diff options
Diffstat (limited to 'fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_usart.c')
| -rw-r--r-- | fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_usart.c | 3249 |
1 files changed, 0 insertions, 3249 deletions
diff --git a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_usart.c b/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_usart.c deleted file mode 100644 index d480193..0000000 --- a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_usart.c +++ /dev/null @@ -1,3249 +0,0 @@ -/**
- ******************************************************************************
- * @file stm32f0xx_hal_usart.c
- * @author MCD Application Team
- * @brief USART HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the Universal Synchronous/Asynchronous Receiver Transmitter
- * Peripheral (USART).
- * + Initialization and de-initialization functions
- * + IO operation functions
- * + Peripheral Control functions
- * + Peripheral State and Error functions
- *
- @verbatim
- ===============================================================================
- ##### How to use this driver #####
- ===============================================================================
- [..]
- The USART HAL driver can be used as follows:
-
- (#) Declare a USART_HandleTypeDef handle structure (eg. USART_HandleTypeDef husart).
- (#) Initialize the USART low level resources by implementing the HAL_USART_MspInit() API:
- (++) Enable the USARTx interface clock.
- (++) USART pins configuration:
- (+++) Enable the clock for the USART GPIOs.
- (+++) Configure these USART pins as alternate function pull-up.
- (++) NVIC configuration if you need to use interrupt process (HAL_USART_Transmit_IT(),
- HAL_USART_Receive_IT() and HAL_USART_TransmitReceive_IT() APIs):
- (+++) Configure the USARTx interrupt priority.
- (+++) Enable the NVIC USART IRQ handle.
- (++) USART interrupts handling:
- -@@- The specific USART interrupts (Transmission complete interrupt,
- RXNE interrupt and Error Interrupts) will be managed using the macros
- __HAL_USART_ENABLE_IT() and __HAL_USART_DISABLE_IT() inside the transmit and receive process.
- (++) DMA Configuration if you need to use DMA process (HAL_USART_Transmit_DMA()
- HAL_USART_Receive_DMA() and HAL_USART_TransmitReceive_DMA() APIs):
- (+++) Declare a DMA handle structure for the Tx/Rx channel.
- (+++) Enable the DMAx interface clock.
- (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
- (+++) Configure the DMA Tx/Rx channel.
- (+++) Associate the initialized DMA handle to the USART DMA Tx/Rx handle.
- (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx channel.
-
- (#) Program the Baud Rate, Word Length, Stop Bit, Parity, and Mode
- (Receiver/Transmitter) in the husart handle Init structure.
-
- (#) Initialize the USART registers by calling the HAL_USART_Init() API:
- (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
- by calling the customized HAL_USART_MspInit(&husart) API.
-
- [..]
- (@) To configure and enable/disable the USART to wake up the MCU from stop mode, resort to UART API's
- HAL_UARTEx_StopModeWakeUpSourceConfig(), HAL_UARTEx_EnableStopMode() and
- HAL_UARTEx_DisableStopMode() in casting the USART handle to UART type UART_HandleTypeDef.
-
- ##### Callback registration #####
- ==================================
-
- [..]
- The compilation define USE_HAL_USART_REGISTER_CALLBACKS when set to 1
- allows the user to configure dynamically the driver callbacks.
-
- [..]
- Use Function @ref HAL_USART_RegisterCallback() to register a user callback.
- Function @ref HAL_USART_RegisterCallback() allows to register following callbacks:
- (+) TxHalfCpltCallback : Tx Half Complete Callback.
- (+) TxCpltCallback : Tx Complete Callback.
- (+) RxHalfCpltCallback : Rx Half Complete Callback.
- (+) RxCpltCallback : Rx Complete Callback.
- (+) TxRxCpltCallback : Tx Rx Complete Callback.
- (+) ErrorCallback : Error Callback.
- (+) AbortCpltCallback : Abort Complete Callback.
- (+) MspInitCallback : USART MspInit.
- (+) MspDeInitCallback : USART MspDeInit.
- This function takes as parameters the HAL peripheral handle, the Callback ID
- and a pointer to the user callback function.
-
- [..]
- Use function @ref HAL_USART_UnRegisterCallback() to reset a callback to the default
- weak (surcharged) function.
- @ref HAL_USART_UnRegisterCallback() takes as parameters the HAL peripheral handle,
- and the Callback ID.
- This function allows to reset following callbacks:
- (+) TxHalfCpltCallback : Tx Half Complete Callback.
- (+) TxCpltCallback : Tx Complete Callback.
- (+) RxHalfCpltCallback : Rx Half Complete Callback.
- (+) RxCpltCallback : Rx Complete Callback.
- (+) TxRxCpltCallback : Tx Rx Complete Callback.
- (+) ErrorCallback : Error Callback.
- (+) AbortCpltCallback : Abort Complete Callback.
- (+) MspInitCallback : USART MspInit.
- (+) MspDeInitCallback : USART MspDeInit.
-
- [..]
- By default, after the @ref HAL_USART_Init() and when the state is HAL_USART_STATE_RESET
- all callbacks are set to the corresponding weak (surcharged) functions:
- examples @ref HAL_USART_TxCpltCallback(), @ref HAL_USART_RxHalfCpltCallback().
- Exception done for MspInit and MspDeInit functions that are respectively
- reset to the legacy weak (surcharged) functions in the @ref HAL_USART_Init()
- and @ref HAL_USART_DeInit() only when these callbacks are null (not registered beforehand).
- If not, MspInit or MspDeInit are not null, the @ref HAL_USART_Init() and @ref HAL_USART_DeInit()
- keep and use the user MspInit/MspDeInit callbacks (registered beforehand).
-
- [..]
- Callbacks can be registered/unregistered in HAL_USART_STATE_READY state only.
- Exception done MspInit/MspDeInit that can be registered/unregistered
- in HAL_USART_STATE_READY or HAL_USART_STATE_RESET state, thus registered (user)
- MspInit/DeInit callbacks can be used during the Init/DeInit.
- In that case first register the MspInit/MspDeInit user callbacks
- using @ref HAL_USART_RegisterCallback() before calling @ref HAL_USART_DeInit()
- or @ref HAL_USART_Init() function.
-
- [..]
- When The compilation define USE_HAL_USART_REGISTER_CALLBACKS is set to 0 or
- not defined, the callback registration feature is not available
- and weak (surcharged) callbacks are used.
-
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_hal.h"
-
-/** @addtogroup STM32F0xx_HAL_Driver
- * @{
- */
-
-/** @defgroup USART USART
- * @brief HAL USART Synchronous module driver
- * @{
- */
-
-#ifdef HAL_USART_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/** @defgroup USART_Private_Constants USART Private Constants
- * @{
- */
-#define USART_DUMMY_DATA ((uint16_t) 0xFFFF) /*!< USART transmitted dummy data */
-#define USART_TEACK_REACK_TIMEOUT 1000U /*!< USART TX or RX enable acknowledge time-out value */
-#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | \
- USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8)) /*!< USART CR1 fields of parameters set by USART_SetConfig API */
-#define USART_CR2_FIELDS ((uint32_t)(USART_CR2_CPHA | USART_CR2_CPOL | \
- USART_CR2_CLKEN | USART_CR2_LBCL | USART_CR2_STOP)) /*!< USART CR2 fields of parameters set by USART_SetConfig API */
-
-#define USART_BRR_MIN 0x10U /* USART BRR minimum authorized value */
-#define USART_BRR_MAX 0xFFFFU /* USART BRR maximum authorized value */
-/**
- * @}
- */
-
-/* Private macros ------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/** @addtogroup USART_Private_Functions
- * @{
- */
-#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
-void USART_InitCallbacksToDefault(USART_HandleTypeDef *husart);
-#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
-static void USART_EndTransfer(USART_HandleTypeDef *husart);
-static void USART_DMATransmitCplt(DMA_HandleTypeDef *hdma);
-static void USART_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
-static void USART_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
-static void USART_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
-static void USART_DMAError(DMA_HandleTypeDef *hdma);
-static void USART_DMAAbortOnError(DMA_HandleTypeDef *hdma);
-static void USART_DMATxAbortCallback(DMA_HandleTypeDef *hdma);
-static void USART_DMARxAbortCallback(DMA_HandleTypeDef *hdma);
-static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status,
- uint32_t Tickstart, uint32_t Timeout);
-static HAL_StatusTypeDef USART_SetConfig(USART_HandleTypeDef *husart);
-static HAL_StatusTypeDef USART_CheckIdleState(USART_HandleTypeDef *husart);
-static void USART_TxISR_8BIT(USART_HandleTypeDef *husart);
-static void USART_TxISR_16BIT(USART_HandleTypeDef *husart);
-static void USART_EndTransmit_IT(USART_HandleTypeDef *husart);
-static void USART_RxISR_8BIT(USART_HandleTypeDef *husart);
-static void USART_RxISR_16BIT(USART_HandleTypeDef *husart);
-
-
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-
-/** @defgroup USART_Exported_Functions USART Exported Functions
- * @{
- */
-
-/** @defgroup USART_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ===============================================================================
- ##### Initialization and Configuration functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to initialize the USART
- in asynchronous and in synchronous modes.
- (+) For the asynchronous mode only these parameters can be configured:
- (++) Baud Rate
- (++) Word Length
- (++) Stop Bit
- (++) Parity: If the parity is enabled, then the MSB bit of the data written
- in the data register is transmitted but is changed by the parity bit.
- (++) USART polarity
- (++) USART phase
- (++) USART LastBit
- (++) Receiver/transmitter modes
-
- [..]
- The HAL_USART_Init() function follows the USART synchronous configuration
- procedure (details for the procedure are available in reference manual).
-
-@endverbatim
-
- Depending on the frame length either defined by the M1 and M0 bits (7-bit,
- 8-bit or 9-bit) or by the M bit (8-bits or 9-bits), the possible USART formats
- are listed in the following table.
-
- Table 1. USART frame format.
- +-----------------------------------------------------------------------+
- | M bit | PCE bit | USART frame |
- |-------------------|-----------|---------------------------------------|
- | 0 | 0 | | SB | 8-bit data | STB | |
- |-------------------|-----------|---------------------------------------|
- | 0 | 1 | | SB | 7-bit data | PB | STB | |
- |-------------------|-----------|---------------------------------------|
- | 1 | 0 | | SB | 9-bit data | STB | |
- |-------------------|-----------|---------------------------------------|
- | 1 | 1 | | SB | 8-bit data | PB | STB | |
- +-----------------------------------------------------------------------+
- +-----------------------------------------------------------------------+
- | M1 bit | M0 bit | PCE bit | USART frame |
- |---------|---------|-----------|---------------------------------------|
- | 0 | 0 | 0 | | SB | 8 bit data | STB | |
- |---------|---------|-----------|---------------------------------------|
- | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | |
- |---------|---------|-----------|---------------------------------------|
- | 0 | 1 | 0 | | SB | 9 bit data | STB | |
- |---------|---------|-----------|---------------------------------------|
- | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | |
- |---------|---------|-----------|---------------------------------------|
- | 1 | 0 | 0 | | SB | 7 bit data | STB | |
- |---------|---------|-----------|---------------------------------------|
- | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | |
- +-----------------------------------------------------------------------+
-
- * @{
- */
-
-/**
- * @brief Initialize the USART mode according to the specified
- * parameters in the USART_InitTypeDef and initialize the associated handle.
- * @param husart USART handle.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart)
-{
- /* Check the USART handle allocation */
- if (husart == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_USART_INSTANCE(husart->Instance));
-
- if (husart->State == HAL_USART_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- husart->Lock = HAL_UNLOCKED;
-
-#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
- USART_InitCallbacksToDefault(husart);
-
- if (husart->MspInitCallback == NULL)
- {
- husart->MspInitCallback = HAL_USART_MspInit;
- }
-
- /* Init the low level hardware */
- husart->MspInitCallback(husart);
-#else
- /* Init the low level hardware : GPIO, CLOCK */
- HAL_USART_MspInit(husart);
-#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
- }
-
- husart->State = HAL_USART_STATE_BUSY;
-
- /* Disable the Peripheral */
- __HAL_USART_DISABLE(husart);
-
- /* Set the Usart Communication parameters */
- if (USART_SetConfig(husart) == HAL_ERROR)
- {
- return HAL_ERROR;
- }
-
- /* In Synchronous mode, the following bits must be kept cleared:
- - LINEN bit (if LIN is supported) in the USART_CR2 register
- - SCEN (if Smartcard is supported), HDSEL and IREN (if IrDA is supported) bits in the USART_CR3 register.
