diff options
Diffstat (limited to 'fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_exti.h')
| -rw-r--r-- | fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_exti.h | 1016 |
1 files changed, 0 insertions, 1016 deletions
diff --git a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_exti.h b/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_exti.h deleted file mode 100644 index b26dc0a..0000000 --- a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_exti.h +++ /dev/null @@ -1,1016 +0,0 @@ -/**
- ******************************************************************************
- * @file stm32f0xx_ll_exti.h
- * @author MCD Application Team
- * @brief Header file of EXTI LL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F0xx_LL_EXTI_H
-#define __STM32F0xx_LL_EXTI_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx.h"
-
-/** @addtogroup STM32F0xx_LL_Driver
- * @{
- */
-
-#if defined (EXTI)
-
-/** @defgroup EXTI_LL EXTI
- * @{
- */
-
-/* Private types -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private constants ---------------------------------------------------------*/
-/* Private Macros ------------------------------------------------------------*/
-#if defined(USE_FULL_LL_DRIVER)
-/** @defgroup EXTI_LL_Private_Macros EXTI Private Macros
- * @{
- */
-/**
- * @}
- */
-#endif /*USE_FULL_LL_DRIVER*/
-/* Exported types ------------------------------------------------------------*/
-#if defined(USE_FULL_LL_DRIVER)
-/** @defgroup EXTI_LL_ES_INIT EXTI Exported Init structure
- * @{
- */
-typedef struct
-{
-
- uint32_t Line_0_31; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 0 to 31
- This parameter can be any combination of @ref EXTI_LL_EC_LINE */
-
- FunctionalState LineCommand; /*!< Specifies the new state of the selected EXTI lines.
- This parameter can be set either to ENABLE or DISABLE */
-
- uint8_t Mode; /*!< Specifies the mode for the EXTI lines.
- This parameter can be a value of @ref EXTI_LL_EC_MODE. */
-
- uint8_t Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines.
- This parameter can be a value of @ref EXTI_LL_EC_TRIGGER. */
-} LL_EXTI_InitTypeDef;
-
-/**
- * @}
- */
-#endif /*USE_FULL_LL_DRIVER*/
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup EXTI_LL_Exported_Constants EXTI Exported Constants
- * @{
- */
-
-/** @defgroup EXTI_LL_EC_LINE LINE
- * @{
- */
-#define LL_EXTI_LINE_0 EXTI_IMR_IM0 /*!< Extended line 0 */
-#define LL_EXTI_LINE_1 EXTI_IMR_IM1 /*!< Extended line 1 */
-#define LL_EXTI_LINE_2 EXTI_IMR_IM2 /*!< Extended line 2 */
-#define LL_EXTI_LINE_3 EXTI_IMR_IM3 /*!< Extended line 3 */
-#define LL_EXTI_LINE_4 EXTI_IMR_IM4 /*!< Extended line 4 */
-#define LL_EXTI_LINE_5 EXTI_IMR_IM5 /*!< Extended line 5 */
-#define LL_EXTI_LINE_6 EXTI_IMR_IM6 /*!< Extended line 6 */
-#define LL_EXTI_LINE_7 EXTI_IMR_IM7 /*!< Extended line 7 */
-#define LL_EXTI_LINE_8 EXTI_IMR_IM8 /*!< Extended line 8 */
-#define LL_EXTI_LINE_9 EXTI_IMR_IM9 /*!< Extended line 9 */
-#define LL_EXTI_LINE_10 EXTI_IMR_IM10 /*!< Extended line 10 */
-#define LL_EXTI_LINE_11 EXTI_IMR_IM11 /*!< Extended line 11 */
-#define LL_EXTI_LINE_12 EXTI_IMR_IM12 /*!< Extended line 12 */
-#define LL_EXTI_LINE_13 EXTI_IMR_IM13 /*!< Extended line 13 */
-#define LL_EXTI_LINE_14 EXTI_IMR_IM14 /*!< Extended line 14 */
-#define LL_EXTI_LINE_15 EXTI_IMR_IM15 /*!< Extended line 15 */
-#if defined(EXTI_IMR_IM16)
-#define LL_EXTI_LINE_16 EXTI_IMR_IM16 /*!< Extended line 16 */
-#endif
-#define LL_EXTI_LINE_17 EXTI_IMR_IM17 /*!< Extended line 17 */
-#if defined(EXTI_IMR_IM18)
-#define LL_EXTI_LINE_18 EXTI_IMR_IM18 /*!< Extended line 18 */
-#endif
-#define LL_EXTI_LINE_19 EXTI_IMR_IM19 /*!< Extended line 19 */
-#if defined(EXTI_IMR_IM20)
-#define LL_EXTI_LINE_20 EXTI_IMR_IM20 /*!< Extended line 20 */
-#endif
-#if defined(EXTI_IMR_IM21)
-#define LL_EXTI_LINE_21 EXTI_IMR_IM21 /*!< Extended line 21 */
-#endif
-#if defined(EXTI_IMR_IM22)
-#define LL_EXTI_LINE_22 EXTI_IMR_IM22 /*!< Extended line 22 */
-#endif
-#define LL_EXTI_LINE_23 EXTI_IMR_IM23 /*!< Extended line 23 */
-#if defined(EXTI_IMR_IM24)
-#define LL_EXTI_LINE_24 EXTI_IMR_IM24 /*!< Extended line 24 */
-#endif
-#if defined(EXTI_IMR_IM25)
-#define LL_EXTI_LINE_25 EXTI_IMR_IM25 /*!< Extended line 25 */
-#endif
-#if defined(EXTI_IMR_IM26)
