
+ * @}
+ */
+
+#endif /* CRS */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_RCC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|