- */
-#if defined (USART_CR2_LINEN)
- husart->Instance->CR2 &= ~USART_CR2_LINEN;
-#endif /* USART_CR2_LINEN */
-#if defined (USART_CR3_SCEN)
-#if defined (USART_CR3_IREN)
- husart->Instance->CR3 &= ~(USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN);
-#else
- husart->Instance->CR3 &= ~(USART_CR3_SCEN | USART_CR3_HDSEL);
-#endif /* USART_CR3_IREN */
-#else
-#if defined (USART_CR3_IREN)
- husart->Instance->CR3 &= ~(USART_CR3_HDSEL | USART_CR3_IREN);
-#else
- husart->Instance->CR3 &= ~(USART_CR3_HDSEL);
-#endif /* USART_CR3_IREN */
-#endif /* USART_CR3_SCEN */
-
- /* Enable the Peripheral */
- __HAL_USART_ENABLE(husart);
-
- /* TEACK and/or REACK to check before moving husart->State to Ready */
- return (USART_CheckIdleState(husart));
-}
-
-/**
- * @brief DeInitialize the USART peripheral.
- * @param husart USART handle.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart)
-{
- /* Check the USART handle allocation */
- if (husart == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_USART_INSTANCE(husart->Instance));
-
- husart->State = HAL_USART_STATE_BUSY;
-
- husart->Instance->CR1 = 0x0U;
- husart->Instance->CR2 = 0x0U;
- husart->Instance->CR3 = 0x0U;
-
-#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
- if (husart->MspDeInitCallback == NULL)
- {
- husart->MspDeInitCallback = HAL_USART_MspDeInit;
- }
- /* DeInit the low level hardware */
- husart->MspDeInitCallback(husart);
-#else
- /* DeInit the low level hardware */
- HAL_USART_MspDeInit(husart);
-#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
-
- husart->ErrorCode = HAL_USART_ERROR_NONE;
- husart->State = HAL_USART_STATE_RESET;
-
- /* Process Unlock */
- __HAL_UNLOCK(husart);
-
- return HAL_OK;
-}
-
-/**
- * @brief Initialize the USART MSP.
- * @param husart USART handle.
- * @retval None
- */
-__weak void HAL_USART_MspInit(USART_HandleTypeDef *husart)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(husart);
-
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_USART_MspInit can be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitialize the USART MSP.
- * @param husart USART handle.
- * @retval None
- */
-__weak void HAL_USART_MspDeInit(USART_HandleTypeDef *husart)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(husart);
-
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_USART_MspDeInit can be implemented in the user file
- */
-}
-
-#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
-/**
- * @brief Register a User USART Callback
- * To be used instead of the weak predefined callback
- * @param husart usart handle
- * @param CallbackID ID of the callback to be registered
- * This parameter can be one of the following values:
- * @arg @ref HAL_USART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID
- * @arg @ref HAL_USART_TX_COMPLETE_CB_ID Tx Complete Callback ID
- * @arg @ref HAL_USART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID
- * @arg @ref HAL_USART_RX_COMPLETE_CB_ID Rx Complete Callback ID
- * @arg @ref HAL_USART_TX_RX_COMPLETE_CB_ID Rx Complete Callback ID
- * @arg @ref HAL_USART_ERROR_CB_ID Error Callback ID
- * @arg @ref HAL_USART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID
- * @arg @ref HAL_USART_MSPINIT_CB_ID MspInit Callback ID
- * @arg @ref HAL_USART_MSPDEINIT_CB_ID MspDeInit Callback ID
- * @param pCallback pointer to the Callback function
- * @retval HAL status
-+ */
-HAL_StatusTypeDef HAL_USART_RegisterCallback(USART_HandleTypeDef *husart, HAL_USART_CallbackIDTypeDef CallbackID,
- pUSART_CallbackTypeDef pCallback)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- if (pCallback == NULL)
- {
- /* Update the error code */
- husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK;
-
- return HAL_ERROR;
- }
- /* Process locked */
- __HAL_LOCK(husart);
-
- if (husart->State == HAL_USART_STATE_READY)
- {
- switch (CallbackID)
- {
- case HAL_USART_TX_HALFCOMPLETE_CB_ID :
- husart->TxHalfCpltCallback = pCallback;
- break;
-
- case HAL_USART_TX_COMPLETE_CB_ID :
- husart->TxCpltCallback = pCallback;
- break;
-
- case HAL_USART_RX_HALFCOMPLETE_CB_ID :
- husart->RxHalfCpltCallback = pCallback;
- break;
-
- case HAL_USART_RX_COMPLETE_CB_ID :
- husart->RxCpltCallback = pCallback;
- break;
-
- case HAL_USART_TX_RX_COMPLETE_CB_ID :
- husart->TxRxCpltCallback = pCallback;
- break;
-
- case HAL_USART_ERROR_CB_ID :
- husart->ErrorCallback = pCallback;
- break;
-
- case HAL_USART_ABORT_COMPLETE_CB_ID :
- husart->AbortCpltCallback = pCallback;
- break;
-
-
- case HAL_USART_MSPINIT_CB_ID :
- husart->MspInitCallback = pCallback;
- break;
-
- case HAL_USART_MSPDEINIT_CB_ID :
- husart->MspDeInitCallback = pCallback;
- break;
-
- default :
- /* Update the error code */
- husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK;
-
- /* Return error status */
- status = HAL_ERROR;
- break;
- }
- }
- else if (husart->State == HAL_USART_STATE_RESET)
- {
- switch (CallbackID)
- {
- case HAL_USART_MSPINIT_CB_ID :
- husart->MspInitCallback = pCallback;
- break;
-
- case HAL_USART_MSPDEINIT_CB_ID :
- husart->MspDeInitCallback = pCallback;
- break;
-
- default :
- /* Update the error code */
- husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK;
-
- /* Return error status */
- status = HAL_ERROR;
- break;
- }
- }
- else
- {
- /* Update the error code */
- husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK;
-
- /* Return error status */
- status = HAL_ERROR;
- }
-
- /* Release Lock */
- __HAL_UNLOCK(husart);
-
- return status;
-}
-
-/**
- * @brief Unregister an UART Callback
- * UART callaback is redirected to the weak predefined callback
- * @param husart uart handle
- * @param CallbackID ID of the callback to be unregistered
- * This parameter can be one of the following values:
- * @arg @ref HAL_USART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID
- * @arg @ref HAL_USART_TX_COMPLETE_CB_ID Tx Complete Callback ID
- * @arg @ref HAL_USART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID
- * @arg @ref HAL_USART_RX_COMPLETE_CB_ID Rx Complete Callback ID
- * @arg @ref HAL_USART_TX_RX_COMPLETE_CB_ID Rx Complete Callback ID
- * @arg @ref HAL_USART_ERROR_CB_ID Error Callback ID
- * @arg @ref HAL_USART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID
- * @arg @ref HAL_USART_MSPINIT_CB_ID MspInit Callback ID
- * @arg @ref HAL_USART_MSPDEINIT_CB_ID MspDeInit Callback ID
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_USART_UnRegisterCallback(USART_HandleTypeDef *husart, HAL_USART_CallbackIDTypeDef CallbackID)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- /* Process locked */
- __HAL_LOCK(husart);
-
- if (HAL_USART_STATE_READY == husart->State)
- {
- switch (CallbackID)
- {
- case HAL_USART_TX_HALFCOMPLETE_CB_ID :
- husart->TxHalfCpltCallback = HAL_USART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */
- break;
-
- case HAL_USART_TX_COMPLETE_CB_ID :
- husart->TxCpltCallback = HAL_USART_TxCpltCallback; /* Legacy weak TxCpltCallback */
- break;
-
- case HAL_USART_RX_HALFCOMPLETE_CB_ID :
- husart->RxHalfCpltCallback = HAL_USART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */
- break;
-
- case HAL_USART_RX_COMPLETE_CB_ID :
- husart->RxCpltCallback = HAL_USART_RxCpltCallback; /* Legacy weak RxCpltCallback */
- break;
-
- case HAL_USART_TX_RX_COMPLETE_CB_ID :
- husart->TxRxCpltCallback = HAL_USART_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */
- break;
-
- case HAL_USART_ERROR_CB_ID :
- husart->ErrorCallback = HAL_USART_ErrorCallback; /* Legacy weak ErrorCallback */
- break;
-
- case HAL_USART_ABORT_COMPLETE_CB_ID :
- husart->AbortCpltCallback = HAL_USART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */
- break;
-
-
- case HAL_USART_MSPINIT_CB_ID :
- husart->MspInitCallback = HAL_USART_MspInit; /* Legacy weak MspInitCallback */
- break;
-
- case HAL_USART_MSPDEINIT_CB_ID :
- husart->MspDeInitCallback = HAL_USART_MspDeInit; /* Legacy weak MspDeInitCallback */
- break;
-
- default :
- /* Update the error code */
- husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK;
-
- /* Return error status */
- status = HAL_ERROR;
- break;
- }
- }
- else if (HAL_USART_STATE_RESET == husart->State)
- {
- switch (CallbackID)
- {
- case HAL_USART_MSPINIT_CB_ID :
- husart->MspInitCallback = HAL_USART_MspInit;
- break;
-
- case HAL_USART_MSPDEINIT_CB_ID :
- husart->MspDeInitCallback = HAL_USART_MspDeInit;
- break;
-
- default :
- /* Update the error code */
- husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK;
-
- /* Return error status */
- status = HAL_ERROR;
- break;
- }
- }
- else
- {
- /* Update the error code */
- husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK;
-
- /* Return error status */
- status = HAL_ERROR;
- }
-
- /* Release Lock */
- __HAL_UNLOCK(husart);
-
- return status;
-}
-#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
-
-
-/**
- * @}
- */
-
-/** @defgroup USART_Exported_Functions_Group2 IO operation functions
- * @brief USART Transmit and Receive functions
- *
-@verbatim
- ===============================================================================
- ##### IO operation functions #####
- ===============================================================================
- [..] This subsection provides a set of functions allowing to manage the USART synchronous
- data transfers.
-
- [..] The USART supports master mode only: it cannot receive or send data related to an input
- clock (SCLK is always an output).
-
- [..]
-
- (#) There are two modes of transfer:
- (++) Blocking mode: The communication is performed in polling mode.
- The HAL status of all data processing is returned by the same function
- after finishing transfer.
- (++) No-Blocking mode: The communication is performed using Interrupts
- or DMA, These API's return the HAL status.
- The end of the data processing will be indicated through the
- dedicated USART IRQ when using Interrupt mode or the DMA IRQ when
- using DMA mode.
- The HAL_USART_TxCpltCallback(), HAL_USART_RxCpltCallback() and HAL_USART_TxRxCpltCallback() user callbacks
- will be executed respectively at the end of the transmit or Receive process
- The HAL_USART_ErrorCallback()user callback will be executed when a communication error is detected
-
- (#) Blocking mode API's are :
- (++) HAL_USART_Transmit() in simplex mode
- (++) HAL_USART_Receive() in full duplex receive only
- (++) HAL_USART_TransmitReceive() in full duplex mode
-
- (#) Non-Blocking mode API's with Interrupt are :
- (++) HAL_USART_Transmit_IT() in simplex mode
- (++) HAL_USART_Receive_IT() in full duplex receive only
- (++) HAL_USART_TransmitReceive_IT() in full duplex mode
- (++) HAL_USART_IRQHandler()
-
- (#) No-Blocking mode API's with DMA are :
- (++) HAL_USART_Transmit_DMA() in simplex mode
- (++) HAL_USART_Receive_DMA() in full duplex receive only
- (++) HAL_USART_TransmitReceive_DMA() in full duplex mode
- (++) HAL_USART_DMAPause()
- (++) HAL_USART_DMAResume()
- (++) HAL_USART_DMAStop()
-
- (#) A set of Transfer Complete Callbacks are provided in Non_Blocking mode:
- (++) HAL_USART_TxCpltCallback()
- (++) HAL_USART_RxCpltCallback()
- (++) HAL_USART_TxHalfCpltCallback()
- (++) HAL_USART_RxHalfCpltCallback()
- (++) HAL_USART_ErrorCallback()
- (++) HAL_USART_TxRxCpltCallback()
-
- (#) Non-Blocking mode transfers could be aborted using Abort API's :
- (++) HAL_USART_Abort()
- (++) HAL_USART_Abort_IT()
-
- (#) For Abort services based on interrupts (HAL_USART_Abort_IT), a Abort Complete Callbacks is provided:
- (++) HAL_USART_AbortCpltCallback()
-
- (#) In Non-Blocking mode transfers, possible errors are split into 2 categories.
