diff options
Diffstat (limited to 'fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_smbus.h')
| -rw-r--r-- | fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_smbus.h | 743 |
1 files changed, 0 insertions, 743 deletions
diff --git a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_smbus.h b/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_smbus.h deleted file mode 100644 index 17939a6..0000000 --- a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_smbus.h +++ /dev/null @@ -1,743 +0,0 @@ -/**
- ******************************************************************************
- * @file stm32f0xx_hal_smbus.h
- * @author MCD Application Team
- * @brief Header file of SMBUS HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef STM32F0xx_HAL_SMBUS_H
-#define STM32F0xx_HAL_SMBUS_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_hal_def.h"
-
-/** @addtogroup STM32F0xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup SMBUS
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup SMBUS_Exported_Types SMBUS Exported Types
- * @{
- */
-
-/** @defgroup SMBUS_Configuration_Structure_definition SMBUS Configuration Structure definition
- * @brief SMBUS Configuration Structure definition
- * @{
- */
-typedef struct
-{
- uint32_t Timing; /*!< Specifies the SMBUS_TIMINGR_register value.
- This parameter calculated by referring to SMBUS initialization
- section in Reference manual */
- uint32_t AnalogFilter; /*!< Specifies if Analog Filter is enable or not.
- This parameter can be a value of @ref SMBUS_Analog_Filter */
-
- uint32_t OwnAddress1; /*!< Specifies the first device own address.
- This parameter can be a 7-bit or 10-bit address. */
-
- uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode for master is selected.
- This parameter can be a value of @ref SMBUS_addressing_mode */
-
- uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
- This parameter can be a value of @ref SMBUS_dual_addressing_mode */
-
- uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
- This parameter can be a 7-bit address. */
-
- uint32_t OwnAddress2Masks; /*!< Specifies the acknoledge mask address second device own address if dual addressing mode is selected
- This parameter can be a value of @ref SMBUS_own_address2_masks. */
-
- uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
- This parameter can be a value of @ref SMBUS_general_call_addressing_mode. */
-
- uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
- This parameter can be a value of @ref SMBUS_nostretch_mode */
-
- uint32_t PacketErrorCheckMode; /*!< Specifies if Packet Error Check mode is selected.
- This parameter can be a value of @ref SMBUS_packet_error_check_mode */
-
- uint32_t PeripheralMode; /*!< Specifies which mode of Periphal is selected.
- This parameter can be a value of @ref SMBUS_peripheral_mode */
-
- uint32_t SMBusTimeout; /*!< Specifies the content of the 32 Bits SMBUS_TIMEOUT_register value.
- (Enable bits and different timeout values)
- This parameter calculated by referring to SMBUS initialization
- section in Reference manual */
-} SMBUS_InitTypeDef;
-/**
- * @}
- */
-
-/** @defgroup HAL_state_definition HAL state definition
- * @brief HAL State definition
- * @{
- */
-#define HAL_SMBUS_STATE_RESET (0x00000000U) /*!< SMBUS not yet initialized or disabled */
-#define HAL_SMBUS_STATE_READY (0x00000001U) /*!< SMBUS initialized and ready for use */
-#define HAL_SMBUS_STATE_BUSY (0x00000002U) /*!< SMBUS internal process is ongoing */
