diff options
Diffstat (limited to 'fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c')
| -rw-r--r-- | fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c | 454 |
1 files changed, 0 insertions, 454 deletions
diff --git a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c b/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c deleted file mode 100644 index 558d869..0000000 --- a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c +++ /dev/null @@ -1,454 +0,0 @@ -/**
- ******************************************************************************
- * @file stm32f0xx_hal_pwr.c
- * @author MCD Application Team
- * @brief PWR HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the Power Controller (PWR) peripheral:
- * + Initialization/de-initialization function
- * + Peripheral Control function
- *
- @verbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_hal.h"
-
-/** @addtogroup STM32F0xx_HAL_Driver
- * @{
- */
-
-/** @defgroup PWR PWR
- * @brief PWR HAL module driver
- * @{
- */
-
-#ifdef HAL_PWR_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/** @defgroup PWR_Exported_Functions PWR Exported Functions
- * @{
- */
-
-/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and de-initialization functions
- *
-@verbatim
- ===============================================================================
- ##### Initialization and de-initialization functions #####
- ===============================================================================
- [..]
- After reset, the backup domain (RTC registers, RTC backup data
- registers) is protected against possible unwanted
- write accesses.
- To enable access to the RTC Domain and RTC registers, proceed as follows:
- (+) Enable the Power Controller (PWR) APB1 interface clock using the
- __HAL_RCC_PWR_CLK_ENABLE() macro.
- (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Deinitializes the PWR peripheral registers to their default reset values.
- * @retval None
- */
-void HAL_PWR_DeInit(void)
-{
- __HAL_RCC_PWR_FORCE_RESET();
- __HAL_RCC_PWR_RELEASE_RESET();
-}
-
-/**
- * @brief Enables access to the backup domain (RTC registers, RTC
- * backup data registers when present).
- * @note If the HSE divided by 32 is used as the RTC clock, the
- * Backup Domain Access should be kept enabled.
- * @retval None
- */
-void HAL_PWR_EnableBkUpAccess(void)
-{
- PWR->CR |= (uint32_t)PWR_CR_DBP;
-}
-
-/**
- * @brief Disables access to the backup domain (RTC registers, RTC
- * backup data registers when present).
- * @note If the HSE divided by 32 is used as the RTC clock, the
- * Backup Domain Access should be kept enabled.
- * @retval None
- */
-void HAL_PWR_DisableBkUpAccess(void)
-{
- PWR->CR &= ~((uint32_t)PWR_CR_DBP);
-}
-
-/**
- * @}
- */
-
-/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions
- * @brief Low Power modes configuration functions
- *
-@verbatim
-
- ===============================================================================
- ##### Peripheral Control functions #####
- ===============================================================================
-
- *** WakeUp pin configuration ***
- ================================
- [..]
- (+) WakeUp pin is used to wakeup the system from Standby mode. This pin is
- forced in input pull down configuration and is active on rising edges.
- (+) There are two WakeUp pins, and up to eight Wakeup pins on STM32F07x & STM32F09x devices.
- (++)WakeUp Pin 1 on PA.00.
- (++)WakeUp Pin 2 on PC.13.
- (++)WakeUp Pin 3 on PE.06.(STM32F07x/STM32F09x)
- (++)WakeUp Pin 4 on PA.02.(STM32F07x/STM32F09x)
- (++)WakeUp Pin 5 on PC.05.(STM32F07x/STM32F09x)
- (++)WakeUp Pin 6 on PB.05.(STM32F07x/STM32F09x)
- (++)WakeUp Pin 7 on PB.15.(STM32F07x/STM32F09x)
- (++)WakeUp Pin 8 on PF.02.(STM32F07x/STM32F09x)
-
- *** Low Power modes configuration ***
- =====================================
- [..]
- The devices feature 3 low-power modes:
- (+) Sleep mode: Cortex-M0 core stopped, peripherals kept running.
- (+) Stop mode: all clocks are stopped, regulator running, regulator
- in low power mode
- (+) Standby mode: 1.2V domain powered off (mode not available on STM32F0x8 devices).
-
- *** Sleep mode ***
- ==================
- [..]
- (+) Entry:
- The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFx)
- functions with
- (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
- (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
-
- (+) Exit:
- (++) Any peripheral interrupt acknowledged by the nested vectored interrupt
- controller (NVIC) can wake up the device from Sleep mode.
-
- *** Stop mode ***
- =================
- [..]
- In Stop mode, all clocks in the 1.8V domain are stopped, the PLL, the HSI,
- and the HSE RC oscillators are disabled. Internal SRAM and register contents
- are preserved.
- The voltage regulator can be configured either in normal or low-power mode.
- To minimize the consumption.
