diff options
Diffstat (limited to 'fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_usb.c')
| -rw-r--r-- | fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_usb.c | 878 |
1 files changed, 0 insertions, 878 deletions
diff --git a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_usb.c b/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_usb.c deleted file mode 100644 index 071ebdc..0000000 --- a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_usb.c +++ /dev/null @@ -1,878 +0,0 @@ -/**
- ******************************************************************************
- * @file stm32f0xx_ll_usb.c
- * @author MCD Application Team
- * @brief USB Low Layer HAL module driver.
- *
- * This file provides firmware functions to manage the following
- * functionalities of the USB Peripheral Controller:
- * + Initialization/de-initialization functions
- * + I/O operation functions
- * + Peripheral Control functions
- * + Peripheral State functions
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- (#) Fill parameters of Init structure in USB_OTG_CfgTypeDef structure.
-
- (#) Call USB_CoreInit() API to initialize the USB Core peripheral.
-
- (#) The upper HAL HCD/PCD driver will call the right routines for its internal processes.
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_hal.h"
-
-/** @addtogroup STM32F0xx_LL_USB_DRIVER
- * @{
- */
-
-#if defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED)
-#if defined (USB)
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-
-/**
- * @brief Initializes the USB Core
- * @param USBx: USB Instance
- * @param cfg : pointer to a USB_CfgTypeDef structure that contains
- * the configuration information for the specified USBx peripheral.
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_CoreInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(USBx);
- UNUSED(cfg);
-
- /* NOTE : - This function is not required by USB Device FS peripheral, it is used
- only by USB OTG FS peripheral.
- - This function is added to ensure compatibility across platforms.
- */
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_EnableGlobalInt
- * Enables the controller's Global Int in the AHB Config reg
- * @param USBx : Selected device
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_EnableGlobalInt(USB_TypeDef *USBx)
-{
- uint16_t winterruptmask;
-
- /* Set winterruptmask variable */
- winterruptmask = USB_CNTR_CTRM | USB_CNTR_WKUPM |
- USB_CNTR_SUSPM | USB_CNTR_ERRM |
- USB_CNTR_SOFM | USB_CNTR_ESOFM |
- USB_CNTR_RESETM | USB_CNTR_L1REQM;
-
- /* Set interrupt mask */
- USBx->CNTR |= winterruptmask;
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_DisableGlobalInt
- * Disable the controller's Global Int in the AHB Config reg
- * @param USBx : Selected device
- * @retval HAL status
-*/
-HAL_StatusTypeDef USB_DisableGlobalInt(USB_TypeDef *USBx)
-{
- uint16_t winterruptmask;
-
- /* Set winterruptmask variable */
- winterruptmask = USB_CNTR_CTRM | USB_CNTR_WKUPM |
- USB_CNTR_SUSPM | USB_CNTR_ERRM |
- USB_CNTR_SOFM | USB_CNTR_ESOFM |
- USB_CNTR_RESETM | USB_CNTR_L1REQM;
-
- /* Clear interrupt mask */
- USBx->CNTR &= ~winterruptmask;
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_SetCurrentMode : Set functional mode
- * @param USBx : Selected device
- * @param mode : current core mode
- * This parameter can be one of the these values:
- * @arg USB_DEVICE_MODE: Peripheral mode mode
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_SetCurrentMode(USB_TypeDef *USBx, USB_ModeTypeDef mode)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(USBx);
- UNUSED(mode);
-
- /* NOTE : - This function is not required by USB Device FS peripheral, it is used
- only by USB OTG FS peripheral.
- - This function is added to ensure compatibility across platforms.
- */
- return HAL_OK;
-}
-
-/**
- * @brief USB_DevInit : Initializes the USB controller registers
- * for device mode
- * @param USBx : Selected device
- * @param cfg : pointer to a USB_CfgTypeDef structure that contains
- * the configuration information for the specified USBx peripheral.