-#define HAL_SMBUS_STATE_MASTER_BUSY_TX (0x00000012U) /*!< Master Data Transmission process is ongoing */
-#define HAL_SMBUS_STATE_MASTER_BUSY_RX (0x00000022U) /*!< Master Data Reception process is ongoing */
-#define HAL_SMBUS_STATE_SLAVE_BUSY_TX (0x00000032U) /*!< Slave Data Transmission process is ongoing */
-#define HAL_SMBUS_STATE_SLAVE_BUSY_RX (0x00000042U) /*!< Slave Data Reception process is ongoing */
-#define HAL_SMBUS_STATE_TIMEOUT (0x00000003U) /*!< Timeout state */
-#define HAL_SMBUS_STATE_ERROR (0x00000004U) /*!< Reception process is ongoing */
-#define HAL_SMBUS_STATE_LISTEN (0x00000008U) /*!< Address Listen Mode is ongoing */
-/**
- * @}
- */
-
-/** @defgroup SMBUS_Error_Code_definition SMBUS Error Code definition
- * @brief SMBUS Error Code definition
- * @{
- */
-#define HAL_SMBUS_ERROR_NONE (0x00000000U) /*!< No error */
-#define HAL_SMBUS_ERROR_BERR (0x00000001U) /*!< BERR error */
-#define HAL_SMBUS_ERROR_ARLO (0x00000002U) /*!< ARLO error */
-#define HAL_SMBUS_ERROR_ACKF (0x00000004U) /*!< ACKF error */
-#define HAL_SMBUS_ERROR_OVR (0x00000008U) /*!< OVR error */
-#define HAL_SMBUS_ERROR_HALTIMEOUT (0x00000010U) /*!< Timeout error */
-#define HAL_SMBUS_ERROR_BUSTIMEOUT (0x00000020U) /*!< Bus Timeout error */
-#define HAL_SMBUS_ERROR_ALERT (0x00000040U) /*!< Alert error */
-#define HAL_SMBUS_ERROR_PECERR (0x00000080U) /*!< PEC error */
-#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1)
-#define HAL_SMBUS_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */
-#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */
-#define HAL_SMBUS_ERROR_INVALID_PARAM (0x00000200U) /*!< Invalid Parameters error */
-/**
- * @}
- */
-
-/** @defgroup SMBUS_handle_Structure_definition SMBUS handle Structure definition
- * @brief SMBUS handle Structure definition
- * @{
- */
-typedef struct __SMBUS_HandleTypeDef
-{
- I2C_TypeDef *Instance; /*!< SMBUS registers base address */
-
- SMBUS_InitTypeDef Init; /*!< SMBUS communication parameters */
-
- uint8_t *pBuffPtr; /*!< Pointer to SMBUS transfer buffer */
-
- uint16_t XferSize; /*!< SMBUS transfer size */
-
- __IO uint16_t XferCount; /*!< SMBUS transfer counter */
-
- __IO uint32_t XferOptions; /*!< SMBUS transfer options */
-
- __IO uint32_t PreviousState; /*!< SMBUS communication Previous state */
-
- HAL_LockTypeDef Lock; /*!< SMBUS locking object */
-
- __IO uint32_t State; /*!< SMBUS communication state */
-
- __IO uint32_t ErrorCode; /*!< SMBUS Error code */
-
-#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1)
- void (* MasterTxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Master Tx Transfer completed callback */
- void (* MasterRxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Master Rx Transfer completed callback */
- void (* SlaveTxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Slave Tx Transfer completed callback */
- void (* SlaveRxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Slave Rx Transfer completed callback */
- void (* ListenCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Listen Complete callback */
- void (* ErrorCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Error callback */
-
- void (* AddrCallback)(struct __SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< SMBUS Slave Address Match callback */
-
- void (* MspInitCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Msp Init callback */
- void (* MspDeInitCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Msp DeInit callback */
-
-#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */
-} SMBUS_HandleTypeDef;
-
