diff options
Diffstat (limited to 'fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_exti.c')
| -rw-r--r-- | fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_exti.c | 223 |
1 files changed, 0 insertions, 223 deletions
diff --git a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_exti.c b/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_exti.c deleted file mode 100644 index 2832037..0000000 --- a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_exti.c +++ /dev/null @@ -1,223 +0,0 @@ -/**
- ******************************************************************************
- * @file stm32f0xx_ll_exti.c
- * @author MCD Application Team
- * @brief EXTI LL module driver.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-#if defined(USE_FULL_LL_DRIVER)
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_ll_exti.h"
-#ifdef USE_FULL_ASSERT
-#include "stm32_assert.h"
-#else
-#define assert_param(expr) ((void)0U)
-#endif
-
-/** @addtogroup STM32F0xx_LL_Driver
- * @{
- */
-
-#if defined (EXTI)
-
-/** @defgroup EXTI_LL EXTI
- * @{
- */
-
-/* Private types -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private constants ---------------------------------------------------------*/
-/* Private macros ------------------------------------------------------------*/
-/** @addtogroup EXTI_LL_Private_Macros
- * @{
- */
-
-#define IS_LL_EXTI_LINE_0_31(__VALUE__) (((__VALUE__) & ~LL_EXTI_LINE_ALL_0_31) == 0x00000000U)
-
-#define IS_LL_EXTI_MODE(__VALUE__) (((__VALUE__) == LL_EXTI_MODE_IT) \
- || ((__VALUE__) == LL_EXTI_MODE_EVENT) \
- || ((__VALUE__) == LL_EXTI_MODE_IT_EVENT))
-
-
-#define IS_LL_EXTI_TRIGGER(__VALUE__) (((__VALUE__) == LL_EXTI_TRIGGER_NONE) \
- || ((__VALUE__) == LL_EXTI_TRIGGER_RISING) \
- || ((__VALUE__) == LL_EXTI_TRIGGER_FALLING) \
- || ((__VALUE__) == LL_EXTI_TRIGGER_RISING_FALLING))
-
-/**
- * @}
- */
-
-/* Private function prototypes -----------------------------------------------*/
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup EXTI_LL_Exported_Functions
- * @{
- */
-
-/** @addtogroup EXTI_LL_EF_Init
- * @{
- */
-
-/**
- * @brief De-initialize the EXTI registers to their default reset values.
- * @retval An ErrorStatus enumeration value:
- * - SUCCESS: EXTI registers are de-initialized
- * - ERROR: not applicable
- */
-uint32_t LL_EXTI_DeInit(void)
-{
- /* Interrupt mask register set to default reset values */
-#if defined(STM32F030x6) || defined(STM32F031x6) ||defined(STM32F038xx)
- LL_EXTI_WriteReg(IMR, 0x0FF40000U);
-#elif defined(STM32F070x6) || defined(STM32F042x6) || defined(STM32F048xx)
- LL_EXTI_WriteReg(IMR, 0x7FF40000U);
-#elif defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
- LL_EXTI_WriteReg(IMR, 0x0F940000U);
-#else
- LL_EXTI_WriteReg(IMR, 0x7F840000U);
-#endif
- /* Event mask register set to default reset values */
- LL_EXTI_WriteReg(EMR, 0x00000000U);
- /* Rising Trigger selection register set to default reset values */
- LL_EXTI_WriteReg(RTSR, 0x00000000U);
- /* Falling Trigger selection register set to default reset values */
- LL_EXTI_WriteReg(FTSR, 0x00000000U);
- /* Software interrupt event register set to default reset values */
- LL_EXTI_WriteReg(SWIER, 0x00000000U);
- /* Pending register clear */
- LL_EXTI_WriteReg(PR, 0x007BFFFFU);
-
- return SUCCESS;
-}
-
-/**
- * @brief Initialize the EXTI registers according to the specified parameters in EXTI_InitStruct.
- * @param EXTI_InitStruct pointer to a @ref LL_EXTI_InitTypeDef structure.
