diff options
Diffstat (limited to 'fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_smartcard.h')
| -rw-r--r-- | fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_smartcard.h | 1021 |
1 files changed, 0 insertions, 1021 deletions
diff --git a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_smartcard.h b/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_smartcard.h deleted file mode 100644 index cc82e76..0000000 --- a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_smartcard.h +++ /dev/null @@ -1,1021 +0,0 @@ -/**
- ******************************************************************************
- * @file stm32f0xx_hal_smartcard.h
- * @author MCD Application Team
- * @brief Header file of SMARTCARD HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef STM32F0xx_HAL_SMARTCARD_H
-#define STM32F0xx_HAL_SMARTCARD_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_hal_def.h"
-
-/** @addtogroup STM32F0xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup SMARTCARD
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types
- * @{
- */
-
-/**
- * @brief SMARTCARD Init Structure definition
- */
-typedef struct
-{
- uint32_t BaudRate; /*!< Configures the SmartCard communication baud rate.
- The baud rate register is computed using the following formula:
- Baud Rate Register = ((usart_ker_ckpres) / ((hsmartcard->Init.BaudRate)))
- where usart_ker_ckpres is the USART input clock divided by a prescaler */
-
- uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
- This parameter @ref SMARTCARD_Word_Length can only be set to 9 (8 data + 1 parity bits). */
-
- uint32_t StopBits; /*!< Specifies the number of stop bits.
- This parameter can be a value of @ref SMARTCARD_Stop_Bits. */
-
- uint16_t Parity; /*!< Specifies the parity mode.
- This parameter can be a value of @ref SMARTCARD_Parity
- @note The parity is enabled by default (PCE is forced to 1).
- Since the WordLength is forced to 8 bits + parity, M is
- forced to 1 and the parity bit is the 9th bit. */
-
- uint16_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
- This parameter can be a value of @ref SMARTCARD_Mode */
-
- uint16_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
- This parameter can be a value of @ref SMARTCARD_Clock_Polarity */
-
- uint16_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
- This parameter can be a value of @ref SMARTCARD_Clock_Phase */
-
- uint16_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
- data bit (MSB) has to be output on the SCLK pin in synchronous mode.
- This parameter can be a value of @ref SMARTCARD_Last_Bit */
-
- uint16_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected.
- Selecting the single sample method increases the receiver tolerance to clock
- deviations. This parameter can be a value of @ref SMARTCARD_OneBit_Sampling. */
-
- uint8_t Prescaler; /*!< Specifies the SmartCard Prescaler.
- This parameter can be any value from 0x01 to 0x1F. Prescaler value is multiplied
- by 2 to give the division factor of the source clock frequency */
-
- uint8_t GuardTime; /*!< Specifies the SmartCard Guard Time applied after stop bits. */
-
- uint16_t NACKEnable; /*!< Specifies whether the SmartCard NACK transmission is enabled
- in case of parity error.
- This parameter can be a value of @ref SMARTCARD_NACK_Enable */
-
- uint32_t TimeOutEnable; /*!< Specifies whether the receiver timeout is enabled.
- This parameter can be a value of @ref SMARTCARD_Timeout_Enable*/
-
- uint32_t TimeOutValue; /*!< Specifies the receiver time out value in number of baud blocks:
- it is used to implement the Character Wait Time (CWT) and
- Block Wait Time (BWT). It is coded over 24 bits. */
-
- uint8_t BlockLength; /*!< Specifies the SmartCard Block Length in T=1 Reception mode.
- This parameter can be any value from 0x0 to 0xFF */
-
- uint8_t AutoRetryCount; /*!< Specifies the SmartCard auto-retry count (number of retries in
- receive and transmit mode). When set to 0, retransmission is
- disabled. Otherwise, its maximum value is 7 (before signalling
- an error) */
-
-} SMARTCARD_InitTypeDef;
-
-/**
- * @brief SMARTCARD advanced features initalization structure definition
- */
-typedef struct
-{
- uint32_t AdvFeatureInit; /*!< Specifies which advanced SMARTCARD features is initialized. Several
- advanced features may be initialized at the same time. This parameter
- can be a value of @ref SMARTCARDEx_Advanced_Features_Initialization_Type */
-
- uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted.
- This parameter can be a value of @ref SMARTCARD_Tx_Inv */
-
- uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted.
- This parameter can be a value of @ref SMARTCARD_Rx_Inv */
-
- uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic
- vs negative/inverted logic).
- This parameter can be a value of @ref SMARTCARD_Data_Inv */
-
- uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped.
- This parameter can be a value of @ref SMARTCARD_Rx_Tx_Swap */
-
- uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled.
- This parameter can be a value of @ref SMARTCARD_Overrun_Disable */
-
- uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error.
- This parameter can be a value of @ref SMARTCARD_DMA_Disable_on_Rx_Error */
-
- uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line.
- This parameter can be a value of @ref SMARTCARD_MSB_First */
-
- uint16_t TxCompletionIndication; /*!< Specifies which transmission completion indication is used: before (when
- relevant flag is available) or once guard time period has elapsed.
- This parameter can be a value of @ref SMARTCARDEx_Transmission_Completion_Indication. */
-} SMARTCARD_AdvFeatureInitTypeDef;
-
-/**
- * @brief HAL SMARTCARD State definition
- * @note HAL SMARTCARD State value is a combination of 2 different substates: gState and RxState (see @ref SMARTCARD_State_Definition).
- * - gState contains SMARTCARD state information related to global Handle management
- * and also information related to Tx operations.
