diff options
Diffstat (limited to 'fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h')
| -rw-r--r-- | fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h | 587 |
1 files changed, 0 insertions, 587 deletions
diff --git a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h b/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h deleted file mode 100644 index 60e8e14..0000000 --- a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h +++ /dev/null @@ -1,587 +0,0 @@ -/**
- ******************************************************************************
- * @file stm32f0xx_hal_uart_ex.h
- * @author MCD Application Team
- * @brief Header file of UART HAL Extended module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef STM32F0xx_HAL_UART_EX_H
-#define STM32F0xx_HAL_UART_EX_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_hal_def.h"
-
-/** @addtogroup STM32F0xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup UARTEx
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup UARTEx_Exported_Types UARTEx Exported Types
- * @{
- */
-
-#if defined(USART_CR1_UESM)
-/**
- * @brief UART wake up from stop mode parameters
- */
-typedef struct
-{
- uint32_t WakeUpEvent; /*!< Specifies which event will activate the Wakeup from Stop mode flag (WUF).
- This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection.
- If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must
- be filled up. */
-
- uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long.
- This parameter can be a value of @ref UARTEx_WakeUp_Address_Length. */
-
- uint8_t Address; /*!< UART/USART node address (7-bit long max). */
-} UART_WakeUpTypeDef;
-
-#endif /* USART_CR1_UESM */
-/**
- * @}
- */
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants
- * @{
- */
-
-/** @defgroup UARTEx_Word_Length UARTEx Word Length
- * @{
- */
-#if defined(USART_CR1_M1)
-#define UART_WORDLENGTH_7B USART_CR1_M1 /*!< 7-bit long UART frame */
-#endif /* USART_CR1_M1 */
-#define UART_WORDLENGTH_8B 0x00000000U /*!< 8-bit long UART frame */
-#if defined (USART_CR1_M0)
-#define UART_WORDLENGTH_9B USART_CR1_M0 /*!< 9-bit long UART frame */
-#else
-#define UART_WORDLENGTH_9B USART_CR1_M /*!< 9-bit long UART frame */
-#endif /* USART_CR1_M0 */
-/**
- * @}
- */
-
-/** @defgroup UARTEx_WakeUp_Address_Length UARTEx WakeUp Address Length
- * @{
- */
-#define UART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit long wake-up address */
-#define UART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit long wake-up address */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported macros -----------------------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup UARTEx_Exported_Functions
- * @{
- */
-
-/** @addtogroup UARTEx_Exported_Functions_Group1
- * @{
- */
-
-/* Initialization and de-initialization functions ****************************/
-HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime,
- uint32_t DeassertionTime);
-
-/**
- * @}
- */
-
-/** @addtogroup UARTEx_Exported_Functions_Group2
- * @{
- */
-
-#if defined(USART_CR1_UESM)
-void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart);
-
-#endif /* USART_CR1_UESM */
-
-/**
- * @}
- */
-
-/** @addtogroup UARTEx_Exported_Functions_Group3
- * @{
- */
-
-/* Peripheral Control functions **********************************************/
-#if defined(USART_CR1_UESM)
-HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
-HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart);
-HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart);
-
-#endif/* USART_CR1_UESM */
-HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength);
-
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Private macros ------------------------------------------------------------*/
-/** @defgroup UARTEx_Private_Macros UARTEx Private Macros
- * @{
- */
-
-/** @brief Report the UART clock source.
- * @param __HANDLE__ specifies the UART Handle.
- * @param __CLOCKSOURCE__ output variable.
- * @retval UART clocking source, written in __CLOCKSOURCE__.