-#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1)
-/**
- * @brief HAL SMBUS Callback ID enumeration definition
- */
-typedef enum
-{
- HAL_SMBUS_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< SMBUS Master Tx Transfer completed callback ID */
- HAL_SMBUS_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< SMBUS Master Rx Transfer completed callback ID */
- HAL_SMBUS_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< SMBUS Slave Tx Transfer completed callback ID */
- HAL_SMBUS_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< SMBUS Slave Rx Transfer completed callback ID */
- HAL_SMBUS_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< SMBUS Listen Complete callback ID */
- HAL_SMBUS_ERROR_CB_ID = 0x05U, /*!< SMBUS Error callback ID */
-
- HAL_SMBUS_MSPINIT_CB_ID = 0x06U, /*!< SMBUS Msp Init callback ID */
- HAL_SMBUS_MSPDEINIT_CB_ID = 0x07U /*!< SMBUS Msp DeInit callback ID */
-
-} HAL_SMBUS_CallbackIDTypeDef;
-
-/**
- * @brief HAL SMBUS Callback pointer definition
- */
-typedef void (*pSMBUS_CallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus); /*!< pointer to an SMBUS callback function */
-typedef void (*pSMBUS_AddrCallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< pointer to an SMBUS Address Match callback function */
-
-#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */
-/**
- * @}
- */
-
-/**
- * @}
- */
-/* Exported constants --------------------------------------------------------*/
-
-/** @defgroup SMBUS_Exported_Constants SMBUS Exported Constants
- * @{
- */
-
-/** @defgroup SMBUS_Analog_Filter SMBUS Analog Filter
- * @{
- */
-#define SMBUS_ANALOGFILTER_ENABLE (0x00000000U)
-#define SMBUS_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF
-/**
- * @}
- */
-
-/** @defgroup SMBUS_addressing_mode SMBUS addressing mode
- * @{
- */
-#define SMBUS_ADDRESSINGMODE_7BIT (0x00000001U)
-#define SMBUS_ADDRESSINGMODE_10BIT (0x00000002U)
-/**
- * @}
- */
-
-/** @defgroup SMBUS_dual_addressing_mode SMBUS dual addressing mode
- * @{
- */
-
-#define SMBUS_DUALADDRESS_DISABLE (0x00000000U)
-#define SMBUS_DUALADDRESS_ENABLE I2C_OAR2_OA2EN
-/**
- * @}
- */
-
-/** @defgroup SMBUS_own_address2_masks SMBUS ownaddress2 masks
- * @{
- */
-
-#define SMBUS_OA2_NOMASK ((uint8_t)0x00U)
-#define SMBUS_OA2_MASK01 ((uint8_t)0x01U)
-#define SMBUS_OA2_MASK02 ((uint8_t)0x02U)
-#define SMBUS_OA2_MASK03 ((uint8_t)0x03U)
-#define SMBUS_OA2_MASK04 ((uint8_t)0x04U)
-#define SMBUS_OA2_MASK05 ((uint8_t)0x05U)
-#define SMBUS_OA2_MASK06 ((uint8_t)0x06U)
-#define SMBUS_OA2_MASK07 ((uint8_t)0x07U)
-/**
- * @}
- */
-
-
-/** @defgroup SMBUS_general_call_addressing_mode SMBUS general call addressing mode
- * @{
- */
-#define SMBUS_GENERALCALL_DISABLE (0x00000000U)
-#define SMBUS_GENERALCALL_ENABLE I2C_CR1_GCEN
-/**
- * @}
- */
-
-/** @defgroup SMBUS_nostretch_mode SMBUS nostretch mode
- * @{
- */
-#define SMBUS_NOSTRETCH_DISABLE (0x00000000U)
-#define SMBUS_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH
-/**
- * @}
- */
-
-/** @defgroup SMBUS_packet_error_check_mode SMBUS packet error check mode
- * @{
- */
-#define SMBUS_PEC_DISABLE (0x00000000U)
-#define SMBUS_PEC_ENABLE I2C_CR1_PECEN
-/**
- * @}
- */
-
-/** @defgroup SMBUS_peripheral_mode SMBUS peripheral mode
- * @{
- */
-#define SMBUS_PERIPHERAL_MODE_SMBUS_HOST I2C_CR1_SMBHEN
-#define SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE (0x00000000U)
-#define SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP I2C_CR1_SMBDEN
-/**
- * @}
- */
-
