diff options
Diffstat (limited to 'fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source')
67 files changed, 13937 insertions, 0 deletions
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f030x6.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f030x6.s new file mode 100644 index 0000000..c89426e --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f030x6.s @@ -0,0 +1,230 @@ +;*******************************************************************************
+;* File Name : startup_stm32f030x6.s
+;* Author : MCD Application Team
+;* Description : STM32F030x4/STM32F030x6 devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD 0 ; Reserved
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD 0 ; Reserved
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_IRQHandler ; ADC1
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD 0 ; Reserved
+ DCD TIM3_IRQHandler ; TIM3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM14_IRQHandler ; TIM14
+ DCD 0 ; Reserved
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD 0 ; Reserved
+ DCD SPI1_IRQHandler ; SPI1
+ DCD 0 ; Reserved
+ DCD USART1_IRQHandler ; USART1
+
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_5_IRQHandler [WEAK]
+ EXPORT ADC1_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_IRQHandler
+ADC1_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM3_IRQHandler
+TIM14_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+SPI1_IRQHandler
+USART1_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f030x8.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f030x8.s new file mode 100644 index 0000000..02aff1e --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f030x8.s @@ -0,0 +1,240 @@ +;*******************************************************************************
+;* File Name : startup_stm32f030x8.s
+;* Author : MCD Application Team
+;* Description : STM32F030x8 devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD 0 ; Reserved
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD 0 ; Reserved
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_IRQHandler ; ADC1
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD 0 ; Reserved
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM6_IRQHandler ; TIM6
+ DCD 0 ; Reserved
+ DCD TIM14_IRQHandler ; TIM14
+ DCD TIM15_IRQHandler ; TIM15
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD I2C2_IRQHandler ; I2C2
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_5_IRQHandler [WEAK]
+ EXPORT ADC1_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM6_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM15_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT I2C2_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_IRQHandler
+ADC1_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM3_IRQHandler
+TIM6_IRQHandler
+TIM14_IRQHandler
+TIM15_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f030xc.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f030xc.s new file mode 100644 index 0000000..bc3c745 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f030xc.s @@ -0,0 +1,245 @@ +;*******************************************************************************
+;* File Name : startup_stm32f030xc.s
+;* Author : MCD Application Team
+;* Description : STM32F030xc/STM32F030xb devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD 0 ; Reserved
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD 0 ; Reserved
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_IRQHandler ; ADC1
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD 0 ; Reserved
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM6_IRQHandler ; TIM6
+ DCD TIM7_IRQHandler ; TIM7
+ DCD TIM14_IRQHandler ; TIM14
+ DCD TIM15_IRQHandler ; TIM15
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD I2C2_IRQHandler ; I2C2
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_6_IRQHandler ; USART3, USART4, USART5, USART6
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_5_IRQHandler [WEAK]
+ EXPORT ADC1_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM6_IRQHandler [WEAK]
+ EXPORT TIM7_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM15_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT I2C2_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT USART3_6_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_IRQHandler
+ADC1_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM3_IRQHandler
+TIM6_IRQHandler
+TIM7_IRQHandler
+TIM14_IRQHandler
+TIM15_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_6_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f031x6.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f031x6.s new file mode 100644 index 0000000..0f01cdd --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f031x6.s @@ -0,0 +1,234 @@ +;*******************************************************************************
+;* File Name : startup_stm32f031x6.s
+;* Author : MCD Application Team
+;* Description : STM32F031x4/STM32F031x6 devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detect
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD 0 ; Reserved
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_IRQHandler ; ADC1
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM14_IRQHandler ; TIM14
+ DCD 0 ; Reserved
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD 0 ; Reserved
+ DCD SPI1_IRQHandler ; SPI1
+ DCD 0 ; Reserved
+ DCD USART1_IRQHandler ; USART1
+
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_5_IRQHandler [WEAK]
+ EXPORT ADC1_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+PVD_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_IRQHandler
+ADC1_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM14_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+SPI1_IRQHandler
+USART1_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f038xx.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f038xx.s new file mode 100644 index 0000000..ac7a40d --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f038xx.s @@ -0,0 +1,232 @@ +;*******************************************************************************
+;* File Name : startup_stm32f038xx.s
+;* Author : MCD Application Team
+;* Description : STM32F038xx devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD 0 ; Reserved
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD 0 ; Reserved
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_IRQHandler ; ADC1
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM14_IRQHandler ; TIM14
+ DCD 0 ; Reserved
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD 0 ; Reserved
+ DCD SPI1_IRQHandler ; SPI1
+ DCD 0 ; Reserved
+ DCD USART1_IRQHandler ; USART1
+
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_5_IRQHandler [WEAK]
+ EXPORT ADC1_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_IRQHandler
+ADC1_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM14_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+SPI1_IRQHandler
+USART1_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f042x6.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f042x6.s new file mode 100644 index 0000000..8ff3823 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f042x6.s @@ -0,0 +1,275 @@ +;*******************************************************************************
+;* File Name : startup_stm32f042x6.s
+;* Author : MCD Application Team
+;* Description : STM32F042x4/STM32F042x6 devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_CRS_IRQHandler ; RCC and CRS
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD TSC_IRQHandler ; TS
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_IRQHandler ; ADC1
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM14_IRQHandler ; TIM14
+ DCD 0 ; Reserved
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD 0 ; Reserved
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD 0 ; Reserved
+ DCD CEC_CAN_IRQHandler ; CEC and CAN
+ DCD USB_IRQHandler ; USB
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+
+
+
+ LDR R0, =__initial_sp ; set stack pointer
+ MSR MSP, R0
+
+;;Check if boot space corresponds to test memory
+
+ LDR R0,=0x00000004
+ LDR R1, [R0]
+ LSRS R1, R1, #24
+ LDR R2,=0x1F
+ CMP R1, R2
+
+ BNE ApplicationStart
+
+;; SYSCFG clock enable
+
+ LDR R0,=0x40021018
+ LDR R1,=0x00000001
+ STR R1, [R0]
+
+;; Set CFGR1 register with flash memory remap at address 0
+
+ LDR R0,=0x40010000
+ LDR R1,=0x00000000
+ STR R1, [R0]
+ApplicationStart
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_VDDIO2_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_CRS_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT TSC_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_5_IRQHandler [WEAK]
+ EXPORT ADC1_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT CEC_CAN_IRQHandler [WEAK]
+ EXPORT USB_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+PVD_VDDIO2_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_CRS_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+TSC_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_IRQHandler
+ADC1_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM14_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+CEC_CAN_IRQHandler
+USB_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f048xx.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f048xx.s new file mode 100644 index 0000000..45816f9 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f048xx.s @@ -0,0 +1,247 @@ +;*******************************************************************************
+;* File Name : startup_stm32f048xx.s
+;* Author : MCD Application Team
+;* Description : STM32F048xx devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD VDDIO2_IRQHandler ; VDDIO2 Monitor through EXTI Line 31
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_CRS_IRQHandler ; RCC and CRS
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD TSC_IRQHandler ; TS
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_IRQHandler ; ADC1
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM14_IRQHandler ; TIM14
+ DCD 0 ; Reserved
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD 0 ; Reserved
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD 0 ; Reserved
+ DCD CEC_CAN_IRQHandler ; CEC and CAN
+ DCD USB_IRQHandler ; USB
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT VDDIO2_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_CRS_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT TSC_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_5_IRQHandler [WEAK]
+ EXPORT ADC1_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT CEC_CAN_IRQHandler [WEAK]
+ EXPORT USB_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+VDDIO2_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_CRS_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+TSC_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_IRQHandler
+ADC1_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM14_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+CEC_CAN_IRQHandler
+USB_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f051x8.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f051x8.s new file mode 100644 index 0000000..783b327 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f051x8.s @@ -0,0 +1,250 @@ +;*******************************************************************************
+;* File Name : startup_stm32f051x8.s
+;* Author : MCD Application Team
+;* Description : STM32F051x4/STM32F051x6/STM32F051x8 devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detect
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD TSC_IRQHandler ; TS
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
+ DCD 0 ; Reserved
+ DCD TIM14_IRQHandler ; TIM14
+ DCD TIM15_IRQHandler ; TIM15
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD I2C2_IRQHandler ; I2C2
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD 0 ; Reserved
+ DCD CEC_IRQHandler ; CEC
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT TSC_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_5_IRQHandler [WEAK]
+ EXPORT ADC1_COMP_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM6_DAC_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM15_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT I2C2_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT CEC_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+PVD_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+TSC_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_IRQHandler
+ADC1_COMP_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM6_DAC_IRQHandler
+TIM14_IRQHandler
+TIM15_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+CEC_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f058xx.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f058xx.s new file mode 100644 index 0000000..5a41a8e --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f058xx.s @@ -0,0 +1,248 @@ +;*******************************************************************************
+;* File Name : startup_stm32f058xx.s
+;* Author : MCD Application Team
+;* Description : STM32F058xx devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD 0 ; Reserved
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD TSC_IRQHandler ; TS
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
+ DCD 0 ; Reserved
+ DCD TIM14_IRQHandler ; TIM14
+ DCD TIM15_IRQHandler ; TIM15
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD I2C2_IRQHandler ; I2C2
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD 0 ; Reserved
+ DCD CEC_IRQHandler ; CEC
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT TSC_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_5_IRQHandler [WEAK]
+ EXPORT ADC1_COMP_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM6_DAC_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM15_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT I2C2_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT CEC_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+TSC_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_IRQHandler
+ADC1_COMP_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM6_DAC_IRQHandler
+TIM14_IRQHandler
+TIM15_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+CEC_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f070x6.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f070x6.s new file mode 100644 index 0000000..d78bb2f --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f070x6.s @@ -0,0 +1,265 @@ +;*******************************************************************************
+;* File Name : startup_stm32f070x6.s
+;* Author : MCD Application Team
+;* Description : STM32F070x4/STM32F070x6 devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD 0 ; Reserved
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD 0 ; Reserved
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_IRQHandler ; ADC1
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD 0 ; Reserved
+ DCD TIM3_IRQHandler ; TIM3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM14_IRQHandler ; TIM14
+ DCD 0 ; Reserved
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD 0 ; Reserved
+ DCD SPI1_IRQHandler ; SPI1
+ DCD 0 ; Reserved
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD USB_IRQHandler ; USB
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+
+
+
+ LDR R0, =__initial_sp ; set stack pointer
+ MSR MSP, R0
+
+;;Check if boot space corresponds to test memory
+
+ LDR R0,=0x00000004
+ LDR R1, [R0]
+ LSRS R1, R1, #24
+ LDR R2,=0x1F
+ CMP R1, R2
+
+ BNE ApplicationStart
+
+;; SYSCFG clock enable
+
+ LDR R0,=0x40021018
+ LDR R1,=0x00000001
+ STR R1, [R0]
+
+;; Set CFGR1 register with flash memory remap at address 0
+
+ LDR R0,=0x40010000
+ LDR R1,=0x00000000
+ STR R1, [R0]
+ApplicationStart
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_5_IRQHandler [WEAK]
+ EXPORT ADC1_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT USB_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_IRQHandler
+ADC1_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM3_IRQHandler
+TIM14_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+SPI1_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USB_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f070xb.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f070xb.s new file mode 100644 index 0000000..3967557 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f070xb.s @@ -0,0 +1,249 @@ +;*******************************************************************************
+;* File Name : startup_stm32f070xb.s
+;* Author : MCD Application Team
+;* Description : STM32F070x8/STM32F070xB devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD 0 ; Reserved
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD 0 ; Reserved
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_IRQHandler ; ADC1
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD 0 ; Reserved
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM6_IRQHandler ; TIM6
+ DCD TIM7_IRQHandler ; TIM7
+ DCD TIM14_IRQHandler ; TIM14
+ DCD TIM15_IRQHandler ; TIM15
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD I2C2_IRQHandler ; I2C2
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_4_IRQHandler ; USART3 & USART4
+ DCD 0 ; Reserved
+ DCD USB_IRQHandler ; USB
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_5_IRQHandler [WEAK]
+ EXPORT ADC1_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM6_IRQHandler [WEAK]
+ EXPORT TIM7_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM15_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT I2C2_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT USART3_4_IRQHandler [WEAK]
+ EXPORT USB_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_IRQHandler
+ADC1_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM3_IRQHandler
+TIM6_IRQHandler
+TIM7_IRQHandler
+TIM14_IRQHandler
+TIM15_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_4_IRQHandler
+USB_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f071xb.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f071xb.s new file mode 100644 index 0000000..b546be5 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f071xb.s @@ -0,0 +1,254 @@ +;*******************************************************************************
+;* File Name : startup_stm32f071xb.s
+;* Author : MCD Application Team
+;* Description : STM32F071x8/STM32F071xB devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_CRS_IRQHandler ; RCC and CRS
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD TSC_IRQHandler ; TS
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7
+ DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
+ DCD TIM7_IRQHandler ; TIM7
+ DCD TIM14_IRQHandler ; TIM14
+ DCD TIM15_IRQHandler ; TIM15
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD I2C2_IRQHandler ; I2C2
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_4_IRQHandler ; USART3 & USART4
+ DCD CEC_IRQHandler ; CEC
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_VDDIO2_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_CRS_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT TSC_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_5_6_7_IRQHandler [WEAK]
+ EXPORT ADC1_COMP_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM6_DAC_IRQHandler [WEAK]
+ EXPORT TIM7_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM15_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT I2C2_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT USART3_4_IRQHandler [WEAK]
+ EXPORT CEC_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+PVD_VDDIO2_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_CRS_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+TSC_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_6_7_IRQHandler
+ADC1_COMP_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM6_DAC_IRQHandler
+TIM7_IRQHandler
+TIM14_IRQHandler
+TIM15_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_4_IRQHandler
+CEC_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f072xb.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f072xb.s new file mode 100644 index 0000000..57a8bca --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f072xb.s @@ -0,0 +1,257 @@ +;*******************************************************************************
+;* File Name : startup_stm32f072xb.s
+;* Author : MCD Application Team
+;* Description : STM32F072x8/STM32F072xB devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_CRS_IRQHandler ; RCC and CRS
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD TSC_IRQHandler ; TS
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7
+ DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
+ DCD TIM7_IRQHandler ; TIM7
+ DCD TIM14_IRQHandler ; TIM14
+ DCD TIM15_IRQHandler ; TIM15
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD I2C2_IRQHandler ; I2C2
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_4_IRQHandler ; USART3 & USART4
+ DCD CEC_CAN_IRQHandler ; CEC and CAN
+ DCD USB_IRQHandler ; USB
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_VDDIO2_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_CRS_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT TSC_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_5_6_7_IRQHandler [WEAK]
+ EXPORT ADC1_COMP_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM6_DAC_IRQHandler [WEAK]
+ EXPORT TIM7_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM15_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT I2C2_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT USART3_4_IRQHandler [WEAK]
+ EXPORT CEC_CAN_IRQHandler [WEAK]
+ EXPORT USB_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+PVD_VDDIO2_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_CRS_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+TSC_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_6_7_IRQHandler
+ADC1_COMP_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM6_DAC_IRQHandler
+TIM7_IRQHandler
+TIM14_IRQHandler
+TIM15_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_4_IRQHandler
+CEC_CAN_IRQHandler
+USB_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f078xx.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f078xx.s new file mode 100644 index 0000000..122a399 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f078xx.s @@ -0,0 +1,257 @@ +;*******************************************************************************
+;* File Name : startup_stm32f078xx.s
+;* Author : MCD Application Team
+;* Description : STM32F078xx devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD VDDIO2_IRQHandler ; VDDIO2 Monitor through EXTI Line 31
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_CRS_IRQHandler ; RCC and CRS
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD TSC_IRQHandler ; TS
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7
+ DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
+ DCD TIM7_IRQHandler ; TIM7
+ DCD TIM14_IRQHandler ; TIM14
+ DCD TIM15_IRQHandler ; TIM15
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD I2C2_IRQHandler ; I2C2
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_4_IRQHandler ; USART3 & USART4
+ DCD CEC_CAN_IRQHandler ; CEC and CAN
+ DCD USB_IRQHandler ; USB
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT VDDIO2_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_CRS_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT TSC_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_5_6_7_IRQHandler [WEAK]
+ EXPORT ADC1_COMP_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM6_DAC_IRQHandler [WEAK]
+ EXPORT TIM7_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM15_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT I2C2_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT USART3_4_IRQHandler [WEAK]
+ EXPORT CEC_CAN_IRQHandler [WEAK]
+ EXPORT USB_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+VDDIO2_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_CRS_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+TSC_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_6_7_IRQHandler
+ADC1_COMP_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM6_DAC_IRQHandler
+TIM7_IRQHandler
+TIM14_IRQHandler
+TIM15_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_4_IRQHandler
+CEC_CAN_IRQHandler
+USB_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f091xc.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f091xc.s new file mode 100644 index 0000000..a51cc74 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f091xc.s @@ -0,0 +1,254 @@ +;*******************************************************************************
+;* File Name : startup_stm32f091xc.s
+;* Author : MCD Application Team
+;* Description : STM32F091xc/STM32F098xc devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_CRS_IRQHandler ; RCC and CRS
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD TSC_IRQHandler ; TS
+ DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
+ DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
+ DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
+ DCD TIM7_IRQHandler ; TIM7
+ DCD TIM14_IRQHandler ; TIM14
+ DCD TIM15_IRQHandler ; TIM15
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD I2C2_IRQHandler ; I2C2
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
+ DCD CEC_CAN_IRQHandler ; CEC and CAN
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_VDDIO2_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_CRS_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT TSC_IRQHandler [WEAK]
+ EXPORT DMA1_Ch1_IRQHandler [WEAK]
+ EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
+ EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
+ EXPORT ADC1_COMP_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM6_DAC_IRQHandler [WEAK]
