diff options
Diffstat (limited to 'fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_dma.c')
| -rw-r--r-- | fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_dma.c | 397 |
1 files changed, 0 insertions, 397 deletions
diff --git a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_dma.c b/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_dma.c deleted file mode 100644 index 502d9a0..0000000 --- a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_dma.c +++ /dev/null @@ -1,397 +0,0 @@ -/**
- ******************************************************************************
- * @file stm32f0xx_ll_dma.c
- * @author MCD Application Team
- * @brief DMA LL module driver.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-#if defined(USE_FULL_LL_DRIVER)
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_ll_dma.h"
-#include "stm32f0xx_ll_bus.h"
-#ifdef USE_FULL_ASSERT
-#include "stm32_assert.h"
-#else
-#define assert_param(expr) ((void)0U)
-#endif
-
-/** @addtogroup STM32F0xx_LL_Driver
- * @{
- */
-
-#if defined (DMA1) || defined (DMA2)
-
-/** @defgroup DMA_LL DMA
- * @{
- */
-
-/* Private types -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private constants ---------------------------------------------------------*/
-/* Private macros ------------------------------------------------------------*/
-/** @addtogroup DMA_LL_Private_Macros
- * @{
- */
-#define IS_LL_DMA_DIRECTION(__VALUE__) (((__VALUE__) == LL_DMA_DIRECTION_PERIPH_TO_MEMORY) || \
- ((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) || \
- ((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_MEMORY))
-
-#define IS_LL_DMA_MODE(__VALUE__) (((__VALUE__) == LL_DMA_MODE_NORMAL) || \
- ((__VALUE__) == LL_DMA_MODE_CIRCULAR))
-
-#define IS_LL_DMA_PERIPHINCMODE(__VALUE__) (((__VALUE__) == LL_DMA_PERIPH_INCREMENT) || \
- ((__VALUE__) == LL_DMA_PERIPH_NOINCREMENT))
-
-#define IS_LL_DMA_MEMORYINCMODE(__VALUE__) (((__VALUE__) == LL_DMA_MEMORY_INCREMENT) || \
- ((__VALUE__) == LL_DMA_MEMORY_NOINCREMENT))
-
-#define IS_LL_DMA_PERIPHDATASIZE(__VALUE__) (((__VALUE__) == LL_DMA_PDATAALIGN_BYTE) || \
- ((__VALUE__) == LL_DMA_PDATAALIGN_HALFWORD) || \
- ((__VALUE__) == LL_DMA_PDATAALIGN_WORD))
-
-#define IS_LL_DMA_MEMORYDATASIZE(__VALUE__) (((__VALUE__) == LL_DMA_MDATAALIGN_BYTE) || \
- ((__VALUE__) == LL_DMA_MDATAALIGN_HALFWORD) || \
- ((__VALUE__) == LL_DMA_MDATAALIGN_WORD))
-
-#define IS_LL_DMA_NBDATA(__VALUE__) ((__VALUE__) <= 0x0000FFFFU)
-
-#if (defined(DMA1_CSELR_DEFAULT)||defined(DMA2_CSELR_DEFAULT))
-#define IS_LL_DMA_PERIPHREQUEST(__VALUE__) (((__VALUE__) == LL_DMA_REQUEST_0) || \
- ((__VALUE__) == LL_DMA_REQUEST_1) || \
- ((__VALUE__) == LL_DMA_REQUEST_2) || \
- ((__VALUE__) == LL_DMA_REQUEST_3) || \
- ((__VALUE__) == LL_DMA_REQUEST_4) || \
- ((__VALUE__) == LL_DMA_REQUEST_5) || \
- ((__VALUE__) == LL_DMA_REQUEST_6) || \
- ((__VALUE__) == LL_DMA_REQUEST_7) || \
- ((__VALUE__) == LL_DMA_REQUEST_8) || \
- ((__VALUE__) == LL_DMA_REQUEST_9) || \
- ((__VALUE__) == LL_DMA_REQUEST_10) || \