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_DevInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(cfg);
-
- /* Init Device */
- /*CNTR_FRES = 1*/
- USBx->CNTR = USB_CNTR_FRES;
-
- /*CNTR_FRES = 0*/
- USBx->CNTR = 0;
-
- /*Clear pending interrupts*/
- USBx->ISTR = 0;
-
- /*Set Btable Address*/
- USBx->BTABLE = BTABLE_ADDRESS;
-
- /* Enable USB Device Interrupt mask */
- (void)USB_EnableGlobalInt(USBx);
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_SetDevSpeed :Initializes the device speed
- * depending on the PHY type and the enumeration speed of the device.
- * @param USBx Selected device
- * @param speed device speed
- * @retval Hal status
- */
-HAL_StatusTypeDef USB_SetDevSpeed(USB_TypeDef *USBx, uint8_t speed)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(USBx);
- UNUSED(speed);
-
- /* NOTE : - This function is not required by USB Device FS peripheral, it is used
- only by USB OTG FS peripheral.
- - This function is added to ensure compatibility across platforms.
- */
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_FlushTxFifo : Flush a Tx FIFO
- * @param USBx : Selected device
- * @param num : FIFO number
- * This parameter can be a value from 1 to 15
- 15 means Flush all Tx FIFOs
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_FlushTxFifo(USB_TypeDef *USBx, uint32_t num)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(USBx);
- UNUSED(num);
-
- /* NOTE : - This function is not required by USB Device FS peripheral, it is used
- only by USB OTG FS peripheral.
- - This function is added to ensure compatibility across platforms.
- */
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_FlushRxFifo : Flush Rx FIFO
- * @param USBx : Selected device
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_FlushRxFifo(USB_TypeDef *USBx)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(USBx);
-
- /* NOTE : - This function is not required by USB Device FS peripheral, it is used
- only by USB OTG FS peripheral.
- - This function is added to ensure compatibility across platforms.
- */
-
- return HAL_OK;
-}
-
-/**
- * @brief Activate and configure an endpoint
- * @param USBx : Selected device
- * @param ep: pointer to endpoint structure
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep)
-{
- HAL_StatusTypeDef ret = HAL_OK;
- uint16_t wEpRegVal;
-
- wEpRegVal = PCD_GET_ENDPOINT(USBx, ep->num) & USB_EP_T_MASK;
-
- /* initialize Endpoint */
- switch (ep->type)
- {
- case EP_TYPE_CTRL:
- wEpRegVal |= USB_EP_CONTROL;
- break;
-
- case EP_TYPE_BULK:
- wEpRegVal |= USB_EP_BULK;
- break;
-
- case EP_TYPE_INTR:
- wEpRegVal |= USB_EP_INTERRUPT;
- break;
-
- case EP_TYPE_ISOC:
- wEpRegVal |= USB_EP_ISOCHRONOUS;
- break;
-
- default:
- ret = HAL_ERROR;
- break;
- }
-
- PCD_SET_ENDPOINT(USBx, ep->num, wEpRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX);
-
- PCD_SET_EP_ADDRESS(USBx, ep->num, ep->num);
-
- if (ep->doublebuffer == 0U)
- {
- if (ep->is_in != 0U)
- {
- /*Set the endpoint Transmit buffer address */
- PCD_SET_EP_TX_ADDRESS(USBx, ep->num, ep->pmaadress);
- PCD_CLEAR_TX_DTOG(USBx, ep->num);
-
- if (ep->type != EP_TYPE_ISOC)
- {
- /* Configure NAK status for the Endpoint */
- PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_NAK);
- }
- else
- {
- /* Configure TX Endpoint to disabled state */
- PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS);
- }
- }
- else
- {
- /*Set the endpoint Receive buffer address */
- PCD_SET_EP_RX_ADDRESS(USBx, ep->num, ep->pmaadress);
- /*Set the endpoint Receive buffer counter*/
- PCD_SET_EP_RX_CNT(USBx, ep->num, ep->maxpacket);
- PCD_CLEAR_RX_DTOG(USBx, ep->num);