-#define LL_EXTI_LINE_26 EXTI_IMR_IM26 /*!< Extended line 26 */
-#endif
-#if defined(EXTI_IMR_IM27)
-#define LL_EXTI_LINE_27 EXTI_IMR_IM27 /*!< Extended line 27 */
-#endif
-#if defined(EXTI_IMR_IM28)
-#define LL_EXTI_LINE_28 EXTI_IMR_IM28 /*!< Extended line 28 */
-#endif
-#if defined(EXTI_IMR_IM29)
-#define LL_EXTI_LINE_29 EXTI_IMR_IM29 /*!< Extended line 29 */
-#endif
-#if defined(EXTI_IMR_IM30)
-#define LL_EXTI_LINE_30 EXTI_IMR_IM30 /*!< Extended line 30 */
-#endif
-#if defined(EXTI_IMR_IM31)
-#define LL_EXTI_LINE_31 EXTI_IMR_IM31 /*!< Extended line 31 */
-#endif
-#define LL_EXTI_LINE_ALL_0_31 EXTI_IMR_IM /*!< All Extended line not reserved*/
-
-
-#define LL_EXTI_LINE_ALL (0xFFFFFFFFU) /*!< All Extended line */
-
-#if defined(USE_FULL_LL_DRIVER)
-#define LL_EXTI_LINE_NONE (0x00000000U) /*!< None Extended line */
-#endif /*USE_FULL_LL_DRIVER*/
-
-/**
- * @}
- */
-#if defined(USE_FULL_LL_DRIVER)
-
-/** @defgroup EXTI_LL_EC_MODE Mode
- * @{
- */
-#define LL_EXTI_MODE_IT ((uint8_t)0x00U) /*!< Interrupt Mode */
-#define LL_EXTI_MODE_EVENT ((uint8_t)0x01U) /*!< Event Mode */
-#define LL_EXTI_MODE_IT_EVENT ((uint8_t)0x02U) /*!< Interrupt & Event Mode */
-/**
- * @}
- */
-
-/** @defgroup EXTI_LL_EC_TRIGGER Edge Trigger
- * @{
- */
-#define LL_EXTI_TRIGGER_NONE ((uint8_t)0x00U) /*!< No Trigger Mode */
-#define LL_EXTI_TRIGGER_RISING ((uint8_t)0x01U) /*!< Trigger Rising Mode */
-#define LL_EXTI_TRIGGER_FALLING ((uint8_t)0x02U) /*!< Trigger Falling Mode */
-#define LL_EXTI_TRIGGER_RISING_FALLING ((uint8_t)0x03U) /*!< Trigger Rising & Falling Mode */
-
-/**
- * @}
- */
-
-
-#endif /*USE_FULL_LL_DRIVER*/
-
-
-/**
- * @}
- */
-
-/* Exported macro ------------------------------------------------------------*/
-/** @defgroup EXTI_LL_Exported_Macros EXTI Exported Macros
- * @{
- */
-
-/** @defgroup EXTI_LL_EM_WRITE_READ Common Write and read registers Macros
- * @{
- */
-
-/**
- * @brief Write a value in EXTI register
- * @param __REG__ Register to be written
- * @param __VALUE__ Value to be written in the register
- * @retval None
- */
-#define LL_EXTI_WriteReg(__REG__, __VALUE__) WRITE_REG(EXTI->__REG__, (__VALUE__))
-
-/**
- * @brief Read a value in EXTI register
- * @param __REG__ Register to be read
- * @retval Register value
- */
-#define LL_EXTI_ReadReg(__REG__) READ_REG(EXTI->__REG__)
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup EXTI_LL_Exported_Functions EXTI Exported Functions
- * @{
- */
-/** @defgroup EXTI_LL_EF_IT_Management IT_Management
- * @{
- */
-
-/**
- * @brief Enable ExtiLine Interrupt request for Lines in range 0 to 31
- * @note The reset value for the direct or internal lines (see RM)
- * is set to 1 in order to enable the interrupt by default.
- * Bits are set automatically at Power on.
- * @rmtoll IMR IMx LL_EXTI_EnableIT_0_31
- * @param ExtiLine This parameter can be one of the following values:
- * @arg @ref LL_EXTI_LINE_0
- * @arg @ref LL_EXTI_LINE_1
- * @arg @ref LL_EXTI_LINE_2
- * @arg @ref LL_EXTI_LINE_3
- * @arg @ref LL_EXTI_LINE_4
- * @arg @ref LL_EXTI_LINE_5
- * @arg @ref LL_EXTI_LINE_6
- * @arg @ref LL_EXTI_LINE_7
- * @arg @ref LL_EXTI_LINE_8
- * @arg @ref LL_EXTI_LINE_9
- * @arg @ref LL_EXTI_LINE_10
- * @arg @ref LL_EXTI_LINE_11
- * @arg @ref LL_EXTI_LINE_12
- * @arg @ref LL_EXTI_LINE_13
- * @arg @ref LL_EXTI_LINE_14
- * @arg @ref LL_EXTI_LINE_15
- * @arg @ref LL_EXTI_LINE_16
- * @arg @ref LL_EXTI_LINE_17
- * @arg @ref LL_EXTI_LINE_18
- * @arg @ref LL_EXTI_LINE_19
- * @arg @ref LL_EXTI_LINE_20
- * @arg @ref LL_EXTI_LINE_21
- * @arg @ref LL_EXTI_LINE_22
- * @arg @ref LL_EXTI_LINE_23
- * @arg @ref LL_EXTI_LINE_24
- * @arg @ref LL_EXTI_LINE_25
- * @arg @ref LL_EXTI_LINE_26
- * @arg @ref LL_EXTI_LINE_27
- * @arg @ref LL_EXTI_LINE_28
- * @arg @ref LL_EXTI_LINE_29
- * @arg @ref LL_EXTI_LINE_30
- * @arg @ref LL_EXTI_LINE_31
- * @arg @ref LL_EXTI_LINE_ALL_0_31
- * @note Please check each device line mapping for EXTI Line availability
- * @retval None
- */
-__STATIC_INLINE void LL_EXTI_EnableIT_0_31(uint32_t ExtiLine)
-{
- SET_BIT(EXTI->IMR, ExtiLine);
-}
-
-/**
- * @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31
- * @note The reset value for the direct or internal lines (see RM)
- * is set to 1 in order to enable the interrupt by default.