- ((__VALUE__) == LL_DMA_REQUEST_11) || \
- ((__VALUE__) == LL_DMA_REQUEST_12) || \
- ((__VALUE__) == LL_DMA_REQUEST_13) || \
- ((__VALUE__) == LL_DMA_REQUEST_14) || \
- ((__VALUE__) == LL_DMA_REQUEST_15))
-#endif
-
-#define IS_LL_DMA_PRIORITY(__VALUE__) (((__VALUE__) == LL_DMA_PRIORITY_LOW) || \
- ((__VALUE__) == LL_DMA_PRIORITY_MEDIUM) || \
- ((__VALUE__) == LL_DMA_PRIORITY_HIGH) || \
- ((__VALUE__) == LL_DMA_PRIORITY_VERYHIGH))
-
-#if defined (DMA2)
-#if defined (DMA2_Channel6) && defined (DMA2_Channel7)
-#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \
- (((CHANNEL) == LL_DMA_CHANNEL_1) || \
- ((CHANNEL) == LL_DMA_CHANNEL_2) || \
- ((CHANNEL) == LL_DMA_CHANNEL_3) || \
- ((CHANNEL) == LL_DMA_CHANNEL_4) || \
- ((CHANNEL) == LL_DMA_CHANNEL_5) || \
- ((CHANNEL) == LL_DMA_CHANNEL_6) || \
- ((CHANNEL) == LL_DMA_CHANNEL_7))) || \
- (((INSTANCE) == DMA2) && \
- (((CHANNEL) == LL_DMA_CHANNEL_1) || \
- ((CHANNEL) == LL_DMA_CHANNEL_2) || \
- ((CHANNEL) == LL_DMA_CHANNEL_3) || \
- ((CHANNEL) == LL_DMA_CHANNEL_4) || \
- ((CHANNEL) == LL_DMA_CHANNEL_5) || \
- ((CHANNEL) == LL_DMA_CHANNEL_6) || \
- ((CHANNEL) == LL_DMA_CHANNEL_7))))
-#else
-#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \
- (((CHANNEL) == LL_DMA_CHANNEL_1) || \
- ((CHANNEL) == LL_DMA_CHANNEL_2) || \
- ((CHANNEL) == LL_DMA_CHANNEL_3) || \
- ((CHANNEL) == LL_DMA_CHANNEL_4) || \
- ((CHANNEL) == LL_DMA_CHANNEL_5) || \
- ((CHANNEL) == LL_DMA_CHANNEL_6) || \
- ((CHANNEL) == LL_DMA_CHANNEL_7))) || \
- (((INSTANCE) == DMA2) && \
- (((CHANNEL) == LL_DMA_CHANNEL_1) || \
- ((CHANNEL) == LL_DMA_CHANNEL_2) || \
- ((CHANNEL) == LL_DMA_CHANNEL_3) || \
- ((CHANNEL) == LL_DMA_CHANNEL_4) || \
- ((CHANNEL) == LL_DMA_CHANNEL_5))))
-#endif
-#else
-#if defined(DMA1_Channel6) && defined(DMA1_Channel7)
-#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \
- (((CHANNEL) == LL_DMA_CHANNEL_1)|| \
- ((CHANNEL) == LL_DMA_CHANNEL_2) || \
- ((CHANNEL) == LL_DMA_CHANNEL_3) || \
- ((CHANNEL) == LL_DMA_CHANNEL_4) || \
- ((CHANNEL) == LL_DMA_CHANNEL_5) || \
- ((CHANNEL) == LL_DMA_CHANNEL_6) || \
- ((CHANNEL) == LL_DMA_CHANNEL_7))))
-#elif defined (DMA1_Channel6)
-#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \
- (((CHANNEL) == LL_DMA_CHANNEL_1)|| \
- ((CHANNEL) == LL_DMA_CHANNEL_2) || \
- ((CHANNEL) == LL_DMA_CHANNEL_3) || \
- ((CHANNEL) == LL_DMA_CHANNEL_4) || \
- ((CHANNEL) == LL_DMA_CHANNEL_5) || \
- ((CHANNEL) == LL_DMA_CHANNEL_6))))
-#else
-#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \
- (((CHANNEL) == LL_DMA_CHANNEL_1)|| \
- ((CHANNEL) == LL_DMA_CHANNEL_2) || \
- ((CHANNEL) == LL_DMA_CHANNEL_3) || \
- ((CHANNEL) == LL_DMA_CHANNEL_4) || \
- ((CHANNEL) == LL_DMA_CHANNEL_5))))
-#endif /* DMA1_Channel6 && DMA1_Channel7 */
-#endif
-/**
- * @}
- */
-
-/* Private function prototypes -----------------------------------------------*/
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup DMA_LL_Exported_Functions
- * @{
- */
-
-/** @addtogroup DMA_LL_EF_Init
- * @{
- */
-
-/**
- * @brief De-initialize the DMA registers to their default reset values.
