diff options
Diffstat (limited to 'fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h')
| -rw-r--r-- | fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h | 226 |
1 files changed, 226 insertions, 0 deletions
diff --git a/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h new file mode 100644 index 0000000..b709829 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h @@ -0,0 +1,226 @@ +/**
+ ******************************************************************************
+ * @file stm32f0xx.h
+ * @author MCD Application Team
+ * @brief CMSIS STM32F0xx Device Peripheral Access Layer Header File.
+ *
+ * The file is the unique include file that the application programmer
+ * is using in the C source code, usually in main.c. This file contains:
+ * - Configuration section that allows to select:
+ * - The STM32F0xx device used in the target application
+ * - To use or not the peripheral’s drivers in application code(i.e.
+ * code will be based on direct access to peripheral’s registers
+ * rather than drivers API), this option is controlled by
+ * "#define USE_HAL_DRIVER"
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f0xx
+ * @{
+ */
+
+#ifndef __STM32F0xx_H
+#define __STM32F0xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+ * @{
+ */
+
+/**
+ * @brief STM32 Family
+ */
+#if !defined (STM32F0)
+#define STM32F0
+#endif /* STM32F0 */
+
+/* Uncomment the line below according to the target STM32 device used in your
+ application
+ */
+
+#if !defined (STM32F030x6) && !defined (STM32F030x8) && \
+ !defined (STM32F031x6) && !defined (STM32F038xx) && \
+ !defined (STM32F042x6) && !defined (STM32F048xx) && !defined (STM32F070x6) && \
+ !defined (STM32F051x8) && !defined (STM32F058xx) && \
+ !defined (STM32F071xB) && !defined (STM32F072xB) && !defined (STM32F078xx) && !defined (STM32F070xB) && \
+ !defined (STM32F091xC) && !defined (STM32F098xx) && !defined (STM32F030xC)
+ /* #define STM32F030x6 */ /*!< STM32F030x4, STM32F030x6 Devices (STM32F030xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
+ /* #define STM32F030x8 */ /*!< STM32F030x8 Devices (STM32F030xx microcontrollers where the Flash memory is 64 Kbytes) */
+ /* #define STM32F031x6 */ /*!< STM32F031x4, STM32F031x6 Devices (STM32F031xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
+ /* #define STM32F038xx */ /*!< STM32F038xx Devices (STM32F038xx microcontrollers where the Flash memory is 32 Kbytes) */
+ /* #define STM32F042x6 */ /*!< STM32F042x4, STM32F042x6 Devices (STM32F042xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
+ /* #define STM32F048x6 */ /*!< STM32F048xx Devices (STM32F042xx microcontrollers where the Flash memory is 32 Kbytes) */
+ /* #define STM32F051x8 */ /*!< STM32F051x4, STM32F051x6, STM32F051x8 Devices (STM32F051xx microcontrollers where the Flash memory ranges between 16 and 64 Kbytes) */
+ /* #define STM32F058xx */ /*!< STM32F058xx Devices (STM32F058xx microcontrollers where the Flash memory is 64 Kbytes) */
+ /* #define STM32F070x6 */ /*!< STM32F070x6 Devices (STM32F070x6 microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
+ /* #define STM32F070xB */ /*!< STM32F070xB Devices (STM32F070xB microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */
+ /* #define STM32F071xB */ /*!< STM32F071x8, STM32F071xB Devices (STM32F071xx microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */
+ /* #define STM32F072xB */ /*!< STM32F072x8, STM32F072xB Devices (STM32F072xx microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */
+ /* #define STM32F078xx */ /*!< STM32F078xx Devices (STM32F078xx microcontrollers where the Flash memory is 128 Kbytes) */
+ /* #define STM32F030xC */ /*!< STM32F030xC Devices (STM32F030xC microcontrollers where the Flash memory is 256 Kbytes) */
+ /* #define STM32F091xC */ /*!< STM32F091xB, STM32F091xC Devices (STM32F091xx microcontrollers where the Flash memory ranges between 128 and 256 Kbytes) */
+ /* #define STM32F098xx */ /*!< STM32F098xx Devices (STM32F098xx microcontrollers where the Flash memory is 256 Kbytes) */
+#endif
+
+/* Tip: To avoid modifying this file each time you need to switch between these
+ devices, you can define the device in your toolchain compiler preprocessor.
+ */
+#if !defined (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+ In this case, these drivers will not be included and the application code will
+ be based on direct access to peripherals registers
+ */
+ /*#define USE_HAL_DRIVER */
+#endif /* USE_HAL_DRIVER */
+
+/**
+ * @brief CMSIS Device version number V2.3.4
+ */
+#define __STM32F0_DEVICE_VERSION_MAIN (0x02) /*!< [31:24] main version */
+#define __STM32F0_DEVICE_VERSION_SUB1 (0x03) /*!< [23:16] sub1 version */
+#define __STM32F0_DEVICE_VERSION_SUB2 (0x04) /*!< [15:8] sub2 version */
+#define __STM32F0_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */
+#define __STM32F0_DEVICE_VERSION ((__STM32F0_DEVICE_VERSION_MAIN << 24)\
+ |(__STM32F0_DEVICE_VERSION_SUB1 << 16)\
+ |(__STM32F0_DEVICE_VERSION_SUB2 << 8 )\
+ |(__STM32F0_DEVICE_VERSION_RC))
+
+/**
+ * @}
+ */
+
+/** @addtogroup Device_Included
+ * @{
+ */
+
+#if defined(STM32F030x6)
+ #include "stm32f030x6.h"
+#elif defined(STM32F030x8)
+ #include "stm32f030x8.h"
+#elif defined(STM32F031x6)
+ #include "stm32f031x6.h"
+#elif defined(STM32F038xx)
+ #include "stm32f038xx.h"
+#elif defined(STM32F042x6)
+ #include "stm32f042x6.h"
+#elif defined(STM32F048xx)
+ #include "stm32f048xx.h"
+#elif defined(STM32F051x8)
+ #include "stm32f051x8.h"
+#elif defined(STM32F058xx)
+ #include "stm32f058xx.h"
+#elif defined(STM32F070x6)
+ #include "stm32f070x6.h"
+#elif defined(STM32F070xB)
+ #include "stm32f070xb.h"
+#elif defined(STM32F071xB)
+ #include "stm32f071xb.h"
+#elif defined(STM32F072xB)
+ #include "stm32f072xb.h"
+#elif defined(STM32F078xx)
+ #include "stm32f078xx.h"
+#elif defined(STM32F091xC)
+ #include "stm32f091xc.h"
+#elif defined(STM32F098xx)
+ #include "stm32f098xx.h"
+#elif defined(STM32F030xC)
+ #include "stm32f030xc.h"
+#else
+ #error "Please select first the target STM32F0xx device used in your application (in stm32f0xx.h file)"
+#endif
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_types
+ * @{
+ */
+typedef enum
+{
+ RESET = 0U,
+ SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+ DISABLE = 0U,
+ ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+ SUCCESS = 0U,
+ ERROR = !SUCCESS
+} ErrorStatus;
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macros
+ * @{
+ */
+#define SET_BIT(REG, BIT) ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT) ((REG) & (BIT))
+
+#define CLEAR_REG(REG) ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL) ((REG) = (VAL))
+
+#define READ_REG(REG) ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+
+/**
+ * @}
+ */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32f0xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F0xx_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|