- Errors are handled as follows :
- (++) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is
- to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error in Interrupt mode reception .
- Received character is then retrieved and stored in Rx buffer, Error code is set to allow user to identify error type,
- and HAL_USART_ErrorCallback() user callback is executed. Transfer is kept ongoing on USART side.
- If user wants to abort it, Abort services should be called by user.
- (++) Error is considered as Blocking : Transfer could not be completed properly and is aborted.
- This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode.
- Error code is set to allow user to identify error type, and HAL_USART_ErrorCallback() user callback is executed.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Simplex send an amount of data in blocking mode.
- * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
- * the sent data is handled as a set of u16. In this case, Size must indicate the number
- * of u16 provided through pTxData.
- * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
- * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits)
- * (as sent data will be handled using u16 pointer cast). Depending on compilation chain,
- * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pTxData.
- * @param husart USART handle.
- * @param pTxData Pointer to data buffer (u8 or u16 data elements).
- * @param Size Amount of data elements (u8 or u16) to be sent.
- * @param Timeout Timeout duration.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout)
-{
- uint8_t *ptxdata8bits;
- uint16_t *ptxdata16bits;
- uint32_t tickstart;
-
- if (husart->State == HAL_USART_STATE_READY)
- {
- if ((pTxData == NULL) || (Size == 0U))
- {
- return HAL_ERROR;
- }
-
- /* In case of 9bits/No Parity transfer, pTxData buffer provided as input parameter
- should be aligned on a u16 frontier, as data to be filled into TDR will be
- handled through a u16 cast. */
- if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
- {
- if ((((uint32_t)pTxData) & 1U) != 0U)
- {
- return HAL_ERROR;
- }
- }
-
- /* Process Locked */
- __HAL_LOCK(husart);
-
- husart->ErrorCode = HAL_USART_ERROR_NONE;
- husart->State = HAL_USART_STATE_BUSY_TX;
-
- /* Init tickstart for timeout managment*/
- tickstart = HAL_GetTick();
-
- husart->TxXferSize = Size;
- husart->TxXferCount = Size;
-
- /* In case of 9bits/No Parity transfer, pTxData needs to be handled as a uint16_t pointer */
- if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
- {
- ptxdata8bits = NULL;
- ptxdata16bits = (uint16_t *) pTxData;
- }
- else
- {
- ptxdata8bits = pTxData;
- ptxdata16bits = NULL;
- }
-
- /* Check the remaining data to be sent */
- while (husart->TxXferCount > 0U)
- {
- if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- if (ptxdata8bits == NULL)
- {
- husart->Instance->TDR = (uint16_t)(*ptxdata16bits & 0x01FFU);
- ptxdata16bits++;
- }
- else
- {
- husart->Instance->TDR = (uint8_t)(*ptxdata8bits & 0xFFU);
- ptxdata8bits++;
- }
-
- husart->TxXferCount--;
- }
-
- if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Clear Transmission Complete Flag */
- __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_TCF);
-
- /* Clear overrun flag and discard the received data */
- __HAL_USART_CLEAR_OREFLAG(husart);
- __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST);
-#if defined(USART_RQR_TXFRQ)
- __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST);
-#endif /* USART_RQR_TXFRQ */
-
- /* At end of Tx process, restore husart->State to Ready */
- husart->State = HAL_USART_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(husart);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive an amount of data in blocking mode.
- * @note To receive synchronous data, dummy data are simultaneously transmitted.
- * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
- * the received data is handled as a set of u16. In this case, Size must indicate the number
- * of u16 available through pRxData.
- * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
- * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits)
- * (as received data will be handled using u16 pointer cast). Depending on compilation chain,
- * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pRxData.
- * @param husart USART handle.
- * @param pRxData Pointer to data buffer (u8 or u16 data elements).
- * @param Size Amount of data elements (u8 or u16) to be received.
- * @param Timeout Timeout duration.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout)
-{
- uint8_t *prxdata8bits;
- uint16_t *prxdata16bits;
- uint16_t uhMask;
- uint32_t tickstart;
-
- if (husart->State == HAL_USART_STATE_READY)
- {
- if ((pRxData == NULL) || (Size == 0U))
- {
- return HAL_ERROR;
- }
-
- /* In case of 9bits/No Parity transfer, pRxData buffer provided as input parameter
- should be aligned on a u16 frontier, as data to be received from RDR will be
- handled through a u16 cast. */
- if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
- {
- if ((((uint32_t)pRxData) & 1U) != 0U)
- {
- return HAL_ERROR;
- }
- }
-
- /* Process Locked */
- __HAL_LOCK(husart);
-
- husart->ErrorCode = HAL_USART_ERROR_NONE;
- husart->State = HAL_USART_STATE_BUSY_RX;
-
- /* Init tickstart for timeout managment*/
- tickstart = HAL_GetTick();
-
- husart->RxXferSize = Size;
- husart->RxXferCount = Size;
-
- /* Computation of USART mask to apply to RDR register */
- USART_MASK_COMPUTATION(husart);
- uhMask = husart->Mask;
-
- /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */
- if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
- {
- prxdata8bits = NULL;
- prxdata16bits = (uint16_t *) pRxData;
- }
- else
- {
- prxdata8bits = pRxData;
- prxdata16bits = NULL;
- }
-
- /* as long as data have to be received */
- while (husart->RxXferCount > 0U)
- {
- {
- /* Wait until TXE flag is set to send dummy byte in order to generate the
- * clock for the slave to send data.
- * Whatever the frame length (7, 8 or 9-bit long), the same dummy value
- * can be written for all the cases. */
- if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x0FF);
- }
-
- /* Wait for RXNE Flag */
- if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- if (prxdata8bits == NULL)
- {
- *prxdata16bits = (uint16_t)(husart->Instance->RDR & uhMask);
- prxdata16bits++;
- }
- else
- {
- *prxdata8bits = (uint8_t)(husart->Instance->RDR & (uint8_t)(uhMask & 0xFFU));
- prxdata8bits++;
- }
-
- husart->RxXferCount--;
-
- }
-
-
- /* At end of Rx process, restore husart->State to Ready */
- husart->State = HAL_USART_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(husart);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Full-Duplex Send and Receive an amount of data in blocking mode.
- * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
- * the sent data and the received data are handled as sets of u16. In this case, Size must indicate the number
- * of u16 available through pTxData and through pRxData.
- * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
- * address of user data buffers containing data to be sent/received, should be aligned on a half word frontier (16 bits)
- * (as sent/received data will be handled using u16 pointer cast). Depending on compilation chain,
- * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pTxData and pRxData.
- * @param husart USART handle.
- * @param pTxData pointer to TX data buffer (u8 or u16 data elements).
- * @param pRxData pointer to RX data buffer (u8 or u16 data elements).
- * @param Size amount of data elements (u8 or u16) to be sent (same amount to be received).
- * @param Timeout Timeout duration.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData,
- uint16_t Size, uint32_t Timeout)
-{
- uint8_t *prxdata8bits;
- uint16_t *prxdata16bits;
- uint8_t *ptxdata8bits;
- uint16_t *ptxdata16bits;
- uint16_t uhMask;
- uint16_t rxdatacount;
- uint32_t tickstart;
-
- if (husart->State == HAL_USART_STATE_READY)
- {
- if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U))
- {
- return HAL_ERROR;
- }
-
- /* In case of 9bits/No Parity transfer, pTxData and pRxData buffers provided as input parameter
- should be aligned on a u16 frontier, as data to be filled into TDR/retrieved from RDR will be
- handled through a u16 cast. */
- if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
- {
- if (((((uint32_t)pTxData) & 1U) != 0U) || ((((uint32_t)pRxData) & 1U) != 0U))
- {
- return HAL_ERROR;
- }
- }
-
- /* Process Locked */
- __HAL_LOCK(husart);
-
- husart->ErrorCode = HAL_USART_ERROR_NONE;
- husart->State = HAL_USART_STATE_BUSY_RX;
-
- /* Init tickstart for timeout managment*/
- tickstart = HAL_GetTick();
-
- husart->RxXferSize = Size;
- husart->TxXferSize = Size;
- husart->TxXferCount = Size;
- husart->RxXferCount = Size;
-
- /* Computation of USART mask to apply to RDR register */
- USART_MASK_COMPUTATION(husart);
- uhMask = husart->Mask;
-
- /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */
- if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
- {
- prxdata8bits = NULL;
- ptxdata8bits = NULL;
- ptxdata16bits = (uint16_t *) pTxData;
- prxdata16bits = (uint16_t *) pRxData;
- }
- else
- {
- prxdata8bits = pRxData;
- ptxdata8bits = pTxData;
- ptxdata16bits = NULL;
- prxdata16bits = NULL;
- }
-
- if (husart->TxXferCount == 0x01U)
- {
- /* Wait until TXE flag is set to send data */
- if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- if (ptxdata8bits == NULL)
- {
- husart->Instance->TDR = (uint16_t)(*ptxdata16bits & uhMask);
- ptxdata16bits++;
- }
- else
- {
- husart->Instance->TDR = (uint8_t)(*ptxdata8bits & (uint8_t)(uhMask & 0xFFU));
- ptxdata8bits++;
- }
-
- husart->TxXferCount--;
- }
-
- /* Check the remain data to be sent */
- /* rxdatacount is a temporary variable for MISRAC2012-Rule-13.5 */
- rxdatacount = husart->RxXferCount;
- while ((husart->TxXferCount > 0U) || (rxdatacount > 0U))
- {
- if (husart->TxXferCount > 0U)
- {
- /* Wait until TXE flag is set to send data */
- if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- if (ptxdata8bits == NULL)
- {
- husart->Instance->TDR = (uint16_t)(*ptxdata16bits & uhMask);
- ptxdata16bits++;
- }
- else
- {
- husart->Instance->TDR = (uint8_t)(*ptxdata8bits & (uint8_t)(uhMask & 0xFFU));
- ptxdata8bits++;
- }
-
- husart->TxXferCount--;
- }
-
- if (husart->RxXferCount > 0U)
- {
- /* Wait for RXNE Flag */
- if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- if (prxdata8bits == NULL)
- {
- *prxdata16bits = (uint16_t)(husart->Instance->RDR & uhMask);
- prxdata16bits++;
- }
- else
- {
- *prxdata8bits = (uint8_t)(husart->Instance->RDR & (uint8_t)(uhMask & 0xFFU));
- prxdata8bits++;
- }
-
- husart->RxXferCount--;
- }
- rxdatacount = husart->RxXferCount;
- }
-
- /* At end of TxRx process, restore husart->State to Ready */
- husart->State = HAL_USART_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(husart);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Send an amount of data in interrupt mode.
- * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
- * the sent data is handled as a set of u16. In this case, Size must indicate the number
- * of u16 provided through pTxData.
- * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
- * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits)
- * (as sent data will be handled using u16 pointer cast). Depending on compilation chain,
- * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pTxData.
- * @param husart USART handle.
- * @param pTxData pointer to data buffer (u8 or u16 data elements).
