diff options
Diffstat (limited to 'fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_crs.h')
| -rw-r--r-- | fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_crs.h | 783 |
1 files changed, 0 insertions, 783 deletions
diff --git a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_crs.h b/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_crs.h deleted file mode 100644 index 0781698..0000000 --- a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_crs.h +++ /dev/null @@ -1,783 +0,0 @@ -/**
- ******************************************************************************
- * @file stm32f0xx_ll_crs.h
- * @author MCD Application Team
- * @brief Header file of CRS LL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F0xx_LL_CRS_H
-#define __STM32F0xx_LL_CRS_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx.h"
-
-/** @addtogroup STM32F0xx_LL_Driver
- * @{
- */
-
-#if defined(CRS)
-
-/** @defgroup CRS_LL CRS
- * @{
- */
-
-/* Private types -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private constants ---------------------------------------------------------*/
-/* Private macros ------------------------------------------------------------*/
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup CRS_LL_Exported_Constants CRS Exported Constants
- * @{
- */
-
-/** @defgroup CRS_LL_EC_GET_FLAG Get Flags Defines
- * @brief Flags defines which can be used with LL_CRS_ReadReg function
- * @{
- */
-#define LL_CRS_ISR_SYNCOKF CRS_ISR_SYNCOKF
-#define LL_CRS_ISR_SYNCWARNF CRS_ISR_SYNCWARNF
-#define LL_CRS_ISR_ERRF CRS_ISR_ERRF
-#define LL_CRS_ISR_ESYNCF CRS_ISR_ESYNCF
-#define LL_CRS_ISR_SYNCERR CRS_ISR_SYNCERR
-#define LL_CRS_ISR_SYNCMISS CRS_ISR_SYNCMISS
-#define LL_CRS_ISR_TRIMOVF CRS_ISR_TRIMOVF
-/**
- * @}
- */
-
-/** @defgroup CRS_LL_EC_IT IT Defines
- * @brief IT defines which can be used with LL_CRS_ReadReg and LL_CRS_WriteReg functions
- * @{
- */
-#define LL_CRS_CR_SYNCOKIE CRS_CR_SYNCOKIE
-#define LL_CRS_CR_SYNCWARNIE CRS_CR_SYNCWARNIE
-#define LL_CRS_CR_ERRIE CRS_CR_ERRIE
-#define LL_CRS_CR_ESYNCIE CRS_CR_ESYNCIE
-/**
- * @}
- */
-
-/** @defgroup CRS_LL_EC_SYNC_DIV Synchronization Signal Divider
- * @{
- */
-#define LL_CRS_SYNC_DIV_1 ((uint32_t)0x00U) /*!< Synchro Signal not divided (default) */
-#define LL_CRS_SYNC_DIV_2 CRS_CFGR_SYNCDIV_0 /*!< Synchro Signal divided by 2 */
-#define LL_CRS_SYNC_DIV_4 CRS_CFGR_SYNCDIV_1 /*!< Synchro Signal divided by 4 */
-#define LL_CRS_SYNC_DIV_8 (CRS_CFGR_SYNCDIV_1 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 8 */
-#define LL_CRS_SYNC_DIV_16 CRS_CFGR_SYNCDIV_2 /*!< Synchro Signal divided by 16 */
-#define LL_CRS_SYNC_DIV_32 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 32 */
-#define LL_CRS_SYNC_DIV_64 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_1) /*!< Synchro Signal divided by 64 */
-#define LL_CRS_SYNC_DIV_128 CRS_CFGR_SYNCDIV /*!< Synchro Signal divided by 128 */
-/**
- * @}
- */
-
-/** @defgroup CRS_LL_EC_SYNC_SOURCE Synchronization Signal Source
- * @{
- */
-#define LL_CRS_SYNC_SOURCE_GPIO ((uint32_t)0x00U) /*!< Synchro Signal soucre GPIO */
-#define LL_CRS_SYNC_SOURCE_LSE CRS_CFGR_SYNCSRC_0 /*!< Synchro Signal source LSE */
