diff options
Diffstat (limited to 'fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_comp.c')
| -rw-r--r-- | fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_comp.c | 316 |
1 files changed, 0 insertions, 316 deletions
diff --git a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_comp.c b/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_comp.c deleted file mode 100644 index a108f40..0000000 --- a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_comp.c +++ /dev/null @@ -1,316 +0,0 @@ -/**
- ******************************************************************************
- * @file stm32f0xx_ll_comp.c
- * @author MCD Application Team
- * @brief COMP LL module driver
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-#if defined(USE_FULL_LL_DRIVER)
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_ll_comp.h"
-
-#ifdef USE_FULL_ASSERT
- #include "stm32_assert.h"
-#else
- #define assert_param(expr) ((void)0U)
-#endif
-
-/** @addtogroup STM32F0xx_LL_Driver
- * @{
- */
-
-#if defined (COMP1) || defined (COMP2)
-
-/** @addtogroup COMP_LL COMP
- * @{
- */
-
-/* Private types -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private constants ---------------------------------------------------------*/
-/* Private macros ------------------------------------------------------------*/
-
-/** @addtogroup COMP_LL_Private_Macros
- * @{
- */
-
-/* Check of parameters for configuration of COMP hierarchical scope: */
-/* COMP instance. */
-
-#define IS_LL_COMP_POWER_MODE(__POWER_MODE__) \
- ( ((__POWER_MODE__) == LL_COMP_POWERMODE_HIGHSPEED) \
- || ((__POWER_MODE__) == LL_COMP_POWERMODE_MEDIUMSPEED) \
- || ((__POWER_MODE__) == LL_COMP_POWERMODE_LOWPOWER) \
- || ((__POWER_MODE__) == LL_COMP_POWERMODE_ULTRALOWPOWER) \
- )
-
-/* Note: On this STM32 serie, comparator input plus parameters are */
-/* the different depending on COMP instances. */
-#define IS_LL_COMP_INPUT_PLUS(__COMP_INSTANCE__, __INPUT_PLUS__) \
- (((__COMP_INSTANCE__) == COMP1) \
- ? ( \
- ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO1) \
- || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_DAC1_CH1) \
- ) \
- : \
- ( \
- ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO1) \
- ) \
- )
-
-/* Note: On this STM32 serie, comparator input minus parameters are */
-/* the same on all COMP instances. */
-/* However, comparator instance kept as macro parameter for */
-/* compatibility with other STM32 families. */
-#define IS_LL_COMP_INPUT_MINUS(__COMP_INSTANCE__, __INPUT_MINUS__) \
- ( ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_1_4VREFINT) \
- || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_1_2VREFINT) \
- || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_3_4VREFINT) \
- || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_VREFINT) \
- || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_DAC1_CH1) \
- || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_DAC1_CH2) \
- || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_IO1) \
- )
-
-#define IS_LL_COMP_INPUT_HYSTERESIS(__INPUT_HYSTERESIS__) \
- ( ((__INPUT_HYSTERESIS__) == LL_COMP_HYSTERESIS_NONE) \
- || ((__INPUT_HYSTERESIS__) == LL_COMP_HYSTERESIS_LOW) \
- || ((__INPUT_HYSTERESIS__) == LL_COMP_HYSTERESIS_MEDIUM) \
- || ((__INPUT_HYSTERESIS__) == LL_COMP_HYSTERESIS_HIGH) \
- )
-
-#define IS_LL_COMP_OUTPUT_SELECTION(__OUTPUT_SELECTION__) \
- ( ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_NONE) \
- || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM1_BKIN) \
- || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM1_IC1) \
- || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM1_OCCLR) \
- || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM2_IC4) \
- || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM2_OCCLR) \
- || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM3_IC1) \
- || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM3_OCCLR) \
- )
-
-#define IS_LL_COMP_OUTPUT_POLARITY(__POLARITY__) \
- ( ((__POLARITY__) == LL_COMP_OUTPUTPOL_NONINVERTED) \
- || ((__POLARITY__) == LL_COMP_OUTPUTPOL_INVERTED) \
- )
-
-/**
- * @}
- */
-
-
-/* Private function prototypes -----------------------------------------------*/
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup COMP_LL_Exported_Functions
- * @{
- */
-
-/** @addtogroup COMP_LL_EF_Init
- * @{
- */
-
-/**
- * @brief De-initialize registers of the selected COMP instance
- * to their default reset values.
- * @note If comparator is locked, de-initialization by software is
- * not possible.
- * The only way to unlock the comparator is a device hardware reset.
- * @param COMPx COMP instance
- * @retval An ErrorStatus enumeration value:
- * - SUCCESS: COMP registers are de-initialized
- * - ERROR: COMP registers are not de-initialized
- */
-ErrorStatus LL_COMP_DeInit(COMP_TypeDef *COMPx)
-{
- ErrorStatus status = SUCCESS;
-
- /* Check the parameters */
- assert_param(IS_COMP_ALL_INSTANCE(COMPx));
-
- /* Note: Hardware constraint (refer to description of this function): */
- /* COMP instance must not be locked. */
- if(LL_COMP_IsLocked(COMPx) == 0U)
- {
- /* Note: Connection switch is applicable only to COMP instance COMP1, */
- /* therefore is COMP2 is selected the equivalent bit is */
- /* kept unmodified. */
- if(COMPx == COMP1)
- {
- CLEAR_BIT(COMP->CSR,
- ( COMP_CSR_COMP1MODE
- | COMP_CSR_COMP1INSEL
- | COMP_CSR_COMP1SW1
- | COMP_CSR_COMP1OUTSEL
- | COMP_CSR_COMP1HYST
- | COMP_CSR_COMP1POL
- | COMP_CSR_COMP1EN
- ) << __COMP_BITOFFSET_INSTANCE(COMPx)
- );
- }
- else
- {
- CLEAR_BIT(COMP->CSR,
- ( COMP_CSR_COMP1MODE
- | COMP_CSR_COMP1INSEL
- | COMP_CSR_COMP1OUTSEL
- | COMP_CSR_COMP1HYST
- | COMP_CSR_COMP1POL
- | COMP_CSR_COMP1EN
- ) << __COMP_BITOFFSET_INSTANCE(COMPx)
- );
- }
-
- }
- else
- {
- /* Comparator instance is locked: de-initialization by software is */
- /* not possible. */
- /* The only way to unlock the comparator is a device hardware reset. */
- status = ERROR;
- }
-
- return status;
-}
-
-/**
- * @brief Initialize some features of COMP instance.