- * gState value coding follow below described bitmap :
- * b7-b6 Error information
- * 00 : No Error
- * 01 : (Not Used)
- * 10 : Timeout
- * 11 : Error
- * b5 Peripheral initialization status
- * 0 : Reset (Peripheral not initialized)
- * 1 : Init done (Peripheral not initialized. HAL SMARTCARD Init function already called)
- * b4-b3 (not used)
- * xx : Should be set to 00
- * b2 Intrinsic process state
- * 0 : Ready
- * 1 : Busy (Peripheral busy with some configuration or internal operations)
- * b1 (not used)
- * x : Should be set to 0
- * b0 Tx state
- * 0 : Ready (no Tx operation ongoing)
- * 1 : Busy (Tx operation ongoing)
- * - RxState contains information related to Rx operations.
- * RxState value coding follow below described bitmap :
- * b7-b6 (not used)
- * xx : Should be set to 00
- * b5 Peripheral initialization status
- * 0 : Reset (Peripheral not initialized)
- * 1 : Init done (Peripheral not initialized)
- * b4-b2 (not used)
- * xxx : Should be set to 000
- * b1 Rx state
- * 0 : Ready (no Rx operation ongoing)
- * 1 : Busy (Rx operation ongoing)
- * b0 (not used)
- * x : Should be set to 0.
- */
-typedef uint32_t HAL_SMARTCARD_StateTypeDef;
-
-/**
- * @brief SMARTCARD handle Structure definition
- */
-typedef struct __SMARTCARD_HandleTypeDef
-{
- USART_TypeDef *Instance; /*!< USART registers base address */
-
- SMARTCARD_InitTypeDef Init; /*!< SmartCard communication parameters */
-
- SMARTCARD_AdvFeatureInitTypeDef AdvancedInit; /*!< SmartCard advanced features initialization parameters */
-
- uint8_t *pTxBuffPtr; /*!< Pointer to SmartCard Tx transfer Buffer */
-
- uint16_t TxXferSize; /*!< SmartCard Tx Transfer size */
-
- __IO uint16_t TxXferCount; /*!< SmartCard Tx Transfer Counter */
-
- uint8_t *pRxBuffPtr; /*!< Pointer to SmartCard Rx transfer Buffer */
-
- uint16_t RxXferSize; /*!< SmartCard Rx Transfer size */
-
- __IO uint16_t RxXferCount; /*!< SmartCard Rx Transfer Counter */
-
-
- void (*RxISR)(struct __SMARTCARD_HandleTypeDef *huart); /*!< Function pointer on Rx IRQ handler */
-
- void (*TxISR)(struct __SMARTCARD_HandleTypeDef *huart); /*!< Function pointer on Tx IRQ handler */
-
- DMA_HandleTypeDef *hdmatx; /*!< SmartCard Tx DMA Handle parameters */
-
- DMA_HandleTypeDef *hdmarx; /*!< SmartCard Rx DMA Handle parameters */
-
- HAL_LockTypeDef Lock; /*!< Locking object */
-
- __IO HAL_SMARTCARD_StateTypeDef gState; /*!< SmartCard state information related to global Handle management
- and also related to Tx operations.
- This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */
-
- __IO HAL_SMARTCARD_StateTypeDef RxState; /*!< SmartCard state information related to Rx operations.
- This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */
-
- __IO uint32_t ErrorCode; /*!< SmartCard Error code */
-
-#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
- void (* TxCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Tx Complete Callback */
-
- void (* RxCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Rx Complete Callback */
-
- void (* ErrorCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Error Callback */
-
- void (* AbortCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Abort Complete Callback */
-
- void (* AbortTransmitCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Abort Transmit Complete Callback */
-
- void (* AbortReceiveCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Abort Receive Complete Callback */
-
- void (* MspInitCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Msp Init callback */
-
- void (* MspDeInitCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Msp DeInit callback */
-#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */
-
-} SMARTCARD_HandleTypeDef;
-
-#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
-/**
- * @brief HAL SMARTCARD Callback ID enumeration definition
- */
-typedef enum
-{
- HAL_SMARTCARD_TX_COMPLETE_CB_ID = 0x00U, /*!< SMARTCARD Tx Complete Callback ID */
- HAL_SMARTCARD_RX_COMPLETE_CB_ID = 0x01U, /*!< SMARTCARD Rx Complete Callback ID */
- HAL_SMARTCARD_ERROR_CB_ID = 0x02U, /*!< SMARTCARD Error Callback ID */
- HAL_SMARTCARD_ABORT_COMPLETE_CB_ID = 0x03U, /*!< SMARTCARD Abort Complete Callback ID */
- HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x04U, /*!< SMARTCARD Abort Transmit Complete Callback ID */
- HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID = 0x05U, /*!< SMARTCARD Abort Receive Complete Callback ID */
-
- HAL_SMARTCARD_MSPINIT_CB_ID = 0x08U, /*!< SMARTCARD MspInit callback ID */
- HAL_SMARTCARD_MSPDEINIT_CB_ID = 0x09U /*!< SMARTCARD MspDeInit callback ID */
-
-} HAL_SMARTCARD_CallbackIDTypeDef;
-
-/**
- * @brief HAL SMARTCARD Callback pointer definition
- */
-typedef void (*pSMARTCARD_CallbackTypeDef)(SMARTCARD_HandleTypeDef *hsmartcard); /*!< pointer to an SMARTCARD callback function */
-
-#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */
-
-/**
- * @brief SMARTCARD clock sources
- */
-typedef enum
-{
- SMARTCARD_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */
- SMARTCARD_CLOCKSOURCE_HSI = 0x02U, /*!< HSI clock source */
- SMARTCARD_CLOCKSOURCE_SYSCLK = 0x04U, /*!< SYSCLK clock source */
- SMARTCARD_CLOCKSOURCE_LSE = 0x08U, /*!< LSE clock source */
- SMARTCARD_CLOCKSOURCE_UNDEFINED = 0x10U /*!< undefined clock source */
-} SMARTCARD_ClockSourceTypeDef;
-
-/**
- * @}
- */
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup SMARTCARD_Exported_Constants SMARTCARD Exported Constants
- * @{
- */
-
-/** @defgroup SMARTCARD_State_Definition SMARTCARD State Code Definition
- * @{
- */
-#define HAL_SMARTCARD_STATE_RESET 0x00000000U /*!< Peripheral is not initialized
- Value is allowed for gState and RxState */
-#define HAL_SMARTCARD_STATE_READY 0x00000020U /*!< Peripheral Initialized and ready for use
- Value is allowed for gState and RxState */
-#define HAL_SMARTCARD_STATE_BUSY 0x00000024U /*!< an internal process is ongoing
- Value is allowed for gState only */
-#define HAL_SMARTCARD_STATE_BUSY_TX 0x00000021U /*!< Data Transmission process is ongoing
- Value is allowed for gState only */
-#define HAL_SMARTCARD_STATE_BUSY_RX 0x00000022U /*!< Data Reception process is ongoing
- Value is allowed for RxState only */
-#define HAL_SMARTCARD_STATE_BUSY_TX_RX 0x00000023U /*!< Data Transmission and Reception process is ongoing
- Not to be used for neither gState nor RxState.