-#define LL_CRS_SYNC_SOURCE_USB CRS_CFGR_SYNCSRC_1 /*!< Synchro Signal source USB SOF (default)*/
-/**
- * @}
- */
-
-/** @defgroup CRS_LL_EC_SYNC_POLARITY Synchronization Signal Polarity
- * @{
- */
-#define LL_CRS_SYNC_POLARITY_RISING ((uint32_t)0x00U) /*!< Synchro Active on rising edge (default) */
-#define LL_CRS_SYNC_POLARITY_FALLING CRS_CFGR_SYNCPOL /*!< Synchro Active on falling edge */
-/**
- * @}
- */
-
-/** @defgroup CRS_LL_EC_FREQERRORDIR Frequency Error Direction
- * @{
- */
-#define LL_CRS_FREQ_ERROR_DIR_UP ((uint32_t)0x00U) /*!< Upcounting direction, the actual frequency is above the target */
-#define LL_CRS_FREQ_ERROR_DIR_DOWN ((uint32_t)CRS_ISR_FEDIR) /*!< Downcounting direction, the actual frequency is below the target */
-/**
- * @}
- */
-
-/** @defgroup CRS_LL_EC_DEFAULTVALUES Default Values
- * @{
- */
-/**
- * @brief Reset value of the RELOAD field
- * @note The reset value of the RELOAD field corresponds to a target frequency of 48 MHz
- * and a synchronization signal frequency of 1 kHz (SOF signal from USB)
- */
-#define LL_CRS_RELOADVALUE_DEFAULT ((uint32_t)0xBB7FU)
-
-/**
- * @brief Reset value of Frequency error limit.
- */
-#define LL_CRS_ERRORLIMIT_DEFAULT ((uint32_t)0x22U)
-
-/**
- * @brief Reset value of the HSI48 Calibration field
- * @note The default value is 32, which corresponds to the middle of the trimming interval.
- * The trimming step is around 67 kHz between two consecutive TRIM steps.
- * A higher TRIM value corresponds to a higher output frequency
- */
-#define LL_CRS_HSI48CALIBRATION_DEFAULT ((uint32_t)0x20U)
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported macro ------------------------------------------------------------*/
-/** @defgroup CRS_LL_Exported_Macros CRS Exported Macros
- * @{
- */
-
-/** @defgroup CRS_LL_EM_WRITE_READ Common Write and read registers Macros
- * @{
- */
-
-/**
- * @brief Write a value in CRS register
- * @param __INSTANCE__ CRS Instance
- * @param __REG__ Register to be written
- * @param __VALUE__ Value to be written in the register
- * @retval None
- */
-#define LL_CRS_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
-
-/**
- * @brief Read a value in CRS register
- * @param __INSTANCE__ CRS Instance
- * @param __REG__ Register to be read
- * @retval Register value
- */
-#define LL_CRS_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
-/**
- * @}
- */
-
-/** @defgroup CRS_LL_EM_Exported_Macros_Calculate_Reload Exported_Macros_Calculate_Reload
- * @{
- */
-
-/**
- * @brief Macro to calculate reload value to be set in CRS register according to target and sync frequencies
- * @note The RELOAD value should be selected according to the ratio between
- * the target frequency and the frequency of the synchronization source after
- * prescaling. It is then decreased by one in order to reach the expected
- * synchronization on the zero value. The formula is the following:
- * RELOAD = (fTARGET / fSYNC) -1
- * @param __FTARGET__ Target frequency (value in Hz)
- * @param __FSYNC__ Synchronization signal frequency (value in Hz)
- * @retval Reload value (in Hz)
- */