- * Bits are set automatically at Power on.
- * @rmtoll IMR IMx LL_EXTI_DisableIT_0_31
- * @param ExtiLine This parameter can be one of the following values:
- * @arg @ref LL_EXTI_LINE_0
- * @arg @ref LL_EXTI_LINE_1
- * @arg @ref LL_EXTI_LINE_2
- * @arg @ref LL_EXTI_LINE_3
- * @arg @ref LL_EXTI_LINE_4
- * @arg @ref LL_EXTI_LINE_5
- * @arg @ref LL_EXTI_LINE_6
- * @arg @ref LL_EXTI_LINE_7
- * @arg @ref LL_EXTI_LINE_8
- * @arg @ref LL_EXTI_LINE_9
- * @arg @ref LL_EXTI_LINE_10
- * @arg @ref LL_EXTI_LINE_11
- * @arg @ref LL_EXTI_LINE_12
- * @arg @ref LL_EXTI_LINE_13
- * @arg @ref LL_EXTI_LINE_14
- * @arg @ref LL_EXTI_LINE_15
- * @arg @ref LL_EXTI_LINE_16
- * @arg @ref LL_EXTI_LINE_17
- * @arg @ref LL_EXTI_LINE_18
- * @arg @ref LL_EXTI_LINE_19
- * @arg @ref LL_EXTI_LINE_20
- * @arg @ref LL_EXTI_LINE_21
- * @arg @ref LL_EXTI_LINE_22
- * @arg @ref LL_EXTI_LINE_23
- * @arg @ref LL_EXTI_LINE_24
- * @arg @ref LL_EXTI_LINE_25
- * @arg @ref LL_EXTI_LINE_26
- * @arg @ref LL_EXTI_LINE_27
- * @arg @ref LL_EXTI_LINE_28
- * @arg @ref LL_EXTI_LINE_29
- * @arg @ref LL_EXTI_LINE_30
- * @arg @ref LL_EXTI_LINE_31
- * @arg @ref LL_EXTI_LINE_ALL_0_31
- * @note Please check each device line mapping for EXTI Line availability
- * @retval None
- */
-__STATIC_INLINE void LL_EXTI_DisableIT_0_31(uint32_t ExtiLine)
-{
- CLEAR_BIT(EXTI->IMR, ExtiLine);
-}
-
-
-/**
- * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31
- * @note The reset value for the direct or internal lines (see RM)
- * is set to 1 in order to enable the interrupt by default.
- * Bits are set automatically at Power on.
- * @rmtoll IMR IMx LL_EXTI_IsEnabledIT_0_31
- * @param ExtiLine This parameter can be one of the following values:
- * @arg @ref LL_EXTI_LINE_0
- * @arg @ref LL_EXTI_LINE_1
- * @arg @ref LL_EXTI_LINE_2
- * @arg @ref LL_EXTI_LINE_3
- * @arg @ref LL_EXTI_LINE_4
- * @arg @ref LL_EXTI_LINE_5
- * @arg @ref LL_EXTI_LINE_6
- * @arg @ref LL_EXTI_LINE_7
- * @arg @ref LL_EXTI_LINE_8
- * @arg @ref LL_EXTI_LINE_9
- * @arg @ref LL_EXTI_LINE_10
- * @arg @ref LL_EXTI_LINE_11
- * @arg @ref LL_EXTI_LINE_12
- * @arg @ref LL_EXTI_LINE_13
- * @arg @ref LL_EXTI_LINE_14
- * @arg @ref LL_EXTI_LINE_15
- * @arg @ref LL_EXTI_LINE_16
- * @arg @ref LL_EXTI_LINE_17
- * @arg @ref LL_EXTI_LINE_18
- * @arg @ref LL_EXTI_LINE_19
- * @arg @ref LL_EXTI_LINE_20
- * @arg @ref LL_EXTI_LINE_21
- * @arg @ref LL_EXTI_LINE_22
- * @arg @ref LL_EXTI_LINE_23
- * @arg @ref LL_EXTI_LINE_24
- * @arg @ref LL_EXTI_LINE_25
- * @arg @ref LL_EXTI_LINE_26
- * @arg @ref LL_EXTI_LINE_27
- * @arg @ref LL_EXTI_LINE_28
- * @arg @ref LL_EXTI_LINE_29
- * @arg @ref LL_EXTI_LINE_30
- * @arg @ref LL_EXTI_LINE_31
- * @arg @ref LL_EXTI_LINE_ALL_0_31
- * @note Please check each device line mapping for EXTI Line availability
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine)
-{
- return (READ_BIT(EXTI->IMR, ExtiLine) == (ExtiLine));
-}
-
-
-/**
- * @}
- */
-
-/** @defgroup EXTI_LL_EF_Event_Management Event_Management
- * @{
- */
-
-/**
- * @brief Enable ExtiLine Event request for Lines in range 0 to 31
- * @rmtoll EMR EMx LL_EXTI_EnableEvent_0_31
- * @param ExtiLine This parameter can be one of the following values:
- * @arg @ref LL_EXTI_LINE_0
- * @arg @ref LL_EXTI_LINE_1
- * @arg @ref LL_EXTI_LINE_2
- * @arg @ref LL_EXTI_LINE_3
- * @arg @ref LL_EXTI_LINE_4
- * @arg @ref LL_EXTI_LINE_5
- * @arg @ref LL_EXTI_LINE_6
- * @arg @ref LL_EXTI_LINE_7
- * @arg @ref LL_EXTI_LINE_8
- * @arg @ref LL_EXTI_LINE_9
- * @arg @ref LL_EXTI_LINE_10
- * @arg @ref LL_EXTI_LINE_11
- * @arg @ref LL_EXTI_LINE_12
- * @arg @ref LL_EXTI_LINE_13
- * @arg @ref LL_EXTI_LINE_14
- * @arg @ref LL_EXTI_LINE_15
- * @arg @ref LL_EXTI_LINE_16
- * @arg @ref LL_EXTI_LINE_17
- * @arg @ref LL_EXTI_LINE_18
- * @arg @ref LL_EXTI_LINE_19
- * @arg @ref LL_EXTI_LINE_20