- Value is result of combination (Or) between gState and RxState values */
-#define HAL_SMARTCARD_STATE_TIMEOUT 0x000000A0U /*!< Timeout state
- Value is allowed for gState only */
-#define HAL_SMARTCARD_STATE_ERROR 0x000000E0U /*!< Error
- Value is allowed for gState only */
-/**
- * @}
- */
-
-/** @defgroup SMARTCARD_Error_Definition SMARTCARD Error Code Definition
- * @{
- */
-#define HAL_SMARTCARD_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
-#define HAL_SMARTCARD_ERROR_PE ((uint32_t)0x00000001U) /*!< Parity error */
-#define HAL_SMARTCARD_ERROR_NE ((uint32_t)0x00000002U) /*!< Noise error */
-#define HAL_SMARTCARD_ERROR_FE ((uint32_t)0x00000004U) /*!< frame error */
-#define HAL_SMARTCARD_ERROR_ORE ((uint32_t)0x00000008U) /*!< Overrun error */
-#define HAL_SMARTCARD_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */
-#define HAL_SMARTCARD_ERROR_RTO ((uint32_t)0x00000020U) /*!< Receiver TimeOut error */
-#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
-#define HAL_SMARTCARD_ERROR_INVALID_CALLBACK ((uint32_t)0x00000040U) /*!< Invalid Callback error */
-#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */
-/**
- * @}
- */
-
-/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length
- * @{
- */
-#if defined(USART_CR1_M0)
-#define SMARTCARD_WORDLENGTH_9B USART_CR1_M0 /*!< SMARTCARD frame length */
-#else
-#define SMARTCARD_WORDLENGTH_9B USART_CR1_M /*!< SMARTCARD frame length */
-#endif /* USART_CR1_M0 */
-/**
- * @}
- */
-
-/** @defgroup SMARTCARD_Stop_Bits SMARTCARD Number of Stop Bits
- * @{
- */
-#define SMARTCARD_STOPBITS_0_5 USART_CR2_STOP_0 /*!< SMARTCARD frame with 0.5 stop bit */
-#define SMARTCARD_STOPBITS_1_5 USART_CR2_STOP /*!< SMARTCARD frame with 1.5 stop bits */
-/**
- * @}
- */
-
-/** @defgroup SMARTCARD_Parity SMARTCARD Parity
- * @{
- */
-#define SMARTCARD_PARITY_EVEN USART_CR1_PCE /*!< SMARTCARD frame even parity */
-#define SMARTCARD_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< SMARTCARD frame odd parity */
-/**
- * @}
- */
-
-/** @defgroup SMARTCARD_Mode SMARTCARD Transfer Mode
- * @{
- */
-#define SMARTCARD_MODE_RX USART_CR1_RE /*!< SMARTCARD RX mode */
-#define SMARTCARD_MODE_TX USART_CR1_TE /*!< SMARTCARD TX mode */
-#define SMARTCARD_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< SMARTCARD RX and TX mode */
-/**
- * @}
- */
-
-/** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity
- * @{
- */
-#define SMARTCARD_POLARITY_LOW 0x00000000U /*!< SMARTCARD frame low polarity */
-#define SMARTCARD_POLARITY_HIGH USART_CR2_CPOL /*!< SMARTCARD frame high polarity */
-/**
- * @}
- */
-
-/** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase
- * @{
- */
-#define SMARTCARD_PHASE_1EDGE 0x00000000U /*!< SMARTCARD frame phase on first clock transition */
-#define SMARTCARD_PHASE_2EDGE USART_CR2_CPHA /*!< SMARTCARD frame phase on second clock transition */
-/**
- * @}
- */
-
-/** @defgroup SMARTCARD_Last_Bit SMARTCARD Last Bit
- * @{
- */
-#define SMARTCARD_LASTBIT_DISABLE 0x00000000U /*!< SMARTCARD frame last data bit clock pulse not output to SCLK pin */
-#define SMARTCARD_LASTBIT_ENABLE USART_CR2_LBCL /*!< SMARTCARD frame last data bit clock pulse output to SCLK pin */
-/**
- * @}
- */
-
-/** @defgroup SMARTCARD_OneBit_Sampling SMARTCARD One Bit Sampling Method
- * @{
- */
-#define SMARTCARD_ONE_BIT_SAMPLE_DISABLE 0x00000000U /*!< SMARTCARD frame one-bit sample disabled */
-#define SMARTCARD_ONE_BIT_SAMPLE_ENABLE USART_CR3_ONEBIT /*!< SMARTCARD frame one-bit sample enabled */
-/**
- * @}
- */
-
-/** @defgroup SMARTCARD_NACK_Enable SMARTCARD NACK Enable
- * @{
- */
-#define SMARTCARD_NACK_DISABLE 0x00000000U /*!< SMARTCARD NACK transmission disabled */
-#define SMARTCARD_NACK_ENABLE USART_CR3_NACK /*!< SMARTCARD NACK transmission enabled */
-/**
- * @}
- */
-
-/** @defgroup SMARTCARD_Timeout_Enable SMARTCARD Timeout Enable
- * @{
- */
-#define SMARTCARD_TIMEOUT_DISABLE 0x00000000U /*!< SMARTCARD receiver timeout disabled */
-#define SMARTCARD_TIMEOUT_ENABLE USART_CR2_RTOEN /*!< SMARTCARD receiver timeout enabled */
-/**
- * @}
- */
-
-/** @defgroup SMARTCARD_Tx_Inv SMARTCARD advanced feature TX pin active level inversion
- * @{
- */
