diff options
Diffstat (limited to 'fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_iwdg.c')
| -rw-r--r-- | fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_iwdg.c | 264 |
1 files changed, 0 insertions, 264 deletions
diff --git a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_iwdg.c b/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_iwdg.c deleted file mode 100644 index 18edcd2..0000000 --- a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_iwdg.c +++ /dev/null @@ -1,264 +0,0 @@ -/**
- ******************************************************************************
- * @file stm32f0xx_hal_iwdg.c
- * @author MCD Application Team
- * @brief IWDG HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the Independent Watchdog (IWDG) peripheral:
- * + Initialization and Start functions
- * + IO operation functions
- *
- @verbatim
- ==============================================================================
- ##### IWDG Generic features #####
- ==============================================================================
- [..]
- (+) The IWDG can be started by either software or hardware (configurable
- through option byte).
-
- (+) The IWDG is clocked by Low-Speed clock (LSI) and thus stays active even
- if the main clock fails.
-
- (+) Once the IWDG is started, the LSI is forced ON and both can not be
- disabled. The counter starts counting down from the reset value (0xFFF).
- When it reaches the end of count value (0x000) a reset signal is
- generated (IWDG reset).
-
- (+) Whenever the key value 0x0000 AAAA is written in the IWDG_KR register,
- the IWDG_RLR value is reloaded in the counter and the watchdog reset is
- prevented.
-
- (+) The IWDG is implemented in the VDD voltage domain that is still functional
- in STOP and STANDBY mode (IWDG reset can wake-up from STANDBY).
- IWDGRST flag in RCC_CSR register can be used to inform when an IWDG
- reset occurs.
-
- (+) Debug mode : When the microcontroller enters debug mode (core halted),
- the IWDG counter either continues to work normally or stops, depending
- on DBG_IWDG_STOP configuration bit in DBG module, accessible through
- __HAL_DBGMCU_FREEZE_IWDG() and __HAL_DBGMCU_UNFREEZE_IWDG() macros.
-
- [..] Min-max timeout value @32KHz (LSI): ~125us / ~32.7s
- The IWDG timeout may vary due to LSI frequency dispersion. STM32F0xx
- devices provide the capability to measure the LSI frequency (LSI clock
- connected internally to TIM16 CH1 input capture). The measured value
- can be used to have an IWDG timeout with an acceptable accuracy.
-
- ##### How to use this driver #####
- ==============================================================================
- [..]
- (#) Use IWDG using HAL_IWDG_Init() function to :
- (++) Enable instance by writing Start keyword in IWDG_KEY register. LSI
- clock is forced ON and IWDG counter starts counting down.
- (++) Enable write access to configuration registers:
- IWDG_PR, IWDG_RLR and IWDG_WINR.
- (++) Configure the IWDG prescaler and counter reload value. This reload
- value will be loaded in the IWDG counter each time the watchdog is
- reloaded, then the IWDG will start counting down from this value.
- (++) Wait for status flags to be reset.
- (++) Depending on window parameter:
- (+++) If Window Init parameter is same as Window register value,
- nothing more is done but reload counter value in order to exit
- function with exact time base.
- (+++) Else modify Window register. This will automatically reload
- watchdog counter.
-
- (#) Then the application program must refresh the IWDG counter at regular
- intervals during normal operation to prevent an MCU reset, using
- HAL_IWDG_Refresh() function.
-
- *** IWDG HAL driver macros list ***
- ====================================
- [..]
- Below the list of most used macros in IWDG HAL driver:
- (+) __HAL_IWDG_START: Enable the IWDG peripheral
- (+) __HAL_IWDG_RELOAD_COUNTER: Reloads IWDG counter with value defined in
- the reload register
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_hal.h"
-
-/** @addtogroup STM32F0xx_HAL_Driver
- * @{
- */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
-/** @addtogroup IWDG
- * @brief IWDG HAL module driver.
- * @{
- */
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/** @defgroup IWDG_Private_Defines IWDG Private Defines
- * @{
- */
-/* Status register need 5 RC LSI divided by prescaler clock to be updated. With
- higher prescaler (256), and according to LSI variation, we need to wait at
- least 6 cycles so 48 ms. */
-#define HAL_IWDG_DEFAULT_TIMEOUT 48u
-/**
- * @}
- */
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-
-/** @addtogroup IWDG_Exported_Functions
- * @{
- */
-
-/** @addtogroup IWDG_Exported_Functions_Group1
- * @brief Initialization and Start functions.
- *
-@verbatim
- ===============================================================================
- ##### Initialization and Start functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Initialize the IWDG according to the specified parameters in the
- IWDG_InitTypeDef of associated handle.
- (+) Manage Window option.
- (+) Once initialization is performed in HAL_IWDG_Init function, Watchdog
- is reloaded in order to exit function with correct time base.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initialize the IWDG according to the specified parameters in the
- * IWDG_InitTypeDef and start watchdog. Before exiting function,
- * watchdog is refreshed in order to have correct time base.
- * @param hiwdg pointer to a IWDG_HandleTypeDef structure that contains
- * the configuration information for the specified IWDG module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg)
-{
- uint32_t tickstart;
-
- /* Check the IWDG handle allocation */
- if (hiwdg == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_IWDG_ALL_INSTANCE(hiwdg->Instance));
- assert_param(IS_IWDG_PRESCALER(hiwdg->Init.Prescaler));
- assert_param(IS_IWDG_RELOAD(hiwdg->Init.Reload));
- assert_param(IS_IWDG_WINDOW(hiwdg->Init.Window));
-
- /* Enable IWDG. LSI is turned on automatically */
- __HAL_IWDG_START(hiwdg);
-
- /* Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers by writing
- 0x5555 in KR */
- IWDG_ENABLE_WRITE_ACCESS(hiwdg);
-
- /* Write to IWDG registers the Prescaler & Reload values to work with */
- hiwdg->Instance->PR = hiwdg->Init.Prescaler;
- hiwdg->Instance->RLR = hiwdg->Init.Reload;
-
- /* Check pending flag, if previous update not done, return timeout */
- tickstart = HAL_GetTick();
-
- /* Wait for register to be updated */
- while (hiwdg->Instance->SR != 0x00u)
- {
- if ((HAL_GetTick() - tickstart) > HAL_IWDG_DEFAULT_TIMEOUT)
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* If window parameter is different than current value, modify window
- register */
- if (hiwdg->Instance->WINR != hiwdg->Init.Window)
- {
- /* Write to IWDG WINR the IWDG_Window value to compare with. In any case,
- even if window feature is disabled, Watchdog will be reloaded by writing
- windows register */
- hiwdg->Instance->WINR = hiwdg->Init.Window;
- }
- else
- {
- /* Reload IWDG counter with value defined in the reload register */
- __HAL_IWDG_RELOAD_COUNTER(hiwdg);
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-
-/** @addtogroup IWDG_Exported_Functions_Group2
- * @brief IO operation functions
- *
-@verbatim
- ===============================================================================
- ##### IO operation functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Refresh the IWDG.
-
-@endverbatim
- * @{
- */
-
-
-/**
- * @brief Refresh the IWDG.
- * @param hiwdg pointer to a IWDG_HandleTypeDef structure that contains
- * the configuration information for the specified IWDG module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg)
-{
- /* Reload IWDG counter with value defined in the reload register */
- __HAL_IWDG_RELOAD_COUNTER(hiwdg);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* HAL_IWDG_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|