+ EXPORT TIM7_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM15_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT I2C2_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT USART3_8_IRQHandler [WEAK]
+ EXPORT CEC_CAN_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+PVD_VDDIO2_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_CRS_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+TSC_IRQHandler
+DMA1_Ch1_IRQHandler
+DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
+DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
+ADC1_COMP_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM6_DAC_IRQHandler
+TIM7_IRQHandler
+TIM14_IRQHandler
+TIM15_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_8_IRQHandler
+CEC_CAN_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f098xx.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f098xx.s new file mode 100644 index 0000000..44a03dd --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f098xx.s @@ -0,0 +1,254 @@ +;*******************************************************************************
+;* File Name : startup_stm32f098xx.s
+;* Author : MCD Application Team
+;* Description : STM32F098xx devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;* <<< Use Configuration Wizard in Context Menu >>>
+;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD VDDIO2_IRQHandler ; VDDIO2 Monitor through EXTI Line 31
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_CRS_IRQHandler ; RCC and CRS
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD TSC_IRQHandler ; TS
+ DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
+ DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
+ DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
+ DCD TIM7_IRQHandler ; TIM7
+ DCD TIM14_IRQHandler ; TIM14
+ DCD TIM15_IRQHandler ; TIM15
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD I2C2_IRQHandler ; I2C2
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
+ DCD CEC_CAN_IRQHandler ; CEC and CAN
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT VDDIO2_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_CRS_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT TSC_IRQHandler [WEAK]
+ EXPORT DMA1_Ch1_IRQHandler [WEAK]
+ EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
+ EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
+ EXPORT ADC1_COMP_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM6_DAC_IRQHandler [WEAK]
+ EXPORT TIM7_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM15_IRQHandler [WEAK]
+ EXPORT TIM16_IRQHandler [WEAK]
+ EXPORT TIM17_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT I2C2_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT USART3_8_IRQHandler [WEAK]
+ EXPORT CEC_CAN_IRQHandler [WEAK]
+
+
+WWDG_IRQHandler
+VDDIO2_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_CRS_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+TSC_IRQHandler
+DMA1_Ch1_IRQHandler
+DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
+DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
+ADC1_COMP_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM6_DAC_IRQHandler
+TIM7_IRQHandler
+TIM14_IRQHandler
+TIM15_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_8_IRQHandler
+CEC_CAN_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030x6.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030x6.s new file mode 100644 index 0000000..727c24d --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030x6.s @@ -0,0 +1,258 @@ +/**
+ ******************************************************************************
+ * @file startup_stm32f030x6.s
+ * @author MCD Application Team
+ * @brief STM32F030x4/STM32F030x6 devices vector table for GCC toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ ldr r0, =_sdata
+ ldr r1, =_edata
+ ldr r2, =_sidata
+ movs r3, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r4, [r2, r3]
+ str r4, [r0, r3]
+ adds r3, r3, #4
+
+LoopCopyDataInit:
+ adds r4, r0, r3
+ cmp r4, r1
+ bcc CopyDataInit
+
+/* Zero fill the bss segment. */
+ ldr r2, =_sbss
+ ldr r4, =_ebss
+ movs r3, #0
+ b LoopFillZerobss
+
+FillZerobss:
+ str r3, [r2]
+ adds r2, r2, #4
+
+LoopFillZerobss:
+ cmp r2, r4
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word 0 /* Reserved */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_IRQHandler /* RCC */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word 0 /* Reserved */
+ .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
+ .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
+ .word ADC1_IRQHandler /* ADC1 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word 0 /* Reserved */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word 0 /* Reserved */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word 0 /* Reserved */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word 0 /* Reserved */
+ .word USART1_IRQHandler /* USART1 */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_3_IRQHandler
+ .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_5_IRQHandler
+ .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+ .weak ADC1_IRQHandler
+ .thumb_set ADC1_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030x8.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030x8.s new file mode 100644 index 0000000..ff3496e --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030x8.s @@ -0,0 +1,273 @@ +/**
+ ******************************************************************************
+ * @file startup_stm32f030x8.s
+ * @author MCD Application Team
+ * @brief STM32F030x8 devices vector table for GCC toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ ldr r0, =_sdata
+ ldr r1, =_edata
+ ldr r2, =_sidata
+ movs r3, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r4, [r2, r3]
+ str r4, [r0, r3]
+ adds r3, r3, #4
+
+LoopCopyDataInit:
+ adds r4, r0, r3
+ cmp r4, r1
+ bcc CopyDataInit
+
+/* Zero fill the bss segment. */
+ ldr r2, =_sbss
+ ldr r4, =_ebss
+ movs r3, #0
+ b LoopFillZerobss
+
+FillZerobss:
+ str r3, [r2]
+ adds r2, r2, #4
+
+LoopFillZerobss:
+ cmp r2, r4
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word 0 /* Reserved */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_IRQHandler /* RCC */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word 0 /* Reserved */
+ .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
+ .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
+ .word ADC1_IRQHandler /* ADC1 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word 0 /* Reserved */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word TIM6_IRQHandler /* TIM6 */
+ .word 0 /* Reserved */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word TIM15_IRQHandler /* TIM15 */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word I2C2_IRQHandler /* I2C2 */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word SPI2_IRQHandler /* SPI2 */
+ .word USART1_IRQHandler /* USART1 */
+ .word USART2_IRQHandler /* USART2 */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_3_IRQHandler
+ .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_5_IRQHandler
+ .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+ .weak ADC1_IRQHandler
+ .thumb_set ADC1_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM6_IRQHandler
+ .thumb_set TIM6_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM15_IRQHandler
+ .thumb_set TIM15_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak I2C2_IRQHandler
+ .thumb_set I2C2_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030xc.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030xc.s new file mode 100644 index 0000000..43b492d --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030xc.s @@ -0,0 +1,278 @@ +/**
+ ******************************************************************************
+ * @file startup_stm32f030xc.s
+ * @author MCD Application Team
+ * @brief STM32F030xc/STM32F030xb devices vector table for GCC toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ ldr r0, =_sdata
+ ldr r1, =_edata
+ ldr r2, =_sidata
+ movs r3, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r4, [r2, r3]
+ str r4, [r0, r3]
+ adds r3, r3, #4
+
+LoopCopyDataInit:
+ adds r4, r0, r3
+ cmp r4, r1
+ bcc CopyDataInit
+
+/* Zero fill the bss segment. */
+ ldr r2, =_sbss
+ ldr r4, =_ebss
+ movs r3, #0
+ b LoopFillZerobss
+
+FillZerobss:
+ str r3, [r2]
+ adds r2, r2, #4
+
+LoopFillZerobss:
+ cmp r2, r4
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word 0 /* Reserved */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_IRQHandler /* RCC */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word 0 /* Reserved */
+ .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
+ .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
+ .word ADC1_IRQHandler /* ADC1 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word 0 /* Reserved */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word TIM6_IRQHandler /* TIM6 */
+ .word TIM7_IRQHandler /* TIM7 */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word TIM15_IRQHandler /* TIM15 */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word I2C2_IRQHandler /* I2C2 */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word SPI2_IRQHandler /* SPI2 */
+ .word USART1_IRQHandler /* USART1 */
+ .word USART2_IRQHandler /* USART2 */
+ .word USART3_6_IRQHandler /* USART3, USART4, USART5, USART6 */
+ .word 0 /* Reserved */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_3_IRQHandler
+ .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_5_IRQHandler
+ .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+ .weak ADC1_IRQHandler
+ .thumb_set ADC1_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM6_IRQHandler
+ .thumb_set TIM6_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM15_IRQHandler
+ .thumb_set TIM15_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak I2C2_IRQHandler
+ .thumb_set I2C2_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_6_IRQHandler
+ .thumb_set USART3_6_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f031x6.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f031x6.s new file mode 100644 index 0000000..3d990f9 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f031x6.s @@ -0,0 +1,264 @@ +/**
+ ******************************************************************************
+ * @file startup_stm32f031x6.s
+ * @author MCD Application Team
+ * @brief STM32F031x4/STM32F031x6 devices vector table for GCC toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ ldr r0, =_sdata
+ ldr r1, =_edata
+ ldr r2, =_sidata
+ movs r3, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r4, [r2, r3]
+ str r4, [r0, r3]
+ adds r3, r3, #4
+
+LoopCopyDataInit:
+ adds r4, r0, r3
+ cmp r4, r1
+ bcc CopyDataInit
+
+/* Zero fill the bss segment. */
+ ldr r2, =_sbss
+ ldr r4, =_ebss
+ movs r3, #0
+ b LoopFillZerobss
+
+FillZerobss:
+ str r3, [r2]
+ adds r2, r2, #4
+
+LoopFillZerobss:
+ cmp r2, r4
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word PVD_IRQHandler /* PVD through EXTI Line detect */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_IRQHandler /* RCC */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word 0 /* Reserved */
+ .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
+ .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
+ .word ADC1_IRQHandler /* ADC1 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word TIM2_IRQHandler /* TIM2 */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word 0 /* Reserved */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word 0 /* Reserved */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word 0 /* Reserved */
+ .word USART1_IRQHandler /* USART1 */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_IRQHandler
+ .thumb_set PVD_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_3_IRQHandler
+ .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_5_IRQHandler
+ .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+ .weak ADC1_IRQHandler
+ .thumb_set ADC1_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f038xx.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f038xx.s new file mode 100644 index 0000000..5059094 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f038xx.s @@ -0,0 +1,261 @@ +/**
+ ******************************************************************************
+ * @file startup_stm32f038xx.s
+ * @author MCD Application Team
+ * @brief STM32F038xx devices vector table for GCC toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ ldr r0, =_sdata
+ ldr r1, =_edata
+ ldr r2, =_sidata
+ movs r3, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r4, [r2, r3]
+ str r4, [r0, r3]
+ adds r3, r3, #4
+
+LoopCopyDataInit:
+ adds r4, r0, r3
+ cmp r4, r1
+ bcc CopyDataInit
+
+/* Zero fill the bss segment. */
+ ldr r2, =_sbss
+ ldr r4, =_ebss
+ movs r3, #0
+ b LoopFillZerobss
+
+FillZerobss:
+ str r3, [r2]
+ adds r2, r2, #4
+
+LoopFillZerobss:
+ cmp r2, r4
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word 0 /* Reserved */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_IRQHandler /* RCC */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word 0 /* Reserved */
+ .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
+ .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
+ .word ADC1_IRQHandler /* ADC1 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word TIM2_IRQHandler /* TIM2 */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word 0 /* Reserved */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word 0 /* Reserved */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word 0 /* Reserved */
+ .word USART1_IRQHandler /* USART1 */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_3_IRQHandler
+ .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_5_IRQHandler
+ .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+ .weak ADC1_IRQHandler
+ .thumb_set ADC1_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f042x6.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f042x6.s new file mode 100644 index 0000000..2f80631 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f042x6.s @@ -0,0 +1,309 @@ +/**
+ ******************************************************************************
+ * @file startup_stm32f042x6.s
+ * @author MCD Application Team
+ * @brief STM32F042x4/STM32F042x6 devices vector table for GCC toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+/**
+ * @brief This is the code that gets called when the processor first
+ * starts execution following a reset event. Only the absolutely
+ * necessary set is performed, after which the application
+ * supplied main() routine is called.
+ * @param None
+ * @retval : None
+*/
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/*Check if boot space corresponds to test memory*/
+
+ LDR R0,=0x00000004
+ LDR R1, [R0]
+ LSRS R1, R1, #24
+ LDR R2,=0x1F
+ CMP R1, R2
+ BNE ApplicationStart
+
+ /*SYSCFG clock enable*/
+
+ LDR R0,=0x40021018
+ LDR R1,=0x00000001
+ STR R1, [R0]
+
+/*Set CFGR1 register with flash memory remap at address 0*/
+ LDR R0,=0x40010000
+ LDR R1,=0x00000000
+ STR R1, [R0]
+
+ApplicationStart:
+/* Copy the data segment initializers from flash to SRAM */
+ ldr r0, =_sdata
+ ldr r1, =_edata
+ ldr r2, =_sidata
+ movs r3, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r4, [r2, r3]
+ str r4, [r0, r3]
+ adds r3, r3, #4
+
+LoopCopyDataInit:
+ adds r4, r0, r3
+ cmp r4, r1
+ bcc CopyDataInit
+
+/* Zero fill the bss segment. */
+ ldr r2, =_sbss
+ ldr r4, =_ebss
+ movs r3, #0
+ b LoopFillZerobss
+
+FillZerobss:
+ str r3, [r2]
+ adds r2, r2, #4
+
+LoopFillZerobss:
+ cmp r2, r4
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_CRS_IRQHandler /* RCC and CRS */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word TSC_IRQHandler /* TSC */
+ .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
+ .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
+ .word ADC1_IRQHandler /* ADC1 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word TIM2_IRQHandler /* TIM2 */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word 0 /* Reserved */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word 0 /* Reserved */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word SPI2_IRQHandler /* SPI2 */
+ .word USART1_IRQHandler /* USART1 */
+ .word USART2_IRQHandler /* USART2 */
+ .word 0 /* Reserved */
+ .word CEC_CAN_IRQHandler /* CEC and CAN */
+ .word USB_IRQHandler /* USB */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_VDDIO2_IRQHandler
+ .thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_CRS_IRQHandler
+ .thumb_set RCC_CRS_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak TSC_IRQHandler
+ .thumb_set TSC_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_3_IRQHandler
+ .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_5_IRQHandler
+ .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+ .weak ADC1_IRQHandler
+ .thumb_set ADC1_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak CEC_CAN_IRQHandler
+ .thumb_set CEC_CAN_IRQHandler,Default_Handler
+
+ .weak USB_IRQHandler
+ .thumb_set USB_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f048xx.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f048xx.s new file mode 100644 index 0000000..b0c04f1 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f048xx.s @@ -0,0 +1,279 @@ +/**
+ ******************************************************************************
+ * @file startup_stm32f048xx.s
+ * @author MCD Application Team
+ * @brief STM32F048xx devices vector table for GCC toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ ldr r0, =_sdata
+ ldr r1, =_edata
+ ldr r2, =_sidata
+ movs r3, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r4, [r2, r3]
+ str r4, [r0, r3]
+ adds r3, r3, #4
+
+LoopCopyDataInit:
+ adds r4, r0, r3
+ cmp r4, r1
+ bcc CopyDataInit
+
+/* Zero fill the bss segment. */
+ ldr r2, =_sbss
+ ldr r4, =_ebss
+ movs r3, #0
+ b LoopFillZerobss
+
+FillZerobss:
+ str r3, [r2]
+ adds r2, r2, #4
+
+LoopFillZerobss:
+ cmp r2, r4
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word VDDIO2_IRQHandler /* VDDIO2 Monitor through EXTI Line 31 */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_CRS_IRQHandler /* RCC and CRS */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word TSC_IRQHandler /* TSC */
+ .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
+ .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
+ .word ADC1_IRQHandler /* ADC1 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word TIM2_IRQHandler /* TIM2 */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word 0 /* Reserved */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word 0 /* Reserved */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word SPI2_IRQHandler /* SPI2 */
+ .word USART1_IRQHandler /* USART1 */
+ .word USART2_IRQHandler /* USART2 */
+ .word 0 /* Reserved */
+ .word CEC_CAN_IRQHandler /* CEC and CAN */
+ .word USB_IRQHandler /* USB */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak VDDIO2_IRQHandler
+ .thumb_set VDDIO2_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_CRS_IRQHandler
+ .thumb_set RCC_CRS_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak TSC_IRQHandler
+ .thumb_set TSC_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_3_IRQHandler
+ .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_5_IRQHandler
+ .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+ .weak ADC1_IRQHandler
+ .thumb_set ADC1_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak CEC_CAN_IRQHandler
+ .thumb_set CEC_CAN_IRQHandler,Default_Handler
+
+ .weak USB_IRQHandler
+ .thumb_set USB_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f051x8.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f051x8.s new file mode 100644 index 0000000..2df2759 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f051x8.s @@ -0,0 +1,285 @@ +/**
+ ******************************************************************************
+ * @file startup_stm32f051x8.s
+ * @author MCD Application Team
+ * @brief STM32F051x4/STM32F051x6/STM32F051x8 devices vector table for GCC toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ ldr r0, =_sdata
+ ldr r1, =_edata
+ ldr r2, =_sidata
+ movs r3, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r4, [r2, r3]
+ str r4, [r0, r3]
+ adds r3, r3, #4
+
+LoopCopyDataInit:
+ adds r4, r0, r3
+ cmp r4, r1
+ bcc CopyDataInit
+
+/* Zero fill the bss segment. */
+ ldr r2, =_sbss
+ ldr r4, =_ebss
+ movs r3, #0
+ b LoopFillZerobss
+
+FillZerobss:
+ str r3, [r2]
+ adds r2, r2, #4
+
+LoopFillZerobss:
+ cmp r2, r4
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word PVD_IRQHandler /* PVD through EXTI Line detect */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_CRS_IRQHandler /* RCC and CRS */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word TSC_IRQHandler /* TSC */
+ .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
+ .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
+ .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word TIM2_IRQHandler /* TIM2 */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word TIM6_DAC_IRQHandler /* TIM6 and DAC */
+ .word 0 /* Reserved */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word TIM15_IRQHandler /* TIM15 */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word I2C2_IRQHandler /* I2C2 */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word SPI2_IRQHandler /* SPI2 */
+ .word USART1_IRQHandler /* USART1 */
+ .word USART2_IRQHandler /* USART2 */
+ .word 0 /* Reserved */
+ .word CEC_CAN_IRQHandler /* CEC and CAN */
+ .word 0 /* Reserved */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_IRQHandler
+ .thumb_set PVD_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_CRS_IRQHandler
+ .thumb_set RCC_CRS_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak TSC_IRQHandler
+ .thumb_set TSC_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_3_IRQHandler
+ .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_5_IRQHandler
+ .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+ .weak ADC1_COMP_IRQHandler
+ .thumb_set ADC1_COMP_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM6_DAC_IRQHandler
+ .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM15_IRQHandler
+ .thumb_set TIM15_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak I2C2_IRQHandler
+ .thumb_set I2C2_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak CEC_CAN_IRQHandler
+ .thumb_set CEC_CAN_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f058xx.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f058xx.s new file mode 100644 index 0000000..f934e6b --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f058xx.s @@ -0,0 +1,282 @@ +/**
+ ******************************************************************************
+ * @file startup_stm32f058xx.s
+ * @author MCD Application Team
+ * @brief STM32F058xx devices vector table for GCC toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ ldr r0, =_sdata
+ ldr r1, =_edata
+ ldr r2, =_sidata
+ movs r3, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r4, [r2, r3]
+ str r4, [r0, r3]
+ adds r3, r3, #4
+
+LoopCopyDataInit:
+ adds r4, r0, r3
+ cmp r4, r1
+ bcc CopyDataInit
+
+/* Zero fill the bss segment. */
+ ldr r2, =_sbss
+ ldr r4, =_ebss
+ movs r3, #0
+ b LoopFillZerobss
+
+FillZerobss:
+ str r3, [r2]
+ adds r2, r2, #4
+
+LoopFillZerobss:
+ cmp r2, r4
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word 0 /* Reserved */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_CRS_IRQHandler /* RCC and CRS */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word TSC_IRQHandler /* TSC */
+ .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
+ .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
+ .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word TIM2_IRQHandler /* TIM2 */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word TIM6_DAC_IRQHandler /* TIM6 and DAC */
+ .word 0 /* Reserved */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word TIM15_IRQHandler /* TIM15 */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word I2C2_IRQHandler /* I2C2 */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word SPI2_IRQHandler /* SPI2 */
+ .word USART1_IRQHandler /* USART1 */
+ .word USART2_IRQHandler /* USART2 */
+ .word 0 /* Reserved */
+ .word CEC_CAN_IRQHandler /* CEC and CAN */
+ .word 0 /* Reserved */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_CRS_IRQHandler
+ .thumb_set RCC_CRS_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak TSC_IRQHandler
+ .thumb_set TSC_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_3_IRQHandler
+ .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_5_IRQHandler
+ .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+ .weak ADC1_COMP_IRQHandler
+ .thumb_set ADC1_COMP_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM6_DAC_IRQHandler
+ .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM15_IRQHandler
+ .thumb_set TIM15_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak I2C2_IRQHandler
+ .thumb_set I2C2_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak CEC_CAN_IRQHandler
+ .thumb_set CEC_CAN_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f070x6.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f070x6.s new file mode 100644 index 0000000..c9e85bc --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f070x6.s @@ -0,0 +1,294 @@ +/**
+ ******************************************************************************
+ * @file startup_stm32f070x6.s
+ * @author MCD Application Team
+ * @brief STM32F070x4/STM32F070x6 devices vector table for GCC toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+/**
+ * @brief This is the code that gets called when the processor first
+ * starts execution following a reset event. Only the absolutely
+ * necessary set is performed, after which the application
+ * supplied main() routine is called.