- /* Configure VALID status for the Endpoint*/
- PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID);
- }
- }
- /*Double Buffer*/
- else
- {
- /* Set the endpoint as double buffered */
- PCD_SET_EP_DBUF(USBx, ep->num);
- /* Set buffer address for double buffered mode */
- PCD_SET_EP_DBUF_ADDR(USBx, ep->num, ep->pmaaddr0, ep->pmaaddr1);
-
- if (ep->is_in == 0U)
- {
- /* Clear the data toggle bits for the endpoint IN/OUT */
- PCD_CLEAR_RX_DTOG(USBx, ep->num);
- PCD_CLEAR_TX_DTOG(USBx, ep->num);
-
- /* Reset value of the data toggle bits for the endpoint out */
- PCD_TX_DTOG(USBx, ep->num);
-
- PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID);
- PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS);
- }
- else
- {
- /* Clear the data toggle bits for the endpoint IN/OUT */
- PCD_CLEAR_RX_DTOG(USBx, ep->num);
- PCD_CLEAR_TX_DTOG(USBx, ep->num);
- PCD_RX_DTOG(USBx, ep->num);
-
- if (ep->type != EP_TYPE_ISOC)
- {
- /* Configure NAK status for the Endpoint */
- PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_NAK);
- }
- else
- {
- /* Configure TX Endpoint to disabled state */
- PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS);
- }
-
- PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS);
- }
- }
-
- return ret;
-}
-
-/**
- * @brief De-activate and de-initialize an endpoint
- * @param USBx : Selected device
- * @param ep: pointer to endpoint structure
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep)
-{
- if (ep->doublebuffer == 0U)
- {
- if (ep->is_in != 0U)
- {
- PCD_CLEAR_TX_DTOG(USBx, ep->num);
- /* Configure DISABLE status for the Endpoint*/
- PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS);
- }
- else
- {
- PCD_CLEAR_RX_DTOG(USBx, ep->num);
- /* Configure DISABLE status for the Endpoint*/
- PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS);
- }
- }
- /*Double Buffer*/
- else
- {
- if (ep->is_in == 0U)
- {
- /* Clear the data toggle bits for the endpoint IN/OUT*/
- PCD_CLEAR_RX_DTOG(USBx, ep->num);
- PCD_CLEAR_TX_DTOG(USBx, ep->num);
-
- /* Reset value of the data toggle bits for the endpoint out*/
- PCD_TX_DTOG(USBx, ep->num);
-
- PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS);
- PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS);
- }
- else
- {
- /* Clear the data toggle bits for the endpoint IN/OUT*/
- PCD_CLEAR_RX_DTOG(USBx, ep->num);
- PCD_CLEAR_TX_DTOG(USBx, ep->num);
- PCD_RX_DTOG(USBx, ep->num);
- /* Configure DISABLE status for the Endpoint*/
- PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS);
- PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS);
- }
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_EPStartXfer : setup and starts a transfer over an EP
- * @param USBx : Selected device
- * @param ep: pointer to endpoint structure
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx, USB_EPTypeDef *ep)
-{
- uint16_t pmabuffer;
- uint32_t len;
-
- /* IN endpoint */
- if (ep->is_in == 1U)
- {
- /*Multi packet transfer*/
- if (ep->xfer_len > ep->maxpacket)
- {
- len = ep->maxpacket;
- ep->xfer_len -= len;
- }
- else
- {
- len = ep->xfer_len;
- ep->xfer_len = 0U;
- }
-
- /* configure and validate Tx endpoint */
- if (ep->doublebuffer == 0U)
- {
- USB_WritePMA(USBx, ep->xfer_buff, ep->pmaadress, (uint16_t)len);
- PCD_SET_EP_TX_CNT(USBx, ep->num, len);
- }
- else
- {
- /* Write the data to the USB endpoint */
- if ((PCD_GET_ENDPOINT(USBx, ep->num) & USB_EP_DTOG_TX) != 0U)
- {
- /* Set the Double buffer counter for pmabuffer1 */
- PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len);
- pmabuffer = ep->pmaaddr1;
- }
- else
- {
- /* Set the Double buffer counter for pmabuffer0 */
- PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len);
- pmabuffer = ep->pmaaddr0;
- }
- USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len);
- PCD_FreeUserBuffer(USBx, ep->num, ep->is_in);
- }
-
- PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_VALID);
- }
- else /* OUT endpoint */
- {
- /* Multi packet transfer*/
- if (ep->xfer_len > ep->maxpacket)
- {
- len = ep->maxpacket;
- ep->xfer_len -= len;
- }
- else
- {
- len = ep->xfer_len;
- ep->xfer_len = 0U;
- }
-
- /* configure and validate Rx endpoint */
- if (ep->doublebuffer == 0U)
- {
- /*Set RX buffer count*/
- PCD_SET_EP_RX_CNT(USBx, ep->num, len);
- }
- else
- {
- /*Set the Double buffer counter*/
- PCD_SET_EP_DBUF_CNT(USBx, ep->num, ep->is_in, len);
- }
-
- PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID);
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_WritePacket : Writes a packet into the Tx FIFO associated
- * with the EP/channel
- * @param USBx : Selected device
- * @param src : pointer to source buffer
- * @param ch_ep_num : endpoint or host channel number
- * @param len : Number of bytes to write
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_WritePacket(USB_TypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(USBx);
- UNUSED(src);
- UNUSED(ch_ep_num);
- UNUSED(len);
- /* NOTE : - This function is not required by USB Device FS peripheral, it is used
- only by USB OTG FS peripheral.
- - This function is added to ensure compatibility across platforms.
- */
- return HAL_OK;
-}
-
-/**
- * @brief USB_ReadPacket : read a packet from the Tx FIFO associated
- * with the EP/channel
- * @param USBx : Selected device
- * @param dest : destination pointer
- * @param len : Number of bytes to read
- * @retval pointer to destination buffer
- */
-void *USB_ReadPacket(USB_TypeDef *USBx, uint8_t *dest, uint16_t len)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(USBx);
- UNUSED(dest);
- UNUSED(len);
- /* NOTE : - This function is not required by USB Device FS peripheral, it is used
- only by USB OTG FS peripheral.
- - This function is added to ensure compatibility across platforms.
- */
- return ((void *)NULL);
-}
-
-/**
- * @brief USB_EPSetStall : set a stall condition over an EP
- * @param USBx : Selected device
- * @param ep: pointer to endpoint structure
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_EPSetStall(USB_TypeDef *USBx, USB_EPTypeDef *ep)
-{
- if (ep->is_in != 0U)
- {
- PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_STALL);
- }
- else
- {
- PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_STALL);
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_EPClearStall : Clear a stall condition over an EP
- * @param USBx : Selected device
- * @param ep: pointer to endpoint structure
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_EPClearStall(USB_TypeDef *USBx, USB_EPTypeDef *ep)
-{
- if (ep->doublebuffer == 0U)
- {
- if (ep->is_in != 0U)
- {
- PCD_CLEAR_TX_DTOG(USBx, ep->num);
-
- if (ep->type != EP_TYPE_ISOC)
- {
- /* Configure NAK status for the Endpoint */
- PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_NAK);
- }
- }
- else
- {
- PCD_CLEAR_RX_DTOG(USBx, ep->num);
-
- /* Configure VALID status for the Endpoint*/
- PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID);
- }
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_StopDevice : Stop the usb device mode
- * @param USBx : Selected device
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_StopDevice(USB_TypeDef *USBx)
-{
- /* disable all interrupts and force USB reset */
- USBx->CNTR = USB_CNTR_FRES;
-
- /* clear interrupt status register */
- USBx->ISTR = 0;
-
- /* switch-off device */