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6 (*)
- * @arg @ref LL_DMA_CHANNEL_7 (*)
- *
- * (*) value not defined in all devices
- * @retval An ErrorStatus enumeration value:
- * - SUCCESS: DMA registers are de-initialized
- * - ERROR: DMA registers are not de-initialized
- */
-uint32_t LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Channel)
-{
- DMA_Channel_TypeDef *tmp = (DMA_Channel_TypeDef *)DMA1_Channel1;
- ErrorStatus status = SUCCESS;
-
- /* Check the DMA Instance DMAx and Channel parameters*/
- assert_param(IS_LL_DMA_ALL_CHANNEL_INSTANCE(DMAx, Channel));
-
- tmp = (DMA_Channel_TypeDef *)(__LL_DMA_GET_CHANNEL_INSTANCE(DMAx, Channel));
-
- /* Disable the selected DMAx_Channely */
- CLEAR_BIT(tmp->CCR, DMA_CCR_EN);
-
- /* Reset DMAx_Channely control register */
- LL_DMA_WriteReg(tmp, CCR, 0U);
-
- /* Reset DMAx_Channely remaining bytes register */
- LL_DMA_WriteReg(tmp, CNDTR, 0U);
-
- /* Reset DMAx_Channely peripheral address register */
- LL_DMA_WriteReg(tmp, CPAR, 0U);
-
- /* Reset DMAx_Channely memory address register */
- LL_DMA_WriteReg(tmp, CMAR, 0U);
-
-#if (defined(DMA1_CSELR_DEFAULT)||defined(DMA2_CSELR_DEFAULT))
- /* Reset Request register field for DMAx Channel */
- LL_DMA_SetPeriphRequest(DMAx, Channel, LL_DMA_REQUEST_0);
-#endif
-
- if (Channel == LL_DMA_CHANNEL_1)
- {
- /* Reset interrupt pending bits for DMAx Channel1 */
- LL_DMA_ClearFlag_GI1(DMAx);
- }
- else if (Channel == LL_DMA_CHANNEL_2)
- {
- /* Reset interrupt pending bits for DMAx Channel2 */
- LL_DMA_ClearFlag_GI2(DMAx);
- }
- else if (Channel == LL_DMA_CHANNEL_3)
- {
- /* Reset interrupt pending bits for DMAx Channel3 */
- LL_DMA_ClearFlag_GI3(DMAx);
- }
- else if (Channel == LL_DMA_CHANNEL_4)
- {
- /* Reset interrupt pending bits for DMAx Channel4 */
- LL_DMA_ClearFlag_GI4(DMAx);
- }
- else if (Channel == LL_DMA_CHANNEL_5)
- {
- /* Reset interrupt pending bits for DMAx Channel5 */
- LL_DMA_ClearFlag_GI5(DMAx);
- }
-
-#if defined(DMA1_Channel6)
- else if (Channel == LL_DMA_CHANNEL_6)
- {
- /* Reset interrupt pending bits for DMAx Channel6 */
- LL_DMA_ClearFlag_GI6(DMAx);
- }
-#endif
-#if defined(DMA1_Channel7)
- else if (Channel == LL_DMA_CHANNEL_7)
- {
- /* Reset interrupt pending bits for DMAx Channel7 */
- LL_DMA_ClearFlag_GI7(DMAx);
- }
-#endif
- else
- {
- status = ERROR;
- }
-
- return status;
-}
-
-/**
- * @brief Initialize the DMA registers according to the specified parameters in DMA_InitStruct.