- * @param Size amount of data elements (u8 or u16) to be sent.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size)
-{
- if (husart->State == HAL_USART_STATE_READY)
- {
- if ((pTxData == NULL) || (Size == 0U))
- {
- return HAL_ERROR;
- }
-
- /* In case of 9bits/No Parity transfer, pTxData buffer provided as input parameter
- should be aligned on a u16 frontier, as data to be filled into TDR will be
- handled through a u16 cast. */
- if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
- {
- if ((((uint32_t)pTxData) & 1U) != 0U)
- {
- return HAL_ERROR;
- }
- }
-
- /* Process Locked */
- __HAL_LOCK(husart);
-
- husart->pTxBuffPtr = pTxData;
- husart->TxXferSize = Size;
- husart->TxXferCount = Size;
- husart->TxISR = NULL;
-
- husart->ErrorCode = HAL_USART_ERROR_NONE;
- husart->State = HAL_USART_STATE_BUSY_TX;
-
- /* The USART Error Interrupts: (Frame error, noise error, overrun error)
- are not managed by the USART Transmit Process to avoid the overrun interrupt
- when the usart mode is configured for transmit and receive "USART_MODE_TX_RX"
- to benefit for the frame error and noise interrupts the usart mode should be
- configured only for transmit "USART_MODE_TX" */
-
- {
- /* Set the Tx ISR function pointer according to the data word length */
- if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
- {
- husart->TxISR = USART_TxISR_16BIT;
- }
- else
- {
- husart->TxISR = USART_TxISR_8BIT;
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(husart);
-
- /* Enable the USART Transmit Data Register Empty Interrupt */
- __HAL_USART_ENABLE_IT(husart, USART_IT_TXE);
- }
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive an amount of data in interrupt mode.
- * @note To receive synchronous data, dummy data are simultaneously transmitted.
- * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
- * the received data is handled as a set of u16. In this case, Size must indicate the number
- * of u16 available through pRxData.
- * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
- * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits)
- * (as received data will be handled using u16 pointer cast). Depending on compilation chain,
- * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pRxData.
- * @param husart USART handle.
- * @param pRxData pointer to data buffer (u8 or u16 data elements).
- * @param Size amount of data elements (u8 or u16) to be received.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size)
-{
-
- if (husart->State == HAL_USART_STATE_READY)
- {
- if ((pRxData == NULL) || (Size == 0U))
- {
- return HAL_ERROR;
- }
-
- /* In case of 9bits/No Parity transfer, pRxData buffer provided as input parameter
- should be aligned on a u16 frontier, as data to be received from RDR will be
- handled through a u16 cast. */
- if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
- {
- if ((((uint32_t)pRxData) & 1U) != 0U)
- {
- return HAL_ERROR;
- }
- }
-
- /* Process Locked */
- __HAL_LOCK(husart);
-
- husart->pRxBuffPtr = pRxData;
- husart->RxXferSize = Size;
- husart->RxXferCount = Size;
- husart->RxISR = NULL;
-
- USART_MASK_COMPUTATION(husart);
-
- husart->ErrorCode = HAL_USART_ERROR_NONE;
- husart->State = HAL_USART_STATE_BUSY_RX;
-
- /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */
- SET_BIT(husart->Instance->CR3, USART_CR3_EIE);
-
- {
- /* Set the Rx ISR function pointer according to the data word length */
- if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
- {
- husart->RxISR = USART_RxISR_16BIT;
- }
- else
- {
- husart->RxISR = USART_RxISR_8BIT;
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(husart);
-
- /* Enable the USART Parity Error and Data Register not empty Interrupts */
- SET_BIT(husart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE);
- }
-
- {
- /* Send dummy data in order to generate the clock for the Slave to send the next data.
- */
- {
- husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF);
- }
- }
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Full-Duplex Send and Receive an amount of data in interrupt mode.
- * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
- * the sent data and the received data are handled as sets of u16. In this case, Size must indicate the number
- * of u16 available through pTxData and through pRxData.
- * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
- * address of user data buffers containing data to be sent/received, should be aligned on a half word frontier (16 bits)
- * (as sent/received data will be handled using u16 pointer cast). Depending on compilation chain,
- * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pTxData and pRxData.
- * @param husart USART handle.
- * @param pTxData pointer to TX data buffer (u8 or u16 data elements).
- * @param pRxData pointer to RX data buffer (u8 or u16 data elements).
- * @param Size amount of data elements (u8 or u16) to be sent (same amount to be received).
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData,
- uint16_t Size)
-{
-
- if (husart->State == HAL_USART_STATE_READY)
- {
- if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U))
- {
- return HAL_ERROR;
- }
-
- /* In case of 9bits/No Parity transfer, pTxData and pRxData buffers provided as input parameter
- should be aligned on a u16 frontier, as data to be filled into TDR/retrieved from RDR will be
- handled through a u16 cast. */
- if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
- {
- if (((((uint32_t)pTxData) & 1U) != 0U) || ((((uint32_t)pRxData) & 1U) != 0U))
- {
- return HAL_ERROR;
- }
- }
-
- /* Process Locked */
- __HAL_LOCK(husart);
-
- husart->pRxBuffPtr = pRxData;
- husart->RxXferSize = Size;
- husart->RxXferCount = Size;
- husart->pTxBuffPtr = pTxData;
- husart->TxXferSize = Size;
- husart->TxXferCount = Size;
-
- /* Computation of USART mask to apply to RDR register */
- USART_MASK_COMPUTATION(husart);
-
- husart->ErrorCode = HAL_USART_ERROR_NONE;
- husart->State = HAL_USART_STATE_BUSY_TX_RX;
-
- {
- if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
- {
- husart->TxISR = USART_TxISR_16BIT;
- husart->RxISR = USART_RxISR_16BIT;
- }
- else
- {
- husart->TxISR = USART_TxISR_8BIT;
- husart->RxISR = USART_RxISR_8BIT;
- }
-
- /* Process Locked */
- __HAL_UNLOCK(husart);
-
- /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */
- SET_BIT(husart->Instance->CR3, USART_CR3_EIE);
-
- /* Enable the USART Parity Error and USART Data Register not empty Interrupts */
- SET_BIT(husart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE);
-
- /* Enable the USART Transmit Data Register Empty Interrupt */
- SET_BIT(husart->Instance->CR1, USART_CR1_TXEIE);
- }
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Send an amount of data in DMA mode.
- * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
- * the sent data is handled as a set of u16. In this case, Size must indicate the number
- * of u16 provided through pTxData.
- * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
- * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits)
- * (as sent data will be handled by DMA from halfword frontier). Depending on compilation chain,
- * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pTxData.
- * @param husart USART handle.
- * @param pTxData pointer to data buffer (u8 or u16 data elements).
- * @param Size amount of data elements (u8 or u16) to be sent.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size)
-{
- HAL_StatusTypeDef status = HAL_OK;
- uint32_t *tmp;
-
- if (husart->State == HAL_USART_STATE_READY)
- {
- if ((pTxData == NULL) || (Size == 0U))
- {
- return HAL_ERROR;
- }
-
- /* In case of 9bits/No Parity transfer, pTxData buffer provided as input parameter
- should be aligned on a u16 frontier, as data copy into TDR will be
- handled by DMA from a u16 frontier. */
- if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
- {
- if ((((uint32_t)pTxData) & 1U) != 0U)
- {
- return HAL_ERROR;
- }
- }
-
- /* Process Locked */
- __HAL_LOCK(husart);
-
- husart->pTxBuffPtr = pTxData;
- husart->TxXferSize = Size;
- husart->TxXferCount = Size;
-
- husart->ErrorCode = HAL_USART_ERROR_NONE;
- husart->State = HAL_USART_STATE_BUSY_TX;
-
- if (husart->hdmatx != NULL)
- {
- /* Set the USART DMA transfer complete callback */
- husart->hdmatx->XferCpltCallback = USART_DMATransmitCplt;
-
- /* Set the USART DMA Half transfer complete callback */
- husart->hdmatx->XferHalfCpltCallback = USART_DMATxHalfCplt;
-
- /* Set the DMA error callback */
- husart->hdmatx->XferErrorCallback = USART_DMAError;
-
- /* Enable the USART transmit DMA channel */
- tmp = (uint32_t *)&pTxData;
- status = HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t *)tmp, (uint32_t)&husart->Instance->TDR, Size);
- }
-
- if (status == HAL_OK)
- {
- /* Clear the TC flag in the ICR register */
- __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_TCF);
-
- /* Process Unlocked */
- __HAL_UNLOCK(husart);
-
- /* Enable the DMA transfer for transmit request by setting the DMAT bit
- in the USART CR3 register */
- SET_BIT(husart->Instance->CR3, USART_CR3_DMAT);
-
- return HAL_OK;
- }
- else
- {
- /* Set error code to DMA */
- husart->ErrorCode = HAL_USART_ERROR_DMA;
-
- /* Process Unlocked */
- __HAL_UNLOCK(husart);
-
- /* Restore husart->State to ready */
- husart->State = HAL_USART_STATE_READY;
-
- return HAL_ERROR;
- }
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive an amount of data in DMA mode.
- * @note When the USART parity is enabled (PCE = 1), the received data contain
- * the parity bit (MSB position).
- * @note The USART DMA transmit channel must be configured in order to generate the clock for the slave.
- * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
- * the received data is handled as a set of u16. In this case, Size must indicate the number
- * of u16 available through pRxData.
- * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
- * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits)
- * (as received data will be handled by DMA from halfword frontier). Depending on compilation chain,
- * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pRxData.
- * @param husart USART handle.
- * @param pRxData pointer to data buffer (u8 or u16 data elements).
- * @param Size amount of data elements (u8 or u16) to be received.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size)
-{
- HAL_StatusTypeDef status = HAL_OK;
- uint32_t *tmp = (uint32_t *)&pRxData;
-
- /* Check that a Rx process is not already ongoing */
- if (husart->State == HAL_USART_STATE_READY)
- {
- if ((pRxData == NULL) || (Size == 0U))
- {
- return HAL_ERROR;
- }
-
- /* In case of 9bits/No Parity transfer, pRxData buffer provided as input parameter
- should be aligned on a u16 frontier, as data copy from RDR will be
- handled by DMA from a u16 frontier. */
- if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
- {
- if ((((uint32_t)pRxData) & 1U) != 0U)
- {
- return HAL_ERROR;
- }
- }
-
- /* Process Locked */
- __HAL_LOCK(husart);
-
- husart->pRxBuffPtr = pRxData;
- husart->RxXferSize = Size;
- husart->pTxBuffPtr = pRxData;
- husart->TxXferSize = Size;
-
- husart->ErrorCode = HAL_USART_ERROR_NONE;
- husart->State = HAL_USART_STATE_BUSY_RX;
-
- if (husart->hdmarx != NULL)
- {
- /* Set the USART DMA Rx transfer complete callback */
- husart->hdmarx->XferCpltCallback = USART_DMAReceiveCplt;
-
- /* Set the USART DMA Half transfer complete callback */
- husart->hdmarx->XferHalfCpltCallback = USART_DMARxHalfCplt;
-
- /* Set the USART DMA Rx transfer error callback */
- husart->hdmarx->XferErrorCallback = USART_DMAError;
-
- /* Enable the USART receive DMA channel */
- status = HAL_DMA_Start_IT(husart->hdmarx, (uint32_t)&husart->Instance->RDR, *(uint32_t *)tmp, Size);
- }
-
- {
- /* Enable the USART transmit DMA channel: the transmit channel is used in order
- to generate in the non-blocking mode the clock to the slave device,
- this mode isn't a simplex receive mode but a full-duplex receive mode */
-
- /* Set the USART DMA Tx Complete and Error callback to Null */
- if (husart->hdmatx != NULL)
- {
- husart->hdmatx->XferErrorCallback = NULL;
- husart->hdmatx->XferHalfCpltCallback = NULL;
- husart->hdmatx->XferCpltCallback = NULL;
- status = HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t *)tmp, (uint32_t)&husart->Instance->TDR, Size);
- }
- }
-
- if (status == HAL_OK)
- {
- /* Process Unlocked */
- __HAL_UNLOCK(husart);
-
- /* Enable the USART Parity Error Interrupt */
- SET_BIT(husart->Instance->CR1, USART_CR1_PEIE);
-
- /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */
- SET_BIT(husart->Instance->CR3, USART_CR3_EIE);
-
- /* Enable the DMA transfer for the receiver request by setting the DMAR bit
- in the USART CR3 register */
- SET_BIT(husart->Instance->CR3, USART_CR3_DMAR);
-
- /* Enable the DMA transfer for transmit request by setting the DMAT bit
- in the USART CR3 register */
- SET_BIT(husart->Instance->CR3, USART_CR3_DMAT);
-
- return HAL_OK;
- }
- else
- {
- if (husart->hdmarx != NULL)
- {
- status = HAL_DMA_Abort(husart->hdmarx);
- }
-
- /* No need to check on error code */
- UNUSED(status);
-
- /* Set error code to DMA */
- husart->ErrorCode = HAL_USART_ERROR_DMA;
-
- /* Process Unlocked */
- __HAL_UNLOCK(husart);
-
- /* Restore husart->State to ready */
- husart->State = HAL_USART_STATE_READY;
-
- return HAL_ERROR;
- }
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Full-Duplex Transmit Receive an amount of data in non-blocking mode.