-/** @defgroup SMBUS_ReloadEndMode_definition SMBUS ReloadEndMode definition
- * @{
- */
-
-#define SMBUS_SOFTEND_MODE (0x00000000U)
-#define SMBUS_RELOAD_MODE I2C_CR2_RELOAD
-#define SMBUS_AUTOEND_MODE I2C_CR2_AUTOEND
-#define SMBUS_SENDPEC_MODE I2C_CR2_PECBYTE
-/**
- * @}
- */
-
-/** @defgroup SMBUS_StartStopMode_definition SMBUS StartStopMode definition
- * @{
- */
-
-#define SMBUS_NO_STARTSTOP (0x00000000U)
-#define SMBUS_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP)
-#define SMBUS_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN)
-#define SMBUS_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START)
-/**
- * @}
- */
-
-/** @defgroup SMBUS_XferOptions_definition SMBUS XferOptions definition
- * @{
- */
-
-/* List of XferOptions in usage of :
- * 1- Restart condition when direction change
- * 2- No Restart condition in other use cases
- */
-#define SMBUS_FIRST_FRAME SMBUS_SOFTEND_MODE
-#define SMBUS_NEXT_FRAME ((uint32_t)(SMBUS_RELOAD_MODE | SMBUS_SOFTEND_MODE))
-#define SMBUS_FIRST_AND_LAST_FRAME_NO_PEC SMBUS_AUTOEND_MODE
-#define SMBUS_LAST_FRAME_NO_PEC SMBUS_AUTOEND_MODE
-#define SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC ((uint32_t)(SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE))
-#define SMBUS_LAST_FRAME_WITH_PEC ((uint32_t)(SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE))
-
-/* List of XferOptions in usage of :
- * 1- Restart condition in all use cases (direction change or not)
- */
-#define SMBUS_OTHER_FRAME_NO_PEC (0x000000AAU)
-#define SMBUS_OTHER_FRAME_WITH_PEC (0x0000AA00U)
-#define SMBUS_OTHER_AND_LAST_FRAME_NO_PEC (0x00AA0000U)
-#define SMBUS_OTHER_AND_LAST_FRAME_WITH_PEC (0xAA000000U)
-/**
- * @}
- */
-
-/** @defgroup SMBUS_Interrupt_configuration_definition SMBUS Interrupt configuration definition
- * @brief SMBUS Interrupt definition
- * Elements values convention: 0xXXXXXXXX
- * - XXXXXXXX : Interrupt control mask
- * @{
- */
-#define SMBUS_IT_ERRI I2C_CR1_ERRIE
-#define SMBUS_IT_TCI I2C_CR1_TCIE
-#define SMBUS_IT_STOPI I2C_CR1_STOPIE
-#define SMBUS_IT_NACKI I2C_CR1_NACKIE
-#define SMBUS_IT_ADDRI I2C_CR1_ADDRIE
-#define SMBUS_IT_RXI I2C_CR1_RXIE
-#define SMBUS_IT_TXI I2C_CR1_TXIE
-#define SMBUS_IT_TX (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_STOPI | SMBUS_IT_NACKI | SMBUS_IT_TXI)
-#define SMBUS_IT_RX (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_NACKI | SMBUS_IT_RXI)
-#define SMBUS_IT_ALERT (SMBUS_IT_ERRI)
-#define SMBUS_IT_ADDR (SMBUS_IT_ADDRI | SMBUS_IT_STOPI | SMBUS_IT_NACKI)
-/**
- * @}
- */
-
-/** @defgroup SMBUS_Flag_definition SMBUS Flag definition
- * @brief Flag definition
- * Elements values convention: 0xXXXXYYYY
- * - XXXXXXXX : Flag mask
- * @{
- */
-
-#define SMBUS_FLAG_TXE I2C_ISR_TXE
-#define SMBUS_FLAG_TXIS I2C_ISR_TXIS
-#define SMBUS_FLAG_RXNE I2C_ISR_RXNE
-#define SMBUS_FLAG_ADDR I2C_ISR_ADDR
-#define SMBUS_FLAG_AF I2C_ISR_NACKF
-#define SMBUS_FLAG_STOPF I2C_ISR_STOPF
-#define SMBUS_FLAG_TC I2C_ISR_TC
-#define SMBUS_FLAG_TCR I2C_ISR_TCR
-#define SMBUS_FLAG_BERR I2C_ISR_BERR
-#define SMBUS_FLAG_ARLO I2C_ISR_ARLO
-#define SMBUS_FLAG_OVR I2C_ISR_OVR
-#define SMBUS_FLAG_PECERR I2C_ISR_PECERR
-#define SMBUS_FLAG_TIMEOUT I2C_ISR_TIMEOUT
-#define SMBUS_FLAG_ALERT I2C_ISR_ALERT
-#define SMBUS_FLAG_BUSY I2C_ISR_BUSY
-#define SMBUS_FLAG_DIR I2C_ISR_DIR
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported macros ------------------------------------------------------------*/
-/** @defgroup SMBUS_Exported_Macros SMBUS Exported Macros
- * @{
- */
-
-/** @brief Reset SMBUS handle state.