+ * @param None
+ * @retval : None
+*/
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/*Check if boot space corresponds to test memory*/
+
+ LDR R0,=0x00000004
+ LDR R1, [R0]
+ LSRS R1, R1, #24
+ LDR R2,=0x1F
+ CMP R1, R2
+ BNE ApplicationStart
+
+ /*SYSCFG clock enable*/
+
+ LDR R0,=0x40021018
+ LDR R1,=0x00000001
+ STR R1, [R0]
+
+/*Set CFGR1 register with flash memory remap at address 0*/
+ LDR R0,=0x40010000
+ LDR R1,=0x00000000
+ STR R1, [R0]
+
+ApplicationStart:
+/* Copy the data segment initializers from flash to SRAM */
+ ldr r0, =_sdata
+ ldr r1, =_edata
+ ldr r2, =_sidata
+ movs r3, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r4, [r2, r3]
+ str r4, [r0, r3]
+ adds r3, r3, #4
+
+LoopCopyDataInit:
+ adds r4, r0, r3
+ cmp r4, r1
+ bcc CopyDataInit
+
+/* Zero fill the bss segment. */
+ ldr r2, =_sbss
+ ldr r4, =_ebss
+ movs r3, #0
+ b LoopFillZerobss
+
+FillZerobss:
+ str r3, [r2]
+ adds r2, r2, #4
+
+LoopFillZerobss:
+ cmp r2, r4
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word 0 /* Reserved */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_IRQHandler /* RCC */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word 0 /* Reserved */
+ .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
+ .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
+ .word ADC1_IRQHandler /* ADC1 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word 0 /* Reserved */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word 0 /* Reserved */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word 0 /* Reserved */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word 0 /* Reserved */
+ .word USART1_IRQHandler /* USART1 */
+ .word USART2_IRQHandler /* USART2 */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word USB_IRQHandler /* USB */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_3_IRQHandler
+ .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_5_IRQHandler
+ .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+ .weak ADC1_IRQHandler
+ .thumb_set ADC1_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USB_IRQHandler
+ .thumb_set USB_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f070xb.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f070xb.s new file mode 100644 index 0000000..c3026e0 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f070xb.s @@ -0,0 +1,282 @@ +/**
+ ******************************************************************************
+ * @file startup_stm32f070xb.s
+ * @author MCD Application Team
+ * @brief STM32F070xb/STM32F070x8 devices vector table for GCC toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ ldr r0, =_sdata
+ ldr r1, =_edata
+ ldr r2, =_sidata
+ movs r3, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r4, [r2, r3]
+ str r4, [r0, r3]
+ adds r3, r3, #4
+
+LoopCopyDataInit:
+ adds r4, r0, r3
+ cmp r4, r1
+ bcc CopyDataInit
+
+/* Zero fill the bss segment. */
+ ldr r2, =_sbss
+ ldr r4, =_ebss
+ movs r3, #0
+ b LoopFillZerobss
+
+FillZerobss:
+ str r3, [r2]
+ adds r2, r2, #4
+
+LoopFillZerobss:
+ cmp r2, r4
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word 0 /* Reserved */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_IRQHandler /* RCC */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word 0 /* Reserved */
+ .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
+ .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
+ .word ADC1_IRQHandler /* ADC1 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word 0 /* Reserved */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word TIM6_IRQHandler /* TIM6 */
+ .word TIM7_IRQHandler /* TIM7 */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word TIM15_IRQHandler /* TIM15 */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word I2C2_IRQHandler /* I2C2 */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word SPI2_IRQHandler /* SPI2 */
+ .word USART1_IRQHandler /* USART1 */
+ .word USART2_IRQHandler /* USART2 */
+ .word USART3_4_IRQHandler /* USART3 and USART4 */
+ .word 0 /* Reserved */
+ .word USB_IRQHandler /* USB */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_3_IRQHandler
+ .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_5_IRQHandler
+ .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+ .weak ADC1_IRQHandler
+ .thumb_set ADC1_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM6_IRQHandler
+ .thumb_set TIM6_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM15_IRQHandler
+ .thumb_set TIM15_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak I2C2_IRQHandler
+ .thumb_set I2C2_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_4_IRQHandler
+ .thumb_set USART3_4_IRQHandler,Default_Handler
+
+ .weak USB_IRQHandler
+ .thumb_set USB_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f071xb.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f071xb.s new file mode 100644 index 0000000..7dcb62d --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f071xb.s @@ -0,0 +1,291 @@ +/**
+ ******************************************************************************
+ * @file startup_stm32f071xb.s
+ * @author MCD Application Team
+ * @brief STM32F071x8/STM32F071xB devices vector table for GCC toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ ldr r0, =_sdata
+ ldr r1, =_edata
+ ldr r2, =_sidata
+ movs r3, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r4, [r2, r3]
+ str r4, [r0, r3]
+ adds r3, r3, #4
+
+LoopCopyDataInit:
+ adds r4, r0, r3
+ cmp r4, r1
+ bcc CopyDataInit
+
+/* Zero fill the bss segment. */
+ ldr r2, =_sbss
+ ldr r4, =_ebss
+ movs r3, #0
+ b LoopFillZerobss
+
+FillZerobss:
+ str r3, [r2]
+ adds r2, r2, #4
+
+LoopFillZerobss:
+ cmp r2, r4
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_CRS_IRQHandler /* RCC and CRS */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word TSC_IRQHandler /* TSC */
+ .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
+ .word DMA1_Channel4_5_6_7_IRQHandler /* DMA1 Channel 4, Channel 5, Channel 6 and Channel 7*/
+ .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word TIM2_IRQHandler /* TIM2 */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word TIM6_DAC_IRQHandler /* TIM6 and DAC */
+ .word TIM7_IRQHandler /* TIM7 */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word TIM15_IRQHandler /* TIM15 */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word I2C2_IRQHandler /* I2C2 */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word SPI2_IRQHandler /* SPI2 */
+ .word USART1_IRQHandler /* USART1 */
+ .word USART2_IRQHandler /* USART2 */
+ .word USART3_4_IRQHandler /* USART3 and USART4 */
+ .word CEC_CAN_IRQHandler /* CEC and CAN */
+ .word 0 /* Reserved */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_VDDIO2_IRQHandler
+ .thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_CRS_IRQHandler
+ .thumb_set RCC_CRS_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak TSC_IRQHandler
+ .thumb_set TSC_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_3_IRQHandler
+ .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_5_6_7_IRQHandler
+ .thumb_set DMA1_Channel4_5_6_7_IRQHandler,Default_Handler
+
+ .weak ADC1_COMP_IRQHandler
+ .thumb_set ADC1_COMP_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM6_DAC_IRQHandler
+ .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM15_IRQHandler
+ .thumb_set TIM15_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak I2C2_IRQHandler
+ .thumb_set I2C2_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_4_IRQHandler
+ .thumb_set USART3_4_IRQHandler,Default_Handler
+
+ .weak CEC_CAN_IRQHandler
+ .thumb_set CEC_CAN_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f072xb.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f072xb.s new file mode 100644 index 0000000..9d431a9 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f072xb.s @@ -0,0 +1,294 @@ +/**
+ ******************************************************************************
+ * @file startup_stm32f072xb.s
+ * @author MCD Application Team
+ * @brief STM32F072x8/STM32F072xB devices vector table for GCC toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ ldr r0, =_sdata
+ ldr r1, =_edata
+ ldr r2, =_sidata
+ movs r3, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r4, [r2, r3]
+ str r4, [r0, r3]
+ adds r3, r3, #4
+
+LoopCopyDataInit:
+ adds r4, r0, r3
+ cmp r4, r1
+ bcc CopyDataInit
+
+/* Zero fill the bss segment. */
+ ldr r2, =_sbss
+ ldr r4, =_ebss
+ movs r3, #0
+ b LoopFillZerobss
+
+FillZerobss:
+ str r3, [r2]
+ adds r2, r2, #4
+
+LoopFillZerobss:
+ cmp r2, r4
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_CRS_IRQHandler /* RCC and CRS */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word TSC_IRQHandler /* TSC */
+ .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
+ .word DMA1_Channel4_5_6_7_IRQHandler /* DMA1 Channel 4, Channel 5, Channel 6 and Channel 7*/
+ .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word TIM2_IRQHandler /* TIM2 */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word TIM6_DAC_IRQHandler /* TIM6 and DAC */
+ .word TIM7_IRQHandler /* TIM7 */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word TIM15_IRQHandler /* TIM15 */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word I2C2_IRQHandler /* I2C2 */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word SPI2_IRQHandler /* SPI2 */
+ .word USART1_IRQHandler /* USART1 */
+ .word USART2_IRQHandler /* USART2 */
+ .word USART3_4_IRQHandler /* USART3 and USART4 */
+ .word CEC_CAN_IRQHandler /* CEC and CAN */
+ .word USB_IRQHandler /* USB */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_VDDIO2_IRQHandler
+ .thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_CRS_IRQHandler
+ .thumb_set RCC_CRS_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak TSC_IRQHandler
+ .thumb_set TSC_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_3_IRQHandler
+ .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_5_6_7_IRQHandler
+ .thumb_set DMA1_Channel4_5_6_7_IRQHandler,Default_Handler
+
+ .weak ADC1_COMP_IRQHandler
+ .thumb_set ADC1_COMP_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM6_DAC_IRQHandler
+ .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM15_IRQHandler
+ .thumb_set TIM15_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak I2C2_IRQHandler
+ .thumb_set I2C2_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_4_IRQHandler
+ .thumb_set USART3_4_IRQHandler,Default_Handler
+
+ .weak CEC_CAN_IRQHandler
+ .thumb_set CEC_CAN_IRQHandler,Default_Handler
+
+ .weak USB_IRQHandler
+ .thumb_set USB_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f078xx.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f078xx.s new file mode 100644 index 0000000..c7b54ba --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f078xx.s @@ -0,0 +1,294 @@ +/**
+ ******************************************************************************
+ * @file startup_stm32f078xx.s
+ * @author MCD Application Team
+ * @brief STM32F078xx devices vector table for GCC toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ ldr r0, =_sdata
+ ldr r1, =_edata
+ ldr r2, =_sidata
+ movs r3, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r4, [r2, r3]
+ str r4, [r0, r3]
+ adds r3, r3, #4
+
+LoopCopyDataInit:
+ adds r4, r0, r3
+ cmp r4, r1
+ bcc CopyDataInit
+
+/* Zero fill the bss segment. */
+ ldr r2, =_sbss
+ ldr r4, =_ebss
+ movs r3, #0
+ b LoopFillZerobss
+
+FillZerobss:
+ str r3, [r2]
+ adds r2, r2, #4
+
+LoopFillZerobss:
+ cmp r2, r4
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word VDDIO2_IRQHandler /* VDDIO2 Monitor through EXTI Line 31 */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_CRS_IRQHandler /* RCC and CRS */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word TSC_IRQHandler /* TSC */
+ .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
+ .word DMA1_Channel4_5_6_7_IRQHandler /* DMA1 Channel 4, Channel 5, Channel 6 and Channel 7*/
+ .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word TIM2_IRQHandler /* TIM2 */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word TIM6_DAC_IRQHandler /* TIM6 and DAC */
+ .word TIM7_IRQHandler /* TIM7 */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word TIM15_IRQHandler /* TIM15 */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word I2C2_IRQHandler /* I2C2 */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word SPI2_IRQHandler /* SPI2 */
+ .word USART1_IRQHandler /* USART1 */
+ .word USART2_IRQHandler /* USART2 */
+ .word USART3_4_IRQHandler /* USART3 and USART4 */
+ .word CEC_CAN_IRQHandler /* CEC and CAN */
+ .word USB_IRQHandler /* USB */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak VDDIO2_IRQHandler
+ .thumb_set VDDIO2_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_CRS_IRQHandler
+ .thumb_set RCC_CRS_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak TSC_IRQHandler
+ .thumb_set TSC_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_3_IRQHandler
+ .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_5_6_7_IRQHandler
+ .thumb_set DMA1_Channel4_5_6_7_IRQHandler,Default_Handler
+
+ .weak ADC1_COMP_IRQHandler
+ .thumb_set ADC1_COMP_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM6_DAC_IRQHandler
+ .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM15_IRQHandler
+ .thumb_set TIM15_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak I2C2_IRQHandler
+ .thumb_set I2C2_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_4_IRQHandler
+ .thumb_set USART3_4_IRQHandler,Default_Handler
+
+ .weak CEC_CAN_IRQHandler
+ .thumb_set CEC_CAN_IRQHandler,Default_Handler
+
+ .weak USB_IRQHandler
+ .thumb_set USB_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f091xc.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f091xc.s new file mode 100644 index 0000000..1e7d642 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f091xc.s @@ -0,0 +1,290 @@ +/**
+ ******************************************************************************
+ * @file startup_stm32f091xc.s
+ * @author MCD Application Team
+ * @brief STM32F091xC devices vector table for GCC toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ ldr r0, =_sdata
+ ldr r1, =_edata
+ ldr r2, =_sidata
+ movs r3, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r4, [r2, r3]
+ str r4, [r0, r3]
+ adds r3, r3, #4
+
+LoopCopyDataInit:
+ adds r4, r0, r3
+ cmp r4, r1
+ bcc CopyDataInit
+
+/* Zero fill the bss segment. */
+ ldr r2, =_sbss
+ ldr r4, =_ebss
+ movs r3, #0
+ b LoopFillZerobss
+
+FillZerobss:
+ str r3, [r2]
+ adds r2, r2, #4
+
+LoopFillZerobss:
+ cmp r2, r4
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_CRS_IRQHandler /* RCC and CRS */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word TSC_IRQHandler /* TSC */
+ .word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
+ .word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
+ .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word TIM2_IRQHandler /* TIM2 */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word TIM6_DAC_IRQHandler /* TIM6 and DAC */
+ .word TIM7_IRQHandler /* TIM7 */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word TIM15_IRQHandler /* TIM15 */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word I2C2_IRQHandler /* I2C2 */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word SPI2_IRQHandler /* SPI2 */
+ .word USART1_IRQHandler /* USART1 */
+ .word USART2_IRQHandler /* USART2 */
+ .word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
+ .word CEC_CAN_IRQHandler /* CEC and CAN */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_VDDIO2_IRQHandler
+ .thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_CRS_IRQHandler
+ .thumb_set RCC_CRS_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak TSC_IRQHandler
+ .thumb_set TSC_IRQHandler,Default_Handler
+
+ .weak DMA1_Ch1_IRQHandler
+ .thumb_set DMA1_Ch1_IRQHandler,Default_Handler
+
+ .weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
+ .thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
+
+ .weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
+ .thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
+
+ .weak ADC1_COMP_IRQHandler
+ .thumb_set ADC1_COMP_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM6_DAC_IRQHandler
+ .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM15_IRQHandler
+ .thumb_set TIM15_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak I2C2_IRQHandler
+ .thumb_set I2C2_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_8_IRQHandler
+ .thumb_set USART3_8_IRQHandler,Default_Handler
+
+ .weak CEC_CAN_IRQHandler
+ .thumb_set CEC_CAN_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f098xx.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f098xx.s new file mode 100644 index 0000000..5826c2f --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f098xx.s @@ -0,0 +1,290 @@ +/**
+ ******************************************************************************
+ * @file startup_stm32f098xx.s
+ * @author MCD Application Team
+ * @brief STM32F098xx devices vector table for GCC toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ ldr r0, =_sdata
+ ldr r1, =_edata
+ ldr r2, =_sidata
+ movs r3, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r4, [r2, r3]
+ str r4, [r0, r3]
+ adds r3, r3, #4
+
+LoopCopyDataInit:
+ adds r4, r0, r3
+ cmp r4, r1
+ bcc CopyDataInit
+
+/* Zero fill the bss segment. */
+ ldr r2, =_sbss
+ ldr r4, =_ebss
+ movs r3, #0
+ b LoopFillZerobss
+
+FillZerobss:
+ str r3, [r2]
+ adds r2, r2, #4
+
+LoopFillZerobss:
+ cmp r2, r4
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word VDDIO2_IRQHandler /* VDDIO2 Monitor through EXTI Line 31 */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_CRS_IRQHandler /* RCC and CRS */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word TSC_IRQHandler /* TSC */
+ .word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
+ .word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
+ .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word TIM2_IRQHandler /* TIM2 */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word TIM6_DAC_IRQHandler /* TIM6 and DAC */
+ .word TIM7_IRQHandler /* TIM7 */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word TIM15_IRQHandler /* TIM15 */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word I2C2_IRQHandler /* I2C2 */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word SPI2_IRQHandler /* SPI2 */
+ .word USART1_IRQHandler /* USART1 */
+ .word USART2_IRQHandler /* USART2 */
+ .word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
+ .word CEC_CAN_IRQHandler /* CEC and CAN */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak VDDIO2_IRQHandler
+ .thumb_set VDDIO2_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_CRS_IRQHandler
+ .thumb_set RCC_CRS_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak TSC_IRQHandler
+ .thumb_set TSC_IRQHandler,Default_Handler
+
+ .weak DMA1_Ch1_IRQHandler
+ .thumb_set DMA1_Ch1_IRQHandler,Default_Handler
+
+ .weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
+ .thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
+
+ .weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
+ .thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
+
+ .weak ADC1_COMP_IRQHandler
+ .thumb_set ADC1_COMP_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM6_DAC_IRQHandler
+ .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM15_IRQHandler
+ .thumb_set TIM15_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak I2C2_IRQHandler
+ .thumb_set I2C2_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_8_IRQHandler
+ .thumb_set USART3_8_IRQHandler,Default_Handler
+
+ .weak CEC_CAN_IRQHandler
+ .thumb_set CEC_CAN_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f030x6_flash.icf b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f030x6_flash.icf new file mode 100644 index 0000000..4df4564 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f030x6_flash.icf @@ -0,0 +1,33 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x08007FFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x20000FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__ = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
+
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f030x8_flash.icf b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f030x8_flash.icf new file mode 100644 index 0000000..d8897f2 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f030x8_flash.icf @@ -0,0 +1,33 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x0800FFFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x20001FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__ = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
+
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f030xc_flash.icf b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f030xc_flash.icf new file mode 100644 index 0000000..e513274 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f030xc_flash.icf @@ -0,0 +1,33 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x0803FFFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x20007FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__ = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
+
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f031x6_flash.icf b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f031x6_flash.icf new file mode 100644 index 0000000..4df4564 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f031x6_flash.icf @@ -0,0 +1,33 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x08007FFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x20000FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__ = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
+
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f038xx_flash.icf b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f038xx_flash.icf new file mode 100644 index 0000000..4df4564 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f038xx_flash.icf @@ -0,0 +1,33 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x08007FFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x20000FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__ = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
+
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f042x6_flash.icf b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f042x6_flash.icf new file mode 100644 index 0000000..25f0bac --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f042x6_flash.icf @@ -0,0 +1,33 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x08007FFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x200017FF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__ = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
+
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f048xx_flash.icf b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f048xx_flash.icf new file mode 100644 index 0000000..25f0bac --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f048xx_flash.icf @@ -0,0 +1,33 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x08007FFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x200017FF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__ = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
+
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f051x8_flash.icf b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f051x8_flash.icf new file mode 100644 index 0000000..d8897f2 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f051x8_flash.icf @@ -0,0 +1,33 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x0800FFFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x20001FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__ = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
+
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f058xx_flash.icf b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f058xx_flash.icf new file mode 100644 index 0000000..d8897f2 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f058xx_flash.icf @@ -0,0 +1,33 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x0800FFFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x20001FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__ = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
+
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f070x6_flash.icf b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f070x6_flash.icf new file mode 100644 index 0000000..25f0bac --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f070x6_flash.icf @@ -0,0 +1,33 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x08007FFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x200017FF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__ = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
+
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f070xb_flash.icf b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f070xb_flash.icf new file mode 100644 index 0000000..7ee89ac --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f070xb_flash.icf @@ -0,0 +1,33 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x0801FFFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x20003FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__ = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
+
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f071xb_flash.icf b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f071xb_flash.icf new file mode 100644 index 0000000..7ee89ac --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f071xb_flash.icf @@ -0,0 +1,33 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x0801FFFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x20003FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__ = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
+
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f072xb_flash.icf b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f072xb_flash.icf new file mode 100644 index 0000000..7ee89ac --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f072xb_flash.icf @@ -0,0 +1,33 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x0801FFFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x20003FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__ = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
+
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f078xx_flash.icf b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f078xx_flash.icf new file mode 100644 index 0000000..7ee89ac --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f078xx_flash.icf @@ -0,0 +1,33 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x0801FFFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x20003FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__ = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
+
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f091xc_flash.icf b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f091xc_flash.icf new file mode 100644 index 0000000..e513274 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f091xc_flash.icf @@ -0,0 +1,33 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x0803FFFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x20007FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__ = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
+
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f091xc_sram.icf b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f091xc_sram.icf new file mode 100644 index 0000000..d0ba727 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f091xc_sram.icf @@ -0,0 +1,31 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x20000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x20000000 ;
+define symbol __ICFEDIT_region_ROM_end__ = 0x20003FFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20004000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x20007FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__ = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
\ No newline at end of file diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f098xx_flash.icf b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f098xx_flash.icf new file mode 100644 index 0000000..e513274 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f098xx_flash.icf @@ -0,0 +1,33 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x0803FFFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x20007FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__ = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
+
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f098xx_sram.icf b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f098xx_sram.icf new file mode 100644 index 0000000..d0ba727 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/linker/stm32f098xx_sram.icf @@ -0,0 +1,31 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x20000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x20000000 ;
+define symbol __ICFEDIT_region_ROM_end__ = 0x20003FFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20004000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x20007FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__ = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
\ No newline at end of file diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f030x6.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f030x6.s new file mode 100644 index 0000000..3263b01 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f030x6.s @@ -0,0 +1,245 @@ +;*******************************************************************************
+;* File Name : startup_stm32f030x6.s
+;* Author : MCD Application Team
+;* Description : STM32F030x4/STM32F030x6 devices vector table for EWARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == __iar_program_start,
+;* - Set the vector table entries with the exceptions ISR
+;* address,
+;* - Branches to main in the C library (which eventually
+;* calls main()).