- * @note When the USART parity is enabled (PCE = 1) the data received contain the parity bit.
- * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
- * the sent data and the received data are handled as sets of u16. In this case, Size must indicate the number
- * of u16 available through pTxData and through pRxData.
- * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
- * address of user data buffers containing data to be sent/received, should be aligned on a half word frontier (16 bits)
- * (as sent/received data will be handled by DMA from halfword frontier). Depending on compilation chain,
- * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pTxData and pRxData.
- * @param husart USART handle.
- * @param pTxData pointer to TX data buffer (u8 or u16 data elements).
- * @param pRxData pointer to RX data buffer (u8 or u16 data elements).
- * @param Size amount of data elements (u8 or u16) to be received/sent.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData,
- uint16_t Size)
-{
- HAL_StatusTypeDef status;
- uint32_t *tmp;
-
- if (husart->State == HAL_USART_STATE_READY)
- {
- if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U))
- {
- return HAL_ERROR;
- }
-
- /* In case of 9bits/No Parity transfer, pTxData and pRxData buffers provided as input parameter
- should be aligned on a u16 frontier, as data copy to/from TDR/RDR will be
- handled by DMA from a u16 frontier. */
- if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
- {
- if (((((uint32_t)pTxData) & 1U) != 0U) || ((((uint32_t)pRxData) & 1U) != 0U))
- {
- return HAL_ERROR;
- }
- }
-
- /* Process Locked */
- __HAL_LOCK(husart);
-
- husart->pRxBuffPtr = pRxData;
- husart->RxXferSize = Size;
- husart->pTxBuffPtr = pTxData;
- husart->TxXferSize = Size;
-
- husart->ErrorCode = HAL_USART_ERROR_NONE;
- husart->State = HAL_USART_STATE_BUSY_TX_RX;
-
- if ((husart->hdmarx != NULL) && (husart->hdmatx != NULL))
- {
- /* Set the USART DMA Rx transfer complete callback */
- husart->hdmarx->XferCpltCallback = USART_DMAReceiveCplt;
-
- /* Set the USART DMA Half transfer complete callback */
- husart->hdmarx->XferHalfCpltCallback = USART_DMARxHalfCplt;
-
- /* Set the USART DMA Tx transfer complete callback */
- husart->hdmatx->XferCpltCallback = USART_DMATransmitCplt;
-
- /* Set the USART DMA Half transfer complete callback */
- husart->hdmatx->XferHalfCpltCallback = USART_DMATxHalfCplt;
-
- /* Set the USART DMA Tx transfer error callback */
- husart->hdmatx->XferErrorCallback = USART_DMAError;
-
- /* Set the USART DMA Rx transfer error callback */
- husart->hdmarx->XferErrorCallback = USART_DMAError;
-
- /* Enable the USART receive DMA channel */
- tmp = (uint32_t *)&pRxData;
- status = HAL_DMA_Start_IT(husart->hdmarx, (uint32_t)&husart->Instance->RDR, *(uint32_t *)tmp, Size);
-
- /* Enable the USART transmit DMA channel */
- if (status == HAL_OK)
- {
- tmp = (uint32_t *)&pTxData;
- status = HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t *)tmp, (uint32_t)&husart->Instance->TDR, Size);
- }
- }
- else
- {
- status = HAL_ERROR;
- }
-
- if (status == HAL_OK)
- {
- /* Process Unlocked */
- __HAL_UNLOCK(husart);
-
- /* Enable the USART Parity Error Interrupt */
- SET_BIT(husart->Instance->CR1, USART_CR1_PEIE);
-
- /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */
- SET_BIT(husart->Instance->CR3, USART_CR3_EIE);
-
- /* Clear the TC flag in the ICR register */
- __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_TCF);
-
- /* Enable the DMA transfer for the receiver request by setting the DMAR bit
- in the USART CR3 register */
- SET_BIT(husart->Instance->CR3, USART_CR3_DMAR);
-
- /* Enable the DMA transfer for transmit request by setting the DMAT bit
- in the USART CR3 register */
- SET_BIT(husart->Instance->CR3, USART_CR3_DMAT);
-
- return HAL_OK;
- }
- else
- {
- if (husart->hdmarx != NULL)
- {
- status = HAL_DMA_Abort(husart->hdmarx);
- }
-
- /* No need to check on error code */
- UNUSED(status);
-
- /* Set error code to DMA */
- husart->ErrorCode = HAL_USART_ERROR_DMA;
-
- /* Process Unlocked */
- __HAL_UNLOCK(husart);
-
- /* Restore husart->State to ready */
- husart->State = HAL_USART_STATE_READY;
-
- return HAL_ERROR;
- }
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Pause the DMA Transfer.
- * @param husart USART handle.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart)
-{
- const HAL_USART_StateTypeDef state = husart->State;
-
- /* Process Locked */
- __HAL_LOCK(husart);
-
- if ((HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT)) &&
- (state == HAL_USART_STATE_BUSY_TX))
- {
- /* Disable the USART DMA Tx request */
- CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT);
- }
- else if ((state == HAL_USART_STATE_BUSY_RX) ||
- (state == HAL_USART_STATE_BUSY_TX_RX))
- {
- if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT))
- {
- /* Disable the USART DMA Tx request */
- CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT);
- }
- if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR))
- {
- /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */
- CLEAR_BIT(husart->Instance->CR1, USART_CR1_PEIE);
- CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE);
-
- /* Disable the USART DMA Rx request */
- CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR);
- }
- }
- else
- {
- /* Nothing to do */
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(husart);
-
- return HAL_OK;
-}
-
-/**
- * @brief Resume the DMA Transfer.
- * @param husart USART handle.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart)
-{
- const HAL_USART_StateTypeDef state = husart->State;
-
- /* Process Locked */
- __HAL_LOCK(husart);
-
- if (state == HAL_USART_STATE_BUSY_TX)
- {
- /* Enable the USART DMA Tx request */
- SET_BIT(husart->Instance->CR3, USART_CR3_DMAT);
- }
- else if ((state == HAL_USART_STATE_BUSY_RX) ||
- (state == HAL_USART_STATE_BUSY_TX_RX))
- {
- /* Clear the Overrun flag before resuming the Rx transfer*/
- __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_OREF);
-
- /* Reenable PE and ERR (Frame error, noise error, overrun error) interrupts */
- SET_BIT(husart->Instance->CR1, USART_CR1_PEIE);
- SET_BIT(husart->Instance->CR3, USART_CR3_EIE);
-
- /* Enable the USART DMA Rx request before the DMA Tx request */
- SET_BIT(husart->Instance->CR3, USART_CR3_DMAR);
-
- /* Enable the USART DMA Tx request */
- SET_BIT(husart->Instance->CR3, USART_CR3_DMAT);
- }
- else
- {
- /* Nothing to do */
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(husart);
-
- return HAL_OK;
-}
-
-/**
- * @brief Stop the DMA Transfer.
- * @param husart USART handle.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart)
-{
- /* The Lock is not implemented on this API to allow the user application
- to call the HAL USART API under callbacks HAL_USART_TxCpltCallback() / HAL_USART_RxCpltCallback() /
- HAL_USART_TxHalfCpltCallback / HAL_USART_RxHalfCpltCallback:
- indeed, when HAL_DMA_Abort() API is called, the DMA TX/RX Transfer or Half Transfer complete
- interrupt is generated if the DMA transfer interruption occurs at the middle or at the end of
- the stream and the corresponding call back is executed. */
-
- /* Disable the USART Tx/Rx DMA requests */
- CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT);
- CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR);
-
- /* Abort the USART DMA tx channel */
- if (husart->hdmatx != NULL)
- {
- if (HAL_DMA_Abort(husart->hdmatx) != HAL_OK)
- {
- if (HAL_DMA_GetError(husart->hdmatx) == HAL_DMA_ERROR_TIMEOUT)
- {
- /* Set error code to DMA */
- husart->ErrorCode = HAL_USART_ERROR_DMA;
-
- return HAL_TIMEOUT;
- }
- }
- }
- /* Abort the USART DMA rx channel */
- if (husart->hdmarx != NULL)
- {
- if (HAL_DMA_Abort(husart->hdmarx) != HAL_OK)
- {
- if (HAL_DMA_GetError(husart->hdmarx) == HAL_DMA_ERROR_TIMEOUT)
- {
- /* Set error code to DMA */
- husart->ErrorCode = HAL_USART_ERROR_DMA;
-
- return HAL_TIMEOUT;
- }
- }
- }
-
- USART_EndTransfer(husart);
- husart->State = HAL_USART_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief Abort ongoing transfers (blocking mode).
- * @param husart USART handle.
- * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode.
- * This procedure performs following operations :
- * - Disable USART Interrupts (Tx and Rx)
- * - Disable the DMA transfer in the peripheral register (if enabled)
- * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode)
- * - Set handle State to READY
- * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_USART_Abort(USART_HandleTypeDef *husart)
-{
- CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE));
- CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE);
-
- /* Disable the USART DMA Tx request if enabled */
- if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT))
- {
- CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT);
-
- /* Abort the USART DMA Tx channel : use blocking DMA Abort API (no callback) */
- if (husart->hdmatx != NULL)
- {
- /* Set the USART DMA Abort callback to Null.
- No call back execution at end of DMA abort procedure */
- husart->hdmatx->XferAbortCallback = NULL;
-
- if (HAL_DMA_Abort(husart->hdmatx) != HAL_OK)
- {
- if (HAL_DMA_GetError(husart->hdmatx) == HAL_DMA_ERROR_TIMEOUT)
- {
- /* Set error code to DMA */
- husart->ErrorCode = HAL_USART_ERROR_DMA;
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
-
- /* Disable the USART DMA Rx request if enabled */
- if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR))
- {
- CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR);
-
- /* Abort the USART DMA Rx channel : use blocking DMA Abort API (no callback) */
- if (husart->hdmarx != NULL)
- {
- /* Set the USART DMA Abort callback to Null.
- No call back execution at end of DMA abort procedure */
- husart->hdmarx->XferAbortCallback = NULL;
-
- if (HAL_DMA_Abort(husart->hdmarx) != HAL_OK)
- {
- if (HAL_DMA_GetError(husart->hdmarx) == HAL_DMA_ERROR_TIMEOUT)
- {
- /* Set error code to DMA */
- husart->ErrorCode = HAL_USART_ERROR_DMA;
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
-
- /* Reset Tx and Rx transfer counters */
- husart->TxXferCount = 0U;
- husart->RxXferCount = 0U;
-
- /* Clear the Error flags in the ICR register */
- __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_OREF | USART_CLEAR_NEF | USART_CLEAR_PEF | USART_CLEAR_FEF);
-
-
- /* Discard the received data */
- __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST);
-
- /* Restore husart->State to Ready */
- husart->State = HAL_USART_STATE_READY;
-
- /* Reset Handle ErrorCode to No Error */
- husart->ErrorCode = HAL_USART_ERROR_NONE;
-
- return HAL_OK;
-}
-
-/**
- * @brief Abort ongoing transfers (Interrupt mode).
- * @param husart USART handle.
- * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode.
- * This procedure performs following operations :
- * - Disable USART Interrupts (Tx and Rx)
- * - Disable the DMA transfer in the peripheral register (if enabled)
- * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode)
- * - Set handle State to READY
- * - At abort completion, call user abort complete callback
- * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be
- * considered as completed only when user abort complete callback is executed (not when exiting function).
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_USART_Abort_IT(USART_HandleTypeDef *husart)
-{
- uint32_t abortcplt = 1U;
-
- CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE));
- CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE);
-
- /* If DMA Tx and/or DMA Rx Handles are associated to USART Handle, DMA Abort complete callbacks should be initialised
- before any call to DMA Abort functions */
- /* DMA Tx Handle is valid */
- if (husart->hdmatx != NULL)
- {
- /* Set DMA Abort Complete callback if USART DMA Tx request if enabled.