- USBx->CNTR = (USB_CNTR_FRES | USB_CNTR_PDWN);
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_SetDevAddress : Stop the usb device mode
- * @param USBx : Selected device
- * @param address : new device address to be assigned
- * This parameter can be a value from 0 to 255
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_SetDevAddress(USB_TypeDef *USBx, uint8_t address)
-{
- if (address == 0U)
- {
- /* set device address and enable function */
- USBx->DADDR = USB_DADDR_EF;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_DevConnect : Connect the USB device by enabling the pull-up/pull-down
- * @param USBx : Selected device
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_DevConnect(USB_TypeDef *USBx)
-{
- /* Enabling DP Pull-UP bit to Connect internal PU resistor on USB DP line */
- USBx->BCDR |= USB_BCDR_DPPU;
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_DevDisconnect : Disconnect the USB device by disabling the pull-up/pull-down
- * @param USBx : Selected device
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_DevDisconnect(USB_TypeDef *USBx)
-{
- /* Disable DP Pull-Up bit to disconnect the Internal PU resistor on USB DP line */
- USBx->BCDR &= (uint16_t)(~(USB_BCDR_DPPU));
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_ReadInterrupts: return the global USB interrupt status
- * @param USBx : Selected device
- * @retval HAL status
- */
-uint32_t USB_ReadInterrupts(USB_TypeDef *USBx)
-{
- uint32_t tmpreg;
-
- tmpreg = USBx->ISTR;
- return tmpreg;
-}
-
-/**
- * @brief USB_ReadDevAllOutEpInterrupt: return the USB device OUT endpoints interrupt status
- * @param USBx : Selected device
- * @retval HAL status
- */
-uint32_t USB_ReadDevAllOutEpInterrupt(USB_TypeDef *USBx)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(USBx);
- /* NOTE : - This function is not required by USB Device FS peripheral, it is used
- only by USB OTG FS peripheral.
- - This function is added to ensure compatibility across platforms.
- */
- return (0);
-}
-
-/**
- * @brief USB_ReadDevAllInEpInterrupt: return the USB device IN endpoints interrupt status
- * @param USBx : Selected device
- * @retval HAL status
- */
-uint32_t USB_ReadDevAllInEpInterrupt(USB_TypeDef *USBx)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(USBx);
- /* NOTE : - This function is not required by USB Device FS peripheral, it is used
- only by USB OTG FS peripheral.
- - This function is added to ensure compatibility across platforms.
- */
- return (0);
-}
-
-/**
- * @brief Returns Device OUT EP Interrupt register
- * @param USBx : Selected device
- * @param epnum : endpoint number
- * This parameter can be a value from 0 to 15
- * @retval Device OUT EP Interrupt register
- */
-uint32_t USB_ReadDevOutEPInterrupt(USB_TypeDef *USBx, uint8_t epnum)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(USBx);
- UNUSED(epnum);
- /* NOTE : - This function is not required by USB Device FS peripheral, it is used
- only by USB OTG FS peripheral.
- - This function is added to ensure compatibility across platforms.
- */
- return (0);
-}
-
-/**
- * @brief Returns Device IN EP Interrupt register
- * @param USBx : Selected device
- * @param epnum : endpoint number
- * This parameter can be a value from 0 to 15
- * @retval Device IN EP Interrupt register
- */
-uint32_t USB_ReadDevInEPInterrupt(USB_TypeDef *USBx, uint8_t epnum)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(USBx);
- UNUSED(epnum);
- /* NOTE : - This function is not required by USB Device FS peripheral, it is used
- only by USB OTG FS peripheral.
- - This function is added to ensure compatibility across platforms.