- * @arg @ref LL_EXTI_LINE_21
- * @arg @ref LL_EXTI_LINE_22
- * @arg @ref LL_EXTI_LINE_23
- * @arg @ref LL_EXTI_LINE_24
- * @arg @ref LL_EXTI_LINE_25
- * @arg @ref LL_EXTI_LINE_26
- * @arg @ref LL_EXTI_LINE_27
- * @arg @ref LL_EXTI_LINE_28
- * @arg @ref LL_EXTI_LINE_29
- * @arg @ref LL_EXTI_LINE_30
- * @arg @ref LL_EXTI_LINE_31
- * @arg @ref LL_EXTI_LINE_ALL_0_31
- * @note Please check each device line mapping for EXTI Line availability
- * @retval None
- */
-__STATIC_INLINE void LL_EXTI_EnableEvent_0_31(uint32_t ExtiLine)
-{
- SET_BIT(EXTI->EMR, ExtiLine);
-
-}
-
-
-/**
- * @brief Disable ExtiLine Event request for Lines in range 0 to 31
- * @rmtoll EMR EMx LL_EXTI_DisableEvent_0_31
- * @param ExtiLine This parameter can be one of the following values:
- * @arg @ref LL_EXTI_LINE_0
- * @arg @ref LL_EXTI_LINE_1
- * @arg @ref LL_EXTI_LINE_2
- * @arg @ref LL_EXTI_LINE_3
- * @arg @ref LL_EXTI_LINE_4
- * @arg @ref LL_EXTI_LINE_5
- * @arg @ref LL_EXTI_LINE_6
- * @arg @ref LL_EXTI_LINE_7
- * @arg @ref LL_EXTI_LINE_8
- * @arg @ref LL_EXTI_LINE_9
- * @arg @ref LL_EXTI_LINE_10
- * @arg @ref LL_EXTI_LINE_11
- * @arg @ref LL_EXTI_LINE_12
- * @arg @ref LL_EXTI_LINE_13
- * @arg @ref LL_EXTI_LINE_14
- * @arg @ref LL_EXTI_LINE_15
- * @arg @ref LL_EXTI_LINE_16
- * @arg @ref LL_EXTI_LINE_17
- * @arg @ref LL_EXTI_LINE_18
- * @arg @ref LL_EXTI_LINE_19
- * @arg @ref LL_EXTI_LINE_20
- * @arg @ref LL_EXTI_LINE_21
- * @arg @ref LL_EXTI_LINE_22
- * @arg @ref LL_EXTI_LINE_23
- * @arg @ref LL_EXTI_LINE_24
- * @arg @ref LL_EXTI_LINE_25
- * @arg @ref LL_EXTI_LINE_26
- * @arg @ref LL_EXTI_LINE_27
- * @arg @ref LL_EXTI_LINE_28
- * @arg @ref LL_EXTI_LINE_29
- * @arg @ref LL_EXTI_LINE_30
- * @arg @ref LL_EXTI_LINE_31
- * @arg @ref LL_EXTI_LINE_ALL_0_31
- * @note Please check each device line mapping for EXTI Line availability
- * @retval None
- */
-__STATIC_INLINE void LL_EXTI_DisableEvent_0_31(uint32_t ExtiLine)
-{
- CLEAR_BIT(EXTI->EMR, ExtiLine);
-}
-
-
-/**
- * @brief Indicate if ExtiLine Event request is enabled for Lines in range 0 to 31
- * @rmtoll EMR EMx LL_EXTI_IsEnabledEvent_0_31
- * @param ExtiLine This parameter can be one of the following values:
- * @arg @ref LL_EXTI_LINE_0
- * @arg @ref LL_EXTI_LINE_1
- * @arg @ref LL_EXTI_LINE_2
- * @arg @ref LL_EXTI_LINE_3
- * @arg @ref LL_EXTI_LINE_4
- * @arg @ref LL_EXTI_LINE_5
- * @arg @ref LL_EXTI_LINE_6
- * @arg @ref LL_EXTI_LINE_7
- * @arg @ref LL_EXTI_LINE_8
- * @arg @ref LL_EXTI_LINE_9
- * @arg @ref LL_EXTI_LINE_10
- * @arg @ref LL_EXTI_LINE_11
- * @arg @ref LL_EXTI_LINE_12
- * @arg @ref LL_EXTI_LINE_13
- * @arg @ref LL_EXTI_LINE_14
- * @arg @ref LL_EXTI_LINE_15
- * @arg @ref LL_EXTI_LINE_16
- * @arg @ref LL_EXTI_LINE_17
- * @arg @ref LL_EXTI_LINE_18
- * @arg @ref LL_EXTI_LINE_19
- * @arg @ref LL_EXTI_LINE_20
- * @arg @ref LL_EXTI_LINE_21
- * @arg @ref LL_EXTI_LINE_22
- * @arg @ref LL_EXTI_LINE_23
- * @arg @ref LL_EXTI_LINE_24
- * @arg @ref LL_EXTI_LINE_25
- * @arg @ref LL_EXTI_LINE_26
- * @arg @ref LL_EXTI_LINE_27
- * @arg @ref LL_EXTI_LINE_28
- * @arg @ref LL_EXTI_LINE_29
- * @arg @ref LL_EXTI_LINE_30
- * @arg @ref LL_EXTI_LINE_31
- * @arg @ref LL_EXTI_LINE_ALL_0_31
- * @note Please check each device line mapping for EXTI Line availability
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine)
-{
- return (READ_BIT(EXTI->EMR, ExtiLine) == (ExtiLine));
-
-}
-
-
-/**
- * @}
- */
-
-/** @defgroup EXTI_LL_EF_Rising_Trigger_Management Rising_Trigger_Management
- * @{
- */
-
-/**
- * @brief Enable ExtiLine Rising Edge Trigger for Lines in range 0 to 31
- * @note The configurable wakeup lines are edge-triggered. No glitch must be
- * generated on these lines. If a rising edge on a configurable interrupt
- * line occurs during a write operation in the EXTI_RTSR register, the
- * pending bit is not set.
