diff options
Diffstat (limited to 'fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_tim.h')
| -rw-r--r-- | fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_tim.h | 3942 |
1 files changed, 0 insertions, 3942 deletions
diff --git a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_tim.h b/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_tim.h deleted file mode 100644 index c5f8653..0000000 --- a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_tim.h +++ /dev/null @@ -1,3942 +0,0 @@ -/**
- ******************************************************************************
- * @file stm32f0xx_ll_tim.h
- * @author MCD Application Team
- * @brief Header file of TIM LL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F0xx_LL_TIM_H
-#define __STM32F0xx_LL_TIM_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx.h"
-
-/** @addtogroup STM32F0xx_LL_Driver
- * @{
- */
-
-#if defined (TIM1) || defined (TIM2) || defined (TIM3) || defined (TIM14) || defined (TIM15) || defined (TIM16) || defined (TIM17) || defined (TIM6) || defined (TIM7)
-
-/** @defgroup TIM_LL TIM
- * @{
- */
-
-/* Private types -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/** @defgroup TIM_LL_Private_Variables TIM Private Variables
- * @{
- */
-static const uint8_t OFFSET_TAB_CCMRx[] =
-{
- 0x00U, /* 0: TIMx_CH1 */
- 0x00U, /* 1: TIMx_CH1N */
- 0x00U, /* 2: TIMx_CH2 */
- 0x00U, /* 3: TIMx_CH2N */
- 0x04U, /* 4: TIMx_CH3 */
- 0x04U, /* 5: TIMx_CH3N */
- 0x04U /* 6: TIMx_CH4 */
-};
-
-static const uint8_t SHIFT_TAB_OCxx[] =
-{
- 0U, /* 0: OC1M, OC1FE, OC1PE */
- 0U, /* 1: - NA */
- 8U, /* 2: OC2M, OC2FE, OC2PE */
- 0U, /* 3: - NA */
- 0U, /* 4: OC3M, OC3FE, OC3PE */
- 0U, /* 5: - NA */
- 8U /* 6: OC4M, OC4FE, OC4PE */
-};
-
-static const uint8_t SHIFT_TAB_ICxx[] =
-{
- 0U, /* 0: CC1S, IC1PSC, IC1F */
- 0U, /* 1: - NA */
- 8U, /* 2: CC2S, IC2PSC, IC2F */
- 0U, /* 3: - NA */
- 0U, /* 4: CC3S, IC3PSC, IC3F */
- 0U, /* 5: - NA */
- 8U /* 6: CC4S, IC4PSC, IC4F */
-};
-
-static const uint8_t SHIFT_TAB_CCxP[] =
-{
- 0U, /* 0: CC1P */
- 2U, /* 1: CC1NP */
- 4U, /* 2: CC2P */
- 6U, /* 3: CC2NP */
- 8U, /* 4: CC3P */
- 10U, /* 5: CC3NP */
- 12U /* 6: CC4P */
-};
-
-static const uint8_t SHIFT_TAB_OISx[] =
-{
- 0U, /* 0: OIS1 */
- 1U, /* 1: OIS1N */
- 2U, /* 2: OIS2 */
- 3U, /* 3: OIS2N */
- 4U, /* 4: OIS3 */
- 5U, /* 5: OIS3N */
- 6U /* 6: OIS4 */
-};
-/**
- * @}
- */
-
-/* Private constants ---------------------------------------------------------*/
-/** @defgroup TIM_LL_Private_Constants TIM Private Constants
- * @{
- */
-
-
-#define TIMx_OR_RMP_SHIFT 16U
-#define TIMx_OR_RMP_MASK 0x0000FFFFU
-#define TIM14_OR_RMP_MASK (TIM14_OR_TI1_RMP << TIMx_OR_RMP_SHIFT)
-
-/* Mask used to set the TDG[x:0] of the DTG bits of the TIMx_BDTR register */
-#define DT_DELAY_1 ((uint8_t)0x7F)
-#define DT_DELAY_2 ((uint8_t)0x3F)
-#define DT_DELAY_3 ((uint8_t)0x1F)
-#define DT_DELAY_4 ((uint8_t)0x1F)
-
-/* Mask used to set the DTG[7:5] bits of the DTG bits of the TIMx_BDTR register */
-#define DT_RANGE_1 ((uint8_t)0x00)
-#define DT_RANGE_2 ((uint8_t)0x80)
-#define DT_RANGE_3 ((uint8_t)0xC0)
-#define DT_RANGE_4 ((uint8_t)0xE0)
-
-
-/**
- * @}
- */
-
-/* Private macros ------------------------------------------------------------*/
-/** @defgroup TIM_LL_Private_Macros TIM Private Macros
- * @{
- */
-/** @brief Convert channel id into channel index.
- * @param __CHANNEL__ This parameter can be one of the following values:
- * @arg @ref LL_TIM_CHANNEL_CH1
- * @arg @ref LL_TIM_CHANNEL_CH1N
- * @arg @ref LL_TIM_CHANNEL_CH2
- * @arg @ref LL_TIM_CHANNEL_CH2N
- * @arg @ref LL_TIM_CHANNEL_CH3
- * @arg @ref LL_TIM_CHANNEL_CH3N
- * @arg @ref LL_TIM_CHANNEL_CH4
- * @retval none
- */
-#define TIM_GET_CHANNEL_INDEX( __CHANNEL__) \
- (((__CHANNEL__) == LL_TIM_CHANNEL_CH1) ? 0U :\
- ((__CHANNEL__) == LL_TIM_CHANNEL_CH1N) ? 1U :\
- ((__CHANNEL__) == LL_TIM_CHANNEL_CH2) ? 2U :\
- ((__CHANNEL__) == LL_TIM_CHANNEL_CH2N) ? 3U :\
- ((__CHANNEL__) == LL_TIM_CHANNEL_CH3) ? 4U :\
- ((__CHANNEL__) == LL_TIM_CHANNEL_CH3N) ? 5U : 6U)
-
-/** @brief Calculate the deadtime sampling period(in ps).
- * @param __TIMCLK__ timer input clock frequency (in Hz).
- * @param __CKD__ This parameter can be one of the following values:
- * @arg @ref LL_TIM_CLOCKDIVISION_DIV1
- * @arg @ref LL_TIM_CLOCKDIVISION_DIV2
- * @arg @ref LL_TIM_CLOCKDIVISION_DIV4
- * @retval none
- */
-#define TIM_CALC_DTS(__TIMCLK__, __CKD__) \
- (((__CKD__) == LL_TIM_CLOCKDIVISION_DIV1) ? ((uint64_t)1000000000000U/(__TIMCLK__)) : \
- ((__CKD__) == LL_TIM_CLOCKDIVISION_DIV2) ? ((uint64_t)1000000000000U/((__TIMCLK__) >> 1U)) : \
- ((uint64_t)1000000000000U/((__TIMCLK__) >> 2U)))
-/**
- * @}
- */
-
-
-/* Exported types ------------------------------------------------------------*/
-#if defined(USE_FULL_LL_DRIVER)
-/** @defgroup TIM_LL_ES_INIT TIM Exported Init structure
- * @{
- */
-
-/**
- * @brief TIM Time Base configuration structure definition.
- */
-typedef struct
-{
- uint16_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock.
- This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF.
-
- This feature can be modified afterwards using unitary function @ref LL_TIM_SetPrescaler().*/
-
- uint32_t CounterMode; /*!< Specifies the counter mode.
- This parameter can be a value of @ref TIM_LL_EC_COUNTERMODE.
-
- This feature can be modified afterwards using unitary function @ref LL_TIM_SetCounterMode().*/
-
- uint32_t Autoreload; /*!< Specifies the auto reload value to be loaded into the active
- Auto-Reload Register at the next update event.
- This parameter must be a number between Min_Data=0x0000 and Max_Data=0xFFFF.
- Some timer instances may support 32 bits counters. In that case this parameter must be a number between 0x0000 and 0xFFFFFFFF.
-
- This feature can be modified afterwards using unitary function @ref LL_TIM_SetAutoReload().*/
-
- uint32_t ClockDivision; /*!< Specifies the clock division.
- This parameter can be a value of @ref TIM_LL_EC_CLOCKDIVISION.
-
- This feature can be modified afterwards using unitary function @ref LL_TIM_SetClockDivision().*/
-
- uint8_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter
- reaches zero, an update event is generated and counting restarts
- from the RCR value (N).
- This means in PWM mode that (N+1) corresponds to:
- - the number of PWM periods in edge-aligned mode
- - the number of half PWM period in center-aligned mode
- This parameter must be a number between 0x00 and 0xFF.
-
- This feature can be modified afterwards using unitary function @ref LL_TIM_SetRepetitionCounter().*/
-} LL_TIM_InitTypeDef;
-
-/**
- * @brief TIM Output Compare configuration structure definition.
- */
-typedef struct
-{
- uint32_t OCMode; /*!< Specifies the output mode.
- This parameter can be a value of @ref TIM_LL_EC_OCMODE.
-
- This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetMode().*/
-
- uint32_t OCState; /*!< Specifies the TIM Output Compare state.
- This parameter can be a value of @ref TIM_LL_EC_OCSTATE.
-
- This feature can be modified afterwards using unitary functions @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/
-
- uint32_t OCNState; /*!< Specifies the TIM complementary Output Compare state.
- This parameter can be a value of @ref TIM_LL_EC_OCSTATE.
-
- This feature can be modified afterwards using unitary functions @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/
-
- uint32_t CompareValue; /*!< Specifies the Compare value to be loaded into the Capture Compare Register.
- This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF.
-
- This feature can be modified afterwards using unitary function LL_TIM_OC_SetCompareCHx (x=1..6).*/
-
- uint32_t OCPolarity; /*!< Specifies the output polarity.
- This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY.
-
- This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetPolarity().*/
-
- uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
- This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY.
-
- This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetPolarity().*/
-
-
- uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
- This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE.
-
- This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetIdleState().*/
-
- uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
- This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE.
-
- This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetIdleState().*/
-} LL_TIM_OC_InitTypeDef;
-
-/**
- * @brief TIM Input Capture configuration structure definition.
- */
-
-typedef struct
-{
-
- uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
- This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY.
-
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/
-
- uint32_t ICActiveInput; /*!< Specifies the input.
- This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT.
-
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetActiveInput().*/
-
- uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler.
- This parameter can be a value of @ref TIM_LL_EC_ICPSC.
-
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/
-
- uint32_t ICFilter; /*!< Specifies the input capture filter.
- This parameter can be a value of @ref TIM_LL_EC_IC_FILTER.
-
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/
-} LL_TIM_IC_InitTypeDef;
-
-
-/**
- * @brief TIM Encoder interface configuration structure definition.
- */
-typedef struct
-{
- uint32_t EncoderMode; /*!< Specifies the encoder resolution (x2 or x4).
- This parameter can be a value of @ref TIM_LL_EC_ENCODERMODE.
-
- This feature can be modified afterwards using unitary function @ref LL_TIM_SetEncoderMode().*/
-
- uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input.
- This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY.
-
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/
-
- uint32_t IC1ActiveInput; /*!< Specifies the TI1 input source
- This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT.
-
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetActiveInput().*/
-
- uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value.
- This parameter can be a value of @ref TIM_LL_EC_ICPSC.
-
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/
-
- uint32_t IC1Filter; /*!< Specifies the TI1 input filter.
- This parameter can be a value of @ref TIM_LL_EC_IC_FILTER.
-
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/
-
- uint32_t IC2Polarity; /*!< Specifies the active edge of TI2 input.
- This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY.
-
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/
-
- uint32_t IC2ActiveInput; /*!< Specifies the TI2 input source
- This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT.
-
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetActiveInput().*/
-
- uint32_t IC2Prescaler; /*!< Specifies the TI2 input prescaler value.
- This parameter can be a value of @ref TIM_LL_EC_ICPSC.
-
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/
-
- uint32_t IC2Filter; /*!< Specifies the TI2 input filter.
- This parameter can be a value of @ref TIM_LL_EC_IC_FILTER.
-
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/
-
-} LL_TIM_ENCODER_InitTypeDef;
-
-/**
- * @brief TIM Hall sensor interface configuration structure definition.
- */
-typedef struct
-{
-
- uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input.
- This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY.
-
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/
-
- uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value.
- Prescaler must be set to get a maximum counter period longer than the
- time interval between 2 consecutive changes on the Hall inputs.
- This parameter can be a value of @ref TIM_LL_EC_ICPSC.
-
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/
-
- uint32_t IC1Filter; /*!< Specifies the TI1 input filter.
- This parameter can be a value of @ref TIM_LL_EC_IC_FILTER.
-
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/
-
- uint32_t CommutationDelay; /*!< Specifies the compare value to be loaded into the Capture Compare Register.
- A positive pulse (TRGO event) is generated with a programmable delay every time
- a change occurs on the Hall inputs.
- This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF.
-
- This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetCompareCH2().*/
-} LL_TIM_HALLSENSOR_InitTypeDef;
-
-/**
- * @brief BDTR (Break and Dead Time) structure definition
- */
-typedef struct
-{
- uint32_t OSSRState; /*!< Specifies the Off-State selection used in Run mode.
- This parameter can be a value of @ref TIM_LL_EC_OSSR
-
- This feature can be modified afterwards using unitary function @ref LL_TIM_SetOffStates()
-
- @note This bit-field cannot be modified as long as LOCK level 2 has been programmed. */
-
- uint32_t OSSIState; /*!< Specifies the Off-State used in Idle state.
- This parameter can be a value of @ref TIM_LL_EC_OSSI
-
- This feature can be modified afterwards using unitary function @ref LL_TIM_SetOffStates()
-
- @note This bit-field cannot be modified as long as LOCK level 2 has been programmed. */
-
- uint32_t LockLevel; /*!< Specifies the LOCK level parameters.
- This parameter can be a value of @ref TIM_LL_EC_LOCKLEVEL
-
- @note The LOCK bits can be written only once after the reset. Once the TIMx_BDTR register
- has been written, their content is frozen until the next reset.*/
-
- uint8_t DeadTime; /*!< Specifies the delay time between the switching-off and the
- switching-on of the outputs.
- This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF.
-
- This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetDeadTime()
-
- @note This bit-field can not be modified as long as LOCK level 1, 2 or 3 has been programmed. */
-
- uint16_t BreakState; /*!< Specifies whether the TIM Break input is enabled or not.
- This parameter can be a value of @ref TIM_LL_EC_BREAK_ENABLE
-
- This feature can be modified afterwards using unitary functions @ref LL_TIM_EnableBRK() or @ref LL_TIM_DisableBRK()
-
- @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */
-
- uint32_t BreakPolarity; /*!< Specifies the TIM Break Input pin polarity.
- This parameter can be a value of @ref TIM_LL_EC_BREAK_POLARITY
-
- This feature can be modified afterwards using unitary function @ref LL_TIM_ConfigBRK()
-
- @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */
-
- uint32_t AutomaticOutput; /*!< Specifies whether the TIM Automatic Output feature is enabled or not.
- This parameter can be a value of @ref TIM_LL_EC_AUTOMATICOUTPUT_ENABLE
-
- This feature can be modified afterwards using unitary functions @ref LL_TIM_EnableAutomaticOutput() or @ref LL_TIM_DisableAutomaticOutput()
-
- @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */
-} LL_TIM_BDTR_InitTypeDef;
-
-/**
- * @}
- */
-#endif /* USE_FULL_LL_DRIVER */
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup TIM_LL_Exported_Constants TIM Exported Constants
- * @{
- */
-
-/** @defgroup TIM_LL_EC_GET_FLAG Get Flags Defines
- * @brief Flags defines which can be used with LL_TIM_ReadReg function.
- * @{
- */
-#define LL_TIM_SR_UIF TIM_SR_UIF /*!< Update interrupt flag */
-#define LL_TIM_SR_CC1IF TIM_SR_CC1IF /*!< Capture/compare 1 interrupt flag */
-#define LL_TIM_SR_CC2IF TIM_SR_CC2IF /*!< Capture/compare 2 interrupt flag */
-#define LL_TIM_SR_CC3IF TIM_SR_CC3IF /*!< Capture/compare 3 interrupt flag */
-#define LL_TIM_SR_CC4IF TIM_SR_CC4IF /*!< Capture/compare 4 interrupt flag */
-#define LL_TIM_SR_COMIF TIM_SR_COMIF /*!< COM interrupt flag */
-#define LL_TIM_SR_TIF TIM_SR_TIF /*!< Trigger interrupt flag */
-#define LL_TIM_SR_BIF TIM_SR_BIF /*!< Break interrupt flag */
-#define LL_TIM_SR_CC1OF TIM_SR_CC1OF /*!< Capture/Compare 1 overcapture flag */
-#define LL_TIM_SR_CC2OF TIM_SR_CC2OF /*!< Capture/Compare 2 overcapture flag */
-#define LL_TIM_SR_CC3OF TIM_SR_CC3OF /*!< Capture/Compare 3 overcapture flag */
-#define LL_TIM_SR_CC4OF TIM_SR_CC4OF /*!< Capture/Compare 4 overcapture flag */
-/**
- * @}
- */
-
-#if defined(USE_FULL_LL_DRIVER)
-/** @defgroup TIM_LL_EC_BREAK_ENABLE Break Enable
- * @{
- */
-#define LL_TIM_BREAK_DISABLE 0x00000000U /*!< Break function disabled */
-#define LL_TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break function enabled */
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EC_AUTOMATICOUTPUT_ENABLE Automatic output enable
- * @{
- */
-#define LL_TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */
-#define LL_TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event */
-/**
- * @}
- */
-#endif /* USE_FULL_LL_DRIVER */
-
-/** @defgroup TIM_LL_EC_IT IT Defines
- * @brief IT defines which can be used with LL_TIM_ReadReg and LL_TIM_WriteReg functions.