- * @note To convert DMAx_Channely Instance to DMAx Instance and Channely, use helper macros :
- * @arg @ref __LL_DMA_GET_INSTANCE
- * @arg @ref __LL_DMA_GET_CHANNEL
- * @param DMAx DMAx Instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_DMA_CHANNEL_1
- * @arg @ref LL_DMA_CHANNEL_2
- * @arg @ref LL_DMA_CHANNEL_3
- * @arg @ref LL_DMA_CHANNEL_4
- * @arg @ref LL_DMA_CHANNEL_5
- * @arg @ref LL_DMA_CHANNEL_6 (*)
- * @arg @ref LL_DMA_CHANNEL_7 (*)
- *
- * (*) value not defined in all devices
- * @param DMA_InitStruct pointer to a @ref LL_DMA_InitTypeDef structure.
- * @retval An ErrorStatus enumeration value:
- * - SUCCESS: DMA registers are initialized
- * - ERROR: Not applicable
- */
-uint32_t LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Channel, LL_DMA_InitTypeDef *DMA_InitStruct)
-{
- /* Check the DMA Instance DMAx and Channel parameters*/
- assert_param(IS_LL_DMA_ALL_CHANNEL_INSTANCE(DMAx, Channel));
-
- /* Check the DMA parameters from DMA_InitStruct */
- assert_param(IS_LL_DMA_DIRECTION(DMA_InitStruct->Direction));
- assert_param(IS_LL_DMA_MODE(DMA_InitStruct->Mode));
- assert_param(IS_LL_DMA_PERIPHINCMODE(DMA_InitStruct->PeriphOrM2MSrcIncMode));
- assert_param(IS_LL_DMA_MEMORYINCMODE(DMA_InitStruct->MemoryOrM2MDstIncMode));
- assert_param(IS_LL_DMA_PERIPHDATASIZE(DMA_InitStruct->PeriphOrM2MSrcDataSize));
- assert_param(IS_LL_DMA_MEMORYDATASIZE(DMA_InitStruct->MemoryOrM2MDstDataSize));
- assert_param(IS_LL_DMA_NBDATA(DMA_InitStruct->NbData));
-#if (defined(DMA1_CSELR_DEFAULT)||defined(DMA2_CSELR_DEFAULT))
- assert_param(IS_LL_DMA_PERIPHREQUEST(DMA_InitStruct->PeriphRequest));
-#endif
- assert_param(IS_LL_DMA_PRIORITY(DMA_InitStruct->Priority));
-
- /*---------------------------- DMAx CCR Configuration ------------------------
- * Configure DMAx_Channely: data transfer direction, data transfer mode,
- * peripheral and memory increment mode,
- * data size alignment and priority level with parameters :
- * - Direction: DMA_CCR_DIR and DMA_CCR_MEM2MEM bits
- * - Mode: DMA_CCR_CIRC bit
- * - PeriphOrM2MSrcIncMode: DMA_CCR_PINC bit
- * - MemoryOrM2MDstIncMode: DMA_CCR_MINC bit
- * - PeriphOrM2MSrcDataSize: DMA_CCR_PSIZE[1:0] bits
- * - MemoryOrM2MDstDataSize: DMA_CCR_MSIZE[1:0] bits
- * - Priority: DMA_CCR_PL[1:0] bits
- */
- LL_DMA_ConfigTransfer(DMAx, Channel, DMA_InitStruct->Direction | \
- DMA_InitStruct->Mode | \
- DMA_InitStruct->PeriphOrM2MSrcIncMode | \
- DMA_InitStruct->MemoryOrM2MDstIncMode | \