- * @param __HANDLE__ specifies the SMBUS Handle.
- * @retval None
- */
-#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1)
-#define __HAL_SMBUS_RESET_HANDLE_STATE(__HANDLE__) do{ \
- (__HANDLE__)->State = HAL_SMBUS_STATE_RESET; \
- (__HANDLE__)->MspInitCallback = NULL; \
- (__HANDLE__)->MspDeInitCallback = NULL; \
- } while(0)
-#else
-#define __HAL_SMBUS_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMBUS_STATE_RESET)
-#endif
-
-/** @brief Enable the specified SMBUS interrupts.
- * @param __HANDLE__ specifies the SMBUS Handle.
- * @param __INTERRUPT__ specifies the interrupt source to enable.
- * This parameter can be one of the following values:
- * @arg @ref SMBUS_IT_ERRI Errors interrupt enable
- * @arg @ref SMBUS_IT_TCI Transfer complete interrupt enable
- * @arg @ref SMBUS_IT_STOPI STOP detection interrupt enable
- * @arg @ref SMBUS_IT_NACKI NACK received interrupt enable
- * @arg @ref SMBUS_IT_ADDRI Address match interrupt enable
- * @arg @ref SMBUS_IT_RXI RX interrupt enable
- * @arg @ref SMBUS_IT_TXI TX interrupt enable
- *
- * @retval None
- */
-#define __HAL_SMBUS_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
-
-/** @brief Disable the specified SMBUS interrupts.
- * @param __HANDLE__ specifies the SMBUS Handle.
- * @param __INTERRUPT__ specifies the interrupt source to disable.
- * This parameter can be one of the following values:
- * @arg @ref SMBUS_IT_ERRI Errors interrupt enable
- * @arg @ref SMBUS_IT_TCI Transfer complete interrupt enable
- * @arg @ref SMBUS_IT_STOPI STOP detection interrupt enable
- * @arg @ref SMBUS_IT_NACKI NACK received interrupt enable
- * @arg @ref SMBUS_IT_ADDRI Address match interrupt enable
- * @arg @ref SMBUS_IT_RXI RX interrupt enable
- * @arg @ref SMBUS_IT_TXI TX interrupt enable
- *
- * @retval None
- */
-#define __HAL_SMBUS_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
-
-/** @brief Check whether the specified SMBUS interrupt source is enabled or not.
- * @param __HANDLE__ specifies the SMBUS Handle.
- * @param __INTERRUPT__ specifies the SMBUS interrupt source to check.
- * This parameter can be one of the following values:
- * @arg @ref SMBUS_IT_ERRI Errors interrupt enable
- * @arg @ref SMBUS_IT_TCI Transfer complete interrupt enable
- * @arg @ref SMBUS_IT_STOPI STOP detection interrupt enable
- * @arg @ref SMBUS_IT_NACKI NACK received interrupt enable
- * @arg @ref SMBUS_IT_ADDRI Address match interrupt enable
- * @arg @ref SMBUS_IT_RXI RX interrupt enable
- * @arg @ref SMBUS_IT_TXI TX interrupt enable
- *
- * @retval The new state of __IT__ (SET or RESET).
- */
-#define __HAL_SMBUS_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
-
-/** @brief Check whether the specified SMBUS flag is set or not.
- * @param __HANDLE__ specifies the SMBUS Handle.
- * @param __FLAG__ specifies the flag to check.
- * This parameter can be one of the following values:
- * @arg @ref SMBUS_FLAG_TXE Transmit data register empty
- * @arg @ref SMBUS_FLAG_TXIS Transmit interrupt status
- * @arg @ref SMBUS_FLAG_RXNE Receive data register not empty
- * @arg @ref SMBUS_FLAG_ADDR Address matched (slave mode)
- * @arg @ref SMBUS_FLAG_AF NACK received flag
- * @arg @ref SMBUS_FLAG_STOPF STOP detection flag
- * @arg @ref SMBUS_FLAG_TC Transfer complete (master mode)
- * @arg @ref SMBUS_FLAG_TCR Transfer complete reload
- * @arg @ref SMBUS_FLAG_BERR Bus error
- * @arg @ref SMBUS_FLAG_ARLO Arbitration lost
- * @arg @ref SMBUS_FLAG_OVR Overrun/Underrun
- * @arg @ref SMBUS_FLAG_PECERR PEC error in reception
- * @arg @ref SMBUS_FLAG_TIMEOUT Timeout or Tlow detection flag
- * @arg @ref SMBUS_FLAG_ALERT SMBus alert
- * @arg @ref SMBUS_FLAG_BUSY Bus busy
- * @arg @ref SMBUS_FLAG_DIR Transfer direction (slave mode)
- *
- * @retval The new state of __FLAG__ (SET or RESET).
