diff options
Diffstat (limited to 'fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pcd_ex.c')
| -rw-r--r-- | fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pcd_ex.c | 338 |
1 files changed, 338 insertions, 0 deletions
diff --git a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pcd_ex.c b/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pcd_ex.c new file mode 100644 index 0000000..26dd51f --- /dev/null +++ b/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pcd_ex.c @@ -0,0 +1,338 @@ +/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_pcd_ex.c
+ * @author MCD Application Team
+ * @brief PCD Extended HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the USB Peripheral Controller:
+ * + Extended features functions
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup PCDEx PCDEx
+ * @brief PCD Extended HAL module driver
+ * @{
+ */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+
+#if defined (USB)
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup PCDEx_Exported_Functions PCDEx Exported Functions
+ * @{
+ */
+
+/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
+ * @brief PCDEx control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended features functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Update FIFO configuration
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configure PMA for EP
+ * @param hpcd Device instance
+ * @param ep_addr endpoint address
+ * @param ep_kind endpoint Kind
+ * USB_SNG_BUF: Single Buffer used
+ * USB_DBL_BUF: Double Buffer used
+ * @param pmaadress: EP address in The PMA: In case of single buffer endpoint
+ * this parameter is 16-bit value providing the address
+ * in PMA allocated to endpoint.
+ * In case of double buffer endpoint this parameter
+ * is a 32-bit value providing the endpoint buffer 0 address
+ * in the LSB part of 32-bit value and endpoint buffer 1 address
+ * in the MSB part of 32-bit value.
+ * @retval HAL status
+ */
+
+HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd,
+ uint16_t ep_addr,
+ uint16_t ep_kind,
+ uint32_t pmaadress)
+{
+ PCD_EPTypeDef *ep;
+
+ /* initialize ep structure*/
+ if ((0x80U & ep_addr) == 0x80U)
+ {
+ ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK];
+ }
+ else
+ {
+ ep = &hpcd->OUT_ep[ep_addr];
+ }
+
+ /* Here we check if the endpoint is single or double Buffer*/
+ if (ep_kind == PCD_SNG_BUF)
+ {
+ /* Single Buffer */
+ ep->doublebuffer = 0U;
+ /* Configure the PMA */
+ ep->pmaadress = (uint16_t)pmaadress;
+ }
+ else /* USB_DBL_BUF */
+ {
+ /* Double Buffer Endpoint */
+ ep->doublebuffer = 1U;
+ /* Configure the PMA */
+ ep->pmaaddr0 = (uint16_t)(pmaadress & 0xFFFFU);
+ ep->pmaaddr1 = (uint16_t)((pmaadress & 0xFFFF0000U) >> 16);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Activate BatteryCharging feature.
+ * @param hpcd PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd)
+{
+ USB_TypeDef *USBx = hpcd->Instance;
+ hpcd->battery_charging_active = 1U;
+
+ /* Enable BCD feature */
+ USBx->BCDR |= USB_BCDR_BCDEN;
+
+ /* Enable DCD : Data Contact Detect */
+ USBx->BCDR &= ~(USB_BCDR_PDEN);
+ USBx->BCDR &= ~(USB_BCDR_SDEN);
+ USBx->BCDR |= USB_BCDR_DCDEN;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactivate BatteryCharging feature.
+ * @param hpcd PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd)
+{
+ USB_TypeDef *USBx = hpcd->Instance;
+ hpcd->battery_charging_active = 0U;
+
+ /* Disable BCD feature */
+ USBx->BCDR &= ~(USB_BCDR_BCDEN);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle BatteryCharging Process.
+ * @param hpcd PCD handle
+ * @retval HAL status
+ */
+void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd)
+{
+ USB_TypeDef *USBx = hpcd->Instance;
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Wait Detect flag or a timeout is happen*/
+ while ((USBx->BCDR & USB_BCDR_DCDET) == 0U)
+ {
+ /* Check for the Timeout */
+ if ((HAL_GetTick() - tickstart) > 1000U)
+ {
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+ hpcd->BCDCallback(hpcd, PCD_BCD_ERROR);
+#else
+ HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_ERROR);
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+
+ return;
+ }
+ }
+
+ HAL_Delay(200U);
+
+ /* Data Pin Contact ? Check Detect flag */
+ if ((USBx->BCDR & USB_BCDR_DCDET) == USB_BCDR_DCDET)
+ {
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+ hpcd->BCDCallback(hpcd, PCD_BCD_CONTACT_DETECTION);
+#else
+ HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CONTACT_DETECTION);
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+ }
+ /* Primary detection: checks if connected to Standard Downstream Port
+ (without charging capability) */
+ USBx->BCDR &= ~(USB_BCDR_DCDEN);
+ HAL_Delay(50U);
+ USBx->BCDR |= (USB_BCDR_PDEN);
+ HAL_Delay(50U);
+
+ /* If Charger detect ? */
+ if ((USBx->BCDR & USB_BCDR_PDET) == USB_BCDR_PDET)
+ {
+ /* Start secondary detection to check connection to Charging Downstream
+ Port or Dedicated Charging Port */
+ USBx->BCDR &= ~(USB_BCDR_PDEN);
+ HAL_Delay(50U);
+ USBx->BCDR |= (USB_BCDR_SDEN);
+ HAL_Delay(50U);
+
+ /* If CDP ? */
+ if ((USBx->BCDR & USB_BCDR_SDET) == USB_BCDR_SDET)
+ {
+ /* Dedicated Downstream Port DCP */
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+ hpcd->BCDCallback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT);
+#else
+ HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT);
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+ }
+ else
+ {
+ /* Charging Downstream Port CDP */
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+ hpcd->BCDCallback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT);
+#else
+ HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT);
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+ }
+ }
+ else /* NO */
+ {
+ /* Standard Downstream Port */
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+ hpcd->BCDCallback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT);
+#else
+ HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT);
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+ }
+
+ /* Battery Charging capability discovery finished Start Enumeration */
+ (void)HAL_PCDEx_DeActivateBCD(hpcd);
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+ hpcd->BCDCallback(hpcd, PCD_BCD_DISCOVERY_COMPLETED);
+#else
+ HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DISCOVERY_COMPLETED);
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+}
+
+
+/**
+ * @brief Activate LPM feature.
+ * @param hpcd PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd)
+{
+
+ USB_TypeDef *USBx = hpcd->Instance;
+ hpcd->lpm_active = 1U;
+ hpcd->LPM_State = LPM_L0;
+
+ USBx->LPMCSR |= USB_LPMCSR_LMPEN;
+ USBx->LPMCSR |= USB_LPMCSR_LPMACK;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactivate LPM feature.
+ * @param hpcd PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd)
+{
+ USB_TypeDef *USBx = hpcd->Instance;
+
+ hpcd->lpm_active = 0U;
+
+ USBx->LPMCSR &= ~(USB_LPMCSR_LMPEN);
+ USBx->LPMCSR &= ~(USB_LPMCSR_LPMACK);
+
+ return HAL_OK;
+}
+
+
+
+/**
+ * @brief Send LPM message to user layer callback.
+ * @param hpcd PCD handle
+ * @param msg LPM message
+ * @retval HAL status
+ */
+__weak void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ UNUSED(msg);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_PCDEx_LPM_Callback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Send BatteryCharging message to user layer callback.
+ * @param hpcd PCD handle
+ * @param msg LPM message
+ * @retval HAL status
+ */
+__weak void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ UNUSED(msg);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_PCDEx_BCD_Callback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* defined (USB) */
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|