- Otherwise, set it to NULL */
- if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT))
- {
- husart->hdmatx->XferAbortCallback = USART_DMATxAbortCallback;
- }
- else
- {
- husart->hdmatx->XferAbortCallback = NULL;
- }
- }
- /* DMA Rx Handle is valid */
- if (husart->hdmarx != NULL)
- {
- /* Set DMA Abort Complete callback if USART DMA Rx request if enabled.
- Otherwise, set it to NULL */
- if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR))
- {
- husart->hdmarx->XferAbortCallback = USART_DMARxAbortCallback;
- }
- else
- {
- husart->hdmarx->XferAbortCallback = NULL;
- }
- }
-
- /* Disable the USART DMA Tx request if enabled */
- if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT))
- {
- /* Disable DMA Tx at USART level */
- CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT);
-
- /* Abort the USART DMA Tx channel : use non blocking DMA Abort API (callback) */
- if (husart->hdmatx != NULL)
- {
- /* USART Tx DMA Abort callback has already been initialised :
- will lead to call HAL_USART_AbortCpltCallback() at end of DMA abort procedure */
-
- /* Abort DMA TX */
- if (HAL_DMA_Abort_IT(husart->hdmatx) != HAL_OK)
- {
- husart->hdmatx->XferAbortCallback = NULL;
- }
- else
- {
- abortcplt = 0U;
- }
- }
- }
-
- /* Disable the USART DMA Rx request if enabled */
- if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR))
- {
- CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR);
-
- /* Abort the USART DMA Rx channel : use non blocking DMA Abort API (callback) */
- if (husart->hdmarx != NULL)
- {
- /* USART Rx DMA Abort callback has already been initialised :
- will lead to call HAL_USART_AbortCpltCallback() at end of DMA abort procedure */
-
- /* Abort DMA RX */
- if (HAL_DMA_Abort_IT(husart->hdmarx) != HAL_OK)
- {
- husart->hdmarx->XferAbortCallback = NULL;
- abortcplt = 1U;
- }
- else
- {
- abortcplt = 0U;
- }
- }
- }
-
- /* if no DMA abort complete callback execution is required => call user Abort Complete callback */
- if (abortcplt == 1U)
- {
- /* Reset Tx and Rx transfer counters */
- husart->TxXferCount = 0U;
- husart->RxXferCount = 0U;
-
- /* Reset errorCode */
- husart->ErrorCode = HAL_USART_ERROR_NONE;
-
- /* Clear the Error flags in the ICR register */
- __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_OREF | USART_CLEAR_NEF | USART_CLEAR_PEF | USART_CLEAR_FEF);
-
-
- /* Discard the received data */
- __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST);
-
- /* Restore husart->State to Ready */
- husart->State = HAL_USART_STATE_READY;
-
- /* As no DMA to be aborted, call directly user Abort complete callback */
-#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
- /* Call registered Abort Complete Callback */
- husart->AbortCpltCallback(husart);
-#else
- /* Call legacy weak Abort Complete Callback */
- HAL_USART_AbortCpltCallback(husart);
-#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Handle USART interrupt request.
- * @param husart USART handle.
- * @retval None
- */
-void HAL_USART_IRQHandler(USART_HandleTypeDef *husart)
-{
- uint32_t isrflags = READ_REG(husart->Instance->ISR);
- uint32_t cr1its = READ_REG(husart->Instance->CR1);
- uint32_t cr3its = READ_REG(husart->Instance->CR3);
-
- uint32_t errorflags;
- uint32_t errorcode;
-
- /* If no error occurs */
- errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE));
- if (errorflags == 0U)
- {
- /* USART in mode Receiver ---------------------------------------------------*/
- if (((isrflags & USART_ISR_RXNE) != 0U)
- && ((cr1its & USART_CR1_RXNEIE) != 0U))
- {
- if (husart->RxISR != NULL)
- {
- husart->RxISR(husart);
- }
- return;
- }
- }
-
- /* If some errors occur */
- if ((errorflags != 0U)
- && (((cr3its & USART_CR3_EIE) != 0U)
- || ((cr1its & (USART_CR1_RXNEIE | USART_CR1_PEIE)) != 0U)))
- {
- /* USART parity error interrupt occurred -------------------------------------*/
- if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U))
- {
- __HAL_USART_CLEAR_IT(husart, USART_CLEAR_PEF);
-
- husart->ErrorCode |= HAL_USART_ERROR_PE;
- }
-
- /* USART frame error interrupt occurred --------------------------------------*/
- if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U))
- {
- __HAL_USART_CLEAR_IT(husart, USART_CLEAR_FEF);
-
- husart->ErrorCode |= HAL_USART_ERROR_FE;
- }
-
- /* USART noise error interrupt occurred --------------------------------------*/
- if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U))
- {
- __HAL_USART_CLEAR_IT(husart, USART_CLEAR_NEF);
-
- husart->ErrorCode |= HAL_USART_ERROR_NE;
- }
-
- /* USART Over-Run interrupt occurred -----------------------------------------*/
- if (((isrflags & USART_ISR_ORE) != 0U)
- && (((cr1its & USART_CR1_RXNEIE) != 0U) ||
- ((cr3its & USART_CR3_EIE) != 0U)))
- {
- __HAL_USART_CLEAR_IT(husart, USART_CLEAR_OREF);
-
- husart->ErrorCode |= HAL_USART_ERROR_ORE;
- }
-
-
- /* Call USART Error Call back function if need be --------------------------*/
- if (husart->ErrorCode != HAL_USART_ERROR_NONE)
- {
- /* USART in mode Receiver ---------------------------------------------------*/
- if (((isrflags & USART_ISR_RXNE) != 0U)
- && ((cr1its & USART_CR1_RXNEIE) != 0U))
- {
- if (husart->RxISR != NULL)
- {
- husart->RxISR(husart);
- }
- }
-
- /* If Overrun error occurs, or if any error occurs in DMA mode reception,
- consider error as blocking */
- errorcode = husart->ErrorCode & HAL_USART_ERROR_ORE;
- if ((HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR)) ||
- (errorcode != 0U))
- {
- /* Blocking error : transfer is aborted
- Set the USART state ready to be able to start again the process,
- Disable Interrupts, and disable DMA requests, if ongoing */
- USART_EndTransfer(husart);
-
- /* Disable the USART DMA Rx request if enabled */
- if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR))
- {
- CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR | USART_CR3_DMAR);
-
- /* Abort the USART DMA Tx channel */
- if (husart->hdmatx != NULL)
- {
- /* Set the USART Tx DMA Abort callback to NULL : no callback
- executed at end of DMA abort procedure */
- husart->hdmatx->XferAbortCallback = NULL;
-
- /* Abort DMA TX */
- (void)HAL_DMA_Abort_IT(husart->hdmatx);
- }
-
- /* Abort the USART DMA Rx channel */
- if (husart->hdmarx != NULL)
- {
- /* Set the USART Rx DMA Abort callback :
- will lead to call HAL_USART_ErrorCallback() at end of DMA abort procedure */
- husart->hdmarx->XferAbortCallback = USART_DMAAbortOnError;
-
- /* Abort DMA RX */
- if (HAL_DMA_Abort_IT(husart->hdmarx) != HAL_OK)
- {
- /* Call Directly husart->hdmarx->XferAbortCallback function in case of error */
- husart->hdmarx->XferAbortCallback(husart->hdmarx);
- }
- }
- else
- {
- /* Call user error callback */
-#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
- /* Call registered Error Callback */
- husart->ErrorCallback(husart);
-#else
- /* Call legacy weak Error Callback */
- HAL_USART_ErrorCallback(husart);
-#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
- }
- }
- else
- {
- /* Call user error callback */
-#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
- /* Call registered Error Callback */
- husart->ErrorCallback(husart);
-#else
- /* Call legacy weak Error Callback */
- HAL_USART_ErrorCallback(husart);
-#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
- }
- }
- else
- {
- /* Non Blocking error : transfer could go on.
- Error is notified to user through user error callback */
-#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
- /* Call registered Error Callback */
- husart->ErrorCallback(husart);
-#else
- /* Call legacy weak Error Callback */
- HAL_USART_ErrorCallback(husart);
-#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
- husart->ErrorCode = HAL_USART_ERROR_NONE;
- }
- }
- return;
-
- } /* End if some error occurs */
-
-
- /* USART in mode Transmitter ------------------------------------------------*/
- if (((isrflags & USART_ISR_TXE) != 0U)
- && ((cr1its & USART_CR1_TXEIE) != 0U))
- {
- if (husart->TxISR != NULL)
- {
- husart->TxISR(husart);
- }
- return;
- }
-
- /* USART in mode Transmitter (transmission end) -----------------------------*/
- if (((isrflags & USART_ISR_TC) != 0U) && ((cr1its & USART_CR1_TCIE) != 0U))
- {
- USART_EndTransmit_IT(husart);
- return;
- }
-
-}
-
-/**
- * @brief Tx Transfer completed callback.
- * @param husart USART handle.
- * @retval None
- */
-__weak void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(husart);
-
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_USART_TxCpltCallback can be implemented in the user file.
- */
-}
-
-/**
- * @brief Tx Half Transfer completed callback.
- * @param husart USART handle.
- * @retval None
- */
-__weak void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(husart);
-
- /* NOTE: This function should not be modified, when the callback is needed,
- the HAL_USART_TxHalfCpltCallback can be implemented in the user file.
- */
-}
-
-/**
- * @brief Rx Transfer completed callback.
- * @param husart USART handle.
- * @retval None
- */
-__weak void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(husart);
-
- /* NOTE: This function should not be modified, when the callback is needed,
- the HAL_USART_RxCpltCallback can be implemented in the user file.
- */
-}
-
-/**
- * @brief Rx Half Transfer completed callback.
- * @param husart USART handle.
- * @retval None
- */
-__weak void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(husart);
-
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_USART_RxHalfCpltCallback can be implemented in the user file
- */
-}
-
-/**
- * @brief Tx/Rx Transfers completed callback for the non-blocking process.
- * @param husart USART handle.
- * @retval None
- */
-__weak void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(husart);
-
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_USART_TxRxCpltCallback can be implemented in the user file
- */
-}
-
-/**
- * @brief USART error callback.
- * @param husart USART handle.
- * @retval None
- */
-__weak void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(husart);
-
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_USART_ErrorCallback can be implemented in the user file.
- */
-}
-
-/**
- * @brief USART Abort Complete callback.
- * @param husart USART handle.
- * @retval None
- */
-__weak void HAL_USART_AbortCpltCallback(USART_HandleTypeDef *husart)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(husart);
-
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_USART_AbortCpltCallback can be implemented in the user file.
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup USART_Exported_Functions_Group4 Peripheral State and Error functions
- * @brief USART Peripheral State and Error functions
- *
-@verbatim
- ==============================================================================
- ##### Peripheral State and Error functions #####
- ==============================================================================
- [..]
- This subsection provides functions allowing to :
- (+) Return the USART handle state
- (+) Return the USART handle error code
-
-@endverbatim
- * @{
- */
-
-
-/**
- * @brief Return the USART handle state.
- * @param husart pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART.
- * @retval USART handle state
- */
-HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart)
-{
- return husart->State;
-}
-
-/**
- * @brief Return the USART error code.
- * @param husart pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART.
- * @retval USART handle Error Code
- */
-uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart)
-{
- return husart->ErrorCode;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/** @defgroup USART_Private_Functions USART Private Functions
- * @{
- */
-
-/**
- * @brief Initialize the callbacks to their default values.
- * @param husart USART handle.
- * @retval none
- */
-#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
-void USART_InitCallbacksToDefault(USART_HandleTypeDef *husart)
-{
- /* Init the USART Callback settings */
- husart->TxHalfCpltCallback = HAL_USART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */
- husart->TxCpltCallback = HAL_USART_TxCpltCallback; /* Legacy weak TxCpltCallback */
- husart->RxHalfCpltCallback = HAL_USART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */
- husart->RxCpltCallback = HAL_USART_RxCpltCallback; /* Legacy weak RxCpltCallback */
- husart->TxRxCpltCallback = HAL_USART_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */
- husart->ErrorCallback = HAL_USART_ErrorCallback; /* Legacy weak ErrorCallback */
- husart->AbortCpltCallback = HAL_USART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */
-}
-#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
-
-/**
- * @brief End ongoing transfer on USART peripheral (following error detection or Transfer completion).
