diff options
Diffstat (limited to 'fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim.h')
| -rw-r--r-- | fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim.h | 2040 |
1 files changed, 0 insertions, 2040 deletions
diff --git a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim.h b/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim.h deleted file mode 100644 index 69cc007..0000000 --- a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim.h +++ /dev/null @@ -1,2040 +0,0 @@ -/**
- ******************************************************************************
- * @file stm32f0xx_hal_tim.h
- * @author MCD Application Team
- * @brief Header file of TIM HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef STM32F0xx_HAL_TIM_H
-#define STM32F0xx_HAL_TIM_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_hal_def.h"
-
-/** @addtogroup STM32F0xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup TIM
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup TIM_Exported_Types TIM Exported Types
- * @{
- */
-
-/**
- * @brief TIM Time base Configuration Structure definition
- */
-typedef struct
-{
- uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock.
- This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
-
- uint32_t CounterMode; /*!< Specifies the counter mode.
- This parameter can be a value of @ref TIM_Counter_Mode */
-
- uint32_t Period; /*!< Specifies the period value to be loaded into the active
- Auto-Reload Register at the next update event.
- This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
-
- uint32_t ClockDivision; /*!< Specifies the clock division.
- This parameter can be a value of @ref TIM_ClockDivision */
-
- uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter
- reaches zero, an update event is generated and counting restarts
- from the RCR value (N).
- This means in PWM mode that (N+1) corresponds to:
- - the number of PWM periods in edge-aligned mode
- - the number of half PWM period in center-aligned mode
- GP timers: this parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.
- Advanced timers: this parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
-
- uint32_t AutoReloadPreload; /*!< Specifies the auto-reload preload.
- This parameter can be a value of @ref TIM_AutoReloadPreload */
-} TIM_Base_InitTypeDef;
-
-/**
- * @brief TIM Output Compare Configuration Structure definition
- */
-typedef struct
-{
- uint32_t OCMode; /*!< Specifies the TIM mode.
- This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
-
- uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
- This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
-
- uint32_t OCPolarity; /*!< Specifies the output polarity.
- This parameter can be a value of @ref TIM_Output_Compare_Polarity */
-
- uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
- This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
- @note This parameter is valid only for timer instances supporting break feature. */
-
- uint32_t OCFastMode; /*!< Specifies the Fast mode state.
- This parameter can be a value of @ref TIM_Output_Fast_State
- @note This parameter is valid only in PWM1 and PWM2 mode. */
-
-
- uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
- This parameter can be a value of @ref TIM_Output_Compare_Idle_State
- @note This parameter is valid only for timer instances supporting break feature. */
-
- uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
- This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
- @note This parameter is valid only for timer instances supporting break feature. */
-} TIM_OC_InitTypeDef;
-
-/**
- * @brief TIM One Pulse Mode Configuration Structure definition
- */
-typedef struct
-{
- uint32_t OCMode; /*!< Specifies the TIM mode.
- This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
-
- uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
- This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
-
- uint32_t OCPolarity; /*!< Specifies the output polarity.
- This parameter can be a value of @ref TIM_Output_Compare_Polarity */
-
- uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
- This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
- @note This parameter is valid only for timer instances supporting break feature. */
-
- uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
- This parameter can be a value of @ref TIM_Output_Compare_Idle_State
- @note This parameter is valid only for timer instances supporting break feature. */
-
- uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
- This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
- @note This parameter is valid only for timer instances supporting break feature. */
-
- uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
- This parameter can be a value of @ref TIM_Input_Capture_Polarity */
-
- uint32_t ICSelection; /*!< Specifies the input.
- This parameter can be a value of @ref TIM_Input_Capture_Selection */
-
- uint32_t ICFilter; /*!< Specifies the input capture filter.
- This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
-} TIM_OnePulse_InitTypeDef;
-
-/**
- * @brief TIM Input Capture Configuration Structure definition
- */
-typedef struct
-{
- uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
- This parameter can be a value of @ref TIM_Input_Capture_Polarity */
-
- uint32_t ICSelection; /*!< Specifies the input.
- This parameter can be a value of @ref TIM_Input_Capture_Selection */
-
- uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler.
- This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
-
- uint32_t ICFilter; /*!< Specifies the input capture filter.
- This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
-} TIM_IC_InitTypeDef;
-
-/**
- * @brief TIM Encoder Configuration Structure definition
- */
-typedef struct
-{
- uint32_t EncoderMode; /*!< Specifies the active edge of the input signal.
- This parameter can be a value of @ref TIM_Encoder_Mode */
-
- uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
- This parameter can be a value of @ref TIM_Encoder_Input_Polarity */
-
- uint32_t IC1Selection; /*!< Specifies the input.
- This parameter can be a value of @ref TIM_Input_Capture_Selection */
-
- uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
- This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
-
- uint32_t IC1Filter; /*!< Specifies the input capture filter.
- This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
-
- uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal.
- This parameter can be a value of @ref TIM_Encoder_Input_Polarity */
-
- uint32_t IC2Selection; /*!< Specifies the input.
- This parameter can be a value of @ref TIM_Input_Capture_Selection */
-
- uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler.
- This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
-
- uint32_t IC2Filter; /*!< Specifies the input capture filter.
- This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
-} TIM_Encoder_InitTypeDef;
-
-/**
- * @brief Clock Configuration Handle Structure definition
- */
-typedef struct
-{
- uint32_t ClockSource; /*!< TIM clock sources
- This parameter can be a value of @ref TIM_Clock_Source */
- uint32_t ClockPolarity; /*!< TIM clock polarity
- This parameter can be a value of @ref TIM_Clock_Polarity */
- uint32_t ClockPrescaler; /*!< TIM clock prescaler
- This parameter can be a value of @ref TIM_Clock_Prescaler */
- uint32_t ClockFilter; /*!< TIM clock filter
- This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
-} TIM_ClockConfigTypeDef;
-
-/**
- * @brief TIM Clear Input Configuration Handle Structure definition
- */
-typedef struct
-{
- uint32_t ClearInputState; /*!< TIM clear Input state
- This parameter can be ENABLE or DISABLE */
- uint32_t ClearInputSource; /*!< TIM clear Input sources
- This parameter can be a value of @ref TIM_ClearInput_Source */
- uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity
- This parameter can be a value of @ref TIM_ClearInput_Polarity */
- uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler
- This parameter must be 0: When OCRef clear feature is used with ETR source, ETR prescaler must be off */
- uint32_t ClearInputFilter; /*!< TIM Clear Input filter
- This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
-} TIM_ClearInputConfigTypeDef;
-
-/**
- * @brief TIM Master configuration Structure definition
- */
-typedef struct
-{
- uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection
- This parameter can be a value of @ref TIM_Master_Mode_Selection */
- uint32_t MasterSlaveMode; /*!< Master/slave mode selection
- This parameter can be a value of @ref TIM_Master_Slave_Mode
- @note When the Master/slave mode is enabled, the effect of
- an event on the trigger input (TRGI) is delayed to allow a
- perfect synchronization between the current timer and its
- slaves (through TRGO). It is not mandatory in case of timer
- synchronization mode. */
-} TIM_MasterConfigTypeDef;
-
-/**
- * @brief TIM Slave configuration Structure definition
- */
-typedef struct
-{
- uint32_t SlaveMode; /*!< Slave mode selection
- This parameter can be a value of @ref TIM_Slave_Mode */
- uint32_t InputTrigger; /*!< Input Trigger source
- This parameter can be a value of @ref TIM_Trigger_Selection */
- uint32_t TriggerPolarity; /*!< Input Trigger polarity
- This parameter can be a value of @ref TIM_Trigger_Polarity */
- uint32_t TriggerPrescaler; /*!< Input trigger prescaler
- This parameter can be a value of @ref TIM_Trigger_Prescaler */
- uint32_t TriggerFilter; /*!< Input trigger filter
- This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
-
-} TIM_SlaveConfigTypeDef;
-
-/**
- * @brief TIM Break input(s) and Dead time configuration Structure definition
- * @note 2 break inputs can be configured (BKIN and BKIN2) with configurable
- * filter and polarity.
- */
-typedef struct
-{
- uint32_t OffStateRunMode; /*!< TIM off state in run mode
- This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
- uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode
- This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
- uint32_t LockLevel; /*!< TIM Lock level
- This parameter can be a value of @ref TIM_Lock_level */
- uint32_t DeadTime; /*!< TIM dead Time
- This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
- uint32_t BreakState; /*!< TIM Break State
- This parameter can be a value of @ref TIM_Break_Input_enable_disable */
- uint32_t BreakPolarity; /*!< TIM Break input polarity
- This parameter can be a value of @ref TIM_Break_Polarity */
- uint32_t BreakFilter; /*!< Specifies the break input filter.
