diff options
Diffstat (limited to 'fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_smartcard_ex.c')
| -rw-r--r-- | fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_smartcard_ex.c | 204 |
1 files changed, 0 insertions, 204 deletions
diff --git a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_smartcard_ex.c b/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_smartcard_ex.c deleted file mode 100644 index 8f60497..0000000 --- a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_smartcard_ex.c +++ /dev/null @@ -1,204 +0,0 @@ -/**
- ******************************************************************************
- * @file stm32f0xx_hal_smartcard_ex.c
- * @author MCD Application Team
- * @brief SMARTCARD HAL module driver.
- * This file provides extended firmware functions to manage the following
- * functionalities of the SmartCard.
- * + Initialization and de-initialization functions
- * + Peripheral Control functions
- *
- @verbatim
- =============================================================================
- ##### SMARTCARD peripheral extended features #####
- =============================================================================
- [..]
- The Extended SMARTCARD HAL driver can be used as follows:
-
- (#) After having configured the SMARTCARD basic features with HAL_SMARTCARD_Init(),
- then program SMARTCARD advanced features if required (TX/RX pins swap, TimeOut,
- auto-retry counter,...) in the hsmartcard AdvancedInit structure.
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_hal.h"
-
-/** @addtogroup STM32F0xx_HAL_Driver
- * @{
- */
-
-/** @defgroup SMARTCARDEx SMARTCARDEx
- * @brief SMARTCARD Extended HAL module driver
- * @{
- */
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macros ------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup SMARTCARDEx_Exported_Functions SMARTCARD Extended Exported Functions
- * @{
- */
-
-/** @defgroup SMARTCARDEx_Exported_Functions_Group1 Extended Peripheral Control functions
- * @brief Extended control functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral Control functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to initialize the SMARTCARD.
- (+) HAL_SMARTCARDEx_BlockLength_Config() API allows to configure the Block Length on the fly
- (+) HAL_SMARTCARDEx_TimeOut_Config() API allows to configure the receiver timeout value on the fly
- (+) HAL_SMARTCARDEx_EnableReceiverTimeOut() API enables the receiver timeout feature
- (+) HAL_SMARTCARDEx_DisableReceiverTimeOut() API disables the receiver timeout feature
-
-@endverbatim
- * @{
- */
-
-/** @brief Update on the fly the SMARTCARD block length in RTOR register.
- * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
- * the configuration information for the specified SMARTCARD module.
- * @param BlockLength SMARTCARD block length (8-bit long at most)
- * @retval None
- */
-void HAL_SMARTCARDEx_BlockLength_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t BlockLength)
-{
- MODIFY_REG(hsmartcard->Instance->RTOR, USART_RTOR_BLEN, ((uint32_t)BlockLength << USART_RTOR_BLEN_Pos));
-}
-
-/** @brief Update on the fly the receiver timeout value in RTOR register.
- * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
- * the configuration information for the specified SMARTCARD module.
- * @param TimeOutValue receiver timeout value in number of baud blocks. The timeout
- * value must be less or equal to 0x0FFFFFFFF.
- * @retval None
- */
-void HAL_SMARTCARDEx_TimeOut_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t TimeOutValue)
-{
- assert_param(IS_SMARTCARD_TIMEOUT_VALUE(hsmartcard->Init.TimeOutValue));
- MODIFY_REG(hsmartcard->Instance->RTOR, USART_RTOR_RTO, TimeOutValue);
-}
-
-/** @brief Enable the SMARTCARD receiver timeout feature.
- * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
- * the configuration information for the specified SMARTCARD module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SMARTCARDEx_EnableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard)
-{
- if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY)
- {
- /* Process Locked */
- __HAL_LOCK(hsmartcard);
-
- hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY;
-
- /* Set the USART RTOEN bit */
- SET_BIT(hsmartcard->Instance->CR2, USART_CR2_RTOEN);
-
- hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hsmartcard);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/** @brief Disable the SMARTCARD receiver timeout feature.
- * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
- * the configuration information for the specified SMARTCARD module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SMARTCARDEx_DisableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard)
-{
- if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY)
- {
- /* Process Locked */
- __HAL_LOCK(hsmartcard);
-
- hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY;
-
- /* Clear the USART RTOEN bit */
- CLEAR_BIT(hsmartcard->Instance->CR2, USART_CR2_RTOEN);
-
- hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hsmartcard);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @}
- */
-
-/** @defgroup SMARTCARDEx_Exported_Functions_Group2 Extended Peripheral IO operation functions
- * @brief SMARTCARD Transmit and Receive functions
- *
-@verbatim
- ===============================================================================
- ##### IO operation functions #####
- ===============================================================================
- [..]
-@endverbatim
- * @{
- */
-
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-/** @defgroup SMARTCARDEx_Private_Functions SMARTCARD Extended Private Functions
- * @{
- */
-
-/**
- * @}
- */
-
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|