- * @param husart USART handle.
- * @retval None
- */
-static void USART_EndTransfer(USART_HandleTypeDef *husart)
-{
- /* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
- CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE));
- CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE);
-
- /* At end of process, restore husart->State to Ready */
- husart->State = HAL_USART_STATE_READY;
-}
-
-/**
- * @brief DMA USART transmit process complete callback.
- * @param hdma DMA handle.
- * @retval None
- */
-static void USART_DMATransmitCplt(DMA_HandleTypeDef *hdma)
-{
- USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent);
-
- /* DMA Normal mode */
- if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC))
- {
- husart->TxXferCount = 0U;
-
- if (husart->State == HAL_USART_STATE_BUSY_TX)
- {
- /* Disable the DMA transfer for transmit request by resetting the DMAT bit
- in the USART CR3 register */
- CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT);
-
- /* Enable the USART Transmit Complete Interrupt */
- __HAL_USART_ENABLE_IT(husart, USART_IT_TC);
- }
- }
- /* DMA Circular mode */
- else
- {
- if (husart->State == HAL_USART_STATE_BUSY_TX)
- {
-#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
- /* Call registered Tx Complete Callback */
- husart->TxCpltCallback(husart);
-#else
- /* Call legacy weak Tx Complete Callback */
- HAL_USART_TxCpltCallback(husart);
-#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
- }
- }
-}
-
-/**
- * @brief DMA USART transmit process half complete callback.
- * @param hdma DMA handle.
- * @retval None
- */
-static void USART_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
-{
- USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent);
-
-#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
- /* Call registered Tx Half Complete Callback */
- husart->TxHalfCpltCallback(husart);
-#else
- /* Call legacy weak Tx Half Complete Callback */
- HAL_USART_TxHalfCpltCallback(husart);
-#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
-}
-
-/**
- * @brief DMA USART receive process complete callback.
- * @param hdma DMA handle.
- * @retval None
- */
-static void USART_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
-{
- USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent);
-
- /* DMA Normal mode */
- if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC))
- {
- husart->RxXferCount = 0U;
-
- /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */
- CLEAR_BIT(husart->Instance->CR1, USART_CR1_PEIE);
- CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE);
-
- /* Disable the DMA RX transfer for the receiver request by resetting the DMAR bit
- in USART CR3 register */
- CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR);
- /* similarly, disable the DMA TX transfer that was started to provide the
- clock to the slave device */
- CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT);
-
- if (husart->State == HAL_USART_STATE_BUSY_RX)
- {
-#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
- /* Call registered Rx Complete Callback */
- husart->RxCpltCallback(husart);
-#else
- /* Call legacy weak Rx Complete Callback */
- HAL_USART_RxCpltCallback(husart);
-#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
- }
- /* The USART state is HAL_USART_STATE_BUSY_TX_RX */
- else
- {
-#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
- /* Call registered Tx Rx Complete Callback */
- husart->TxRxCpltCallback(husart);
-#else
- /* Call legacy weak Tx Rx Complete Callback */
- HAL_USART_TxRxCpltCallback(husart);
-#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
- }
- husart->State = HAL_USART_STATE_READY;
- }
- /* DMA circular mode */
- else
- {
- if (husart->State == HAL_USART_STATE_BUSY_RX)
- {
-#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
- /* Call registered Rx Complete Callback */
- husart->RxCpltCallback(husart);
-#else
- /* Call legacy weak Rx Complete Callback */
- HAL_USART_RxCpltCallback(husart);
-#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
- }
- /* The USART state is HAL_USART_STATE_BUSY_TX_RX */
- else
- {
-#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
- /* Call registered Tx Rx Complete Callback */
- husart->TxRxCpltCallback(husart);
-#else
- /* Call legacy weak Tx Rx Complete Callback */
- HAL_USART_TxRxCpltCallback(husart);
-#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
- }
- }
-}
-
-/**
- * @brief DMA USART receive process half complete callback.
- * @param hdma DMA handle.
- * @retval None
- */
-static void USART_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
-{
- USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent);
-
-#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
- /* Call registered Rx Half Complete Callback */
- husart->RxHalfCpltCallback(husart);
-#else
- /* Call legacy weak Rx Half Complete Callback */
- HAL_USART_RxHalfCpltCallback(husart);
-#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
-}
-
-/**
- * @brief DMA USART communication error callback.
- * @param hdma DMA handle.
- * @retval None
- */
-static void USART_DMAError(DMA_HandleTypeDef *hdma)
-{
- USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent);
-
- husart->RxXferCount = 0U;
- husart->TxXferCount = 0U;
- USART_EndTransfer(husart);
-
- husart->ErrorCode |= HAL_USART_ERROR_DMA;
- husart->State = HAL_USART_STATE_READY;
-
-#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
- /* Call registered Error Callback */
- husart->ErrorCallback(husart);
-#else
- /* Call legacy weak Error Callback */
- HAL_USART_ErrorCallback(husart);
-#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
-}
-
-/**
- * @brief DMA USART communication abort callback, when initiated by HAL services on Error
- * (To be called at end of DMA Abort procedure following error occurrence).
- * @param hdma DMA handle.
- * @retval None
- */
-static void USART_DMAAbortOnError(DMA_HandleTypeDef *hdma)
-{
- USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent);
- husart->RxXferCount = 0U;
- husart->TxXferCount = 0U;
-
-#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
- /* Call registered Error Callback */
- husart->ErrorCallback(husart);
-#else
- /* Call legacy weak Error Callback */
- HAL_USART_ErrorCallback(husart);
-#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
-}
-
-/**
- * @brief DMA USART Tx communication abort callback, when initiated by user
- * (To be called at end of DMA Tx Abort procedure following user abort request).
- * @note When this callback is executed, User Abort complete call back is called only if no
- * Abort still ongoing for Rx DMA Handle.
- * @param hdma DMA handle.
- * @retval None
- */
-static void USART_DMATxAbortCallback(DMA_HandleTypeDef *hdma)
-{
- USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent);
-
- husart->hdmatx->XferAbortCallback = NULL;
-
- /* Check if an Abort process is still ongoing */
- if (husart->hdmarx != NULL)
- {
- if (husart->hdmarx->XferAbortCallback != NULL)
- {
- return;
- }
- }
-
- /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */
- husart->TxXferCount = 0U;
- husart->RxXferCount = 0U;
-
- /* Reset errorCode */
- husart->ErrorCode = HAL_USART_ERROR_NONE;
-
- /* Clear the Error flags in the ICR register */
- __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_OREF | USART_CLEAR_NEF | USART_CLEAR_PEF | USART_CLEAR_FEF);
-
- /* Restore husart->State to Ready */
- husart->State = HAL_USART_STATE_READY;
-
- /* Call user Abort complete callback */
-#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
- /* Call registered Abort Complete Callback */
- husart->AbortCpltCallback(husart);
-#else
- /* Call legacy weak Abort Complete Callback */
- HAL_USART_AbortCpltCallback(husart);
-#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
-
-}
-
-
-/**
- * @brief DMA USART Rx communication abort callback, when initiated by user
- * (To be called at end of DMA Rx Abort procedure following user abort request).
- * @note When this callback is executed, User Abort complete call back is called only if no
- * Abort still ongoing for Tx DMA Handle.
- * @param hdma DMA handle.
- * @retval None
- */
-static void USART_DMARxAbortCallback(DMA_HandleTypeDef *hdma)
-{
- USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent);
-
- husart->hdmarx->XferAbortCallback = NULL;
-
- /* Check if an Abort process is still ongoing */
- if (husart->hdmatx != NULL)
- {
- if (husart->hdmatx->XferAbortCallback != NULL)
- {
- return;
- }
- }
-
- /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */
- husart->TxXferCount = 0U;
- husart->RxXferCount = 0U;
-
- /* Reset errorCode */
- husart->ErrorCode = HAL_USART_ERROR_NONE;
-
- /* Clear the Error flags in the ICR register */
- __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_OREF | USART_CLEAR_NEF | USART_CLEAR_PEF | USART_CLEAR_FEF);
-
- /* Restore husart->State to Ready */
- husart->State = HAL_USART_STATE_READY;
-
- /* Call user Abort complete callback */
-#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
- /* Call registered Abort Complete Callback */
- husart->AbortCpltCallback(husart);
-#else
- /* Call legacy weak Abort Complete Callback */
- HAL_USART_AbortCpltCallback(husart);
-#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
-}
-
-
-/**
- * @brief Handle USART Communication Timeout.
- * @param husart USART handle.
- * @param Flag Specifies the USART flag to check.
- * @param Status the Flag status (SET or RESET).
- * @param Tickstart Tick start value
- * @param Timeout timeout duration.
- * @retval HAL status
- */
-static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status,
- uint32_t Tickstart, uint32_t Timeout)
-{
- /* Wait until flag is set */
- while ((__HAL_USART_GET_FLAG(husart, Flag) ? SET : RESET) == Status)
- {
- /* Check for the Timeout */
- if (Timeout != HAL_MAX_DELAY)
- {
- if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U))
- {
- husart->State = HAL_USART_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(husart);
-
- return HAL_TIMEOUT;
- }
- }
- }
- return HAL_OK;
-}
-
-/**
- * @brief Configure the USART peripheral.
- * @param husart USART handle.
- * @retval HAL status
- */
-static HAL_StatusTypeDef USART_SetConfig(USART_HandleTypeDef *husart)
-{
- uint32_t tmpreg;
- USART_ClockSourceTypeDef clocksource;
- HAL_StatusTypeDef ret = HAL_OK;
- uint16_t brrtemp;
- uint32_t usartdiv = 0x00000000;
- uint32_t pclk;
-
- /* Check the parameters */
- assert_param(IS_USART_POLARITY(husart->Init.CLKPolarity));
- assert_param(IS_USART_PHASE(husart->Init.CLKPhase));
- assert_param(IS_USART_LASTBIT(husart->Init.CLKLastBit));
- assert_param(IS_USART_BAUDRATE(husart->Init.BaudRate));
- assert_param(IS_USART_WORD_LENGTH(husart->Init.WordLength));
- assert_param(IS_USART_STOPBITS(husart->Init.StopBits));
- assert_param(IS_USART_PARITY(husart->Init.Parity));
- assert_param(IS_USART_MODE(husart->Init.Mode));
-
- /*-------------------------- USART CR1 Configuration -----------------------*/
- /* Clear M, PCE, PS, TE and RE bits and configure
- * the USART Word Length, Parity and Mode:
- * set the M bits according to husart->Init.WordLength value
- * set PCE and PS bits according to husart->Init.Parity value
- * set TE and RE bits according to husart->Init.Mode value
- * force OVER8 to 1 to allow to reach the maximum speed (Fclock/8) */
- tmpreg = (uint32_t)husart->Init.WordLength | husart->Init.Parity | husart->Init.Mode | USART_CR1_OVER8;
- MODIFY_REG(husart->Instance->CR1, USART_CR1_FIELDS, tmpreg);
-
- /*---------------------------- USART CR2 Configuration ---------------------*/
- /* Clear and configure the USART Clock, CPOL, CPHA, LBCL and STOP bits:
- * set CPOL bit according to husart->Init.CLKPolarity value
- * set CPHA bit according to husart->Init.CLKPhase value
- * set LBCL bit according to husart->Init.CLKLastBit value (used in SPI master mode only)
- * set STOP[13:12] bits according to husart->Init.StopBits value */
- tmpreg = (uint32_t)(USART_CLOCK_ENABLE);
- tmpreg |= (uint32_t)husart->Init.CLKLastBit;
- tmpreg |= ((uint32_t)husart->Init.CLKPolarity | (uint32_t)husart->Init.CLKPhase);
- tmpreg |= (uint32_t)husart->Init.StopBits;
- MODIFY_REG(husart->Instance->CR2, USART_CR2_FIELDS, tmpreg);
-
-
- /*-------------------------- USART BRR Configuration -----------------------*/
- /* BRR is filled-up according to OVER8 bit setting which is forced to 1 */
- USART_GETCLOCKSOURCE(husart, clocksource);
-
- switch (clocksource)
- {
- case USART_CLOCKSOURCE_PCLK1:
- pclk = HAL_RCC_GetPCLK1Freq();
- usartdiv = (uint32_t)(USART_DIV_SAMPLING8(pclk, husart->Init.BaudRate));
- break;
- case USART_CLOCKSOURCE_HSI:
- usartdiv = (uint32_t)(USART_DIV_SAMPLING8(HSI_VALUE, husart->Init.BaudRate));
- break;
- case USART_CLOCKSOURCE_SYSCLK:
- pclk = HAL_RCC_GetSysClockFreq();
- usartdiv = (uint32_t)(USART_DIV_SAMPLING8(pclk, husart->Init.BaudRate));
- break;
- case USART_CLOCKSOURCE_LSE:
- usartdiv = (uint32_t)(USART_DIV_SAMPLING8(LSE_VALUE, husart->Init.BaudRate));
- break;
- default:
- ret = HAL_ERROR;
- break;
- }
-
- /* USARTDIV must be greater than or equal to 0d16 and smaller than or equal to ffff */
- if ((usartdiv >= USART_BRR_MIN) && (usartdiv <= USART_BRR_MAX))
- {
- brrtemp = (uint16_t)(usartdiv & 0xFFF0U);
- brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U);
- husart->Instance->BRR = brrtemp;
- }
- else
- {
- ret = HAL_ERROR;
- }
-
-
- /* Clear ISR function pointers */
- husart->RxISR = NULL;
- husart->TxISR = NULL;
-
- return ret;
-}
-
-/**
- * @brief Check the USART Idle State.
