summaryrefslogtreecommitdiff
path: root/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c
diff options
context:
space:
mode:
Diffstat (limited to 'fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c')
-rw-r--r--fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c341
1 files changed, 0 insertions, 341 deletions
diff --git a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c b/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c
deleted file mode 100644
index cbe3f5b..0000000
--- a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c
+++ /dev/null
@@ -1,341 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f0xx_hal_cortex.c
- * @author MCD Application Team
- * @brief CORTEX HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the CORTEX:
- * + Initialization and de-initialization functions
- * + Peripheral Control functions
- *
- * @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
-
- [..]
- *** How to configure Interrupts using CORTEX HAL driver ***
- ===========================================================
- [..]
- This section provides functions allowing to configure the NVIC interrupts (IRQ).
- The Cortex-M0 exceptions are managed by CMSIS functions.
- (#) Enable and Configure the priority of the selected IRQ Channels.
- The priority can be 0..3.
-
- -@- Lower priority values gives higher priority.
- -@- Priority Order:
- (#@) Lowest priority.
- (#@) Lowest hardware priority (IRQn position).
-
- (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority()
-
- (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ()
-
- -@- Negative value of IRQn_Type are not allowed.
-
-
- [..]
- *** How to configure Systick using CORTEX HAL driver ***
- ========================================================
- [..]
- Setup SysTick Timer for time base.
-
- (+) The HAL_SYSTICK_Config()function calls the SysTick_Config() function which
- is a CMSIS function that:
- (++) Configures the SysTick Reload register with value passed as function parameter.
- (++) Configures the SysTick IRQ priority to the lowest value (0x03).
- (++) Resets the SysTick Counter register.
- (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK).
- (++) Enables the SysTick Interrupt.
- (++) Starts the SysTick Counter.
-
- (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro
- HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the
- HAL_SYSTICK_Config() function call. The HAL_SYSTICK_CLKSourceConfig() macro is defined
- inside the stm32f0xx_hal_cortex.h file.
-
- (+) You can change the SysTick IRQ priority by calling the
- HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function
- call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function.
-
- (+) To adjust the SysTick time base, use the following formula:
-
- Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s)
- (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function
- (++) Reload Value should not exceed 0xFFFFFF
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_hal.h"
-
-/** @addtogroup STM32F0xx_HAL_Driver
- * @{
- */
-
-/** @defgroup CORTEX CORTEX
- * @brief CORTEX CORTEX HAL module driver
- * @{
- */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Exported functions ---------------------------------------------------------*/
-
-/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions
- * @{
- */
-
-
-/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ==============================================================================
- ##### Initialization and de-initialization functions #####
- ==============================================================================
- [..]
- This section provides the CORTEX HAL driver functions allowing to configure Interrupts
- Systick functionalities
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Sets the priority of an interrupt.
- * @param IRQn External interrupt number .
- * This parameter can be an enumerator of IRQn_Type enumeration
- * (For the complete STM32 Devices IRQ Channels list, please refer to stm32f0xx.h file)
- * @param PreemptPriority The preemption priority for the IRQn channel.
- * This parameter can be a value between 0 and 3.
- * A lower priority value indicates a higher priority
- * @param SubPriority the subpriority level for the IRQ channel.
- * with stm32f0xx devices, this parameter is a dummy value and it is ignored, because
- * no subpriority supported in Cortex M0 based products.
- * @retval None
- */
-void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority)
-{
- /* Check the parameters */
- assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority));
- NVIC_SetPriority(IRQn,PreemptPriority);
-}
-
-/**
- * @brief Enables a device specific interrupt in the NVIC interrupt controller.
- * @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig()
- * function should be called before.
- * @param IRQn External interrupt number.
- * This parameter can be an enumerator of IRQn_Type enumeration
- * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
- * @retval None
- */
-void HAL_NVIC_EnableIRQ(IRQn_Type IRQn)
-{
- /* Check the parameters */
- assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
-
- /* Enable interrupt */
- NVIC_EnableIRQ(IRQn);
-}
-
-/**
- * @brief Disables a device specific interrupt in the NVIC interrupt controller.