- * Rising and falling edge triggers can be set for
- * the same interrupt line. In this case, both generate a trigger
- * condition.
- * @rmtoll RTSR RTx LL_EXTI_EnableRisingTrig_0_31
- * @param ExtiLine This parameter can be a combination of the following values:
- * @arg @ref LL_EXTI_LINE_0
- * @arg @ref LL_EXTI_LINE_1
- * @arg @ref LL_EXTI_LINE_2
- * @arg @ref LL_EXTI_LINE_3
- * @arg @ref LL_EXTI_LINE_4
- * @arg @ref LL_EXTI_LINE_5
- * @arg @ref LL_EXTI_LINE_6
- * @arg @ref LL_EXTI_LINE_7
- * @arg @ref LL_EXTI_LINE_8
- * @arg @ref LL_EXTI_LINE_9
- * @arg @ref LL_EXTI_LINE_10
- * @arg @ref LL_EXTI_LINE_11
- * @arg @ref LL_EXTI_LINE_12
- * @arg @ref LL_EXTI_LINE_13
- * @arg @ref LL_EXTI_LINE_14
- * @arg @ref LL_EXTI_LINE_15
- * @arg @ref LL_EXTI_LINE_16
- * @arg @ref LL_EXTI_LINE_18
- * @arg @ref LL_EXTI_LINE_19
- * @arg @ref LL_EXTI_LINE_20
- * @arg @ref LL_EXTI_LINE_21
- * @arg @ref LL_EXTI_LINE_22
- * @arg @ref LL_EXTI_LINE_29
- * @arg @ref LL_EXTI_LINE_30
- * @arg @ref LL_EXTI_LINE_31
- * @note Please check each device line mapping for EXTI Line availability
- * @retval None
- */
-__STATIC_INLINE void LL_EXTI_EnableRisingTrig_0_31(uint32_t ExtiLine)
-{
- SET_BIT(EXTI->RTSR, ExtiLine);
-
-}
-
-
-/**
- * @brief Disable ExtiLine Rising Edge Trigger for Lines in range 0 to 31
- * @note The configurable wakeup lines are edge-triggered. No glitch must be
- * generated on these lines. If a rising edge on a configurable interrupt
- * line occurs during a write operation in the EXTI_RTSR register, the
- * pending bit is not set.
- * Rising and falling edge triggers can be set for
- * the same interrupt line. In this case, both generate a trigger
- * condition.
- * @rmtoll RTSR RTx LL_EXTI_DisableRisingTrig_0_31
- * @param ExtiLine This parameter can be a combination of the following values:
- * @arg @ref LL_EXTI_LINE_0
- * @arg @ref LL_EXTI_LINE_1
- * @arg @ref LL_EXTI_LINE_2
- * @arg @ref LL_EXTI_LINE_3
- * @arg @ref LL_EXTI_LINE_4
- * @arg @ref LL_EXTI_LINE_5
- * @arg @ref LL_EXTI_LINE_6
- * @arg @ref LL_EXTI_LINE_7
- * @arg @ref LL_EXTI_LINE_8
- * @arg @ref LL_EXTI_LINE_9
- * @arg @ref LL_EXTI_LINE_10
- * @arg @ref LL_EXTI_LINE_11
- * @arg @ref LL_EXTI_LINE_12
- * @arg @ref LL_EXTI_LINE_13
- * @arg @ref LL_EXTI_LINE_14
- * @arg @ref LL_EXTI_LINE_15
- * @arg @ref LL_EXTI_LINE_16
- * @arg @ref LL_EXTI_LINE_18
- * @arg @ref LL_EXTI_LINE_19
- * @arg @ref LL_EXTI_LINE_20
- * @arg @ref LL_EXTI_LINE_21
- * @arg @ref LL_EXTI_LINE_22
- * @arg @ref LL_EXTI_LINE_29
- * @arg @ref LL_EXTI_LINE_30
- * @arg @ref LL_EXTI_LINE_31
- * @note Please check each device line mapping for EXTI Line availability
- * @retval None
- */
-__STATIC_INLINE void LL_EXTI_DisableRisingTrig_0_31(uint32_t ExtiLine)
-{
- CLEAR_BIT(EXTI->RTSR, ExtiLine);
-
-}
-
-
-/**
- * @brief Check if rising edge trigger is enabled for Lines in range 0 to 31
- * @rmtoll RTSR RTx LL_EXTI_IsEnabledRisingTrig_0_31
- * @param ExtiLine This parameter can be a combination of the following values:
- * @arg @ref LL_EXTI_LINE_0
- * @arg @ref LL_EXTI_LINE_1