- * @{
- */
-#define LL_TIM_DIER_UIE TIM_DIER_UIE /*!< Update interrupt enable */
-#define LL_TIM_DIER_CC1IE TIM_DIER_CC1IE /*!< Capture/compare 1 interrupt enable */
-#define LL_TIM_DIER_CC2IE TIM_DIER_CC2IE /*!< Capture/compare 2 interrupt enable */
-#define LL_TIM_DIER_CC3IE TIM_DIER_CC3IE /*!< Capture/compare 3 interrupt enable */
-#define LL_TIM_DIER_CC4IE TIM_DIER_CC4IE /*!< Capture/compare 4 interrupt enable */
-#define LL_TIM_DIER_COMIE TIM_DIER_COMIE /*!< COM interrupt enable */
-#define LL_TIM_DIER_TIE TIM_DIER_TIE /*!< Trigger interrupt enable */
-#define LL_TIM_DIER_BIE TIM_DIER_BIE /*!< Break interrupt enable */
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EC_UPDATESOURCE Update Source
- * @{
- */
-#define LL_TIM_UPDATESOURCE_REGULAR 0x00000000U /*!< Counter overflow/underflow, Setting the UG bit or Update generation through the slave mode controller generates an update request */
-#define LL_TIM_UPDATESOURCE_COUNTER TIM_CR1_URS /*!< Only counter overflow/underflow generates an update request */
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EC_ONEPULSEMODE One Pulse Mode
- * @{
- */
-#define LL_TIM_ONEPULSEMODE_SINGLE TIM_CR1_OPM /*!< Counter is not stopped at update event */
-#define LL_TIM_ONEPULSEMODE_REPETITIVE 0x00000000U /*!< Counter stops counting at the next update event */
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EC_COUNTERMODE Counter Mode
- * @{
- */
-#define LL_TIM_COUNTERMODE_UP 0x00000000U /*!<Counter used as upcounter */
-#define LL_TIM_COUNTERMODE_DOWN TIM_CR1_DIR /*!< Counter used as downcounter */
-#define LL_TIM_COUNTERMODE_CENTER_UP TIM_CR1_CMS_0 /*!< The counter counts up and down alternatively. Output compare interrupt flags of output channels are set only when the counter is counting down. */
-#define LL_TIM_COUNTERMODE_CENTER_DOWN TIM_CR1_CMS_1 /*!<The counter counts up and down alternatively. Output compare interrupt flags of output channels are set only when the counter is counting up */
-#define LL_TIM_COUNTERMODE_CENTER_UP_DOWN TIM_CR1_CMS /*!< The counter counts up and down alternatively. Output compare interrupt flags of output channels are set only when the counter is counting up or down. */
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EC_CLOCKDIVISION Clock Division
- * @{
- */
-#define LL_TIM_CLOCKDIVISION_DIV1 0x00000000U /*!< tDTS=tCK_INT */
-#define LL_TIM_CLOCKDIVISION_DIV2 TIM_CR1_CKD_0 /*!< tDTS=2*tCK_INT */
-#define LL_TIM_CLOCKDIVISION_DIV4 TIM_CR1_CKD_1 /*!< tDTS=4*tCK_INT */
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EC_COUNTERDIRECTION Counter Direction
- * @{
- */
-#define LL_TIM_COUNTERDIRECTION_UP 0x00000000U /*!< Timer counter counts up */
-#define LL_TIM_COUNTERDIRECTION_DOWN TIM_CR1_DIR /*!< Timer counter counts down */
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EC_CCUPDATESOURCE Capture Compare Update Source
- * @{
- */
-#define LL_TIM_CCUPDATESOURCE_COMG_ONLY 0x00000000U /*!< Capture/compare control bits are updated by setting the COMG bit only */
-#define LL_TIM_CCUPDATESOURCE_COMG_AND_TRGI TIM_CR2_CCUS /*!< Capture/compare control bits are updated by setting the COMG bit or when a rising edge occurs on trigger input (TRGI) */
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EC_CCDMAREQUEST Capture Compare DMA Request
- * @{
- */
-#define LL_TIM_CCDMAREQUEST_CC 0x00000000U /*!< CCx DMA request sent when CCx event occurs */
-#define LL_TIM_CCDMAREQUEST_UPDATE TIM_CR2_CCDS /*!< CCx DMA requests sent when update event occurs */
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EC_LOCKLEVEL Lock Level
- * @{
- */
-#define LL_TIM_LOCKLEVEL_OFF 0x00000000U /*!< LOCK OFF - No bit is write protected */
-#define LL_TIM_LOCKLEVEL_1 TIM_BDTR_LOCK_0 /*!< LOCK Level 1 */
-#define LL_TIM_LOCKLEVEL_2 TIM_BDTR_LOCK_1 /*!< LOCK Level 2 */
-#define LL_TIM_LOCKLEVEL_3 TIM_BDTR_LOCK /*!< LOCK Level 3 */
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EC_CHANNEL Channel
- * @{
- */
-#define LL_TIM_CHANNEL_CH1 TIM_CCER_CC1E /*!< Timer input/output channel 1 */
-#define LL_TIM_CHANNEL_CH1N TIM_CCER_CC1NE /*!< Timer complementary output channel 1 */
-#define LL_TIM_CHANNEL_CH2 TIM_CCER_CC2E /*!< Timer input/output channel 2 */
-#define LL_TIM_CHANNEL_CH2N TIM_CCER_CC2NE /*!< Timer complementary output channel 2 */
-#define LL_TIM_CHANNEL_CH3 TIM_CCER_CC3E /*!< Timer input/output channel 3 */
-#define LL_TIM_CHANNEL_CH3N TIM_CCER_CC3NE /*!< Timer complementary output channel 3 */
-#define LL_TIM_CHANNEL_CH4 TIM_CCER_CC4E /*!< Timer input/output channel 4 */
-/**
- * @}
- */
-
-#if defined(USE_FULL_LL_DRIVER)
-/** @defgroup TIM_LL_EC_OCSTATE Output Configuration State
- * @{
- */
-#define LL_TIM_OCSTATE_DISABLE 0x00000000U /*!< OCx is not active */
-#define LL_TIM_OCSTATE_ENABLE TIM_CCER_CC1E /*!< OCx signal is output on the corresponding output pin */
-/**
- * @}
- */
-#endif /* USE_FULL_LL_DRIVER */
-
-/** @defgroup TIM_LL_EC_OCMODE Output Configuration Mode
- * @{
- */
-#define LL_TIM_OCMODE_FROZEN 0x00000000U /*!<The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the output channel level */
-#define LL_TIM_OCMODE_ACTIVE TIM_CCMR1_OC1M_0 /*!<OCyREF is forced high on compare match*/
-#define LL_TIM_OCMODE_INACTIVE TIM_CCMR1_OC1M_1 /*!<OCyREF is forced low on compare match*/
-#define LL_TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!<OCyREF toggles on compare match*/
-#define LL_TIM_OCMODE_FORCED_INACTIVE TIM_CCMR1_OC1M_2 /*!<OCyREF is forced low*/
-#define LL_TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0) /*!<OCyREF is forced high*/
-#define LL_TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1) /*!<In upcounting, channel y is active as long as TIMx_CNT<TIMx_CCRy else inactive. In downcounting, channel y is inactive as long as TIMx_CNT>TIMx_CCRy else active.*/
-#define LL_TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!<In upcounting, channel y is inactive as long as TIMx_CNT<TIMx_CCRy else active. In downcounting, channel y is active as long as TIMx_CNT>TIMx_CCRy else inactive*/
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EC_OCPOLARITY Output Configuration Polarity
- * @{
- */
-#define LL_TIM_OCPOLARITY_HIGH 0x00000000U /*!< OCxactive high*/
-#define LL_TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< OCxactive low*/
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EC_OCIDLESTATE Output Configuration Idle State
- * @{
- */
-#define LL_TIM_OCIDLESTATE_LOW 0x00000000U /*!<OCx=0 (after a dead-time if OC is implemented) when MOE=0*/
-#define LL_TIM_OCIDLESTATE_HIGH TIM_CR2_OIS1 /*!<OCx=1 (after a dead-time if OC is implemented) when MOE=0*/
-/**
- * @}
- */
-
-
-/** @defgroup TIM_LL_EC_ACTIVEINPUT Active Input Selection
- * @{
- */
-#define LL_TIM_ACTIVEINPUT_DIRECTTI (TIM_CCMR1_CC1S_0 << 16U) /*!< ICx is mapped on TIx */
-#define LL_TIM_ACTIVEINPUT_INDIRECTTI (TIM_CCMR1_CC1S_1 << 16U) /*!< ICx is mapped on TIy */
-#define LL_TIM_ACTIVEINPUT_TRC (TIM_CCMR1_CC1S << 16U) /*!< ICx is mapped on TRC */
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EC_ICPSC Input Configuration Prescaler
- * @{
- */
-#define LL_TIM_ICPSC_DIV1 0x00000000U /*!< No prescaler, capture is done each time an edge is detected on the capture input */
-#define LL_TIM_ICPSC_DIV2 (TIM_CCMR1_IC1PSC_0 << 16U) /*!< Capture is done once every 2 events */
-#define LL_TIM_ICPSC_DIV4 (TIM_CCMR1_IC1PSC_1 << 16U) /*!< Capture is done once every 4 events */
-#define LL_TIM_ICPSC_DIV8 (TIM_CCMR1_IC1PSC << 16U) /*!< Capture is done once every 8 events */
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EC_IC_FILTER Input Configuration Filter
- * @{
- */
-#define LL_TIM_IC_FILTER_FDIV1 0x00000000U /*!< No filter, sampling is done at fDTS */
-#define LL_TIM_IC_FILTER_FDIV1_N2 (TIM_CCMR1_IC1F_0 << 16U) /*!< fSAMPLING=fCK_INT, N=2 */
-#define LL_TIM_IC_FILTER_FDIV1_N4 (TIM_CCMR1_IC1F_1 << 16U) /*!< fSAMPLING=fCK_INT, N=4 */
-#define LL_TIM_IC_FILTER_FDIV1_N8 ((TIM_CCMR1_IC1F_1 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fCK_INT, N=8 */
-#define LL_TIM_IC_FILTER_FDIV2_N6 (TIM_CCMR1_IC1F_2 << 16U) /*!< fSAMPLING=fDTS/2, N=6 */
-#define LL_TIM_IC_FILTER_FDIV2_N8 ((TIM_CCMR1_IC1F_2 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fDTS/2, N=8 */
-#define LL_TIM_IC_FILTER_FDIV4_N6 ((TIM_CCMR1_IC1F_2 | TIM_CCMR1_IC1F_1) << 16U) /*!< fSAMPLING=fDTS/4, N=6 */
-#define LL_TIM_IC_FILTER_FDIV4_N8 ((TIM_CCMR1_IC1F_2 | TIM_CCMR1_IC1F_1 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fDTS/4, N=8 */
-#define LL_TIM_IC_FILTER_FDIV8_N6 (TIM_CCMR1_IC1F_3 << 16U) /*!< fSAMPLING=fDTS/8, N=6 */
-#define LL_TIM_IC_FILTER_FDIV8_N8 ((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fDTS/8, N=8 */
-#define LL_TIM_IC_FILTER_FDIV16_N5 ((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_1) << 16U) /*!< fSAMPLING=fDTS/16, N=5 */
-#define LL_TIM_IC_FILTER_FDIV16_N6 ((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_1 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fDTS/16, N=6 */
-#define LL_TIM_IC_FILTER_FDIV16_N8 ((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_2) << 16U) /*!< fSAMPLING=fDTS/16, N=8 */
-#define LL_TIM_IC_FILTER_FDIV32_N5 ((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_2 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fDTS/32, N=5 */
-#define LL_TIM_IC_FILTER_FDIV32_N6 ((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_2 | TIM_CCMR1_IC1F_1) << 16U) /*!< fSAMPLING=fDTS/32, N=6 */
-#define LL_TIM_IC_FILTER_FDIV32_N8 (TIM_CCMR1_IC1F << 16U) /*!< fSAMPLING=fDTS/32, N=8 */
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EC_IC_POLARITY Input Configuration Polarity
- * @{
- */
-#define LL_TIM_IC_POLARITY_RISING 0x00000000U /*!< The circuit is sensitive to TIxFP1 rising edge, TIxFP1 is not inverted */
-#define LL_TIM_IC_POLARITY_FALLING TIM_CCER_CC1P /*!< The circuit is sensitive to TIxFP1 falling edge, TIxFP1 is inverted */
-#define LL_TIM_IC_POLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< The circuit is sensitive to both TIxFP1 rising and falling edges, TIxFP1 is not inverted */
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EC_CLOCKSOURCE Clock Source
- * @{
- */
-#define LL_TIM_CLOCKSOURCE_INTERNAL 0x00000000U /*!< The timer is clocked by the internal clock provided from the RCC */
-#define LL_TIM_CLOCKSOURCE_EXT_MODE1 (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Counter counts at each rising or falling edge on a selected input*/
-#define LL_TIM_CLOCKSOURCE_EXT_MODE2 TIM_SMCR_ECE /*!< Counter counts at each rising or falling edge on the external trigger input ETR */
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EC_ENCODERMODE Encoder Mode
- * @{
- */
-#define LL_TIM_ENCODERMODE_X2_TI1 TIM_SMCR_SMS_0 /*!< Quadrature encoder mode 1, x2 mode - Counter counts up/down on TI1FP1 edge depending on TI2FP2 level */
-#define LL_TIM_ENCODERMODE_X2_TI2 TIM_SMCR_SMS_1 /*!< Quadrature encoder mode 2, x2 mode - Counter counts up/down on TI2FP2 edge depending on TI1FP1 level */
-#define LL_TIM_ENCODERMODE_X4_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Quadrature encoder mode 3, x4 mode - Counter counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input */
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EC_TRGO Trigger Output
- * @{
- */
-#define LL_TIM_TRGO_RESET 0x00000000U /*!< UG bit from the TIMx_EGR register is used as trigger output */
-#define LL_TIM_TRGO_ENABLE TIM_CR2_MMS_0 /*!< Counter Enable signal (CNT_EN) is used as trigger output */
-#define LL_TIM_TRGO_UPDATE TIM_CR2_MMS_1 /*!< Update event is used as trigger output */
-#define LL_TIM_TRGO_CC1IF (TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< CC1 capture or a compare match is used as trigger output */
-#define LL_TIM_TRGO_OC1REF TIM_CR2_MMS_2 /*!< OC1REF signal is used as trigger output */
-#define LL_TIM_TRGO_OC2REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_0) /*!< OC2REF signal is used as trigger output */
-#define LL_TIM_TRGO_OC3REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1) /*!< OC3REF signal is used as trigger output */
-#define LL_TIM_TRGO_OC4REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< OC4REF signal is used as trigger output */
-/**
- * @}
- */
-
-
-/** @defgroup TIM_LL_EC_SLAVEMODE Slave Mode
- * @{
- */
-#define LL_TIM_SLAVEMODE_DISABLED 0x00000000U /*!< Slave mode disabled */
-#define LL_TIM_SLAVEMODE_RESET TIM_SMCR_SMS_2 /*!< Reset Mode - Rising edge of the selected trigger input (TRGI) reinitializes the counter */
-#define LL_TIM_SLAVEMODE_GATED (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0) /*!< Gated Mode - The counter clock is enabled when the trigger input (TRGI) is high */
-#define LL_TIM_SLAVEMODE_TRIGGER (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1) /*!< Trigger Mode - The counter starts at a rising edge of the trigger TRGI */
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EC_TS Trigger Selection
- * @{
- */
-#define LL_TIM_TS_ITR0 0x00000000U /*!< Internal Trigger 0 (ITR0) is used as trigger input */
-#define LL_TIM_TS_ITR1 TIM_SMCR_TS_0 /*!< Internal Trigger 1 (ITR1) is used as trigger input */
-#define LL_TIM_TS_ITR2 TIM_SMCR_TS_1 /*!< Internal Trigger 2 (ITR2) is used as trigger input */
-#define LL_TIM_TS_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1) /*!< Internal Trigger 3 (ITR3) is used as trigger input */
-#define LL_TIM_TS_TI1F_ED TIM_SMCR_TS_2 /*!< TI1 Edge Detector (TI1F_ED) is used as trigger input */
-#define LL_TIM_TS_TI1FP1 (TIM_SMCR_TS_2 | TIM_SMCR_TS_0) /*!< Filtered Timer Input 1 (TI1FP1) is used as trigger input */
-#define LL_TIM_TS_TI2FP2 (TIM_SMCR_TS_2 | TIM_SMCR_TS_1) /*!< Filtered Timer Input 2 (TI12P2) is used as trigger input */
-#define LL_TIM_TS_ETRF (TIM_SMCR_TS_2 | TIM_SMCR_TS_1 | TIM_SMCR_TS_0) /*!< Filtered external Trigger (ETRF) is used as trigger input */
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EC_ETR_POLARITY External Trigger Polarity
- * @{
- */
-#define LL_TIM_ETR_POLARITY_NONINVERTED 0x00000000U /*!< ETR is non-inverted, active at high level or rising edge */
-#define LL_TIM_ETR_POLARITY_INVERTED TIM_SMCR_ETP /*!< ETR is inverted, active at low level or falling edge */
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EC_ETR_PRESCALER External Trigger Prescaler
- * @{
- */
-#define LL_TIM_ETR_PRESCALER_DIV1 0x00000000U /*!< ETR prescaler OFF */
-#define LL_TIM_ETR_PRESCALER_DIV2 TIM_SMCR_ETPS_0 /*!< ETR frequency is divided by 2 */
-#define LL_TIM_ETR_PRESCALER_DIV4 TIM_SMCR_ETPS_1 /*!< ETR frequency is divided by 4 */
-#define LL_TIM_ETR_PRESCALER_DIV8 TIM_SMCR_ETPS /*!< ETR frequency is divided by 8 */
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EC_ETR_FILTER External Trigger Filter
- * @{
- */
-#define LL_TIM_ETR_FILTER_FDIV1 0x00000000U /*!< No filter, sampling is done at fDTS */
-#define LL_TIM_ETR_FILTER_FDIV1_N2 TIM_SMCR_ETF_0 /*!< fSAMPLING=fCK_INT, N=2 */
-#define LL_TIM_ETR_FILTER_FDIV1_N4 TIM_SMCR_ETF_1 /*!< fSAMPLING=fCK_INT, N=4 */
-#define LL_TIM_ETR_FILTER_FDIV1_N8 (TIM_SMCR_ETF_1 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fCK_INT, N=8 */
-#define LL_TIM_ETR_FILTER_FDIV2_N6 TIM_SMCR_ETF_2 /*!< fSAMPLING=fDTS/2, N=6 */
-#define LL_TIM_ETR_FILTER_FDIV2_N8 (TIM_SMCR_ETF_2 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fDTS/2, N=8 */
-#define LL_TIM_ETR_FILTER_FDIV4_N6 (TIM_SMCR_ETF_2 | TIM_SMCR_ETF_1) /*!< fSAMPLING=fDTS/4, N=6 */
-#define LL_TIM_ETR_FILTER_FDIV4_N8 (TIM_SMCR_ETF_2 | TIM_SMCR_ETF_1 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fDTS/4, N=8 */
-#define LL_TIM_ETR_FILTER_FDIV8_N6 TIM_SMCR_ETF_3 /*!< fSAMPLING=fDTS/8, N=8 */
-#define LL_TIM_ETR_FILTER_FDIV8_N8 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fDTS/16, N=5 */
-#define LL_TIM_ETR_FILTER_FDIV16_N5 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_1) /*!< fSAMPLING=fDTS/16, N=6 */
-#define LL_TIM_ETR_FILTER_FDIV16_N6 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_1 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fDTS/16, N=8 */
-#define LL_TIM_ETR_FILTER_FDIV16_N8 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_2) /*!< fSAMPLING=fDTS/16, N=5 */
-#define LL_TIM_ETR_FILTER_FDIV32_N5 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_2 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fDTS/32, N=5 */
-#define LL_TIM_ETR_FILTER_FDIV32_N6 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_2 | TIM_SMCR_ETF_1) /*!< fSAMPLING=fDTS/32, N=6 */
-#define LL_TIM_ETR_FILTER_FDIV32_N8 TIM_SMCR_ETF /*!< fSAMPLING=fDTS/32, N=8 */
-/**
- * @}
- */
-
-
-/** @defgroup TIM_LL_EC_BREAK_POLARITY break polarity
- * @{
- */
-#define LL_TIM_BREAK_POLARITY_LOW 0x00000000U /*!< Break input BRK is active low */
-#define LL_TIM_BREAK_POLARITY_HIGH TIM_BDTR_BKP /*!< Break input BRK is active high */
-/**
- * @}
- */
-
-
-
-
-/** @defgroup TIM_LL_EC_OSSI OSSI
- * @{
- */
-#define LL_TIM_OSSI_DISABLE 0x00000000U /*!< When inactive, OCx/OCxN outputs are disabled */
-#define LL_TIM_OSSI_ENABLE TIM_BDTR_OSSI /*!< When inactive, OxC/OCxN outputs are first forced with their inactive level then forced to their idle level after the deadtime */
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EC_OSSR OSSR
- * @{
- */
-#define LL_TIM_OSSR_DISABLE 0x00000000U /*!< When inactive, OCx/OCxN outputs are disabled */
-#define LL_TIM_OSSR_ENABLE TIM_BDTR_OSSR /*!< When inactive, OC/OCN outputs are enabled with their inactive level as soon as CCxE=1 or CCxNE=1 */
-/**
- * @}
- */
-
-
-/** @defgroup TIM_LL_EC_DMABURST_BASEADDR DMA Burst Base Address
- * @{
- */