- */
-#define SMBUS_FLAG_MASK (0x0001FFFFU)
-#define __HAL_SMBUS_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__) & SMBUS_FLAG_MASK)) == ((__FLAG__) & SMBUS_FLAG_MASK)) ? SET : RESET)
-
-/** @brief Clear the SMBUS pending flags which are cleared by writing 1 in a specific bit.
- * @param __HANDLE__ specifies the SMBUS Handle.
- * @param __FLAG__ specifies the flag to clear.
- * This parameter can be any combination of the following values:
- * @arg @ref SMBUS_FLAG_ADDR Address matched (slave mode)
- * @arg @ref SMBUS_FLAG_AF NACK received flag
- * @arg @ref SMBUS_FLAG_STOPF STOP detection flag
- * @arg @ref SMBUS_FLAG_BERR Bus error
- * @arg @ref SMBUS_FLAG_ARLO Arbitration lost
- * @arg @ref SMBUS_FLAG_OVR Overrun/Underrun
- * @arg @ref SMBUS_FLAG_PECERR PEC error in reception
- * @arg @ref SMBUS_FLAG_TIMEOUT Timeout or Tlow detection flag
- * @arg @ref SMBUS_FLAG_ALERT SMBus alert
- *
- * @retval None
- */
-#define __HAL_SMBUS_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
-
-/** @brief Enable the specified SMBUS peripheral.
- * @param __HANDLE__ specifies the SMBUS Handle.
- * @retval None
- */
-#define __HAL_SMBUS_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
-
-/** @brief Disable the specified SMBUS peripheral.
- * @param __HANDLE__ specifies the SMBUS Handle.
- * @retval None
- */
-#define __HAL_SMBUS_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
-
-/** @brief Generate a Non-Acknowledge SMBUS peripheral in Slave mode.
- * @param __HANDLE__ specifies the SMBUS Handle.
- * @retval None
- */
-#define __HAL_SMBUS_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK))
-
-/**
- * @}
- */
-
-
-/* Private constants ---------------------------------------------------------*/
-
-/* Private macros ------------------------------------------------------------*/
-/** @defgroup SMBUS_Private_Macro SMBUS Private Macros
- * @{
- */
-
-#define IS_SMBUS_ANALOG_FILTER(FILTER) (((FILTER) == SMBUS_ANALOGFILTER_ENABLE) || \
- ((FILTER) == SMBUS_ANALOGFILTER_DISABLE))
-
-#define IS_SMBUS_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU)
-
-#define IS_SMBUS_ADDRESSING_MODE(MODE) (((MODE) == SMBUS_ADDRESSINGMODE_7BIT) || \
- ((MODE) == SMBUS_ADDRESSINGMODE_10BIT))
-
-#define IS_SMBUS_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == SMBUS_DUALADDRESS_DISABLE) || \
- ((ADDRESS) == SMBUS_DUALADDRESS_ENABLE))
-
-#define IS_SMBUS_OWN_ADDRESS2_MASK(MASK) (((MASK) == SMBUS_OA2_NOMASK) || \
- ((MASK) == SMBUS_OA2_MASK01) || \
- ((MASK) == SMBUS_OA2_MASK02) || \
- ((MASK) == SMBUS_OA2_MASK03) || \
- ((MASK) == SMBUS_OA2_MASK04) || \
- ((MASK) == SMBUS_OA2_MASK05) || \
- ((MASK) == SMBUS_OA2_MASK06) || \
- ((MASK) == SMBUS_OA2_MASK07))
-
-#define IS_SMBUS_GENERAL_CALL(CALL) (((CALL) == SMBUS_GENERALCALL_DISABLE) || \
- ((CALL) == SMBUS_GENERALCALL_ENABLE))
-
-#define IS_SMBUS_NO_STRETCH(STRETCH) (((STRETCH) == SMBUS_NOSTRETCH_DISABLE) || \
- ((STRETCH) == SMBUS_NOSTRETCH_ENABLE))
-
-#define IS_SMBUS_PEC(PEC) (((PEC) == SMBUS_PEC_DISABLE) || \
- ((PEC) == SMBUS_PEC_ENABLE))
-
-#define IS_SMBUS_PERIPHERAL_MODE(MODE) (((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_HOST) || \
- ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE) || \
- ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP))
-
-#define IS_SMBUS_TRANSFER_MODE(MODE) (((MODE) == SMBUS_RELOAD_MODE) || \
- ((MODE) == SMBUS_AUTOEND_MODE) || \