-#define SMARTCARD_ADVFEATURE_TXINV_DISABLE 0x00000000U /*!< TX pin active level inversion disable */
-#define SMARTCARD_ADVFEATURE_TXINV_ENABLE USART_CR2_TXINV /*!< TX pin active level inversion enable */
-/**
- * @}
- */
-
-/** @defgroup SMARTCARD_Rx_Inv SMARTCARD advanced feature RX pin active level inversion
- * @{
- */
-#define SMARTCARD_ADVFEATURE_RXINV_DISABLE 0x00000000U /*!< RX pin active level inversion disable */
-#define SMARTCARD_ADVFEATURE_RXINV_ENABLE USART_CR2_RXINV /*!< RX pin active level inversion enable */
-/**
- * @}
- */
-
-/** @defgroup SMARTCARD_Data_Inv SMARTCARD advanced feature Binary Data inversion
- * @{
- */
-#define SMARTCARD_ADVFEATURE_DATAINV_DISABLE 0x00000000U /*!< Binary data inversion disable */
-#define SMARTCARD_ADVFEATURE_DATAINV_ENABLE USART_CR2_DATAINV /*!< Binary data inversion enable */
-/**
- * @}
- */
-
-/** @defgroup SMARTCARD_Rx_Tx_Swap SMARTCARD advanced feature RX TX pins swap
- * @{
- */
-#define SMARTCARD_ADVFEATURE_SWAP_DISABLE 0x00000000U /*!< TX/RX pins swap disable */
-#define SMARTCARD_ADVFEATURE_SWAP_ENABLE USART_CR2_SWAP /*!< TX/RX pins swap enable */
-/**
- * @}
- */
-
-/** @defgroup SMARTCARD_Overrun_Disable SMARTCARD advanced feature Overrun Disable
- * @{
- */
-#define SMARTCARD_ADVFEATURE_OVERRUN_ENABLE 0x00000000U /*!< RX overrun enable */
-#define SMARTCARD_ADVFEATURE_OVERRUN_DISABLE USART_CR3_OVRDIS /*!< RX overrun disable */
-/**
- * @}
- */
-
-/** @defgroup SMARTCARD_DMA_Disable_on_Rx_Error SMARTCARD advanced feature DMA Disable on Rx Error
- * @{
- */
-#define SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR 0x00000000U /*!< DMA enable on Reception Error */
-#define SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR USART_CR3_DDRE /*!< DMA disable on Reception Error */
-/**
- * @}
- */
-
-/** @defgroup SMARTCARD_MSB_First SMARTCARD advanced feature MSB first
- * @{
- */
-#define SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE 0x00000000U /*!< Most significant bit sent/received first disable */
-#define SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE USART_CR2_MSBFIRST /*!< Most significant bit sent/received first enable */
-/**
- * @}
- */
-
-/** @defgroup SMARTCARD_Request_Parameters SMARTCARD Request Parameters
- * @{
- */
-#define SMARTCARD_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive data flush request */
-#define SMARTCARD_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush request */
-/**
- * @}
- */
-
-/** @defgroup SMARTCARD_Interruption_Mask SMARTCARD interruptions flags mask
- * @{
- */
-#define SMARTCARD_IT_MASK 0x001FU /*!< SMARTCARD interruptions flags mask */
-#define SMARTCARD_CR_MASK 0x00E0U /*!< SMARTCARD control register mask */
-#define SMARTCARD_CR_POS 5U /*!< SMARTCARD control register position */
-#define SMARTCARD_ISR_MASK 0x1F00U /*!< SMARTCARD ISR register mask */
-#define SMARTCARD_ISR_POS 8U /*!< SMARTCARD ISR register position */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported macros -----------------------------------------------------------*/
-/** @defgroup SMARTCARD_Exported_Macros SMARTCARD Exported Macros
- * @{
- */
-
-/** @brief Reset SMARTCARD handle states.
- * @param __HANDLE__ SMARTCARD handle.
- * @retval None
- */
-#if USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1
-#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \
- (__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \
- (__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \
- (__HANDLE__)->MspInitCallback = NULL; \
- (__HANDLE__)->MspDeInitCallback = NULL; \
- } while(0U)
-#else
-#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \
- (__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \
- (__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \
- } while(0U)
-#endif /*USE_HAL_SMARTCARD_REGISTER_CALLBACKS */
-
-/** @brief Flush the Smartcard Data registers.
- * @param __HANDLE__ specifies the SMARTCARD Handle.
- * @retval None
- */
-#define __HAL_SMARTCARD_FLUSH_DRREGISTER(__HANDLE__) \
- do{ \
- SET_BIT((__HANDLE__)->Instance->RQR, SMARTCARD_RXDATA_FLUSH_REQUEST); \
- SET_BIT((__HANDLE__)->Instance->RQR, SMARTCARD_TXDATA_FLUSH_REQUEST); \
- } while(0U)
-
-/** @brief Clear the specified SMARTCARD pending flag.