- * @param husart USART handle.
- * @retval HAL status
- */
-static HAL_StatusTypeDef USART_CheckIdleState(USART_HandleTypeDef *husart)
-{
- uint32_t tickstart;
-
- /* Initialize the USART ErrorCode */
- husart->ErrorCode = HAL_USART_ERROR_NONE;
-
- /* Init tickstart for timeout managment*/
- tickstart = HAL_GetTick();
-
- /* Check if the Transmitter is enabled */
- if ((husart->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE)
- {
- /* Wait until TEACK flag is set */
- if (USART_WaitOnFlagUntilTimeout(husart, USART_ISR_TEACK, RESET, tickstart, USART_TEACK_REACK_TIMEOUT) != HAL_OK)
- {
- /* Timeout occurred */
- return HAL_TIMEOUT;
- }
- }
- /* Check if the Receiver is enabled */
- if ((husart->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE)
- {
- /* Wait until REACK flag is set */
- if (USART_WaitOnFlagUntilTimeout(husart, USART_ISR_REACK, RESET, tickstart, USART_TEACK_REACK_TIMEOUT) != HAL_OK)
- {
- /* Timeout occurred */
- return HAL_TIMEOUT;
- }
- }
-
- /* Initialize the USART state*/
- husart->State = HAL_USART_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(husart);
-
- return HAL_OK;
-}
-
-/**
- * @brief Simplex send an amount of data in non-blocking mode.
- * @note Function called under interruption only, once
- * interruptions have been enabled by HAL_USART_Transmit_IT().
- * @note The USART errors are not managed to avoid the overrun error.
- * @note ISR function executed when data word length is less than 9 bits long.
- * @param husart USART handle.
- * @retval None
- */
-static void USART_TxISR_8BIT(USART_HandleTypeDef *husart)
-{
- const HAL_USART_StateTypeDef state = husart->State;
-
- /* Check that a Tx process is ongoing */
- if ((state == HAL_USART_STATE_BUSY_TX) ||
- (state == HAL_USART_STATE_BUSY_TX_RX))
- {
- if (husart->TxXferCount == 0U)
- {
- /* Disable the USART Transmit data register empty interrupt */
- __HAL_USART_DISABLE_IT(husart, USART_IT_TXE);
-
- /* Enable the USART Transmit Complete Interrupt */
- __HAL_USART_ENABLE_IT(husart, USART_IT_TC);
- }
- else
- {
- husart->Instance->TDR = (uint8_t)(*husart->pTxBuffPtr & (uint8_t)0xFF);
- husart->pTxBuffPtr++;
- husart->TxXferCount--;
- }
- }
-}
-
-/**
- * @brief Simplex send an amount of data in non-blocking mode.
- * @note Function called under interruption only, once
- * interruptions have been enabled by HAL_USART_Transmit_IT().
- * @note The USART errors are not managed to avoid the overrun error.
- * @note ISR function executed when data word length is 9 bits long.
- * @param husart USART handle.
- * @retval None
- */
-static void USART_TxISR_16BIT(USART_HandleTypeDef *husart)
-{
- const HAL_USART_StateTypeDef state = husart->State;
- uint16_t *tmp;
-
- if ((state == HAL_USART_STATE_BUSY_TX) ||
- (state == HAL_USART_STATE_BUSY_TX_RX))
- {
- if (husart->TxXferCount == 0U)
- {
- /* Disable the USART Transmit data register empty interrupt */
- __HAL_USART_DISABLE_IT(husart, USART_IT_TXE);
-
- /* Enable the USART Transmit Complete Interrupt */
- __HAL_USART_ENABLE_IT(husart, USART_IT_TC);
- }
- else
- {
- tmp = (uint16_t *) husart->pTxBuffPtr;
- husart->Instance->TDR = (uint16_t)(*tmp & 0x01FFU);
- husart->pTxBuffPtr += 2U;
- husart->TxXferCount--;
- }
- }
-}
-
-
-/**
- * @brief Wraps up transmission in non-blocking mode.
- * @param husart Pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @retval None
- */
-static void USART_EndTransmit_IT(USART_HandleTypeDef *husart)
-{
- /* Disable the USART Transmit Complete Interrupt */
- __HAL_USART_DISABLE_IT(husart, USART_IT_TC);
-
- /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */
- __HAL_USART_DISABLE_IT(husart, USART_IT_ERR);
-
- /* Clear TxISR function pointer */
- husart->TxISR = NULL;
-
- if (husart->State == HAL_USART_STATE_BUSY_TX)
- {
- /* Clear overrun flag and discard the received data */
- __HAL_USART_CLEAR_OREFLAG(husart);
- __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST);
-
- /* Tx process is completed, restore husart->State to Ready */
- husart->State = HAL_USART_STATE_READY;
-
-#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
- /* Call registered Tx Complete Callback */
- husart->TxCpltCallback(husart);
-#else
- /* Call legacy weak Tx Complete Callback */
- HAL_USART_TxCpltCallback(husart);
-#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
- }
- else if (husart->RxXferCount == 0U)
- {
- /* TxRx process is completed, restore husart->State to Ready */
- husart->State = HAL_USART_STATE_READY;
-
-#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
- /* Call registered Tx Rx Complete Callback */
- husart->TxRxCpltCallback(husart);
-#else
- /* Call legacy weak Tx Rx Complete Callback */
- HAL_USART_TxRxCpltCallback(husart);
-#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
- }
- else
- {
- /* Nothing to do */
- }
-}
-
-
-/**
- * @brief Simplex receive an amount of data in non-blocking mode.
- * @note Function called under interruption only, once
- * interruptions have been enabled by HAL_USART_Receive_IT().
- * @note ISR function executed when data word length is less than 9 bits long.
- * @param husart USART handle
- * @retval None
- */
-static void USART_RxISR_8BIT(USART_HandleTypeDef *husart)
-{
- const HAL_USART_StateTypeDef state = husart->State;
- uint16_t txdatacount;
- uint16_t uhMask = husart->Mask;
-
- if ((state == HAL_USART_STATE_BUSY_RX) ||
- (state == HAL_USART_STATE_BUSY_TX_RX))
- {
- *husart->pRxBuffPtr = (uint8_t)(husart->Instance->RDR & (uint8_t)uhMask);
- husart->pRxBuffPtr++;
- husart->RxXferCount--;
-
- if (husart->RxXferCount == 0U)
- {
- /* Disable the USART Parity Error Interrupt and RXNE interrupt*/
- CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE));
-
- /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */
- CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE);
-
- /* Clear RxISR function pointer */
- husart->RxISR = NULL;
-
- /* txdatacount is a temporary variable for MISRAC2012-Rule-13.5 */
- txdatacount = husart->TxXferCount;
-
- if (state == HAL_USART_STATE_BUSY_RX)
- {
-
- /* Rx process is completed, restore husart->State to Ready */
- husart->State = HAL_USART_STATE_READY;
-
-#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
- /* Call registered Rx Complete Callback */
- husart->RxCpltCallback(husart);
-#else
- /* Call legacy weak Rx Complete Callback */
- HAL_USART_RxCpltCallback(husart);
-#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
- }
- else if ((READ_BIT(husart->Instance->CR1, USART_CR1_TCIE) != USART_CR1_TCIE) &&
- (txdatacount == 0U))
- {
- /* TxRx process is completed, restore husart->State to Ready */
- husart->State = HAL_USART_STATE_READY;
-
-#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
- /* Call registered Tx Rx Complete Callback */
- husart->TxRxCpltCallback(husart);
-#else
- /* Call legacy weak Tx Rx Complete Callback */
- HAL_USART_TxRxCpltCallback(husart);
-#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
- }
- else
- {
- /* Nothing to do */
- }
- }
- else if (state == HAL_USART_STATE_BUSY_RX)
- {
- /* Send dummy byte in order to generate the clock for the Slave to Send the next data */
- husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF);
- }
- else
- {
- /* Nothing to do */
- }
- }
-}
-
-/**
- * @brief Simplex receive an amount of data in non-blocking mode.
- * @note Function called under interruption only, once
- * interruptions have been enabled by HAL_USART_Receive_IT().
- * @note ISR function executed when data word length is 9 bits long.
- * @param husart USART handle
- * @retval None
- */
-static void USART_RxISR_16BIT(USART_HandleTypeDef *husart)
-{
- const HAL_USART_StateTypeDef state = husart->State;
- uint16_t txdatacount;
- uint16_t *tmp;
- uint16_t uhMask = husart->Mask;
-
- if ((state == HAL_USART_STATE_BUSY_RX) ||
- (state == HAL_USART_STATE_BUSY_TX_RX))
- {
- tmp = (uint16_t *) husart->pRxBuffPtr;
- *tmp = (uint16_t)(husart->Instance->RDR & uhMask);
- husart->pRxBuffPtr += 2U;
- husart->RxXferCount--;
-
- if (husart->RxXferCount == 0U)
- {
- /* Disable the USART Parity Error Interrupt and RXNE interrupt*/
- CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE));
-
- /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */
- CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE);
-
- /* Clear RxISR function pointer */
- husart->RxISR = NULL;
-
- /* txdatacount is a temporary variable for MISRAC2012-Rule-13.5 */
- txdatacount = husart->TxXferCount;
-
- if (state == HAL_USART_STATE_BUSY_RX)
- {
-
- /* Rx process is completed, restore husart->State to Ready */
- husart->State = HAL_USART_STATE_READY;
-
-#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
- /* Call registered Rx Complete Callback */
- husart->RxCpltCallback(husart);
-#else
- /* Call legacy weak Rx Complete Callback */
- HAL_USART_RxCpltCallback(husart);
-#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
- }
- else if ((READ_BIT(husart->Instance->CR1, USART_CR1_TCIE) != USART_CR1_TCIE) &&
- (txdatacount == 0U))
- {
- /* TxRx process is completed, restore husart->State to Ready */
- husart->State = HAL_USART_STATE_READY;
-
-#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
- /* Call registered Tx Rx Complete Callback */
- husart->TxRxCpltCallback(husart);
-#else
- /* Call legacy weak Tx Rx Complete Callback */
- HAL_USART_TxRxCpltCallback(husart);
-#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
- }
- else
- {
- /* Nothing to do */
- }
- }
- else if (state == HAL_USART_STATE_BUSY_RX)
- {
- /* Send dummy byte in order to generate the clock for the Slave to Send the next data */
- husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF);
- }
- else
- {
- /* Nothing to do */
- }
- }
-}
-
-
-/**
- * @}
- */
-
-#endif /* HAL_USART_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|