-#define LL_TIM_DMABURST_BASEADDR_CR1 0x00000000U /*!< TIMx_CR1 register is the DMA base address for DMA burst */
-#define LL_TIM_DMABURST_BASEADDR_CR2 TIM_DCR_DBA_0 /*!< TIMx_CR2 register is the DMA base address for DMA burst */
-#define LL_TIM_DMABURST_BASEADDR_SMCR TIM_DCR_DBA_1 /*!< TIMx_SMCR register is the DMA base address for DMA burst */
-#define LL_TIM_DMABURST_BASEADDR_DIER (TIM_DCR_DBA_1 | TIM_DCR_DBA_0) /*!< TIMx_DIER register is the DMA base address for DMA burst */
-#define LL_TIM_DMABURST_BASEADDR_SR TIM_DCR_DBA_2 /*!< TIMx_SR register is the DMA base address for DMA burst */
-#define LL_TIM_DMABURST_BASEADDR_EGR (TIM_DCR_DBA_2 | TIM_DCR_DBA_0) /*!< TIMx_EGR register is the DMA base address for DMA burst */
-#define LL_TIM_DMABURST_BASEADDR_CCMR1 (TIM_DCR_DBA_2 | TIM_DCR_DBA_1) /*!< TIMx_CCMR1 register is the DMA base address for DMA burst */
-#define LL_TIM_DMABURST_BASEADDR_CCMR2 (TIM_DCR_DBA_2 | TIM_DCR_DBA_1 | TIM_DCR_DBA_0) /*!< TIMx_CCMR2 register is the DMA base address for DMA burst */
-#define LL_TIM_DMABURST_BASEADDR_CCER TIM_DCR_DBA_3 /*!< TIMx_CCER register is the DMA base address for DMA burst */
-#define LL_TIM_DMABURST_BASEADDR_CNT (TIM_DCR_DBA_3 | TIM_DCR_DBA_0) /*!< TIMx_CNT register is the DMA base address for DMA burst */
-#define LL_TIM_DMABURST_BASEADDR_PSC (TIM_DCR_DBA_3 | TIM_DCR_DBA_1) /*!< TIMx_PSC register is the DMA base address for DMA burst */
-#define LL_TIM_DMABURST_BASEADDR_ARR (TIM_DCR_DBA_3 | TIM_DCR_DBA_1 | TIM_DCR_DBA_0) /*!< TIMx_ARR register is the DMA base address for DMA burst */
-#define LL_TIM_DMABURST_BASEADDR_RCR (TIM_DCR_DBA_3 | TIM_DCR_DBA_2) /*!< TIMx_RCR register is the DMA base address for DMA burst */
-#define LL_TIM_DMABURST_BASEADDR_CCR1 (TIM_DCR_DBA_3 | TIM_DCR_DBA_2 | TIM_DCR_DBA_0) /*!< TIMx_CCR1 register is the DMA base address for DMA burst */
-#define LL_TIM_DMABURST_BASEADDR_CCR2 (TIM_DCR_DBA_3 | TIM_DCR_DBA_2 | TIM_DCR_DBA_1) /*!< TIMx_CCR2 register is the DMA base address for DMA burst */
-#define LL_TIM_DMABURST_BASEADDR_CCR3 (TIM_DCR_DBA_3 | TIM_DCR_DBA_2 | TIM_DCR_DBA_1 | TIM_DCR_DBA_0) /*!< TIMx_CCR3 register is the DMA base address for DMA burst */
-#define LL_TIM_DMABURST_BASEADDR_CCR4 TIM_DCR_DBA_4 /*!< TIMx_CCR4 register is the DMA base address for DMA burst */
-#define LL_TIM_DMABURST_BASEADDR_BDTR (TIM_DCR_DBA_4 | TIM_DCR_DBA_0) /*!< TIMx_BDTR register is the DMA base address for DMA burst */
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EC_DMABURST_LENGTH DMA Burst Length
- * @{
- */
-#define LL_TIM_DMABURST_LENGTH_1TRANSFER 0x00000000U /*!< Transfer is done to 1 register starting from the DMA burst base address */
-#define LL_TIM_DMABURST_LENGTH_2TRANSFERS TIM_DCR_DBL_0 /*!< Transfer is done to 2 registers starting from the DMA burst base address */
-#define LL_TIM_DMABURST_LENGTH_3TRANSFERS TIM_DCR_DBL_1 /*!< Transfer is done to 3 registers starting from the DMA burst base address */
-#define LL_TIM_DMABURST_LENGTH_4TRANSFERS (TIM_DCR_DBL_1 | TIM_DCR_DBL_0) /*!< Transfer is done to 4 registers starting from the DMA burst base address */
-#define LL_TIM_DMABURST_LENGTH_5TRANSFERS TIM_DCR_DBL_2 /*!< Transfer is done to 5 registers starting from the DMA burst base address */
-#define LL_TIM_DMABURST_LENGTH_6TRANSFERS (TIM_DCR_DBL_2 | TIM_DCR_DBL_0) /*!< Transfer is done to 6 registers starting from the DMA burst base address */
-#define LL_TIM_DMABURST_LENGTH_7TRANSFERS (TIM_DCR_DBL_2 | TIM_DCR_DBL_1) /*!< Transfer is done to 7 registers starting from the DMA burst base address */
-#define LL_TIM_DMABURST_LENGTH_8TRANSFERS (TIM_DCR_DBL_2 | TIM_DCR_DBL_1 | TIM_DCR_DBL_0) /*!< Transfer is done to 1 registers starting from the DMA burst base address */
-#define LL_TIM_DMABURST_LENGTH_9TRANSFERS TIM_DCR_DBL_3 /*!< Transfer is done to 9 registers starting from the DMA burst base address */
-#define LL_TIM_DMABURST_LENGTH_10TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_0) /*!< Transfer is done to 10 registers starting from the DMA burst base address */
-#define LL_TIM_DMABURST_LENGTH_11TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_1) /*!< Transfer is done to 11 registers starting from the DMA burst base address */
-#define LL_TIM_DMABURST_LENGTH_12TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_1 | TIM_DCR_DBL_0) /*!< Transfer is done to 12 registers starting from the DMA burst base address */
-#define LL_TIM_DMABURST_LENGTH_13TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_2) /*!< Transfer is done to 13 registers starting from the DMA burst base address */
-#define LL_TIM_DMABURST_LENGTH_14TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_2 | TIM_DCR_DBL_0) /*!< Transfer is done to 14 registers starting from the DMA burst base address */
-#define LL_TIM_DMABURST_LENGTH_15TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_2 | TIM_DCR_DBL_1) /*!< Transfer is done to 15 registers starting from the DMA burst base address */
-#define LL_TIM_DMABURST_LENGTH_16TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_2 | TIM_DCR_DBL_1 | TIM_DCR_DBL_0) /*!< Transfer is done to 16 registers starting from the DMA burst base address */
-#define LL_TIM_DMABURST_LENGTH_17TRANSFERS TIM_DCR_DBL_4 /*!< Transfer is done to 17 registers starting from the DMA burst base address */
-#define LL_TIM_DMABURST_LENGTH_18TRANSFERS (TIM_DCR_DBL_4 | TIM_DCR_DBL_0) /*!< Transfer is done to 18 registers starting from the DMA burst base address */
-/**
- * @}
- */
-
-
-#define LL_TIM_TIM14_TI1_RMP_GPIO TIM14_OR_RMP_MASK /*!< TIM14_TI1 is connected to Ored GPIO */
-#define LL_TIM_TIM14_TI1_RMP_RTC_CLK (TIM14_OR_TI1_RMP_0 | TIM14_OR_RMP_MASK) /*!< TIM14_TI1 is connected to RTC clock */
-#define LL_TIM_TIM14_TI1_RMP_HSE (TIM14_OR_TI1_RMP_1 | TIM14_OR_RMP_MASK) /*!< TIM14_TI1 is connected to HSE/32 clock */
-#define LL_TIM_TIM14_TI1_RMP_MCO (TIM14_OR_TI1_RMP_0 | TIM14_OR_TI1_RMP_1 | TIM14_OR_RMP_MASK) /*!< TIM14_TI1 is connected to MCO */
-
-
-/** @defgroup TIM_LL_EC_OCREF_CLR_INT OCREF clear input selection
- * @{
- */
-#define LL_TIM_OCREF_CLR_INT_OCREF_CLR 0x00000000U /*!< OCREF_CLR_INT is connected to the OCREF_CLR input */
-#define LL_TIM_OCREF_CLR_INT_ETR TIM_SMCR_OCCS /*!< OCREF_CLR_INT is connected to ETRF */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported macro ------------------------------------------------------------*/
-/** @defgroup TIM_LL_Exported_Macros TIM Exported Macros
- * @{
- */
-
-/** @defgroup TIM_LL_EM_WRITE_READ Common Write and read registers Macros
- * @{
- */
-/**
- * @brief Write a value in TIM register.
- * @param __INSTANCE__ TIM Instance
- * @param __REG__ Register to be written
- * @param __VALUE__ Value to be written in the register
- * @retval None
- */
-#define LL_TIM_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG((__INSTANCE__)->__REG__, (__VALUE__))
-
-/**
- * @brief Read a value in TIM register.
- * @param __INSTANCE__ TIM Instance
- * @param __REG__ Register to be read
- * @retval Register value
- */
-#define LL_TIM_ReadReg(__INSTANCE__, __REG__) READ_REG((__INSTANCE__)->__REG__)
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EM_Exported_Macros Exported_Macros
- * @{
- */
-
-/**
- * @brief HELPER macro calculating DTG[0:7] in the TIMx_BDTR register to achieve the requested dead time duration.
- * @note ex: @ref __LL_TIM_CALC_DEADTIME (80000000, @ref LL_TIM_GetClockDivision (), 120);
- * @param __TIMCLK__ timer input clock frequency (in Hz)
- * @param __CKD__ This parameter can be one of the following values:
- * @arg @ref LL_TIM_CLOCKDIVISION_DIV1
- * @arg @ref LL_TIM_CLOCKDIVISION_DIV2
- * @arg @ref LL_TIM_CLOCKDIVISION_DIV4
- * @param __DT__ deadtime duration (in ns)
- * @retval DTG[0:7]
- */
-#define __LL_TIM_CALC_DEADTIME(__TIMCLK__, __CKD__, __DT__) \
- ( (((uint64_t)((__DT__)*1000U)) < ((DT_DELAY_1+1U) * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? (uint8_t)(((uint64_t)((__DT__)*1000U) / TIM_CALC_DTS((__TIMCLK__), (__CKD__))) & DT_DELAY_1) : \
- (((uint64_t)((__DT__)*1000U)) < ((64U + (DT_DELAY_2+1U)) * 2U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? (uint8_t)(DT_RANGE_2 | ((uint8_t)((uint8_t)((((uint64_t)((__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), (__CKD__))) >> 1U) - (uint8_t) 64) & DT_DELAY_2)) :\
- (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_3+1U)) * 8U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? (uint8_t)(DT_RANGE_3 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), (__CKD__))) >> 3U) - (uint8_t) 32) & DT_DELAY_3)) :\
- (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_4+1U)) * 16U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? (uint8_t)(DT_RANGE_4 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), (__CKD__))) >> 4U) - (uint8_t) 32) & DT_DELAY_4)) :\
- 0U)
-
-/**
- * @brief HELPER macro calculating the prescaler value to achieve the required counter clock frequency.
- * @note ex: @ref __LL_TIM_CALC_PSC (80000000, 1000000);
- * @param __TIMCLK__ timer input clock frequency (in Hz)
- * @param __CNTCLK__ counter clock frequency (in Hz)
- * @retval Prescaler value (between Min_Data=0 and Max_Data=65535)
- */
-#define __LL_TIM_CALC_PSC(__TIMCLK__, __CNTCLK__) \
- (((__TIMCLK__) >= (__CNTCLK__)) ? (uint32_t)(((__TIMCLK__)/(__CNTCLK__)) - 1U) : 0U)
-
-/**
- * @brief HELPER macro calculating the auto-reload value to achieve the required output signal frequency.
- * @note ex: @ref __LL_TIM_CALC_ARR (1000000, @ref LL_TIM_GetPrescaler (), 10000);
- * @param __TIMCLK__ timer input clock frequency (in Hz)
- * @param __PSC__ prescaler
- * @param __FREQ__ output signal frequency (in Hz)
- * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535)
- */
-#define __LL_TIM_CALC_ARR(__TIMCLK__, __PSC__, __FREQ__) \
- ((((__TIMCLK__)/((__PSC__) + 1U)) >= (__FREQ__)) ? (((__TIMCLK__)/((__FREQ__) * ((__PSC__) + 1U))) - 1U) : 0U)
-
-/**
- * @brief HELPER macro calculating the compare value required to achieve the required timer output compare active/inactive delay.
- * @note ex: @ref __LL_TIM_CALC_DELAY (1000000, @ref LL_TIM_GetPrescaler (), 10);
- * @param __TIMCLK__ timer input clock frequency (in Hz)
- * @param __PSC__ prescaler
- * @param __DELAY__ timer output compare active/inactive delay (in us)
- * @retval Compare value (between Min_Data=0 and Max_Data=65535)
- */
-#define __LL_TIM_CALC_DELAY(__TIMCLK__, __PSC__, __DELAY__) \
- ((uint32_t)(((uint64_t)(__TIMCLK__) * (uint64_t)(__DELAY__)) \
- / ((uint64_t)1000000U * (uint64_t)((__PSC__) + 1U))))
-
-/**
- * @brief HELPER macro calculating the auto-reload value to achieve the required pulse duration (when the timer operates in one pulse mode).
- * @note ex: @ref __LL_TIM_CALC_PULSE (1000000, @ref LL_TIM_GetPrescaler (), 10, 20);
- * @param __TIMCLK__ timer input clock frequency (in Hz)
- * @param __PSC__ prescaler
- * @param __DELAY__ timer output compare active/inactive delay (in us)
- * @param __PULSE__ pulse duration (in us)
- * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535)
- */
-#define __LL_TIM_CALC_PULSE(__TIMCLK__, __PSC__, __DELAY__, __PULSE__) \
- ((uint32_t)(__LL_TIM_CALC_DELAY((__TIMCLK__), (__PSC__), (__PULSE__)) \
- + __LL_TIM_CALC_DELAY((__TIMCLK__), (__PSC__), (__DELAY__))))
-
-/**
- * @brief HELPER macro retrieving the ratio of the input capture prescaler
- * @note ex: @ref __LL_TIM_GET_ICPSC_RATIO (@ref LL_TIM_IC_GetPrescaler ());
- * @param __ICPSC__ This parameter can be one of the following values:
- * @arg @ref LL_TIM_ICPSC_DIV1
- * @arg @ref LL_TIM_ICPSC_DIV2
- * @arg @ref LL_TIM_ICPSC_DIV4
- * @arg @ref LL_TIM_ICPSC_DIV8
- * @retval Input capture prescaler ratio (1, 2, 4 or 8)
- */
-#define __LL_TIM_GET_ICPSC_RATIO(__ICPSC__) \
- ((uint32_t)(0x01U << (((__ICPSC__) >> 16U) >> TIM_CCMR1_IC1PSC_Pos)))
-
-
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup TIM_LL_Exported_Functions TIM Exported Functions
- * @{
- */
-
-/** @defgroup TIM_LL_EF_Time_Base Time Base configuration
- * @{
- */
-/**
- * @brief Enable timer counter.
- * @rmtoll CR1 CEN LL_TIM_EnableCounter
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_EnableCounter(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->CR1, TIM_CR1_CEN);
-}
-
-/**
- * @brief Disable timer counter.
- * @rmtoll CR1 CEN LL_TIM_DisableCounter
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_DisableCounter(TIM_TypeDef *TIMx)
-{
- CLEAR_BIT(TIMx->CR1, TIM_CR1_CEN);
-}
-
-/**
- * @brief Indicates whether the timer counter is enabled.
- * @rmtoll CR1 CEN LL_TIM_IsEnabledCounter
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsEnabledCounter(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->CR1, TIM_CR1_CEN) == (TIM_CR1_CEN)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Enable update event generation.
- * @rmtoll CR1 UDIS LL_TIM_EnableUpdateEvent
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_EnableUpdateEvent(TIM_TypeDef *TIMx)
-{
- CLEAR_BIT(TIMx->CR1, TIM_CR1_UDIS);
-}
-
-/**
- * @brief Disable update event generation.
- * @rmtoll CR1 UDIS LL_TIM_DisableUpdateEvent
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_DisableUpdateEvent(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->CR1, TIM_CR1_UDIS);
-}
-
-/**
- * @brief Indicates whether update event generation is enabled.
- * @rmtoll CR1 UDIS LL_TIM_IsEnabledUpdateEvent
- * @param TIMx Timer instance
- * @retval Inverted state of bit (0 or 1).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsEnabledUpdateEvent(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->CR1, TIM_CR1_UDIS) == (uint32_t)RESET) ? 1UL : 0UL);
-}
-
-/**
- * @brief Set update event source
- * @note Update event source set to LL_TIM_UPDATESOURCE_REGULAR: any of the following events
- * generate an update interrupt or DMA request if enabled:
- * - Counter overflow/underflow
- * - Setting the UG bit
- * - Update generation through the slave mode controller
- * @note Update event source set to LL_TIM_UPDATESOURCE_COUNTER: only counter
- * overflow/underflow generates an update interrupt or DMA request if enabled.
- * @rmtoll CR1 URS LL_TIM_SetUpdateSource
- * @param TIMx Timer instance
- * @param UpdateSource This parameter can be one of the following values:
- * @arg @ref LL_TIM_UPDATESOURCE_REGULAR
- * @arg @ref LL_TIM_UPDATESOURCE_COUNTER
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_SetUpdateSource(TIM_TypeDef *TIMx, uint32_t UpdateSource)
-{
- MODIFY_REG(TIMx->CR1, TIM_CR1_URS, UpdateSource);
-}
-
-/**
- * @brief Get actual event update source
- * @rmtoll CR1 URS LL_TIM_GetUpdateSource
- * @param TIMx Timer instance
- * @retval Returned value can be one of the following values:
- * @arg @ref LL_TIM_UPDATESOURCE_REGULAR
- * @arg @ref LL_TIM_UPDATESOURCE_COUNTER
- */
-__STATIC_INLINE uint32_t LL_TIM_GetUpdateSource(TIM_TypeDef *TIMx)
-{
- return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_URS));
-}
-
-/**
- * @brief Set one pulse mode (one shot v.s. repetitive).
- * @rmtoll CR1 OPM LL_TIM_SetOnePulseMode
- * @param TIMx Timer instance
- * @param OnePulseMode This parameter can be one of the following values:
- * @arg @ref LL_TIM_ONEPULSEMODE_SINGLE
- * @arg @ref LL_TIM_ONEPULSEMODE_REPETITIVE
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_SetOnePulseMode(TIM_TypeDef *TIMx, uint32_t OnePulseMode)
-{
- MODIFY_REG(TIMx->CR1, TIM_CR1_OPM, OnePulseMode);
-}
-
-/**
- * @brief Get actual one pulse mode.
- * @rmtoll CR1 OPM LL_TIM_GetOnePulseMode
- * @param TIMx Timer instance
- * @retval Returned value can be one of the following values:
- * @arg @ref LL_TIM_ONEPULSEMODE_SINGLE
- * @arg @ref LL_TIM_ONEPULSEMODE_REPETITIVE
- */
-__STATIC_INLINE uint32_t LL_TIM_GetOnePulseMode(TIM_TypeDef *TIMx)
-{
- return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_OPM));
-}
-
-/**
- * @brief Set the timer counter counting mode.
- * @note Macro IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to
- * check whether or not the counter mode selection feature is supported
- * by a timer instance.
- * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse)
- * requires a timer reset to avoid unexpected direction
- * due to DIR bit readonly in center aligned mode.
- * @rmtoll CR1 DIR LL_TIM_SetCounterMode\n
- * CR1 CMS LL_TIM_SetCounterMode
- * @param TIMx Timer instance
- * @param CounterMode This parameter can be one of the following values:
- * @arg @ref LL_TIM_COUNTERMODE_UP
- * @arg @ref LL_TIM_COUNTERMODE_DOWN
- * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP
- * @arg @ref LL_TIM_COUNTERMODE_CENTER_DOWN
- * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP_DOWN
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_SetCounterMode(TIM_TypeDef *TIMx, uint32_t CounterMode)
-{
- MODIFY_REG(TIMx->CR1, (TIM_CR1_DIR | TIM_CR1_CMS), CounterMode);
-}
-
-/**
- * @brief Get actual counter mode.
- * @note Macro IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to
- * check whether or not the counter mode selection feature is supported
- * by a timer instance.
- * @rmtoll CR1 DIR LL_TIM_GetCounterMode\n
- * CR1 CMS LL_TIM_GetCounterMode
- * @param TIMx Timer instance
- * @retval Returned value can be one of the following values:
- * @arg @ref LL_TIM_COUNTERMODE_UP
- * @arg @ref LL_TIM_COUNTERMODE_DOWN
- * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP
- * @arg @ref LL_TIM_COUNTERMODE_CENTER_DOWN
- * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP_DOWN
- */
-__STATIC_INLINE uint32_t LL_TIM_GetCounterMode(TIM_TypeDef *TIMx)
-{
- return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR | TIM_CR1_CMS));
-}
-
-/**
- * @brief Enable auto-reload (ARR) preload.