+;* After Reset the Cortex-M0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* @attention
+;*
+;* <h2><center>© Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+ MODULE ?cstartup
+
+ ;; Forward declaration of sections.
+ SECTION CSTACK:DATA:NOROOT(3)
+
+ SECTION .intvec:CODE:NOROOT(2)
+
+ EXTERN __iar_program_start
+ EXTERN SystemInit
+ PUBLIC __vector_table
+
+ DATA
+__vector_table
+ DCD sfe(CSTACK)
+ DCD Reset_Handler ; Reset Handler
+
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD 0 ; Reserved
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD 0 ; Reserved
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_IRQHandler ; ADC1
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD 0 ; Reserved
+ DCD TIM3_IRQHandler ; TIM3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM14_IRQHandler ; TIM14
+ DCD 0 ; Reserved
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD 0 ; Reserved
+ DCD SPI1_IRQHandler ; SPI1
+ DCD 0 ; Reserved
+ DCD USART1_IRQHandler ; USART1
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+ THUMB
+
+ PUBWEAK Reset_Handler
+ SECTION .text:CODE:NOROOT:REORDER(2)
+Reset_Handler
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__iar_program_start
+ BX R0
+
+ PUBWEAK NMI_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+NMI_Handler
+ B NMI_Handler
+
+ PUBWEAK HardFault_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+HardFault_Handler
+ B HardFault_Handler
+
+ PUBWEAK SVC_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SVC_Handler
+ B SVC_Handler
+
+ PUBWEAK PendSV_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+PendSV_Handler
+ B PendSV_Handler
+
+ PUBWEAK SysTick_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SysTick_Handler
+ B SysTick_Handler
+
+ PUBWEAK WWDG_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+WWDG_IRQHandler
+ B WWDG_IRQHandler
+
+ PUBWEAK RTC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RTC_IRQHandler
+ B RTC_IRQHandler
+
+ PUBWEAK FLASH_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+FLASH_IRQHandler
+ B FLASH_IRQHandler
+
+ PUBWEAK RCC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RCC_IRQHandler
+ B RCC_IRQHandler
+
+ PUBWEAK EXTI0_1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI0_1_IRQHandler
+ B EXTI0_1_IRQHandler
+
+ PUBWEAK EXTI2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI2_3_IRQHandler
+ B EXTI2_3_IRQHandler
+
+ PUBWEAK EXTI4_15_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI4_15_IRQHandler
+ B EXTI4_15_IRQHandler
+
+ PUBWEAK DMA1_Channel1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel1_IRQHandler
+ B DMA1_Channel1_IRQHandler
+
+ PUBWEAK DMA1_Channel2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel2_3_IRQHandler
+ B DMA1_Channel2_3_IRQHandler
+
+ PUBWEAK DMA1_Channel4_5_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel4_5_IRQHandler
+ B DMA1_Channel4_5_IRQHandler
+
+ PUBWEAK ADC1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+ADC1_IRQHandler
+ B ADC1_IRQHandler
+
+ PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_BRK_UP_TRG_COM_IRQHandler
+ B TIM1_BRK_UP_TRG_COM_IRQHandler
+
+ PUBWEAK TIM1_CC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_CC_IRQHandler
+ B TIM1_CC_IRQHandler
+
+ PUBWEAK TIM3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM3_IRQHandler
+ B TIM3_IRQHandler
+
+ PUBWEAK TIM14_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM14_IRQHandler
+ B TIM14_IRQHandler
+
+ PUBWEAK TIM16_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM16_IRQHandler
+ B TIM16_IRQHandler
+
+ PUBWEAK TIM17_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM17_IRQHandler
+ B TIM17_IRQHandler
+
+ PUBWEAK I2C1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C1_IRQHandler
+ B I2C1_IRQHandler
+
+ PUBWEAK SPI1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI1_IRQHandler
+ B SPI1_IRQHandler
+
+ PUBWEAK USART1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART1_IRQHandler
+ B USART1_IRQHandler
+
+
+ END
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f030x8.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f030x8.s new file mode 100644 index 0000000..adcaacb --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f030x8.s @@ -0,0 +1,274 @@ +;*******************************************************************************
+;* File Name : startup_stm32f030x8.s
+;* Author : MCD Application Team
+;* Description : STM32F030x8 devices vector table for EWARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == __iar_program_start,
+;* - Set the vector table entries with the exceptions ISR
+;* address,
+;* - Branches to main in the C library (which eventually
+;* calls main()).
+;* After Reset the Cortex-M0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* @attention
+;*
+;* <h2><center>© Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+ MODULE ?cstartup
+
+ ;; Forward declaration of sections.
+ SECTION CSTACK:DATA:NOROOT(3)
+
+ SECTION .intvec:CODE:NOROOT(2)
+
+ EXTERN __iar_program_start
+ EXTERN SystemInit
+ PUBLIC __vector_table
+
+ DATA
+__vector_table
+ DCD sfe(CSTACK)
+ DCD Reset_Handler ; Reset Handler
+
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD 0 ; Reserved
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD 0 ; Reserved
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_IRQHandler ; ADC1
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD 0 ; Reserved
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM6_IRQHandler ; TIM6
+ DCD 0 ; Reserved
+ DCD TIM14_IRQHandler ; TIM14
+ DCD TIM15_IRQHandler ; TIM15
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD I2C2_IRQHandler ; I2C2
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+
+
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+ THUMB
+
+ PUBWEAK Reset_Handler
+ SECTION .text:CODE:NOROOT:REORDER(2)
+Reset_Handler
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__iar_program_start
+ BX R0
+
+ PUBWEAK NMI_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+NMI_Handler
+ B NMI_Handler
+
+ PUBWEAK HardFault_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+HardFault_Handler
+ B HardFault_Handler
+
+ PUBWEAK SVC_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SVC_Handler
+ B SVC_Handler
+
+ PUBWEAK PendSV_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+PendSV_Handler
+ B PendSV_Handler
+
+ PUBWEAK SysTick_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SysTick_Handler
+ B SysTick_Handler
+
+ PUBWEAK WWDG_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+WWDG_IRQHandler
+ B WWDG_IRQHandler
+
+ PUBWEAK RTC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RTC_IRQHandler
+ B RTC_IRQHandler
+
+ PUBWEAK FLASH_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+FLASH_IRQHandler
+ B FLASH_IRQHandler
+
+ PUBWEAK RCC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RCC_IRQHandler
+ B RCC_IRQHandler
+
+ PUBWEAK EXTI0_1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI0_1_IRQHandler
+ B EXTI0_1_IRQHandler
+
+ PUBWEAK EXTI2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI2_3_IRQHandler
+ B EXTI2_3_IRQHandler
+
+ PUBWEAK EXTI4_15_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI4_15_IRQHandler
+ B EXTI4_15_IRQHandler
+
+ PUBWEAK DMA1_Channel1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel1_IRQHandler
+ B DMA1_Channel1_IRQHandler
+
+ PUBWEAK DMA1_Channel2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel2_3_IRQHandler
+ B DMA1_Channel2_3_IRQHandler
+
+ PUBWEAK DMA1_Channel4_5_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel4_5_IRQHandler
+ B DMA1_Channel4_5_IRQHandler
+
+ PUBWEAK ADC1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+ADC1_IRQHandler
+ B ADC1_IRQHandler
+
+ PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_BRK_UP_TRG_COM_IRQHandler
+ B TIM1_BRK_UP_TRG_COM_IRQHandler
+
+ PUBWEAK TIM1_CC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_CC_IRQHandler
+ B TIM1_CC_IRQHandler
+
+ PUBWEAK TIM3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM3_IRQHandler
+ B TIM3_IRQHandler
+
+ PUBWEAK TIM6_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM6_IRQHandler
+ B TIM6_IRQHandler
+
+ PUBWEAK TIM14_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM14_IRQHandler
+ B TIM14_IRQHandler
+
+ PUBWEAK TIM15_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM15_IRQHandler
+ B TIM15_IRQHandler
+
+ PUBWEAK TIM16_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM16_IRQHandler
+ B TIM16_IRQHandler
+
+ PUBWEAK TIM17_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM17_IRQHandler
+ B TIM17_IRQHandler
+
+ PUBWEAK I2C1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C1_IRQHandler
+ B I2C1_IRQHandler
+
+ PUBWEAK I2C2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C2_IRQHandler
+ B I2C2_IRQHandler
+
+ PUBWEAK SPI1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI1_IRQHandler
+ B SPI1_IRQHandler
+
+ PUBWEAK SPI2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI2_IRQHandler
+ B SPI2_IRQHandler
+
+ PUBWEAK USART1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART1_IRQHandler
+ B USART1_IRQHandler
+
+ PUBWEAK USART2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART2_IRQHandler
+ B USART2_IRQHandler
+
+
+
+ END
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f030xc.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f030xc.s new file mode 100644 index 0000000..58647e2 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f030xc.s @@ -0,0 +1,283 @@ +;*******************************************************************************
+;* File Name : startup_stm32f030xc.s
+;* Author : MCD Application Team
+;* Description : STM32F030xc devices vector table for EWARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == __iar_program_start,
+;* - Set the vector table entries with the exceptions ISR
+;* address,
+;* - Branches to main in the C library (which eventually
+;* calls main()).
+;* After Reset the Cortex-M0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* @attention
+;*
+;* <h2><center>© Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+ MODULE ?cstartup
+
+ ;; Forward declaration of sections.
+ SECTION CSTACK:DATA:NOROOT(3)
+
+ SECTION .intvec:CODE:NOROOT(2)
+
+ EXTERN __iar_program_start
+ EXTERN SystemInit
+ PUBLIC __vector_table
+
+ DATA
+__vector_table
+ DCD sfe(CSTACK)
+ DCD Reset_Handler ; Reset Handler
+
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD 0 ; Reserved
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD 0 ; Reserved
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_IRQHandler ; ADC1
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD 0 ; Reserved
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM6_IRQHandler ; TIM6
+ DCD TIM7_IRQHandler ; TIM7
+ DCD TIM14_IRQHandler ; TIM14
+ DCD TIM15_IRQHandler ; TIM15
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD I2C2_IRQHandler ; I2C2
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_6_IRQHandler ; USART3, USART4, USART5, USART6
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+ THUMB
+
+ PUBWEAK Reset_Handler
+ SECTION .text:CODE:NOROOT:REORDER(2)
+Reset_Handler
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__iar_program_start
+ BX R0
+
+ PUBWEAK NMI_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+NMI_Handler
+ B NMI_Handler
+
+ PUBWEAK HardFault_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+HardFault_Handler
+ B HardFault_Handler
+
+ PUBWEAK SVC_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SVC_Handler
+ B SVC_Handler
+
+ PUBWEAK PendSV_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+PendSV_Handler
+ B PendSV_Handler
+
+ PUBWEAK SysTick_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SysTick_Handler
+ B SysTick_Handler
+
+ PUBWEAK WWDG_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+WWDG_IRQHandler
+ B WWDG_IRQHandler
+
+ PUBWEAK RTC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RTC_IRQHandler
+ B RTC_IRQHandler
+
+ PUBWEAK FLASH_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+FLASH_IRQHandler
+ B FLASH_IRQHandler
+
+ PUBWEAK RCC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RCC_IRQHandler
+ B RCC_IRQHandler
+
+ PUBWEAK EXTI0_1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI0_1_IRQHandler
+ B EXTI0_1_IRQHandler
+
+ PUBWEAK EXTI2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI2_3_IRQHandler
+ B EXTI2_3_IRQHandler
+
+ PUBWEAK EXTI4_15_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI4_15_IRQHandler
+ B EXTI4_15_IRQHandler
+
+ PUBWEAK DMA1_Channel1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel1_IRQHandler
+ B DMA1_Channel1_IRQHandler
+
+ PUBWEAK DMA1_Channel2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel2_3_IRQHandler
+ B DMA1_Channel2_3_IRQHandler
+
+ PUBWEAK DMA1_Channel4_5_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel4_5_IRQHandler
+ B DMA1_Channel4_5_IRQHandler
+
+ PUBWEAK ADC1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+ADC1_IRQHandler
+ B ADC1_IRQHandler
+
+ PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_BRK_UP_TRG_COM_IRQHandler
+ B TIM1_BRK_UP_TRG_COM_IRQHandler
+
+ PUBWEAK TIM1_CC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_CC_IRQHandler
+ B TIM1_CC_IRQHandler
+
+ PUBWEAK TIM3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM3_IRQHandler
+ B TIM3_IRQHandler
+
+ PUBWEAK TIM6_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM6_IRQHandler
+ B TIM6_IRQHandler
+
+ PUBWEAK TIM7_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM7_IRQHandler
+ B TIM7_IRQHandler
+
+ PUBWEAK TIM14_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM14_IRQHandler
+ B TIM14_IRQHandler
+
+ PUBWEAK TIM15_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM15_IRQHandler
+ B TIM15_IRQHandler
+
+ PUBWEAK TIM16_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM16_IRQHandler
+ B TIM16_IRQHandler
+
+ PUBWEAK TIM17_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM17_IRQHandler
+ B TIM17_IRQHandler
+
+ PUBWEAK I2C1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C1_IRQHandler
+ B I2C1_IRQHandler
+
+ PUBWEAK I2C2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C2_IRQHandler
+ B I2C2_IRQHandler
+
+ PUBWEAK SPI1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI1_IRQHandler
+ B SPI1_IRQHandler
+
+ PUBWEAK SPI2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI2_IRQHandler
+ B SPI2_IRQHandler
+
+ PUBWEAK USART1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART1_IRQHandler
+ B USART1_IRQHandler
+
+ PUBWEAK USART2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART2_IRQHandler
+ B USART2_IRQHandler
+
+ PUBWEAK USART3_6_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART3_6_IRQHandler
+ B USART3_6_IRQHandler
+
+ END
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f031x6.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f031x6.s new file mode 100644 index 0000000..e8eee70 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f031x6.s @@ -0,0 +1,255 @@ +;*******************************************************************************
+;* File Name : startup_stm32f031x6.s
+;* Author : MCD Application Team
+;* Description : STM32F031x4/STM32F031x6 devices vector table for EWARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == __iar_program_start,
+;* - Set the vector table entries with the exceptions ISR
+;* address,
+;* - Branches to main in the C library (which eventually
+;* calls main()).
+;* After Reset the Cortex-M0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* @attention
+;*
+;* <h2><center>© Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+ MODULE ?cstartup
+
+ ;; Forward declaration of sections.