- DMA_InitStruct->PeriphOrM2MSrcDataSize | \
- DMA_InitStruct->MemoryOrM2MDstDataSize | \
- DMA_InitStruct->Priority);
-
- /*-------------------------- DMAx CMAR Configuration -------------------------
- * Configure the memory or destination base address with parameter :
- * - MemoryOrM2MDstAddress: DMA_CMAR_MA[31:0] bits
- */
- LL_DMA_SetMemoryAddress(DMAx, Channel, DMA_InitStruct->MemoryOrM2MDstAddress);
-
- /*-------------------------- DMAx CPAR Configuration -------------------------
- * Configure the peripheral or source base address with parameter :
- * - PeriphOrM2MSrcAddress: DMA_CPAR_PA[31:0] bits
- */
- LL_DMA_SetPeriphAddress(DMAx, Channel, DMA_InitStruct->PeriphOrM2MSrcAddress);
-
- /*--------------------------- DMAx CNDTR Configuration -----------------------
- * Configure the peripheral base address with parameter :
- * - NbData: DMA_CNDTR_NDT[15:0] bits
- */
- LL_DMA_SetDataLength(DMAx, Channel, DMA_InitStruct->NbData);
-
-#if (defined(DMA1_CSELR_DEFAULT)||defined(DMA2_CSELR_DEFAULT))
- /*--------------------------- DMAx CSELR Configuration -----------------------
- * Configure the DMA request for DMA instance on Channel x with parameter :
- * - PeriphRequest: DMA_CSELR[31:0] bits
- */
- LL_DMA_SetPeriphRequest(DMAx, Channel, DMA_InitStruct->PeriphRequest);
-#endif
-
- return SUCCESS;
-}
-
-/**
- * @brief Set each @ref LL_DMA_InitTypeDef field to default value.
- * @param DMA_InitStruct Pointer to a @ref LL_DMA_InitTypeDef structure.
- * @retval None
- */
-void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct)
-{
- /* Set DMA_InitStruct fields to default values */
- DMA_InitStruct->PeriphOrM2MSrcAddress = 0x00000000U;
- DMA_InitStruct->MemoryOrM2MDstAddress = 0x00000000U;
- DMA_InitStruct->Direction = LL_DMA_DIRECTION_PERIPH_TO_MEMORY;
- DMA_InitStruct->Mode = LL_DMA_MODE_NORMAL;
- DMA_InitStruct->PeriphOrM2MSrcIncMode = LL_DMA_PERIPH_NOINCREMENT;
- DMA_InitStruct->MemoryOrM2MDstIncMode = LL_DMA_MEMORY_NOINCREMENT;
- DMA_InitStruct->PeriphOrM2MSrcDataSize = LL_DMA_PDATAALIGN_BYTE;
- DMA_InitStruct->MemoryOrM2MDstDataSize = LL_DMA_MDATAALIGN_BYTE;
- DMA_InitStruct->NbData = 0x00000000U;
-#if (defined(DMA1_CSELR_DEFAULT)||defined(DMA2_CSELR_DEFAULT))
- DMA_InitStruct->PeriphRequest = LL_DMA_REQUEST_0;
-#endif
- DMA_InitStruct->Priority = LL_DMA_PRIORITY_LOW;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* DMA1 || DMA2 */
-
-/**
- * @}
- */
-
-#endif /* USE_FULL_LL_DRIVER */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|