-
- (+) Entry:
- The Stop mode is entered using the HAL_PWR_EnterSTOPMode(PWR_MAINREGULATOR_ON, PWR_STOPENTRY_WFI )
- function with:
- (++) Main regulator ON.
- (++) Low Power regulator ON.
- (++) PWR_STOPENTRY_WFI: enter STOP mode with WFI instruction
- (++) PWR_STOPENTRY_WFE: enter STOP mode with WFE instruction
- (+) Exit:
- (++) Any EXTI Line (Internal or External) configured in Interrupt/Event mode.
- (++) Some specific communication peripherals (CEC, USART, I2C) interrupts,
- when programmed in wakeup mode (the peripheral must be
- programmed in wakeup mode and the corresponding interrupt vector
- must be enabled in the NVIC)
-
- *** Standby mode ***
- ====================
- [..]
- The Standby mode allows to achieve the lowest power consumption. It is based
- on the Cortex-M0 deep sleep mode, with the voltage regulator disabled.
- The 1.8V domain is consequently powered off. The PLL, the HSI oscillator and
- the HSE oscillator are also switched off. SRAM and register contents are lost
- except for the RTC registers, RTC backup registers and Standby circuitry.
- The voltage regulator is OFF.
-
- (+) Entry:
- (++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function.
- (+) Exit:
- (++) WKUP pin rising edge, RTC alarm (Alarm A), RTC wakeup,
- tamper event, time-stamp event, external reset in NRST pin, IWDG reset.
-
- *** Auto-wakeup (AWU) from low-power mode ***
- =============================================
- [..]
- The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC
- Wakeup event, a tamper event, a time-stamp event, or a comparator event,
- without depending on an external interrupt (Auto-wakeup mode).
-
- (+) RTC auto-wakeup (AWU) from the Stop and Standby modes
-
- (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to
- configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function.
-
- (++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it
- is necessary to configure the RTC to detect the tamper or time stamp event using the
- HAL_RTC_SetTimeStamp_IT() or HAL_RTC_SetTamper_IT() functions.
-
- (++) To wake up from the Stop mode with an RTC WakeUp event, it is necessary to
- configure the RTC to generate the RTC WakeUp event using the HAL_RTC_SetWakeUpTimer_IT() function.
-
- (+) Comparator auto-wakeup (AWU) from the Stop mode
-
- (++) To wake up from the Stop mode with a comparator wakeup event, it is necessary to:
- (+++) Configure the EXTI Line associated with the comparator (example EXTI Line 22 for comparator 2)
- to be sensitive to to the selected edges (falling, rising or falling
- and rising) (Interrupt or Event modes) using the EXTI_Init() function.
- (+++) Configure the comparator to generate the event.
-@endverbatim
- * @{
- */
-
-/**
- * @brief Enables the WakeUp PINx functionality.
- * @param WakeUpPinx Specifies the Power Wake-Up pin to enable.
- * This parameter can be value of :
- * @ref PWREx_WakeUp_Pins
- * @retval None
- */
-void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx)
-{
- /* Check the parameters */
- assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
- /* Enable the EWUPx pin */
- SET_BIT(PWR->CSR, WakeUpPinx);
-}
-
-/**
- * @brief Disables the WakeUp PINx functionality.
- * @param WakeUpPinx Specifies the Power Wake-Up pin to disable.
- * This parameter can be values of :
- * @ref PWREx_WakeUp_Pins
- * @retval None
- */
-void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx)
-{
- /* Check the parameters */
- assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
- /* Disable the EWUPx pin */
- CLEAR_BIT(PWR->CSR, WakeUpPinx);
-}
-
-/**
- * @brief Enters Sleep mode.
- * @note In Sleep mode, all I/O pins keep the same state as in Run mode.
- * @param Regulator Specifies the regulator state in SLEEP mode.
- * On STM32F0 devices, this parameter is a dummy value and it is ignored
- * as regulator can't be modified in this mode. Parameter is kept for platform
- * compatibility.
- * @param SLEEPEntry Specifies if SLEEP mode is entered with WFI or WFE instruction.
- * When WFI entry is used, tick interrupt have to be disabled if not desired as
- * the interrupt wake up source.
- * This parameter can be one of the following values:
- * @arg PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
- * @arg PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
- * @retval None
- */
-void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry)
-{
- /* Check the parameters */
- assert_param(IS_PWR_REGULATOR(Regulator));
- assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry));
-
- /* Clear SLEEPDEEP bit of Cortex System Control Register */
- SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk);
-
- /* Select SLEEP mode entry -------------------------------------------------*/
- if(SLEEPEntry == PWR_SLEEPENTRY_WFI)
- {
- /* Request Wait For Interrupt */
- __WFI();
- }
- else
- {
- /* Request Wait For Event */
- __SEV();
- __WFE();
- __WFE();
- }
-}
-
-/**
- * @brief Enters STOP mode.