- * @param __HANDLE__ specifies the SMARTCARD Handle.
- * @param __FLAG__ specifies the flag to check.
- * This parameter can be any combination of the following values:
- * @arg @ref SMARTCARD_CLEAR_PEF Parity error clear flag
- * @arg @ref SMARTCARD_CLEAR_FEF Framing error clear flag
- * @arg @ref SMARTCARD_CLEAR_NEF Noise detected clear flag
- * @arg @ref SMARTCARD_CLEAR_OREF OverRun error clear flag
- * @arg @ref SMARTCARD_CLEAR_IDLEF Idle line detected clear flag
- * @arg @ref SMARTCARD_CLEAR_TCF Transmission complete clear flag
- * @arg @ref SMARTCARD_CLEAR_TCBGTF Transmission complete before guard time clear flag
- * @arg @ref SMARTCARD_CLEAR_RTOF Receiver timeout clear flag
- * @arg @ref SMARTCARD_CLEAR_EOBF End of block clear flag
- * @retval None
- */
-#define __HAL_SMARTCARD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
-
-/** @brief Clear the SMARTCARD PE pending flag.
- * @param __HANDLE__ specifies the SMARTCARD Handle.
- * @retval None
- */
-#define __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_PEF)
-
-/** @brief Clear the SMARTCARD FE pending flag.
- * @param __HANDLE__ specifies the SMARTCARD Handle.
- * @retval None
- */
-#define __HAL_SMARTCARD_CLEAR_FEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_FEF)
-
-/** @brief Clear the SMARTCARD NE pending flag.
- * @param __HANDLE__ specifies the SMARTCARD Handle.
- * @retval None
- */
-#define __HAL_SMARTCARD_CLEAR_NEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_NEF)
-
-/** @brief Clear the SMARTCARD ORE pending flag.
- * @param __HANDLE__ specifies the SMARTCARD Handle.
- * @retval None
- */
-#define __HAL_SMARTCARD_CLEAR_OREFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_OREF)
-
-/** @brief Clear the SMARTCARD IDLE pending flag.
- * @param __HANDLE__ specifies the SMARTCARD Handle.
- * @retval None
- */
-#define __HAL_SMARTCARD_CLEAR_IDLEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_IDLEF)
-
-/** @brief Check whether the specified Smartcard flag is set or not.
- * @param __HANDLE__ specifies the SMARTCARD Handle.
- * @param __FLAG__ specifies the flag to check.
- * This parameter can be one of the following values:
- * @arg @ref SMARTCARD_FLAG_TCBGT Transmission complete before guard time flag (when flag available)
- * @arg @ref SMARTCARD_FLAG_REACK Receive enable acknowledge flag
- * @arg @ref SMARTCARD_FLAG_TEACK Transmit enable acknowledge flag
- * @arg @ref SMARTCARD_FLAG_BUSY Busy flag
- * @arg @ref SMARTCARD_FLAG_EOBF End of block flag
- * @arg @ref SMARTCARD_FLAG_RTOF Receiver timeout flag
- * @arg @ref SMARTCARD_FLAG_TXE Transmit data register empty flag
- * @arg @ref SMARTCARD_FLAG_TC Transmission complete flag
- * @arg @ref SMARTCARD_FLAG_RXNE Receive data register not empty flag
- * @arg @ref SMARTCARD_FLAG_IDLE Idle line detection flag
- * @arg @ref SMARTCARD_FLAG_ORE Overrun error flag
- * @arg @ref SMARTCARD_FLAG_NE Noise error flag
- * @arg @ref SMARTCARD_FLAG_FE Framing error flag
- * @arg @ref SMARTCARD_FLAG_PE Parity error flag
- * @retval The new state of __FLAG__ (TRUE or FALSE).
- */
-#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
-
-/** @brief Enable the specified SmartCard interrupt.
- * @param __HANDLE__ specifies the SMARTCARD Handle.
- * @param __INTERRUPT__ specifies the SMARTCARD interrupt to enable.
- * This parameter can be one of the following values:
- * @arg @ref SMARTCARD_IT_EOB End of block interrupt
- * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt
- * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt
- * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt
- * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time interrupt (when interruption available)
- * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt
- * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt
- * @arg @ref SMARTCARD_IT_PE Parity error interrupt
- * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error)
- * @retval None
- */
-#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & SMARTCARD_CR_MASK) >> SMARTCARD_CR_POS) == 1U)? ((__HANDLE__)->Instance->CR1 |= ((uint32_t)1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
- ((((__INTERRUPT__) & SMARTCARD_CR_MASK) >> SMARTCARD_CR_POS) == 2U)? ((__HANDLE__)->Instance->CR2 |= ((uint32_t)1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
- ((__HANDLE__)->Instance->CR3 |= ((uint32_t)1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))))
-
-/** @brief Disable the specified SmartCard interrupt.
- * @param __HANDLE__ specifies the SMARTCARD Handle.
- * @param __INTERRUPT__ specifies the SMARTCARD interrupt to disable.
- * This parameter can be one of the following values:
- * @arg @ref SMARTCARD_IT_EOB End of block interrupt
- * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt
- * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt
- * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt
- * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time interrupt (when interruption available)
- * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt
- * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt
- * @arg @ref SMARTCARD_IT_PE Parity error interrupt
- * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error)
- * @retval None
- */
-#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & SMARTCARD_CR_MASK) >> SMARTCARD_CR_POS) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
- ((((__INTERRUPT__) & SMARTCARD_CR_MASK) >> SMARTCARD_CR_POS) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
- ((__HANDLE__)->Instance->CR3 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))))
-
-/** @brief Check whether the specified SmartCard interrupt has occurred or not.
- * @param __HANDLE__ specifies the SMARTCARD Handle.
- * @param __INTERRUPT__ specifies the SMARTCARD interrupt to check.