- * @param IRQn External interrupt number.
- * This parameter can be an enumerator of IRQn_Type enumeration
- * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
- * @retval None
- */
-void HAL_NVIC_DisableIRQ(IRQn_Type IRQn)
-{
- /* Check the parameters */
- assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
-
- /* Disable interrupt */
- NVIC_DisableIRQ(IRQn);
-}
-
-/**
- * @brief Initiates a system reset request to reset the MCU.
- * @retval None
- */
-void HAL_NVIC_SystemReset(void)
-{
- /* System Reset */
- NVIC_SystemReset();
-}
-
-/**
- * @brief Initializes the System Timer and its interrupt, and starts the System Tick Timer.
- * Counter is in free running mode to generate periodic interrupts.
- * @param TicksNumb Specifies the ticks Number of ticks between two interrupts.
- * @retval status: - 0 Function succeeded.
- * - 1 Function failed.
- */
-uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb)
-{
- return SysTick_Config(TicksNumb);
-}
-/**
- * @}
- */
-
-/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions
- * @brief Cortex control functions
- *
-@verbatim
- ==============================================================================
- ##### Peripheral Control functions #####
- ==============================================================================
- [..]
- This subsection provides a set of functions allowing to control the CORTEX
- (NVIC, SYSTICK) functionalities.
-
-
-@endverbatim
- * @{
- */
-
-
-/**
- * @brief Gets the priority of an interrupt.
- * @param IRQn External interrupt number.
- * This parameter can be an enumerator of IRQn_Type enumeration
- * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
- * @retval None
- */
-uint32_t HAL_NVIC_GetPriority(IRQn_Type IRQn)
-{
- /* Get priority for Cortex-M system or device specific interrupts */
- return NVIC_GetPriority(IRQn);
-}
-
-/**
- * @brief Sets Pending bit of an external interrupt.
- * @param IRQn External interrupt number
- * This parameter can be an enumerator of IRQn_Type enumeration
- * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
- * @retval None
- */
-void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn)
-{
- /* Check the parameters */
- assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
-
- /* Set interrupt pending */
- NVIC_SetPendingIRQ(IRQn);
-}
-
-/**
- * @brief Gets Pending Interrupt (reads the pending register in the NVIC
- * and returns the pending bit for the specified interrupt).
- * @param IRQn External interrupt number.
- * This parameter can be an enumerator of IRQn_Type enumeration
- * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
- * @retval status: - 0 Interrupt status is not pending.
- * - 1 Interrupt status is pending.
- */
-uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn)
-{
- /* Check the parameters */
- assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
-
- /* Return 1 if pending else 0 */
- return NVIC_GetPendingIRQ(IRQn);
-}
-
-/**
- * @brief Clears the pending bit of an external interrupt.
- * @param IRQn External interrupt number.
- * This parameter can be an enumerator of IRQn_Type enumeration
- * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
- * @retval None
- */
-void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn)
-{
- /* Check the parameters */
- assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
-
- /* Clear pending interrupt */
- NVIC_ClearPendingIRQ(IRQn);
-}
-
-/**
- * @brief Configures the SysTick clock source.
- * @param CLKSource specifies the SysTick clock source.
- * This parameter can be one of the following values:
- * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source.
- * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source.
- * @retval None
- */
-void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource)
-{
- /* Check the parameters */
- assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource));
- if (CLKSource == SYSTICK_CLKSOURCE_HCLK)
- {
- SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK;
- }
- else
- {
- SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK;
- }
-}
-
-/**
- * @brief This function handles SYSTICK interrupt request.
- * @retval None
- */
-void HAL_SYSTICK_IRQHandler(void)
-{
- HAL_SYSTICK_Callback();
-}
-
-/**
- * @brief SYSTICK callback.
- * @retval None
- */
-__weak void HAL_SYSTICK_Callback(void)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SYSTICK_Callback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
generated by cgit (git 2.34.1) at 2024-05-17 03:35:39 +0000