- * @note This function configures features of the selected COMP instance.
- * Some features are also available at scope COMP common instance
- * (common to several COMP instances).
- * Refer to functions having argument "COMPxy_COMMON" as parameter.
- * @param COMPx COMP instance
- * @param COMP_InitStruct Pointer to a @ref LL_COMP_InitTypeDef structure
- * @retval An ErrorStatus enumeration value:
- * - SUCCESS: COMP registers are initialized
- * - ERROR: COMP registers are not initialized
- */
-ErrorStatus LL_COMP_Init(COMP_TypeDef *COMPx, LL_COMP_InitTypeDef *COMP_InitStruct)
-{
- ErrorStatus status = SUCCESS;
-
- /* Check the parameters */
- assert_param(IS_COMP_ALL_INSTANCE(COMPx));
- assert_param(IS_LL_COMP_POWER_MODE(COMP_InitStruct->PowerMode));
- assert_param(IS_LL_COMP_INPUT_PLUS(COMPx, COMP_InitStruct->InputPlus));
- assert_param(IS_LL_COMP_INPUT_MINUS(COMPx, COMP_InitStruct->InputMinus));
- assert_param(IS_LL_COMP_INPUT_HYSTERESIS(COMP_InitStruct->InputHysteresis));
- assert_param(IS_LL_COMP_OUTPUT_SELECTION(COMP_InitStruct->OutputSelection));
- assert_param(IS_LL_COMP_OUTPUT_POLARITY(COMP_InitStruct->OutputPolarity));
-
- /* Note: Hardware constraint (refer to description of this function) */
- /* COMP instance must not be locked. */
- if(LL_COMP_IsLocked(COMPx) == 0U)
- {
- /* Configuration of comparator instance : */
- /* - PowerMode */
- /* - InputPlus */
- /* - InputMinus */
- /* - InputHysteresis */
- /* - OutputSelection */
- /* - OutputPolarity */
- /* Note: Connection switch is applicable only to COMP instance COMP1, */
- /* therefore is COMP2 is selected the equivalent bit is */
- /* kept unmodified. */
- if(COMPx == COMP1)
- {
- MODIFY_REG(COMP->CSR,
- ( COMP_CSR_COMP1MODE
- | COMP_CSR_COMP1INSEL
- | COMP_CSR_COMP1SW1
- | COMP_CSR_COMP1OUTSEL
- | COMP_CSR_COMP1HYST
- | COMP_CSR_COMP1POL
- ) << __COMP_BITOFFSET_INSTANCE(COMPx)
- ,
- ( COMP_InitStruct->PowerMode
- | COMP_InitStruct->InputPlus
- | COMP_InitStruct->InputMinus
- | COMP_InitStruct->InputHysteresis
- | COMP_InitStruct->OutputSelection
- | COMP_InitStruct->OutputPolarity
- ) << __COMP_BITOFFSET_INSTANCE(COMPx)
- );
- }
- else
- {
- MODIFY_REG(COMP->CSR,
- ( COMP_CSR_COMP1MODE
- | COMP_CSR_COMP1INSEL
- | COMP_CSR_COMP1OUTSEL
- | COMP_CSR_COMP1HYST
- | COMP_CSR_COMP1POL
- ) << __COMP_BITOFFSET_INSTANCE(COMPx)
- ,
- ( COMP_InitStruct->PowerMode
- | COMP_InitStruct->InputPlus
- | COMP_InitStruct->InputMinus
- | COMP_InitStruct->InputHysteresis
- | COMP_InitStruct->OutputSelection
- | COMP_InitStruct->OutputPolarity
- ) << __COMP_BITOFFSET_INSTANCE(COMPx)
- );
- }
-
- }
- else
- {
- /* Initialization error: COMP instance is locked. */
- status = ERROR;
- }
-
- return status;
-}
-
-/**
- * @brief Set each @ref LL_COMP_InitTypeDef field to default value.
- * @param COMP_InitStruct pointer to a @ref LL_COMP_InitTypeDef structure
- * whose fields will be set to default values.
- * @retval None
- */
-void LL_COMP_StructInit(LL_COMP_InitTypeDef *COMP_InitStruct)
-{
- /* Set COMP_InitStruct fields to default values */
- COMP_InitStruct->PowerMode = LL_COMP_POWERMODE_ULTRALOWPOWER;
- COMP_InitStruct->InputPlus = LL_COMP_INPUT_PLUS_IO1;
- COMP_InitStruct->InputMinus = LL_COMP_INPUT_MINUS_VREFINT;
- COMP_InitStruct->InputHysteresis = LL_COMP_HYSTERESIS_NONE;
- COMP_InitStruct->OutputSelection = LL_COMP_OUTPUT_NONE;
- COMP_InitStruct->OutputPolarity = LL_COMP_OUTPUTPOL_NONINVERTED;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* COMP1 || COMP2 */
-
-/**
- * @}
- */
-
-#endif /* USE_FULL_LL_DRIVER */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|