- * This parameter can be one of the following values:
- * @arg @ref SMARTCARD_IT_EOB End of block interrupt
- * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt
- * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt
- * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt
- * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time interrupt (when interruption available)
- * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt
- * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt
- * @arg @ref SMARTCARD_IT_PE Parity error interrupt
- * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error)
- * @retval The new state of __INTERRUPT__ (SET or RESET).
- */
-#define __HAL_SMARTCARD_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR\
- & ((uint32_t)0x01U << (((__INTERRUPT__) & SMARTCARD_ISR_MASK)>> SMARTCARD_ISR_POS))) != 0U) ? SET : RESET)
-
-/** @brief Check whether the specified SmartCard interrupt source is enabled or not.
- * @param __HANDLE__ specifies the SMARTCARD Handle.
- * @param __INTERRUPT__ specifies the SMARTCARD interrupt source to check.
- * This parameter can be one of the following values:
- * @arg @ref SMARTCARD_IT_EOB End of block interrupt
- * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt
- * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt
- * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt
- * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time interrupt (when interruption available)
- * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt
- * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt
- * @arg @ref SMARTCARD_IT_PE Parity error interrupt
- * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error)
- * @retval The new state of __INTERRUPT__ (SET or RESET).
- */
-#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((__INTERRUPT__) & SMARTCARD_CR_MASK) >> SMARTCARD_CR_POS) == 0x01U)? (__HANDLE__)->Instance->CR1 : \
- (((((__INTERRUPT__) & SMARTCARD_CR_MASK) >> SMARTCARD_CR_POS) == 0x02U)? (__HANDLE__)->Instance->CR2 : \
- (__HANDLE__)->Instance->CR3)) & ((uint32_t)0x01U << (((uint16_t)(__INTERRUPT__)) & SMARTCARD_IT_MASK))) != 0U) ? SET : RESET)
-
-/** @brief Clear the specified SMARTCARD ISR flag, in setting the proper ICR register flag.
- * @param __HANDLE__ specifies the SMARTCARD Handle.
- * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set
- * to clear the corresponding interrupt.
- * This parameter can be one of the following values:
- * @arg @ref SMARTCARD_CLEAR_PEF Parity error clear flag
- * @arg @ref SMARTCARD_CLEAR_FEF Framing error clear flag
- * @arg @ref SMARTCARD_CLEAR_NEF Noise detected clear flag
- * @arg @ref SMARTCARD_CLEAR_OREF OverRun error clear flag
- * @arg @ref SMARTCARD_CLEAR_IDLEF Idle line detection clear flag
- * @arg @ref SMARTCARD_CLEAR_TCF Transmission complete clear flag
- * @arg @ref SMARTCARD_CLEAR_TCBGTF Transmission complete before guard time clear flag (when flag available)
- * @arg @ref SMARTCARD_CLEAR_RTOF Receiver timeout clear flag
- * @arg @ref SMARTCARD_CLEAR_EOBF End of block clear flag
- * @retval None
- */
-#define __HAL_SMARTCARD_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR |= (uint32_t)(__IT_CLEAR__))
-
-/** @brief Set a specific SMARTCARD request flag.
- * @param __HANDLE__ specifies the SMARTCARD Handle.
- * @param __REQ__ specifies the request flag to set
- * This parameter can be one of the following values:
- * @arg @ref SMARTCARD_RXDATA_FLUSH_REQUEST Receive data flush Request
- * @arg @ref SMARTCARD_TXDATA_FLUSH_REQUEST Transmit data flush Request
- * @retval None
- */
-#define __HAL_SMARTCARD_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
-
-/** @brief Enable the SMARTCARD one bit sample method.
- * @param __HANDLE__ specifies the SMARTCARD Handle.
- * @retval None
- */
-#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
-
-/** @brief Disable the SMARTCARD one bit sample method.
- * @param __HANDLE__ specifies the SMARTCARD Handle.
- * @retval None
- */
-#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3\
- &= (uint32_t)~((uint32_t)USART_CR3_ONEBIT))
-
-/** @brief Enable the USART associated to the SMARTCARD Handle.
- * @param __HANDLE__ specifies the SMARTCARD Handle.
- * @retval None
- */
-#define __HAL_SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
-
-/** @brief Disable the USART associated to the SMARTCARD Handle
- * @param __HANDLE__ specifies the SMARTCARD Handle.
- * @retval None
- */
-#define __HAL_SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
-
-/**
- * @}
- */
-
-/* Private macros -------------------------------------------------------------*/
-/** @defgroup SMARTCARD_Private_Macros SMARTCARD Private Macros
- * @{
- */
-
-
-/** @brief Check the Baud rate range.
- * @note The maximum Baud Rate is derived from the maximum clock on F0 (48 MHz)
- * divided by the oversampling used on the SMARTCARD (i.e. 16).
- * @param __BAUDRATE__ Baud rate set by the configuration function.
- * @retval Test result (TRUE or FALSE)
- */
-#define IS_SMARTCARD_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 6000000U)
-
-/** @brief Check the block length range.
- * @note The maximum SMARTCARD block length is 0xFF.
- * @param __LENGTH__ block length.
- * @retval Test result (TRUE or FALSE)
- */
-#define IS_SMARTCARD_BLOCKLENGTH(__LENGTH__) ((__LENGTH__) <= 0xFFU)
-
-/** @brief Check the receiver timeout value.
- * @note The maximum SMARTCARD receiver timeout value is 0xFFFFFF.
- * @param __TIMEOUTVALUE__ receiver timeout value.
- * @retval Test result (TRUE or FALSE)
- */
-#define IS_SMARTCARD_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFFU)
-
-/** @brief Check the SMARTCARD autoretry counter value.
- * @note The maximum number of retransmissions is 0x7.