-#define __LL_CRS_CALC_CALCULATE_RELOADVALUE(__FTARGET__, __FSYNC__) (((__FTARGET__) / (__FSYNC__)) - 1U)
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup CRS_LL_Exported_Functions CRS Exported Functions
- * @{
- */
-
-/** @defgroup CRS_LL_EF_Configuration Configuration
- * @{
- */
-
-/**
- * @brief Enable Frequency error counter
- * @note When this bit is set, the CRS_CFGR register is write-protected and cannot be modified
- * @rmtoll CR CEN LL_CRS_EnableFreqErrorCounter
- * @retval None
- */
-__STATIC_INLINE void LL_CRS_EnableFreqErrorCounter(void)
-{
- SET_BIT(CRS->CR, CRS_CR_CEN);
-}
-
-/**
- * @brief Disable Frequency error counter
- * @rmtoll CR CEN LL_CRS_DisableFreqErrorCounter
- * @retval None
- */
-__STATIC_INLINE void LL_CRS_DisableFreqErrorCounter(void)
-{
- CLEAR_BIT(CRS->CR, CRS_CR_CEN);
-}
-
-/**
- * @brief Check if Frequency error counter is enabled or not
- * @rmtoll CR CEN LL_CRS_IsEnabledFreqErrorCounter
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_CRS_IsEnabledFreqErrorCounter(void)
-{
- return (READ_BIT(CRS->CR, CRS_CR_CEN) == (CRS_CR_CEN));
-}
-
-/**
- * @brief Enable Automatic trimming counter
- * @rmtoll CR AUTOTRIMEN LL_CRS_EnableAutoTrimming
- * @retval None
- */
-__STATIC_INLINE void LL_CRS_EnableAutoTrimming(void)
-{
- SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN);
-}
-
-/**
- * @brief Disable Automatic trimming counter
- * @rmtoll CR AUTOTRIMEN LL_CRS_DisableAutoTrimming
- * @retval None
- */
-__STATIC_INLINE void LL_CRS_DisableAutoTrimming(void)
-{
- CLEAR_BIT(CRS->CR, CRS_CR_AUTOTRIMEN);
-}
-
-/**
- * @brief Check if Automatic trimming is enabled or not
- * @rmtoll CR AUTOTRIMEN LL_CRS_IsEnabledAutoTrimming
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_CRS_IsEnabledAutoTrimming(void)
-{
- return (READ_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) == (CRS_CR_AUTOTRIMEN));
-}
-
-/**
- * @brief Set HSI48 oscillator smooth trimming
- * @note When the AUTOTRIMEN bit is set, this field is controlled by hardware and is read-only
- * @rmtoll CR TRIM LL_CRS_SetHSI48SmoothTrimming
- * @param Value a number between Min_Data = 0 and Max_Data = 63
- * @note Default value can be set thanks to @ref LL_CRS_HSI48CALIBRATION_DEFAULT
- * @retval None
- */
-__STATIC_INLINE void LL_CRS_SetHSI48SmoothTrimming(uint32_t Value)
-{
- MODIFY_REG(CRS->CR, CRS_CR_TRIM, Value << CRS_CR_TRIM_Pos);
-}
-
-/**
- * @brief Get HSI48 oscillator smooth trimming
- * @rmtoll CR TRIM LL_CRS_GetHSI48SmoothTrimming
- * @retval a number between Min_Data = 0 and Max_Data = 63
- */
-__STATIC_INLINE uint32_t LL_CRS_GetHSI48SmoothTrimming(void)
-{
- return (uint32_t)(READ_BIT(CRS->CR, CRS_CR_TRIM) >> CRS_CR_TRIM_Pos);
-}
-
-/**
- * @brief Set counter reload value
- * @rmtoll CFGR RELOAD LL_CRS_SetReloadCounter
- * @param Value a number between Min_Data = 0 and Max_Data = 0xFFFF
- * @note Default value can be set thanks to @ref LL_CRS_RELOADVALUE_DEFAULT
- * Otherwise it can be calculated in using macro @ref __LL_CRS_CALC_CALCULATE_RELOADVALUE (_FTARGET_, _FSYNC_)
- * @retval None
- */
-__STATIC_INLINE void LL_CRS_SetReloadCounter(uint32_t Value)
-{
- MODIFY_REG(CRS->CFGR, CRS_CFGR_RELOAD, Value);