- ((MODE) == SMBUS_SOFTEND_MODE) || \
- ((MODE) == SMBUS_SENDPEC_MODE) || \
- ((MODE) == (SMBUS_RELOAD_MODE | SMBUS_SENDPEC_MODE)) || \
- ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE)) || \
- ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_RELOAD_MODE)) || \
- ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE | SMBUS_RELOAD_MODE )))
-
-
-#define IS_SMBUS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == SMBUS_GENERATE_STOP) || \
- ((REQUEST) == SMBUS_GENERATE_START_READ) || \
- ((REQUEST) == SMBUS_GENERATE_START_WRITE) || \
- ((REQUEST) == SMBUS_NO_STARTSTOP))
-
-
-#define IS_SMBUS_TRANSFER_OPTIONS_REQUEST(REQUEST) (IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) || \
- ((REQUEST) == SMBUS_FIRST_FRAME) || \
- ((REQUEST) == SMBUS_NEXT_FRAME) || \
- ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_NO_PEC) || \
- ((REQUEST) == SMBUS_LAST_FRAME_NO_PEC) || \
- ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC) || \
- ((REQUEST) == SMBUS_LAST_FRAME_WITH_PEC))
-
-#define IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == SMBUS_OTHER_FRAME_NO_PEC) || \
- ((REQUEST) == SMBUS_OTHER_AND_LAST_FRAME_NO_PEC) || \
- ((REQUEST) == SMBUS_OTHER_FRAME_WITH_PEC) || \
- ((REQUEST) == SMBUS_OTHER_AND_LAST_FRAME_WITH_PEC))
-
-#define SMBUS_RESET_CR1(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (uint32_t)~((uint32_t)(I2C_CR1_SMBHEN | I2C_CR1_SMBDEN | I2C_CR1_PECEN)))
-#define SMBUS_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN)))
-
-#define SMBUS_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == SMBUS_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \
- (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN)))
-
-#define SMBUS_GET_ADDR_MATCH(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 17U)
-#define SMBUS_GET_DIR(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16U)
-#define SMBUS_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND)
-#define SMBUS_GET_PEC_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_PECBYTE)
-#define SMBUS_GET_ALERT_ENABLED(__HANDLE__) ((__HANDLE__)->Instance->CR1 & I2C_CR1_ALERTEN)
-
-#define SMBUS_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & SMBUS_FLAG_MASK)) == ((__FLAG__) & SMBUS_FLAG_MASK)) ? SET : RESET)
-#define SMBUS_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET)
-
-#define IS_SMBUS_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU)
-#define IS_SMBUS_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU)
-
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup SMBUS_Exported_Functions SMBUS Exported Functions
- * @{
- */
-
-/** @addtogroup SMBUS_Exported_Functions_Group1 Initialization and de-initialization functions
- * @{
- */
-
-/* Initialization and de-initialization functions ****************************/
-HAL_StatusTypeDef HAL_SMBUS_Init(SMBUS_HandleTypeDef *hsmbus);
-HAL_StatusTypeDef HAL_SMBUS_DeInit(SMBUS_HandleTypeDef *hsmbus);
-void HAL_SMBUS_MspInit(SMBUS_HandleTypeDef *hsmbus);
-void HAL_SMBUS_MspDeInit(SMBUS_HandleTypeDef *hsmbus);
-HAL_StatusTypeDef HAL_SMBUS_ConfigAnalogFilter(SMBUS_HandleTypeDef *hsmbus, uint32_t AnalogFilter);
-HAL_StatusTypeDef HAL_SMBUS_ConfigDigitalFilter(SMBUS_HandleTypeDef *hsmbus, uint32_t DigitalFilter);
-
-/* Callbacks Register/UnRegister functions ***********************************/
-#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1)