- * @retval An ErrorStatus enumeration value:
- * - SUCCESS: EXTI registers are initialized
- * - ERROR: not applicable
- */
-uint32_t LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct)
-{
- ErrorStatus status = SUCCESS;
- /* Check the parameters */
- assert_param(IS_LL_EXTI_LINE_0_31(EXTI_InitStruct->Line_0_31));
- assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->LineCommand));
- assert_param(IS_LL_EXTI_MODE(EXTI_InitStruct->Mode));
-
- /* ENABLE LineCommand */
- if (EXTI_InitStruct->LineCommand != DISABLE)
- {
- assert_param(IS_LL_EXTI_TRIGGER(EXTI_InitStruct->Trigger));
-
- /* Configure EXTI Lines in range from 0 to 31 */
- if (EXTI_InitStruct->Line_0_31 != LL_EXTI_LINE_NONE)
- {
- switch (EXTI_InitStruct->Mode)
- {
- case LL_EXTI_MODE_IT:
- /* First Disable Event on provided Lines */
- LL_EXTI_DisableEvent_0_31(EXTI_InitStruct->Line_0_31);
- /* Then Enable IT on provided Lines */
- LL_EXTI_EnableIT_0_31(EXTI_InitStruct->Line_0_31);
- break;
- case LL_EXTI_MODE_EVENT:
- /* First Disable IT on provided Lines */
- LL_EXTI_DisableIT_0_31(EXTI_InitStruct->Line_0_31);
- /* Then Enable Event on provided Lines */
- LL_EXTI_EnableEvent_0_31(EXTI_InitStruct->Line_0_31);
- break;
- case LL_EXTI_MODE_IT_EVENT:
- /* Directly Enable IT & Event on provided Lines */
- LL_EXTI_EnableIT_0_31(EXTI_InitStruct->Line_0_31);
- LL_EXTI_EnableEvent_0_31(EXTI_InitStruct->Line_0_31);
- break;
- default:
- status = ERROR;
- break;
- }
- if (EXTI_InitStruct->Trigger != LL_EXTI_TRIGGER_NONE)
- {
- switch (EXTI_InitStruct->Trigger)
- {
- case LL_EXTI_TRIGGER_RISING:
- /* First Disable Falling Trigger on provided Lines */
- LL_EXTI_DisableFallingTrig_0_31(EXTI_InitStruct->Line_0_31);
- /* Then Enable Rising Trigger on provided Lines */
- LL_EXTI_EnableRisingTrig_0_31(EXTI_InitStruct->Line_0_31);
- break;
- case LL_EXTI_TRIGGER_FALLING:
- /* First Disable Rising Trigger on provided Lines */
- LL_EXTI_DisableRisingTrig_0_31(EXTI_InitStruct->Line_0_31);
- /* Then Enable Falling Trigger on provided Lines */
- LL_EXTI_EnableFallingTrig_0_31(EXTI_InitStruct->Line_0_31);
- break;
- case LL_EXTI_TRIGGER_RISING_FALLING:
- LL_EXTI_EnableRisingTrig_0_31(EXTI_InitStruct->Line_0_31);
- LL_EXTI_EnableFallingTrig_0_31(EXTI_InitStruct->Line_0_31);
- break;
- default:
- status = ERROR;
- break;
- }
- }
- }
- }
- /* DISABLE LineCommand */
- else
- {
- /* De-configure EXTI Lines in range from 0 to 31 */
- LL_EXTI_DisableIT_0_31(EXTI_InitStruct->Line_0_31);
- LL_EXTI_DisableEvent_0_31(EXTI_InitStruct->Line_0_31);
- }
- return status;
-}
-
-/**
- * @brief Set each @ref LL_EXTI_InitTypeDef field to default value.
- * @param EXTI_InitStruct Pointer to a @ref LL_EXTI_InitTypeDef structure.
- * @retval None
- */
-void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct)
-{
- EXTI_InitStruct->Line_0_31 = LL_EXTI_LINE_NONE;
- EXTI_InitStruct->LineCommand = DISABLE;
- EXTI_InitStruct->Mode = LL_EXTI_MODE_IT;
- EXTI_InitStruct->Trigger = LL_EXTI_TRIGGER_FALLING;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* defined (EXTI) */
-
-/**
- * @}
- */
-
-#endif /* USE_FULL_LL_DRIVER */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|