-}
-
-/**
- * @brief Get counter reload value
- * @rmtoll CFGR RELOAD LL_CRS_GetReloadCounter
- * @retval a number between Min_Data = 0 and Max_Data = 0xFFFF
- */
-__STATIC_INLINE uint32_t LL_CRS_GetReloadCounter(void)
-{
- return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_RELOAD));
-}
-
-/**
- * @brief Set frequency error limit
- * @rmtoll CFGR FELIM LL_CRS_SetFreqErrorLimit
- * @param Value a number between Min_Data = 0 and Max_Data = 255
- * @note Default value can be set thanks to @ref LL_CRS_ERRORLIMIT_DEFAULT
- * @retval None
- */
-__STATIC_INLINE void LL_CRS_SetFreqErrorLimit(uint32_t Value)
-{
- MODIFY_REG(CRS->CFGR, CRS_CFGR_FELIM, Value << CRS_CFGR_FELIM_Pos);
-}
-
-/**
- * @brief Get frequency error limit
- * @rmtoll CFGR FELIM LL_CRS_GetFreqErrorLimit
- * @retval A number between Min_Data = 0 and Max_Data = 255
- */
-__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorLimit(void)
-{
- return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_FELIM) >> CRS_CFGR_FELIM_Pos);
-}
-
-/**
- * @brief Set division factor for SYNC signal
- * @rmtoll CFGR SYNCDIV LL_CRS_SetSyncDivider
- * @param Divider This parameter can be one of the following values:
- * @arg @ref LL_CRS_SYNC_DIV_1
- * @arg @ref LL_CRS_SYNC_DIV_2
- * @arg @ref LL_CRS_SYNC_DIV_4
- * @arg @ref LL_CRS_SYNC_DIV_8
- * @arg @ref LL_CRS_SYNC_DIV_16
- * @arg @ref LL_CRS_SYNC_DIV_32
- * @arg @ref LL_CRS_SYNC_DIV_64
- * @arg @ref LL_CRS_SYNC_DIV_128
- * @retval None
- */
-__STATIC_INLINE void LL_CRS_SetSyncDivider(uint32_t Divider)
-{
- MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCDIV, Divider);
-}
-
-/**
- * @brief Get division factor for SYNC signal
- * @rmtoll CFGR SYNCDIV LL_CRS_GetSyncDivider
- * @retval Returned value can be one of the following values:
- * @arg @ref LL_CRS_SYNC_DIV_1
- * @arg @ref LL_CRS_SYNC_DIV_2
- * @arg @ref LL_CRS_SYNC_DIV_4
- * @arg @ref LL_CRS_SYNC_DIV_8
- * @arg @ref LL_CRS_SYNC_DIV_16
- * @arg @ref LL_CRS_SYNC_DIV_32
- * @arg @ref LL_CRS_SYNC_DIV_64
- * @arg @ref LL_CRS_SYNC_DIV_128
- */
-__STATIC_INLINE uint32_t LL_CRS_GetSyncDivider(void)
-{
- return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCDIV));
-}
-
-/**
- * @brief Set SYNC signal source
- * @rmtoll CFGR SYNCSRC LL_CRS_SetSyncSignalSource
- * @param Source This parameter can be one of the following values:
- * @arg @ref LL_CRS_SYNC_SOURCE_GPIO
- * @arg @ref LL_CRS_SYNC_SOURCE_LSE
- * @arg @ref LL_CRS_SYNC_SOURCE_USB
- * @retval None
- */
-__STATIC_INLINE void LL_CRS_SetSyncSignalSource(uint32_t Source)
-{
- MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCSRC, Source);
-}
-
-/**
- * @brief Get SYNC signal source
- * @rmtoll CFGR SYNCSRC LL_CRS_GetSyncSignalSource
- * @retval Returned value can be one of the following values:
- * @arg @ref LL_CRS_SYNC_SOURCE_GPIO
- * @arg @ref LL_CRS_SYNC_SOURCE_LSE
- * @arg @ref LL_CRS_SYNC_SOURCE_USB
- */
-__STATIC_INLINE uint32_t LL_CRS_GetSyncSignalSource(void)
-{
- return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCSRC));
-}
-
-/**
- * @brief Set input polarity for the SYNC signal source
- * @rmtoll CFGR SYNCPOL LL_CRS_SetSyncPolarity