- * @arg @ref LL_EXTI_LINE_2
- * @arg @ref LL_EXTI_LINE_3
- * @arg @ref LL_EXTI_LINE_4
- * @arg @ref LL_EXTI_LINE_5
- * @arg @ref LL_EXTI_LINE_6
- * @arg @ref LL_EXTI_LINE_7
- * @arg @ref LL_EXTI_LINE_8
- * @arg @ref LL_EXTI_LINE_9
- * @arg @ref LL_EXTI_LINE_10
- * @arg @ref LL_EXTI_LINE_11
- * @arg @ref LL_EXTI_LINE_12
- * @arg @ref LL_EXTI_LINE_13
- * @arg @ref LL_EXTI_LINE_14
- * @arg @ref LL_EXTI_LINE_15
- * @arg @ref LL_EXTI_LINE_16
- * @arg @ref LL_EXTI_LINE_18
- * @arg @ref LL_EXTI_LINE_19
- * @arg @ref LL_EXTI_LINE_20
- * @arg @ref LL_EXTI_LINE_21
- * @arg @ref LL_EXTI_LINE_22
- * @arg @ref LL_EXTI_LINE_29
- * @arg @ref LL_EXTI_LINE_30
- * @arg @ref LL_EXTI_LINE_31
- * @note Please check each device line mapping for EXTI Line availability
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_0_31(uint32_t ExtiLine)
-{
- return (READ_BIT(EXTI->RTSR, ExtiLine) == (ExtiLine));
-}
-
-
-/**
- * @}
- */
-
-/** @defgroup EXTI_LL_EF_Falling_Trigger_Management Falling_Trigger_Management
- * @{
- */
-
-/**
- * @brief Enable ExtiLine Falling Edge Trigger for Lines in range 0 to 31
- * @note The configurable wakeup lines are edge-triggered. No glitch must be
- * generated on these lines. If a falling edge on a configurable interrupt
- * line occurs during a write operation in the EXTI_FTSR register, the
- * pending bit is not set.
- * Rising and falling edge triggers can be set for
- * the same interrupt line. In this case, both generate a trigger
- * condition.
- * @rmtoll FTSR FTx LL_EXTI_EnableFallingTrig_0_31
- * @param ExtiLine This parameter can be a combination of the following values:
- * @arg @ref LL_EXTI_LINE_0
- * @arg @ref LL_EXTI_LINE_1
- * @arg @ref LL_EXTI_LINE_2
- * @arg @ref LL_EXTI_LINE_3
- * @arg @ref LL_EXTI_LINE_4
- * @arg @ref LL_EXTI_LINE_5
- * @arg @ref LL_EXTI_LINE_6
- * @arg @ref LL_EXTI_LINE_7
- * @arg @ref LL_EXTI_LINE_8
- * @arg @ref LL_EXTI_LINE_9
- * @arg @ref LL_EXTI_LINE_10
- * @arg @ref LL_EXTI_LINE_11
- * @arg @ref LL_EXTI_LINE_12
- * @arg @ref LL_EXTI_LINE_13
- * @arg @ref LL_EXTI_LINE_14
- * @arg @ref LL_EXTI_LINE_15
- * @arg @ref LL_EXTI_LINE_16
- * @arg @ref LL_EXTI_LINE_18
- * @arg @ref LL_EXTI_LINE_19
- * @arg @ref LL_EXTI_LINE_20
- * @arg @ref LL_EXTI_LINE_21
- * @arg @ref LL_EXTI_LINE_22
- * @arg @ref LL_EXTI_LINE_29
- * @arg @ref LL_EXTI_LINE_30
- * @arg @ref LL_EXTI_LINE_31
- * @note Please check each device line mapping for EXTI Line availability
- * @retval None
- */
-__STATIC_INLINE void LL_EXTI_EnableFallingTrig_0_31(uint32_t ExtiLine)
-{
- SET_BIT(EXTI->FTSR, ExtiLine);
-}
-
-
-/**
- * @brief Disable ExtiLine Falling Edge Trigger for Lines in range 0 to 31
- * @note The configurable wakeup lines are edge-triggered. No glitch must be
- * generated on these lines. If a Falling edge on a configurable interrupt
- * line occurs during a write operation in the EXTI_FTSR register, the
- * pending bit is not set.
- * Rising and falling edge triggers can be set for the same interrupt line.
- * In this case, both generate a trigger condition.