- */
- return (0);
-}
-
-/**
- * @brief USB_ClearInterrupts: clear a USB interrupt
- * @param USBx Selected device
- * @param interrupt interrupt flag
- * @retval None
- */
-void USB_ClearInterrupts(USB_TypeDef *USBx, uint32_t interrupt)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(USBx);
- UNUSED(interrupt);
- /* NOTE : - This function is not required by USB Device FS peripheral, it is used
- only by USB OTG FS peripheral.
- - This function is added to ensure compatibility across platforms.
- */
-}
-
-/**
- * @brief Prepare the EP0 to start the first control setup
- * @param USBx Selected device
- * @param psetup pointer to setup packet
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_EP0_OutStart(USB_TypeDef *USBx, uint8_t *psetup)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(USBx);
- UNUSED(psetup);
- /* NOTE : - This function is not required by USB Device FS peripheral, it is used
- only by USB OTG FS peripheral.
- - This function is added to ensure compatibility across platforms.
- */
- return HAL_OK;
-}
-
-/**
- * @brief USB_ActivateRemoteWakeup : active remote wakeup signalling
- * @param USBx Selected device
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_TypeDef *USBx)
-{
- USBx->CNTR |= USB_CNTR_RESUME;
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_DeActivateRemoteWakeup : de-active remote wakeup signalling
- * @param USBx Selected device
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_TypeDef *USBx)
-{
- USBx->CNTR &= ~(USB_CNTR_RESUME);
- return HAL_OK;
-}
-
-/**
- * @brief Copy a buffer from user memory area to packet memory area (PMA)
- * @param USBx USB peripheral instance register address.
- * @param pbUsrBuf pointer to user memory area.
- * @param wPMABufAddr address into PMA.
- * @param wNBytes: no. of bytes to be copied.
- * @retval None
- */
-void USB_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes)
-{
- uint32_t n = ((uint32_t)wNBytes + 1U) >> 1;
- uint32_t BaseAddr = (uint32_t)USBx;
- uint32_t i, temp1, temp2;
- __IO uint16_t *pdwVal;
- uint8_t *pBuf = pbUsrBuf;
-
- pdwVal = (__IO uint16_t *)(BaseAddr + 0x400U + ((uint32_t)wPMABufAddr * PMA_ACCESS));
-
- for (i = n; i != 0U; i--)
- {
- temp1 = *pBuf;
- pBuf++;
- temp2 = temp1 | ((uint16_t)((uint16_t) *pBuf << 8));
- *pdwVal = (uint16_t)temp2;
- pdwVal++;
-
-#if PMA_ACCESS > 1U
- pdwVal++;
-#endif
-
- pBuf++;
- }
-}
-
-/**
- * @brief Copy a buffer from user memory area to packet memory area (PMA)
- * @param USBx: USB peripheral instance register address.
- * @param pbUsrBuf pointer to user memory area.
- * @param wPMABufAddr address into PMA.
- * @param wNBytes: no. of bytes to be copied.
- * @retval None
- */
-void USB_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes)
-{
- uint32_t n = (uint32_t)wNBytes >> 1;
- uint32_t BaseAddr = (uint32_t)USBx;
- uint32_t i, temp;
- __IO uint16_t *pdwVal;
- uint8_t *pBuf = pbUsrBuf;
-
- pdwVal = (__IO uint16_t *)(BaseAddr + 0x400U + ((uint32_t)wPMABufAddr * PMA_ACCESS));
-
- for (i = n; i != 0U; i--)
- {
- temp = *(__IO uint16_t *)pdwVal;
- pdwVal++;
- *pBuf = (uint8_t)((temp >> 0) & 0xFFU);
- pBuf++;
- *pBuf = (uint8_t)((temp >> 8) & 0xFFU);
- pBuf++;
-
-#if PMA_ACCESS > 1U
- pdwVal++;
-#endif
- }
-
- if ((wNBytes % 2U) != 0U)
- {
- temp = *pdwVal;
- *pBuf = (uint8_t)((temp >> 0) & 0xFFU);
- }
-}
-
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-#endif /* defined (USB) */
-#endif /* defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|