- * @param Polarity This parameter can be one of the following values:
- * @arg @ref LL_CRS_SYNC_POLARITY_RISING
- * @arg @ref LL_CRS_SYNC_POLARITY_FALLING
- * @retval None
- */
-__STATIC_INLINE void LL_CRS_SetSyncPolarity(uint32_t Polarity)
-{
- MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCPOL, Polarity);
-}
-
-/**
- * @brief Get input polarity for the SYNC signal source
- * @rmtoll CFGR SYNCPOL LL_CRS_GetSyncPolarity
- * @retval Returned value can be one of the following values:
- * @arg @ref LL_CRS_SYNC_POLARITY_RISING
- * @arg @ref LL_CRS_SYNC_POLARITY_FALLING
- */
-__STATIC_INLINE uint32_t LL_CRS_GetSyncPolarity(void)
-{
- return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCPOL));
-}
-
-/**
- * @brief Configure CRS for the synchronization
- * @rmtoll CR TRIM LL_CRS_ConfigSynchronization\n
- * CFGR RELOAD LL_CRS_ConfigSynchronization\n
- * CFGR FELIM LL_CRS_ConfigSynchronization\n
- * CFGR SYNCDIV LL_CRS_ConfigSynchronization\n
- * CFGR SYNCSRC LL_CRS_ConfigSynchronization\n
- * CFGR SYNCPOL LL_CRS_ConfigSynchronization
- * @param HSI48CalibrationValue a number between Min_Data = 0 and Max_Data = 63
- * @param ErrorLimitValue a number between Min_Data = 0 and Max_Data = 0xFFFF
- * @param ReloadValue a number between Min_Data = 0 and Max_Data = 255
- * @param Settings This parameter can be a combination of the following values:
- * @arg @ref LL_CRS_SYNC_DIV_1 or @ref LL_CRS_SYNC_DIV_2 or @ref LL_CRS_SYNC_DIV_4 or @ref LL_CRS_SYNC_DIV_8
- * or @ref LL_CRS_SYNC_DIV_16 or @ref LL_CRS_SYNC_DIV_32 or @ref LL_CRS_SYNC_DIV_64 or @ref LL_CRS_SYNC_DIV_128
- * @arg @ref LL_CRS_SYNC_SOURCE_GPIO or @ref LL_CRS_SYNC_SOURCE_LSE or @ref LL_CRS_SYNC_SOURCE_USB
- * @arg @ref LL_CRS_SYNC_POLARITY_RISING or @ref LL_CRS_SYNC_POLARITY_FALLING
- * @retval None
- */
-__STATIC_INLINE void LL_CRS_ConfigSynchronization(uint32_t HSI48CalibrationValue, uint32_t ErrorLimitValue, uint32_t ReloadValue, uint32_t Settings)
-{
- MODIFY_REG(CRS->CR, CRS_CR_TRIM, HSI48CalibrationValue << CRS_CR_TRIM_Pos);
- MODIFY_REG(CRS->CFGR,
- CRS_CFGR_RELOAD | CRS_CFGR_FELIM | CRS_CFGR_SYNCDIV | CRS_CFGR_SYNCSRC | CRS_CFGR_SYNCPOL,
- ReloadValue | (ErrorLimitValue << CRS_CFGR_FELIM_Pos) | Settings);
-}
-
-/**
- * @}
- */
-
-/** @defgroup CRS_LL_EF_CRS_Management CRS_Management
- * @{
- */
-
-/**
- * @brief Generate software SYNC event
- * @rmtoll CR SWSYNC LL_CRS_GenerateEvent_SWSYNC
- * @retval None
- */
-__STATIC_INLINE void LL_CRS_GenerateEvent_SWSYNC(void)
-{
- SET_BIT(CRS->CR, CRS_CR_SWSYNC);
-}
-
-/**
- * @brief Get the frequency error direction latched in the time of the last
- * SYNC event
- * @rmtoll ISR FEDIR LL_CRS_GetFreqErrorDirection
- * @retval Returned value can be one of the following values:
- * @arg @ref LL_CRS_FREQ_ERROR_DIR_UP
- * @arg @ref LL_CRS_FREQ_ERROR_DIR_DOWN
- */
-__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorDirection(void)
-{
- return (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FEDIR));
-}
-
-/**
- * @brief Get the frequency error counter value latched in the time of the last SYNC event
- * @rmtoll ISR FECAP LL_CRS_GetFreqErrorCapture
- * @retval A number between Min_Data = 0x0000 and Max_Data = 0xFFFF