- */
-
-#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx)
-#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
- do { \
- switch(__HAL_RCC_GET_USART1_SOURCE()) \
- { \
- case RCC_USART1CLKSOURCE_PCLK1: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
- break; \
- case RCC_USART1CLKSOURCE_HSI: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
- break; \
- case RCC_USART1CLKSOURCE_SYSCLK: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
- break; \
- case RCC_USART1CLKSOURCE_LSE: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
- break; \
- default: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
- break; \
- } \
- } while(0)
-#elif defined (STM32F030x8) || defined (STM32F070x6) || defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F051x8) || defined (STM32F058xx)
-#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
- do { \
- if((__HANDLE__)->Instance == USART1) \
- { \
- switch(__HAL_RCC_GET_USART1_SOURCE()) \
- { \
- case RCC_USART1CLKSOURCE_PCLK1: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
- break; \
- case RCC_USART1CLKSOURCE_HSI: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
- break; \
- case RCC_USART1CLKSOURCE_SYSCLK: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
- break; \
- case RCC_USART1CLKSOURCE_LSE: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
- break; \
- default: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
- break; \
- } \
- } \
- else if((__HANDLE__)->Instance == USART2) \
- { \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
- } \
- else \
- { \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
- } \
- } while(0)
-#elif defined(STM32F070xB)
-#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
- do { \
- if((__HANDLE__)->Instance == USART1) \
- { \
- switch(__HAL_RCC_GET_USART1_SOURCE()) \
- { \
- case RCC_USART1CLKSOURCE_PCLK1: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
- break; \
- case RCC_USART1CLKSOURCE_HSI: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
- break; \
- case RCC_USART1CLKSOURCE_SYSCLK: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
- break; \
- case RCC_USART1CLKSOURCE_LSE: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
- break; \
- default: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
- break; \
- } \
- } \
- else if((__HANDLE__)->Instance == USART2) \
- { \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
- } \
- else if((__HANDLE__)->Instance == USART3) \
- { \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
- } \
- else if((__HANDLE__)->Instance == USART4) \
- { \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
- } \
- else \
- { \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
- } \
- } while(0)
-#elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
-#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
- do { \
- if((__HANDLE__)->Instance == USART1) \
- { \
- switch(__HAL_RCC_GET_USART1_SOURCE()) \
- { \
- case RCC_USART1CLKSOURCE_PCLK1: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
- break; \
- case RCC_USART1CLKSOURCE_HSI: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
- break; \
- case RCC_USART1CLKSOURCE_SYSCLK: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
- break; \
- case RCC_USART1CLKSOURCE_LSE: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
- break; \
- default: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
- break; \
- } \
- } \
- else if((__HANDLE__)->Instance == USART2) \
- { \
- switch(__HAL_RCC_GET_USART2_SOURCE()) \
- { \
- case RCC_USART2CLKSOURCE_PCLK1: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
- break; \
- case RCC_USART2CLKSOURCE_HSI: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
- break; \
- case RCC_USART2CLKSOURCE_SYSCLK: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
- break; \
- case RCC_USART2CLKSOURCE_LSE: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
- break; \
- default: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
- break; \
- } \
- } \
- else if((__HANDLE__)->Instance == USART3) \
- { \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
- } \
- else if((__HANDLE__)->Instance == USART4) \
- { \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
- } \
- else \
- { \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
- } \
- } while(0)
-#elif defined(STM32F091xC) || defined (STM32F098xx)
-#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
- do { \
- if((__HANDLE__)->Instance == USART1) \
- { \
- switch(__HAL_RCC_GET_USART1_SOURCE()) \
- { \
- case RCC_USART1CLKSOURCE_PCLK1: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
- break; \
- case RCC_USART1CLKSOURCE_HSI: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
- break; \
- case RCC_USART1CLKSOURCE_SYSCLK: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
- break; \
- case RCC_USART1CLKSOURCE_LSE: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
- break; \
- default: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
- break; \
- } \
- } \
- else if((__HANDLE__)->Instance == USART2) \
- { \
- switch(__HAL_RCC_GET_USART2_SOURCE()) \
- { \
- case RCC_USART2CLKSOURCE_PCLK1: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
- break; \
- case RCC_USART2CLKSOURCE_HSI: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
- break; \
- case RCC_USART2CLKSOURCE_SYSCLK: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
- break; \
- case RCC_USART2CLKSOURCE_LSE: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
- break; \
- default: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
- break; \
- } \
- } \