- * @rmtoll CR1 ARPE LL_TIM_EnableARRPreload
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_EnableARRPreload(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->CR1, TIM_CR1_ARPE);
-}
-
-/**
- * @brief Disable auto-reload (ARR) preload.
- * @rmtoll CR1 ARPE LL_TIM_DisableARRPreload
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_DisableARRPreload(TIM_TypeDef *TIMx)
-{
- CLEAR_BIT(TIMx->CR1, TIM_CR1_ARPE);
-}
-
-/**
- * @brief Indicates whether auto-reload (ARR) preload is enabled.
- * @rmtoll CR1 ARPE LL_TIM_IsEnabledARRPreload
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsEnabledARRPreload(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->CR1, TIM_CR1_ARPE) == (TIM_CR1_ARPE)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Set the division ratio between the timer clock and the sampling clock used by the dead-time generators (when supported) and the digital filters.
- * @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check
- * whether or not the clock division feature is supported by the timer
- * instance.
- * @rmtoll CR1 CKD LL_TIM_SetClockDivision
- * @param TIMx Timer instance
- * @param ClockDivision This parameter can be one of the following values:
- * @arg @ref LL_TIM_CLOCKDIVISION_DIV1
- * @arg @ref LL_TIM_CLOCKDIVISION_DIV2
- * @arg @ref LL_TIM_CLOCKDIVISION_DIV4
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_SetClockDivision(TIM_TypeDef *TIMx, uint32_t ClockDivision)
-{
- MODIFY_REG(TIMx->CR1, TIM_CR1_CKD, ClockDivision);
-}
-
-/**
- * @brief Get the actual division ratio between the timer clock and the sampling clock used by the dead-time generators (when supported) and the digital filters.
- * @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check
- * whether or not the clock division feature is supported by the timer
- * instance.
- * @rmtoll CR1 CKD LL_TIM_GetClockDivision
- * @param TIMx Timer instance
- * @retval Returned value can be one of the following values:
- * @arg @ref LL_TIM_CLOCKDIVISION_DIV1
- * @arg @ref LL_TIM_CLOCKDIVISION_DIV2
- * @arg @ref LL_TIM_CLOCKDIVISION_DIV4
- */
-__STATIC_INLINE uint32_t LL_TIM_GetClockDivision(TIM_TypeDef *TIMx)
-{
- return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_CKD));
-}
-
-/**
- * @brief Set the counter value.
- * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
- * whether or not a timer instance supports a 32 bits counter.
- * @rmtoll CNT CNT LL_TIM_SetCounter
- * @param TIMx Timer instance
- * @param Counter Counter value (between Min_Data=0 and Max_Data=0xFFFF or 0xFFFFFFFF)
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_SetCounter(TIM_TypeDef *TIMx, uint32_t Counter)
-{
- WRITE_REG(TIMx->CNT, Counter);
-}
-
-/**
- * @brief Get the counter value.
- * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
- * whether or not a timer instance supports a 32 bits counter.
- * @rmtoll CNT CNT LL_TIM_GetCounter
- * @param TIMx Timer instance
- * @retval Counter value (between Min_Data=0 and Max_Data=0xFFFF or 0xFFFFFFFF)
- */
-__STATIC_INLINE uint32_t LL_TIM_GetCounter(TIM_TypeDef *TIMx)
-{
- return (uint32_t)(READ_REG(TIMx->CNT));
-}
-
-/**
- * @brief Get the current direction of the counter
- * @rmtoll CR1 DIR LL_TIM_GetDirection
- * @param TIMx Timer instance
- * @retval Returned value can be one of the following values:
- * @arg @ref LL_TIM_COUNTERDIRECTION_UP
- * @arg @ref LL_TIM_COUNTERDIRECTION_DOWN
- */
-__STATIC_INLINE uint32_t LL_TIM_GetDirection(TIM_TypeDef *TIMx)
-{
- return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR));
-}
-
-/**
- * @brief Set the prescaler value.
- * @note The counter clock frequency CK_CNT is equal to fCK_PSC / (PSC[15:0] + 1).
- * @note The prescaler can be changed on the fly as this control register is buffered. The new
- * prescaler ratio is taken into account at the next update event.
- * @note Helper macro @ref __LL_TIM_CALC_PSC can be used to calculate the Prescaler parameter
- * @rmtoll PSC PSC LL_TIM_SetPrescaler
- * @param TIMx Timer instance
- * @param Prescaler between Min_Data=0 and Max_Data=65535
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Prescaler)
-{
- WRITE_REG(TIMx->PSC, Prescaler);
-}
-
-/**
- * @brief Get the prescaler value.
- * @rmtoll PSC PSC LL_TIM_GetPrescaler
- * @param TIMx Timer instance
- * @retval Prescaler value between Min_Data=0 and Max_Data=65535
- */
-__STATIC_INLINE uint32_t LL_TIM_GetPrescaler(TIM_TypeDef *TIMx)
-{
- return (uint32_t)(READ_REG(TIMx->PSC));
-}
-
-/**
- * @brief Set the auto-reload value.
- * @note The counter is blocked while the auto-reload value is null.
- * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
- * whether or not a timer instance supports a 32 bits counter.
- * @note Helper macro @ref __LL_TIM_CALC_ARR can be used to calculate the AutoReload parameter
- * @rmtoll ARR ARR LL_TIM_SetAutoReload
- * @param TIMx Timer instance
- * @param AutoReload between Min_Data=0 and Max_Data=65535
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_SetAutoReload(TIM_TypeDef *TIMx, uint32_t AutoReload)
-{
- WRITE_REG(TIMx->ARR, AutoReload);
-}
-
-/**
- * @brief Get the auto-reload value.
- * @rmtoll ARR ARR LL_TIM_GetAutoReload
- * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
- * whether or not a timer instance supports a 32 bits counter.
- * @param TIMx Timer instance
- * @retval Auto-reload value
- */
-__STATIC_INLINE uint32_t LL_TIM_GetAutoReload(TIM_TypeDef *TIMx)
-{
- return (uint32_t)(READ_REG(TIMx->ARR));
-}
-
-/**
- * @brief Set the repetition counter value.
- * @note Macro IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check
- * whether or not a timer instance supports a repetition counter.
- * @rmtoll RCR REP LL_TIM_SetRepetitionCounter
- * @param TIMx Timer instance
- * @param RepetitionCounter between Min_Data=0 and Max_Data=255
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_SetRepetitionCounter(TIM_TypeDef *TIMx, uint32_t RepetitionCounter)
-{
- WRITE_REG(TIMx->RCR, RepetitionCounter);
-}
-
-/**
- * @brief Get the repetition counter value.
- * @note Macro IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check
- * whether or not a timer instance supports a repetition counter.
- * @rmtoll RCR REP LL_TIM_GetRepetitionCounter
- * @param TIMx Timer instance
- * @retval Repetition counter value
- */
-__STATIC_INLINE uint32_t LL_TIM_GetRepetitionCounter(TIM_TypeDef *TIMx)
-{
- return (uint32_t)(READ_REG(TIMx->RCR));
-}
-
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EF_Capture_Compare Capture Compare configuration
- * @{
- */
-/**
- * @brief Enable the capture/compare control bits (CCxE, CCxNE and OCxM) preload.
- * @note CCxE, CCxNE and OCxM bits are preloaded, after having been written,
- * they are updated only when a commutation event (COM) occurs.
- * @note Only on channels that have a complementary output.
- * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check
- * whether or not a timer instance is able to generate a commutation event.
- * @rmtoll CR2 CCPC LL_TIM_CC_EnablePreload
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_CC_EnablePreload(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->CR2, TIM_CR2_CCPC);
-}
-
-/**
- * @brief Disable the capture/compare control bits (CCxE, CCxNE and OCxM) preload.
- * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check
- * whether or not a timer instance is able to generate a commutation event.
- * @rmtoll CR2 CCPC LL_TIM_CC_DisablePreload
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_CC_DisablePreload(TIM_TypeDef *TIMx)
-{
- CLEAR_BIT(TIMx->CR2, TIM_CR2_CCPC);
-}
-
-/**
- * @brief Set the updated source of the capture/compare control bits (CCxE, CCxNE and OCxM).
- * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check
- * whether or not a timer instance is able to generate a commutation event.
- * @rmtoll CR2 CCUS LL_TIM_CC_SetUpdate
- * @param TIMx Timer instance
- * @param CCUpdateSource This parameter can be one of the following values:
- * @arg @ref LL_TIM_CCUPDATESOURCE_COMG_ONLY
- * @arg @ref LL_TIM_CCUPDATESOURCE_COMG_AND_TRGI
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_CC_SetUpdate(TIM_TypeDef *TIMx, uint32_t CCUpdateSource)
-{
- MODIFY_REG(TIMx->CR2, TIM_CR2_CCUS, CCUpdateSource);
-}
-
-/**
- * @brief Set the trigger of the capture/compare DMA request.
- * @rmtoll CR2 CCDS LL_TIM_CC_SetDMAReqTrigger
- * @param TIMx Timer instance
- * @param DMAReqTrigger This parameter can be one of the following values:
- * @arg @ref LL_TIM_CCDMAREQUEST_CC
- * @arg @ref LL_TIM_CCDMAREQUEST_UPDATE
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_CC_SetDMAReqTrigger(TIM_TypeDef *TIMx, uint32_t DMAReqTrigger)
-{
- MODIFY_REG(TIMx->CR2, TIM_CR2_CCDS, DMAReqTrigger);
-}
-
-/**
- * @brief Get actual trigger of the capture/compare DMA request.
- * @rmtoll CR2 CCDS LL_TIM_CC_GetDMAReqTrigger
- * @param TIMx Timer instance
- * @retval Returned value can be one of the following values:
- * @arg @ref LL_TIM_CCDMAREQUEST_CC
- * @arg @ref LL_TIM_CCDMAREQUEST_UPDATE
- */
-__STATIC_INLINE uint32_t LL_TIM_CC_GetDMAReqTrigger(TIM_TypeDef *TIMx)
-{
- return (uint32_t)(READ_BIT(TIMx->CR2, TIM_CR2_CCDS));
-}
-
-/**
- * @brief Set the lock level to freeze the
- * configuration of several capture/compare parameters.
- * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
- * the lock mechanism is supported by a timer instance.
- * @rmtoll BDTR LOCK LL_TIM_CC_SetLockLevel
- * @param TIMx Timer instance
- * @param LockLevel This parameter can be one of the following values:
- * @arg @ref LL_TIM_LOCKLEVEL_OFF
- * @arg @ref LL_TIM_LOCKLEVEL_1
- * @arg @ref LL_TIM_LOCKLEVEL_2
- * @arg @ref LL_TIM_LOCKLEVEL_3
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_CC_SetLockLevel(TIM_TypeDef *TIMx, uint32_t LockLevel)
-{
- MODIFY_REG(TIMx->BDTR, TIM_BDTR_LOCK, LockLevel);
-}
-
-/**
- * @brief Enable capture/compare channels.
- * @rmtoll CCER CC1E LL_TIM_CC_EnableChannel\n
- * CCER CC1NE LL_TIM_CC_EnableChannel\n
- * CCER CC2E LL_TIM_CC_EnableChannel\n
- * CCER CC2NE LL_TIM_CC_EnableChannel\n
- * CCER CC3E LL_TIM_CC_EnableChannel\n
- * CCER CC3NE LL_TIM_CC_EnableChannel\n
- * CCER CC4E LL_TIM_CC_EnableChannel
- * @param TIMx Timer instance
- * @param Channels This parameter can be a combination of the following values:
- * @arg @ref LL_TIM_CHANNEL_CH1
- * @arg @ref LL_TIM_CHANNEL_CH1N
- * @arg @ref LL_TIM_CHANNEL_CH2
- * @arg @ref LL_TIM_CHANNEL_CH2N
- * @arg @ref LL_TIM_CHANNEL_CH3
- * @arg @ref LL_TIM_CHANNEL_CH3N
- * @arg @ref LL_TIM_CHANNEL_CH4
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_CC_EnableChannel(TIM_TypeDef *TIMx, uint32_t Channels)
-{
- SET_BIT(TIMx->CCER, Channels);
-}
-
-/**
- * @brief Disable capture/compare channels.
- * @rmtoll CCER CC1E LL_TIM_CC_DisableChannel\n
- * CCER CC1NE LL_TIM_CC_DisableChannel\n
- * CCER CC2E LL_TIM_CC_DisableChannel\n
- * CCER CC2NE LL_TIM_CC_DisableChannel\n
- * CCER CC3E LL_TIM_CC_DisableChannel\n
- * CCER CC3NE LL_TIM_CC_DisableChannel\n
- * CCER CC4E LL_TIM_CC_DisableChannel
- * @param TIMx Timer instance
- * @param Channels This parameter can be a combination of the following values:
- * @arg @ref LL_TIM_CHANNEL_CH1
- * @arg @ref LL_TIM_CHANNEL_CH1N
- * @arg @ref LL_TIM_CHANNEL_CH2
- * @arg @ref LL_TIM_CHANNEL_CH2N
- * @arg @ref LL_TIM_CHANNEL_CH3
- * @arg @ref LL_TIM_CHANNEL_CH3N
- * @arg @ref LL_TIM_CHANNEL_CH4
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_CC_DisableChannel(TIM_TypeDef *TIMx, uint32_t Channels)
-{
- CLEAR_BIT(TIMx->CCER, Channels);
-}
-
-/**
- * @brief Indicate whether channel(s) is(are) enabled.
- * @rmtoll CCER CC1E LL_TIM_CC_IsEnabledChannel\n
- * CCER CC1NE LL_TIM_CC_IsEnabledChannel\n
- * CCER CC2E LL_TIM_CC_IsEnabledChannel\n
- * CCER CC2NE LL_TIM_CC_IsEnabledChannel\n
- * CCER CC3E LL_TIM_CC_IsEnabledChannel\n
- * CCER CC3NE LL_TIM_CC_IsEnabledChannel\n
- * CCER CC4E LL_TIM_CC_IsEnabledChannel
- * @param TIMx Timer instance
- * @param Channels This parameter can be a combination of the following values:
- * @arg @ref LL_TIM_CHANNEL_CH1
- * @arg @ref LL_TIM_CHANNEL_CH1N
- * @arg @ref LL_TIM_CHANNEL_CH2
- * @arg @ref LL_TIM_CHANNEL_CH2N
- * @arg @ref LL_TIM_CHANNEL_CH3
- * @arg @ref LL_TIM_CHANNEL_CH3N
- * @arg @ref LL_TIM_CHANNEL_CH4
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_CC_IsEnabledChannel(TIM_TypeDef *TIMx, uint32_t Channels)
-{
- return ((READ_BIT(TIMx->CCER, Channels) == (Channels)) ? 1UL : 0UL);
-}
-
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EF_Output_Channel Output channel configuration
- * @{
- */
-/**
- * @brief Configure an output channel.
- * @rmtoll CCMR1 CC1S LL_TIM_OC_ConfigOutput\n
- * CCMR1 CC2S LL_TIM_OC_ConfigOutput\n
- * CCMR2 CC3S LL_TIM_OC_ConfigOutput\n
- * CCMR2 CC4S LL_TIM_OC_ConfigOutput\n
- * CCER CC1P LL_TIM_OC_ConfigOutput\n
- * CCER CC2P LL_TIM_OC_ConfigOutput\n
- * CCER CC3P LL_TIM_OC_ConfigOutput\n
- * CCER CC4P LL_TIM_OC_ConfigOutput\n
- * CR2 OIS1 LL_TIM_OC_ConfigOutput\n
- * CR2 OIS2 LL_TIM_OC_ConfigOutput\n
- * CR2 OIS3 LL_TIM_OC_ConfigOutput\n
- * CR2 OIS4 LL_TIM_OC_ConfigOutput
- * @param TIMx Timer instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_TIM_CHANNEL_CH1
- * @arg @ref LL_TIM_CHANNEL_CH2
- * @arg @ref LL_TIM_CHANNEL_CH3
- * @arg @ref LL_TIM_CHANNEL_CH4
- * @param Configuration This parameter must be a combination of all the following values:
- * @arg @ref LL_TIM_OCPOLARITY_HIGH or @ref LL_TIM_OCPOLARITY_LOW
- * @arg @ref LL_TIM_OCIDLESTATE_LOW or @ref LL_TIM_OCIDLESTATE_HIGH
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_OC_ConfigOutput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration)
-{
- register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- register __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
- CLEAR_BIT(*pReg, (TIM_CCMR1_CC1S << SHIFT_TAB_OCxx[iChannel]));
- MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]),
- (Configuration & TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]);
- MODIFY_REG(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel]),
- (Configuration & TIM_CR2_OIS1) << SHIFT_TAB_OISx[iChannel]);
-}
-
-/**
- * @brief Define the behavior of the output reference signal OCxREF from which
- * OCx and OCxN (when relevant) are derived.
- * @rmtoll CCMR1 OC1M LL_TIM_OC_SetMode\n
- * CCMR1 OC2M LL_TIM_OC_SetMode\n
- * CCMR2 OC3M LL_TIM_OC_SetMode\n
- * CCMR2 OC4M LL_TIM_OC_SetMode
- * @param TIMx Timer instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_TIM_CHANNEL_CH1
- * @arg @ref LL_TIM_CHANNEL_CH2
- * @arg @ref LL_TIM_CHANNEL_CH3
- * @arg @ref LL_TIM_CHANNEL_CH4
- * @param Mode This parameter can be one of the following values:
- * @arg @ref LL_TIM_OCMODE_FROZEN
- * @arg @ref LL_TIM_OCMODE_ACTIVE
- * @arg @ref LL_TIM_OCMODE_INACTIVE
- * @arg @ref LL_TIM_OCMODE_TOGGLE
- * @arg @ref LL_TIM_OCMODE_FORCED_INACTIVE
- * @arg @ref LL_TIM_OCMODE_FORCED_ACTIVE
- * @arg @ref LL_TIM_OCMODE_PWM1
- * @arg @ref LL_TIM_OCMODE_PWM2
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_OC_SetMode(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Mode)
-{
- register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- register __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
- MODIFY_REG(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel]), Mode << SHIFT_TAB_OCxx[iChannel]);
-}
-
-/**
- * @brief Get the output compare mode of an output channel.
- * @rmtoll CCMR1 OC1M LL_TIM_OC_GetMode\n
- * CCMR1 OC2M LL_TIM_OC_GetMode\n
- * CCMR2 OC3M LL_TIM_OC_GetMode\n
- * CCMR2 OC4M LL_TIM_OC_GetMode
- * @param TIMx Timer instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_TIM_CHANNEL_CH1
- * @arg @ref LL_TIM_CHANNEL_CH2
- * @arg @ref LL_TIM_CHANNEL_CH3
- * @arg @ref LL_TIM_CHANNEL_CH4
- * @retval Returned value can be one of the following values:
- * @arg @ref LL_TIM_OCMODE_FROZEN
- * @arg @ref LL_TIM_OCMODE_ACTIVE
- * @arg @ref LL_TIM_OCMODE_INACTIVE
- * @arg @ref LL_TIM_OCMODE_TOGGLE
- * @arg @ref LL_TIM_OCMODE_FORCED_INACTIVE
- * @arg @ref LL_TIM_OCMODE_FORCED_ACTIVE
- * @arg @ref LL_TIM_OCMODE_PWM1
- * @arg @ref LL_TIM_OCMODE_PWM2
- */
-__STATIC_INLINE uint32_t LL_TIM_OC_GetMode(TIM_TypeDef *TIMx, uint32_t Channel)
-{
- register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- register const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
- return (READ_BIT(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel])) >> SHIFT_TAB_OCxx[iChannel]);
-}
-
-/**
- * @brief Set the polarity of an output channel.