- */
-__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorCapture(void)
-{
- return (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FECAP) >> CRS_ISR_FECAP_Pos);
-}
-
-/**
- * @}
- */
-
-/** @defgroup CRS_LL_EF_FLAG_Management FLAG_Management
- * @{
- */
-
-/**
- * @brief Check if SYNC event OK signal occurred or not
- * @rmtoll ISR SYNCOKF LL_CRS_IsActiveFlag_SYNCOK
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCOK(void)
-{
- return (READ_BIT(CRS->ISR, CRS_ISR_SYNCOKF) == (CRS_ISR_SYNCOKF));
-}
-
-/**
- * @brief Check if SYNC warning signal occurred or not
- * @rmtoll ISR SYNCWARNF LL_CRS_IsActiveFlag_SYNCWARN
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCWARN(void)
-{
- return (READ_BIT(CRS->ISR, CRS_ISR_SYNCWARNF) == (CRS_ISR_SYNCWARNF));
-}
-
-/**
- * @brief Check if Synchronization or trimming error signal occurred or not
- * @rmtoll ISR ERRF LL_CRS_IsActiveFlag_ERR
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_ERR(void)
-{
- return (READ_BIT(CRS->ISR, CRS_ISR_ERRF) == (CRS_ISR_ERRF));
-}
-
-/**
- * @brief Check if Expected SYNC signal occurred or not
- * @rmtoll ISR ESYNCF LL_CRS_IsActiveFlag_ESYNC
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_ESYNC(void)
-{
- return (READ_BIT(CRS->ISR, CRS_ISR_ESYNCF) == (CRS_ISR_ESYNCF));
-}
-
-/**
- * @brief Check if SYNC error signal occurred or not
- * @rmtoll ISR SYNCERR LL_CRS_IsActiveFlag_SYNCERR
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCERR(void)
-{
- return (READ_BIT(CRS->ISR, CRS_ISR_SYNCERR) == (CRS_ISR_SYNCERR));
-}
-
-/**
- * @brief Check if SYNC missed error signal occurred or not
- * @rmtoll ISR SYNCMISS LL_CRS_IsActiveFlag_SYNCMISS
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCMISS(void)
-{
- return (READ_BIT(CRS->ISR, CRS_ISR_SYNCMISS) == (CRS_ISR_SYNCMISS));
-}
-
-/**
- * @brief Check if Trimming overflow or underflow occurred or not
- * @rmtoll ISR TRIMOVF LL_CRS_IsActiveFlag_TRIMOVF
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_TRIMOVF(void)
-{
- return (READ_BIT(CRS->ISR, CRS_ISR_TRIMOVF) == (CRS_ISR_TRIMOVF));
-}
-
-/**
- * @brief Clear the SYNC event OK flag
- * @rmtoll ICR SYNCOKC LL_CRS_ClearFlag_SYNCOK
- * @retval None
- */
-__STATIC_INLINE void LL_CRS_ClearFlag_SYNCOK(void)
-{
- WRITE_REG(CRS->ICR, CRS_ICR_SYNCOKC);
-}
-
-/**
- * @brief Clear the SYNC warning flag
- * @rmtoll ICR SYNCWARNC LL_CRS_ClearFlag_SYNCWARN
- * @retval None
- */
-__STATIC_INLINE void LL_CRS_ClearFlag_SYNCWARN(void)
-{
- WRITE_REG(CRS->ICR, CRS_ICR_SYNCWARNC);
-}
-
-/**
- * @brief Clear TRIMOVF, SYNCMISS and SYNCERR bits and consequently also
- * the ERR flag
- * @rmtoll ICR ERRC LL_CRS_ClearFlag_ERR
- * @retval None
- */
-__STATIC_INLINE void LL_CRS_ClearFlag_ERR(void)
-{
- WRITE_REG(CRS->ICR, CRS_ICR_ERRC);
-}
-
-/**
- * @brief Clear Expected SYNC flag
- * @rmtoll ICR ESYNCC LL_CRS_ClearFlag_ESYNC
- * @retval None
- */
-__STATIC_INLINE void LL_CRS_ClearFlag_ESYNC(void)
-{
- WRITE_REG(CRS->ICR, CRS_ICR_ESYNCC);
-}
-
-/**
- * @}
- */
-
-/** @defgroup CRS_LL_EF_IT_Management IT_Management
- * @{
- */
-
-/**
- * @brief Enable SYNC event OK interrupt