- * @note In Stop mode, all I/O pins keep the same state as in Run mode.
- * @note When exiting Stop mode by issuing an interrupt or a wakeup event,
- * the HSI RC oscillator is selected as system clock.
- * @note When the voltage regulator operates in low power mode, an additional
- * startup delay is incurred when waking up from Stop mode.
- * By keeping the internal regulator ON during Stop mode, the consumption
- * is higher although the startup time is reduced.
- * @param Regulator Specifies the regulator state in STOP mode.
- * This parameter can be one of the following values:
- * @arg PWR_MAINREGULATOR_ON: STOP mode with regulator ON
- * @arg PWR_LOWPOWERREGULATOR_ON: STOP mode with low power regulator ON
- * @param STOPEntry specifies if STOP mode in entered with WFI or WFE instruction.
- * This parameter can be one of the following values:
- * @arg PWR_STOPENTRY_WFI:Enter STOP mode with WFI instruction
- * @arg PWR_STOPENTRY_WFE: Enter STOP mode with WFE instruction
- * @retval None
- */
-void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
-{
- uint32_t tmpreg = 0;
-
- /* Check the parameters */
- assert_param(IS_PWR_REGULATOR(Regulator));
- assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
-
- /* Select the regulator state in STOP mode ---------------------------------*/
- tmpreg = PWR->CR;
-
- /* Clear PDDS and LPDS bits */
- tmpreg &= (uint32_t)~(PWR_CR_PDDS | PWR_CR_LPDS);
-
- /* Set LPDS bit according to Regulator value */
- tmpreg |= Regulator;
-
- /* Store the new value */
- PWR->CR = tmpreg;
-
- /* Set SLEEPDEEP bit of Cortex System Control Register */
- SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
-
- /* Select STOP mode entry --------------------------------------------------*/
- if(STOPEntry == PWR_STOPENTRY_WFI)
- {
- /* Request Wait For Interrupt */
- __WFI();
- }
- else
- {
- /* Request Wait For Event */
- __SEV();
- __WFE();
- __WFE();
- }
-
- /* Reset SLEEPDEEP bit of Cortex System Control Register */
- SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk);
-}
-
-/**
- * @brief Enters STANDBY mode.
- * @note In Standby mode, all I/O pins are high impedance except for:
- * - Reset pad (still available)
- * - RTC alternate function pins if configured for tamper, time-stamp, RTC
- * Alarm out, or RTC clock calibration out.
- * - WKUP pins if enabled.
- * STM32F0x8 devices, the Stop mode is available, but it is
- * aningless to distinguish between voltage regulator in Low power
- * mode and voltage regulator in Run mode because the regulator
- * not used and the core is supplied directly from an external source.
- * Consequently, the Standby mode is not available on those devices.
- * @retval None
- */
-void HAL_PWR_EnterSTANDBYMode(void)
-{
- /* Select STANDBY mode */
- PWR->CR |= (uint32_t)PWR_CR_PDDS;
-
- /* Set SLEEPDEEP bit of Cortex System Control Register */
- SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
-
- /* This option is used to ensure that store operations are completed */
-#if defined ( __CC_ARM)
- __force_stores();
-#endif
- /* Request Wait For Interrupt */
- __WFI();
-}
-
-/**
- * @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode.
- * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor
- * re-enters SLEEP mode when an interruption handling is over.
- * Setting this bit is useful when the processor is expected to run only on
- * interruptions handling.
- * @retval None
- */
-void HAL_PWR_EnableSleepOnExit(void)
-{
- /* Set SLEEPONEXIT bit of Cortex System Control Register */
- SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
-}
-
-
-/**
- * @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode.
- * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor
- * re-enters SLEEP mode when an interruption handling is over.
- * @retval None
- */
-void HAL_PWR_DisableSleepOnExit(void)
-{
- /* Clear SLEEPONEXIT bit of Cortex System Control Register */
- CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
-}
-
-
-
-/**
- * @brief Enables CORTEX M4 SEVONPEND bit.
- * @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes
- * WFE to wake up when an interrupt moves from inactive to pended.
- * @retval None
- */
-void HAL_PWR_EnableSEVOnPend(void)
-{
- /* Set SEVONPEND bit of Cortex System Control Register */
- SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
-}
-
-
-/**
- * @brief Disables CORTEX M4 SEVONPEND bit.
- * @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes
- * WFE to wake up when an interrupt moves from inactive to pended.
- * @retval None
- */
-void HAL_PWR_DisableSEVOnPend(void)
-{
- /* Clear SEVONPEND bit of Cortex System Control Register */
- CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* HAL_PWR_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|