- * @rmtoll CCER CC1P LL_TIM_OC_SetPolarity\n
- * CCER CC1NP LL_TIM_OC_SetPolarity\n
- * CCER CC2P LL_TIM_OC_SetPolarity\n
- * CCER CC2NP LL_TIM_OC_SetPolarity\n
- * CCER CC3P LL_TIM_OC_SetPolarity\n
- * CCER CC3NP LL_TIM_OC_SetPolarity\n
- * CCER CC4P LL_TIM_OC_SetPolarity
- * @param TIMx Timer instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_TIM_CHANNEL_CH1
- * @arg @ref LL_TIM_CHANNEL_CH1N
- * @arg @ref LL_TIM_CHANNEL_CH2
- * @arg @ref LL_TIM_CHANNEL_CH2N
- * @arg @ref LL_TIM_CHANNEL_CH3
- * @arg @ref LL_TIM_CHANNEL_CH3N
- * @arg @ref LL_TIM_CHANNEL_CH4
- * @param Polarity This parameter can be one of the following values:
- * @arg @ref LL_TIM_OCPOLARITY_HIGH
- * @arg @ref LL_TIM_OCPOLARITY_LOW
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_OC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Polarity)
-{
- register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]), Polarity << SHIFT_TAB_CCxP[iChannel]);
-}
-
-/**
- * @brief Get the polarity of an output channel.
- * @rmtoll CCER CC1P LL_TIM_OC_GetPolarity\n
- * CCER CC1NP LL_TIM_OC_GetPolarity\n
- * CCER CC2P LL_TIM_OC_GetPolarity\n
- * CCER CC2NP LL_TIM_OC_GetPolarity\n
- * CCER CC3P LL_TIM_OC_GetPolarity\n
- * CCER CC3NP LL_TIM_OC_GetPolarity\n
- * CCER CC4P LL_TIM_OC_GetPolarity
- * @param TIMx Timer instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_TIM_CHANNEL_CH1
- * @arg @ref LL_TIM_CHANNEL_CH1N
- * @arg @ref LL_TIM_CHANNEL_CH2
- * @arg @ref LL_TIM_CHANNEL_CH2N
- * @arg @ref LL_TIM_CHANNEL_CH3
- * @arg @ref LL_TIM_CHANNEL_CH3N
- * @arg @ref LL_TIM_CHANNEL_CH4
- * @retval Returned value can be one of the following values:
- * @arg @ref LL_TIM_OCPOLARITY_HIGH
- * @arg @ref LL_TIM_OCPOLARITY_LOW
- */
-__STATIC_INLINE uint32_t LL_TIM_OC_GetPolarity(TIM_TypeDef *TIMx, uint32_t Channel)
-{
- register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- return (READ_BIT(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel])) >> SHIFT_TAB_CCxP[iChannel]);
-}
-
-/**
- * @brief Set the IDLE state of an output channel
- * @note This function is significant only for the timer instances
- * supporting the break feature. Macro IS_TIM_BREAK_INSTANCE(TIMx)
- * can be used to check whether or not a timer instance provides
- * a break input.
- * @rmtoll CR2 OIS1 LL_TIM_OC_SetIdleState\n
- * CR2 OIS1N LL_TIM_OC_SetIdleState\n
- * CR2 OIS2 LL_TIM_OC_SetIdleState\n
- * CR2 OIS2N LL_TIM_OC_SetIdleState\n
- * CR2 OIS3 LL_TIM_OC_SetIdleState\n
- * CR2 OIS3N LL_TIM_OC_SetIdleState\n
- * CR2 OIS4 LL_TIM_OC_SetIdleState
- * @param TIMx Timer instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_TIM_CHANNEL_CH1
- * @arg @ref LL_TIM_CHANNEL_CH1N
- * @arg @ref LL_TIM_CHANNEL_CH2
- * @arg @ref LL_TIM_CHANNEL_CH2N
- * @arg @ref LL_TIM_CHANNEL_CH3
- * @arg @ref LL_TIM_CHANNEL_CH3N
- * @arg @ref LL_TIM_CHANNEL_CH4
- * @param IdleState This parameter can be one of the following values:
- * @arg @ref LL_TIM_OCIDLESTATE_LOW
- * @arg @ref LL_TIM_OCIDLESTATE_HIGH
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_OC_SetIdleState(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t IdleState)
-{
- register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- MODIFY_REG(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel]), IdleState << SHIFT_TAB_OISx[iChannel]);
-}
-
-/**
- * @brief Get the IDLE state of an output channel
- * @rmtoll CR2 OIS1 LL_TIM_OC_GetIdleState\n
- * CR2 OIS1N LL_TIM_OC_GetIdleState\n
- * CR2 OIS2 LL_TIM_OC_GetIdleState\n
- * CR2 OIS2N LL_TIM_OC_GetIdleState\n
- * CR2 OIS3 LL_TIM_OC_GetIdleState\n
- * CR2 OIS3N LL_TIM_OC_GetIdleState\n
- * CR2 OIS4 LL_TIM_OC_GetIdleState
- * @param TIMx Timer instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_TIM_CHANNEL_CH1
- * @arg @ref LL_TIM_CHANNEL_CH1N
- * @arg @ref LL_TIM_CHANNEL_CH2
- * @arg @ref LL_TIM_CHANNEL_CH2N
- * @arg @ref LL_TIM_CHANNEL_CH3
- * @arg @ref LL_TIM_CHANNEL_CH3N
- * @arg @ref LL_TIM_CHANNEL_CH4
- * @retval Returned value can be one of the following values:
- * @arg @ref LL_TIM_OCIDLESTATE_LOW
- * @arg @ref LL_TIM_OCIDLESTATE_HIGH
- */
-__STATIC_INLINE uint32_t LL_TIM_OC_GetIdleState(TIM_TypeDef *TIMx, uint32_t Channel)
-{
- register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- return (READ_BIT(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel])) >> SHIFT_TAB_OISx[iChannel]);
-}
-
-/**
- * @brief Enable fast mode for the output channel.
- * @note Acts only if the channel is configured in PWM1 or PWM2 mode.
- * @rmtoll CCMR1 OC1FE LL_TIM_OC_EnableFast\n
- * CCMR1 OC2FE LL_TIM_OC_EnableFast\n
- * CCMR2 OC3FE LL_TIM_OC_EnableFast\n
- * CCMR2 OC4FE LL_TIM_OC_EnableFast
- * @param TIMx Timer instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_TIM_CHANNEL_CH1
- * @arg @ref LL_TIM_CHANNEL_CH2
- * @arg @ref LL_TIM_CHANNEL_CH3
- * @arg @ref LL_TIM_CHANNEL_CH4
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_OC_EnableFast(TIM_TypeDef *TIMx, uint32_t Channel)
-{
- register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- register __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
- SET_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel]));
-
-}
-
-/**
- * @brief Disable fast mode for the output channel.
- * @rmtoll CCMR1 OC1FE LL_TIM_OC_DisableFast\n
- * CCMR1 OC2FE LL_TIM_OC_DisableFast\n
- * CCMR2 OC3FE LL_TIM_OC_DisableFast\n
- * CCMR2 OC4FE LL_TIM_OC_DisableFast
- * @param TIMx Timer instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_TIM_CHANNEL_CH1
- * @arg @ref LL_TIM_CHANNEL_CH2
- * @arg @ref LL_TIM_CHANNEL_CH3
- * @arg @ref LL_TIM_CHANNEL_CH4
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_OC_DisableFast(TIM_TypeDef *TIMx, uint32_t Channel)
-{
- register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- register __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
- CLEAR_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel]));
-
-}
-
-/**
- * @brief Indicates whether fast mode is enabled for the output channel.
- * @rmtoll CCMR1 OC1FE LL_TIM_OC_IsEnabledFast\n
- * CCMR1 OC2FE LL_TIM_OC_IsEnabledFast\n
- * CCMR2 OC3FE LL_TIM_OC_IsEnabledFast\n
- * CCMR2 OC4FE LL_TIM_OC_IsEnabledFast\n
- * @param TIMx Timer instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_TIM_CHANNEL_CH1
- * @arg @ref LL_TIM_CHANNEL_CH2
- * @arg @ref LL_TIM_CHANNEL_CH3
- * @arg @ref LL_TIM_CHANNEL_CH4
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledFast(TIM_TypeDef *TIMx, uint32_t Channel)
-{
- register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- register const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
- register uint32_t bitfield = TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel];
- return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL);
-}
-
-/**
- * @brief Enable compare register (TIMx_CCRx) preload for the output channel.
- * @rmtoll CCMR1 OC1PE LL_TIM_OC_EnablePreload\n
- * CCMR1 OC2PE LL_TIM_OC_EnablePreload\n
- * CCMR2 OC3PE LL_TIM_OC_EnablePreload\n
- * CCMR2 OC4PE LL_TIM_OC_EnablePreload
- * @param TIMx Timer instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_TIM_CHANNEL_CH1
- * @arg @ref LL_TIM_CHANNEL_CH2
- * @arg @ref LL_TIM_CHANNEL_CH3
- * @arg @ref LL_TIM_CHANNEL_CH4
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_OC_EnablePreload(TIM_TypeDef *TIMx, uint32_t Channel)
-{
- register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- register __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
- SET_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel]));
-}
-
-/**
- * @brief Disable compare register (TIMx_CCRx) preload for the output channel.
- * @rmtoll CCMR1 OC1PE LL_TIM_OC_DisablePreload\n
- * CCMR1 OC2PE LL_TIM_OC_DisablePreload\n
- * CCMR2 OC3PE LL_TIM_OC_DisablePreload\n
- * CCMR2 OC4PE LL_TIM_OC_DisablePreload
- * @param TIMx Timer instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_TIM_CHANNEL_CH1
- * @arg @ref LL_TIM_CHANNEL_CH2
- * @arg @ref LL_TIM_CHANNEL_CH3
- * @arg @ref LL_TIM_CHANNEL_CH4
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_OC_DisablePreload(TIM_TypeDef *TIMx, uint32_t Channel)
-{
- register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- register __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
- CLEAR_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel]));
-}
-
-/**
- * @brief Indicates whether compare register (TIMx_CCRx) preload is enabled for the output channel.
- * @rmtoll CCMR1 OC1PE LL_TIM_OC_IsEnabledPreload\n
- * CCMR1 OC2PE LL_TIM_OC_IsEnabledPreload\n
- * CCMR2 OC3PE LL_TIM_OC_IsEnabledPreload\n
- * CCMR2 OC4PE LL_TIM_OC_IsEnabledPreload\n
- * @param TIMx Timer instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_TIM_CHANNEL_CH1
- * @arg @ref LL_TIM_CHANNEL_CH2
- * @arg @ref LL_TIM_CHANNEL_CH3
- * @arg @ref LL_TIM_CHANNEL_CH4
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledPreload(TIM_TypeDef *TIMx, uint32_t Channel)
-{
- register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- register const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
- register uint32_t bitfield = TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel];
- return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL);
-}
-
-/**
- * @brief Enable clearing the output channel on an external event.
- * @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode.
- * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether
- * or not a timer instance can clear the OCxREF signal on an external event.
- * @rmtoll CCMR1 OC1CE LL_TIM_OC_EnableClear\n
- * CCMR1 OC2CE LL_TIM_OC_EnableClear\n
- * CCMR2 OC3CE LL_TIM_OC_EnableClear\n
- * CCMR2 OC4CE LL_TIM_OC_EnableClear
- * @param TIMx Timer instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_TIM_CHANNEL_CH1
- * @arg @ref LL_TIM_CHANNEL_CH2
- * @arg @ref LL_TIM_CHANNEL_CH3
- * @arg @ref LL_TIM_CHANNEL_CH4
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_OC_EnableClear(TIM_TypeDef *TIMx, uint32_t Channel)
-{
- register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- register __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
- SET_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel]));
-}
-
-/**
- * @brief Disable clearing the output channel on an external event.
- * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether
- * or not a timer instance can clear the OCxREF signal on an external event.
- * @rmtoll CCMR1 OC1CE LL_TIM_OC_DisableClear\n
- * CCMR1 OC2CE LL_TIM_OC_DisableClear\n
- * CCMR2 OC3CE LL_TIM_OC_DisableClear\n
- * CCMR2 OC4CE LL_TIM_OC_DisableClear
- * @param TIMx Timer instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_TIM_CHANNEL_CH1
- * @arg @ref LL_TIM_CHANNEL_CH2
- * @arg @ref LL_TIM_CHANNEL_CH3
- * @arg @ref LL_TIM_CHANNEL_CH4
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_OC_DisableClear(TIM_TypeDef *TIMx, uint32_t Channel)
-{
- register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- register __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
- CLEAR_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel]));
-}
-
-/**
- * @brief Indicates clearing the output channel on an external event is enabled for the output channel.
- * @note This function enables clearing the output channel on an external event.
- * @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode.
- * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether
- * or not a timer instance can clear the OCxREF signal on an external event.
- * @rmtoll CCMR1 OC1CE LL_TIM_OC_IsEnabledClear\n
- * CCMR1 OC2CE LL_TIM_OC_IsEnabledClear\n
- * CCMR2 OC3CE LL_TIM_OC_IsEnabledClear\n
- * CCMR2 OC4CE LL_TIM_OC_IsEnabledClear\n
- * @param TIMx Timer instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_TIM_CHANNEL_CH1
- * @arg @ref LL_TIM_CHANNEL_CH2
- * @arg @ref LL_TIM_CHANNEL_CH3
- * @arg @ref LL_TIM_CHANNEL_CH4
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledClear(TIM_TypeDef *TIMx, uint32_t Channel)
-{
- register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- register const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
- register uint32_t bitfield = TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel];
- return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL);
-}
-
-/**
- * @brief Set the dead-time delay (delay inserted between the rising edge of the OCxREF signal and the rising edge of the Ocx and OCxN signals).
- * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
- * dead-time insertion feature is supported by a timer instance.
- * @note Helper macro @ref __LL_TIM_CALC_DEADTIME can be used to calculate the DeadTime parameter
- * @rmtoll BDTR DTG LL_TIM_OC_SetDeadTime
- * @param TIMx Timer instance
- * @param DeadTime between Min_Data=0 and Max_Data=255
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_OC_SetDeadTime(TIM_TypeDef *TIMx, uint32_t DeadTime)
-{
- MODIFY_REG(TIMx->BDTR, TIM_BDTR_DTG, DeadTime);
-}
-
-/**
- * @brief Set compare value for output channel 1 (TIMx_CCR1).
- * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF.
- * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
- * whether or not a timer instance supports a 32 bits counter.
- * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not
- * output channel 1 is supported by a timer instance.
- * @rmtoll CCR1 CCR1 LL_TIM_OC_SetCompareCH1
- * @param TIMx Timer instance
- * @param CompareValue between Min_Data=0 and Max_Data=65535
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_OC_SetCompareCH1(TIM_TypeDef *TIMx, uint32_t CompareValue)
-{
- WRITE_REG(TIMx->CCR1, CompareValue);
-}
-
-/**
- * @brief Set compare value for output channel 2 (TIMx_CCR2).
- * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF.
- * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
- * whether or not a timer instance supports a 32 bits counter.
- * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not
- * output channel 2 is supported by a timer instance.
- * @rmtoll CCR2 CCR2 LL_TIM_OC_SetCompareCH2
- * @param TIMx Timer instance
- * @param CompareValue between Min_Data=0 and Max_Data=65535
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_OC_SetCompareCH2(TIM_TypeDef *TIMx, uint32_t CompareValue)
-{
- WRITE_REG(TIMx->CCR2, CompareValue);
-}
-
-/**
- * @brief Set compare value for output channel 3 (TIMx_CCR3).
- * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF.
- * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
- * whether or not a timer instance supports a 32 bits counter.
- * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not
- * output channel is supported by a timer instance.
- * @rmtoll CCR3 CCR3 LL_TIM_OC_SetCompareCH3
- * @param TIMx Timer instance
- * @param CompareValue between Min_Data=0 and Max_Data=65535
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_OC_SetCompareCH3(TIM_TypeDef *TIMx, uint32_t CompareValue)
-{
- WRITE_REG(TIMx->CCR3, CompareValue);
-}
-
-/**
- * @brief Set compare value for output channel 4 (TIMx_CCR4).
- * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF.
- * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
- * whether or not a timer instance supports a 32 bits counter.
- * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not
- * output channel 4 is supported by a timer instance.
- * @rmtoll CCR4 CCR4 LL_TIM_OC_SetCompareCH4
- * @param TIMx Timer instance
- * @param CompareValue between Min_Data=0 and Max_Data=65535
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_OC_SetCompareCH4(TIM_TypeDef *TIMx, uint32_t CompareValue)
-{
- WRITE_REG(TIMx->CCR4, CompareValue);
-}
-
-/**
- * @brief Get compare value (TIMx_CCR1) set for output channel 1.
- * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF.
- * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
- * whether or not a timer instance supports a 32 bits counter.
- * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not
- * output channel 1 is supported by a timer instance.
- * @rmtoll CCR1 CCR1 LL_TIM_OC_GetCompareCH1
- * @param TIMx Timer instance
- * @retval CompareValue (between Min_Data=0 and Max_Data=65535)
- */
-__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH1(TIM_TypeDef *TIMx)
-{
- return (uint32_t)(READ_REG(TIMx->CCR1));
-}
-
-/**
- * @brief Get compare value (TIMx_CCR2) set for output channel 2.
- * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF.
- * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
- * whether or not a timer instance supports a 32 bits counter.
- * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not
- * output channel 2 is supported by a timer instance.
- * @rmtoll CCR2 CCR2 LL_TIM_OC_GetCompareCH2
- * @param TIMx Timer instance
- * @retval CompareValue (between Min_Data=0 and Max_Data=65535)
- */
-__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH2(TIM_TypeDef *TIMx)
-{
- return (uint32_t)(READ_REG(TIMx->CCR2));
-}
-
-/**
- * @brief Get compare value (TIMx_CCR3) set for output channel 3.
- * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF.
- * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
- * whether or not a timer instance supports a 32 bits counter.
- * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not
- * output channel 3 is supported by a timer instance.
- * @rmtoll CCR3 CCR3 LL_TIM_OC_GetCompareCH3
- * @param TIMx Timer instance
- * @retval CompareValue (between Min_Data=0 and Max_Data=65535)
- */
-__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH3(TIM_TypeDef *TIMx)
-{
- return (uint32_t)(READ_REG(TIMx->CCR3));
-}
-
-/**
- * @brief Get compare value (TIMx_CCR4) set for output channel 4.
- * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF.
- * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
- * whether or not a timer instance supports a 32 bits counter.
- * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not
- * output channel 4 is supported by a timer instance.
- * @rmtoll CCR4 CCR4 LL_TIM_OC_GetCompareCH4
- * @param TIMx Timer instance
- * @retval CompareValue (between Min_Data=0 and Max_Data=65535)
- */
-__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH4(TIM_TypeDef *TIMx)
-{
- return (uint32_t)(READ_REG(TIMx->CCR4));
-}
-
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EF_Input_Channel Input channel configuration
- * @{
- */
-/**
- * @brief Configure input channel.