- * @param __COUNT__ number of retransmissions.
- * @retval Test result (TRUE or FALSE)
- */
-#define IS_SMARTCARD_AUTORETRY_COUNT(__COUNT__) ((__COUNT__) <= 0x7U)
-
-/** @brief Ensure that SMARTCARD frame length is valid.
- * @param __LENGTH__ SMARTCARD frame length.
- * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid)
- */
-#define IS_SMARTCARD_WORD_LENGTH(__LENGTH__) ((__LENGTH__) == SMARTCARD_WORDLENGTH_9B)
-
-/** @brief Ensure that SMARTCARD frame number of stop bits is valid.
- * @param __STOPBITS__ SMARTCARD frame number of stop bits.
- * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid)
- */
-#define IS_SMARTCARD_STOPBITS(__STOPBITS__) (((__STOPBITS__) == SMARTCARD_STOPBITS_0_5) ||\
- ((__STOPBITS__) == SMARTCARD_STOPBITS_1_5))
-
-/** @brief Ensure that SMARTCARD frame parity is valid.
- * @param __PARITY__ SMARTCARD frame parity.
- * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid)
- */
-#define IS_SMARTCARD_PARITY(__PARITY__) (((__PARITY__) == SMARTCARD_PARITY_EVEN) || \
- ((__PARITY__) == SMARTCARD_PARITY_ODD))
-
-/** @brief Ensure that SMARTCARD communication mode is valid.
- * @param __MODE__ SMARTCARD communication mode.
- * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
- */
-#define IS_SMARTCARD_MODE(__MODE__) ((((__MODE__) & 0xFFF3U) == 0x00U) && ((__MODE__) != 0x00U))
-
-/** @brief Ensure that SMARTCARD frame polarity is valid.
- * @param __CPOL__ SMARTCARD frame polarity.
- * @retval SET (__CPOL__ is valid) or RESET (__CPOL__ is invalid)
- */
-#define IS_SMARTCARD_POLARITY(__CPOL__) (((__CPOL__) == SMARTCARD_POLARITY_LOW)\
- || ((__CPOL__) == SMARTCARD_POLARITY_HIGH))
-
-/** @brief Ensure that SMARTCARD frame phase is valid.
- * @param __CPHA__ SMARTCARD frame phase.
- * @retval SET (__CPHA__ is valid) or RESET (__CPHA__ is invalid)
- */
-#define IS_SMARTCARD_PHASE(__CPHA__) (((__CPHA__) == SMARTCARD_PHASE_1EDGE) || ((__CPHA__) == SMARTCARD_PHASE_2EDGE))
-
-/** @brief Ensure that SMARTCARD frame last bit clock pulse setting is valid.
- * @param __LASTBIT__ SMARTCARD frame last bit clock pulse setting.
- * @retval SET (__LASTBIT__ is valid) or RESET (__LASTBIT__ is invalid)
- */
-#define IS_SMARTCARD_LASTBIT(__LASTBIT__) (((__LASTBIT__) == SMARTCARD_LASTBIT_DISABLE) || \
- ((__LASTBIT__) == SMARTCARD_LASTBIT_ENABLE))
-
-/** @brief Ensure that SMARTCARD frame sampling is valid.
- * @param __ONEBIT__ SMARTCARD frame sampling.
- * @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid)
- */
-#define IS_SMARTCARD_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == SMARTCARD_ONE_BIT_SAMPLE_DISABLE) || \
- ((__ONEBIT__) == SMARTCARD_ONE_BIT_SAMPLE_ENABLE))
-
-/** @brief Ensure that SMARTCARD NACK transmission setting is valid.
- * @param __NACK__ SMARTCARD NACK transmission setting.
- * @retval SET (__NACK__ is valid) or RESET (__NACK__ is invalid)
- */
-#define IS_SMARTCARD_NACK(__NACK__) (((__NACK__) == SMARTCARD_NACK_ENABLE) || \
- ((__NACK__) == SMARTCARD_NACK_DISABLE))
-
-/** @brief Ensure that SMARTCARD receiver timeout setting is valid.
- * @param __TIMEOUT__ SMARTCARD receiver timeout setting.
- * @retval SET (__TIMEOUT__ is valid) or RESET (__TIMEOUT__ is invalid)
- */
-#define IS_SMARTCARD_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == SMARTCARD_TIMEOUT_DISABLE) || \
- ((__TIMEOUT__) == SMARTCARD_TIMEOUT_ENABLE))
-
-/** @brief Ensure that SMARTCARD advanced features initialization is valid.
- * @param __INIT__ SMARTCARD advanced features initialization.
- * @retval SET (__INIT__ is valid) or RESET (__INIT__ is invalid)
- */
-#define IS_SMARTCARD_ADVFEATURE_INIT(__INIT__) ((__INIT__) <= (SMARTCARD_ADVFEATURE_NO_INIT | \
- SMARTCARD_ADVFEATURE_TXINVERT_INIT | \
- SMARTCARD_ADVFEATURE_RXINVERT_INIT | \
- SMARTCARD_ADVFEATURE_DATAINVERT_INIT | \
- SMARTCARD_ADVFEATURE_SWAP_INIT | \
- SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT | \
- SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT | \
- SMARTCARD_ADVFEATURE_MSBFIRST_INIT))
-
-/** @brief Ensure that SMARTCARD frame TX inversion setting is valid.
- * @param __TXINV__ SMARTCARD frame TX inversion setting.
- * @retval SET (__TXINV__ is valid) or RESET (__TXINV__ is invalid)
- */
-#define IS_SMARTCARD_ADVFEATURE_TXINV(__TXINV__) (((__TXINV__) == SMARTCARD_ADVFEATURE_TXINV_DISABLE) || \
- ((__TXINV__) == SMARTCARD_ADVFEATURE_TXINV_ENABLE))
-
-/** @brief Ensure that SMARTCARD frame RX inversion setting is valid.