- * @rmtoll CR SYNCOKIE LL_CRS_EnableIT_SYNCOK
- * @retval None
- */
-__STATIC_INLINE void LL_CRS_EnableIT_SYNCOK(void)
-{
- SET_BIT(CRS->CR, CRS_CR_SYNCOKIE);
-}
-
-/**
- * @brief Disable SYNC event OK interrupt
- * @rmtoll CR SYNCOKIE LL_CRS_DisableIT_SYNCOK
- * @retval None
- */
-__STATIC_INLINE void LL_CRS_DisableIT_SYNCOK(void)
-{
- CLEAR_BIT(CRS->CR, CRS_CR_SYNCOKIE);
-}
-
-/**
- * @brief Check if SYNC event OK interrupt is enabled or not
- * @rmtoll CR SYNCOKIE LL_CRS_IsEnabledIT_SYNCOK
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_SYNCOK(void)
-{
- return (READ_BIT(CRS->CR, CRS_CR_SYNCOKIE) == (CRS_CR_SYNCOKIE));
-}
-
-/**
- * @brief Enable SYNC warning interrupt
- * @rmtoll CR SYNCWARNIE LL_CRS_EnableIT_SYNCWARN
- * @retval None
- */
-__STATIC_INLINE void LL_CRS_EnableIT_SYNCWARN(void)
-{
- SET_BIT(CRS->CR, CRS_CR_SYNCWARNIE);
-}
-
-/**
- * @brief Disable SYNC warning interrupt
- * @rmtoll CR SYNCWARNIE LL_CRS_DisableIT_SYNCWARN
- * @retval None
- */
-__STATIC_INLINE void LL_CRS_DisableIT_SYNCWARN(void)
-{
- CLEAR_BIT(CRS->CR, CRS_CR_SYNCWARNIE);
-}
-
-/**
- * @brief Check if SYNC warning interrupt is enabled or not
- * @rmtoll CR SYNCWARNIE LL_CRS_IsEnabledIT_SYNCWARN
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_SYNCWARN(void)
-{
- return (READ_BIT(CRS->CR, CRS_CR_SYNCWARNIE) == (CRS_CR_SYNCWARNIE));
-}
-
-/**
- * @brief Enable Synchronization or trimming error interrupt
- * @rmtoll CR ERRIE LL_CRS_EnableIT_ERR
- * @retval None
- */
-__STATIC_INLINE void LL_CRS_EnableIT_ERR(void)
-{
- SET_BIT(CRS->CR, CRS_CR_ERRIE);
-}
-
-/**
- * @brief Disable Synchronization or trimming error interrupt
- * @rmtoll CR ERRIE LL_CRS_DisableIT_ERR
- * @retval None
- */
-__STATIC_INLINE void LL_CRS_DisableIT_ERR(void)
-{
- CLEAR_BIT(CRS->CR, CRS_CR_ERRIE);
-}
-
-/**
- * @brief Check if Synchronization or trimming error interrupt is enabled or not
- * @rmtoll CR ERRIE LL_CRS_IsEnabledIT_ERR
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_ERR(void)
-{
- return (READ_BIT(CRS->CR, CRS_CR_ERRIE) == (CRS_CR_ERRIE));
-}
-
-/**
- * @brief Enable Expected SYNC interrupt
- * @rmtoll CR ESYNCIE LL_CRS_EnableIT_ESYNC
- * @retval None
- */
-__STATIC_INLINE void LL_CRS_EnableIT_ESYNC(void)
-{
- SET_BIT(CRS->CR, CRS_CR_ESYNCIE);
-}
-
-/**
- * @brief Disable Expected SYNC interrupt
- * @rmtoll CR ESYNCIE LL_CRS_DisableIT_ESYNC
- * @retval None
- */
-__STATIC_INLINE void LL_CRS_DisableIT_ESYNC(void)
-{
- CLEAR_BIT(CRS->CR, CRS_CR_ESYNCIE);
-}
-
-/**
- * @brief Check if Expected SYNC interrupt is enabled or not
- * @rmtoll CR ESYNCIE LL_CRS_IsEnabledIT_ESYNC
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_ESYNC(void)
-{
- return (READ_BIT(CRS->CR, CRS_CR_ESYNCIE) == (CRS_CR_ESYNCIE));
-}
-
-/**
- * @}
- */
-
-#if defined(USE_FULL_LL_DRIVER)
-/** @defgroup CRS_LL_EF_Init Initialization and de-initialization functions
- * @{
- */
-
-ErrorStatus LL_CRS_DeInit(void);
-
-/**
- * @}
- */
-#endif /* USE_FULL_LL_DRIVER */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* defined(CRS) */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F0xx_LL_CRS_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|