- This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
- uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state
- This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
-} TIM_BreakDeadTimeConfigTypeDef;
-
-/**
- * @brief HAL State structures definition
- */
-typedef enum
-{
- HAL_TIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */
- HAL_TIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
- HAL_TIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */
- HAL_TIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */
- HAL_TIM_STATE_ERROR = 0x04U /*!< Reception process is ongoing */
-} HAL_TIM_StateTypeDef;
-
-/**
- * @brief HAL Active channel structures definition
- */
-typedef enum
-{
- HAL_TIM_ACTIVE_CHANNEL_1 = 0x01U, /*!< The active channel is 1 */
- HAL_TIM_ACTIVE_CHANNEL_2 = 0x02U, /*!< The active channel is 2 */
- HAL_TIM_ACTIVE_CHANNEL_3 = 0x04U, /*!< The active channel is 3 */
- HAL_TIM_ACTIVE_CHANNEL_4 = 0x08U, /*!< The active channel is 4 */
- HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00U /*!< All active channels cleared */
-} HAL_TIM_ActiveChannel;
-
-/**
- * @brief TIM Time Base Handle Structure definition
- */
-#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
-typedef struct __TIM_HandleTypeDef
-#else
-typedef struct
-#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
-{
- TIM_TypeDef *Instance; /*!< Register base address */
- TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */
- HAL_TIM_ActiveChannel Channel; /*!< Active channel */
- DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array
- This array is accessed by a @ref DMA_Handle_index */
- HAL_LockTypeDef Lock; /*!< Locking object */
- __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */
-
-#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
- void (* Base_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp Init Callback */
- void (* Base_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp DeInit Callback */
- void (* IC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp Init Callback */
- void (* IC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp DeInit Callback */
- void (* OC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp Init Callback */
- void (* OC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp DeInit Callback */
- void (* PWM_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp Init Callback */
- void (* PWM_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp DeInit Callback */
- void (* OnePulse_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp Init Callback */
- void (* OnePulse_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp DeInit Callback */
- void (* Encoder_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp Init Callback */
- void (* Encoder_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp DeInit Callback */
- void (* HallSensor_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp Init Callback */
- void (* HallSensor_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp DeInit Callback */
- void (* PeriodElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed Callback */
- void (* PeriodElapsedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed half complete Callback */
- void (* TriggerCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger Callback */
- void (* TriggerHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger half complete Callback */
- void (* IC_CaptureCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture Callback */
- void (* IC_CaptureHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture half complete Callback */
- void (* OC_DelayElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Output Compare Delay Elapsed Callback */
- void (* PWM_PulseFinishedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished Callback */
- void (* PWM_PulseFinishedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished half complete Callback */
- void (* ErrorCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Error Callback */
- void (* CommutationCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation Callback */
- void (* CommutationHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation half complete Callback */
- void (* BreakCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break Callback */
-#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
-} TIM_HandleTypeDef;
-
-#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
-/**
- * @brief HAL TIM Callback ID enumeration definition
- */
-typedef enum
-{
- HAL_TIM_BASE_MSPINIT_CB_ID = 0x00U /*!< TIM Base MspInit Callback ID */
- ,HAL_TIM_BASE_MSPDEINIT_CB_ID = 0x01U /*!< TIM Base MspDeInit Callback ID */
- ,HAL_TIM_IC_MSPINIT_CB_ID = 0x02U /*!< TIM IC MspInit Callback ID */
- ,HAL_TIM_IC_MSPDEINIT_CB_ID = 0x03U /*!< TIM IC MspDeInit Callback ID */
- ,HAL_TIM_OC_MSPINIT_CB_ID = 0x04U /*!< TIM OC MspInit Callback ID */
- ,HAL_TIM_OC_MSPDEINIT_CB_ID = 0x05U /*!< TIM OC MspDeInit Callback ID */
- ,HAL_TIM_PWM_MSPINIT_CB_ID = 0x06U /*!< TIM PWM MspInit Callback ID */
- ,HAL_TIM_PWM_MSPDEINIT_CB_ID = 0x07U /*!< TIM PWM MspDeInit Callback ID */
- ,HAL_TIM_ONE_PULSE_MSPINIT_CB_ID = 0x08U /*!< TIM One Pulse MspInit Callback ID */
- ,HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID = 0x09U /*!< TIM One Pulse MspDeInit Callback ID */
- ,HAL_TIM_ENCODER_MSPINIT_CB_ID = 0x0AU /*!< TIM Encoder MspInit Callback ID */
- ,HAL_TIM_ENCODER_MSPDEINIT_CB_ID = 0x0BU /*!< TIM Encoder MspDeInit Callback ID */
- ,HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID = 0x0CU /*!< TIM Hall Sensor MspDeInit Callback ID */
- ,HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID = 0x0DU /*!< TIM Hall Sensor MspDeInit Callback ID */
- ,HAL_TIM_PERIOD_ELAPSED_CB_ID = 0x0EU /*!< TIM Period Elapsed Callback ID */
- ,HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID = 0x0FU /*!< TIM Period Elapsed half complete Callback ID */
- ,HAL_TIM_TRIGGER_CB_ID = 0x10U /*!< TIM Trigger Callback ID */
- ,HAL_TIM_TRIGGER_HALF_CB_ID = 0x11U /*!< TIM Trigger half complete Callback ID */
-
- ,HAL_TIM_IC_CAPTURE_CB_ID = 0x12U /*!< TIM Input Capture Callback ID */
- ,HAL_TIM_IC_CAPTURE_HALF_CB_ID = 0x13U /*!< TIM Input Capture half complete Callback ID */
- ,HAL_TIM_OC_DELAY_ELAPSED_CB_ID = 0x14U /*!< TIM Output Compare Delay Elapsed Callback ID */
- ,HAL_TIM_PWM_PULSE_FINISHED_CB_ID = 0x15U /*!< TIM PWM Pulse Finished Callback ID */
- ,HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID = 0x16U /*!< TIM PWM Pulse Finished half complete Callback ID */
- ,HAL_TIM_ERROR_CB_ID = 0x17U /*!< TIM Error Callback ID */
- ,HAL_TIM_COMMUTATION_CB_ID = 0x18U /*!< TIM Commutation Callback ID */
- ,HAL_TIM_COMMUTATION_HALF_CB_ID = 0x19U /*!< TIM Commutation half complete Callback ID */
- ,HAL_TIM_BREAK_CB_ID = 0x1AU /*!< TIM Break Callback ID */
-} HAL_TIM_CallbackIDTypeDef;
-
-/**
- * @brief HAL TIM Callback pointer definition
- */
-typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to the TIM callback function */
-
-#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
-
-/**
- * @}
- */
-/* End of exported types -----------------------------------------------------*/
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup TIM_Exported_Constants TIM Exported Constants
- * @{
- */
-
-/** @defgroup TIM_ClearInput_Source TIM Clear Input Source
- * @{
- */
-#define TIM_CLEARINPUTSOURCE_NONE 0x00000000U /*!< OCREF_CLR is disabled */
-#define TIM_CLEARINPUTSOURCE_ETR 0x00000001U /*!< OCREF_CLR is connected to ETRF input */
-#define TIM_CLEARINPUTSOURCE_OCREFCLR 0x00000002U /*!< OCREF_CLR is connected to OCREF_CLR_INT */
-/**
- * @}
- */
-
-/** @defgroup TIM_DMA_Base_address TIM DMA Base Address
- * @{
- */
-#define TIM_DMABASE_CR1 0x00000000U
-#define TIM_DMABASE_CR2 0x00000001U
-#define TIM_DMABASE_SMCR 0x00000002U
-#define TIM_DMABASE_DIER 0x00000003U
-#define TIM_DMABASE_SR 0x00000004U
-#define TIM_DMABASE_EGR 0x00000005U
-#define TIM_DMABASE_CCMR1 0x00000006U
-#define TIM_DMABASE_CCMR2 0x00000007U
-#define TIM_DMABASE_CCER 0x00000008U
-#define TIM_DMABASE_CNT 0x00000009U
-#define TIM_DMABASE_PSC 0x0000000AU
-#define TIM_DMABASE_ARR 0x0000000BU
-#define TIM_DMABASE_RCR 0x0000000CU
-#define TIM_DMABASE_CCR1 0x0000000DU
-#define TIM_DMABASE_CCR2 0x0000000EU
-#define TIM_DMABASE_CCR3 0x0000000FU
-#define TIM_DMABASE_CCR4 0x00000010U
-#define TIM_DMABASE_BDTR 0x00000011U
-#define TIM_DMABASE_DCR 0x00000012U
-#define TIM_DMABASE_DMAR 0x00000013U
-/**
- * @}
- */
-
-/** @defgroup TIM_Event_Source TIM Event Source
- * @{
- */
-#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG /*!< Reinitialize the counter and generates an update of the registers */
-#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G /*!< A capture/compare event is generated on channel 1 */
-#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G /*!< A capture/compare event is generated on channel 2 */
-#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G /*!< A capture/compare event is generated on channel 3 */
-#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G /*!< A capture/compare event is generated on channel 4 */
-#define TIM_EVENTSOURCE_COM TIM_EGR_COMG /*!< A commutation event is generated */
-#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG /*!< A trigger event is generated */
-#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG /*!< A break event is generated */
-/**
- * @}
- */
-
-/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel polarity
- * @{
- */
-#define TIM_INPUTCHANNELPOLARITY_RISING 0x00000000U /*!< Polarity for TIx source */
-#define TIM_INPUTCHANNELPOLARITY_FALLING TIM_CCER_CC1P /*!< Polarity for TIx source */
-#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */
-/**
- * @}
- */
-
-/** @defgroup TIM_ETR_Polarity TIM ETR Polarity
- * @{
- */
-#define TIM_ETRPOLARITY_INVERTED TIM_SMCR_ETP /*!< Polarity for ETR source */
-#define TIM_ETRPOLARITY_NONINVERTED 0x00000000U /*!< Polarity for ETR source */
-/**
- * @}
- */
-
-/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler
- * @{
- */
-#define TIM_ETRPRESCALER_DIV1 0x00000000U /*!< No prescaler is used */
-#define TIM_ETRPRESCALER_DIV2 TIM_SMCR_ETPS_0 /*!< ETR input source is divided by 2 */