- * @rmtoll FTSR FTx LL_EXTI_DisableFallingTrig_0_31
- * @param ExtiLine This parameter can be a combination of the following values:
- * @arg @ref LL_EXTI_LINE_0
- * @arg @ref LL_EXTI_LINE_1
- * @arg @ref LL_EXTI_LINE_2
- * @arg @ref LL_EXTI_LINE_3
- * @arg @ref LL_EXTI_LINE_4
- * @arg @ref LL_EXTI_LINE_5
- * @arg @ref LL_EXTI_LINE_6
- * @arg @ref LL_EXTI_LINE_7
- * @arg @ref LL_EXTI_LINE_8
- * @arg @ref LL_EXTI_LINE_9
- * @arg @ref LL_EXTI_LINE_10
- * @arg @ref LL_EXTI_LINE_11
- * @arg @ref LL_EXTI_LINE_12
- * @arg @ref LL_EXTI_LINE_13
- * @arg @ref LL_EXTI_LINE_14
- * @arg @ref LL_EXTI_LINE_15
- * @arg @ref LL_EXTI_LINE_16
- * @arg @ref LL_EXTI_LINE_18
- * @arg @ref LL_EXTI_LINE_19
- * @arg @ref LL_EXTI_LINE_20
- * @arg @ref LL_EXTI_LINE_21
- * @arg @ref LL_EXTI_LINE_22
- * @arg @ref LL_EXTI_LINE_29
- * @arg @ref LL_EXTI_LINE_30
- * @arg @ref LL_EXTI_LINE_31
- * @note Please check each device line mapping for EXTI Line availability
- * @retval None
- */
-__STATIC_INLINE void LL_EXTI_DisableFallingTrig_0_31(uint32_t ExtiLine)
-{
- CLEAR_BIT(EXTI->FTSR, ExtiLine);
-}
-
-
-/**
- * @brief Check if falling edge trigger is enabled for Lines in range 0 to 31
- * @rmtoll FTSR FTx LL_EXTI_IsEnabledFallingTrig_0_31
- * @param ExtiLine This parameter can be a combination of the following values:
- * @arg @ref LL_EXTI_LINE_0
- * @arg @ref LL_EXTI_LINE_1
- * @arg @ref LL_EXTI_LINE_2
- * @arg @ref LL_EXTI_LINE_3
- * @arg @ref LL_EXTI_LINE_4
- * @arg @ref LL_EXTI_LINE_5
- * @arg @ref LL_EXTI_LINE_6
- * @arg @ref LL_EXTI_LINE_7
- * @arg @ref LL_EXTI_LINE_8
- * @arg @ref LL_EXTI_LINE_9
- * @arg @ref LL_EXTI_LINE_10
- * @arg @ref LL_EXTI_LINE_11
- * @arg @ref LL_EXTI_LINE_12
- * @arg @ref LL_EXTI_LINE_13
- * @arg @ref LL_EXTI_LINE_14
- * @arg @ref LL_EXTI_LINE_15
- * @arg @ref LL_EXTI_LINE_16
- * @arg @ref LL_EXTI_LINE_18
- * @arg @ref LL_EXTI_LINE_19
- * @arg @ref LL_EXTI_LINE_20
- * @arg @ref LL_EXTI_LINE_21
- * @arg @ref LL_EXTI_LINE_22
- * @arg @ref LL_EXTI_LINE_29
- * @arg @ref LL_EXTI_LINE_30
- * @arg @ref LL_EXTI_LINE_31
- * @note Please check each device line mapping for EXTI Line availability
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_0_31(uint32_t ExtiLine)
-{
- return (READ_BIT(EXTI->FTSR, ExtiLine) == (ExtiLine));
-}
-
-
-/**
- * @}
- */
-
-/** @defgroup EXTI_LL_EF_Software_Interrupt_Management Software_Interrupt_Management
- * @{
- */
-
-/**
- * @brief Generate a software Interrupt Event for Lines in range 0 to 31
- * @note If the interrupt is enabled on this line in the EXTI_IMR, writing a 1 to
- * this bit when it is at '0' sets the corresponding pending bit in EXTI_PR
- * resulting in an interrupt request generation.
- * This bit is cleared by clearing the corresponding bit in the EXTI_PR
- * register (by writing a 1 into the bit)
- * @rmtoll SWIER SWIx LL_EXTI_GenerateSWI_0_31
- * @param ExtiLine This parameter can be a combination of the following values:
- * @arg @ref LL_EXTI_LINE_0
- * @arg @ref LL_EXTI_LINE_1
- * @arg @ref LL_EXTI_LINE_2
- * @arg @ref LL_EXTI_LINE_3
- * @arg @ref LL_EXTI_LINE_4
- * @arg @ref LL_EXTI_LINE_5
- * @arg @ref LL_EXTI_LINE_6
- * @arg @ref LL_EXTI_LINE_7
- * @arg @ref LL_EXTI_LINE_8
- * @arg @ref LL_EXTI_LINE_9
- * @arg @ref LL_EXTI_LINE_10
- * @arg @ref LL_EXTI_LINE_11
- * @arg @ref LL_EXTI_LINE_12
- * @arg @ref LL_EXTI_LINE_13
- * @arg @ref LL_EXTI_LINE_14
- * @arg @ref LL_EXTI_LINE_15
- * @arg @ref LL_EXTI_LINE_16
- * @arg @ref LL_EXTI_LINE_18
- * @arg @ref LL_EXTI_LINE_19
- * @arg @ref LL_EXTI_LINE_20
- * @arg @ref LL_EXTI_LINE_21
- * @arg @ref LL_EXTI_LINE_22
- * @arg @ref LL_EXTI_LINE_29
- * @arg @ref LL_EXTI_LINE_30
- * @arg @ref LL_EXTI_LINE_31
- * @note Please check each device line mapping for EXTI Line availability
- * @retval None
- */
-__STATIC_INLINE void LL_EXTI_GenerateSWI_0_31(uint32_t ExtiLine)
-{
- SET_BIT(EXTI->SWIER, ExtiLine);
-}
-
-
-/**
- * @}
- */
-
-/** @defgroup EXTI_LL_EF_Flag_Management Flag_Management
- * @{
- */
-
-/**
- * @brief Check if the ExtLine Flag is set or not for Lines in range 0 to 31
- * @note This bit is set when the selected edge event arrives on the interrupt
- * line. This bit is cleared by writing a 1 to the bit.