- else if((__HANDLE__)->Instance == USART3) \
- { \
- switch(__HAL_RCC_GET_USART3_SOURCE()) \
- { \
- case RCC_USART3CLKSOURCE_PCLK1: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
- break; \
- case RCC_USART3CLKSOURCE_HSI: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
- break; \
- case RCC_USART3CLKSOURCE_SYSCLK: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
- break; \
- case RCC_USART3CLKSOURCE_LSE: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
- break; \
- default: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
- break; \
- } \
- } \
- else if((__HANDLE__)->Instance == USART4) \
- { \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
- } \
- else if((__HANDLE__)->Instance == USART5) \
- { \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
- } \
- else if((__HANDLE__)->Instance == USART6) \
- { \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
- } \
- else if((__HANDLE__)->Instance == USART7) \
- { \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
- } \
- else if((__HANDLE__)->Instance == USART8) \
- { \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
- } \
- else \
- { \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
- } \
- } while(0)
-#elif defined(STM32F030xC)
-#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
- do { \
- if((__HANDLE__)->Instance == USART1) \
- { \
- switch(__HAL_RCC_GET_USART1_SOURCE()) \
- { \
- case RCC_USART1CLKSOURCE_PCLK1: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
- break; \
- case RCC_USART1CLKSOURCE_HSI: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
- break; \
- case RCC_USART1CLKSOURCE_SYSCLK: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
- break; \
- case RCC_USART1CLKSOURCE_LSE: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
- break; \
- default: \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
- break; \
- } \
- } \
- else if((__HANDLE__)->Instance == USART2) \
- { \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
- } \
- else if((__HANDLE__)->Instance == USART3) \
- { \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
- } \
- else if((__HANDLE__)->Instance == USART4) \
- { \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
- } \
- else if((__HANDLE__)->Instance == USART5) \
- { \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
- } \
- else if((__HANDLE__)->Instance == USART6) \
- { \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
- } \
- else \
- { \
- (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
- } \
- } while(0)
-
-#endif /* defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) */
-
-/** @brief Report the UART mask to apply to retrieve the received data
- * according to the word length and to the parity bits activation.
- * @note If PCE = 1, the parity bit is not included in the data extracted
- * by the reception API().
- * This masking operation is not carried out in the case of
- * DMA transfers.
- * @param __HANDLE__ specifies the UART Handle.
- * @retval None, the mask to apply to UART RDR register is stored in (__HANDLE__)->Mask field.
- */
-#if defined (USART_CR1_M1)
-#define UART_MASK_COMPUTATION(__HANDLE__) \
- do { \
- if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \
- { \
- if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
- { \
- (__HANDLE__)->Mask = 0x01FFU ; \
- } \
- else \
- { \
- (__HANDLE__)->Mask = 0x00FFU ; \
- } \
- } \
- else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \
- { \
- if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
- { \
- (__HANDLE__)->Mask = 0x00FFU ; \
- } \
- else \
- { \
- (__HANDLE__)->Mask = 0x007FU ; \
- } \
- } \
- else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \
- { \
- if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
- { \
- (__HANDLE__)->Mask = 0x007FU ; \
- } \
- else \
- { \
- (__HANDLE__)->Mask = 0x003FU ; \
- } \
- } \
- else \
- { \
- (__HANDLE__)->Mask = 0x0000U; \
- } \
- } while(0U)
-
-#else
-#define UART_MASK_COMPUTATION(__HANDLE__) \
- do { \
- if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \
- { \
- if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
- { \
- (__HANDLE__)->Mask = 0x01FFU ; \
- } \
- else \
- { \
- (__HANDLE__)->Mask = 0x00FFU ; \
- } \
- } \
- else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \
- { \
- if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
- { \
- (__HANDLE__)->Mask = 0x00FFU ; \
- } \
- else \
- { \
- (__HANDLE__)->Mask = 0x007FU ; \
- } \
- } \
- else \
- { \
- (__HANDLE__)->Mask = 0x0000U; \
- } \
- } while(0U)
-
-#endif /* USART_CR1_M1 */
-
-/**
- * @brief Ensure that UART frame length is valid.
- * @param __LENGTH__ UART frame length.
- * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid)
- */
-#if defined (USART_CR1_M1)
-#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_7B) || \
- ((__LENGTH__) == UART_WORDLENGTH_8B) || \
- ((__LENGTH__) == UART_WORDLENGTH_9B))
-#else
-#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_8B) || \
- ((__LENGTH__) == UART_WORDLENGTH_9B))
-#endif /* USART_CR1_M1 */
-
-/**
- * @brief Ensure that UART wake-up address length is valid.
- * @param __ADDRESS__ UART wake-up address length.
- * @retval SET (__ADDRESS__ is valid) or RESET (__ADDRESS__ is invalid)
- */
-#define IS_UART_ADDRESSLENGTH_DETECT(__ADDRESS__) (((__ADDRESS__) == UART_ADDRESS_DETECT_4B) || \
- ((__ADDRESS__) == UART_ADDRESS_DETECT_7B))
-
-/**
- * @}
- */
-
-/* Private functions ---------------------------------------------------------*/
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* STM32F0xx_HAL_UART_EX_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|