-#define TIM_ETRPRESCALER_DIV4 TIM_SMCR_ETPS_1 /*!< ETR input source is divided by 4 */
-#define TIM_ETRPRESCALER_DIV8 TIM_SMCR_ETPS /*!< ETR input source is divided by 8 */
-/**
- * @}
- */
-
-/** @defgroup TIM_Counter_Mode TIM Counter Mode
- * @{
- */
-#define TIM_COUNTERMODE_UP 0x00000000U /*!< Counter used as up-counter */
-#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR /*!< Counter used as down-counter */
-#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0 /*!< Center-aligned mode 1 */
-#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1 /*!< Center-aligned mode 2 */
-#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS /*!< Center-aligned mode 3 */
-/**
- * @}
- */
-
-/** @defgroup TIM_ClockDivision TIM Clock Division
- * @{
- */
-#define TIM_CLOCKDIVISION_DIV1 0x00000000U /*!< Clock division: tDTS=tCK_INT */
-#define TIM_CLOCKDIVISION_DIV2 TIM_CR1_CKD_0 /*!< Clock division: tDTS=2*tCK_INT */
-#define TIM_CLOCKDIVISION_DIV4 TIM_CR1_CKD_1 /*!< Clock division: tDTS=4*tCK_INT */
-/**
- * @}
- */
-
-/** @defgroup TIM_Output_Compare_State TIM Output Compare State
- * @{
- */
-#define TIM_OUTPUTSTATE_DISABLE 0x00000000U /*!< Capture/Compare 1 output disabled */
-#define TIM_OUTPUTSTATE_ENABLE TIM_CCER_CC1E /*!< Capture/Compare 1 output enabled */
-/**
- * @}
- */
-
-/** @defgroup TIM_AutoReloadPreload TIM Auto-Reload Preload
- * @{
- */
-#define TIM_AUTORELOAD_PRELOAD_DISABLE 0x00000000U /*!< TIMx_ARR register is not buffered */
-#define TIM_AUTORELOAD_PRELOAD_ENABLE TIM_CR1_ARPE /*!< TIMx_ARR register is buffered */
-
-/**
- * @}
- */
-
-/** @defgroup TIM_Output_Fast_State TIM Output Fast State
- * @{
- */
-#define TIM_OCFAST_DISABLE 0x00000000U /*!< Output Compare fast disable */
-#define TIM_OCFAST_ENABLE TIM_CCMR1_OC1FE /*!< Output Compare fast enable */
-/**
- * @}
- */
-
-/** @defgroup TIM_Output_Compare_N_State TIM Complementary Output Compare State
- * @{
- */
-#define TIM_OUTPUTNSTATE_DISABLE 0x00000000U /*!< OCxN is disabled */
-#define TIM_OUTPUTNSTATE_ENABLE TIM_CCER_CC1NE /*!< OCxN is enabled */
-/**
- * @}
- */
-
-/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity
- * @{
- */
-#define TIM_OCPOLARITY_HIGH 0x00000000U /*!< Capture/Compare output polarity */
-#define TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< Capture/Compare output polarity */
-/**
- * @}
- */
-
-/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity
- * @{
- */
-#define TIM_OCNPOLARITY_HIGH 0x00000000U /*!< Capture/Compare complementary output polarity */
-#define TIM_OCNPOLARITY_LOW TIM_CCER_CC1NP /*!< Capture/Compare complementary output polarity */
-/**
- * @}
- */
-
-/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State
- * @{
- */
-#define TIM_OCIDLESTATE_SET TIM_CR2_OIS1 /*!< Output Idle state: OCx=1 when MOE=0 */
-#define TIM_OCIDLESTATE_RESET 0x00000000U /*!< Output Idle state: OCx=0 when MOE=0 */
-/**
- * @}
- */
-
-/** @defgroup TIM_Output_Compare_N_Idle_State TIM Complementary Output Compare Idle State
- * @{
- */
-#define TIM_OCNIDLESTATE_SET TIM_CR2_OIS1N /*!< Complementary output Idle state: OCxN=1 when MOE=0 */
-#define TIM_OCNIDLESTATE_RESET 0x00000000U /*!< Complementary output Idle state: OCxN=0 when MOE=0 */
-/**
- * @}
- */
-
-/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity
- * @{
- */
-#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Capture triggered by rising edge on timer input */
-#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Capture triggered by falling edge on timer input */
-#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Capture triggered by both rising and falling edges on timer input*/
-/**
- * @}
- */
-
-/** @defgroup TIM_Encoder_Input_Polarity TIM Encoder Input Polarity
- * @{
- */
-#define TIM_ENCODERINPUTPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Encoder input with rising edge polarity */
-#define TIM_ENCODERINPUTPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Encoder input with falling edge polarity */
-/**
- * @}
- */
-
-/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection
- * @{
- */
-#define TIM_ICSELECTION_DIRECTTI TIM_CCMR1_CC1S_0 /*!< TIM Input 1, 2, 3 or 4 is selected to be
- connected to IC1, IC2, IC3 or IC4, respectively */
-#define TIM_ICSELECTION_INDIRECTTI TIM_CCMR1_CC1S_1 /*!< TIM Input 1, 2, 3 or 4 is selected to be
- connected to IC2, IC1, IC4 or IC3, respectively */
-#define TIM_ICSELECTION_TRC TIM_CCMR1_CC1S /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */
-/**
- * @}
- */
-
-/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler
- * @{
- */
-#define TIM_ICPSC_DIV1 0x00000000U /*!< Capture performed each time an edge is detected on the capture input */
-#define TIM_ICPSC_DIV2 TIM_CCMR1_IC1PSC_0 /*!< Capture performed once every 2 events */
-#define TIM_ICPSC_DIV4 TIM_CCMR1_IC1PSC_1 /*!< Capture performed once every 4 events */
-#define TIM_ICPSC_DIV8 TIM_CCMR1_IC1PSC /*!< Capture performed once every 8 events */
-/**
- * @}
- */
-
-/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode
- * @{
- */
-#define TIM_OPMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */
-#define TIM_OPMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */
-/**
- * @}
- */
-
-/** @defgroup TIM_Encoder_Mode TIM Encoder Mode
- * @{
- */
-#define TIM_ENCODERMODE_TI1 TIM_SMCR_SMS_0 /*!< Quadrature encoder mode 1, x2 mode, counts up/down on TI1FP1 edge depending on TI2FP2 level */
-#define TIM_ENCODERMODE_TI2 TIM_SMCR_SMS_1 /*!< Quadrature encoder mode 2, x2 mode, counts up/down on TI2FP2 edge depending on TI1FP1 level. */
-#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Quadrature encoder mode 3, x4 mode, counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input. */
-/**
- * @}
- */
-
-/** @defgroup TIM_Interrupt_definition TIM interrupt Definition
- * @{
- */
-#define TIM_IT_UPDATE TIM_DIER_UIE /*!< Update interrupt */
-#define TIM_IT_CC1 TIM_DIER_CC1IE /*!< Capture/Compare 1 interrupt */
-#define TIM_IT_CC2 TIM_DIER_CC2IE /*!< Capture/Compare 2 interrupt */
-#define TIM_IT_CC3 TIM_DIER_CC3IE /*!< Capture/Compare 3 interrupt */
-#define TIM_IT_CC4 TIM_DIER_CC4IE /*!< Capture/Compare 4 interrupt */
-#define TIM_IT_COM TIM_DIER_COMIE /*!< Commutation interrupt */
-#define TIM_IT_TRIGGER TIM_DIER_TIE /*!< Trigger interrupt */
-#define TIM_IT_BREAK TIM_DIER_BIE /*!< Break interrupt */
-/**
- * @}
- */
-
-/** @defgroup TIM_Commutation_Source TIM Commutation Source
- * @{
- */
-#define TIM_COMMUTATION_TRGI TIM_CR2_CCUS /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit or when an rising edge occurs on trigger input */
-#define TIM_COMMUTATION_SOFTWARE 0x00000000U /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit */
-/**
- * @}
- */
-
-/** @defgroup TIM_DMA_sources TIM DMA Sources
- * @{
- */
-#define TIM_DMA_UPDATE TIM_DIER_UDE /*!< DMA request is triggered by the update event */
-#define TIM_DMA_CC1 TIM_DIER_CC1DE /*!< DMA request is triggered by the capture/compare macth 1 event */
-#define TIM_DMA_CC2 TIM_DIER_CC2DE /*!< DMA request is triggered by the capture/compare macth 2 event event */
-#define TIM_DMA_CC3 TIM_DIER_CC3DE /*!< DMA request is triggered by the capture/compare macth 3 event event */
-#define TIM_DMA_CC4 TIM_DIER_CC4DE /*!< DMA request is triggered by the capture/compare macth 4 event event */
-#define TIM_DMA_COM TIM_DIER_COMDE /*!< DMA request is triggered by the commutation event */
-#define TIM_DMA_TRIGGER TIM_DIER_TDE /*!< DMA request is triggered by the trigger event */
-/**
- * @}
- */
-
-/** @defgroup TIM_Flag_definition TIM Flag Definition
- * @{
- */
-#define TIM_FLAG_UPDATE TIM_SR_UIF /*!< Update interrupt flag */
-#define TIM_FLAG_CC1 TIM_SR_CC1IF /*!< Capture/Compare 1 interrupt flag */
-#define TIM_FLAG_CC2 TIM_SR_CC2IF /*!< Capture/Compare 2 interrupt flag */
-#define TIM_FLAG_CC3 TIM_SR_CC3IF /*!< Capture/Compare 3 interrupt flag */
-#define TIM_FLAG_CC4 TIM_SR_CC4IF /*!< Capture/Compare 4 interrupt flag */
-#define TIM_FLAG_COM TIM_SR_COMIF /*!< Commutation interrupt flag */
-#define TIM_FLAG_TRIGGER TIM_SR_TIF /*!< Trigger interrupt flag */
-#define TIM_FLAG_BREAK TIM_SR_BIF /*!< Break interrupt flag */
-#define TIM_FLAG_CC1OF TIM_SR_CC1OF /*!< Capture 1 overcapture flag */
-#define TIM_FLAG_CC2OF TIM_SR_CC2OF /*!< Capture 2 overcapture flag */
-#define TIM_FLAG_CC3OF TIM_SR_CC3OF /*!< Capture 3 overcapture flag */
-#define TIM_FLAG_CC4OF TIM_SR_CC4OF /*!< Capture 4 overcapture flag */
-/**
- * @}
- */
-
-/** @defgroup TIM_Channel TIM Channel
- * @{
- */
-#define TIM_CHANNEL_1 0x00000000U /*!< Capture/compare channel 1 identifier */
-#define TIM_CHANNEL_2 0x00000004U /*!< Capture/compare channel 2 identifier */
-#define TIM_CHANNEL_3 0x00000008U /*!< Capture/compare channel 3 identifier */
-#define TIM_CHANNEL_4 0x0000000CU /*!< Capture/compare channel 4 identifier */
-#define TIM_CHANNEL_ALL 0x0000003CU /*!< Global Capture/compare channel identifier */
-/**
- * @}
- */
-
-/** @defgroup TIM_Clock_Source TIM Clock Source
- * @{
- */
-#define TIM_CLOCKSOURCE_ETRMODE2 TIM_SMCR_ETPS_1 /*!< External clock source mode 2 */
-#define TIM_CLOCKSOURCE_INTERNAL TIM_SMCR_ETPS_0 /*!< Internal clock source */
-#define TIM_CLOCKSOURCE_ITR0 TIM_TS_ITR0 /*!< External clock source mode 1 (ITR0) */
-#define TIM_CLOCKSOURCE_ITR1 TIM_TS_ITR1 /*!< External clock source mode 1 (ITR1) */
-#define TIM_CLOCKSOURCE_ITR2 TIM_TS_ITR2 /*!< External clock source mode 1 (ITR2) */
-#define TIM_CLOCKSOURCE_ITR3 TIM_TS_ITR3 /*!< External clock source mode 1 (ITR3) */
-#define TIM_CLOCKSOURCE_TI1ED TIM_TS_TI1F_ED /*!< External clock source mode 1 (TTI1FP1 + edge detect.) */
-#define TIM_CLOCKSOURCE_TI1 TIM_TS_TI1FP1 /*!< External clock source mode 1 (TTI1FP1) */
-#define TIM_CLOCKSOURCE_TI2 TIM_TS_TI2FP2 /*!< External clock source mode 1 (TTI2FP2) */
-#define TIM_CLOCKSOURCE_ETRMODE1 TIM_TS_ETRF /*!< External clock source mode 1 (ETRF) */
-/**
- * @}
- */
-
-/** @defgroup TIM_Clock_Polarity TIM Clock Polarity
- * @{
- */
-#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */
-#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */
-#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */
-#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */
-#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */
-/**
- * @}
- */
-
-/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler
- * @{
- */
-#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
-#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */
-#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */
-#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */
-/**
- * @}
- */
-
-/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity
- * @{
- */
-#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */
-#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */
-/**
- * @}
- */
-
-/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler
- * @{
- */
-#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
-#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */
-#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */
-#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */
-/**
- * @}
- */
-
-/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state
- * @{
- */
-#define TIM_OSSR_ENABLE TIM_BDTR_OSSR /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */
-#define TIM_OSSR_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */
-/**
- * @}
- */
-
-/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state
- * @{
- */
-#define TIM_OSSI_ENABLE TIM_BDTR_OSSI /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */
-#define TIM_OSSI_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */
-/**
- * @}
- */
-/** @defgroup TIM_Lock_level TIM Lock level
- * @{
- */
-#define TIM_LOCKLEVEL_OFF 0x00000000U /*!< LOCK OFF */
-#define TIM_LOCKLEVEL_1 TIM_BDTR_LOCK_0 /*!< LOCK Level 1 */
-#define TIM_LOCKLEVEL_2 TIM_BDTR_LOCK_1 /*!< LOCK Level 2 */
-#define TIM_LOCKLEVEL_3 TIM_BDTR_LOCK /*!< LOCK Level 3 */
-/**
- * @}
- */
-
-/** @defgroup TIM_Break_Input_enable_disable TIM Break Input Enable
- * @{
- */
-#define TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break input BRK is enabled */
-#define TIM_BREAK_DISABLE 0x00000000U /*!< Break input BRK is disabled */
-/**
- * @}
- */
-
-/** @defgroup TIM_Break_Polarity TIM Break Input Polarity
- * @{
- */
-#define TIM_BREAKPOLARITY_LOW 0x00000000U /*!< Break input BRK is active low */
-#define TIM_BREAKPOLARITY_HIGH TIM_BDTR_BKP /*!< Break input BRK is active high */
-/**
- * @}
- */
-
-/** @defgroup TIM_AOE_Bit_Set_Reset TIM Automatic Output Enable
- * @{
- */
-#define TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */
-#define TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event
- (if none of the break inputs BRK and BRK2 is active) */
-/**
- * @}
- */
-
-/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection
- * @{
- */
-#define TIM_TRGO_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO) */
-#define TIM_TRGO_ENABLE TIM_CR2_MMS_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO) */
-#define TIM_TRGO_UPDATE TIM_CR2_MMS_1 /*!< Update event is used as trigger output (TRGO) */
-#define TIM_TRGO_OC1 (TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO) */
-#define TIM_TRGO_OC1REF TIM_CR2_MMS_2 /*!< OC1REF signal is used as trigger output (TRGO) */
-#define TIM_TRGO_OC2REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_0) /*!< OC2REF signal is used as trigger output(TRGO) */
-#define TIM_TRGO_OC3REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1) /*!< OC3REF signal is used as trigger output(TRGO) */
-#define TIM_TRGO_OC4REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< OC4REF signal is used as trigger output(TRGO) */
-/**
- * @}
- */
-
-/** @defgroup TIM_Master_Slave_Mode TIM Master/Slave Mode
- * @{
- */
-#define TIM_MASTERSLAVEMODE_ENABLE TIM_SMCR_MSM /*!< No action */
-#define TIM_MASTERSLAVEMODE_DISABLE 0x00000000U /*!< Master/slave mode is selected */
-/**
- * @}
- */
-
-/** @defgroup TIM_Slave_Mode TIM Slave mode
- * @{
- */
-#define TIM_SLAVEMODE_DISABLE 0x00000000U /*!< Slave mode disabled */
-#define TIM_SLAVEMODE_RESET TIM_SMCR_SMS_2 /*!< Reset Mode */
-#define TIM_SLAVEMODE_GATED (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0) /*!< Gated Mode */
-#define TIM_SLAVEMODE_TRIGGER (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1) /*!< Trigger Mode */
-#define TIM_SLAVEMODE_EXTERNAL1 (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< External Clock Mode 1 */
-/**
- * @}
- */
-
-/** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare and PWM Modes
- * @{
- */
-#define TIM_OCMODE_TIMING 0x00000000U /*!< Frozen */
-#define TIM_OCMODE_ACTIVE TIM_CCMR1_OC1M_0 /*!< Set channel to active level on match */
-#define TIM_OCMODE_INACTIVE TIM_CCMR1_OC1M_1 /*!< Set channel to inactive level on match */
-#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< Toggle */
-#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1) /*!< PWM mode 1 */
-#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< PWM mode 2 */
-#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0) /*!< Force active level */
-#define TIM_OCMODE_FORCED_INACTIVE TIM_CCMR1_OC1M_2 /*!< Force inactive level */
-/**
- * @}
- */
-
-/** @defgroup TIM_Trigger_Selection TIM Trigger Selection
- * @{
- */
-#define TIM_TS_ITR0 0x00000000U /*!< Internal Trigger 0 (ITR0) */
-#define TIM_TS_ITR1 TIM_SMCR_TS_0 /*!< Internal Trigger 1 (ITR1) */
-#define TIM_TS_ITR2 TIM_SMCR_TS_1 /*!< Internal Trigger 2 (ITR2) */
-#define TIM_TS_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1) /*!< Internal Trigger 3 (ITR3) */
-#define TIM_TS_TI1F_ED TIM_SMCR_TS_2 /*!< TI1 Edge Detector (TI1F_ED) */
-#define TIM_TS_TI1FP1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 1 (TI1FP1) */
-#define TIM_TS_TI2FP2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 2 (TI2FP2) */
-#define TIM_TS_ETRF (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered External Trigger input (ETRF) */
-#define TIM_TS_NONE 0x0000FFFFU /*!< No trigger selected */
-/**
- * @}
- */
-
-/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity
- * @{
- */
-#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */
-#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */
-#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
-#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
-#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */
-/**
- * @}
- */
-
-/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler
- * @{
- */
-#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
-#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */
-#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */
-#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */
-/**
- * @}
- */
-
-/** @defgroup TIM_TI1_Selection TIM TI1 Input Selection
- * @{
- */
-#define TIM_TI1SELECTION_CH1 0x00000000U /*!< The TIMx_CH1 pin is connected to TI1 input */
-#define TIM_TI1SELECTION_XORCOMBINATION TIM_CR2_TI1S /*!< The TIMx_CH1, CH2 and CH3 pins are connected to the TI1 input (XOR combination) */
-/**
- * @}
- */
-
-/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length
- * @{
- */
-#define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U /*!< The transfer is done to 1 register starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U /*!< The transfer is done to 2 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U /*!< The transfer is done to 3 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U /*!< The transfer is done to 4 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U /*!< The transfer is done to 5 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U /*!< The transfer is done to 6 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U /*!< The transfer is done to 7 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U /*!< The transfer is done to 8 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U /*!< The transfer is done to 9 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U /*!< The transfer is done to 10 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U /*!< The transfer is done to 11 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U /*!< The transfer is done to 12 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U /*!< The transfer is done to 13 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U /*!< The transfer is done to 14 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U /*!< The transfer is done to 15 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U /*!< The transfer is done to 16 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U /*!< The transfer is done to 17 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U /*!< The transfer is done to 18 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-/**
- * @}
- */
-
-/** @defgroup DMA_Handle_index TIM DMA Handle Index
- * @{
- */
-#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0000) /*!< Index of the DMA handle used for Update DMA requests */
-#define TIM_DMA_ID_CC1 ((uint16_t) 0x0001) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */
-#define TIM_DMA_ID_CC2 ((uint16_t) 0x0002) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */
-#define TIM_DMA_ID_CC3 ((uint16_t) 0x0003) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */
-#define TIM_DMA_ID_CC4 ((uint16_t) 0x0004) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */
-#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x0005) /*!< Index of the DMA handle used for Commutation DMA requests */
-#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x0006) /*!< Index of the DMA handle used for Trigger DMA requests */
-/**
- * @}
- */
-
-/** @defgroup Channel_CC_State TIM Capture/Compare Channel State
- * @{
- */
-#define TIM_CCx_ENABLE 0x00000001U /*!< Input or output channel is enabled */
-#define TIM_CCx_DISABLE 0x00000000U /*!< Input or output channel is disabled */
-#define TIM_CCxN_ENABLE 0x00000004U /*!< Complementary output channel is enabled */
-#define TIM_CCxN_DISABLE 0x00000000U /*!< Complementary output channel is enabled */
-/**
- * @}
- */
-
-/**
- * @}
- */
-/* End of exported constants -------------------------------------------------*/
-
-/* Exported macros -----------------------------------------------------------*/
-/** @defgroup TIM_Exported_Macros TIM Exported Macros
- * @{
- */
-
-/** @brief Reset TIM handle state.