- * @rmtoll PR PIFx LL_EXTI_IsActiveFlag_0_31
- * @param ExtiLine This parameter can be a combination of the following values:
- * @arg @ref LL_EXTI_LINE_0
- * @arg @ref LL_EXTI_LINE_1
- * @arg @ref LL_EXTI_LINE_2
- * @arg @ref LL_EXTI_LINE_3
- * @arg @ref LL_EXTI_LINE_4
- * @arg @ref LL_EXTI_LINE_5
- * @arg @ref LL_EXTI_LINE_6
- * @arg @ref LL_EXTI_LINE_7
- * @arg @ref LL_EXTI_LINE_8
- * @arg @ref LL_EXTI_LINE_9
- * @arg @ref LL_EXTI_LINE_10
- * @arg @ref LL_EXTI_LINE_11
- * @arg @ref LL_EXTI_LINE_12
- * @arg @ref LL_EXTI_LINE_13
- * @arg @ref LL_EXTI_LINE_14
- * @arg @ref LL_EXTI_LINE_15
- * @arg @ref LL_EXTI_LINE_16
- * @arg @ref LL_EXTI_LINE_18
- * @arg @ref LL_EXTI_LINE_19
- * @arg @ref LL_EXTI_LINE_20
- * @arg @ref LL_EXTI_LINE_21
- * @arg @ref LL_EXTI_LINE_22
- * @arg @ref LL_EXTI_LINE_29
- * @arg @ref LL_EXTI_LINE_30
- * @arg @ref LL_EXTI_LINE_31
- * @note Please check each device line mapping for EXTI Line availability
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_0_31(uint32_t ExtiLine)
-{
- return (READ_BIT(EXTI->PR, ExtiLine) == (ExtiLine));
-}
-
-
-/**
- * @brief Read ExtLine Combination Flag for Lines in range 0 to 31
- * @note This bit is set when the selected edge event arrives on the interrupt
- * line. This bit is cleared by writing a 1 to the bit.
- * @rmtoll PR PIFx LL_EXTI_ReadFlag_0_31
- * @param ExtiLine This parameter can be a combination of the following values:
- * @arg @ref LL_EXTI_LINE_0
- * @arg @ref LL_EXTI_LINE_1
- * @arg @ref LL_EXTI_LINE_2
- * @arg @ref LL_EXTI_LINE_3
- * @arg @ref LL_EXTI_LINE_4
- * @arg @ref LL_EXTI_LINE_5
- * @arg @ref LL_EXTI_LINE_6
- * @arg @ref LL_EXTI_LINE_7
- * @arg @ref LL_EXTI_LINE_8
- * @arg @ref LL_EXTI_LINE_9
- * @arg @ref LL_EXTI_LINE_10
- * @arg @ref LL_EXTI_LINE_11
- * @arg @ref LL_EXTI_LINE_12
- * @arg @ref LL_EXTI_LINE_13
- * @arg @ref LL_EXTI_LINE_14
- * @arg @ref LL_EXTI_LINE_15
- * @arg @ref LL_EXTI_LINE_16
- * @arg @ref LL_EXTI_LINE_18
- * @arg @ref LL_EXTI_LINE_19
- * @arg @ref LL_EXTI_LINE_20
- * @arg @ref LL_EXTI_LINE_21
- * @arg @ref LL_EXTI_LINE_22
- * @arg @ref LL_EXTI_LINE_29
- * @arg @ref LL_EXTI_LINE_30
- * @arg @ref LL_EXTI_LINE_31
- * @note Please check each device line mapping for EXTI Line availability
- * @retval @note This bit is set when the selected edge event arrives on the interrupt
- */
-__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_0_31(uint32_t ExtiLine)
-{
- return (uint32_t)(READ_BIT(EXTI->PR, ExtiLine));
-}
-
-
-/**
- * @brief Clear ExtLine Flags for Lines in range 0 to 31
- * @note This bit is set when the selected edge event arrives on the interrupt
- * line. This bit is cleared by writing a 1 to the bit.
- * @rmtoll PR PIFx LL_EXTI_ClearFlag_0_31
- * @param ExtiLine This parameter can be a combination of the following values:
- * @arg @ref LL_EXTI_LINE_0
- * @arg @ref LL_EXTI_LINE_1
- * @arg @ref LL_EXTI_LINE_2
- * @arg @ref LL_EXTI_LINE_3
- * @arg @ref LL_EXTI_LINE_4
- * @arg @ref LL_EXTI_LINE_5
- * @arg @ref LL_EXTI_LINE_6
- * @arg @ref LL_EXTI_LINE_7
- * @arg @ref LL_EXTI_LINE_8
- * @arg @ref LL_EXTI_LINE_9
- * @arg @ref LL_EXTI_LINE_10
- * @arg @ref LL_EXTI_LINE_11
- * @arg @ref LL_EXTI_LINE_12
- * @arg @ref LL_EXTI_LINE_13
- * @arg @ref LL_EXTI_LINE_14
- * @arg @ref LL_EXTI_LINE_15
- * @arg @ref LL_EXTI_LINE_16
- * @arg @ref LL_EXTI_LINE_18
- * @arg @ref LL_EXTI_LINE_19
- * @arg @ref LL_EXTI_LINE_20
- * @arg @ref LL_EXTI_LINE_21
- * @arg @ref LL_EXTI_LINE_22
- * @arg @ref LL_EXTI_LINE_29
- * @arg @ref LL_EXTI_LINE_30
- * @arg @ref LL_EXTI_LINE_31
- * @note Please check each device line mapping for EXTI Line availability
- * @retval None
- */
-__STATIC_INLINE void LL_EXTI_ClearFlag_0_31(uint32_t ExtiLine)
-{
- WRITE_REG(EXTI->PR, ExtiLine);
-}
-
-
-/**
- * @}
- */
-
-#if defined(USE_FULL_LL_DRIVER)
-/** @defgroup EXTI_LL_EF_Init Initialization and de-initialization functions
- * @{
- */
-
-uint32_t LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct);
-uint32_t LL_EXTI_DeInit(void);
-void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct);
-
-
-/**
- * @}
- */
-#endif /* USE_FULL_LL_DRIVER */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* EXTI */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F0xx_LL_EXTI_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|