+ SECTION CSTACK:DATA:NOROOT(3)
+
+ SECTION .intvec:CODE:NOROOT(2)
+
+ EXTERN __iar_program_start
+ EXTERN SystemInit
+ PUBLIC __vector_table
+
+ DATA
+__vector_table
+ DCD sfe(CSTACK)
+ DCD Reset_Handler ; Reset Handler
+
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detect
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD 0 ; Reserved
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_IRQHandler ; ADC1
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM14_IRQHandler ; TIM14
+ DCD 0 ; Reserved
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD 0 ; Reserved
+ DCD SPI1_IRQHandler ; SPI1
+ DCD 0 ; Reserved
+ DCD USART1_IRQHandler ; USART1
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+ THUMB
+
+ PUBWEAK Reset_Handler
+ SECTION .text:CODE:NOROOT:REORDER(2)
+Reset_Handler
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__iar_program_start
+ BX R0
+
+ PUBWEAK NMI_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+NMI_Handler
+ B NMI_Handler
+
+ PUBWEAK HardFault_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+HardFault_Handler
+ B HardFault_Handler
+
+ PUBWEAK SVC_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SVC_Handler
+ B SVC_Handler
+
+ PUBWEAK PendSV_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+PendSV_Handler
+ B PendSV_Handler
+
+ PUBWEAK SysTick_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SysTick_Handler
+ B SysTick_Handler
+
+ PUBWEAK WWDG_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+WWDG_IRQHandler
+ B WWDG_IRQHandler
+
+ PUBWEAK PVD_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+PVD_IRQHandler
+ B PVD_IRQHandler
+
+ PUBWEAK RTC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RTC_IRQHandler
+ B RTC_IRQHandler
+
+ PUBWEAK FLASH_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+FLASH_IRQHandler
+ B FLASH_IRQHandler
+
+ PUBWEAK RCC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RCC_IRQHandler
+ B RCC_IRQHandler
+
+ PUBWEAK EXTI0_1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI0_1_IRQHandler
+ B EXTI0_1_IRQHandler
+
+ PUBWEAK EXTI2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI2_3_IRQHandler
+ B EXTI2_3_IRQHandler
+
+ PUBWEAK EXTI4_15_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI4_15_IRQHandler
+ B EXTI4_15_IRQHandler
+
+ PUBWEAK DMA1_Channel1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel1_IRQHandler
+ B DMA1_Channel1_IRQHandler
+
+ PUBWEAK DMA1_Channel2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel2_3_IRQHandler
+ B DMA1_Channel2_3_IRQHandler
+
+ PUBWEAK DMA1_Channel4_5_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel4_5_IRQHandler
+ B DMA1_Channel4_5_IRQHandler
+
+ PUBWEAK ADC1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+ADC1_IRQHandler
+ B ADC1_IRQHandler
+
+ PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_BRK_UP_TRG_COM_IRQHandler
+ B TIM1_BRK_UP_TRG_COM_IRQHandler
+
+ PUBWEAK TIM1_CC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_CC_IRQHandler
+ B TIM1_CC_IRQHandler
+
+ PUBWEAK TIM2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM2_IRQHandler
+ B TIM2_IRQHandler
+
+ PUBWEAK TIM3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM3_IRQHandler
+ B TIM3_IRQHandler
+
+ PUBWEAK TIM14_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM14_IRQHandler
+ B TIM14_IRQHandler
+
+ PUBWEAK TIM16_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM16_IRQHandler
+ B TIM16_IRQHandler
+
+ PUBWEAK TIM17_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM17_IRQHandler
+ B TIM17_IRQHandler
+
+ PUBWEAK I2C1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C1_IRQHandler
+ B I2C1_IRQHandler
+
+ PUBWEAK SPI1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI1_IRQHandler
+ B SPI1_IRQHandler
+
+ PUBWEAK USART1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART1_IRQHandler
+ B USART1_IRQHandler
+
+
+ END
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f038xx.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f038xx.s new file mode 100644 index 0000000..c51bde8 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f038xx.s @@ -0,0 +1,250 @@ +;*******************************************************************************
+;* File Name : startup_stm32f038xx.s
+;* Author : MCD Application Team
+;* Description : STM32F038xx devices vector table for EWARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == __iar_program_start,
+;* - Set the vector table entries with the exceptions ISR
+;* address,
+;* - Branches to main in the C library (which eventually
+;* calls main()).
+;* After Reset the Cortex-M0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* @attention
+;*
+;* <h2><center>© Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+ MODULE ?cstartup
+
+ ;; Forward declaration of sections.
+ SECTION CSTACK:DATA:NOROOT(3)
+
+ SECTION .intvec:CODE:NOROOT(2)
+
+ EXTERN __iar_program_start
+ EXTERN SystemInit
+ PUBLIC __vector_table
+
+ DATA
+__vector_table
+ DCD sfe(CSTACK)
+ DCD Reset_Handler ; Reset Handler
+
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD 0 ; Reserved
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD 0 ; Reserved
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_IRQHandler ; ADC1
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM14_IRQHandler ; TIM14
+ DCD 0 ; Reserved
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD 0 ; Reserved
+ DCD SPI1_IRQHandler ; SPI1
+ DCD 0 ; Reserved
+ DCD USART1_IRQHandler ; USART1
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+ THUMB
+
+ PUBWEAK Reset_Handler
+ SECTION .text:CODE:NOROOT:REORDER(2)
+Reset_Handler
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__iar_program_start
+ BX R0
+
+ PUBWEAK NMI_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+NMI_Handler
+ B NMI_Handler
+
+ PUBWEAK HardFault_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+HardFault_Handler
+ B HardFault_Handler
+
+ PUBWEAK SVC_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SVC_Handler
+ B SVC_Handler
+
+ PUBWEAK PendSV_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+PendSV_Handler
+ B PendSV_Handler
+
+ PUBWEAK SysTick_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SysTick_Handler
+ B SysTick_Handler
+
+ PUBWEAK WWDG_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+WWDG_IRQHandler
+ B WWDG_IRQHandler
+
+ PUBWEAK RTC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RTC_IRQHandler
+ B RTC_IRQHandler
+
+ PUBWEAK FLASH_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+FLASH_IRQHandler
+ B FLASH_IRQHandler
+
+ PUBWEAK RCC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RCC_IRQHandler
+ B RCC_IRQHandler
+
+ PUBWEAK EXTI0_1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI0_1_IRQHandler
+ B EXTI0_1_IRQHandler
+
+ PUBWEAK EXTI2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI2_3_IRQHandler
+ B EXTI2_3_IRQHandler
+
+ PUBWEAK EXTI4_15_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI4_15_IRQHandler
+ B EXTI4_15_IRQHandler
+
+ PUBWEAK DMA1_Channel1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel1_IRQHandler
+ B DMA1_Channel1_IRQHandler
+
+ PUBWEAK DMA1_Channel2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel2_3_IRQHandler
+ B DMA1_Channel2_3_IRQHandler
+
+ PUBWEAK DMA1_Channel4_5_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel4_5_IRQHandler
+ B DMA1_Channel4_5_IRQHandler
+
+ PUBWEAK ADC1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+ADC1_IRQHandler
+ B ADC1_IRQHandler
+
+ PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_BRK_UP_TRG_COM_IRQHandler
+ B TIM1_BRK_UP_TRG_COM_IRQHandler
+
+ PUBWEAK TIM1_CC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_CC_IRQHandler
+ B TIM1_CC_IRQHandler
+
+ PUBWEAK TIM2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM2_IRQHandler
+ B TIM2_IRQHandler
+
+ PUBWEAK TIM3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM3_IRQHandler
+ B TIM3_IRQHandler
+
+ PUBWEAK TIM14_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM14_IRQHandler
+ B TIM14_IRQHandler
+
+ PUBWEAK TIM16_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM16_IRQHandler
+ B TIM16_IRQHandler
+
+ PUBWEAK TIM17_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM17_IRQHandler
+ B TIM17_IRQHandler
+
+ PUBWEAK I2C1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C1_IRQHandler
+ B I2C1_IRQHandler
+
+ PUBWEAK SPI1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI1_IRQHandler
+ B SPI1_IRQHandler
+
+ PUBWEAK USART1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART1_IRQHandler
+ B USART1_IRQHandler
+
+
+ END
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f042x6.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f042x6.s new file mode 100644 index 0000000..1a0097d --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f042x6.s @@ -0,0 +1,306 @@ +;*******************************************************************************
+;* File Name : startup_stm32f042x6.s
+;* Author : MCD Application Team
+;* Description : STM32F042x4/STM32F042x6 devices vector table for EWARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == __iar_program_start,
+;* - Set the vector table entries with the exceptions ISR
+;* address,
+;* - Branches to main in the C library (which eventually
+;* calls main()).
+;* After Reset the Cortex-M0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* @attention
+;*
+;* <h2><center>© Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+ MODULE ?cstartup
+
+ ;; Forward declaration of sections.
+ SECTION CSTACK:DATA:NOROOT(3)
+
+ SECTION .intvec:CODE:NOROOT(2)
+
+ EXTERN __iar_program_start
+ EXTERN SystemInit
+ PUBLIC __vector_table
+
+ DATA
+__vector_table
+ DCD sfe(CSTACK)
+ DCD Reset_Handler ; Reset Handler
+
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_CRS_IRQHandler ; RCC and CRS
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD TSC_IRQHandler ; TSC
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_IRQHandler ; ADC1
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM14_IRQHandler ; TIM14
+ DCD 0 ; Reserved
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD 0 ; Reserved
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD 0 ; Reserved
+ DCD CEC_CAN_IRQHandler ; CEC and CAN
+ DCD USB_IRQHandler ; USB
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+ THUMB
+
+ PUBWEAK Reset_Handler
+ SECTION .text:CODE:NOROOT:REORDER(2)
+Reset_Handler
+
+ LDR R0, =sfe(CSTACK) ; set stack pointer
+ MSR MSP, R0
+
+;;Check if boot space corresponds to test memory
+ LDR R0,=0x00000004
+ LDR R1, [R0]
+ LSRS R1, R1, #24
+ LDR R2,=0x1F
+ CMP R1, R2
+
+ BNE ApplicationStart
+;; SYSCFG clock enable
+ LDR R0,=0x40021018
+ LDR R1,=0x00000001
+ STR R1, [R0]
+
+;; Set CFGR1 register with flash memory remap at address 0
+
+ LDR R0,=0x40010000
+ LDR R1,=0x00000000
+ STR R1, [R0]
+ApplicationStart
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__iar_program_start
+ BX R0
+
+ PUBWEAK NMI_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+NMI_Handler
+ B NMI_Handler
+
+ PUBWEAK HardFault_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+HardFault_Handler
+ B HardFault_Handler
+
+ PUBWEAK SVC_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SVC_Handler
+ B SVC_Handler
+
+ PUBWEAK PendSV_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+PendSV_Handler
+ B PendSV_Handler
+
+ PUBWEAK SysTick_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SysTick_Handler
+ B SysTick_Handler
+
+ PUBWEAK WWDG_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+WWDG_IRQHandler
+ B WWDG_IRQHandler
+
+ PUBWEAK PVD_VDDIO2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+PVD_VDDIO2_IRQHandler
+ B PVD_VDDIO2_IRQHandler
+
+ PUBWEAK RTC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RTC_IRQHandler
+ B RTC_IRQHandler
+
+ PUBWEAK FLASH_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+FLASH_IRQHandler
+ B FLASH_IRQHandler
+
+ PUBWEAK RCC_CRS_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RCC_CRS_IRQHandler
+ B RCC_CRS_IRQHandler
+
+ PUBWEAK EXTI0_1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI0_1_IRQHandler
+ B EXTI0_1_IRQHandler
+
+ PUBWEAK EXTI2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI2_3_IRQHandler
+ B EXTI2_3_IRQHandler
+
+ PUBWEAK EXTI4_15_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI4_15_IRQHandler
+ B EXTI4_15_IRQHandler
+
+ PUBWEAK TSC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TSC_IRQHandler
+ B TSC_IRQHandler
+
+ PUBWEAK DMA1_Channel1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel1_IRQHandler
+ B DMA1_Channel1_IRQHandler
+
+ PUBWEAK DMA1_Channel2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel2_3_IRQHandler
+ B DMA1_Channel2_3_IRQHandler
+
+ PUBWEAK DMA1_Channel4_5_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel4_5_IRQHandler
+ B DMA1_Channel4_5_IRQHandler
+
+ PUBWEAK ADC1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+ADC1_IRQHandler
+ B ADC1_IRQHandler
+
+ PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_BRK_UP_TRG_COM_IRQHandler
+ B TIM1_BRK_UP_TRG_COM_IRQHandler
+
+ PUBWEAK TIM1_CC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_CC_IRQHandler
+ B TIM1_CC_IRQHandler
+
+ PUBWEAK TIM2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM2_IRQHandler
+ B TIM2_IRQHandler
+
+ PUBWEAK TIM3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM3_IRQHandler
+ B TIM3_IRQHandler
+
+ PUBWEAK TIM14_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM14_IRQHandler
+ B TIM14_IRQHandler
+
+ PUBWEAK TIM16_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM16_IRQHandler
+ B TIM16_IRQHandler
+
+ PUBWEAK TIM17_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM17_IRQHandler
+ B TIM17_IRQHandler
+
+ PUBWEAK I2C1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C1_IRQHandler
+ B I2C1_IRQHandler
+
+ PUBWEAK SPI1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI1_IRQHandler
+ B SPI1_IRQHandler
+
+ PUBWEAK SPI2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI2_IRQHandler
+ B SPI2_IRQHandler
+
+ PUBWEAK USART1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART1_IRQHandler
+ B USART1_IRQHandler
+
+ PUBWEAK USART2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART2_IRQHandler
+ B USART2_IRQHandler
+
+ PUBWEAK CEC_CAN_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+CEC_CAN_IRQHandler
+ B CEC_CAN_IRQHandler
+
+ PUBWEAK USB_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USB_IRQHandler
+ B USB_IRQHandler
+
+ END
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f048xx.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f048xx.s new file mode 100644 index 0000000..24d7c60 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f048xx.s @@ -0,0 +1,283 @@ +;*******************************************************************************
+;* File Name : startup_stm32f048xx.s
+;* Author : MCD Application Team
+;* Description : STM32F048xx devices vector table for EWARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == __iar_program_start,
+;* - Set the vector table entries with the exceptions ISR
+;* address,
+;* - Branches to main in the C library (which eventually
+;* calls main()).
+;* After Reset the Cortex-M0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* @attention
+;*
+;* <h2><center>© Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+ MODULE ?cstartup
+
+ ;; Forward declaration of sections.
+ SECTION CSTACK:DATA:NOROOT(3)
+
+ SECTION .intvec:CODE:NOROOT(2)
+
+ EXTERN __iar_program_start
+ EXTERN SystemInit
+ PUBLIC __vector_table
+
+ DATA
+__vector_table
+ DCD sfe(CSTACK)
+ DCD Reset_Handler ; Reset Handler
+
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD VDDIO2_IRQHandler ; VDDIO2 Monitor through EXTI Line 31
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_CRS_IRQHandler ; RCC and CRS
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD TSC_IRQHandler ; TSC
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_IRQHandler ; ADC1
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM14_IRQHandler ; TIM14
+ DCD 0 ; Reserved
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD 0 ; Reserved
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD 0 ; Reserved
+ DCD CEC_CAN_IRQHandler ; CEC and CAN
+ DCD USB_IRQHandler ; USB
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+ THUMB
+
+ PUBWEAK Reset_Handler
+ SECTION .text:CODE:NOROOT:REORDER(2)
+Reset_Handler
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__iar_program_start
+ BX R0
+
+ PUBWEAK NMI_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+NMI_Handler
+ B NMI_Handler
+
+ PUBWEAK HardFault_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+HardFault_Handler
+ B HardFault_Handler
+
+ PUBWEAK SVC_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SVC_Handler
+ B SVC_Handler
+
+ PUBWEAK PendSV_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+PendSV_Handler
+ B PendSV_Handler
+
+ PUBWEAK SysTick_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SysTick_Handler
+ B SysTick_Handler
+
+ PUBWEAK WWDG_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+WWDG_IRQHandler
+ B WWDG_IRQHandler
+
+ PUBWEAK VDDIO2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+VDDIO2_IRQHandler
+ B VDDIO2_IRQHandler
+
+ PUBWEAK RTC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RTC_IRQHandler
+ B RTC_IRQHandler
+
+ PUBWEAK FLASH_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+FLASH_IRQHandler
+ B FLASH_IRQHandler
+
+ PUBWEAK RCC_CRS_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RCC_CRS_IRQHandler
+ B RCC_CRS_IRQHandler
+
+ PUBWEAK EXTI0_1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI0_1_IRQHandler
+ B EXTI0_1_IRQHandler
+
+ PUBWEAK EXTI2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI2_3_IRQHandler
+ B EXTI2_3_IRQHandler
+
+ PUBWEAK EXTI4_15_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI4_15_IRQHandler
+ B EXTI4_15_IRQHandler
+
+ PUBWEAK TSC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TSC_IRQHandler
+ B TSC_IRQHandler
+
+ PUBWEAK DMA1_Channel1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel1_IRQHandler
+ B DMA1_Channel1_IRQHandler
+
+ PUBWEAK DMA1_Channel2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel2_3_IRQHandler
+ B DMA1_Channel2_3_IRQHandler
+
+ PUBWEAK DMA1_Channel4_5_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel4_5_IRQHandler
+ B DMA1_Channel4_5_IRQHandler
+
+ PUBWEAK ADC1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+ADC1_IRQHandler
+ B ADC1_IRQHandler
+
+ PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_BRK_UP_TRG_COM_IRQHandler
+ B TIM1_BRK_UP_TRG_COM_IRQHandler
+
+ PUBWEAK TIM1_CC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_CC_IRQHandler
+ B TIM1_CC_IRQHandler
+
+ PUBWEAK TIM2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM2_IRQHandler
+ B TIM2_IRQHandler
+
+ PUBWEAK TIM3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM3_IRQHandler
+ B TIM3_IRQHandler
+
+ PUBWEAK TIM14_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM14_IRQHandler
+ B TIM14_IRQHandler
+
+ PUBWEAK TIM16_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM16_IRQHandler
+ B TIM16_IRQHandler
+
+ PUBWEAK TIM17_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM17_IRQHandler
+ B TIM17_IRQHandler
+
+ PUBWEAK I2C1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C1_IRQHandler
+ B I2C1_IRQHandler
+
+ PUBWEAK SPI1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI1_IRQHandler
+ B SPI1_IRQHandler
+
+ PUBWEAK SPI2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI2_IRQHandler
+ B SPI2_IRQHandler
+
+ PUBWEAK USART1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART1_IRQHandler
+ B USART1_IRQHandler
+
+ PUBWEAK USART2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART2_IRQHandler
+ B USART2_IRQHandler
+
+ PUBWEAK CEC_CAN_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+CEC_CAN_IRQHandler
+ B CEC_CAN_IRQHandler
+
+ PUBWEAK USB_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USB_IRQHandler
+ B USB_IRQHandler
+
+ END
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f051x8.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f051x8.s new file mode 100644 index 0000000..14bd025 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f051x8.s @@ -0,0 +1,293 @@ +;*******************************************************************************
+;* File Name : startup_stm32f051x8.s
+;* Author : MCD Application Team
+;* Description : STM32F051x4/STM32F051x6/STM32F051x8 devices vector table
+;* for EWARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == __iar_program_start,
+;* - Set the vector table entries with the exceptions ISR
+;* address,
+;* - Branches to main in the C library (which eventually
+;* calls main()).