- * @param __HANDLE__ TIM handle.
- * @retval None
- */
-#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
-#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \
- (__HANDLE__)->State = HAL_TIM_STATE_RESET; \
- (__HANDLE__)->Base_MspInitCallback = NULL; \
- (__HANDLE__)->Base_MspDeInitCallback = NULL; \
- (__HANDLE__)->IC_MspInitCallback = NULL; \
- (__HANDLE__)->IC_MspDeInitCallback = NULL; \
- (__HANDLE__)->OC_MspInitCallback = NULL; \
- (__HANDLE__)->OC_MspDeInitCallback = NULL; \
- (__HANDLE__)->PWM_MspInitCallback = NULL; \
- (__HANDLE__)->PWM_MspDeInitCallback = NULL; \
- (__HANDLE__)->OnePulse_MspInitCallback = NULL; \
- (__HANDLE__)->OnePulse_MspDeInitCallback = NULL; \
- (__HANDLE__)->Encoder_MspInitCallback = NULL; \
- (__HANDLE__)->Encoder_MspDeInitCallback = NULL; \
- (__HANDLE__)->HallSensor_MspInitCallback = NULL; \
- (__HANDLE__)->HallSensor_MspDeInitCallback = NULL; \
- } while(0)
-#else
-#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TIM_STATE_RESET)
-#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
-
-/**
- * @brief Enable the TIM peripheral.
- * @param __HANDLE__ TIM handle
- * @retval None
- */
-#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN))
-
-/**
- * @brief Enable the TIM main Output.
- * @param __HANDLE__ TIM handle
- * @retval None
- */
-#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE))
-
-/**
- * @brief Disable the TIM peripheral.
- * @param __HANDLE__ TIM handle
- * @retval None
- */
-#define __HAL_TIM_DISABLE(__HANDLE__) \
- do { \
- if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \
- { \
- if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \
- { \
- (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \
- } \
- } \
- } while(0)
-
-/**
- * @brief Disable the TIM main Output.
- * @param __HANDLE__ TIM handle
- * @retval None
- * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been disabled
- */
-#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \
- do { \
- if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \
- { \
- if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \
- { \
- (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \
- } \
- } \
- } while(0)
-
-/**
- * @brief Disable the TIM main Output.
- * @param __HANDLE__ TIM handle
- * @retval None
- * @note The Main Output Enable of a timer instance is disabled unconditionally
- */
-#define __HAL_TIM_MOE_DISABLE_UNCONDITIONALLY(__HANDLE__) (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE)
-
-/** @brief Enable the specified TIM interrupt.
- * @param __HANDLE__ specifies the TIM Handle.
- * @param __INTERRUPT__ specifies the TIM interrupt source to enable.
- * This parameter can be one of the following values:
- * @arg TIM_IT_UPDATE: Update interrupt
- * @arg TIM_IT_CC1: Capture/Compare 1 interrupt
- * @arg TIM_IT_CC2: Capture/Compare 2 interrupt
- * @arg TIM_IT_CC3: Capture/Compare 3 interrupt
- * @arg TIM_IT_CC4: Capture/Compare 4 interrupt
- * @arg TIM_IT_COM: Commutation interrupt
- * @arg TIM_IT_TRIGGER: Trigger interrupt
- * @arg TIM_IT_BREAK: Break interrupt
- * @retval None
- */
-#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__))
-
-/** @brief Disable the specified TIM interrupt.
- * @param __HANDLE__ specifies the TIM Handle.
- * @param __INTERRUPT__ specifies the TIM interrupt source to disable.
- * This parameter can be one of the following values:
- * @arg TIM_IT_UPDATE: Update interrupt
- * @arg TIM_IT_CC1: Capture/Compare 1 interrupt
- * @arg TIM_IT_CC2: Capture/Compare 2 interrupt
- * @arg TIM_IT_CC3: Capture/Compare 3 interrupt
- * @arg TIM_IT_CC4: Capture/Compare 4 interrupt
- * @arg TIM_IT_COM: Commutation interrupt
- * @arg TIM_IT_TRIGGER: Trigger interrupt
- * @arg TIM_IT_BREAK: Break interrupt
- * @retval None
- */
-#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__))
-
-/** @brief Enable the specified DMA request.
- * @param __HANDLE__ specifies the TIM Handle.
- * @param __DMA__ specifies the TIM DMA request to enable.
- * This parameter can be one of the following values:
- * @arg TIM_DMA_UPDATE: Update DMA request
- * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request
- * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request
- * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request
- * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request
- * @arg TIM_DMA_COM: Commutation DMA request
- * @arg TIM_DMA_TRIGGER: Trigger DMA request
- * @retval None
- */
-#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__))
-
-/** @brief Disable the specified DMA request.
- * @param __HANDLE__ specifies the TIM Handle.
- * @param __DMA__ specifies the TIM DMA request to disable.
- * This parameter can be one of the following values:
- * @arg TIM_DMA_UPDATE: Update DMA request
- * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request
- * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request
- * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request
- * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request
- * @arg TIM_DMA_COM: Commutation DMA request
- * @arg TIM_DMA_TRIGGER: Trigger DMA request
- * @retval None
- */
-#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__))
-
-/** @brief Check whether the specified TIM interrupt flag is set or not.
- * @param __HANDLE__ specifies the TIM Handle.
- * @param __FLAG__ specifies the TIM interrupt flag to check.
- * This parameter can be one of the following values:
- * @arg TIM_FLAG_UPDATE: Update interrupt flag
- * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag
- * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag
- * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag
- * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag
- * @arg TIM_FLAG_COM: Commutation interrupt flag
- * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag
- * @arg TIM_FLAG_BREAK: Break interrupt flag
- * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag
- * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag
- * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag
- * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag
- * @retval The new state of __FLAG__ (TRUE or FALSE).
- */
-#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__))
-
-/** @brief Clear the specified TIM interrupt flag.
- * @param __HANDLE__ specifies the TIM Handle.
- * @param __FLAG__ specifies the TIM interrupt flag to clear.
- * This parameter can be one of the following values:
- * @arg TIM_FLAG_UPDATE: Update interrupt flag
- * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag
- * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag
- * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag
- * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag
- * @arg TIM_FLAG_COM: Commutation interrupt flag
- * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag
- * @arg TIM_FLAG_BREAK: Break interrupt flag
- * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag
- * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag
- * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag
- * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag
- * @retval The new state of __FLAG__ (TRUE or FALSE).
- */
-#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
-
-/**
- * @brief Check whether the specified TIM interrupt source is enabled or not.
- * @param __HANDLE__ TIM handle
- * @param __INTERRUPT__ specifies the TIM interrupt source to check.
- * This parameter can be one of the following values:
- * @arg TIM_IT_UPDATE: Update interrupt
- * @arg TIM_IT_CC1: Capture/Compare 1 interrupt
- * @arg TIM_IT_CC2: Capture/Compare 2 interrupt
- * @arg TIM_IT_CC3: Capture/Compare 3 interrupt
- * @arg TIM_IT_CC4: Capture/Compare 4 interrupt
- * @arg TIM_IT_COM: Commutation interrupt
- * @arg TIM_IT_TRIGGER: Trigger interrupt
- * @arg TIM_IT_BREAK: Break interrupt
- * @retval The state of TIM_IT (SET or RESET).