- * @rmtoll CCMR1 CC1S LL_TIM_IC_Config\n
- * CCMR1 IC1PSC LL_TIM_IC_Config\n
- * CCMR1 IC1F LL_TIM_IC_Config\n
- * CCMR1 CC2S LL_TIM_IC_Config\n
- * CCMR1 IC2PSC LL_TIM_IC_Config\n
- * CCMR1 IC2F LL_TIM_IC_Config\n
- * CCMR2 CC3S LL_TIM_IC_Config\n
- * CCMR2 IC3PSC LL_TIM_IC_Config\n
- * CCMR2 IC3F LL_TIM_IC_Config\n
- * CCMR2 CC4S LL_TIM_IC_Config\n
- * CCMR2 IC4PSC LL_TIM_IC_Config\n
- * CCMR2 IC4F LL_TIM_IC_Config\n
- * CCER CC1P LL_TIM_IC_Config\n
- * CCER CC1NP LL_TIM_IC_Config\n
- * CCER CC2P LL_TIM_IC_Config\n
- * CCER CC2NP LL_TIM_IC_Config\n
- * CCER CC3P LL_TIM_IC_Config\n
- * CCER CC3NP LL_TIM_IC_Config\n
- * CCER CC4P LL_TIM_IC_Config\n
- * CCER CC4NP LL_TIM_IC_Config
- * @param TIMx Timer instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_TIM_CHANNEL_CH1
- * @arg @ref LL_TIM_CHANNEL_CH2
- * @arg @ref LL_TIM_CHANNEL_CH3
- * @arg @ref LL_TIM_CHANNEL_CH4
- * @param Configuration This parameter must be a combination of all the following values:
- * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI or @ref LL_TIM_ACTIVEINPUT_INDIRECTTI or @ref LL_TIM_ACTIVEINPUT_TRC
- * @arg @ref LL_TIM_ICPSC_DIV1 or ... or @ref LL_TIM_ICPSC_DIV8
- * @arg @ref LL_TIM_IC_FILTER_FDIV1 or ... or @ref LL_TIM_IC_FILTER_FDIV32_N8
- * @arg @ref LL_TIM_IC_POLARITY_RISING or @ref LL_TIM_IC_POLARITY_FALLING or @ref LL_TIM_IC_POLARITY_BOTHEDGE
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_IC_Config(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration)
-{
- register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- register __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
- MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]),
- ((Configuration >> 16U) & (TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S)) << SHIFT_TAB_ICxx[iChannel]);
- MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]),
- (Configuration & (TIM_CCER_CC1NP | TIM_CCER_CC1P)) << SHIFT_TAB_CCxP[iChannel]);
-}
-
-/**
- * @brief Set the active input.
- * @rmtoll CCMR1 CC1S LL_TIM_IC_SetActiveInput\n
- * CCMR1 CC2S LL_TIM_IC_SetActiveInput\n
- * CCMR2 CC3S LL_TIM_IC_SetActiveInput\n
- * CCMR2 CC4S LL_TIM_IC_SetActiveInput
- * @param TIMx Timer instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_TIM_CHANNEL_CH1
- * @arg @ref LL_TIM_CHANNEL_CH2
- * @arg @ref LL_TIM_CHANNEL_CH3
- * @arg @ref LL_TIM_CHANNEL_CH4
- * @param ICActiveInput This parameter can be one of the following values:
- * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI
- * @arg @ref LL_TIM_ACTIVEINPUT_INDIRECTTI
- * @arg @ref LL_TIM_ACTIVEINPUT_TRC
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_IC_SetActiveInput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICActiveInput)
-{
- register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- register __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
- MODIFY_REG(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]), (ICActiveInput >> 16U) << SHIFT_TAB_ICxx[iChannel]);
-}
-
-/**
- * @brief Get the current active input.
- * @rmtoll CCMR1 CC1S LL_TIM_IC_GetActiveInput\n
- * CCMR1 CC2S LL_TIM_IC_GetActiveInput\n
- * CCMR2 CC3S LL_TIM_IC_GetActiveInput\n
- * CCMR2 CC4S LL_TIM_IC_GetActiveInput
- * @param TIMx Timer instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_TIM_CHANNEL_CH1
- * @arg @ref LL_TIM_CHANNEL_CH2
- * @arg @ref LL_TIM_CHANNEL_CH3
- * @arg @ref LL_TIM_CHANNEL_CH4
- * @retval Returned value can be one of the following values:
- * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI
- * @arg @ref LL_TIM_ACTIVEINPUT_INDIRECTTI
- * @arg @ref LL_TIM_ACTIVEINPUT_TRC
- */
-__STATIC_INLINE uint32_t LL_TIM_IC_GetActiveInput(TIM_TypeDef *TIMx, uint32_t Channel)
-{
- register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- register const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
- return ((READ_BIT(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U);
-}
-
-/**
- * @brief Set the prescaler of input channel.
- * @rmtoll CCMR1 IC1PSC LL_TIM_IC_SetPrescaler\n
- * CCMR1 IC2PSC LL_TIM_IC_SetPrescaler\n
- * CCMR2 IC3PSC LL_TIM_IC_SetPrescaler\n
- * CCMR2 IC4PSC LL_TIM_IC_SetPrescaler
- * @param TIMx Timer instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_TIM_CHANNEL_CH1
- * @arg @ref LL_TIM_CHANNEL_CH2
- * @arg @ref LL_TIM_CHANNEL_CH3
- * @arg @ref LL_TIM_CHANNEL_CH4
- * @param ICPrescaler This parameter can be one of the following values:
- * @arg @ref LL_TIM_ICPSC_DIV1
- * @arg @ref LL_TIM_ICPSC_DIV2
- * @arg @ref LL_TIM_ICPSC_DIV4
- * @arg @ref LL_TIM_ICPSC_DIV8
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_IC_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPrescaler)
-{
- register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- register __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
- MODIFY_REG(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel]), (ICPrescaler >> 16U) << SHIFT_TAB_ICxx[iChannel]);
-}
-
-/**
- * @brief Get the current prescaler value acting on an input channel.
- * @rmtoll CCMR1 IC1PSC LL_TIM_IC_GetPrescaler\n
- * CCMR1 IC2PSC LL_TIM_IC_GetPrescaler\n
- * CCMR2 IC3PSC LL_TIM_IC_GetPrescaler\n
- * CCMR2 IC4PSC LL_TIM_IC_GetPrescaler
- * @param TIMx Timer instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_TIM_CHANNEL_CH1
- * @arg @ref LL_TIM_CHANNEL_CH2
- * @arg @ref LL_TIM_CHANNEL_CH3
- * @arg @ref LL_TIM_CHANNEL_CH4
- * @retval Returned value can be one of the following values:
- * @arg @ref LL_TIM_ICPSC_DIV1
- * @arg @ref LL_TIM_ICPSC_DIV2
- * @arg @ref LL_TIM_ICPSC_DIV4
- * @arg @ref LL_TIM_ICPSC_DIV8
- */
-__STATIC_INLINE uint32_t LL_TIM_IC_GetPrescaler(TIM_TypeDef *TIMx, uint32_t Channel)
-{
- register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- register const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
- return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U);
-}
-
-/**
- * @brief Set the input filter duration.
- * @rmtoll CCMR1 IC1F LL_TIM_IC_SetFilter\n
- * CCMR1 IC2F LL_TIM_IC_SetFilter\n
- * CCMR2 IC3F LL_TIM_IC_SetFilter\n
- * CCMR2 IC4F LL_TIM_IC_SetFilter
- * @param TIMx Timer instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_TIM_CHANNEL_CH1
- * @arg @ref LL_TIM_CHANNEL_CH2
- * @arg @ref LL_TIM_CHANNEL_CH3
- * @arg @ref LL_TIM_CHANNEL_CH4
- * @param ICFilter This parameter can be one of the following values:
- * @arg @ref LL_TIM_IC_FILTER_FDIV1
- * @arg @ref LL_TIM_IC_FILTER_FDIV1_N2
- * @arg @ref LL_TIM_IC_FILTER_FDIV1_N4
- * @arg @ref LL_TIM_IC_FILTER_FDIV1_N8
- * @arg @ref LL_TIM_IC_FILTER_FDIV2_N6
- * @arg @ref LL_TIM_IC_FILTER_FDIV2_N8
- * @arg @ref LL_TIM_IC_FILTER_FDIV4_N6
- * @arg @ref LL_TIM_IC_FILTER_FDIV4_N8
- * @arg @ref LL_TIM_IC_FILTER_FDIV8_N6
- * @arg @ref LL_TIM_IC_FILTER_FDIV8_N8
- * @arg @ref LL_TIM_IC_FILTER_FDIV16_N5
- * @arg @ref LL_TIM_IC_FILTER_FDIV16_N6
- * @arg @ref LL_TIM_IC_FILTER_FDIV16_N8
- * @arg @ref LL_TIM_IC_FILTER_FDIV32_N5
- * @arg @ref LL_TIM_IC_FILTER_FDIV32_N6
- * @arg @ref LL_TIM_IC_FILTER_FDIV32_N8
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_IC_SetFilter(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICFilter)
-{
- register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- register __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
- MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel]), (ICFilter >> 16U) << SHIFT_TAB_ICxx[iChannel]);
-}
-
-/**
- * @brief Get the input filter duration.
- * @rmtoll CCMR1 IC1F LL_TIM_IC_GetFilter\n
- * CCMR1 IC2F LL_TIM_IC_GetFilter\n
- * CCMR2 IC3F LL_TIM_IC_GetFilter\n
- * CCMR2 IC4F LL_TIM_IC_GetFilter
- * @param TIMx Timer instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_TIM_CHANNEL_CH1
- * @arg @ref LL_TIM_CHANNEL_CH2
- * @arg @ref LL_TIM_CHANNEL_CH3
- * @arg @ref LL_TIM_CHANNEL_CH4
- * @retval Returned value can be one of the following values:
- * @arg @ref LL_TIM_IC_FILTER_FDIV1
- * @arg @ref LL_TIM_IC_FILTER_FDIV1_N2
- * @arg @ref LL_TIM_IC_FILTER_FDIV1_N4
- * @arg @ref LL_TIM_IC_FILTER_FDIV1_N8
- * @arg @ref LL_TIM_IC_FILTER_FDIV2_N6
- * @arg @ref LL_TIM_IC_FILTER_FDIV2_N8
- * @arg @ref LL_TIM_IC_FILTER_FDIV4_N6
- * @arg @ref LL_TIM_IC_FILTER_FDIV4_N8
- * @arg @ref LL_TIM_IC_FILTER_FDIV8_N6
- * @arg @ref LL_TIM_IC_FILTER_FDIV8_N8
- * @arg @ref LL_TIM_IC_FILTER_FDIV16_N5
- * @arg @ref LL_TIM_IC_FILTER_FDIV16_N6
- * @arg @ref LL_TIM_IC_FILTER_FDIV16_N8
- * @arg @ref LL_TIM_IC_FILTER_FDIV32_N5
- * @arg @ref LL_TIM_IC_FILTER_FDIV32_N6
- * @arg @ref LL_TIM_IC_FILTER_FDIV32_N8
- */
-__STATIC_INLINE uint32_t LL_TIM_IC_GetFilter(TIM_TypeDef *TIMx, uint32_t Channel)
-{
- register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- register const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
- return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U);
-}
-
-/**
- * @brief Set the input channel polarity.
- * @rmtoll CCER CC1P LL_TIM_IC_SetPolarity\n
- * CCER CC1NP LL_TIM_IC_SetPolarity\n
- * CCER CC2P LL_TIM_IC_SetPolarity\n
- * CCER CC2NP LL_TIM_IC_SetPolarity\n
- * CCER CC3P LL_TIM_IC_SetPolarity\n
- * CCER CC3NP LL_TIM_IC_SetPolarity\n
- * CCER CC4P LL_TIM_IC_SetPolarity\n
- * CCER CC4NP LL_TIM_IC_SetPolarity
- * @param TIMx Timer instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_TIM_CHANNEL_CH1
- * @arg @ref LL_TIM_CHANNEL_CH2
- * @arg @ref LL_TIM_CHANNEL_CH3
- * @arg @ref LL_TIM_CHANNEL_CH4
- * @param ICPolarity This parameter can be one of the following values:
- * @arg @ref LL_TIM_IC_POLARITY_RISING
- * @arg @ref LL_TIM_IC_POLARITY_FALLING
- * @arg @ref LL_TIM_IC_POLARITY_BOTHEDGE
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_IC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPolarity)
-{
- register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]),
- ICPolarity << SHIFT_TAB_CCxP[iChannel]);
-}
-
-/**
- * @brief Get the current input channel polarity.
- * @rmtoll CCER CC1P LL_TIM_IC_GetPolarity\n
- * CCER CC1NP LL_TIM_IC_GetPolarity\n
- * CCER CC2P LL_TIM_IC_GetPolarity\n
- * CCER CC2NP LL_TIM_IC_GetPolarity\n
- * CCER CC3P LL_TIM_IC_GetPolarity\n
- * CCER CC3NP LL_TIM_IC_GetPolarity\n
- * CCER CC4P LL_TIM_IC_GetPolarity\n
- * CCER CC4NP LL_TIM_IC_GetPolarity
- * @param TIMx Timer instance
- * @param Channel This parameter can be one of the following values:
- * @arg @ref LL_TIM_CHANNEL_CH1
- * @arg @ref LL_TIM_CHANNEL_CH2
- * @arg @ref LL_TIM_CHANNEL_CH3
- * @arg @ref LL_TIM_CHANNEL_CH4
- * @retval Returned value can be one of the following values:
- * @arg @ref LL_TIM_IC_POLARITY_RISING
- * @arg @ref LL_TIM_IC_POLARITY_FALLING
- * @arg @ref LL_TIM_IC_POLARITY_BOTHEDGE
- */
-__STATIC_INLINE uint32_t LL_TIM_IC_GetPolarity(TIM_TypeDef *TIMx, uint32_t Channel)
-{
- register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- return (READ_BIT(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel])) >>
- SHIFT_TAB_CCxP[iChannel]);
-}
-
-/**
- * @brief Connect the TIMx_CH1, CH2 and CH3 pins to the TI1 input (XOR combination).
- * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not
- * a timer instance provides an XOR input.
- * @rmtoll CR2 TI1S LL_TIM_IC_EnableXORCombination
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_IC_EnableXORCombination(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->CR2, TIM_CR2_TI1S);
-}
-
-/**
- * @brief Disconnect the TIMx_CH1, CH2 and CH3 pins from the TI1 input.
- * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not
- * a timer instance provides an XOR input.
- * @rmtoll CR2 TI1S LL_TIM_IC_DisableXORCombination
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_IC_DisableXORCombination(TIM_TypeDef *TIMx)
-{
- CLEAR_BIT(TIMx->CR2, TIM_CR2_TI1S);
-}
-
-/**
- * @brief Indicates whether the TIMx_CH1, CH2 and CH3 pins are connectected to the TI1 input.
- * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not
- * a timer instance provides an XOR input.
- * @rmtoll CR2 TI1S LL_TIM_IC_IsEnabledXORCombination
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IC_IsEnabledXORCombination(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->CR2, TIM_CR2_TI1S) == (TIM_CR2_TI1S)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Get captured value for input channel 1.
- * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF.
- * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
- * whether or not a timer instance supports a 32 bits counter.
- * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not
- * input channel 1 is supported by a timer instance.
- * @rmtoll CCR1 CCR1 LL_TIM_IC_GetCaptureCH1
- * @param TIMx Timer instance
- * @retval CapturedValue (between Min_Data=0 and Max_Data=65535)
- */
-__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH1(TIM_TypeDef *TIMx)
-{
- return (uint32_t)(READ_REG(TIMx->CCR1));
-}
-
-/**
- * @brief Get captured value for input channel 2.
- * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF.
- * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
- * whether or not a timer instance supports a 32 bits counter.
- * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not
- * input channel 2 is supported by a timer instance.
- * @rmtoll CCR2 CCR2 LL_TIM_IC_GetCaptureCH2
- * @param TIMx Timer instance
- * @retval CapturedValue (between Min_Data=0 and Max_Data=65535)
- */
-__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH2(TIM_TypeDef *TIMx)
-{
- return (uint32_t)(READ_REG(TIMx->CCR2));
-}
-
-/**
- * @brief Get captured value for input channel 3.
- * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF.
- * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
- * whether or not a timer instance supports a 32 bits counter.
- * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not
- * input channel 3 is supported by a timer instance.
- * @rmtoll CCR3 CCR3 LL_TIM_IC_GetCaptureCH3
- * @param TIMx Timer instance
- * @retval CapturedValue (between Min_Data=0 and Max_Data=65535)
- */
-__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH3(TIM_TypeDef *TIMx)
-{
- return (uint32_t)(READ_REG(TIMx->CCR3));
-}
-
-/**
- * @brief Get captured value for input channel 4.
- * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF.
- * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
- * whether or not a timer instance supports a 32 bits counter.
- * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not
- * input channel 4 is supported by a timer instance.
- * @rmtoll CCR4 CCR4 LL_TIM_IC_GetCaptureCH4
- * @param TIMx Timer instance
- * @retval CapturedValue (between Min_Data=0 and Max_Data=65535)
- */
-__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH4(TIM_TypeDef *TIMx)
-{
- return (uint32_t)(READ_REG(TIMx->CCR4));
-}
-
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EF_Clock_Selection Counter clock selection
- * @{
- */
-/**
- * @brief Enable external clock mode 2.
- * @note When external clock mode 2 is enabled the counter is clocked by any active edge on the ETRF signal.
- * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check
- * whether or not a timer instance supports external clock mode2.
- * @rmtoll SMCR ECE LL_TIM_EnableExternalClock
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_EnableExternalClock(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->SMCR, TIM_SMCR_ECE);
-}
-
-/**
- * @brief Disable external clock mode 2.
- * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check
- * whether or not a timer instance supports external clock mode2.
- * @rmtoll SMCR ECE LL_TIM_DisableExternalClock
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_DisableExternalClock(TIM_TypeDef *TIMx)
-{
- CLEAR_BIT(TIMx->SMCR, TIM_SMCR_ECE);
-}
-
-/**
- * @brief Indicate whether external clock mode 2 is enabled.
- * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check
- * whether or not a timer instance supports external clock mode2.
- * @rmtoll SMCR ECE LL_TIM_IsEnabledExternalClock
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsEnabledExternalClock(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->SMCR, TIM_SMCR_ECE) == (TIM_SMCR_ECE)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Set the clock source of the counter clock.
- * @note when selected clock source is external clock mode 1, the timer input
- * the external clock is applied is selected by calling the @ref LL_TIM_SetTriggerInput()
- * function. This timer input must be configured by calling
- * the @ref LL_TIM_IC_Config() function.
- * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(TIMx) can be used to check
- * whether or not a timer instance supports external clock mode1.
- * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check
- * whether or not a timer instance supports external clock mode2.
- * @rmtoll SMCR SMS LL_TIM_SetClockSource\n
- * SMCR ECE LL_TIM_SetClockSource
- * @param TIMx Timer instance
- * @param ClockSource This parameter can be one of the following values:
- * @arg @ref LL_TIM_CLOCKSOURCE_INTERNAL
- * @arg @ref LL_TIM_CLOCKSOURCE_EXT_MODE1
- * @arg @ref LL_TIM_CLOCKSOURCE_EXT_MODE2
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_SetClockSource(TIM_TypeDef *TIMx, uint32_t ClockSource)
-{
- MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS | TIM_SMCR_ECE, ClockSource);
-}
-
-/**
- * @brief Set the encoder interface mode.
- * @note Macro IS_TIM_ENCODER_INTERFACE_INSTANCE(TIMx) can be used to check
- * whether or not a timer instance supports the encoder mode.
- * @rmtoll SMCR SMS LL_TIM_SetEncoderMode
- * @param TIMx Timer instance
- * @param EncoderMode This parameter can be one of the following values:
- * @arg @ref LL_TIM_ENCODERMODE_X2_TI1
- * @arg @ref LL_TIM_ENCODERMODE_X2_TI2
- * @arg @ref LL_TIM_ENCODERMODE_X4_TI12
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_SetEncoderMode(TIM_TypeDef *TIMx, uint32_t EncoderMode)
-{
- MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS, EncoderMode);
-}
-
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EF_Timer_Synchronization Timer synchronisation configuration
- * @{
- */
-/**
- * @brief Set the trigger output (TRGO) used for timer synchronization .
- * @note Macro IS_TIM_MASTER_INSTANCE(TIMx) can be used to check
- * whether or not a timer instance can operate as a master timer.
- * @rmtoll CR2 MMS LL_TIM_SetTriggerOutput
- * @param TIMx Timer instance
- * @param TimerSynchronization This parameter can be one of the following values:
- * @arg @ref LL_TIM_TRGO_RESET
- * @arg @ref LL_TIM_TRGO_ENABLE
- * @arg @ref LL_TIM_TRGO_UPDATE
- * @arg @ref LL_TIM_TRGO_CC1IF
- * @arg @ref LL_TIM_TRGO_OC1REF
- * @arg @ref LL_TIM_TRGO_OC2REF
- * @arg @ref LL_TIM_TRGO_OC3REF
- * @arg @ref LL_TIM_TRGO_OC4REF
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_SetTriggerOutput(TIM_TypeDef *TIMx, uint32_t TimerSynchronization)
-{
- MODIFY_REG(TIMx->CR2, TIM_CR2_MMS, TimerSynchronization);
-}
-
-/**
- * @brief Set the synchronization mode of a slave timer.
- * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not
- * a timer instance can operate as a slave timer.
- * @rmtoll SMCR SMS LL_TIM_SetSlaveMode
- * @param TIMx Timer instance
- * @param SlaveMode This parameter can be one of the following values:
- * @arg @ref LL_TIM_SLAVEMODE_DISABLED
- * @arg @ref LL_TIM_SLAVEMODE_RESET
- * @arg @ref LL_TIM_SLAVEMODE_GATED
- * @arg @ref LL_TIM_SLAVEMODE_TRIGGER
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_SetSlaveMode(TIM_TypeDef *TIMx, uint32_t SlaveMode)
-{
- MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS, SlaveMode);
-}
-
-/**
- * @brief Set the selects the trigger input to be used to synchronize the counter.
- * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not
- * a timer instance can operate as a slave timer.
- * @rmtoll SMCR TS LL_TIM_SetTriggerInput
- * @param TIMx Timer instance
- * @param TriggerInput This parameter can be one of the following values:
- * @arg @ref LL_TIM_TS_ITR0
- * @arg @ref LL_TIM_TS_ITR1
- * @arg @ref LL_TIM_TS_ITR2
- * @arg @ref LL_TIM_TS_ITR3
- * @arg @ref LL_TIM_TS_TI1F_ED
- * @arg @ref LL_TIM_TS_TI1FP1
- * @arg @ref LL_TIM_TS_TI2FP2
- * @arg @ref LL_TIM_TS_ETRF
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_SetTriggerInput(TIM_TypeDef *TIMx, uint32_t TriggerInput)
-{
- MODIFY_REG(TIMx->SMCR, TIM_SMCR_TS, TriggerInput);
-}
-
-/**
- * @brief Enable the Master/Slave mode.
- * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not
- * a timer instance can operate as a slave timer.
- * @rmtoll SMCR MSM LL_TIM_EnableMasterSlaveMode
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_EnableMasterSlaveMode(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->SMCR, TIM_SMCR_MSM);
-}
-
-/**
- * @brief Disable the Master/Slave mode.
- * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not
- * a timer instance can operate as a slave timer.
- * @rmtoll SMCR MSM LL_TIM_DisableMasterSlaveMode
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_DisableMasterSlaveMode(TIM_TypeDef *TIMx)
-{
- CLEAR_BIT(TIMx->SMCR, TIM_SMCR_MSM);
-}
-
-/**
- * @brief Indicates whether the Master/Slave mode is enabled.
- * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not
- * a timer instance can operate as a slave timer.
- * @rmtoll SMCR MSM LL_TIM_IsEnabledMasterSlaveMode
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsEnabledMasterSlaveMode(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->SMCR, TIM_SMCR_MSM) == (TIM_SMCR_MSM)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Configure the external trigger (ETR) input.
- * @note Macro IS_TIM_ETR_INSTANCE(TIMx) can be used to check whether or not
- * a timer instance provides an external trigger input.
- * @rmtoll SMCR ETP LL_TIM_ConfigETR\n
- * SMCR ETPS LL_TIM_ConfigETR\n
- * SMCR ETF LL_TIM_ConfigETR
- * @param TIMx Timer instance
- * @param ETRPolarity This parameter can be one of the following values:
- * @arg @ref LL_TIM_ETR_POLARITY_NONINVERTED
- * @arg @ref LL_TIM_ETR_POLARITY_INVERTED
- * @param ETRPrescaler This parameter can be one of the following values:
- * @arg @ref LL_TIM_ETR_PRESCALER_DIV1
- * @arg @ref LL_TIM_ETR_PRESCALER_DIV2
- * @arg @ref LL_TIM_ETR_PRESCALER_DIV4
- * @arg @ref LL_TIM_ETR_PRESCALER_DIV8
- * @param ETRFilter This parameter can be one of the following values:
- * @arg @ref LL_TIM_ETR_FILTER_FDIV1
- * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N2
- * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N4
- * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N8
- * @arg @ref LL_TIM_ETR_FILTER_FDIV2_N6
- * @arg @ref LL_TIM_ETR_FILTER_FDIV2_N8
- * @arg @ref LL_TIM_ETR_FILTER_FDIV4_N6
- * @arg @ref LL_TIM_ETR_FILTER_FDIV4_N8
- * @arg @ref LL_TIM_ETR_FILTER_FDIV8_N6
- * @arg @ref LL_TIM_ETR_FILTER_FDIV8_N8
- * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N5
- * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N6
- * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N8
- * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N5
- * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N6
- * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N8
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_ConfigETR(TIM_TypeDef *TIMx, uint32_t ETRPolarity, uint32_t ETRPrescaler,
- uint32_t ETRFilter)
-{
- MODIFY_REG(TIMx->SMCR, TIM_SMCR_ETP | TIM_SMCR_ETPS | TIM_SMCR_ETF, ETRPolarity | ETRPrescaler | ETRFilter);
-}
-
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EF_Break_Function Break function configuration
- * @{
- */
-/**
- * @brief Enable the break function.
- * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
- * a timer instance provides a break input.
- * @rmtoll BDTR BKE LL_TIM_EnableBRK
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_EnableBRK(TIM_TypeDef *TIMx)
-{
- __IO uint32_t tmpreg;
- SET_BIT(TIMx->BDTR, TIM_BDTR_BKE);
- /* Note: Any write operation to this bit takes a delay of 1 APB clock cycle to become effective. */
- tmpreg = READ_REG(TIMx->BDTR);
- (void)(tmpreg);
-}
-
-/**
- * @brief Disable the break function.
- * @rmtoll BDTR BKE LL_TIM_DisableBRK
- * @param TIMx Timer instance
- * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
- * a timer instance provides a break input.
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_DisableBRK(TIM_TypeDef *TIMx)
-{
- __IO uint32_t tmpreg;
- CLEAR_BIT(TIMx->BDTR, TIM_BDTR_BKE);
- /* Note: Any write operation to this bit takes a delay of 1 APB clock cycle to become effective. */
- tmpreg = READ_REG(TIMx->BDTR);
- (void)(tmpreg);
-}
-
-/**
- * @brief Configure the break input.
- * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
- * a timer instance provides a break input.
- * @rmtoll BDTR BKP LL_TIM_ConfigBRK
- * @param TIMx Timer instance
- * @param BreakPolarity This parameter can be one of the following values:
- * @arg @ref LL_TIM_BREAK_POLARITY_LOW
- * @arg @ref LL_TIM_BREAK_POLARITY_HIGH
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_ConfigBRK(TIM_TypeDef *TIMx, uint32_t BreakPolarity)
-{
- __IO uint32_t tmpreg;
- MODIFY_REG(TIMx->BDTR, TIM_BDTR_BKP, BreakPolarity);
- /* Note: Any write operation to BKP bit takes a delay of 1 APB clock cycle to become effective. */
- tmpreg = READ_REG(TIMx->BDTR);
- (void)(tmpreg);
-}
-
-/**
- * @brief Select the outputs off state (enabled v.s. disabled) in Idle and Run modes.
- * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
- * a timer instance provides a break input.
- * @rmtoll BDTR OSSI LL_TIM_SetOffStates\n
- * BDTR OSSR LL_TIM_SetOffStates
- * @param TIMx Timer instance
- * @param OffStateIdle This parameter can be one of the following values:
- * @arg @ref LL_TIM_OSSI_DISABLE
- * @arg @ref LL_TIM_OSSI_ENABLE
- * @param OffStateRun This parameter can be one of the following values:
- * @arg @ref LL_TIM_OSSR_DISABLE
- * @arg @ref LL_TIM_OSSR_ENABLE
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_SetOffStates(TIM_TypeDef *TIMx, uint32_t OffStateIdle, uint32_t OffStateRun)
-{
- MODIFY_REG(TIMx->BDTR, TIM_BDTR_OSSI | TIM_BDTR_OSSR, OffStateIdle | OffStateRun);
-}
-
-/**
- * @brief Enable automatic output (MOE can be set by software or automatically when a break input is active).
- * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
- * a timer instance provides a break input.
- * @rmtoll BDTR AOE LL_TIM_EnableAutomaticOutput
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_EnableAutomaticOutput(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->BDTR, TIM_BDTR_AOE);
-}
-
-/**
- * @brief Disable automatic output (MOE can be set only by software).
- * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
- * a timer instance provides a break input.
- * @rmtoll BDTR AOE LL_TIM_DisableAutomaticOutput
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_DisableAutomaticOutput(TIM_TypeDef *TIMx)
-{
- CLEAR_BIT(TIMx->BDTR, TIM_BDTR_AOE);
-}
-
-/**
- * @brief Indicate whether automatic output is enabled.
- * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
- * a timer instance provides a break input.
- * @rmtoll BDTR AOE LL_TIM_IsEnabledAutomaticOutput
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsEnabledAutomaticOutput(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->BDTR, TIM_BDTR_AOE) == (TIM_BDTR_AOE)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Enable the outputs (set the MOE bit in TIMx_BDTR register).
- * @note The MOE bit in TIMx_BDTR register allows to enable /disable the outputs by
- * software and is reset in case of break or break2 event
- * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
- * a timer instance provides a break input.
- * @rmtoll BDTR MOE LL_TIM_EnableAllOutputs
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_EnableAllOutputs(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->BDTR, TIM_BDTR_MOE);
-}
-
-/**
- * @brief Disable the outputs (reset the MOE bit in TIMx_BDTR register).
- * @note The MOE bit in TIMx_BDTR register allows to enable /disable the outputs by
- * software and is reset in case of break or break2 event.
- * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
- * a timer instance provides a break input.
- * @rmtoll BDTR MOE LL_TIM_DisableAllOutputs
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_DisableAllOutputs(TIM_TypeDef *TIMx)
-{
- CLEAR_BIT(TIMx->BDTR, TIM_BDTR_MOE);
-}
-
-/**
- * @brief Indicates whether outputs are enabled.
- * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
- * a timer instance provides a break input.
- * @rmtoll BDTR MOE LL_TIM_IsEnabledAllOutputs
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsEnabledAllOutputs(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->BDTR, TIM_BDTR_MOE) == (TIM_BDTR_MOE)) ? 1UL : 0UL);
-}
-
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EF_DMA_Burst_Mode DMA burst mode configuration
- * @{
- */
-/**
- * @brief Configures the timer DMA burst feature.
- * @note Macro IS_TIM_DMABURST_INSTANCE(TIMx) can be used to check whether or
- * not a timer instance supports the DMA burst mode.
- * @rmtoll DCR DBL LL_TIM_ConfigDMABurst\n
- * DCR DBA LL_TIM_ConfigDMABurst
- * @param TIMx Timer instance
- * @param DMABurstBaseAddress This parameter can be one of the following values:
- * @arg @ref LL_TIM_DMABURST_BASEADDR_CR1
- * @arg @ref LL_TIM_DMABURST_BASEADDR_CR2
- * @arg @ref LL_TIM_DMABURST_BASEADDR_SMCR
- * @arg @ref LL_TIM_DMABURST_BASEADDR_DIER
- * @arg @ref LL_TIM_DMABURST_BASEADDR_SR
- * @arg @ref LL_TIM_DMABURST_BASEADDR_EGR
- * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR1
- * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR2
- * @arg @ref LL_TIM_DMABURST_BASEADDR_CCER
- * @arg @ref LL_TIM_DMABURST_BASEADDR_CNT
- * @arg @ref LL_TIM_DMABURST_BASEADDR_PSC
- * @arg @ref LL_TIM_DMABURST_BASEADDR_ARR
- * @arg @ref LL_TIM_DMABURST_BASEADDR_RCR
- * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR1
- * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR2
- * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR3
- * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR4
- * @arg @ref LL_TIM_DMABURST_BASEADDR_BDTR
- * @param DMABurstLength This parameter can be one of the following values:
- * @arg @ref LL_TIM_DMABURST_LENGTH_1TRANSFER
- * @arg @ref LL_TIM_DMABURST_LENGTH_2TRANSFERS
- * @arg @ref LL_TIM_DMABURST_LENGTH_3TRANSFERS
- * @arg @ref LL_TIM_DMABURST_LENGTH_4TRANSFERS
- * @arg @ref LL_TIM_DMABURST_LENGTH_5TRANSFERS
- * @arg @ref LL_TIM_DMABURST_LENGTH_6TRANSFERS
- * @arg @ref LL_TIM_DMABURST_LENGTH_7TRANSFERS
- * @arg @ref LL_TIM_DMABURST_LENGTH_8TRANSFERS
- * @arg @ref LL_TIM_DMABURST_LENGTH_9TRANSFERS
- * @arg @ref LL_TIM_DMABURST_LENGTH_10TRANSFERS
- * @arg @ref LL_TIM_DMABURST_LENGTH_11TRANSFERS
- * @arg @ref LL_TIM_DMABURST_LENGTH_12TRANSFERS
- * @arg @ref LL_TIM_DMABURST_LENGTH_13TRANSFERS
- * @arg @ref LL_TIM_DMABURST_LENGTH_14TRANSFERS
- * @arg @ref LL_TIM_DMABURST_LENGTH_15TRANSFERS
- * @arg @ref LL_TIM_DMABURST_LENGTH_16TRANSFERS
- * @arg @ref LL_TIM_DMABURST_LENGTH_17TRANSFERS
- * @arg @ref LL_TIM_DMABURST_LENGTH_18TRANSFERS
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_ConfigDMABurst(TIM_TypeDef *TIMx, uint32_t DMABurstBaseAddress, uint32_t DMABurstLength)
-{
- MODIFY_REG(TIMx->DCR, (TIM_DCR_DBL | TIM_DCR_DBA), (DMABurstBaseAddress | DMABurstLength));
-}
-
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EF_Timer_Inputs_Remapping Timer input remapping
- * @{
- */
-/**
- * @brief Remap TIM inputs (input channel, internal/external triggers).
- * @note Macro IS_TIM_REMAP_INSTANCE(TIMx) can be used to check whether or not
- * a some timer inputs can be remapped.
- * @rmtoll TIM14_OR TI1_RMP LL_TIM_SetRemap
- * @param TIMx Timer instance
- * @param Remap This parameter can be one of the following values:
- * @arg @ref LL_TIM_TIM14_TI1_RMP_GPIO
- * @arg @ref LL_TIM_TIM14_TI1_RMP_RTC_CLK
- * @arg @ref LL_TIM_TIM14_TI1_RMP_HSE
- * @arg @ref LL_TIM_TIM14_TI1_RMP_MCO
- *
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_SetRemap(TIM_TypeDef *TIMx, uint32_t Remap)
-{
- MODIFY_REG(TIMx->OR, (Remap >> TIMx_OR_RMP_SHIFT), (Remap & TIMx_OR_RMP_MASK));
-}
-
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EF_OCREF_Clear OCREF_Clear_Management
- * @{
- */
-/**
- * @brief Set the OCREF clear input source
- * @note The OCxREF signal of a given channel can be cleared when a high level is applied on the OCREF_CLR_INPUT
- * @note This function can only be used in Output compare and PWM modes.
- * @rmtoll SMCR OCCS LL_TIM_SetOCRefClearInputSource
- * @param TIMx Timer instance
- * @param OCRefClearInputSource This parameter can be one of the following values:
- * @arg @ref LL_TIM_OCREF_CLR_INT_OCREF_CLR
- * @arg @ref LL_TIM_OCREF_CLR_INT_ETR
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_SetOCRefClearInputSource(TIM_TypeDef *TIMx, uint32_t OCRefClearInputSource)
-{
- MODIFY_REG(TIMx->SMCR, TIM_SMCR_OCCS, OCRefClearInputSource);
-}
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EF_FLAG_Management FLAG-Management
- * @{
- */
-/**
- * @brief Clear the update interrupt flag (UIF).
- * @rmtoll SR UIF LL_TIM_ClearFlag_UPDATE
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_ClearFlag_UPDATE(TIM_TypeDef *TIMx)
-{
- WRITE_REG(TIMx->SR, ~(TIM_SR_UIF));
-}
-
-/**
- * @brief Indicate whether update interrupt flag (UIF) is set (update interrupt is pending).
- * @rmtoll SR UIF LL_TIM_IsActiveFlag_UPDATE
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_UPDATE(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->SR, TIM_SR_UIF) == (TIM_SR_UIF)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Clear the Capture/Compare 1 interrupt flag (CC1F).
- * @rmtoll SR CC1IF LL_TIM_ClearFlag_CC1
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_ClearFlag_CC1(TIM_TypeDef *TIMx)
-{
- WRITE_REG(TIMx->SR, ~(TIM_SR_CC1IF));
-}
-
-/**
- * @brief Indicate whether Capture/Compare 1 interrupt flag (CC1F) is set (Capture/Compare 1 interrupt is pending).
- * @rmtoll SR CC1IF LL_TIM_IsActiveFlag_CC1
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC1(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->SR, TIM_SR_CC1IF) == (TIM_SR_CC1IF)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Clear the Capture/Compare 2 interrupt flag (CC2F).
- * @rmtoll SR CC2IF LL_TIM_ClearFlag_CC2
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_ClearFlag_CC2(TIM_TypeDef *TIMx)
-{
- WRITE_REG(TIMx->SR, ~(TIM_SR_CC2IF));
-}
-
-/**
- * @brief Indicate whether Capture/Compare 2 interrupt flag (CC2F) is set (Capture/Compare 2 interrupt is pending).
- * @rmtoll SR CC2IF LL_TIM_IsActiveFlag_CC2
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC2(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->SR, TIM_SR_CC2IF) == (TIM_SR_CC2IF)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Clear the Capture/Compare 3 interrupt flag (CC3F).
- * @rmtoll SR CC3IF LL_TIM_ClearFlag_CC3
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_ClearFlag_CC3(TIM_TypeDef *TIMx)
-{
- WRITE_REG(TIMx->SR, ~(TIM_SR_CC3IF));
-}
-
-/**
- * @brief Indicate whether Capture/Compare 3 interrupt flag (CC3F) is set (Capture/Compare 3 interrupt is pending).
- * @rmtoll SR CC3IF LL_TIM_IsActiveFlag_CC3
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC3(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->SR, TIM_SR_CC3IF) == (TIM_SR_CC3IF)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Clear the Capture/Compare 4 interrupt flag (CC4F).
- * @rmtoll SR CC4IF LL_TIM_ClearFlag_CC4
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_ClearFlag_CC4(TIM_TypeDef *TIMx)
-{
- WRITE_REG(TIMx->SR, ~(TIM_SR_CC4IF));
-}
-
-/**
- * @brief Indicate whether Capture/Compare 4 interrupt flag (CC4F) is set (Capture/Compare 4 interrupt is pending).
- * @rmtoll SR CC4IF LL_TIM_IsActiveFlag_CC4
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC4(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->SR, TIM_SR_CC4IF) == (TIM_SR_CC4IF)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Clear the commutation interrupt flag (COMIF).
- * @rmtoll SR COMIF LL_TIM_ClearFlag_COM
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_ClearFlag_COM(TIM_TypeDef *TIMx)
-{
- WRITE_REG(TIMx->SR, ~(TIM_SR_COMIF));
-}
-
-/**
- * @brief Indicate whether commutation interrupt flag (COMIF) is set (commutation interrupt is pending).
- * @rmtoll SR COMIF LL_TIM_IsActiveFlag_COM
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_COM(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->SR, TIM_SR_COMIF) == (TIM_SR_COMIF)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Clear the trigger interrupt flag (TIF).
- * @rmtoll SR TIF LL_TIM_ClearFlag_TRIG
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_ClearFlag_TRIG(TIM_TypeDef *TIMx)
-{
- WRITE_REG(TIMx->SR, ~(TIM_SR_TIF));
-}
-
-/**
- * @brief Indicate whether trigger interrupt flag (TIF) is set (trigger interrupt is pending).
- * @rmtoll SR TIF LL_TIM_IsActiveFlag_TRIG
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_TRIG(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->SR, TIM_SR_TIF) == (TIM_SR_TIF)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Clear the break interrupt flag (BIF).