-HAL_StatusTypeDef HAL_SMBUS_RegisterCallback(SMBUS_HandleTypeDef *hsmbus, HAL_SMBUS_CallbackIDTypeDef CallbackID, pSMBUS_CallbackTypeDef pCallback);
-HAL_StatusTypeDef HAL_SMBUS_UnRegisterCallback(SMBUS_HandleTypeDef *hsmbus, HAL_SMBUS_CallbackIDTypeDef CallbackID);
-
-HAL_StatusTypeDef HAL_SMBUS_RegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus, pSMBUS_AddrCallbackTypeDef pCallback);
-HAL_StatusTypeDef HAL_SMBUS_UnRegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus);
-#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */
-/**
- * @}
- */
-
-/** @addtogroup SMBUS_Exported_Functions_Group2 Input and Output operation functions
- * @{
- */
-
-/* IO operation functions *****************************************************/
-/** @addtogroup Blocking_mode_Polling Blocking mode Polling
- * @{
- */
-/******* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_SMBUS_IsDeviceReady(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
-/**
- * @}
- */
-
-/** @addtogroup Non-Blocking_mode_Interrupt Non-Blocking mode Interrupt
- * @{
- */
-/******* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_SMBUS_Master_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
-HAL_StatusTypeDef HAL_SMBUS_Master_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
-HAL_StatusTypeDef HAL_SMBUS_Master_Abort_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress);
-HAL_StatusTypeDef HAL_SMBUS_Slave_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
-HAL_StatusTypeDef HAL_SMBUS_Slave_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
-
-HAL_StatusTypeDef HAL_SMBUS_EnableAlert_IT(SMBUS_HandleTypeDef *hsmbus);
-HAL_StatusTypeDef HAL_SMBUS_DisableAlert_IT(SMBUS_HandleTypeDef *hsmbus);
-HAL_StatusTypeDef HAL_SMBUS_EnableListen_IT(SMBUS_HandleTypeDef *hsmbus);
-HAL_StatusTypeDef HAL_SMBUS_DisableListen_IT(SMBUS_HandleTypeDef *hsmbus);
-/**
- * @}
- */
-
-/** @addtogroup SMBUS_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
- * @{
- */
-/******* SMBUS IRQHandler and Callbacks used in non blocking modes (Interrupt) */
-void HAL_SMBUS_EV_IRQHandler(SMBUS_HandleTypeDef *hsmbus);
-void HAL_SMBUS_ER_IRQHandler(SMBUS_HandleTypeDef *hsmbus);
-void HAL_SMBUS_MasterTxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
-void HAL_SMBUS_MasterRxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
-void HAL_SMBUS_SlaveTxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
-void HAL_SMBUS_SlaveRxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
-void HAL_SMBUS_AddrCallback(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode);
-void HAL_SMBUS_ListenCpltCallback(SMBUS_HandleTypeDef *hsmbus);
-void HAL_SMBUS_ErrorCallback(SMBUS_HandleTypeDef *hsmbus);
-
-/**
- * @}
- */
-
-/** @addtogroup SMBUS_Exported_Functions_Group3 Peripheral State and Errors functions
- * @{
- */
-
-/* Peripheral State and Errors functions **************************************************/
-uint32_t HAL_SMBUS_GetState(SMBUS_HandleTypeDef *hsmbus);
-uint32_t HAL_SMBUS_GetError(SMBUS_HandleTypeDef *hsmbus);
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Private Functions ---------------------------------------------------------*/
-/** @defgroup SMBUS_Private_Functions SMBUS Private Functions
- * @{
- */
-/* Private functions are defined in stm32f0xx_hal_smbus.c file */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif /* STM32F0xx_HAL_SMBUS_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|