+;* After Reset the Cortex-M0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* @attention
+;*
+;* <h2><center>© Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+ MODULE ?cstartup
+
+ ;; Forward declaration of sections.
+ SECTION CSTACK:DATA:NOROOT(3)
+
+ SECTION .intvec:CODE:NOROOT(2)
+
+ EXTERN __iar_program_start
+ EXTERN SystemInit
+ PUBLIC __vector_table
+
+ DATA
+__vector_table
+ DCD sfe(CSTACK)
+ DCD Reset_Handler ; Reset Handler
+
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detect
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_CRS_IRQHandler ; RCC and CRS
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD TSC_IRQHandler ; TSC
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
+ DCD 0 ; Reserved
+ DCD TIM14_IRQHandler ; TIM14
+ DCD TIM15_IRQHandler ; TIM15
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD I2C2_IRQHandler ; I2C2
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD 0 ; Reserved
+ DCD CEC_CAN_IRQHandler ; CEC and CAN
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+ THUMB
+
+ PUBWEAK Reset_Handler
+ SECTION .text:CODE:NOROOT:REORDER(2)
+Reset_Handler
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__iar_program_start
+ BX R0
+
+ PUBWEAK NMI_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+NMI_Handler
+ B NMI_Handler
+
+ PUBWEAK HardFault_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+HardFault_Handler
+ B HardFault_Handler
+
+ PUBWEAK SVC_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SVC_Handler
+ B SVC_Handler
+
+ PUBWEAK PendSV_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+PendSV_Handler
+ B PendSV_Handler
+
+ PUBWEAK SysTick_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SysTick_Handler
+ B SysTick_Handler
+
+ PUBWEAK WWDG_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+WWDG_IRQHandler
+ B WWDG_IRQHandler
+
+ PUBWEAK PVD_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+PVD_IRQHandler
+ B PVD_IRQHandler
+
+ PUBWEAK RTC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RTC_IRQHandler
+ B RTC_IRQHandler
+
+ PUBWEAK FLASH_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+FLASH_IRQHandler
+ B FLASH_IRQHandler
+
+ PUBWEAK RCC_CRS_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RCC_CRS_IRQHandler
+ B RCC_CRS_IRQHandler
+
+ PUBWEAK EXTI0_1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI0_1_IRQHandler
+ B EXTI0_1_IRQHandler
+
+ PUBWEAK EXTI2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI2_3_IRQHandler
+ B EXTI2_3_IRQHandler
+
+ PUBWEAK EXTI4_15_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI4_15_IRQHandler
+ B EXTI4_15_IRQHandler
+
+ PUBWEAK TSC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TSC_IRQHandler
+ B TSC_IRQHandler
+
+ PUBWEAK DMA1_Channel1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel1_IRQHandler
+ B DMA1_Channel1_IRQHandler
+
+ PUBWEAK DMA1_Channel2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel2_3_IRQHandler
+ B DMA1_Channel2_3_IRQHandler
+
+ PUBWEAK DMA1_Channel4_5_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel4_5_IRQHandler
+ B DMA1_Channel4_5_IRQHandler
+
+ PUBWEAK ADC1_COMP_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+ADC1_COMP_IRQHandler
+ B ADC1_COMP_IRQHandler
+
+ PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_BRK_UP_TRG_COM_IRQHandler
+ B TIM1_BRK_UP_TRG_COM_IRQHandler
+
+ PUBWEAK TIM1_CC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_CC_IRQHandler
+ B TIM1_CC_IRQHandler
+
+ PUBWEAK TIM2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM2_IRQHandler
+ B TIM2_IRQHandler
+
+ PUBWEAK TIM3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM3_IRQHandler
+ B TIM3_IRQHandler
+
+ PUBWEAK TIM6_DAC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM6_DAC_IRQHandler
+ B TIM6_DAC_IRQHandler
+
+ PUBWEAK TIM14_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM14_IRQHandler
+ B TIM14_IRQHandler
+
+ PUBWEAK TIM15_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM15_IRQHandler
+ B TIM15_IRQHandler
+
+ PUBWEAK TIM16_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM16_IRQHandler
+ B TIM16_IRQHandler
+
+ PUBWEAK TIM17_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM17_IRQHandler
+ B TIM17_IRQHandler
+
+ PUBWEAK I2C1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C1_IRQHandler
+ B I2C1_IRQHandler
+
+ PUBWEAK I2C2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C2_IRQHandler
+ B I2C2_IRQHandler
+
+ PUBWEAK SPI1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI1_IRQHandler
+ B SPI1_IRQHandler
+
+ PUBWEAK SPI2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI2_IRQHandler
+ B SPI2_IRQHandler
+
+ PUBWEAK USART1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART1_IRQHandler
+ B USART1_IRQHandler
+
+ PUBWEAK USART2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART2_IRQHandler
+ B USART2_IRQHandler
+
+ PUBWEAK CEC_CAN_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+CEC_CAN_IRQHandler
+ B CEC_CAN_IRQHandler
+
+ END
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f058xx.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f058xx.s new file mode 100644 index 0000000..d39c089 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f058xx.s @@ -0,0 +1,287 @@ +;*******************************************************************************
+;* File Name : startup_stm32f058xx.s
+;* Author : MCD Application Team
+;* Description : STM32F058xx devices vector table for EWARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == __iar_program_start,
+;* - Set the vector table entries with the exceptions ISR
+;* address,
+;* - Branches to main in the C library (which eventually
+;* calls main()).
+;* After Reset the Cortex-M0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* @attention
+;*
+;* <h2><center>© Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+ MODULE ?cstartup
+
+ ;; Forward declaration of sections.
+ SECTION CSTACK:DATA:NOROOT(3)
+
+ SECTION .intvec:CODE:NOROOT(2)
+
+ EXTERN __iar_program_start
+ EXTERN SystemInit
+ PUBLIC __vector_table
+
+ DATA
+__vector_table
+ DCD sfe(CSTACK)
+ DCD Reset_Handler ; Reset Handler
+
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD 0 ; Reserved
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_CRS_IRQHandler ; RCC and CRS
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD TSC_IRQHandler ; TSC
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
+ DCD 0 ; Reserved
+ DCD TIM14_IRQHandler ; TIM14
+ DCD TIM15_IRQHandler ; TIM15
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD I2C2_IRQHandler ; I2C2
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD 0 ; Reserved
+ DCD CEC_CAN_IRQHandler ; CEC and CAN
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+ THUMB
+
+ PUBWEAK Reset_Handler
+ SECTION .text:CODE:NOROOT:REORDER(2)
+Reset_Handler
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__iar_program_start
+ BX R0
+
+ PUBWEAK NMI_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+NMI_Handler
+ B NMI_Handler
+
+ PUBWEAK HardFault_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+HardFault_Handler
+ B HardFault_Handler
+
+ PUBWEAK SVC_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SVC_Handler
+ B SVC_Handler
+
+ PUBWEAK PendSV_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+PendSV_Handler
+ B PendSV_Handler
+
+ PUBWEAK SysTick_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SysTick_Handler
+ B SysTick_Handler
+
+ PUBWEAK WWDG_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+WWDG_IRQHandler
+ B WWDG_IRQHandler
+
+ PUBWEAK RTC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RTC_IRQHandler
+ B RTC_IRQHandler
+
+ PUBWEAK FLASH_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+FLASH_IRQHandler
+ B FLASH_IRQHandler
+
+ PUBWEAK RCC_CRS_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RCC_CRS_IRQHandler
+ B RCC_CRS_IRQHandler
+
+ PUBWEAK EXTI0_1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI0_1_IRQHandler
+ B EXTI0_1_IRQHandler
+
+ PUBWEAK EXTI2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI2_3_IRQHandler
+ B EXTI2_3_IRQHandler
+
+ PUBWEAK EXTI4_15_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI4_15_IRQHandler
+ B EXTI4_15_IRQHandler
+
+ PUBWEAK TSC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TSC_IRQHandler
+ B TSC_IRQHandler
+
+ PUBWEAK DMA1_Channel1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel1_IRQHandler
+ B DMA1_Channel1_IRQHandler
+
+ PUBWEAK DMA1_Channel2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel2_3_IRQHandler
+ B DMA1_Channel2_3_IRQHandler
+
+ PUBWEAK DMA1_Channel4_5_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel4_5_IRQHandler
+ B DMA1_Channel4_5_IRQHandler
+
+ PUBWEAK ADC1_COMP_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+ADC1_COMP_IRQHandler
+ B ADC1_COMP_IRQHandler
+
+ PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_BRK_UP_TRG_COM_IRQHandler
+ B TIM1_BRK_UP_TRG_COM_IRQHandler
+
+ PUBWEAK TIM1_CC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_CC_IRQHandler
+ B TIM1_CC_IRQHandler
+
+ PUBWEAK TIM2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM2_IRQHandler
+ B TIM2_IRQHandler
+
+ PUBWEAK TIM3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM3_IRQHandler
+ B TIM3_IRQHandler
+
+ PUBWEAK TIM6_DAC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM6_DAC_IRQHandler
+ B TIM6_DAC_IRQHandler
+
+ PUBWEAK TIM14_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM14_IRQHandler
+ B TIM14_IRQHandler
+
+ PUBWEAK TIM15_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM15_IRQHandler
+ B TIM15_IRQHandler
+
+ PUBWEAK TIM16_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM16_IRQHandler
+ B TIM16_IRQHandler
+
+ PUBWEAK TIM17_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM17_IRQHandler
+ B TIM17_IRQHandler
+
+ PUBWEAK I2C1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C1_IRQHandler
+ B I2C1_IRQHandler
+
+ PUBWEAK I2C2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C2_IRQHandler
+ B I2C2_IRQHandler
+
+ PUBWEAK SPI1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI1_IRQHandler
+ B SPI1_IRQHandler
+
+ PUBWEAK SPI2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI2_IRQHandler
+ B SPI2_IRQHandler
+
+ PUBWEAK USART1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART1_IRQHandler
+ B USART1_IRQHandler
+
+ PUBWEAK USART2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART2_IRQHandler
+ B USART2_IRQHandler
+
+ PUBWEAK CEC_CAN_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+CEC_CAN_IRQHandler
+ B CEC_CAN_IRQHandler
+
+ END
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f070x6.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f070x6.s new file mode 100644 index 0000000..d387ddf --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f070x6.s @@ -0,0 +1,281 @@ +;*******************************************************************************
+;* File Name : startup_stm32f070x6.s
+;* Author : MCD Application Team
+;* Description : STM32F070x6 devices vector table for EWARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == __iar_program_start,
+;* - Set the vector table entries with the exceptions ISR
+;* address,
+;* - Branches to main in the C library (which eventually
+;* calls main()).
+;* After Reset the Cortex-M0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* @attention
+;*
+;* <h2><center>© Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+ MODULE ?cstartup
+
+ ;; Forward declaration of sections.
+ SECTION CSTACK:DATA:NOROOT(3)
+
+ SECTION .intvec:CODE:NOROOT(2)
+
+ EXTERN __iar_program_start
+ EXTERN SystemInit
+ PUBLIC __vector_table
+
+ DATA
+__vector_table
+ DCD sfe(CSTACK)
+ DCD Reset_Handler ; Reset Handler
+
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD 0 ; Reserved
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD 0 ; Reserved
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_IRQHandler ; ADC1
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD 0 ; Reserved
+ DCD TIM3_IRQHandler ; TIM3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM14_IRQHandler ; TIM14
+ DCD 0 ; Reserved
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD 0 ; Reserved
+ DCD SPI1_IRQHandler ; SPI1
+ DCD 0 ; Reserved
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD USB_IRQHandler ; USB
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+ THUMB
+
+ PUBWEAK Reset_Handler
+ SECTION .text:CODE:NOROOT:REORDER(2)
+Reset_Handler
+
+ LDR R0, =sfe(CSTACK) ; set stack pointer
+ MSR MSP, R0
+
+;;Check if boot space corresponds to test memory
+ LDR R0,=0x00000004
+ LDR R1, [R0]
+ LSRS R1, R1, #24
+ LDR R2,=0x1F
+ CMP R1, R2
+
+ BNE ApplicationStart
+;; SYSCFG clock enable
+ LDR R0,=0x40021018
+ LDR R1,=0x00000001
+ STR R1, [R0]
+
+;; Set CFGR1 register with flash memory remap at address 0
+
+ LDR R0,=0x40010000
+ LDR R1,=0x00000000
+ STR R1, [R0]
+ApplicationStart
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__iar_program_start
+ BX R0
+
+ PUBWEAK NMI_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+NMI_Handler
+ B NMI_Handler
+
+ PUBWEAK HardFault_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+HardFault_Handler
+ B HardFault_Handler
+
+ PUBWEAK SVC_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SVC_Handler
+ B SVC_Handler
+
+ PUBWEAK PendSV_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+PendSV_Handler
+ B PendSV_Handler
+
+ PUBWEAK SysTick_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SysTick_Handler
+ B SysTick_Handler
+
+ PUBWEAK WWDG_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+WWDG_IRQHandler
+ B WWDG_IRQHandler
+
+ PUBWEAK RTC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RTC_IRQHandler
+ B RTC_IRQHandler
+
+ PUBWEAK FLASH_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+FLASH_IRQHandler
+ B FLASH_IRQHandler
+
+ PUBWEAK RCC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RCC_IRQHandler
+ B RCC_IRQHandler
+
+ PUBWEAK EXTI0_1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI0_1_IRQHandler
+ B EXTI0_1_IRQHandler
+
+ PUBWEAK EXTI2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI2_3_IRQHandler
+ B EXTI2_3_IRQHandler
+
+ PUBWEAK EXTI4_15_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI4_15_IRQHandler
+ B EXTI4_15_IRQHandler
+
+ PUBWEAK DMA1_Channel1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel1_IRQHandler
+ B DMA1_Channel1_IRQHandler
+
+ PUBWEAK DMA1_Channel2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel2_3_IRQHandler
+ B DMA1_Channel2_3_IRQHandler
+
+ PUBWEAK DMA1_Channel4_5_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel4_5_IRQHandler
+ B DMA1_Channel4_5_IRQHandler
+
+ PUBWEAK ADC1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+ADC1_IRQHandler
+ B ADC1_IRQHandler
+
+ PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_BRK_UP_TRG_COM_IRQHandler
+ B TIM1_BRK_UP_TRG_COM_IRQHandler
+
+ PUBWEAK TIM1_CC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_CC_IRQHandler
+ B TIM1_CC_IRQHandler
+
+ PUBWEAK TIM3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM3_IRQHandler
+ B TIM3_IRQHandler
+
+ PUBWEAK TIM14_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM14_IRQHandler
+ B TIM14_IRQHandler
+
+ PUBWEAK TIM16_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM16_IRQHandler
+ B TIM16_IRQHandler
+
+ PUBWEAK TIM17_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM17_IRQHandler
+ B TIM17_IRQHandler
+
+ PUBWEAK I2C1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C1_IRQHandler
+ B I2C1_IRQHandler
+
+ PUBWEAK SPI1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI1_IRQHandler
+ B SPI1_IRQHandler
+
+ PUBWEAK USART1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART1_IRQHandler
+ B USART1_IRQHandler
+
+ PUBWEAK USART2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART2_IRQHandler
+ B USART2_IRQHandler
+
+ PUBWEAK USB_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USB_IRQHandler
+ B USB_IRQHandler
+
+ END
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f070xb.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f070xb.s new file mode 100644 index 0000000..e66127f --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f070xb.s @@ -0,0 +1,288 @@ +;*******************************************************************************
+;* File Name : startup_stm32f070xb.s
+;* Author : MCD Application Team
+;* Description : STM32F070xB devices vector table for EWARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == __iar_program_start,
+;* - Set the vector table entries with the exceptions ISR
+;* address,
+;* - Branches to main in the C library (which eventually
+;* calls main()).
+;* After Reset the Cortex-M0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* @attention
+;*
+;* <h2><center>© Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+ MODULE ?cstartup
+
+ ;; Forward declaration of sections.