- * @param __RXINV__ SMARTCARD frame RX inversion setting.
- * @retval SET (__RXINV__ is valid) or RESET (__RXINV__ is invalid)
- */
-#define IS_SMARTCARD_ADVFEATURE_RXINV(__RXINV__) (((__RXINV__) == SMARTCARD_ADVFEATURE_RXINV_DISABLE) || \
- ((__RXINV__) == SMARTCARD_ADVFEATURE_RXINV_ENABLE))
-
-/** @brief Ensure that SMARTCARD frame data inversion setting is valid.
- * @param __DATAINV__ SMARTCARD frame data inversion setting.
- * @retval SET (__DATAINV__ is valid) or RESET (__DATAINV__ is invalid)
- */
-#define IS_SMARTCARD_ADVFEATURE_DATAINV(__DATAINV__) (((__DATAINV__) == SMARTCARD_ADVFEATURE_DATAINV_DISABLE) || \
- ((__DATAINV__) == SMARTCARD_ADVFEATURE_DATAINV_ENABLE))
-
-/** @brief Ensure that SMARTCARD frame RX/TX pins swap setting is valid.
- * @param __SWAP__ SMARTCARD frame RX/TX pins swap setting.
- * @retval SET (__SWAP__ is valid) or RESET (__SWAP__ is invalid)
- */
-#define IS_SMARTCARD_ADVFEATURE_SWAP(__SWAP__) (((__SWAP__) == SMARTCARD_ADVFEATURE_SWAP_DISABLE) || \
- ((__SWAP__) == SMARTCARD_ADVFEATURE_SWAP_ENABLE))
-
-/** @brief Ensure that SMARTCARD frame overrun setting is valid.
- * @param __OVERRUN__ SMARTCARD frame overrun setting.
- * @retval SET (__OVERRUN__ is valid) or RESET (__OVERRUN__ is invalid)
- */
-#define IS_SMARTCARD_OVERRUN(__OVERRUN__) (((__OVERRUN__) == SMARTCARD_ADVFEATURE_OVERRUN_ENABLE) || \
- ((__OVERRUN__) == SMARTCARD_ADVFEATURE_OVERRUN_DISABLE))
-
-/** @brief Ensure that SMARTCARD DMA enabling or disabling on error setting is valid.
- * @param __DMA__ SMARTCARD DMA enabling or disabling on error setting.
- * @retval SET (__DMA__ is valid) or RESET (__DMA__ is invalid)
- */
-#define IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(__DMA__) (((__DMA__) == SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR) || \
- ((__DMA__) == SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR))
-
-/** @brief Ensure that SMARTCARD frame MSB first setting is valid.
- * @param __MSBFIRST__ SMARTCARD frame MSB first setting.
- * @retval SET (__MSBFIRST__ is valid) or RESET (__MSBFIRST__ is invalid)
- */
-#define IS_SMARTCARD_ADVFEATURE_MSBFIRST(__MSBFIRST__) (((__MSBFIRST__) == SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE) || \
- ((__MSBFIRST__) == SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE))
-
-/** @brief Ensure that SMARTCARD request parameter is valid.
- * @param __PARAM__ SMARTCARD request parameter.
- * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid)
- */
-#define IS_SMARTCARD_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == SMARTCARD_RXDATA_FLUSH_REQUEST) || \
- ((__PARAM__) == SMARTCARD_TXDATA_FLUSH_REQUEST))
-
-/**
- * @}
- */
-
-/* Include SMARTCARD HAL Extended module */
-#include "stm32f0xx_hal_smartcard_ex.h"
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup SMARTCARD_Exported_Functions
- * @{
- */
-
-/* Initialization and de-initialization functions ****************************/
-/** @addtogroup SMARTCARD_Exported_Functions_Group1
- * @{
- */
-
-HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsmartcard);
-HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsmartcard);
-void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsmartcard);
-void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsmartcard);
-
-#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
-/* Callbacks Register/UnRegister functions ***********************************/
-HAL_StatusTypeDef HAL_SMARTCARD_RegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard,
- HAL_SMARTCARD_CallbackIDTypeDef CallbackID, pSMARTCARD_CallbackTypeDef pCallback);
-HAL_StatusTypeDef HAL_SMARTCARD_UnRegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard,
- HAL_SMARTCARD_CallbackIDTypeDef CallbackID);
-#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */
-
-/**
- * @}
- */
-
-/* IO operation functions *****************************************************/
-/** @addtogroup SMARTCARD_Exported_Functions_Group2
- * @{
- */
-
-HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size,
- uint32_t Timeout);
-HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size,
- uint32_t Timeout);
-HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
-/* Transfer Abort functions */
-HAL_StatusTypeDef HAL_SMARTCARD_Abort(SMARTCARD_HandleTypeDef *hsmartcard);
-HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit(SMARTCARD_HandleTypeDef *hsmartcard);
-HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive(SMARTCARD_HandleTypeDef *hsmartcard);
-HAL_StatusTypeDef HAL_SMARTCARD_Abort_IT(SMARTCARD_HandleTypeDef *hsmartcard);
-HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard);
-HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive_IT(SMARTCARD_HandleTypeDef *hsmartcard);
-
-void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsmartcard);
-void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard);
-void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard);
-void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsmartcard);
-void HAL_SMARTCARD_AbortCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard);
-void HAL_SMARTCARD_AbortTransmitCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard);
-void HAL_SMARTCARD_AbortReceiveCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard);
-
-/**
- * @}
- */
-
-/* Peripheral State and Error functions ***************************************/
-/** @addtogroup SMARTCARD_Exported_Functions_Group4
- * @{
- */
-
-HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsmartcard);
-uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsmartcard);
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* STM32F0xx_HAL_SMARTCARD_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|