1 files changed, 0 insertions, 168 deletions
diff --git a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_timebase_tim_template.c b/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_timebase_tim_template.c
deleted file mode 100644
index cf8a60b..0000000
--- a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_timebase_tim_template.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f0xx_hal_timebase_tim_template.c 
-  * @brief   HAL time base based on the hardware TIM Template.
-  *    
-  *          This file override the native HAL time base functions (defined as weak)
-  *          the TIM time base:
-  *           + Intializes the TIM peripheral generate a Period elapsed Event each 1ms
-  *           + HAL_IncTick is called inside HAL_TIM_PeriodElapsedCallback ie each 1ms
-  * 
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_hal.h"
-
-/** @addtogroup STM32F0xx_HAL_Driver
-  * @{
-  */
-
-/** @addtogroup HAL_TimeBase_TIM
-  * @{
-  */ 
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-TIM_HandleTypeDef        TimHandle;
-/* Private function prototypes -----------------------------------------------*/
-void TIM6_DAC_IRQHandler(void);
-/* Private functions ---------------------------------------------------------*/
-
-/**
-  * @brief  This function configures the TIM6 as a time base source. 
-  *         The time source is configured  to have 1ms time base with a dedicated 
-  *         Tick interrupt priority. 
-  * @note   This function is called  automatically at the beginning of program after
-  *         reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig(). 
-  * @param  TickPriority Tick interrupt priority.
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority)
-{
-  RCC_ClkInitTypeDef    clkconfig;
-  uint32_t              uwTimclock, uwAPB1Prescaler = 0U;
-  uint32_t              uwPrescalerValue = 0U;
-  uint32_t              pFLatency;
-  
-    /*Configure the TIM6 IRQ priority */
-  HAL_NVIC_SetPriority(TIM6_DAC_IRQn, TickPriority ,0U);
-  
-  /* Enable the TIM6 global Interrupt */
-  HAL_NVIC_EnableIRQ(TIM6_DAC_IRQn);
-  
-  /* Enable TIM6 clock */
-  __HAL_RCC_TIM6_CLK_ENABLE();
-  
-  /* Get clock configuration */
-  HAL_RCC_GetClockConfig(&clkconfig, &pFLatency);
-  
-  /* Get APB1 prescaler */
-  uwAPB1Prescaler = clkconfig.APB1CLKDivider;
-  
-  /* Compute TIM6 clock */
-  if (uwAPB1Prescaler == RCC_HCLK_DIV1) 
-  {
-    uwTimclock = HAL_RCC_GetPCLK1Freq();
-  }
-  else
-  {
-    uwTimclock = 2*HAL_RCC_GetPCLK1Freq();
-  }
-  
-  /* Compute the prescaler value to have TIM6 counter clock equal to 1MHz */
-  uwPrescalerValue = (uint32_t) ((uwTimclock / 1000000U) - 1U);
-  
-  /* Initialize TIM6 */
-  TimHandle.Instance = TIM6;
-  
-  /* Initialize TIMx peripheral as follow:
-  + Period = [(TIM6CLK/1000) - 1]. to have a (1/1000) s time base.
-  + Prescaler = (uwTimclock/1000000 - 1) to have a 1MHz counter clock.
-  + ClockDivision = 0
-  + Counter direction = Up
-  */
-  TimHandle.Init.Period = (1000000U / 1000U) - 1U;
-  TimHandle.Init.Prescaler = uwPrescalerValue;
-  TimHandle.Init.ClockDivision = 0U;
-  TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
-  TimHandle.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
-  if(HAL_TIM_Base_Init(&TimHandle) == HAL_OK)
-  {
-    /* Start the TIM time Base generation in interrupt mode */
-    return HAL_TIM_Base_Start_IT(&TimHandle);
-  }
-  
-  /* Return function status */
-  return HAL_ERROR;
-}
-
-/**
-  * @brief  Suspend Tick increment.
-  * @note   Disable the tick increment by disabling TIM6 update interrupt.
-  * @param  None
-  * @retval None
-  */
-void HAL_SuspendTick(void)
-{
-  /* Disable TIM6 update Interrupt */
-  __HAL_TIM_DISABLE_IT(&TimHandle, TIM_IT_UPDATE);
-}
-
-/**
-  * @brief  Resume Tick increment.
-  * @note   Enable the tick increment by Enabling TIM6 update interrupt.
-  * @param  None
-  * @retval None
-  */
-void HAL_ResumeTick(void)
-{
-  /* Enable TIM6 Update interrupt */
-  __HAL_TIM_ENABLE_IT(&TimHandle, TIM_IT_UPDATE);
-}
-
-/**
-  * @brief  Period elapsed callback in non blocking mode
-  * @note   This function is called  when TIM6 interrupt took place, inside
-  * HAL_TIM_IRQHandler(). It makes a direct call to HAL_IncTick() to increment
-  * a global variable "uwTick" used as application time base.
-  * @param  htim TIM handle
-  * @retval None
-  */
-void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
-{
-  HAL_IncTick();
-}
-
-/**
-  * @brief  This function handles TIM interrupt request.
-  * @param  None
-  * @retval None
-  */
-void TIM6_DAC_IRQHandler(void)
-{
-  HAL_TIM_IRQHandler(&TimHandle);
-}
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */ 
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/