+ SECTION CSTACK:DATA:NOROOT(3)
+
+ SECTION .intvec:CODE:NOROOT(2)
+
+ EXTERN __iar_program_start
+ EXTERN SystemInit
+ PUBLIC __vector_table
+
+ DATA
+__vector_table
+ DCD sfe(CSTACK)
+ DCD Reset_Handler ; Reset Handler
+
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD 0 ; Reserved
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD 0 ; Reserved
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
+ DCD ADC1_IRQHandler ; ADC1
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD 0 ; Reserved
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM6_IRQHandler ; TIM6
+ DCD TIM7_IRQHandler ; TIM7
+ DCD TIM14_IRQHandler ; TIM14
+ DCD TIM15_IRQHandler ; TIM15
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD I2C2_IRQHandler ; I2C2
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_4_IRQHandler ; USART3 and USART4
+ DCD 0 ; Reserved
+ DCD USB_IRQHandler ; USB
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+ THUMB
+
+ PUBWEAK Reset_Handler
+ SECTION .text:CODE:NOROOT:REORDER(2)
+Reset_Handler
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__iar_program_start
+ BX R0
+
+ PUBWEAK NMI_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+NMI_Handler
+ B NMI_Handler
+
+ PUBWEAK HardFault_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+HardFault_Handler
+ B HardFault_Handler
+
+ PUBWEAK SVC_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SVC_Handler
+ B SVC_Handler
+
+ PUBWEAK PendSV_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+PendSV_Handler
+ B PendSV_Handler
+
+ PUBWEAK SysTick_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SysTick_Handler
+ B SysTick_Handler
+
+ PUBWEAK WWDG_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+WWDG_IRQHandler
+ B WWDG_IRQHandler
+
+ PUBWEAK RTC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RTC_IRQHandler
+ B RTC_IRQHandler
+
+ PUBWEAK FLASH_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+FLASH_IRQHandler
+ B FLASH_IRQHandler
+
+ PUBWEAK RCC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RCC_IRQHandler
+ B RCC_IRQHandler
+
+ PUBWEAK EXTI0_1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI0_1_IRQHandler
+ B EXTI0_1_IRQHandler
+
+ PUBWEAK EXTI2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI2_3_IRQHandler
+ B EXTI2_3_IRQHandler
+
+ PUBWEAK EXTI4_15_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI4_15_IRQHandler
+ B EXTI4_15_IRQHandler
+
+ PUBWEAK DMA1_Channel1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel1_IRQHandler
+ B DMA1_Channel1_IRQHandler
+
+ PUBWEAK DMA1_Channel2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel2_3_IRQHandler
+ B DMA1_Channel2_3_IRQHandler
+
+ PUBWEAK DMA1_Channel4_5_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel4_5_IRQHandler
+ B DMA1_Channel4_5_IRQHandler
+
+ PUBWEAK ADC1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+ADC1_IRQHandler
+ B ADC1_IRQHandler
+
+ PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_BRK_UP_TRG_COM_IRQHandler
+ B TIM1_BRK_UP_TRG_COM_IRQHandler
+
+ PUBWEAK TIM1_CC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_CC_IRQHandler
+ B TIM1_CC_IRQHandler
+
+ PUBWEAK TIM3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM3_IRQHandler
+ B TIM3_IRQHandler
+
+ PUBWEAK TIM6_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM6_IRQHandler
+ B TIM6_IRQHandler
+
+ PUBWEAK TIM7_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM7_IRQHandler
+ B TIM7_IRQHandler
+
+ PUBWEAK TIM14_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM14_IRQHandler
+ B TIM14_IRQHandler
+
+ PUBWEAK TIM15_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM15_IRQHandler
+ B TIM15_IRQHandler
+
+ PUBWEAK TIM16_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM16_IRQHandler
+ B TIM16_IRQHandler
+
+ PUBWEAK TIM17_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM17_IRQHandler
+ B TIM17_IRQHandler
+
+ PUBWEAK I2C1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C1_IRQHandler
+ B I2C1_IRQHandler
+
+ PUBWEAK I2C2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C2_IRQHandler
+ B I2C2_IRQHandler
+
+ PUBWEAK SPI1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI1_IRQHandler
+ B SPI1_IRQHandler
+
+ PUBWEAK SPI2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI2_IRQHandler
+ B SPI2_IRQHandler
+
+ PUBWEAK USART1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART1_IRQHandler
+ B USART1_IRQHandler
+
+ PUBWEAK USART2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART2_IRQHandler
+ B USART2_IRQHandler
+
+ PUBWEAK USART3_4_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART3_4_IRQHandler
+ B USART3_4_IRQHandler
+
+ PUBWEAK USB_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USB_IRQHandler
+ B USB_IRQHandler
+
+ END
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f071xb.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f071xb.s new file mode 100644 index 0000000..d716fab --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f071xb.s @@ -0,0 +1,302 @@ +;*******************************************************************************
+;* File Name : startup_stm32f071xb.s
+;* Author : MCD Application Team
+;* Description : STM32F071x8/STM32F071xB devices vector table for EWARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == __iar_program_start,
+;* - Set the vector table entries with the exceptions ISR
+;* address,
+;* - Branches to main in the C library (which eventually
+;* calls main()).
+;* After Reset the Cortex-M0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* @attention
+;*
+;* <h2><center>© Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+ MODULE ?cstartup
+
+ ;; Forward declaration of sections.
+ SECTION CSTACK:DATA:NOROOT(3)
+
+ SECTION .intvec:CODE:NOROOT(2)
+
+ EXTERN __iar_program_start
+ EXTERN SystemInit
+ PUBLIC __vector_table
+
+ DATA
+__vector_table
+ DCD sfe(CSTACK)
+ DCD Reset_Handler ; Reset Handler
+
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_CRS_IRQHandler ; RCC and CRS
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD TSC_IRQHandler ; TSC
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4 to Channel 7
+ DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
+ DCD TIM7_IRQHandler ; TIM7
+ DCD TIM14_IRQHandler ; TIM14
+ DCD TIM15_IRQHandler ; TIM15
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD I2C2_IRQHandler ; I2C2
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_4_IRQHandler ; USART3 and USART4
+ DCD CEC_CAN_IRQHandler ; CEC and CAN
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+ THUMB
+
+ PUBWEAK Reset_Handler
+ SECTION .text:CODE:NOROOT:REORDER(2)
+Reset_Handler
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__iar_program_start
+ BX R0
+
+ PUBWEAK NMI_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+NMI_Handler
+ B NMI_Handler
+
+ PUBWEAK HardFault_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+HardFault_Handler
+ B HardFault_Handler
+
+ PUBWEAK SVC_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SVC_Handler
+ B SVC_Handler
+
+ PUBWEAK PendSV_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+PendSV_Handler
+ B PendSV_Handler
+
+ PUBWEAK SysTick_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SysTick_Handler
+ B SysTick_Handler
+
+ PUBWEAK WWDG_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+WWDG_IRQHandler
+ B WWDG_IRQHandler
+
+ PUBWEAK PVD_VDDIO2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+PVD_VDDIO2_IRQHandler
+ B PVD_VDDIO2_IRQHandler
+
+ PUBWEAK RTC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RTC_IRQHandler
+ B RTC_IRQHandler
+
+ PUBWEAK FLASH_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+FLASH_IRQHandler
+ B FLASH_IRQHandler
+
+ PUBWEAK RCC_CRS_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RCC_CRS_IRQHandler
+ B RCC_CRS_IRQHandler
+
+ PUBWEAK EXTI0_1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI0_1_IRQHandler
+ B EXTI0_1_IRQHandler
+
+ PUBWEAK EXTI2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI2_3_IRQHandler
+ B EXTI2_3_IRQHandler
+
+ PUBWEAK EXTI4_15_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI4_15_IRQHandler
+ B EXTI4_15_IRQHandler
+
+ PUBWEAK TSC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TSC_IRQHandler
+ B TSC_IRQHandler
+
+ PUBWEAK DMA1_Channel1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel1_IRQHandler
+ B DMA1_Channel1_IRQHandler
+
+ PUBWEAK DMA1_Channel2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel2_3_IRQHandler
+ B DMA1_Channel2_3_IRQHandler
+
+ PUBWEAK DMA1_Channel4_5_6_7_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel4_5_6_7_IRQHandler
+ B DMA1_Channel4_5_6_7_IRQHandler
+
+ PUBWEAK ADC1_COMP_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+ADC1_COMP_IRQHandler
+ B ADC1_COMP_IRQHandler
+
+ PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_BRK_UP_TRG_COM_IRQHandler
+ B TIM1_BRK_UP_TRG_COM_IRQHandler
+
+ PUBWEAK TIM1_CC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_CC_IRQHandler
+ B TIM1_CC_IRQHandler
+
+ PUBWEAK TIM2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM2_IRQHandler
+ B TIM2_IRQHandler
+
+ PUBWEAK TIM3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM3_IRQHandler
+ B TIM3_IRQHandler
+
+ PUBWEAK TIM6_DAC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM6_DAC_IRQHandler
+ B TIM6_DAC_IRQHandler
+
+ PUBWEAK TIM7_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM7_IRQHandler
+ B TIM7_IRQHandler
+
+ PUBWEAK TIM14_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM14_IRQHandler
+ B TIM14_IRQHandler
+
+ PUBWEAK TIM15_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM15_IRQHandler
+ B TIM15_IRQHandler
+
+ PUBWEAK TIM16_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM16_IRQHandler
+ B TIM16_IRQHandler
+
+ PUBWEAK TIM17_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM17_IRQHandler
+ B TIM17_IRQHandler
+
+ PUBWEAK I2C1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C1_IRQHandler
+ B I2C1_IRQHandler
+
+ PUBWEAK I2C2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C2_IRQHandler
+ B I2C2_IRQHandler
+
+ PUBWEAK SPI1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI1_IRQHandler
+ B SPI1_IRQHandler
+
+ PUBWEAK SPI2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI2_IRQHandler
+ B SPI2_IRQHandler
+
+ PUBWEAK USART1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART1_IRQHandler
+ B USART1_IRQHandler
+
+ PUBWEAK USART2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART2_IRQHandler
+ B USART2_IRQHandler
+
+ PUBWEAK USART3_4_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART3_4_IRQHandler
+ B USART3_4_IRQHandler
+
+ PUBWEAK CEC_CAN_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+CEC_CAN_IRQHandler
+ B CEC_CAN_IRQHandler
+
+ END
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f072xb.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f072xb.s new file mode 100644 index 0000000..b92a665 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f072xb.s @@ -0,0 +1,308 @@ +;*******************************************************************************
+;* File Name : startup_stm32f072xb.s
+;* Author : MCD Application Team
+;* Description : STM32F072x8/STM32F072xB devices vector table for EWARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == __iar_program_start,
+;* - Set the vector table entries with the exceptions ISR
+;* address,
+;* - Branches to main in the C library (which eventually
+;* calls main()).
+;* After Reset the Cortex-M0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* @attention
+;*
+;* <h2><center>© Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+ MODULE ?cstartup
+
+ ;; Forward declaration of sections.
+ SECTION CSTACK:DATA:NOROOT(3)
+
+ SECTION .intvec:CODE:NOROOT(2)
+
+ EXTERN __iar_program_start
+ EXTERN SystemInit
+ PUBLIC __vector_table
+
+ DATA
+__vector_table
+ DCD sfe(CSTACK)
+ DCD Reset_Handler ; Reset Handler
+
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_CRS_IRQHandler ; RCC and CRS
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD TSC_IRQHandler ; TSC
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4 to Channel 7
+ DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
+ DCD TIM7_IRQHandler ; TIM7
+ DCD TIM14_IRQHandler ; TIM14
+ DCD TIM15_IRQHandler ; TIM15
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD I2C2_IRQHandler ; I2C2
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_4_IRQHandler ; USART3 and USART4
+ DCD CEC_CAN_IRQHandler ; CEC and CAN
+ DCD USB_IRQHandler ; USB
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+ THUMB
+
+ PUBWEAK Reset_Handler
+ SECTION .text:CODE:NOROOT:REORDER(2)
+Reset_Handler
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__iar_program_start
+ BX R0
+
+ PUBWEAK NMI_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+NMI_Handler
+ B NMI_Handler
+
+ PUBWEAK HardFault_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+HardFault_Handler
+ B HardFault_Handler
+
+ PUBWEAK SVC_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SVC_Handler
+ B SVC_Handler
+
+ PUBWEAK PendSV_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+PendSV_Handler
+ B PendSV_Handler
+
+ PUBWEAK SysTick_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SysTick_Handler
+ B SysTick_Handler
+
+ PUBWEAK WWDG_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+WWDG_IRQHandler
+ B WWDG_IRQHandler
+
+ PUBWEAK PVD_VDDIO2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+PVD_VDDIO2_IRQHandler
+ B PVD_VDDIO2_IRQHandler
+
+ PUBWEAK RTC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RTC_IRQHandler
+ B RTC_IRQHandler
+
+ PUBWEAK FLASH_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+FLASH_IRQHandler
+ B FLASH_IRQHandler
+
+ PUBWEAK RCC_CRS_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RCC_CRS_IRQHandler
+ B RCC_CRS_IRQHandler
+
+ PUBWEAK EXTI0_1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI0_1_IRQHandler
+ B EXTI0_1_IRQHandler
+
+ PUBWEAK EXTI2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI2_3_IRQHandler
+ B EXTI2_3_IRQHandler
+
+ PUBWEAK EXTI4_15_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI4_15_IRQHandler
+ B EXTI4_15_IRQHandler
+
+ PUBWEAK TSC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TSC_IRQHandler
+ B TSC_IRQHandler
+
+ PUBWEAK DMA1_Channel1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel1_IRQHandler
+ B DMA1_Channel1_IRQHandler
+
+ PUBWEAK DMA1_Channel2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel2_3_IRQHandler
+ B DMA1_Channel2_3_IRQHandler
+
+ PUBWEAK DMA1_Channel4_5_6_7_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel4_5_6_7_IRQHandler
+ B DMA1_Channel4_5_6_7_IRQHandler
+
+ PUBWEAK ADC1_COMP_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+ADC1_COMP_IRQHandler
+ B ADC1_COMP_IRQHandler
+
+ PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_BRK_UP_TRG_COM_IRQHandler
+ B TIM1_BRK_UP_TRG_COM_IRQHandler
+
+ PUBWEAK TIM1_CC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_CC_IRQHandler
+ B TIM1_CC_IRQHandler
+
+ PUBWEAK TIM2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM2_IRQHandler
+ B TIM2_IRQHandler
+
+ PUBWEAK TIM3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM3_IRQHandler
+ B TIM3_IRQHandler
+
+ PUBWEAK TIM6_DAC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM6_DAC_IRQHandler
+ B TIM6_DAC_IRQHandler
+
+ PUBWEAK TIM7_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM7_IRQHandler
+ B TIM7_IRQHandler
+
+ PUBWEAK TIM14_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM14_IRQHandler
+ B TIM14_IRQHandler
+
+ PUBWEAK TIM15_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM15_IRQHandler
+ B TIM15_IRQHandler
+
+ PUBWEAK TIM16_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM16_IRQHandler
+ B TIM16_IRQHandler
+
+ PUBWEAK TIM17_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM17_IRQHandler
+ B TIM17_IRQHandler
+
+ PUBWEAK I2C1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C1_IRQHandler
+ B I2C1_IRQHandler
+
+ PUBWEAK I2C2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C2_IRQHandler
+ B I2C2_IRQHandler
+
+ PUBWEAK SPI1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI1_IRQHandler
+ B SPI1_IRQHandler
+
+ PUBWEAK SPI2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI2_IRQHandler
+ B SPI2_IRQHandler
+
+ PUBWEAK USART1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART1_IRQHandler
+ B USART1_IRQHandler
+
+ PUBWEAK USART2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART2_IRQHandler
+ B USART2_IRQHandler
+
+ PUBWEAK USART3_4_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART3_4_IRQHandler
+ B USART3_4_IRQHandler
+
+ PUBWEAK CEC_CAN_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+CEC_CAN_IRQHandler
+ B CEC_CAN_IRQHandler
+
+ PUBWEAK USB_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USB_IRQHandler
+ B USB_IRQHandler
+
+ END
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f078xx.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f078xx.s new file mode 100644 index 0000000..d9b9ed2 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f078xx.s @@ -0,0 +1,308 @@ +;*******************************************************************************
+;* File Name : startup_stm32f078xx.s
+;* Author : MCD Application Team
+;* Description : STM32F078xx devices vector table for EWARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == __iar_program_start,
+;* - Set the vector table entries with the exceptions ISR
+;* address,
+;* - Branches to main in the C library (which eventually
+;* calls main()).
+;* After Reset the Cortex-M0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* @attention
+;*
+;* <h2><center>© Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+ MODULE ?cstartup
+
+ ;; Forward declaration of sections.
+ SECTION CSTACK:DATA:NOROOT(3)
+
+ SECTION .intvec:CODE:NOROOT(2)
+
+ EXTERN __iar_program_start
+ EXTERN SystemInit
+ PUBLIC __vector_table
+
+ DATA
+__vector_table
+ DCD sfe(CSTACK)
+ DCD Reset_Handler ; Reset Handler
+
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD VDDIO2_IRQHandler ; VDDIO2 Monitor through EXTI Line 31
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_CRS_IRQHandler ; RCC and CRS
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD TSC_IRQHandler ; TSC
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4 to Channel 7
+ DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
+ DCD TIM7_IRQHandler ; TIM7
+ DCD TIM14_IRQHandler ; TIM14
+ DCD TIM15_IRQHandler ; TIM15
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD I2C2_IRQHandler ; I2C2
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_4_IRQHandler ; USART3 and USART4
+ DCD CEC_CAN_IRQHandler ; CEC and CAN
+ DCD USB_IRQHandler ; USB
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+ THUMB
+
+ PUBWEAK Reset_Handler
+ SECTION .text:CODE:NOROOT:REORDER(2)
+Reset_Handler
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__iar_program_start
+ BX R0
+
+ PUBWEAK NMI_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+NMI_Handler
+ B NMI_Handler
+
+ PUBWEAK HardFault_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+HardFault_Handler
+ B HardFault_Handler
+
+ PUBWEAK SVC_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SVC_Handler
+ B SVC_Handler
+
+ PUBWEAK PendSV_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+PendSV_Handler
+ B PendSV_Handler
+
+ PUBWEAK SysTick_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SysTick_Handler
+ B SysTick_Handler
+
+ PUBWEAK WWDG_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+WWDG_IRQHandler
+ B WWDG_IRQHandler
+
+ PUBWEAK VDDIO2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+VDDIO2_IRQHandler
+ B VDDIO2_IRQHandler
+
+ PUBWEAK RTC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RTC_IRQHandler
+ B RTC_IRQHandler
+
+ PUBWEAK FLASH_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+FLASH_IRQHandler
+ B FLASH_IRQHandler
+
+ PUBWEAK RCC_CRS_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RCC_CRS_IRQHandler
+ B RCC_CRS_IRQHandler
+
+ PUBWEAK EXTI0_1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI0_1_IRQHandler
+ B EXTI0_1_IRQHandler
+
+ PUBWEAK EXTI2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI2_3_IRQHandler
+ B EXTI2_3_IRQHandler
+
+ PUBWEAK EXTI4_15_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI4_15_IRQHandler
+ B EXTI4_15_IRQHandler
+
+ PUBWEAK TSC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TSC_IRQHandler
+ B TSC_IRQHandler
+
+ PUBWEAK DMA1_Channel1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel1_IRQHandler
+ B DMA1_Channel1_IRQHandler
+
+ PUBWEAK DMA1_Channel2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel2_3_IRQHandler
+ B DMA1_Channel2_3_IRQHandler
+
+ PUBWEAK DMA1_Channel4_5_6_7_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel4_5_6_7_IRQHandler
+ B DMA1_Channel4_5_6_7_IRQHandler
+
+ PUBWEAK ADC1_COMP_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+ADC1_COMP_IRQHandler
+ B ADC1_COMP_IRQHandler
+
+ PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_BRK_UP_TRG_COM_IRQHandler
+ B TIM1_BRK_UP_TRG_COM_IRQHandler
+
+ PUBWEAK TIM1_CC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_CC_IRQHandler
+ B TIM1_CC_IRQHandler
+
+ PUBWEAK TIM2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM2_IRQHandler
+ B TIM2_IRQHandler
+
+ PUBWEAK TIM3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM3_IRQHandler
+ B TIM3_IRQHandler
+
+ PUBWEAK TIM6_DAC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM6_DAC_IRQHandler
+ B TIM6_DAC_IRQHandler
+
+ PUBWEAK TIM7_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM7_IRQHandler
+ B TIM7_IRQHandler
+
+ PUBWEAK TIM14_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM14_IRQHandler
+ B TIM14_IRQHandler
+
+ PUBWEAK TIM15_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM15_IRQHandler
+ B TIM15_IRQHandler
+
+ PUBWEAK TIM16_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM16_IRQHandler
+ B TIM16_IRQHandler
+
+ PUBWEAK TIM17_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM17_IRQHandler
+ B TIM17_IRQHandler
+
+ PUBWEAK I2C1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C1_IRQHandler
+ B I2C1_IRQHandler
+
+ PUBWEAK I2C2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C2_IRQHandler
+ B I2C2_IRQHandler
+
+ PUBWEAK SPI1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI1_IRQHandler
+ B SPI1_IRQHandler
+
+ PUBWEAK SPI2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI2_IRQHandler
+ B SPI2_IRQHandler
+
+ PUBWEAK USART1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART1_IRQHandler
+ B USART1_IRQHandler
+
+ PUBWEAK USART2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART2_IRQHandler
+ B USART2_IRQHandler
+
+ PUBWEAK USART3_4_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART3_4_IRQHandler
+ B USART3_4_IRQHandler
+
+ PUBWEAK CEC_CAN_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+CEC_CAN_IRQHandler
+ B CEC_CAN_IRQHandler
+
+ PUBWEAK USB_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USB_IRQHandler
+ B USB_IRQHandler
+
+ END
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f091xc.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f091xc.s new file mode 100644 index 0000000..f7dc0b3 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f091xc.s @@ -0,0 +1,302 @@ +;*******************************************************************************
+;* File Name : startup_stm32f091xc.s
+;* Author : MCD Application Team
+;* Description : STM32F091xc/STM32F098xc devices vector table for EWARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == __iar_program_start,
+;* - Set the vector table entries with the exceptions ISR
+;* address,
+;* - Branches to main in the C library (which eventually
+;* calls main()).