- * @rmtoll SR BIF LL_TIM_ClearFlag_BRK
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_ClearFlag_BRK(TIM_TypeDef *TIMx)
-{
- WRITE_REG(TIMx->SR, ~(TIM_SR_BIF));
-}
-
-/**
- * @brief Indicate whether break interrupt flag (BIF) is set (break interrupt is pending).
- * @rmtoll SR BIF LL_TIM_IsActiveFlag_BRK
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_BRK(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->SR, TIM_SR_BIF) == (TIM_SR_BIF)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Clear the Capture/Compare 1 over-capture interrupt flag (CC1OF).
- * @rmtoll SR CC1OF LL_TIM_ClearFlag_CC1OVR
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_ClearFlag_CC1OVR(TIM_TypeDef *TIMx)
-{
- WRITE_REG(TIMx->SR, ~(TIM_SR_CC1OF));
-}
-
-/**
- * @brief Indicate whether Capture/Compare 1 over-capture interrupt flag (CC1OF) is set (Capture/Compare 1 interrupt is pending).
- * @rmtoll SR CC1OF LL_TIM_IsActiveFlag_CC1OVR
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC1OVR(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->SR, TIM_SR_CC1OF) == (TIM_SR_CC1OF)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Clear the Capture/Compare 2 over-capture interrupt flag (CC2OF).
- * @rmtoll SR CC2OF LL_TIM_ClearFlag_CC2OVR
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_ClearFlag_CC2OVR(TIM_TypeDef *TIMx)
-{
- WRITE_REG(TIMx->SR, ~(TIM_SR_CC2OF));
-}
-
-/**
- * @brief Indicate whether Capture/Compare 2 over-capture interrupt flag (CC2OF) is set (Capture/Compare 2 over-capture interrupt is pending).
- * @rmtoll SR CC2OF LL_TIM_IsActiveFlag_CC2OVR
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC2OVR(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->SR, TIM_SR_CC2OF) == (TIM_SR_CC2OF)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Clear the Capture/Compare 3 over-capture interrupt flag (CC3OF).
- * @rmtoll SR CC3OF LL_TIM_ClearFlag_CC3OVR
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_ClearFlag_CC3OVR(TIM_TypeDef *TIMx)
-{
- WRITE_REG(TIMx->SR, ~(TIM_SR_CC3OF));
-}
-
-/**
- * @brief Indicate whether Capture/Compare 3 over-capture interrupt flag (CC3OF) is set (Capture/Compare 3 over-capture interrupt is pending).
- * @rmtoll SR CC3OF LL_TIM_IsActiveFlag_CC3OVR
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC3OVR(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->SR, TIM_SR_CC3OF) == (TIM_SR_CC3OF)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Clear the Capture/Compare 4 over-capture interrupt flag (CC4OF).
- * @rmtoll SR CC4OF LL_TIM_ClearFlag_CC4OVR
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_ClearFlag_CC4OVR(TIM_TypeDef *TIMx)
-{
- WRITE_REG(TIMx->SR, ~(TIM_SR_CC4OF));
-}
-
-/**
- * @brief Indicate whether Capture/Compare 4 over-capture interrupt flag (CC4OF) is set (Capture/Compare 4 over-capture interrupt is pending).
- * @rmtoll SR CC4OF LL_TIM_IsActiveFlag_CC4OVR
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC4OVR(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->SR, TIM_SR_CC4OF) == (TIM_SR_CC4OF)) ? 1UL : 0UL);
-}
-
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EF_IT_Management IT-Management
- * @{
- */
-/**
- * @brief Enable update interrupt (UIE).
- * @rmtoll DIER UIE LL_TIM_EnableIT_UPDATE
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_EnableIT_UPDATE(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->DIER, TIM_DIER_UIE);
-}
-
-/**
- * @brief Disable update interrupt (UIE).
- * @rmtoll DIER UIE LL_TIM_DisableIT_UPDATE
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_DisableIT_UPDATE(TIM_TypeDef *TIMx)
-{
- CLEAR_BIT(TIMx->DIER, TIM_DIER_UIE);
-}
-
-/**
- * @brief Indicates whether the update interrupt (UIE) is enabled.
- * @rmtoll DIER UIE LL_TIM_IsEnabledIT_UPDATE
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_UPDATE(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->DIER, TIM_DIER_UIE) == (TIM_DIER_UIE)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Enable capture/compare 1 interrupt (CC1IE).
- * @rmtoll DIER CC1IE LL_TIM_EnableIT_CC1
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_EnableIT_CC1(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->DIER, TIM_DIER_CC1IE);
-}
-
-/**
- * @brief Disable capture/compare 1 interrupt (CC1IE).
- * @rmtoll DIER CC1IE LL_TIM_DisableIT_CC1
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_DisableIT_CC1(TIM_TypeDef *TIMx)
-{
- CLEAR_BIT(TIMx->DIER, TIM_DIER_CC1IE);
-}
-
-/**
- * @brief Indicates whether the capture/compare 1 interrupt (CC1IE) is enabled.
- * @rmtoll DIER CC1IE LL_TIM_IsEnabledIT_CC1
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC1(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->DIER, TIM_DIER_CC1IE) == (TIM_DIER_CC1IE)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Enable capture/compare 2 interrupt (CC2IE).
- * @rmtoll DIER CC2IE LL_TIM_EnableIT_CC2
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_EnableIT_CC2(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->DIER, TIM_DIER_CC2IE);
-}
-
-/**
- * @brief Disable capture/compare 2 interrupt (CC2IE).
- * @rmtoll DIER CC2IE LL_TIM_DisableIT_CC2
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_DisableIT_CC2(TIM_TypeDef *TIMx)
-{
- CLEAR_BIT(TIMx->DIER, TIM_DIER_CC2IE);
-}
-
-/**
- * @brief Indicates whether the capture/compare 2 interrupt (CC2IE) is enabled.
- * @rmtoll DIER CC2IE LL_TIM_IsEnabledIT_CC2
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC2(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->DIER, TIM_DIER_CC2IE) == (TIM_DIER_CC2IE)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Enable capture/compare 3 interrupt (CC3IE).
- * @rmtoll DIER CC3IE LL_TIM_EnableIT_CC3
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_EnableIT_CC3(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->DIER, TIM_DIER_CC3IE);
-}
-
-/**
- * @brief Disable capture/compare 3 interrupt (CC3IE).
- * @rmtoll DIER CC3IE LL_TIM_DisableIT_CC3
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_DisableIT_CC3(TIM_TypeDef *TIMx)
-{
- CLEAR_BIT(TIMx->DIER, TIM_DIER_CC3IE);
-}
-
-/**
- * @brief Indicates whether the capture/compare 3 interrupt (CC3IE) is enabled.
- * @rmtoll DIER CC3IE LL_TIM_IsEnabledIT_CC3
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC3(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->DIER, TIM_DIER_CC3IE) == (TIM_DIER_CC3IE)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Enable capture/compare 4 interrupt (CC4IE).
- * @rmtoll DIER CC4IE LL_TIM_EnableIT_CC4
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_EnableIT_CC4(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->DIER, TIM_DIER_CC4IE);
-}
-
-/**
- * @brief Disable capture/compare 4 interrupt (CC4IE).
- * @rmtoll DIER CC4IE LL_TIM_DisableIT_CC4
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_DisableIT_CC4(TIM_TypeDef *TIMx)
-{
- CLEAR_BIT(TIMx->DIER, TIM_DIER_CC4IE);
-}
-
-/**
- * @brief Indicates whether the capture/compare 4 interrupt (CC4IE) is enabled.
- * @rmtoll DIER CC4IE LL_TIM_IsEnabledIT_CC4
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC4(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->DIER, TIM_DIER_CC4IE) == (TIM_DIER_CC4IE)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Enable commutation interrupt (COMIE).
- * @rmtoll DIER COMIE LL_TIM_EnableIT_COM
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_EnableIT_COM(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->DIER, TIM_DIER_COMIE);
-}
-
-/**
- * @brief Disable commutation interrupt (COMIE).
- * @rmtoll DIER COMIE LL_TIM_DisableIT_COM
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_DisableIT_COM(TIM_TypeDef *TIMx)
-{
- CLEAR_BIT(TIMx->DIER, TIM_DIER_COMIE);
-}
-
-/**
- * @brief Indicates whether the commutation interrupt (COMIE) is enabled.
- * @rmtoll DIER COMIE LL_TIM_IsEnabledIT_COM
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_COM(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->DIER, TIM_DIER_COMIE) == (TIM_DIER_COMIE)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Enable trigger interrupt (TIE).
- * @rmtoll DIER TIE LL_TIM_EnableIT_TRIG
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_EnableIT_TRIG(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->DIER, TIM_DIER_TIE);
-}
-
-/**
- * @brief Disable trigger interrupt (TIE).
- * @rmtoll DIER TIE LL_TIM_DisableIT_TRIG
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_DisableIT_TRIG(TIM_TypeDef *TIMx)
-{
- CLEAR_BIT(TIMx->DIER, TIM_DIER_TIE);
-}
-
-/**
- * @brief Indicates whether the trigger interrupt (TIE) is enabled.
- * @rmtoll DIER TIE LL_TIM_IsEnabledIT_TRIG
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_TRIG(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->DIER, TIM_DIER_TIE) == (TIM_DIER_TIE)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Enable break interrupt (BIE).
- * @rmtoll DIER BIE LL_TIM_EnableIT_BRK
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_EnableIT_BRK(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->DIER, TIM_DIER_BIE);
-}
-
-/**
- * @brief Disable break interrupt (BIE).
- * @rmtoll DIER BIE LL_TIM_DisableIT_BRK
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_DisableIT_BRK(TIM_TypeDef *TIMx)
-{
- CLEAR_BIT(TIMx->DIER, TIM_DIER_BIE);
-}
-
-/**
- * @brief Indicates whether the break interrupt (BIE) is enabled.
- * @rmtoll DIER BIE LL_TIM_IsEnabledIT_BRK
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_BRK(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->DIER, TIM_DIER_BIE) == (TIM_DIER_BIE)) ? 1UL : 0UL);
-}
-
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EF_DMA_Management DMA-Management
- * @{
- */
-/**
- * @brief Enable update DMA request (UDE).
- * @rmtoll DIER UDE LL_TIM_EnableDMAReq_UPDATE
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_EnableDMAReq_UPDATE(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->DIER, TIM_DIER_UDE);
-}
-
-/**
- * @brief Disable update DMA request (UDE).
- * @rmtoll DIER UDE LL_TIM_DisableDMAReq_UPDATE
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_DisableDMAReq_UPDATE(TIM_TypeDef *TIMx)
-{
- CLEAR_BIT(TIMx->DIER, TIM_DIER_UDE);
-}
-
-/**
- * @brief Indicates whether the update DMA request (UDE) is enabled.
- * @rmtoll DIER UDE LL_TIM_IsEnabledDMAReq_UPDATE
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_UPDATE(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->DIER, TIM_DIER_UDE) == (TIM_DIER_UDE)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Enable capture/compare 1 DMA request (CC1DE).
- * @rmtoll DIER CC1DE LL_TIM_EnableDMAReq_CC1
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_EnableDMAReq_CC1(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->DIER, TIM_DIER_CC1DE);
-}
-
-/**
- * @brief Disable capture/compare 1 DMA request (CC1DE).
- * @rmtoll DIER CC1DE LL_TIM_DisableDMAReq_CC1
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_DisableDMAReq_CC1(TIM_TypeDef *TIMx)
-{
- CLEAR_BIT(TIMx->DIER, TIM_DIER_CC1DE);
-}
-
-/**
- * @brief Indicates whether the capture/compare 1 DMA request (CC1DE) is enabled.
- * @rmtoll DIER CC1DE LL_TIM_IsEnabledDMAReq_CC1
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC1(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->DIER, TIM_DIER_CC1DE) == (TIM_DIER_CC1DE)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Enable capture/compare 2 DMA request (CC2DE).
- * @rmtoll DIER CC2DE LL_TIM_EnableDMAReq_CC2
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_EnableDMAReq_CC2(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->DIER, TIM_DIER_CC2DE);
-}
-
-/**
- * @brief Disable capture/compare 2 DMA request (CC2DE).
- * @rmtoll DIER CC2DE LL_TIM_DisableDMAReq_CC2
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_DisableDMAReq_CC2(TIM_TypeDef *TIMx)
-{
- CLEAR_BIT(TIMx->DIER, TIM_DIER_CC2DE);
-}
-
-/**
- * @brief Indicates whether the capture/compare 2 DMA request (CC2DE) is enabled.
- * @rmtoll DIER CC2DE LL_TIM_IsEnabledDMAReq_CC2
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC2(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->DIER, TIM_DIER_CC2DE) == (TIM_DIER_CC2DE)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Enable capture/compare 3 DMA request (CC3DE).
- * @rmtoll DIER CC3DE LL_TIM_EnableDMAReq_CC3
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_EnableDMAReq_CC3(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->DIER, TIM_DIER_CC3DE);
-}
-
-/**
- * @brief Disable capture/compare 3 DMA request (CC3DE).
- * @rmtoll DIER CC3DE LL_TIM_DisableDMAReq_CC3
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_DisableDMAReq_CC3(TIM_TypeDef *TIMx)
-{
- CLEAR_BIT(TIMx->DIER, TIM_DIER_CC3DE);
-}
-
-/**
- * @brief Indicates whether the capture/compare 3 DMA request (CC3DE) is enabled.
- * @rmtoll DIER CC3DE LL_TIM_IsEnabledDMAReq_CC3
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC3(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->DIER, TIM_DIER_CC3DE) == (TIM_DIER_CC3DE)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Enable capture/compare 4 DMA request (CC4DE).
- * @rmtoll DIER CC4DE LL_TIM_EnableDMAReq_CC4
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_EnableDMAReq_CC4(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->DIER, TIM_DIER_CC4DE);
-}
-
-/**
- * @brief Disable capture/compare 4 DMA request (CC4DE).
- * @rmtoll DIER CC4DE LL_TIM_DisableDMAReq_CC4
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_DisableDMAReq_CC4(TIM_TypeDef *TIMx)
-{
- CLEAR_BIT(TIMx->DIER, TIM_DIER_CC4DE);
-}
-
-/**
- * @brief Indicates whether the capture/compare 4 DMA request (CC4DE) is enabled.
- * @rmtoll DIER CC4DE LL_TIM_IsEnabledDMAReq_CC4
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC4(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->DIER, TIM_DIER_CC4DE) == (TIM_DIER_CC4DE)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Enable commutation DMA request (COMDE).
- * @rmtoll DIER COMDE LL_TIM_EnableDMAReq_COM
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_EnableDMAReq_COM(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->DIER, TIM_DIER_COMDE);
-}
-
-/**
- * @brief Disable commutation DMA request (COMDE).
- * @rmtoll DIER COMDE LL_TIM_DisableDMAReq_COM
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_DisableDMAReq_COM(TIM_TypeDef *TIMx)
-{
- CLEAR_BIT(TIMx->DIER, TIM_DIER_COMDE);
-}
-
-/**
- * @brief Indicates whether the commutation DMA request (COMDE) is enabled.
- * @rmtoll DIER COMDE LL_TIM_IsEnabledDMAReq_COM
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_COM(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->DIER, TIM_DIER_COMDE) == (TIM_DIER_COMDE)) ? 1UL : 0UL);
-}
-
-/**
- * @brief Enable trigger interrupt (TDE).
- * @rmtoll DIER TDE LL_TIM_EnableDMAReq_TRIG
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_EnableDMAReq_TRIG(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->DIER, TIM_DIER_TDE);
-}
-
-/**
- * @brief Disable trigger interrupt (TDE).
- * @rmtoll DIER TDE LL_TIM_DisableDMAReq_TRIG
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_DisableDMAReq_TRIG(TIM_TypeDef *TIMx)
-{
- CLEAR_BIT(TIMx->DIER, TIM_DIER_TDE);
-}
-
-/**
- * @brief Indicates whether the trigger interrupt (TDE) is enabled.
- * @rmtoll DIER TDE LL_TIM_IsEnabledDMAReq_TRIG
- * @param TIMx Timer instance
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_TRIG(TIM_TypeDef *TIMx)
-{
- return ((READ_BIT(TIMx->DIER, TIM_DIER_TDE) == (TIM_DIER_TDE)) ? 1UL : 0UL);
-}
-
-/**
- * @}
- */
-
-/** @defgroup TIM_LL_EF_EVENT_Management EVENT-Management
- * @{
- */
-/**
- * @brief Generate an update event.
- * @rmtoll EGR UG LL_TIM_GenerateEvent_UPDATE
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_GenerateEvent_UPDATE(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->EGR, TIM_EGR_UG);
-}
-
-/**
- * @brief Generate Capture/Compare 1 event.
- * @rmtoll EGR CC1G LL_TIM_GenerateEvent_CC1
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_GenerateEvent_CC1(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->EGR, TIM_EGR_CC1G);
-}
-
-/**
- * @brief Generate Capture/Compare 2 event.
- * @rmtoll EGR CC2G LL_TIM_GenerateEvent_CC2
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_GenerateEvent_CC2(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->EGR, TIM_EGR_CC2G);
-}
-
-/**
- * @brief Generate Capture/Compare 3 event.
- * @rmtoll EGR CC3G LL_TIM_GenerateEvent_CC3
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_GenerateEvent_CC3(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->EGR, TIM_EGR_CC3G);
-}
-
-/**
- * @brief Generate Capture/Compare 4 event.
- * @rmtoll EGR CC4G LL_TIM_GenerateEvent_CC4
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_GenerateEvent_CC4(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->EGR, TIM_EGR_CC4G);
-}
-
-/**
- * @brief Generate commutation event.
- * @rmtoll EGR COMG LL_TIM_GenerateEvent_COM
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_GenerateEvent_COM(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->EGR, TIM_EGR_COMG);
-}
-
-/**
- * @brief Generate trigger event.
- * @rmtoll EGR TG LL_TIM_GenerateEvent_TRIG
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_GenerateEvent_TRIG(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->EGR, TIM_EGR_TG);
-}
-
-/**
- * @brief Generate break event.
- * @rmtoll EGR BG LL_TIM_GenerateEvent_BRK
- * @param TIMx Timer instance
- * @retval None
- */
-__STATIC_INLINE void LL_TIM_GenerateEvent_BRK(TIM_TypeDef *TIMx)
-{
- SET_BIT(TIMx->EGR, TIM_EGR_BG);
-}
-
-/**
- * @}
- */
-
-#if defined(USE_FULL_LL_DRIVER)
-/** @defgroup TIM_LL_EF_Init Initialisation and deinitialisation functions
- * @{
- */
-
-ErrorStatus LL_TIM_DeInit(TIM_TypeDef *TIMx);
-void LL_TIM_StructInit(LL_TIM_InitTypeDef *TIM_InitStruct);
-ErrorStatus LL_TIM_Init(TIM_TypeDef *TIMx, LL_TIM_InitTypeDef *TIM_InitStruct);
-void LL_TIM_OC_StructInit(LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct);
-ErrorStatus LL_TIM_OC_Init(TIM_TypeDef *TIMx, uint32_t Channel, LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct);
-void LL_TIM_IC_StructInit(LL_TIM_IC_InitTypeDef *TIM_ICInitStruct);
-ErrorStatus LL_TIM_IC_Init(TIM_TypeDef *TIMx, uint32_t Channel, LL_TIM_IC_InitTypeDef *TIM_IC_InitStruct);
-void LL_TIM_ENCODER_StructInit(LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct);
-ErrorStatus LL_TIM_ENCODER_Init(TIM_TypeDef *TIMx, LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct);
-void LL_TIM_HALLSENSOR_StructInit(LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct);
-ErrorStatus LL_TIM_HALLSENSOR_Init(TIM_TypeDef *TIMx, LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct);
-void LL_TIM_BDTR_StructInit(LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct);
-ErrorStatus LL_TIM_BDTR_Init(TIM_TypeDef *TIMx, LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct);
-/**
- * @}
- */
-#endif /* USE_FULL_LL_DRIVER */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* TIM1 || TIM2 || TIM3 || TIM14 || TIM15 || TIM16 || TIM17 || TIM6 || TIM7 */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F0xx_LL_TIM_H */
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|