- */
-#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) \
- == (__INTERRUPT__)) ? SET : RESET)
-
-/** @brief Clear the TIM interrupt pending bits.
- * @param __HANDLE__ TIM handle
- * @param __INTERRUPT__ specifies the interrupt pending bit to clear.
- * This parameter can be one of the following values:
- * @arg TIM_IT_UPDATE: Update interrupt
- * @arg TIM_IT_CC1: Capture/Compare 1 interrupt
- * @arg TIM_IT_CC2: Capture/Compare 2 interrupt
- * @arg TIM_IT_CC3: Capture/Compare 3 interrupt
- * @arg TIM_IT_CC4: Capture/Compare 4 interrupt
- * @arg TIM_IT_COM: Commutation interrupt
- * @arg TIM_IT_TRIGGER: Trigger interrupt
- * @arg TIM_IT_BREAK: Break interrupt
- * @retval None
- */
-#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))
-
-/**
- * @brief Indicates whether or not the TIM Counter is used as downcounter.
- * @param __HANDLE__ TIM handle.
- * @retval False (Counter used as upcounter) or True (Counter used as downcounter)
- * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode or Encoder
-mode.
- */
-#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR))
-
-/**
- * @brief Set the TIM Prescaler on runtime.
- * @param __HANDLE__ TIM handle.
- * @param __PRESC__ specifies the Prescaler new value.
- * @retval None
- */
-#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__))
-
-/**
- * @brief Set the TIM Counter Register value on runtime.
- * @param __HANDLE__ TIM handle.
- * @param __COUNTER__ specifies the Counter register new value.
- * @retval None
- */
-#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__))
-
-/**
- * @brief Get the TIM Counter Register value on runtime.
- * @param __HANDLE__ TIM handle.
- * @retval 16-bit or 32-bit value of the timer counter register (TIMx_CNT)
- */
-#define __HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT)
-
-/**
- * @brief Set the TIM Autoreload Register value on runtime without calling another time any Init function.
- * @param __HANDLE__ TIM handle.
- * @param __AUTORELOAD__ specifies the Counter register new value.
- * @retval None
- */
-#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \
- do{ \
- (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \
- (__HANDLE__)->Init.Period = (__AUTORELOAD__); \
- } while(0)
-
-/**
- * @brief Get the TIM Autoreload Register value on runtime.
- * @param __HANDLE__ TIM handle.
- * @retval 16-bit or 32-bit value of the timer auto-reload register(TIMx_ARR)
- */
-#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR)
-
-/**
- * @brief Set the TIM Clock Division value on runtime without calling another time any Init function.
- * @param __HANDLE__ TIM handle.
- * @param __CKD__ specifies the clock division value.
- * This parameter can be one of the following value:
- * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT
- * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT
- * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT
- * @retval None
- */
-#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \
- do{ \
- (__HANDLE__)->Instance->CR1 &= (~TIM_CR1_CKD); \
- (__HANDLE__)->Instance->CR1 |= (__CKD__); \
- (__HANDLE__)->Init.ClockDivision = (__CKD__); \
- } while(0)
-
-/**
- * @brief Get the TIM Clock Division value on runtime.
- * @param __HANDLE__ TIM handle.
- * @retval The clock division can be one of the following values:
- * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT
- * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT
- * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT
- */
-#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD)
-
-/**
- * @brief Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel() function.
- * @param __HANDLE__ TIM handle.
- * @param __CHANNEL__ TIM Channels to be configured.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @param __ICPSC__ specifies the Input Capture4 prescaler new value.
- * This parameter can be one of the following values:
- * @arg TIM_ICPSC_DIV1: no prescaler
- * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
- * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
- * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
- * @retval None
- */
-#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \
- do{ \
- TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \
- TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \
- } while(0)
-
-/**
- * @brief Get the TIM Input Capture prescaler on runtime.
- * @param __HANDLE__ TIM handle.
- * @param __CHANNEL__ TIM Channels to be configured.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: get input capture 1 prescaler value
- * @arg TIM_CHANNEL_2: get input capture 2 prescaler value
- * @arg TIM_CHANNEL_3: get input capture 3 prescaler value
- * @arg TIM_CHANNEL_4: get input capture 4 prescaler value
- * @retval The input capture prescaler can be one of the following values:
- * @arg TIM_ICPSC_DIV1: no prescaler
- * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
- * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
- * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
- */
-#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \
- (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\
- ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8U) :\
- ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\
- (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8U)
-
-/**
- * @brief Set the TIM Capture Compare Register value on runtime without calling another time ConfigChannel function.
- * @param __HANDLE__ TIM handle.
- * @param __CHANNEL__ TIM Channels to be configured.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @param __COMPARE__ specifies the Capture Compare register new value.
- * @retval None
- */
-#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \
- (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\
- ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\
- ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\
- ((__HANDLE__)->Instance->CCR4 = (__COMPARE__)))
-
-/**
- * @brief Get the TIM Capture Compare Register value on runtime.
- * @param __HANDLE__ TIM handle.
- * @param __CHANNEL__ TIM Channel associated with the capture compare register
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: get capture/compare 1 register value
- * @arg TIM_CHANNEL_2: get capture/compare 2 register value
- * @arg TIM_CHANNEL_3: get capture/compare 3 register value
- * @arg TIM_CHANNEL_4: get capture/compare 4 register value
- * @retval 16-bit or 32-bit value of the capture/compare register (TIMx_CCRy)
- */
-#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \
- (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\
- ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\
- ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\
- ((__HANDLE__)->Instance->CCR4))
-
-/**
- * @brief Set the TIM Output compare preload.
- * @param __HANDLE__ TIM handle.
- * @param __CHANNEL__ TIM Channels to be configured.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval None
- */
-#define __HAL_TIM_ENABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \
- (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1PE) :\
- ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2PE) :\
- ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3PE) :\
- ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4PE))
-
-/**
- * @brief Reset the TIM Output compare preload.
- * @param __HANDLE__ TIM handle.
- * @param __CHANNEL__ TIM Channels to be configured.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval None
- */
-#define __HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \
- (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1PE) :\
- ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2PE) :\
- ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3PE) :\
- ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4PE))
-
-/**
- * @brief Enable fast mode for a given channel.
- * @param __HANDLE__ TIM handle.
- * @param __CHANNEL__ TIM Channels to be configured.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @note When fast mode is enabled an active edge on the trigger input acts
- * like a compare match on CCx output. Delay to sample the trigger
- * input and to activate CCx output is reduced to 3 clock cycles.
- * @note Fast mode acts only if the channel is configured in PWM1 or PWM2 mode.
- * @retval None
- */
-#define __HAL_TIM_ENABLE_OCxFAST(__HANDLE__, __CHANNEL__) \
- (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1FE) :\
- ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2FE) :\
- ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3FE) :\
- ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4FE))
-
-/**
- * @brief Disable fast mode for a given channel.
- * @param __HANDLE__ TIM handle.
- * @param __CHANNEL__ TIM Channels to be configured.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @note When fast mode is disabled CCx output behaves normally depending
- * on counter and CCRx values even when the trigger is ON. The minimum
- * delay to activate CCx output when an active edge occurs on the
- * trigger input is 5 clock cycles.
- * @retval None
- */
-#define __HAL_TIM_DISABLE_OCxFAST(__HANDLE__, __CHANNEL__) \
- (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE) :\
- ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE) :\
- ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE) :\
- ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE))
-
-/**
- * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register.
- * @param __HANDLE__ TIM handle.
- * @note When the URS bit of the TIMx_CR1 register is set, only counter
- * overflow/underflow generates an update interrupt or DMA request (if
- * enabled)
- * @retval None
- */
-#define __HAL_TIM_URS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|= TIM_CR1_URS)
-
-/**
- * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register.
- * @param __HANDLE__ TIM handle.
- * @note When the URS bit of the TIMx_CR1 register is reset, any of the
- * following events generate an update interrupt or DMA request (if
- * enabled):
- * _ Counter overflow underflow
- * _ Setting the UG bit
- * _ Update generation through the slave mode controller
- * @retval None
- */
-#define __HAL_TIM_URS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1&=~TIM_CR1_URS)
-
-/**
- * @brief Set the TIM Capture x input polarity on runtime.
- * @param __HANDLE__ TIM handle.