+;* After Reset the Cortex-M0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* @attention
+;*
+;* <h2><center>© Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+ MODULE ?cstartup
+
+ ;; Forward declaration of sections.
+ SECTION CSTACK:DATA:NOROOT(3)
+
+ SECTION .intvec:CODE:NOROOT(2)
+
+ EXTERN __iar_program_start
+ EXTERN SystemInit
+ PUBLIC __vector_table
+
+ DATA
+__vector_table
+ DCD sfe(CSTACK)
+ DCD Reset_Handler ; Reset Handler
+
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_CRS_IRQHandler ; RCC and CRS
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD TSC_IRQHandler ; TS
+ DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
+ DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
+ DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
+ DCD TIM7_IRQHandler ; TIM7
+ DCD TIM14_IRQHandler ; TIM14
+ DCD TIM15_IRQHandler ; TIM15
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD I2C2_IRQHandler ; I2C2
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
+ DCD CEC_CAN_IRQHandler ; CEC and CAN
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+ THUMB
+
+ PUBWEAK Reset_Handler
+ SECTION .text:CODE:NOROOT:REORDER(2)
+Reset_Handler
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__iar_program_start
+ BX R0
+
+ PUBWEAK NMI_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+NMI_Handler
+ B NMI_Handler
+
+ PUBWEAK HardFault_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+HardFault_Handler
+ B HardFault_Handler
+
+ PUBWEAK SVC_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SVC_Handler
+ B SVC_Handler
+
+ PUBWEAK PendSV_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+PendSV_Handler
+ B PendSV_Handler
+
+ PUBWEAK SysTick_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SysTick_Handler
+ B SysTick_Handler
+
+ PUBWEAK WWDG_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+WWDG_IRQHandler
+ B WWDG_IRQHandler
+
+ PUBWEAK PVD_VDDIO2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+PVD_VDDIO2_IRQHandler
+ B PVD_VDDIO2_IRQHandler
+
+ PUBWEAK RTC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RTC_IRQHandler
+ B RTC_IRQHandler
+
+ PUBWEAK FLASH_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+FLASH_IRQHandler
+ B FLASH_IRQHandler
+
+ PUBWEAK RCC_CRS_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RCC_CRS_IRQHandler
+ B RCC_CRS_IRQHandler
+
+ PUBWEAK EXTI0_1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI0_1_IRQHandler
+ B EXTI0_1_IRQHandler
+
+ PUBWEAK EXTI2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI2_3_IRQHandler
+ B EXTI2_3_IRQHandler
+
+ PUBWEAK EXTI4_15_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI4_15_IRQHandler
+ B EXTI4_15_IRQHandler
+
+ PUBWEAK TSC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TSC_IRQHandler
+ B TSC_IRQHandler
+
+ PUBWEAK DMA1_Ch1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Ch1_IRQHandler
+ B DMA1_Ch1_IRQHandler
+
+ PUBWEAK DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
+ B DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
+
+ PUBWEAK DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
+ B DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
+
+ PUBWEAK ADC1_COMP_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+ADC1_COMP_IRQHandler
+ B ADC1_COMP_IRQHandler
+
+ PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_BRK_UP_TRG_COM_IRQHandler
+ B TIM1_BRK_UP_TRG_COM_IRQHandler
+
+ PUBWEAK TIM1_CC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_CC_IRQHandler
+ B TIM1_CC_IRQHandler
+
+ PUBWEAK TIM2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM2_IRQHandler
+ B TIM2_IRQHandler
+
+ PUBWEAK TIM3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM3_IRQHandler
+ B TIM3_IRQHandler
+
+ PUBWEAK TIM6_DAC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM6_DAC_IRQHandler
+ B TIM6_DAC_IRQHandler
+
+ PUBWEAK TIM7_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM7_IRQHandler
+ B TIM7_IRQHandler
+
+ PUBWEAK TIM14_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM14_IRQHandler
+ B TIM14_IRQHandler
+
+ PUBWEAK TIM15_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM15_IRQHandler
+ B TIM15_IRQHandler
+
+ PUBWEAK TIM16_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM16_IRQHandler
+ B TIM16_IRQHandler
+
+ PUBWEAK TIM17_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM17_IRQHandler
+ B TIM17_IRQHandler
+
+ PUBWEAK I2C1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C1_IRQHandler
+ B I2C1_IRQHandler
+
+ PUBWEAK I2C2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C2_IRQHandler
+ B I2C2_IRQHandler
+
+ PUBWEAK SPI1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI1_IRQHandler
+ B SPI1_IRQHandler
+
+ PUBWEAK SPI2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI2_IRQHandler
+ B SPI2_IRQHandler
+
+ PUBWEAK USART1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART1_IRQHandler
+ B USART1_IRQHandler
+
+ PUBWEAK USART2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART2_IRQHandler
+ B USART2_IRQHandler
+
+ PUBWEAK USART3_8_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART3_8_IRQHandler
+ B USART3_8_IRQHandler
+
+ PUBWEAK CEC_CAN_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+CEC_CAN_IRQHandler
+ B CEC_CAN_IRQHandler
+
+ END
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f098xx.s b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f098xx.s new file mode 100644 index 0000000..4d29787 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f098xx.s @@ -0,0 +1,302 @@ +;*******************************************************************************
+;* File Name : startup_stm32f098xx.s
+;* Author : MCD Application Team
+;* Description : STM32F098xx devices vector table for EWARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == __iar_program_start,
+;* - Set the vector table entries with the exceptions ISR
+;* address,
+;* - Branches to main in the C library (which eventually
+;* calls main()).
+;* After Reset the Cortex-M0 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* @attention
+;*
+;* <h2><center>© Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.</center></h2>
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;* opensource.org/licenses/BSD-3-Clause
+;*
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+ MODULE ?cstartup
+
+ ;; Forward declaration of sections.
+ SECTION CSTACK:DATA:NOROOT(3)
+
+ SECTION .intvec:CODE:NOROOT(2)
+
+ EXTERN __iar_program_start
+ EXTERN SystemInit
+ PUBLIC __vector_table
+
+ DATA
+__vector_table
+ DCD sfe(CSTACK)
+ DCD Reset_Handler ; Reset Handler
+
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD VDDIO2_IRQHandler ; VDDIO2 Monitor through EXTI Line 31
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_CRS_IRQHandler ; RCC and CRS
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD TSC_IRQHandler ; TS
+ DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
+ DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
+ DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
+ DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
+ DCD TIM7_IRQHandler ; TIM7
+ DCD TIM14_IRQHandler ; TIM14
+ DCD TIM15_IRQHandler ; TIM15
+ DCD TIM16_IRQHandler ; TIM16
+ DCD TIM17_IRQHandler ; TIM17
+ DCD I2C1_IRQHandler ; I2C1
+ DCD I2C2_IRQHandler ; I2C2
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
+ DCD CEC_CAN_IRQHandler ; CEC and CAN
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+ THUMB
+
+ PUBWEAK Reset_Handler
+ SECTION .text:CODE:NOROOT:REORDER(2)
+Reset_Handler
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__iar_program_start
+ BX R0
+
+ PUBWEAK NMI_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+NMI_Handler
+ B NMI_Handler
+
+ PUBWEAK HardFault_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+HardFault_Handler
+ B HardFault_Handler
+
+ PUBWEAK SVC_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SVC_Handler
+ B SVC_Handler
+
+ PUBWEAK PendSV_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+PendSV_Handler
+ B PendSV_Handler
+
+ PUBWEAK SysTick_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SysTick_Handler
+ B SysTick_Handler
+
+ PUBWEAK WWDG_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+WWDG_IRQHandler
+ B WWDG_IRQHandler
+
+ PUBWEAK VDDIO2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+VDDIO2_IRQHandler
+ B VDDIO2_IRQHandler
+
+ PUBWEAK RTC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RTC_IRQHandler
+ B RTC_IRQHandler
+
+ PUBWEAK FLASH_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+FLASH_IRQHandler
+ B FLASH_IRQHandler
+
+ PUBWEAK RCC_CRS_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RCC_CRS_IRQHandler
+ B RCC_CRS_IRQHandler
+
+ PUBWEAK EXTI0_1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI0_1_IRQHandler
+ B EXTI0_1_IRQHandler
+
+ PUBWEAK EXTI2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI2_3_IRQHandler
+ B EXTI2_3_IRQHandler
+
+ PUBWEAK EXTI4_15_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI4_15_IRQHandler
+ B EXTI4_15_IRQHandler
+
+ PUBWEAK TSC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TSC_IRQHandler
+ B TSC_IRQHandler
+
+ PUBWEAK DMA1_Ch1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Ch1_IRQHandler
+ B DMA1_Ch1_IRQHandler
+
+ PUBWEAK DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
+ B DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
+
+ PUBWEAK DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
+ B DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
+
+ PUBWEAK ADC1_COMP_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+ADC1_COMP_IRQHandler
+ B ADC1_COMP_IRQHandler
+
+ PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_BRK_UP_TRG_COM_IRQHandler
+ B TIM1_BRK_UP_TRG_COM_IRQHandler
+
+ PUBWEAK TIM1_CC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_CC_IRQHandler
+ B TIM1_CC_IRQHandler
+
+ PUBWEAK TIM2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM2_IRQHandler
+ B TIM2_IRQHandler
+
+ PUBWEAK TIM3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM3_IRQHandler
+ B TIM3_IRQHandler
+
+ PUBWEAK TIM6_DAC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM6_DAC_IRQHandler
+ B TIM6_DAC_IRQHandler
+
+ PUBWEAK TIM7_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM7_IRQHandler
+ B TIM7_IRQHandler
+
+ PUBWEAK TIM14_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM14_IRQHandler
+ B TIM14_IRQHandler
+
+ PUBWEAK TIM15_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM15_IRQHandler
+ B TIM15_IRQHandler
+
+ PUBWEAK TIM16_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM16_IRQHandler
+ B TIM16_IRQHandler
+
+ PUBWEAK TIM17_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM17_IRQHandler
+ B TIM17_IRQHandler
+
+ PUBWEAK I2C1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C1_IRQHandler
+ B I2C1_IRQHandler
+
+ PUBWEAK I2C2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C2_IRQHandler
+ B I2C2_IRQHandler
+
+ PUBWEAK SPI1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI1_IRQHandler
+ B SPI1_IRQHandler
+
+ PUBWEAK SPI2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI2_IRQHandler
+ B SPI2_IRQHandler
+
+ PUBWEAK USART1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART1_IRQHandler
+ B USART1_IRQHandler
+
+ PUBWEAK USART2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART2_IRQHandler
+ B USART2_IRQHandler
+
+ PUBWEAK USART3_8_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART3_8_IRQHandler
+ B USART3_8_IRQHandler
+
+ PUBWEAK CEC_CAN_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+CEC_CAN_IRQHandler
+ B CEC_CAN_IRQHandler
+
+ END
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/system_stm32f0xx.c b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/system_stm32f0xx.c new file mode 100644 index 0000000..6a3202b --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/system_stm32f0xx.c @@ -0,0 +1,265 @@ +/**
+ ******************************************************************************
+ * @file system_stm32f0xx.c
+ * @author MCD Application Team
+ * @brief CMSIS Cortex-M0 Device Peripheral Access Layer System Source File.
+ *
+ * 1. This file provides two functions and one global variable to be called from
+ * user application:
+ * - SystemInit(): This function is called at startup just after reset and
+ * before branch to main program. This call is made inside
+ * the "startup_stm32f0xx.s" file.
+ *
+ * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+ * by the user application to setup the SysTick
+ * timer or configure other parameters.
+ *
+ * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+ * be called whenever the core clock is changed
+ * during program execution.
+ *
+ * 2. After each device reset the HSI (8 MHz) is used as system clock source.
+ * Then SystemInit() function is called, in "startup_stm32f0xx.s" file, to
+ * configure the system clock before to branch to main program.
+ *
+ * 3. This file configures the system clock as follows:
+ *=============================================================================
+ * Supported STM32F0xx device
+ *-----------------------------------------------------------------------------
+ * System Clock source | HSI
+ *-----------------------------------------------------------------------------
+ * SYSCLK(Hz) | 8000000
+ *-----------------------------------------------------------------------------
+ * HCLK(Hz) | 8000000
+ *-----------------------------------------------------------------------------
+ * AHB Prescaler | 1
+ *-----------------------------------------------------------------------------
+ * APB1 Prescaler | 1
+ *-----------------------------------------------------------------------------
+ *=============================================================================
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f0xx_system
+ * @{
+ */
+
+/** @addtogroup STM32F0xx_System_Private_Includes
+ * @{
+ */
+
+#include "stm32f0xx.h"
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Private_Defines
+ * @{
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz.
+ This value can be provided and adapted by the user application. */
+#endif /* HSE_VALUE */
+
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)8000000) /*!< Default value of the Internal oscillator in Hz.
+ This value can be provided and adapted by the user application. */
+#endif /* HSI_VALUE */
+
+#if !defined (HSI48_VALUE)
+#define HSI48_VALUE ((uint32_t)48000000) /*!< Default value of the HSI48 Internal oscillator in Hz.
+ This value can be provided and adapted by the user application. */
+#endif /* HSI48_VALUE */
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Private_Variables
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock there is no need to
+ call the 2 first functions listed above, since SystemCoreClock variable is
+ updated automatically.
+ */
+uint32_t SystemCoreClock = 8000000;
+
+const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4};
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Setup the microcontroller system.
+ * @param None
+ * @retval None
+ */
+void SystemInit(void)
+{
+ /* NOTE :SystemInit(): This function is called at startup just after reset and
+ before branch to main program. This call is made inside
+ the "startup_stm32f0xx.s" file.
+ User can setups the default system clock (System clock source, PLL Multiplier
+ and Divider factors, AHB/APBx prescalers and Flash settings).
+ */
+}
+
+/**
+ * @brief Update SystemCoreClock variable according to Clock Register Values.
+ * The SystemCoreClock variable contains the core clock (HCLK), it can
+ * be used by the user application to setup the SysTick timer or configure
+ * other parameters.
+ *
+ * @note Each time the core clock (HCLK) changes, this function must be called
+ * to update SystemCoreClock variable value. Otherwise, any configuration
+ * based on this variable will be incorrect.
+ *
+ * @note - The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ *
+ * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+ *
+ * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+ *
+ * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+ * or HSI_VALUE(*) multiplied/divided by the PLL factors.
+ *
+ * (*) HSI_VALUE is a constant defined in stm32f0xx_hal.h file (default value
+ * 8 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ *
+ * (**) HSE_VALUE is a constant defined in stm32f0xx_hal.h file (default value
+ * 8 MHz), user has to ensure that HSE_VALUE is same as the real
+ * frequency of the crystal used. Otherwise, this function may
+ * have wrong result.
+ *
+ * - The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ *
+ * @param None
+ * @retval None
+ */
+void SystemCoreClockUpdate (void)
+{
+ uint32_t tmp = 0, pllmull = 0, pllsource = 0, predivfactor = 0;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+ switch (tmp)
+ {
+ case RCC_CFGR_SWS_HSI: /* HSI used as system clock */
+ SystemCoreClock = HSI_VALUE;
+ break;
+ case RCC_CFGR_SWS_HSE: /* HSE used as system clock */
+ SystemCoreClock = HSE_VALUE;
+ break;
+ case RCC_CFGR_SWS_PLL: /* PLL used as system clock */
+ /* Get PLL clock source and multiplication factor ----------------------*/
+ pllmull = RCC->CFGR & RCC_CFGR_PLLMUL;
+ pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+ pllmull = ( pllmull >> 18) + 2;
+ predivfactor = (RCC->CFGR2 & RCC_CFGR2_PREDIV) + 1;
+
+ if (pllsource == RCC_CFGR_PLLSRC_HSE_PREDIV)
+ {
+ /* HSE used as PLL clock source : SystemCoreClock = HSE/PREDIV * PLLMUL */
+ SystemCoreClock = (HSE_VALUE/predivfactor) * pllmull;
+ }
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+ else if (pllsource == RCC_CFGR_PLLSRC_HSI48_PREDIV)
+ {
+ /* HSI48 used as PLL clock source : SystemCoreClock = HSI48/PREDIV * PLLMUL */
+ SystemCoreClock = (HSI48_VALUE/predivfactor) * pllmull;
+ }
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx */
+ else
+ {
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) \
+ || defined(STM32F078xx) || defined(STM32F071xB) || defined(STM32F072xB) \
+ || defined(STM32F070xB) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+ /* HSI used as PLL clock source : SystemCoreClock = HSI/PREDIV * PLLMUL */
+ SystemCoreClock = (HSI_VALUE/predivfactor) * pllmull;
+#else
+ /* HSI used as PLL clock source : SystemCoreClock = HSI/2 * PLLMUL */
+ SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
+#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 ||
+ STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB ||
+ STM32F091xC || STM32F098xx || STM32F030xC */
+ }
+ break;
+ default: /* HSI used as system clock */
+ SystemCoreClock = HSI_VALUE;
+ break;
+ }
+ /* Compute HCLK clock frequency ----------------*/
+ /* Get HCLK prescaler */
+ tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+ /* HCLK clock frequency */
+ SystemCoreClock >>= tmp;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
|