- * @param __CHANNEL__ TIM Channels to be configured.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @param __POLARITY__ Polarity for TIx source
- * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge
- * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge
- * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge
- * @retval None
- */
-#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \
- do{ \
- TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \
- TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \
- }while(0)
-
-/**
- * @}
- */
-/* End of exported macros ----------------------------------------------------*/
-
-/* Private constants ---------------------------------------------------------*/
-/** @defgroup TIM_Private_Constants TIM Private Constants
- * @{
- */
-/* The counter of a timer instance is disabled only if all the CCx and CCxN
- channels have been disabled */
-#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E))
-#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE))
-/**
- * @}
- */
-/* End of private constants --------------------------------------------------*/
-
-/* Private macros ------------------------------------------------------------*/
-/** @defgroup TIM_Private_Macros TIM Private Macros
- * @{
- */
-#define IS_TIM_CLEARINPUT_SOURCE(__MODE__) (((__MODE__) == TIM_CLEARINPUTSOURCE_NONE) || \
- ((__MODE__) == TIM_CLEARINPUTSOURCE_ETR) || \
- ((__MODE__) == TIM_CLEARINPUTSOURCE_OCREFCLR))
-
-#define IS_TIM_DMA_BASE(__BASE__) (((__BASE__) == TIM_DMABASE_CR1) || \
- ((__BASE__) == TIM_DMABASE_CR2) || \
- ((__BASE__) == TIM_DMABASE_SMCR) || \
- ((__BASE__) == TIM_DMABASE_DIER) || \
- ((__BASE__) == TIM_DMABASE_SR) || \
- ((__BASE__) == TIM_DMABASE_EGR) || \
- ((__BASE__) == TIM_DMABASE_CCMR1) || \
- ((__BASE__) == TIM_DMABASE_CCMR2) || \
- ((__BASE__) == TIM_DMABASE_CCER) || \
- ((__BASE__) == TIM_DMABASE_CNT) || \
- ((__BASE__) == TIM_DMABASE_PSC) || \
- ((__BASE__) == TIM_DMABASE_ARR) || \
- ((__BASE__) == TIM_DMABASE_RCR) || \
- ((__BASE__) == TIM_DMABASE_CCR1) || \
- ((__BASE__) == TIM_DMABASE_CCR2) || \
- ((__BASE__) == TIM_DMABASE_CCR3) || \
- ((__BASE__) == TIM_DMABASE_CCR4) || \
- ((__BASE__) == TIM_DMABASE_BDTR))
-
-#define IS_TIM_EVENT_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFFFF00U) == 0x00000000U) && ((__SOURCE__) != 0x00000000U))
-
-#define IS_TIM_COUNTER_MODE(__MODE__) (((__MODE__) == TIM_COUNTERMODE_UP) || \
- ((__MODE__) == TIM_COUNTERMODE_DOWN) || \
- ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED1) || \
- ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED2) || \
- ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED3))
-
-#define IS_TIM_CLOCKDIVISION_DIV(__DIV__) (((__DIV__) == TIM_CLOCKDIVISION_DIV1) || \
- ((__DIV__) == TIM_CLOCKDIVISION_DIV2) || \
- ((__DIV__) == TIM_CLOCKDIVISION_DIV4))
-
-#define IS_TIM_AUTORELOAD_PRELOAD(PRELOAD) (((PRELOAD) == TIM_AUTORELOAD_PRELOAD_DISABLE) || \
- ((PRELOAD) == TIM_AUTORELOAD_PRELOAD_ENABLE))
-
-#define IS_TIM_FAST_STATE(__STATE__) (((__STATE__) == TIM_OCFAST_DISABLE) || \
- ((__STATE__) == TIM_OCFAST_ENABLE))
-
-#define IS_TIM_OC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCPOLARITY_HIGH) || \
- ((__POLARITY__) == TIM_OCPOLARITY_LOW))
-
-#define IS_TIM_OCN_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCNPOLARITY_HIGH) || \
- ((__POLARITY__) == TIM_OCNPOLARITY_LOW))
-
-#define IS_TIM_OCIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCIDLESTATE_SET) || \
- ((__STATE__) == TIM_OCIDLESTATE_RESET))
-
-#define IS_TIM_OCNIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCNIDLESTATE_SET) || \
- ((__STATE__) == TIM_OCNIDLESTATE_RESET))
-
-#define IS_TIM_ENCODERINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_RISING) || \
- ((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_FALLING))
-
-#define IS_TIM_IC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ICPOLARITY_RISING) || \
- ((__POLARITY__) == TIM_ICPOLARITY_FALLING) || \
- ((__POLARITY__) == TIM_ICPOLARITY_BOTHEDGE))
-
-#define IS_TIM_IC_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_ICSELECTION_DIRECTTI) || \
- ((__SELECTION__) == TIM_ICSELECTION_INDIRECTTI) || \
- ((__SELECTION__) == TIM_ICSELECTION_TRC))
-
-#define IS_TIM_IC_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_ICPSC_DIV1) || \
- ((__PRESCALER__) == TIM_ICPSC_DIV2) || \
- ((__PRESCALER__) == TIM_ICPSC_DIV4) || \
- ((__PRESCALER__) == TIM_ICPSC_DIV8))
-
-#define IS_TIM_OPM_MODE(__MODE__) (((__MODE__) == TIM_OPMODE_SINGLE) || \
- ((__MODE__) == TIM_OPMODE_REPETITIVE))
-
-#define IS_TIM_ENCODER_MODE(__MODE__) (((__MODE__) == TIM_ENCODERMODE_TI1) || \
- ((__MODE__) == TIM_ENCODERMODE_TI2) || \
- ((__MODE__) == TIM_ENCODERMODE_TI12))
-
-#define IS_TIM_DMA_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFF80FFU) == 0x00000000U) && ((__SOURCE__) != 0x00000000U))
-
-#define IS_TIM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \
- ((__CHANNEL__) == TIM_CHANNEL_2) || \
- ((__CHANNEL__) == TIM_CHANNEL_3) || \
- ((__CHANNEL__) == TIM_CHANNEL_4) || \
- ((__CHANNEL__) == TIM_CHANNEL_ALL))
-
-#define IS_TIM_OPM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \
- ((__CHANNEL__) == TIM_CHANNEL_2))
-
-#define IS_TIM_COMPLEMENTARY_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \
- ((__CHANNEL__) == TIM_CHANNEL_2) || \
- ((__CHANNEL__) == TIM_CHANNEL_3))
-
-#define IS_TIM_CLOCKSOURCE(__CLOCK__) (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \
- ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \
- ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \
- ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \
- ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \
- ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3) || \
- ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \
- ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \
- ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \
- ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1))
-
-#define IS_TIM_CLOCKPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLOCKPOLARITY_INVERTED) || \
- ((__POLARITY__) == TIM_CLOCKPOLARITY_NONINVERTED) || \
- ((__POLARITY__) == TIM_CLOCKPOLARITY_RISING) || \
- ((__POLARITY__) == TIM_CLOCKPOLARITY_FALLING) || \
- ((__POLARITY__) == TIM_CLOCKPOLARITY_BOTHEDGE))
-
-#define IS_TIM_CLOCKPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV1) || \
- ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV2) || \
- ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV4) || \
- ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV8))
-
-#define IS_TIM_CLOCKFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU)
-
-#define IS_TIM_CLEARINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLEARINPUTPOLARITY_INVERTED) || \
- ((__POLARITY__) == TIM_CLEARINPUTPOLARITY_NONINVERTED))
-
-#define IS_TIM_CLEARINPUT_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV1) || \
- ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV2) || \
- ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV4) || \
- ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV8))
-
-#define IS_TIM_CLEARINPUT_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU)
-
-#define IS_TIM_OSSR_STATE(__STATE__) (((__STATE__) == TIM_OSSR_ENABLE) || \
- ((__STATE__) == TIM_OSSR_DISABLE))
-
-#define IS_TIM_OSSI_STATE(__STATE__) (((__STATE__) == TIM_OSSI_ENABLE) || \
- ((__STATE__) == TIM_OSSI_DISABLE))
-
-#define IS_TIM_LOCK_LEVEL(__LEVEL__) (((__LEVEL__) == TIM_LOCKLEVEL_OFF) || \
- ((__LEVEL__) == TIM_LOCKLEVEL_1) || \
- ((__LEVEL__) == TIM_LOCKLEVEL_2) || \
- ((__LEVEL__) == TIM_LOCKLEVEL_3))
-
-#define IS_TIM_BREAK_FILTER(__BRKFILTER__) ((__BRKFILTER__) <= 0xFUL)
-
-
-#define IS_TIM_BREAK_STATE(__STATE__) (((__STATE__) == TIM_BREAK_ENABLE) || \
- ((__STATE__) == TIM_BREAK_DISABLE))
-
-#define IS_TIM_BREAK_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKPOLARITY_LOW) || \
- ((__POLARITY__) == TIM_BREAKPOLARITY_HIGH))
-
-#define IS_TIM_AUTOMATIC_OUTPUT_STATE(__STATE__) (((__STATE__) == TIM_AUTOMATICOUTPUT_ENABLE) || \
- ((__STATE__) == TIM_AUTOMATICOUTPUT_DISABLE))
-
-#define IS_TIM_TRGO_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO_RESET) || \
- ((__SOURCE__) == TIM_TRGO_ENABLE) || \
- ((__SOURCE__) == TIM_TRGO_UPDATE) || \
- ((__SOURCE__) == TIM_TRGO_OC1) || \
- ((__SOURCE__) == TIM_TRGO_OC1REF) || \
- ((__SOURCE__) == TIM_TRGO_OC2REF) || \
- ((__SOURCE__) == TIM_TRGO_OC3REF) || \
- ((__SOURCE__) == TIM_TRGO_OC4REF))
-
-#define IS_TIM_MSM_STATE(__STATE__) (((__STATE__) == TIM_MASTERSLAVEMODE_ENABLE) || \
- ((__STATE__) == TIM_MASTERSLAVEMODE_DISABLE))
-
-#define IS_TIM_SLAVE_MODE(__MODE__) (((__MODE__) == TIM_SLAVEMODE_DISABLE) || \
- ((__MODE__) == TIM_SLAVEMODE_RESET) || \
- ((__MODE__) == TIM_SLAVEMODE_GATED) || \
- ((__MODE__) == TIM_SLAVEMODE_TRIGGER) || \
- ((__MODE__) == TIM_SLAVEMODE_EXTERNAL1))
-
-#define IS_TIM_PWM_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_PWM1) || \
- ((__MODE__) == TIM_OCMODE_PWM2))
-
-#define IS_TIM_OC_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_TIMING) || \
- ((__MODE__) == TIM_OCMODE_ACTIVE) || \
- ((__MODE__) == TIM_OCMODE_INACTIVE) || \
- ((__MODE__) == TIM_OCMODE_TOGGLE) || \
- ((__MODE__) == TIM_OCMODE_FORCED_ACTIVE) || \
- ((__MODE__) == TIM_OCMODE_FORCED_INACTIVE))
-
-#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \
- ((__SELECTION__) == TIM_TS_ITR1) || \
- ((__SELECTION__) == TIM_TS_ITR2) || \
- ((__SELECTION__) == TIM_TS_ITR3) || \
- ((__SELECTION__) == TIM_TS_TI1F_ED) || \
- ((__SELECTION__) == TIM_TS_TI1FP1) || \
- ((__SELECTION__) == TIM_TS_TI2FP2) || \
- ((__SELECTION__) == TIM_TS_ETRF))
-
-#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \
- ((__SELECTION__) == TIM_TS_ITR1) || \
- ((__SELECTION__) == TIM_TS_ITR2) || \
- ((__SELECTION__) == TIM_TS_ITR3) || \
- ((__SELECTION__) == TIM_TS_NONE))
-
-#define IS_TIM_TRIGGERPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_TRIGGERPOLARITY_INVERTED ) || \
- ((__POLARITY__) == TIM_TRIGGERPOLARITY_NONINVERTED) || \
- ((__POLARITY__) == TIM_TRIGGERPOLARITY_RISING ) || \
- ((__POLARITY__) == TIM_TRIGGERPOLARITY_FALLING ) || \
- ((__POLARITY__) == TIM_TRIGGERPOLARITY_BOTHEDGE ))
-
-#define IS_TIM_TRIGGERPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV1) || \
- ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV2) || \
- ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV4) || \
- ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV8))
-
-#define IS_TIM_TRIGGERFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU)
-
-#define IS_TIM_TI1SELECTION(__TI1SELECTION__) (((__TI1SELECTION__) == TIM_TI1SELECTION_CH1) || \
- ((__TI1SELECTION__) == TIM_TI1SELECTION_XORCOMBINATION))
-
-#define IS_TIM_DMA_LENGTH(__LENGTH__) (((__LENGTH__) == TIM_DMABURSTLENGTH_1TRANSFER) || \
- ((__LENGTH__) == TIM_DMABURSTLENGTH_2TRANSFERS) || \
- ((__LENGTH__) == TIM_DMABURSTLENGTH_3TRANSFERS) || \
- ((__LENGTH__) == TIM_DMABURSTLENGTH_4TRANSFERS) || \
- ((__LENGTH__) == TIM_DMABURSTLENGTH_5TRANSFERS) || \
- ((__LENGTH__) == TIM_DMABURSTLENGTH_6TRANSFERS) || \
- ((__LENGTH__) == TIM_DMABURSTLENGTH_7TRANSFERS) || \
- ((__LENGTH__) == TIM_DMABURSTLENGTH_8TRANSFERS) || \
- ((__LENGTH__) == TIM_DMABURSTLENGTH_9TRANSFERS) || \
- ((__LENGTH__) == TIM_DMABURSTLENGTH_10TRANSFERS) || \
- ((__LENGTH__) == TIM_DMABURSTLENGTH_11TRANSFERS) || \
- ((__LENGTH__) == TIM_DMABURSTLENGTH_12TRANSFERS) || \
- ((__LENGTH__) == TIM_DMABURSTLENGTH_13TRANSFERS) || \
- ((__LENGTH__) == TIM_DMABURSTLENGTH_14TRANSFERS) || \
- ((__LENGTH__) == TIM_DMABURSTLENGTH_15TRANSFERS) || \
- ((__LENGTH__) == TIM_DMABURSTLENGTH_16TRANSFERS) || \
- ((__LENGTH__) == TIM_DMABURSTLENGTH_17TRANSFERS) || \
- ((__LENGTH__) == TIM_DMABURSTLENGTH_18TRANSFERS))
-
-#define IS_TIM_DMA_DATA_LENGTH(LENGTH) (((LENGTH) >= 0x1U) && ((LENGTH) < 0x10000U))
-
-#define IS_TIM_IC_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU)
-
-#define IS_TIM_DEADTIME(__DEADTIME__) ((__DEADTIME__) <= 0xFFU)
-
-#define IS_TIM_SLAVEMODE_TRIGGER_ENABLED(__TRIGGER__) ((__TRIGGER__) == TIM_SLAVEMODE_TRIGGER)
-
-#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \
- (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\
- ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8U)) :\
- ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\
- ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8U)))
-
-#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \
- (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC) :\
- ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC) :\
- ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC) :\
- ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC))
-
-#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \
- (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\
- ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4U)) :\
- ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8U)) :\
- ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12U))))
-
-#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \
- (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\
- ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\
- ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\
- ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP)))
-
-/**
- * @}
- */
-/* End of private macros -----------------------------------------------------*/
-
-/* Include TIM HAL Extended module */
-#include "stm32f0xx_hal_tim_ex.h"
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup TIM_Exported_Functions TIM Exported Functions
- * @{
- */
-
-/** @addtogroup TIM_Exported_Functions_Group1 TIM Time Base functions
- * @brief Time Base functions
- * @{
- */
-/* Time Base functions ********************************************************/
-HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim);
-HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim);
-void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim);
-void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim);
-/* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim);
-HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim);
-/* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim);
-HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim);
-/* Non-Blocking mode: DMA */
-HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
-HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim);
-/**
- * @}
- */
-
-/** @addtogroup TIM_Exported_Functions_Group2 TIM Output Compare functions
- * @brief TIM Output Compare functions
- * @{
- */
-/* Timer Output Compare functions *********************************************/
-HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim);
-HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim);
-void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim);
-void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim);
-/* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
-HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
-/* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
-HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
-/* Non-Blocking mode: DMA */
-HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
-HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
-/**
- * @}
- */
-
-/** @addtogroup TIM_Exported_Functions_Group3 TIM PWM functions
- * @brief TIM PWM functions
- * @{
- */
-/* Timer PWM functions ********************************************************/
-HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim);
-HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim);
-void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim);
-void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim);
-/* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
-HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
-/* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
-HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
-/* Non-Blocking mode: DMA */
-HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
-HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
-/**
- * @}
- */
-
-/** @addtogroup TIM_Exported_Functions_Group4 TIM Input Capture functions
- * @brief TIM Input Capture functions
- * @{
- */
-/* Timer Input Capture functions **********************************************/
-HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim);
-HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim);
-void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim);
-void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim);
-/* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
-HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
-/* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
-HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
-/* Non-Blocking mode: DMA */
-HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
-HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
-/**
- * @}
- */
-
-/** @addtogroup TIM_Exported_Functions_Group5 TIM One Pulse functions
- * @brief TIM One Pulse functions
- * @{
- */
-/* Timer One Pulse functions **************************************************/
-HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode);
-HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim);
-void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim);
-void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim);
-/* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
-HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
-/* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
-HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
-/**
- * @}
- */
-
-/** @addtogroup TIM_Exported_Functions_Group6 TIM Encoder functions
- * @brief TIM Encoder functions
- * @{
- */
-/* Timer Encoder functions ****************************************************/
-HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef *sConfig);
-HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim);
-void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim);
-void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim);
-/* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
-HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
-/* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
-HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
-/* Non-Blocking mode: DMA */
-HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1,
- uint32_t *pData2, uint16_t Length);
-HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
-/**
- * @}
- */
-
-/** @addtogroup TIM_Exported_Functions_Group7 TIM IRQ handler management
- * @brief IRQ handler management
- * @{
- */
-/* Interrupt Handler functions ***********************************************/
-void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim);
-/**
- * @}
- */
-
-/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions
- * @brief Peripheral Control functions
- * @{
- */
-/* Control functions *********************************************************/
-HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel);
-HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel);
-HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef *sConfig, uint32_t Channel);
-HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig,
- uint32_t OutputChannel, uint32_t InputChannel);
-HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef *sClearInputConfig,
- uint32_t Channel);
-HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef *sClockSourceConfig);
-HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection);
-HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig);
-HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig);
-HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
- uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength);
-HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
- uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength,
- uint32_t DataLength);
-HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
-HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
- uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength);
-HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
- uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength,
- uint32_t DataLength);
-HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
-HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource);
-uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel);
-/**
- * @}
- */
-
-/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions
- * @brief TIM Callbacks functions
- * @{
- */
-/* Callback in non blocking modes (Interrupt and DMA) *************************/
-void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim);
-void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim);
-void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim);
-void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim);
-void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim);
-void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim);
-void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim);
-void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim);
-void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim);
-void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim);
-
-/* Callbacks Register/UnRegister functions ***********************************/
-#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
-HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID,
- pTIM_CallbackTypeDef pCallback);
-HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID);
-#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
-
-/**
- * @}
- */
-
-/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions
- * @brief Peripheral State functions
- * @{
- */
-/* Peripheral State functions ************************************************/
-HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim);
-HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim);
-HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim);
-HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim);
-HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim);
-HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim);
-/**
- * @}
- */
-
-/**
- * @}
- */
-/* End of exported functions -------------------------------------------------*/
-
-/* Private functions----------------------------------------------------------*/
-/** @defgroup TIM_Private_Functions TIM Private Functions
- * @{
- */
-void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure);
-void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter);
-void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
-void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler,
- uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter);
-
-void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma);
-void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma);
-void TIM_DMAError(DMA_HandleTypeDef *hdma);
-void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma);
-void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma);
-void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState);
-
-#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
-void TIM_ResetCallback(TIM_HandleTypeDef *htim);
-#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
-
-/**
- * @}
- */
-/* End of private functions --------------------------------------------------*/
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* STM32F0xx_HAL_TIM_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|